We reversely analyzed the energy management strategy （EMS） for a single-shaft parallel hybrid electric vehicle （HEV）, and build a forward co-simulation platform based on Cruise and Matlab. The vehicle dynamics mod...We reversely analyzed the energy management strategy （EMS） for a single-shaft parallel hybrid electric vehicle （HEV）, and build a forward co-simulation platform based on Cruise and Matlab. The vehicle dynamics model is built with Cruise, and control model is set up with Matlab/Simulink environment. The data between the two models are transferred by the Matlab API interface in Cruise. After mechanical and signal connections are completed, we establish the computing tasks and take the simulations of vehicle＇ s power performance, economy, and emission performance. The simulation results match the actual measurement results, which show that the co-simulation platform is correct and feasible. The platform can be used not only for a basic simulation platform to optimize further EMS, but also for the development of actual control system.展开更多
The interaction between the airflow and train influences the aerodynamic characteristics and dynamic performance of high-speed trains.This study focused on the fluid-solid coupling effect of airflow and HST,and propos...The interaction between the airflow and train influences the aerodynamic characteristics and dynamic performance of high-speed trains.This study focused on the fluid-solid coupling effect of airflow and HST,and proposed a co-simulation(CS)approach between computational fluid dynamics and multi-body dynamics.Firstly,the aerodynamic model was developed by employing overset mesh technology and the finite volume method,and the detailed train-track coupled dynamic model was established.Then the User Data Protocol was adopted to build data communication channels.Moreover,the proposed CS method was validated by comparison with a reported field test result.Finally,a case study of the HST exiting a tunnel subjected to crosswind was conducted to compare differences between CS and offline simulation(OS)methods.In terms of the presented case,the changing trends of aerodynamic forces and car-body displacements calculated by the two methods were similar.Differences mainly lie in aerodynamic moments and transient wheel-rail impacts.Maximum pitching and yawing moments on the head vehicle in the two methods differ by 21.1 kN∙m and 29.6 kN∙m,respectively.And wheel-rail impacts caused by sudden changes in aerodynamic loads are significantly severer in CS.Wheel-rail safety indices obtained by CS are slightly greater than those by OS.This research proposes a CS method for aerodynamic characteristics and dynamic performance of the HST in complex scenarios,which has superiority in computational efficiency and stability.展开更多
With the transformation from websites to Internet platforms, Chinese young netizens (born in 1990-2005) have become key subjects in the evolution of cyber-nationalism. Based on survey data, this study classifies their...With the transformation from websites to Internet platforms, Chinese young netizens (born in 1990-2005) have become key subjects in the evolution of cyber-nationalism. Based on survey data, this study classifies their nationalism into four types and explores its transformation alongside globalization cognition. The result shows that moderate nationalism is the mainstream. This has raised their attention to globalization, with greater focus on relations between China and developing countries, and nations along the Belt and Road Initiative. Their personal experiences and cultural exposure foster a more inclusive global vision, shaping the evolution of nationalism and global dialogue.展开更多
The integration of High-Altitude Platform Stations(HAPS)with Reconfigurable Intelligent Surfaces(RIS)represents a critical advancement for next-generation wireless networks,offering unprecedented opportunities for ubi...The integration of High-Altitude Platform Stations(HAPS)with Reconfigurable Intelligent Surfaces(RIS)represents a critical advancement for next-generation wireless networks,offering unprecedented opportunities for ubiquitous connectivity.However,existing research reveals significant gaps in dynamic resource allocation,joint optimization,and equitable service provisioning under varying channel conditions,limiting practical deployment of these technologies.This paper addresses these challenges by proposing a novel Fairness-Aware Deep Q-Learning(FAIRDQL)framework for joint resource management and phase configuration in HAPS-RIS systems.Our methodology employs a comprehensive three-tier algorithmic architecture integrating adaptive power control,priority-based user scheduling,and dynamic learning mechanisms.The FAIR-DQL approach utilizes advanced reinforcement learning with experience replay and fairness-aware reward functions to balance competing objectives while adapting to dynamic environments.Key findings demonstrate substantial improvements:9.15 dB SINR gain,12.5 bps/Hz capacity,78%power efficiency,and 0.82 fairness index.The framework achieves rapid 40-episode convergence with consistent delay performance.These contributions establish new benchmarks for fairness-aware resource allocation in aerial communications,enabling practical HAPS-RIS deployments in rural connectivity,emergency communications,and urban networks.展开更多
