A new method of constructing regular low-density parity-check (LDPC) codes was proposed. And the novel class of LDPC codes was applied in a coded orthogonal frequency division multiplexing (OFDM) system. This method e...A new method of constructing regular low-density parity-check (LDPC) codes was proposed. And the novel class of LDPC codes was applied in a coded orthogonal frequency division multiplexing (OFDM) system. This method extended the class of LDPC codes which could be constructed from shifted identity matrices. The method could avoid short cycles in Tanner graphs with simple inequation in the construction of shifting identity matrices, which made the girth of Tanner graphs 8. Because of the quasicyclic structure and the inherent block configuration of parity-check matrices, the encoders and the decoders were practically feasible. They were linear-time encodable and decodable. The LDPC codes proposed had various code rates, ranging from low to high. They performed excellently with iterative decoding and demonstrate better performance than other regular LDPC codes in OFDM systems.展开更多
Multiple antenna wireless systems can provide larger channel capacity and enable spatial diversity to combat fading. In this paper we conduct an investigation into the design of coded space-time system obtained by ser...Multiple antenna wireless systems can provide larger channel capacity and enable spatial diversity to combat fading. In this paper we conduct an investigation into the design of coded space-time system obtained by serially concatenating channel code module and space-time code module with an interleaver in between. As an example, the system is constructed by employing low decoding complexity turbo-SPC （single parity check） code as outer module and linear complex field space-time code as inner module, which achieves full diversity and lossless equivalent channel capacity. Simulation results prove that our designed system performs well and it only loses 0.8 dB from multiple-input multiple-output （MIMO） capacity at BER = 10^-5 in the case of information bit length 6048. Compared with turbo code-based systems, it also has lower error floor.展开更多
A new space-time(ST)code design is proposed based on the design criteria of space-time codes,which is applied to the MIMO systems with fewer receive antennas than transmit antennas.The space-time codes,referred to as ...A new space-time(ST)code design is proposed based on the design criteria of space-time codes,which is applied to the MIMO systems with fewer receive antennas than transmit antennas.The space-time codes,referred to as full diversity lossless capacity(FDLLC)ST code,achieve full transmit diversity and lossless equivalent channel capacity for ST precoded systems.Combined FDLLC-ST codes with channel codes,ST bit interleaved coded modulation(ST-BICM)system is constructed and an iterative detector/decoder is employed at the receiver.Simulations are presented.It is proved that the proposed design has good performance compared with other ST precoded MIMO systems.展开更多
In Systems Biology, system identification, which infers regulatory network in genetic system and metabolic pathways using experimentally observed time-course data, is one of the hottest issues. The efficient numerical...In Systems Biology, system identification, which infers regulatory network in genetic system and metabolic pathways using experimentally observed time-course data, is one of the hottest issues. The efficient numerical optimization algorithm to estimate more than 100 real-coded parameters should be developed for this purpose. New real-coded genetic algorithm (RCGA), the combination of AREX (adaptive real-coded ensemble crossover) with JGG (just generation gap), have applied to the inference of genetic interactions involving more than 100 parameters related to the interactions with using experimentally observed time-course data. Compared with conventional RCGA, the combination of UNDX (unimodal normal distribution crossover) with MGG (minimal generation gap), new algorithm has shown the superiority with improving early convergence in the first stage of search and suppressing evolutionary stagnation in the last stage of search.展开更多
In order to improve the spectrum efficiency of the high-order polar coded modulation systems, the polar code is used as the component code of the bit-interleave coded modulation(BICM) system, a novel bit mapping schem...In order to improve the spectrum efficiency of the high-order polar coded modulation systems, the polar code is used as the component code of the bit-interleave coded modulation(BICM) system, a novel bit mapping scheme is proposed considering of the channel polarization and successive cancellation(SC) decoding principle of polar codes as well as the unequal protection of equivalent channels by modulator. In this scheme, the frozen bits on the unreliable split channel are allocated to the equivalent channel with the low protection of the modulator, while the equivalent channels with the high protection are used to transmit the information bits. Thus, the error-correcting performance of polar codes is improved. Compared with some bit mapping schemes, the proposed bit mapping scheme only needs to divide and choose the parameters of the split channels reliability measurement, the complexity does not increase obviously, and simulation results show that the proposed scheme has the better performance under the quadrature amplitude modulation(QAM) modulation based on the Gray mapping.展开更多
