The determination method of catechol by fluorescence quenching was developed.The assay was based on the combination of the unique property of gold nanoparticles with tyrosinase enzymatic reaction.In the presence of ty...The determination method of catechol by fluorescence quenching was developed.The assay was based on the combination of the unique property of gold nanoparticles with tyrosinase enzymatic reaction.In the presence of tyrosinase,the fluorescence of gold nanoparticles was quenched by catechol which can be employed to detect catechol.Under the optimal conditions,a linear range 5.0×10^(-7)-1.0×10^(-3) mol L^(-1) and a detection limit 1.0×10^(-7) mol L^(-1) of catechol were obtained.o-Quinone intermediate produced...展开更多
In this study, extractive distillation has been applied to separate catechol （CAT） from carbofuran phenol （CFP） with high purity and yield. The relative volatility of CFP to CAT was measured, and the choice of sep...In this study, extractive distillation has been applied to separate catechol （CAT） from carbofuran phenol （CFP） with high purity and yield. The relative volatility of CFP to CAT was measured, and the choice of separating agents was investigated. The experimental results indicated that CFP/CAT is an azeotropic system with an azeotropic point at 93.40℃/0.400 kPa and an azeotropic mixture containing 49.96% of CFP and 50.04% of CAT. Data from the determination of the relative volatility have shown that separating agents such as diglycol and 4-butylcatechol （4-TBC） are able to increase the relative volatility up to 1.90. In one shot process batch extractive distillation of CFP mixture with 3% （by mass） diglycol as separating agent, the purity and yield of the obtained CFP was 99.0% and 95.0%, respectively, while the distillation without separating agent provided a purity and yield of only 98.0% and 90.0%, respectively, There was no residual separating agent found in the product.展开更多
It is of great significance to design epoxy coatings with superior antibacterial properties and high adhesive properties, as well as excellent processing, superior durability, and high transparency. However, it is sti...It is of great significance to design epoxy coatings with superior antibacterial properties and high adhesive properties, as well as excellent processing, superior durability, and high transparency. However, it is still a challenge because of the common complex design and synthesis. Herein, the bio-based monomer protocatechuic acid(PCA) was used as raw material, the catechol structure with high bonding and antibacterial properties was introduced into the flexible alkane segment of ethylene glycol diglycidyl ether(EGDE) through an efficient, and green method, and it was cured with isophorone diamine(IPDA) to prepare corresponding thermosets. The cured resins exhibited excellent allaround qualities, particularly in bonding and antibacterial. When 30% PCA was added to pure epoxy resin, the adhesion between substrate and coating increased from 4.40 MPa to 13.60 MPa and the antibacterial rate of coating against E. coli and S. aureus could approach 100%. All of this is due to the fact that the catechol structure present in PCA has the ability to interact with various substrates and alter the permeability of bacterial cell membranes. The architecture of this method offers a fresh approach to dealing with the issues of challenging raw material selection and complex synthesis techniques.展开更多
Ti-containing phosphate（ Ti-P-O ） catalysts with different molar ratios of P to Ti （0--2. 0 ） were synthesized and characterized by XRD, N2-adsorption/desorption, IR and temperature-programmed desorption （TPD） m...Ti-containing phosphate（ Ti-P-O ） catalysts with different molar ratios of P to Ti （0--2. 0 ） were synthesized and characterized by XRD, N2-adsorption/desorption, IR and temperature-programmed desorption （TPD） methods. The catalytic properties of Ti-P-O samples in the vapor-phase O-methylation of catechol with methanol were also studied. The catechol conversion increases with the increase of the molar ratio of P to Ti in a range of 0-0. 33, while a further increase in the P content leads to a decrease of the catalytic activity. Meanwhile, the selectivities of the catalysts to the main product（guaiacol） increase gradually with the increase of the molar ratio of P to Ti. The presence of relatively strong Lewis acidic and/or basic sites in the P-free catalyst should be responsible for the formation of C-alkylation products. The weak acid-base characteristics of the catalysts are favourable for the mono-O-methylation of catechol. In comparison with the Lewis acidic sites, the Bronsted acidic sites on the catalysts are more active for the title reaction.展开更多
Three titanium-containing aluminum phosphate catalysts with a general formula Al 0.77 Ti 0.23 PO 4 were prepared by the sol-gel method at room temperature(APTS), and a nonuniform precipitation procedure at ro...Three titanium-containing aluminum phosphate catalysts with a general formula Al 0.77 Ti 0.23 PO 4 were prepared by the sol-gel method at room temperature(APTS), and a nonuniform precipitation procedure at room temperature(APTR) and under reflux(APTF), respectively. The structural features and the surface properties of the three catalysts were determined by means of the physical adsorption of nitrogen at liquid N 2 temperature, XRD, UV-Vis, NH 3-TPD and IR of adsorbed pyridine. The vapor phase O-alkylation of catechol with ethanol over the prepared catalysts was studied. It was found that the activity and the selectivity of these catalysts are greatly dependent on the preparation method, and catalyst APTF shows the highest activity and selectivity. The characterization evidence indicates that the weak Brnsted acid sites were more effective for the reaction.展开更多