We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by&quo...We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,College of Materials Science and Engineering,Donghua University,Shanghai 201620,China".We apologized for the inconvenience caused by this error.展开更多
At a critical juncture of global industrial transformation and economic recovery,the 2026 China Expo Forum for International Cooperation(CEFCO)recently concluded in Wuhan.Dubbed the“Davos of the exhibition industry”...At a critical juncture of global industrial transformation and economic recovery,the 2026 China Expo Forum for International Cooperation(CEFCO)recently concluded in Wuhan.Dubbed the“Davos of the exhibition industry”,the forum,attracted more than 600 exhibition professionals from over 20 countries and regions.展开更多
A kind of construction truck model is built in Adams based on multi-body dynamic theory. The rigid and elastic wheels of tire-soil contact models are proposed based on the Bekker pressure model and the Jonasi shear so...A kind of construction truck model is built in Adams based on multi-body dynamic theory. The rigid and elastic wheels of tire-soil contact models are proposed based on the Bekker pressure model and the Jonasi shear soil model, and they are described in the form of S-function to enhance the calculation efficiency and simulation accuracy. Finally, the interaction of truck and soil is simulated by Adams-Maflab co-simulation to study the influence of soft terrain on the ride comfort of vehicles. The co-simulation results reveal that the terrain properties have a great influence on the ride comfort of vehicles as well as driving speed, road roughness and cargo weight. This co-simulation model is convenient for adding the factor of terrain deformation to the analysis of vehicle ride comfort. It can also be used to optimize suspension system parameters especially for off-road vehicles.展开更多
In order to design an effective hydraulic motor speed control system, Matlab_Simiulink and AMESim co-simulation technology is adopted to establish more accurate model and reflect the actual system. The neural...In order to design an effective hydraulic motor speed control system, Matlab_Simiulink and AMESim co-simulation technology is adopted to establish more accurate model and reflect the actual system. The neural network proportion-integration-differentiation （PID） control parameters on-line adjustment is utilized to improve system accuracy, celerity and stability. Simulation results indicate that with the control system proposed in this paper, the system deviation is reduced, therefore accuracy is improved; response speed for step signal and sinusoidal signal gets faster, thus acceleration is rapidly improved; and the system can be restored to the control value in case of interfering, so stability is improved.展开更多
Under high-level earthquakes,bridge piers and bearings are prone to be damaged and the elastoplastic state of bridge structural components is easily accessible in the train-track-bridge interaction(TTBI)system.Conside...Under high-level earthquakes,bridge piers and bearings are prone to be damaged and the elastoplastic state of bridge structural components is easily accessible in the train-track-bridge interaction(TTBI)system.Considering the complexity and structural non-linearity of the TTBI system under earthquakes,a single software is not adequate for the coupling analysis.Therefore,in this paper,an interactive method for the TTBI system is proposed by combining the multi-body dynamics software Simpack and the seismic simulation software OpenSees based on the Client-Server architecture,which takes full advantages of the powerful wheel-track contact analysis capabilities of Simpack and the sophisticated nonlinear analysis capabilities of OpenSees.Based on the proposed Simpack and OpenSees co-simulating train-track-bridge(SOTTB)method,a single-span bridge analysis under the earthquake was conducted and the accuracy of co-simulation method was verified by comparing it with results of the finite element model.Finally,the TTBI model is built utilizing the SOTTB method to further discuss the running safety of HST on multi-span simply supported bridges under earthquakes.The results show that the SOTTB method has the advantages of usability,high versatility and accuracy which can be further used to study the running safety of HST under earthquakes with high intensities.展开更多