In this paper, the main objective is to identify the parameters of motors, which includes a brushless direct current (BLDC) motor and an induction motor. The motor systems are dynamically formulated by the mechanical ...In this paper, the main objective is to identify the parameters of motors, which includes a brushless direct current (BLDC) motor and an induction motor. The motor systems are dynamically formulated by the mechanical and electrical equations. The real-coded genetic algorithm (RGA) is adopted to identify all parameters of motors, and the standard genetic algorithm (SRGA) and various adaptive genetic algorithm (ARGAs) are compared in the rotational angular speeds and fitness values, which are the inverse of square differences of angular speeds. From numerical simulations and experimental results, it is found that the SRGA and ARGA are feasible, the ARGA can effectively solve the problems with slow convergent speed and premature phenomenon, and is more accurate in identifying system’s parameters than the SRGA. From the comparisons of the ARGAs in identifying parameters of motors, the best ARGA method is obtained and could be applied to any other mechatronic systems.展开更多
In distributed cloud storage systems, inevitably there exist multiple node failures at the same time. The existing methods of regenerating codes, including minimum storage regenerating(MSR) codes and minimum bandwidth...In distributed cloud storage systems, inevitably there exist multiple node failures at the same time. The existing methods of regenerating codes, including minimum storage regenerating(MSR) codes and minimum bandwidth regenerating(MBR) codes, are mainly to repair one single or several failed nodes, unable to meet the repair need of distributed cloud storage systems. In this paper, we present locally minimum storage regenerating(LMSR) codes to recover multiple failed nodes at the same time. Specifically, the nodes in distributed cloud storage systems are divided into multiple local groups, and in each local group(4, 2) or(5, 3) MSR codes are constructed. Moreover, the grouping method of storage nodes and the repairing process of failed nodes in local groups are studied. Theoretical analysis shows that LMSR codes can achieve the same storage overhead as MSR codes. Furthermore, we verify by means of simulation that, compared with MSR codes, LMSR codes can reduce the repair bandwidth and disk I/O overhead effectively.展开更多
According to the requirements of the increasing development for optical transmission systems,a novel construction method of quasi-cyclic low-density parity-check(QC-LDPC) codes based on the subgroup of the finite fiel...According to the requirements of the increasing development for optical transmission systems,a novel construction method of quasi-cyclic low-density parity-check(QC-LDPC) codes based on the subgroup of the finite field multiplicative group is proposed.Furthermore,this construction method can effectively avoid the girth-4 phenomena and has the advantages such as simpler construction,easier implementation,lower encoding/decoding complexity,better girth properties and more flexible adjustment for the code length and code rate.The simulation results show that the error correction performance of the QC-LDPC(3 780,3 540) code with the code rate of 93.7% constructed by this proposed method is excellent,its net coding gain is respectively 0.3dB,0.55dB,1.4dB and 1.98dB higher than those of the QC-LDPC(5 334,4 962) code constructed by the method based on the inverse element characteristics in the finite field multiplicative group,the SCG-LDPC(3 969,3 720) code constructed by the systematically constructed Gallager(SCG) random construction method,the LDPC(32 640,30 592) code in ITU-T G.975.1 and the classic RS(255,239) code which is widely used in optical transmission systems in ITU-T G.975 at the bit error rate(BER) of 10-7.Therefore,the constructed QC-LDPC(3 780,3 540) code is more suitable for optical transmission systems.展开更多
An efficient LDPC-coded multi-relay cooperation architecture is proposed based on virtual vertical Bell Labs layered space-time （V-BLAST） processing for uplink communication, where minimum-mean-square-error （MMSE）...An efficient LDPC-coded multi-relay cooperation architecture is proposed based on virtual vertical Bell Labs layered space-time （V-BLAST） processing for uplink communication, where minimum-mean-square-error （MMSE） and BP-based joint iterative decoding based on the introduced muhi-layer Tanner graph are effectively de- signed to detect and decode the corrupted received sequence at the destination. By introducing V-BLAST transmis- sion to the coded multi-relay cooperation, relays send their streams of symbols simultaneously, which increases the data rate and significantly reduces the transmission delay. The theoretical analysis and numerical results show that the new LDPC coded cooperation scheme outperforms the coded non-cooperation under the same code rate, and it also achieves a good trade-off among the performance, signal delay, and the encoding complexity associated with the number of relays. The performance gain can be credited to the proposed V-BLAST processing architecture and BP-based joint iterative decoding by the introduced multi-layer Tanner graph at a receiver-side.展开更多
