In this paper, a design of very compact microstrip bandstop filters based on complementary split ring resonators (CSRRs) is proposed. Two techniques of metamaterial miniaturization are used to optimize the physical an...In this paper, a design of very compact microstrip bandstop filters based on complementary split ring resonators (CSRRs) is proposed. Two techniques of metamaterial miniaturization are used to optimize the physical and electrical size of the CSRR. The bandstop filter is produced by an array of miniaturized loaded CSRRs etched on the center line of a microstrip. The size of the proposed filter, is as small as 0.58 cm2, and its electrical length is very small with only 0.08 λ0), compared to a conventional bandstop filter, a miniaturization of a factor 5 while the bandstop performance is maintained. A very good agreement obtained between the measurement and the simulation results.展开更多
Three dual-mode band-pass filters are presented in the present paper. The first filter is realized by dual-mode substrate integrated waveguide (SIW) cavity;the second is based on the integration of SIW cavity with ele...Three dual-mode band-pass filters are presented in the present paper. The first filter is realized by dual-mode substrate integrated waveguide (SIW) cavity;the second is based on the integration of SIW cavity with electromagnetic band gap (EBG);and the third is based on the integration of SIW cavity with complementary split ring resonator (CSRR). The dual-mode SIW cavity is designed to have a fractional bandwidth of 4.95% at the midband frequency of 9.08 GHz;the proposed EBG-SIW resonator operates at 9.12 GHz with a bandwidth of 4.38% and the CSRR-SIW resonator operates at 8.66 GHz with a bandwidth of 2.54%. The proposed filters have the high Q-factors and generate a transmission zero in upper stopband, and these by the use of Rogers RT/duriod 5880 (tm).展开更多
In this paper, we proposed a 2-channel demultiplexer based on photonic crystal ring resonator （PCRR）. For performing wavelength selection, we used two ring resonators, two different wavelengths were obtained by usin...In this paper, we proposed a 2-channel demultiplexer based on photonic crystal ring resonator （PCRR）. For performing wavelength selection, we used two ring resonators, two different wavelengths were obtained by using two resonant rings with different values for the radius of dielectric rods. All the simulations and calculations have been done using Rsoft Photonic CAD software, which employs finite difference time domain （FDTD） method. The output channels were respectively at 1590.8 and 1593.8nm, correspondingly had the quality factors of 7954 and 3984, the crosstalk values of -22 and -11 dB separately. The total footprint of our proposed structure is 681.36 μm2. Results suggest that 2-channels in the proposed structure are characterized with high transmission efficiency and low band width, resulting in a very sharp output spectrum and high quality factor values.展开更多
文摘In this paper, a design of very compact microstrip bandstop filters based on complementary split ring resonators (CSRRs) is proposed. Two techniques of metamaterial miniaturization are used to optimize the physical and electrical size of the CSRR. The bandstop filter is produced by an array of miniaturized loaded CSRRs etched on the center line of a microstrip. The size of the proposed filter, is as small as 0.58 cm2, and its electrical length is very small with only 0.08 λ0), compared to a conventional bandstop filter, a miniaturization of a factor 5 while the bandstop performance is maintained. A very good agreement obtained between the measurement and the simulation results.
文摘Three dual-mode band-pass filters are presented in the present paper. The first filter is realized by dual-mode substrate integrated waveguide (SIW) cavity;the second is based on the integration of SIW cavity with electromagnetic band gap (EBG);and the third is based on the integration of SIW cavity with complementary split ring resonator (CSRR). The dual-mode SIW cavity is designed to have a fractional bandwidth of 4.95% at the midband frequency of 9.08 GHz;the proposed EBG-SIW resonator operates at 9.12 GHz with a bandwidth of 4.38% and the CSRR-SIW resonator operates at 8.66 GHz with a bandwidth of 2.54%. The proposed filters have the high Q-factors and generate a transmission zero in upper stopband, and these by the use of Rogers RT/duriod 5880 (tm).
文摘In this paper, we proposed a 2-channel demultiplexer based on photonic crystal ring resonator （PCRR）. For performing wavelength selection, we used two ring resonators, two different wavelengths were obtained by using two resonant rings with different values for the radius of dielectric rods. All the simulations and calculations have been done using Rsoft Photonic CAD software, which employs finite difference time domain （FDTD） method. The output channels were respectively at 1590.8 and 1593.8nm, correspondingly had the quality factors of 7954 and 3984, the crosstalk values of -22 and -11 dB separately. The total footprint of our proposed structure is 681.36 μm2. Results suggest that 2-channels in the proposed structure are characterized with high transmission efficiency and low band width, resulting in a very sharp output spectrum and high quality factor values.