In order to observe the change and fluctuation in flow and pressure of a hydraulic quadruped robot＇s hydraulic system when the robot walks on trot gait,a co-simulation method based on ADAMS and AMESim is proposed. Fi...In order to observe the change and fluctuation in flow and pressure of a hydraulic quadruped robot＇s hydraulic system when the robot walks on trot gait,a co-simulation method based on ADAMS and AMESim is proposed. Firstly,the change rule in each swing angle of the hydraulic quadruped robot＇s four legs is analyzed and converted to the displacement change of the hydraulic cylinder by calculating their geometric relationship.Secondly,the robot＇s dynamic model is built in ADAMS and its hydraulic and control system models are built in AMESim. The displacement change of the hydraulic cylinder in the hydraulic system is used as the driving function of the dynamics model in ADAMS,and the driving force of the dynamics model is used as the loads of the hydraulic system in AMESim. By introducing the PID closed-loop control in the control system,the co-simulation between hydraulic system and mechanical system is implemented. Finally,the curve of hydraulic cylinders＇ loads,flow and pressure are analyzed and the results show that they fluctuate highly in accordance with the real situation. The study provides data support for the development of a hydraulic quadruped robot＇s physical prototype.展开更多
To study the durability of a passenger car, this work investigates numerical simulation techniques. The investigations are based on an explicit implicit approach in which substructure techniques are used to reduce the...To study the durability of a passenger car, this work investigates numerical simulation techniques. The investigations are based on an explicit implicit approach in which substructure techniques are used to reduce the simulation time, allowing full vehicle dynamic analyses to be performed on a timescale that is dif cult or impossible with the conventional nite element model (FEM). The model used here includes all necessary nonlinearities in order to maintain accuracy. All key components of the car structure are modeled with deformable materials. Tire road interactions are modeled in the explicit package with contact-impact interfaces with arbitrary frictional and geometric properties. Key parameters of the responses of the car driven on six different kinds of test road surfaces are examined and compared with experimental values. It can be concluded that the explicit implicit co-simulation techniques used here are ef cient and accurate enough for engineering purposes. This paper also discusses the limitations of the proposed method and outlines possible improvements for future work.展开更多
Various distributed cooperative control schemes have been widely utilized for cyber-physical power system(CPPS),which only require local communications among geographic neighbors to fulfill certain goals.However,the p...Various distributed cooperative control schemes have been widely utilized for cyber-physical power system(CPPS),which only require local communications among geographic neighbors to fulfill certain goals.However,the process of evaluating the performance of an algorithm for a CPPS can be affected by the physical target characteristics and real communication conditions.To address this potential problem,a testbed with controller hardware-in-the-loop(CHIL)is proposed in this paper.On the basis of a power grid simulation conducted using the real-time simulator RT-LAB developed by the company OPAL-RT,along with a communication network simulation developed with OPNET,multiple distributed controllers were developed with hardware devices to directly collect the real-time operating data of the power system model in RT-LAB and provide local control.Furthermore,the communication between neighboring controllers was realized using the cyber system modelin OPNET with an Ethernet interface.The hardware controllers produced a real-world control behavior instead of a digital simulation,and precisely simulated the dynamic features of a CPPS with high speed.A classic cooperative control case for active power output was studied to explain the integrated simulation process and validate the effectiveness of the co-simulation testbed.展开更多
Based on the characteristics of integrated virtual prototype technology, the mechanical system sub-model, the hydraulic system sub-model and the control system sub-model of a forging manipula- tor system have been bui...Based on the characteristics of integrated virtual prototype technology, the mechanical system sub-model, the hydraulic system sub-model and the control system sub-model of a forging manipula- tor system have been built using a variety of software, and a forging manipulator mtrltidisciplinary co- simulation model has been also built using a method of simulation models interface. Then the simu- lation and experiment are finished, and the result of the experiment is in good agreement with the re- sult of the simulation. It shows that the co-simulation model established can simulate accurately pa- rameter changes in real time during the moving of the forging manipulator such as displacement, ve- locity and pressure flow, which is of important significance for the optimized design of the forging manipulator system to establish the models.展开更多