The improved three novel schemes of the super forward error correction （super-FEC） concatenated codes are proposed after the development trend of long-haul optical transmission systems and the defects of the existin...The improved three novel schemes of the super forward error correction （super-FEC） concatenated codes are proposed after the development trend of long-haul optical transmission systems and the defects of the existing FEC codes have been analyzed. The performance simulation of the Reed-Solomon（RS）＋ Bose-Chaudhuri-Hocguenghem（BCH） inner-outer serial concatenated code is implemented and the conceptions of encoding/decoding the parallel-concatenated code are presented. Furthermore, the simulation results for the RS（255,239） ＋RS（255,239） code and the RS（255,239） ＋RS（255,223） code show that the two consecutive concatenated codes are a superior coding scheme with such advantages as the better error correction, moderate redundancy and easy realization compared to the classic RS（255,239） code and other codes, and their signal to noise ratio gains are respectively 2-3 dB more than that of the RS（255,239）code at the bit error rate of 1 × 10^-13. Finally, the frame structure of the novel consecutive concatenated code is arranged to lay a firm foundation in designing its hardware.展开更多
Digital Communications, in relation to wireless networks, have taken off in recent years due to the expanding need to communicate faster and more efficiently. A popular way to achieve this is by using wireless Multipl...Digital Communications, in relation to wireless networks, have taken off in recent years due to the expanding need to communicate faster and more efficiently. A popular way to achieve this is by using wireless Multiple Input Multiple Output (MIMO) communication systems. MIMO systems utilize Space Time Block Codes (STBC) as one of the leading ways to obtain higher data rates with limited bandwidth and power. With several STBC methods currently available, this paper analyzes simulations using Orthogonal Space Time Block Codes (OSTBC) in Rayleigh fading channels to evaluate the performance of MIMO systems. The selection to use a Rayleigh fading channel as a model for a non-line-of-sight (nLOS) environment is selected to mimic installations where a large number of signal paths and reflections are expected. All simulations are coded, generated and plotted using MATLAB resulting in graphical data representing the bit-error rate (BER) to signal-to-noise ratio (Eb/N<sub>0</sub>) or SNR. Each simulation captures how different configurations of key variables including code rate, diversity and antenna count can impact system performance. Four modulation schemes (BPSK, QPSK, 16-QAM and 64-QAM) are included in each simulation. Conclusive evidence based upon these simulations suggests higher diversity gains were achieved with a greater number of antennas. The most significant factor for increasing system performance was using a lower count of transmit antennas with a higher count of receive antennas.展开更多
A new concatenated code of RS（255,239）＋BCH（2 040,1 930） code to he suitable for WDM optical transmission systems is proposed. The simulation resuhs show that this new concatenated code. compared with the RS（255,...A new concatenated code of RS（255,239）＋BCH（2 040,1 930） code to he suitable for WDM optical transmission systems is proposed. The simulation resuhs show that this new concatenated code. compared with the RS（255,239）4-CSOC（k0/n0=6/7, J= 8） code in ITU-TG. 75.1, has a lower redundancy and better error-correction performance, furthermore, its net coding gain（NCG） is respectively 0. 46 dB, 0.43 dB morethanthatofRS（255,239）＋CSOC（k0/n0= 6/7, J= 8） code and BCH（3860,3824）＋BCH （2 040,1 930） code in ITU TG. 75. 1 at the third iteration for the bit error rate（BER） of 10^-12. Therefore, the new super forward error correction（Super-FEC） concatenated code can be better used in ultra long-haul, ultra large-capacity and ultra high-speed WDM optical communication systems.展开更多
Ever-changing market conditions and a rapidly changing IT landscape call for fast and cheap ways to meet software demands. In order to tackle these problems, low-code development platforms (LCDPs) have emerged. These ...Ever-changing market conditions and a rapidly changing IT landscape call for fast and cheap ways to meet software demands. In order to tackle these problems, low-code development platforms (LCDPs) have emerged. These platforms are designed with the idea to limit recurring traditional hand-coding and programming. This article provides a theoretical overview of low-code solutions. The advantages and disadvantages of using LCDP in the creation of automated systems are considered. In conclusion, a conclusion is formulated about the prospects of using low-code technology.展开更多
A new segmented correlating decoder of synchronous optical CDMA using modified prime sequence codes is proposed. The performance of the proposed system is analyzed under the assumption of Poisson shot noise model for ...A new segmented correlating decoder of synchronous optical CDMA using modified prime sequence codes is proposed. The performance of the proposed system is analyzed under the assumption of Poisson shot noise model for the receiver photodetector. The decoder technique is shown to be more effective to improve the bit error probability performance than the method using an optical hard-limiter.展开更多