The liquid phase alkylation of catechol with tert-butyl alcohol to produce4-tert-butyl catechol (4-TBC) was carried out over MCM-41, HZSM-5, H-exchanged montmorillonite andnovel acidic porous montmorillonite heterostr...The liquid phase alkylation of catechol with tert-butyl alcohol to produce4-tert-butyl catechol (4-TBC) was carried out over MCM-41, HZSM-5, H-exchanged montmorillonite andnovel acidic porous montmorillonite heterostructures (PMHs). Upon all catalysts tested, 4-TBC is themain product and 3-tert-butyl catechol (3-TBC) and 3,5-di-tert-butyl catechol are the sideproducts. The synthetic PMHs showed higher conversion of catechol and better selectivity to 4-TBCcompared to other solid acid catalysts tested. Over the PMHs derived from H-exchangedmontmorillonite through template extraction processes, the suitable reaction temperature is ca 410K, the ratio of catechol to tert-butyl alcohol is 1:2. Increasing the amount of catalyst (lowerweight hourly space velocity) can improve the conversion of catechol and influence the selectivityslightly. The reasonable reaction time is ca 8 h. The type and strength of acidity ofH-montmorillonite and PMH were determined by pyridine adsorption FT-IR and ammoniatemperature-programmed desorption techniques. The medium and strong acid sites are conducive toproducing 4-TBC and the weak acid sites to facilitating the 3-TBC formation. The differences betweenthe PMHs from calcination and those from extraction are attributed to proton migration and aciditychange in the gallery surface.展开更多
The selective H2O2 oxidation reaction of phenol to catechol on Ln-ZrO2 catalyst has improved the selectivity to 85%, to compare with the conventional titania catalyst. With addition of rare earth such as lanthanum, ne...The selective H2O2 oxidation reaction of phenol to catechol on Ln-ZrO2 catalyst has improved the selectivity to 85%, to compare with the conventional titania catalyst. With addition of rare earth such as lanthanum, neodymium, to zirconia as catalyst, the selectivity is increased by 72% and 60% respectively in comparison with the bare titania catalyst.展开更多
Catechol pollutants(CATPs)serving as chelating agents could coordinate with many metal ions to form various CATPs-metal complexes.Little information is available on the effects of complexation of metal ions on CATPs d...Catechol pollutants(CATPs)serving as chelating agents could coordinate with many metal ions to form various CATPs-metal complexes.Little information is available on the effects of complexation of metal ions on CATPs degradation.This work presents a systematical study of·OH-mediated degradation of catechol and catechol-metal complexes over the whole pH range in advanced oxidation processes(AOPs).Results show that the pH-dependent complexation of metal ions(Zn^(2+),Cu^(2+),Ti^(4+)and Fe^(3+))promotes the deprotonation of catechol under neutral and even acidic conditions.The radical adduct formation(RAF)reactions are both thermodynamically and kinetically favorable for all dissociation and complexa-tion species,and-OH/-O-group-containing C positions are more vulnerable to·OH attack.The kinetic results show that the complexation of the four metal ions offers a wide pH range of effectiveness for catechol degradation.At pH 7,the apparent rate constant(k_(app))values for different systems follow the order of catechol+Ti^(4+)≈catechol+Zn^(2+)>catechol+Cu^(2+)>catechol+Fe^(3+)>catechol.The mechanistic and kinetic results would greatly improve our understanding of the degradation of CATPs-metal and other organics-metal complexes in AOPs.The toxicity assessment indicates that the·OH-based AOPs have the ability for decreasing the toxicity and increasing the biodegradability during the processes of catechol degradation.展开更多
Adsorption of catechol from aqueous solution with the hypercrosslinked polymeric adsorbent NDA-100 and its derivatives AH-1, AH-2 and AH-3 aminated by dimethylamine, the commercial resin Amberlite XAD-4 and weakly bas...Adsorption of catechol from aqueous solution with the hypercrosslinked polymeric adsorbent NDA-100 and its derivatives AH-1, AH-2 and AH-3 aminated by dimethylamine, the commercial resin Amberlite XAD-4 and weakly basic anion exchanger resin D301 was compared. It was found that the aminated hypercrosslinked resins had the highest adsorption capacities among the tested polymers. The empirical Freundlich equation was successfully employed to describe the adsorption process. Specific surface area and micropore structure of the adsorbent, in company with tertiary amino groups on matrix affected the adsorption performance towards catechol. In addition, thermodynamic study was carried out to interpret the adsorption mechanism. Kinetic study testified that the tertiary amino groups on the polymer matrix could decrease the adsorption rate and increase the adsorption apparent activation energy.展开更多