The virtual prototyping models of the mechanical, hydraulic and control system of the ITER tractor were built with CATIA, ADAMS and MATLAB/Simulink respectively according to its heavy load and high precision character...The virtual prototyping models of the mechanical, hydraulic and control system of the ITER tractor were built with CATIA, ADAMS and MATLAB/Simulink respectively according to its heavy load and high precision characteristics, and the data transfer between the different models was accomplished by the integration interface between different software. Consequently the virtual experimental platform for the multi-disciplinary co-simulation was established. A co-simulation study of the mechanical-hydraulic-control coupling system of the ITER tractor was carried out. The synchronization servo control of parallel hydraulic cylinders was implemented, and the tracking control of the preconcerted trajectory of the hydraulic cylinders was realized on the established experimental platform. This paper presents the optimization design and technology rebuilding for the complicated coupling system with its theoretic foundation and co-simulation virtual experimental platform.展开更多
The 3D model of flapping wing mechanism and veins is constructed in 3D computer aided design (CAD) software UG.Then the co-simulation model is established by using multibody dynamics software ADAMS and MATLAB.The vali...The 3D model of flapping wing mechanism and veins is constructed in 3D computer aided design (CAD) software UG.Then the co-simulation model is established by using multibody dynamics software ADAMS and MATLAB.The validation of this co-simulation model is verified by comparing the simulation results with final experiments.The simulation results and experiments reveal that the relation between flapping frequency and driving voltage of motor is approximately linear under various wingspans.The variance of flapping frequency among different wingspans augments gradually with increasing voltage.Furthermore,the simulation results suggest that flapping frequency is sensitive to wingspan and decreases with increasing wingspan of veins,and the relation between flapping frequency and moment of inertia of veins is also approximately linear for various voltages.展开更多
A virtual thermal test system was built through the co-simulation using Simulink and Comsol to realize the complete virtualization of the thermal test.Using the co-simulation technology,comprehensive simulation analys...A virtual thermal test system was built through the co-simulation using Simulink and Comsol to realize the complete virtualization of the thermal test.Using the co-simulation technology,comprehensive simulation analysis of the control system,electric field and thermal field was realized.The data state of each observation point could be directly observed at one time,including the output state information of the power amplifier,the output state information of the heater,and the thermal state information of the test unit.The virtual thermal test system has a predictive and guiding role for engineering thermal tests,and can realize thermal environment simulation beyond the existing thermal environment ground simulation capabilities,providing a basis for the development of future models.展开更多
A method, which compares the angular acceleration and vibration spectrums of shafts and gears with physical characteristics of gearbox as tooth numbers and speed ratios, is proposed to find the source of gear rattle v...A method, which compares the angular acceleration and vibration spectrums of shafts and gears with physical characteristics of gearbox as tooth numbers and speed ratios, is proposed to find the source of gear rattle vibration. A mathematical and multi-body dynamics co-simulation model is built to reproduce the gear rattle phenomenon of one typical type of manual transmission. In the model, multi-body dynamics part is used for rotational motion and engagement simulation of gearbox shafts and gears, while mathematical part for control and data processing. The simulation results show that the sound source of the gear rattle from the first gear to the third gear is similar to the experimental results;different parameters like rotating damping, contact stiffness,contact damping, inertia moment and torque fluctuation making effects on gear rattle vibration strength are researched and simulated. The comparison of the simulation and experimental results shows that this method can provide recommendations for solving practical gear rattle problems.展开更多
A hardware-software co-simulation method for system on chip (SOC) design is discussed. It is based on an instruction set simulator (ISS) and an event-driven hardware simulator, and a bus interface model that is descri...A hardware-software co-simulation method for system on chip (SOC) design is discussed. It is based on an instruction set simulator (ISS) and an event-driven hardware simulator, and a bus interface model that is described in C language provides the interface between the two. The bus interface model and the ISS are linked into a singleton program--the software simulator, which communicate with the hardware simulator through Windows sockets. The implementation of the bus interface model and the synchronization between hardware and software simulator are discussed in detail. Co-simulation control of the hardware simulator is also discussed.展开更多