By exploiting the structural features of L1C messages,a novel Early Termination( ET) strategy is proposed to speed up the decoding of low-density parity-check( LDPC) codes in the GPS system. The proposed strategy is b...By exploiting the structural features of L1C messages,a novel Early Termination( ET) strategy is proposed to speed up the decoding of low-density parity-check( LDPC) codes in the GPS system. The proposed strategy is based on the cyclic redundancy check( CRC) of the messages in the subframes 2 and 3. The simulation results show that average number of iterations of the proposed strategy is less than that of the standard ET strategy,with nearly no degradation in decoding performance. Besides,the proposed ET strategy can be efficiently implemented in a sequential or parallel manner. Thus,the proposed ET strategy is attractive for practical purposes.展开更多
Although there are appropriate stipulations for the chattel guarantees in the law of China, this guarantee system could not adapt to the request of economy's development because of the following reasons: the scope...Although there are appropriate stipulations for the chattel guarantees in the law of China, this guarantee system could not adapt to the request of economy's development because of the following reasons: the scope of chattel guarantees is narrow according to relevant stipulations; the transaction cost of the chattel is high; mortgage registration of chattel is in a mess; lack of efficiently executive guarantee system, etc. To counter the problems existing in the present Chinese chattel guarantee system, in this article, the author proposed some corresponding suggestions and countermeasures, hoping to perfect the chattel guarantee system in China.展开更多
Reliability of power systems is a key aspect in modern power system planning, design, and operation. The ascendance of the smart grid concept has provided high hopes of developing an intelligent network that is capabl...Reliability of power systems is a key aspect in modern power system planning, design, and operation. The ascendance of the smart grid concept has provided high hopes of developing an intelligent network that is capable of being a self-healing grid, offering the ability to overcome the interruption problems that face the utility and cost it tens of millions in repair and loss. In this work, we develop a MATLAB code to examine the effect of the smart grid applications in improving the reliability of the power distribution networks via Monte Carlo Simulation approach. The system used in this paper is the IEEE 34 test feeder. The objective is to measure the installations of the Automatic Reclosers (ARs) as well as the Distributed Generators (DGs) on the reliability indices, SAIDI, SAIFI, CAIDI and EUE, and make comparisons with results from a previous study done by the authors using another approach. The MATLAB code should provide close results to the output of the previous research to verify its effectiveness.展开更多
The paper presents a computer code system 'SRDAAR- QNPP' for the real-time dose as-sessment of an accident release for Qinshan Nuclear Power Plant. It includes three parts:thereal-time data acquisition system,...The paper presents a computer code system 'SRDAAR- QNPP' for the real-time dose as-sessment of an accident release for Qinshan Nuclear Power Plant. It includes three parts:thereal-time data acquisition system, assessment computer. and the assessment operating code system. InSRDAAR-QNPP, the wind field of the surface and the lower levels are determined hourly by using amass consistent three-dimension diasnosis model with the topographic following coordinate system.A Lagrangin Puff model under changing meteorological condition is adopted for atmosphericdispersion, the correction for dry and wet depositions. physical decay and partial plume penetrationof the top inversion and the deviation of plume axis caused by complex terrain have been taken in-to account. The calculation domain areas include three square grid areas with the sideline 10 km, 40krn and 160 km and a grid interval 0.5 km, 2.0 km, 8.0 km respectively. Three exposure pathwaysare taken into account:the external exposure from immersion cloud and passing puff, the internalexposure from inhalation and the external exposure from contaminated ground. This system is ableto provide the results of concentration and dose distributions within 10 minutes after the data havebeen inputed.展开更多
Power control is an important technique in WCDMA mobile systems for both increasing system capacity and guaranteeing the required QoS (time delay and wireless link transmission quality) of multimedia services. The opt...Power control is an important technique in WCDMA mobile systems for both increasing system capacity and guaranteeing the required QoS (time delay and wireless link transmission quality) of multimedia services. The optimum power control for narrow band CDMA cellular systems is a problem of single threshold optimization. Because these systems have only one type of traffic and have the same QoS requirement. However, WCDMA mobile system should provide multimedia services and different types of traffic have different QoS requirements. Thus, the power control in WCDMA mobile systems isn't a problem of single threshold optimizing, but turns into the optimizing problem of multi-threshold. We analyze the power control problem in WCDMA cellular mobile systems and propose the optimum transmitter power control algorithm. Three criteria to optimize transmitter power levels of multi-thresholds based on grading the priority orders of multimedia services are proposed. Simulation results show that the proposed algorithms are more effective than conventional algorithms and can provide better performance for WCDMA cellular mobile systems.展开更多
文摘A new method of constructing regular low-density parity-check (LDPC) codes was proposed. And the novel class of LDPC codes was applied in a coded orthogonal frequency division multiplexing (OFDM) system. This method extended the class of LDPC codes which could be constructed from shifted identity matrices. The method could avoid short cycles in Tanner graphs with simple inequation in the construction of shifting identity matrices, which made the girth of Tanner graphs 8. Because of the quasicyclic structure and the inherent block configuration of parity-check matrices, the encoders and the decoders were practically feasible. They were linear-time encodable and decodable. The LDPC codes proposed had various code rates, ranging from low to high. They performed excellently with iterative decoding and demonstrate better performance than other regular LDPC codes in OFDM systems.
基金supported by the National Natural Science Foundation of China （Grant Nos.60332030, 60572157）, and the National High-TechnologY Research and Development of China （Grant No.863-2003AA123310）
文摘Multiple antenna wireless systems can provide larger channel capacity and enable spatial diversity to combat fading. In this paper we conduct an investigation into the design of coded space-time system obtained by serially concatenating channel code module and space-time code module with an interleaver in between. As an example, the system is constructed by employing low decoding complexity turbo-SPC （single parity check） code as outer module and linear complex field space-time code as inner module, which achieves full diversity and lossless equivalent channel capacity. Simulation results prove that our designed system performs well and it only loses 0.8 dB from multiple-input multiple-output （MIMO） capacity at BER = 10^-5 in the case of information bit length 6048. Compared with turbo code-based systems, it also has lower error floor.
基金Sponsored by the National Natural Science Foundation of China (Grant No. 60332030, 60572157)National High Technology Research and Development of China (Grant No. 2003AA123310)
文摘A new space-time(ST)code design is proposed based on the design criteria of space-time codes,which is applied to the MIMO systems with fewer receive antennas than transmit antennas.The space-time codes,referred to as full diversity lossless capacity(FDLLC)ST code,achieve full transmit diversity and lossless equivalent channel capacity for ST precoded systems.Combined FDLLC-ST codes with channel codes,ST bit interleaved coded modulation(ST-BICM)system is constructed and an iterative detector/decoder is employed at the receiver.Simulations are presented.It is proved that the proposed design has good performance compared with other ST precoded MIMO systems.
文摘In Systems Biology, system identification, which infers regulatory network in genetic system and metabolic pathways using experimentally observed time-course data, is one of the hottest issues. The efficient numerical optimization algorithm to estimate more than 100 real-coded parameters should be developed for this purpose. New real-coded genetic algorithm (RCGA), the combination of AREX (adaptive real-coded ensemble crossover) with JGG (just generation gap), have applied to the inference of genetic interactions involving more than 100 parameters related to the interactions with using experimentally observed time-course data. Compared with conventional RCGA, the combination of UNDX (unimodal normal distribution crossover) with MGG (minimal generation gap), new algorithm has shown the superiority with improving early convergence in the first stage of search and suppressing evolutionary stagnation in the last stage of search.
基金supported by the National High Technology and Development Program of China (No.61971079)the Postgraduate Science Research Innovation project of Chongqing Municipal Education Commission (No.CYS20266)。
文摘In order to improve the spectrum efficiency of the high-order polar coded modulation systems, the polar code is used as the component code of the bit-interleave coded modulation(BICM) system, a novel bit mapping scheme is proposed considering of the channel polarization and successive cancellation(SC) decoding principle of polar codes as well as the unequal protection of equivalent channels by modulator. In this scheme, the frozen bits on the unreliable split channel are allocated to the equivalent channel with the low protection of the modulator, while the equivalent channels with the high protection are used to transmit the information bits. Thus, the error-correcting performance of polar codes is improved. Compared with some bit mapping schemes, the proposed bit mapping scheme only needs to divide and choose the parameters of the split channels reliability measurement, the complexity does not increase obviously, and simulation results show that the proposed scheme has the better performance under the quadrature amplitude modulation(QAM) modulation based on the Gray mapping.