Research on a servo tracking system mounted with a small arm for robot fighting platform based on multi-body system dynamics and intelligent control theory is presented.A multi-body dynamic model which can accurately ...Research on a servo tracking system mounted with a small arm for robot fighting platform based on multi-body system dynamics and intelligent control theory is presented.A multi-body dynamic model which can accurately express dynamic performances of the system is built in ADAMS.In addition,an intelligent PID control model is built with MATLAB/Simulink,and the two models are integrated and co-simulated by the interface of ADAMS/Controls.Simulation experiments indicate that co-simulation technique used for design of the servo tracking system mounted with a small arm can effectively improve its design efficiency,and can also provide theoretical bases for the motion control and performance improvement of the servo tracking system mounted with a small arm.展开更多
In order to analyze the energy consumption of wheel loader during working process, a three-dimensional（3D） model of wheel loader is established by Pro/E software, and it is imported into the software SimulationX tob...In order to analyze the energy consumption of wheel loader during working process, a three-dimensional（3D） model of wheel loader is established by Pro/E software, and it is imported into the software SimulationX tobuild the kinetic model of the whole wheel loader. Meanwhile, the simulation model of hydraulic system is builtby the same software. By integrating the simulation model of hydraulic system with the kinetic model, the co-sim-ulation model of wheel loader could be achieved. The precision of co-simulation model of the working device isverified through the comparison between simulation results and test results. The testing results show that, undernegative loading condition, the energy loss in multi-way valve accounts for about 52%. The important energy lossin loader＇s working hydraulic system using constant displacement pump is the large throttling loss of multi-wayvalves. This study provides a reference for designing of a more energy-efficient hydaulic system of wheel loader.展开更多
基金Supported by the National High Technology Research and Development Program of China("863"Program),(2011AAllA252)
文摘We reversely analyzed the energy management strategy （EMS） for a single-shaft parallel hybrid electric vehicle （HEV）, and build a forward co-simulation platform based on Cruise and Matlab. The vehicle dynamics model is built with Cruise, and control model is set up with Matlab/Simulink environment. The data between the two models are transferred by the Matlab API interface in Cruise. After mechanical and signal connections are completed, we establish the computing tasks and take the simulations of vehicle＇ s power performance, economy, and emission performance. The simulation results match the actual measurement results, which show that the co-simulation platform is correct and feasible. The platform can be used not only for a basic simulation platform to optimize further EMS, but also for the development of actual control system.
基金Supported by the Sichuan Science and Technology Program(Grant No.2023ZDZX0008)the National Natural Science Foundation of China(Grant No.52388102)the New Cornerstone Science Foundation through the XPLORER PRIZE.
文摘The interaction between the airflow and train influences the aerodynamic characteristics and dynamic performance of high-speed trains.This study focused on the fluid-solid coupling effect of airflow and HST,and proposed a co-simulation(CS)approach between computational fluid dynamics and multi-body dynamics.Firstly,the aerodynamic model was developed by employing overset mesh technology and the finite volume method,and the detailed train-track coupled dynamic model was established.Then the User Data Protocol was adopted to build data communication channels.Moreover,the proposed CS method was validated by comparison with a reported field test result.Finally,a case study of the HST exiting a tunnel subjected to crosswind was conducted to compare differences between CS and offline simulation(OS)methods.In terms of the presented case,the changing trends of aerodynamic forces and car-body displacements calculated by the two methods were similar.Differences mainly lie in aerodynamic moments and transient wheel-rail impacts.Maximum pitching and yawing moments on the head vehicle in the two methods differ by 21.1 kN∙m and 29.6 kN∙m,respectively.And wheel-rail impacts caused by sudden changes in aerodynamic loads are significantly severer in CS.Wheel-rail safety indices obtained by CS are slightly greater than those by OS.This research proposes a CS method for aerodynamic characteristics and dynamic performance of the HST in complex scenarios,which has superiority in computational efficiency and stability.
文摘With the transformation from websites to Internet platforms, Chinese young netizens (born in 1990-2005) have become key subjects in the evolution of cyber-nationalism. Based on survey data, this study classifies their nationalism into four types and explores its transformation alongside globalization cognition. The result shows that moderate nationalism is the mainstream. This has raised their attention to globalization, with greater focus on relations between China and developing countries, and nations along the Belt and Road Initiative. Their personal experiences and cultural exposure foster a more inclusive global vision, shaping the evolution of nationalism and global dialogue.