文摘In this paper, the main objective is to identify the parameters of motors, which includes a brushless direct current (BLDC) motor and an induction motor. The motor systems are dynamically formulated by the mechanical and electrical equations. The real-coded genetic algorithm (RGA) is adopted to identify all parameters of motors, and the standard genetic algorithm (SRGA) and various adaptive genetic algorithm (ARGAs) are compared in the rotational angular speeds and fitness values, which are the inverse of square differences of angular speeds. From numerical simulations and experimental results, it is found that the SRGA and ARGA are feasible, the ARGA can effectively solve the problems with slow convergent speed and premature phenomenon, and is more accurate in identifying system’s parameters than the SRGA. From the comparisons of the ARGAs in identifying parameters of motors, the best ARGA method is obtained and could be applied to any other mechatronic systems.
基金supported in part by the National Natural Science Foundation of China (61640006, 61572188)the Natural Science Foundation of Shaanxi Province, China (2015JM6307, 2016JQ6011)the project of science and technology of Xi’an City (2017088CG/RC051(CADX002))
文摘In distributed cloud storage systems, inevitably there exist multiple node failures at the same time. The existing methods of regenerating codes, including minimum storage regenerating(MSR) codes and minimum bandwidth regenerating(MBR) codes, are mainly to repair one single or several failed nodes, unable to meet the repair need of distributed cloud storage systems. In this paper, we present locally minimum storage regenerating(LMSR) codes to recover multiple failed nodes at the same time. Specifically, the nodes in distributed cloud storage systems are divided into multiple local groups, and in each local group(4, 2) or(5, 3) MSR codes are constructed. Moreover, the grouping method of storage nodes and the repairing process of failed nodes in local groups are studied. Theoretical analysis shows that LMSR codes can achieve the same storage overhead as MSR codes. Furthermore, we verify by means of simulation that, compared with MSR codes, LMSR codes can reduce the repair bandwidth and disk I/O overhead effectively.
基金supported by the Program for Innovation Team Building at Institutions of Higher Education in Chongqing(No.J2013-46)the National Natural Science Foundation of China(Nos.61472464 and 61471075)+1 种基金the Natural Science Foundation of Chongqing Science and Technology Commission(Nos.cstc2015jcyj A0554 and cstc2013jcyj A40017)the Program for Postgraduate Science Research and Innovation of Chongqing University of Posts and Telecommunications(Chongqing Municipal Education Commission)(No.CYS14144)
文摘According to the requirements of the increasing development for optical transmission systems,a novel construction method of quasi-cyclic low-density parity-check(QC-LDPC) codes based on the subgroup of the finite field multiplicative group is proposed.Furthermore,this construction method can effectively avoid the girth-4 phenomena and has the advantages such as simpler construction,easier implementation,lower encoding/decoding complexity,better girth properties and more flexible adjustment for the code length and code rate.The simulation results show that the error correction performance of the QC-LDPC(3 780,3 540) code with the code rate of 93.7% constructed by this proposed method is excellent,its net coding gain is respectively 0.3dB,0.55dB,1.4dB and 1.98dB higher than those of the QC-LDPC(5 334,4 962) code constructed by the method based on the inverse element characteristics in the finite field multiplicative group,the SCG-LDPC(3 969,3 720) code constructed by the systematically constructed Gallager(SCG) random construction method,the LDPC(32 640,30 592) code in ITU-T G.975.1 and the classic RS(255,239) code which is widely used in optical transmission systems in ITU-T G.975 at the bit error rate(BER) of 10-7.Therefore,the constructed QC-LDPC(3 780,3 540) code is more suitable for optical transmission systems.
基金Supported by the Science and Technology on Avionics Integration Laboratory and National Aeronautical Science Foundation of China(20105552)
文摘An efficient LDPC-coded multi-relay cooperation architecture is proposed based on virtual vertical Bell Labs layered space-time （V-BLAST） processing for uplink communication, where minimum-mean-square-error （MMSE） and BP-based joint iterative decoding based on the introduced muhi-layer Tanner graph are effectively de- signed to detect and decode the corrupted received sequence at the destination. By introducing V-BLAST transmis- sion to the coded multi-relay cooperation, relays send their streams of symbols simultaneously, which increases the data rate and significantly reduces the transmission delay. The theoretical analysis and numerical results show that the new LDPC coded cooperation scheme outperforms the coded non-cooperation under the same code rate, and it also achieves a good trade-off among the performance, signal delay, and the encoding complexity associated with the number of relays. The performance gain can be credited to the proposed V-BLAST processing architecture and BP-based joint iterative decoding by the introduced multi-layer Tanner graph at a receiver-side.
文摘The improved three novel schemes of the super forward error correction （super-FEC） concatenated codes are proposed after the development trend of long-haul optical transmission systems and the defects of the existing FEC codes have been analyzed. The performance simulation of the Reed-Solomon（RS）＋ Bose-Chaudhuri-Hocguenghem（BCH） inner-outer serial concatenated code is implemented and the conceptions of encoding/decoding the parallel-concatenated code are presented. Furthermore, the simulation results for the RS（255,239） ＋RS（255,239） code and the RS（255,239） ＋RS（255,223） code show that the two consecutive concatenated codes are a superior coding scheme with such advantages as the better error correction, moderate redundancy and easy realization compared to the classic RS（255,239） code and other codes, and their signal to noise ratio gains are respectively 2-3 dB more than that of the RS（255,239）code at the bit error rate of 1 × 10^-13. Finally, the frame structure of the novel consecutive concatenated code is arranged to lay a firm foundation in designing its hardware.
文摘Digital Communications, in relation to wireless networks, have taken off in recent years due to the expanding need to communicate faster and more efficiently. A popular way to achieve this is by using wireless Multiple Input Multiple Output (MIMO) communication systems. MIMO systems utilize Space Time Block Codes (STBC) as one of the leading ways to obtain higher data rates with limited bandwidth and power. With several STBC methods currently available, this paper analyzes simulations using Orthogonal Space Time Block Codes (OSTBC) in Rayleigh fading channels to evaluate the performance of MIMO systems. The selection to use a Rayleigh fading channel as a model for a non-line-of-sight (nLOS) environment is selected to mimic installations where a large number of signal paths and reflections are expected. All simulations are coded, generated and plotted using MATLAB resulting in graphical data representing the bit-error rate (BER) to signal-to-noise ratio (Eb/N<sub>0</sub>) or SNR. Each simulation captures how different configurations of key variables including code rate, diversity and antenna count can impact system performance. Four modulation schemes (BPSK, QPSK, 16-QAM and 64-QAM) are included in each simulation. Conclusive evidence based upon these simulations suggests higher diversity gains were achieved with a greater number of antennas. The most significant factor for increasing system performance was using a lower count of transmit antennas with a higher count of receive antennas.
基金National High Technology Development Program(863) of China (2005AA123730) Natural Science Foundation of Chongqing University of Posts & Telecommunications(A2006 -53)
文摘A new concatenated code of RS（255,239）＋BCH（2 040,1 930） code to he suitable for WDM optical transmission systems is proposed. The simulation resuhs show that this new concatenated code. compared with the RS（255,239）4-CSOC（k0/n0=6/7, J= 8） code in ITU-TG. 75.1, has a lower redundancy and better error-correction performance, furthermore, its net coding gain（NCG） is respectively 0. 46 dB, 0.43 dB morethanthatofRS（255,239）＋CSOC（k0/n0= 6/7, J= 8） code and BCH（3860,3824）＋BCH （2 040,1 930） code in ITU TG. 75. 1 at the third iteration for the bit error rate（BER） of 10^-12. Therefore, the new super forward error correction（Super-FEC） concatenated code can be better used in ultra long-haul, ultra large-capacity and ultra high-speed WDM optical communication systems.
基金Supported by National Natural Science Foundation of China 60404022,60704009)National Outstanding Youth Foundation 60525303)Natural Science Foundation of Hebei Province(F2005000390,F2006000270)
文摘Ever-changing market conditions and a rapidly changing IT landscape call for fast and cheap ways to meet software demands. In order to tackle these problems, low-code development platforms (LCDPs) have emerged. These platforms are designed with the idea to limit recurring traditional hand-coding and programming. This article provides a theoretical overview of low-code solutions. The advantages and disadvantages of using LCDP in the creation of automated systems are considered. In conclusion, a conclusion is formulated about the prospects of using low-code technology.