基金supported by the Princess Nourah bint Abdulrahman University Researchers Supporting Project,number PNURSP2025R757Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘The integration of High-Altitude Platform Stations(HAPS)with Reconfigurable Intelligent Surfaces(RIS)represents a critical advancement for next-generation wireless networks,offering unprecedented opportunities for ubiquitous connectivity.However,existing research reveals significant gaps in dynamic resource allocation,joint optimization,and equitable service provisioning under varying channel conditions,limiting practical deployment of these technologies.This paper addresses these challenges by proposing a novel Fairness-Aware Deep Q-Learning(FAIRDQL)framework for joint resource management and phase configuration in HAPS-RIS systems.Our methodology employs a comprehensive three-tier algorithmic architecture integrating adaptive power control,priority-based user scheduling,and dynamic learning mechanisms.The FAIR-DQL approach utilizes advanced reinforcement learning with experience replay and fairness-aware reward functions to balance competing objectives while adapting to dynamic environments.Key findings demonstrate substantial improvements:9.15 dB SINR gain,12.5 bps/Hz capacity,78%power efficiency,and 0.82 fairness index.The framework achieves rapid 40-episode convergence with consistent delay performance.These contributions establish new benchmarks for fairness-aware resource allocation in aerial communications,enabling practical HAPS-RIS deployments in rural connectivity,emergency communications,and urban networks.
文摘We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,College of Materials Science and Engineering,Donghua University,Shanghai 201620,China".We apologized for the inconvenience caused by this error.
文摘At a critical juncture of global industrial transformation and economic recovery,the 2026 China Expo Forum for International Cooperation(CEFCO)recently concluded in Wuhan.Dubbed the“Davos of the exhibition industry”,the forum,attracted more than 600 exhibition professionals from over 20 countries and regions.
基金The National Natural Science Foundation of China(No.50575040)the Natural Science Foundation of Jiangsu Province(No.BK2007112)
文摘A kind of construction truck model is built in Adams based on multi-body dynamic theory. The rigid and elastic wheels of tire-soil contact models are proposed based on the Bekker pressure model and the Jonasi shear soil model, and they are described in the form of S-function to enhance the calculation efficiency and simulation accuracy. Finally, the interaction of truck and soil is simulated by Adams-Maflab co-simulation to study the influence of soft terrain on the ride comfort of vehicles. The co-simulation results reveal that the terrain properties have a great influence on the ride comfort of vehicles as well as driving speed, road roughness and cargo weight. This co-simulation model is convenient for adding the factor of terrain deformation to the analysis of vehicle ride comfort. It can also be used to optimize suspension system parameters especially for off-road vehicles.
文摘In order to design an effective hydraulic motor speed control system, Matlab_Simiulink and AMESim co-simulation technology is adopted to establish more accurate model and reflect the actual system. The neural network proportion-integration-differentiation （PID） control parameters on-line adjustment is utilized to improve system accuracy, celerity and stability. Simulation results indicate that with the control system proposed in this paper, the system deviation is reduced, therefore accuracy is improved; response speed for step signal and sinusoidal signal gets faster, thus acceleration is rapidly improved; and the system can be restored to the control value in case of interfering, so stability is improved.
基金Project(2020EEEVL0403)supported by the China Earthquake AdministrationProjects(51878674,52022113)supported by the National Natural Science Foundation of ChinaProject(2022ZZTS0670)supported by the Fundamental Research Funds for the Central Universities,China。
文摘Under high-level earthquakes,bridge piers and bearings are prone to be damaged and the elastoplastic state of bridge structural components is easily accessible in the train-track-bridge interaction(TTBI)system.Considering the complexity and structural non-linearity of the TTBI system under earthquakes,a single software is not adequate for the coupling analysis.Therefore,in this paper,an interactive method for the TTBI system is proposed by combining the multi-body dynamics software Simpack and the seismic simulation software OpenSees based on the Client-Server architecture,which takes full advantages of the powerful wheel-track contact analysis capabilities of Simpack and the sophisticated nonlinear analysis capabilities of OpenSees.Based on the proposed Simpack and OpenSees co-simulating train-track-bridge(SOTTB)method,a single-span bridge analysis under the earthquake was conducted and the accuracy of co-simulation method was verified by comparing it with results of the finite element model.Finally,the TTBI model is built utilizing the SOTTB method to further discuss the running safety of HST on multi-span simply supported bridges under earthquakes.The results show that the SOTTB method has the advantages of usability,high versatility and accuracy which can be further used to study the running safety of HST under earthquakes with high intensities.
文摘In order to observe the change and fluctuation in flow and pressure of a hydraulic quadruped robot＇s hydraulic system when the robot walks on trot gait,a co-simulation method based on ADAMS and AMESim is proposed. Firstly,the change rule in each swing angle of the hydraulic quadruped robot＇s four legs is analyzed and converted to the displacement change of the hydraulic cylinder by calculating their geometric relationship.Secondly,the robot＇s dynamic model is built in ADAMS and its hydraulic and control system models are built in AMESim. The displacement change of the hydraulic cylinder in the hydraulic system is used as the driving function of the dynamics model in ADAMS,and the driving force of the dynamics model is used as the loads of the hydraulic system in AMESim. By introducing the PID closed-loop control in the control system,the co-simulation between hydraulic system and mechanical system is implemented. Finally,the curve of hydraulic cylinders＇ loads,flow and pressure are analyzed and the results show that they fluctuate highly in accordance with the real situation. The study provides data support for the development of a hydraulic quadruped robot＇s physical prototype.
文摘To study the durability of a passenger car, this work investigates numerical simulation techniques. The investigations are based on an explicit implicit approach in which substructure techniques are used to reduce the simulation time, allowing full vehicle dynamic analyses to be performed on a timescale that is dif cult or impossible with the conventional nite element model (FEM). The model used here includes all necessary nonlinearities in order to maintain accuracy. All key components of the car structure are modeled with deformable materials. Tire road interactions are modeled in the explicit package with contact-impact interfaces with arbitrary frictional and geometric properties. Key parameters of the responses of the car driven on six different kinds of test road surfaces are examined and compared with experimental values. It can be concluded that the explicit implicit co-simulation techniques used here are ef cient and accurate enough for engineering purposes. This paper also discusses the limitations of the proposed method and outlines possible improvements for future work.
基金the National Key Research and Development Program of China(Basic Research Class)(No.2017YFB0903000)the National Natural Science Foundation of China(No.U1909201).
文摘Various distributed cooperative control schemes have been widely utilized for cyber-physical power system(CPPS),which only require local communications among geographic neighbors to fulfill certain goals.However,the process of evaluating the performance of an algorithm for a CPPS can be affected by the physical target characteristics and real communication conditions.To address this potential problem,a testbed with controller hardware-in-the-loop(CHIL)is proposed in this paper.On the basis of a power grid simulation conducted using the real-time simulator RT-LAB developed by the company OPAL-RT,along with a communication network simulation developed with OPNET,multiple distributed controllers were developed with hardware devices to directly collect the real-time operating data of the power system model in RT-LAB and provide local control.Furthermore,the communication between neighboring controllers was realized using the cyber system modelin OPNET with an Ethernet interface.The hardware controllers produced a real-world control behavior instead of a digital simulation,and precisely simulated the dynamic features of a CPPS with high speed.A classic cooperative control case for active power output was studied to explain the integrated simulation process and validate the effectiveness of the co-simulation testbed.
基金Supported by the National Natural Science Foundation of China(No.51575471)Collaborative Innovation Program Topics of Heavy Machinery of Yanshan University(2011 Program,No.ZX01-20140400-01)
文摘Based on the characteristics of integrated virtual prototype technology, the mechanical system sub-model, the hydraulic system sub-model and the control system sub-model of a forging manipula- tor system have been built using a variety of software, and a forging manipulator mtrltidisciplinary co- simulation model has been also built using a method of simulation models interface. Then the simu- lation and experiment are finished, and the result of the experiment is in good agreement with the re- sult of the simulation. It shows that the co-simulation model established can simulate accurately pa- rameter changes in real time during the moving of the forging manipulator such as displacement, ve- locity and pressure flow, which is of important significance for the optimized design of the forging manipulator system to establish the models.
基金supported by design of the ITER transfer casks system (ITER International Team) ITA 23-01-CNthe Key Laboratory of Biomimetic Sensing and Advanced Robot Technology,Anhui Province,China
文摘The virtual prototyping models of the mechanical, hydraulic and control system of the ITER tractor were built with CATIA, ADAMS and MATLAB/Simulink respectively according to its heavy load and high precision characteristics, and the data transfer between the different models was accomplished by the integration interface between different software. Consequently the virtual experimental platform for the multi-disciplinary co-simulation was established. A co-simulation study of the mechanical-hydraulic-control coupling system of the ITER tractor was carried out. The synchronization servo control of parallel hydraulic cylinders was implemented, and the tracking control of the preconcerted trajectory of the hydraulic cylinders was realized on the established experimental platform. This paper presents the optimization design and technology rebuilding for the complicated coupling system with its theoretic foundation and co-simulation virtual experimental platform.