文摘A new segmented correlating decoder of synchronous optical CDMA using modified prime sequence codes is proposed. The performance of the proposed system is analyzed under the assumption of Poisson shot noise model for the receiver photodetector. The decoder technique is shown to be more effective to improve the bit error probability performance than the method using an optical hard-limiter.
基金Sponsored by the National Natural Science Foundation of China(Grant No.61271423)
文摘By exploiting the structural features of L1C messages,a novel Early Termination( ET) strategy is proposed to speed up the decoding of low-density parity-check( LDPC) codes in the GPS system. The proposed strategy is based on the cyclic redundancy check( CRC) of the messages in the subframes 2 and 3. The simulation results show that average number of iterations of the proposed strategy is less than that of the standard ET strategy,with nearly no degradation in decoding performance. Besides,the proposed ET strategy can be efficiently implemented in a sequential or parallel manner. Thus,the proposed ET strategy is attractive for practical purposes.
文摘Although there are appropriate stipulations for the chattel guarantees in the law of China, this guarantee system could not adapt to the request of economy's development because of the following reasons: the scope of chattel guarantees is narrow according to relevant stipulations; the transaction cost of the chattel is high; mortgage registration of chattel is in a mess; lack of efficiently executive guarantee system, etc. To counter the problems existing in the present Chinese chattel guarantee system, in this article, the author proposed some corresponding suggestions and countermeasures, hoping to perfect the chattel guarantee system in China.
文摘Reliability of power systems is a key aspect in modern power system planning, design, and operation. The ascendance of the smart grid concept has provided high hopes of developing an intelligent network that is capable of being a self-healing grid, offering the ability to overcome the interruption problems that face the utility and cost it tens of millions in repair and loss. In this work, we develop a MATLAB code to examine the effect of the smart grid applications in improving the reliability of the power distribution networks via Monte Carlo Simulation approach. The system used in this paper is the IEEE 34 test feeder. The objective is to measure the installations of the Automatic Reclosers (ARs) as well as the Distributed Generators (DGs) on the reliability indices, SAIDI, SAIFI, CAIDI and EUE, and make comparisons with results from a previous study done by the authors using another approach. The MATLAB code should provide close results to the output of the previous research to verify its effectiveness.
文摘The paper presents a computer code system 'SRDAAR- QNPP' for the real-time dose as-sessment of an accident release for Qinshan Nuclear Power Plant. It includes three parts:thereal-time data acquisition system, assessment computer. and the assessment operating code system. InSRDAAR-QNPP, the wind field of the surface and the lower levels are determined hourly by using amass consistent three-dimension diasnosis model with the topographic following coordinate system.A Lagrangin Puff model under changing meteorological condition is adopted for atmosphericdispersion, the correction for dry and wet depositions. physical decay and partial plume penetrationof the top inversion and the deviation of plume axis caused by complex terrain have been taken in-to account. The calculation domain areas include three square grid areas with the sideline 10 km, 40krn and 160 km and a grid interval 0.5 km, 2.0 km, 8.0 km respectively. Three exposure pathwaysare taken into account:the external exposure from immersion cloud and passing puff, the internalexposure from inhalation and the external exposure from contaminated ground. This system is ableto provide the results of concentration and dose distributions within 10 minutes after the data havebeen inputed.
文摘Power control is an important technique in WCDMA mobile systems for both increasing system capacity and guaranteeing the required QoS (time delay and wireless link transmission quality) of multimedia services. The optimum power control for narrow band CDMA cellular systems is a problem of single threshold optimization. Because these systems have only one type of traffic and have the same QoS requirement. However, WCDMA mobile system should provide multimedia services and different types of traffic have different QoS requirements. Thus, the power control in WCDMA mobile systems isn't a problem of single threshold optimizing, but turns into the optimizing problem of multi-threshold. We analyze the power control problem in WCDMA cellular mobile systems and propose the optimum transmitter power control algorithm. Three criteria to optimize transmitter power levels of multi-thresholds based on grading the priority orders of multimedia services are proposed. Simulation results show that the proposed algorithms are more effective than conventional algorithms and can provide better performance for WCDMA cellular mobile systems.