基金the National Natural Science Foundationof China(No.60375033)
文摘The 3D model of flapping wing mechanism and veins is constructed in 3D computer aided design (CAD) software UG.Then the co-simulation model is established by using multibody dynamics software ADAMS and MATLAB.The validation of this co-simulation model is verified by comparing the simulation results with final experiments.The simulation results and experiments reveal that the relation between flapping frequency and driving voltage of motor is approximately linear under various wingspans.The variance of flapping frequency among different wingspans augments gradually with increasing voltage.Furthermore,the simulation results suggest that flapping frequency is sensitive to wingspan and decreases with increasing wingspan of veins,and the relation between flapping frequency and moment of inertia of veins is also approximately linear for various voltages.
文摘A virtual thermal test system was built through the co-simulation using Simulink and Comsol to realize the complete virtualization of the thermal test.Using the co-simulation technology,comprehensive simulation analysis of the control system,electric field and thermal field was realized.The data state of each observation point could be directly observed at one time,including the output state information of the power amplifier,the output state information of the heater,and the thermal state information of the test unit.The virtual thermal test system has a predictive and guiding role for engineering thermal tests,and can realize thermal environment simulation beyond the existing thermal environment ground simulation capabilities,providing a basis for the development of future models.
文摘A method, which compares the angular acceleration and vibration spectrums of shafts and gears with physical characteristics of gearbox as tooth numbers and speed ratios, is proposed to find the source of gear rattle vibration. A mathematical and multi-body dynamics co-simulation model is built to reproduce the gear rattle phenomenon of one typical type of manual transmission. In the model, multi-body dynamics part is used for rotational motion and engagement simulation of gearbox shafts and gears, while mathematical part for control and data processing. The simulation results show that the sound source of the gear rattle from the first gear to the third gear is similar to the experimental results;different parameters like rotating damping, contact stiffness,contact damping, inertia moment and torque fluctuation making effects on gear rattle vibration strength are researched and simulated. The comparison of the simulation and experimental results shows that this method can provide recommendations for solving practical gear rattle problems.
文摘A hardware-software co-simulation method for system on chip (SOC) design is discussed. It is based on an instruction set simulator (ISS) and an event-driven hardware simulator, and a bus interface model that is described in C language provides the interface between the two. The bus interface model and the ISS are linked into a singleton program--the software simulator, which communicate with the hardware simulator through Windows sockets. The implementation of the bus interface model and the synchronization between hardware and software simulator are discussed in detail. Co-simulation control of the hardware simulator is also discussed.
基金Sponsored by the Independent Research Foundation of State Key Laboratory(ZDKT08-05)the Ministerial Level Research Foundation(06104040)
文摘Research on a servo tracking system mounted with a small arm for robot fighting platform based on multi-body system dynamics and intelligent control theory is presented.A multi-body dynamic model which can accurately express dynamic performances of the system is built in ADAMS.In addition,an intelligent PID control model is built with MATLAB/Simulink,and the two models are integrated and co-simulated by the interface of ADAMS/Controls.Simulation experiments indicate that co-simulation technique used for design of the servo tracking system mounted with a small arm can effectively improve its design efficiency,and can also provide theoretical bases for the motion control and performance improvement of the servo tracking system mounted with a small arm.
文摘In order to analyze the energy consumption of wheel loader during working process, a three-dimensional（3D） model of wheel loader is established by Pro/E software, and it is imported into the software SimulationX tobuild the kinetic model of the whole wheel loader. Meanwhile, the simulation model of hydraulic system is builtby the same software. By integrating the simulation model of hydraulic system with the kinetic model, the co-sim-ulation model of wheel loader could be achieved. The precision of co-simulation model of the working device isverified through the comparison between simulation results and test results. The testing results show that, undernegative loading condition, the energy loss in multi-way valve accounts for about 52%. The important energy lossin loader＇s working hydraulic system using constant displacement pump is the large throttling loss of multi-wayvalves. This study provides a reference for designing of a more energy-efficient hydaulic system of wheel loader.