Single crystals of two triptycene-based catechol derivatives 1 and 2 were obtained,and their X-ray crystal structural studies showed that the two tecton molecules had different conformations in the solid state,and the...Single crystals of two triptycene-based catechol derivatives 1 and 2 were obtained,and their X-ray crystal structural studies showed that the two tecton molecules had different conformations in the solid state,and they could self-assemble into interesting 3D networks with solvent molecules included inside, in which multiple O-H…O hydrogen bonds played important roles.展开更多
Catechol adsorbed on TiO_(2)is one of the simplest models to explore the relevant properties of dye-sensitized solar cells.However,the effects of water and defects on the electronic levels and the excitonic properties...Catechol adsorbed on TiO_(2)is one of the simplest models to explore the relevant properties of dye-sensitized solar cells.However,the effects of water and defects on the electronic levels and the excitonic properties of the catechol/TiO_(2)interface have been rarely explored.Here,we investigate four catechol/TiO_(2)interfaces aiming to study the influence of coverage,water,and defects on the electronic levels and the excitonic properties of the catechol/TiO_(2)interface through the first-principles many-body Green’s function theory.We find that the adsorption of catechol on the rutile(110)surface increases the energies of both the TiO_(2)valence band maximum and conduction band minimum by approximately 0.7 eV.The increasing coverage and the presence of water can reduce the optical absorption of charge-transfer excitons with maximum oscillator strength.Regarding the reduced hydroxylated TiO_(2)substrate,the conduction band minimum decreases greatly,resulting in a sub-bandgap of 2.51 eV.The exciton distributions in the four investigated interfaces can spread across several unit cells,especially for the hydroxylated TiO2substrate.Although the hydroxylated TiO_(2)substrate leads to a lower open-circuit voltage,it may increase the separation between photogenerated electrons and holes and may therefore be beneficial for improving the photovoltaic efficiency by controlling its concentration.Our results may provide guidance for the design of highly efficient solar cells in future.展开更多
In this study, in order to explain the solvent and spin state effects on the molecular structure of catechol-Fe complex [Fe(cat)3]n﹣?where n = 2 and 3, Hartree Fock (HF)-Density Functional Theory (DFT) hybrid calcula...In this study, in order to explain the solvent and spin state effects on the molecular structure of catechol-Fe complex [Fe(cat)3]n﹣?where n = 2 and 3, Hartree Fock (HF)-Density Functional Theory (DFT) hybrid calculations are performed at the B3LYP/6-311g(d,p) level of theory. The binding energies of Fe2+ and Fe3+ in high-spin state are higher than intermediate and low-spin states which show that the complex formation in a high spin state is more favorable. The calculated binding energies at different solvents indicate that the binding energies in polar solvents are lower than non-polar solvents. Furthermore, spectroscopic studies including FTIR and Raman spectrum in various solvents reveal that the formation of intermolecular bonds between the oxygen atom of carbonyl group and the hydrogen atom of solvent causes a spectral red shift. The calculated FTIR and geometry parameters are in good agreement with previous experimental data. Donor-acceptor interaction energies are evaluated due to the importance of the charge transfer in the complex formation. It is observed that the free electrons of oxygen atom interact with the antibonding orbitals of the iron. Finally, some correlations between the quantum chemical reactivity indices of the complexes and solvent polarity are considered. The study indicates a linear correlation between chemical hardness and binding energies of [Fe(cat)3]3﹣?complex.展开更多
The electrochemical polymerization of catechol on platinum has been carried out using repeated potential cycling between -0.2 and 1.1 V (versus SCE). The electrolytic solution consisted of 0.2 mol dm(-3) catechol, 0.5...The electrochemical polymerization of catechol on platinum has been carried out using repeated potential cycling between -0.2 and 1.1 V (versus SCE). The electrolytic solution consisted of 0.2 mol dm(-3) catechol, 0.5 mol dm(-3) NaCl and 0.1 mol dm(-3) Na2HPO4 with pH 8.72. Catechol can not be polymerized at pH greater than or equal to 10.12. Polycatechol has an electrochemical lactivity at pH less than or equal to 4. The anodic and cathodic peak potentials of polycatechol shift towards more negative values as the pH of the solution increases from 1 to 4. The electrochemical activity of polycatechol hardly changes in this pH region, but it decreases slowly with time. This is caused by oxygen in air, which leads to an irreversible oxidation of polycatechol. This property is favorable for protecting metals from corrosion. Raman and FTIR spectra of polycatechol and catechol are quite different. AFM images of polycatechol films provide evidence that the image of the oxidized state of polycatechol is markedly different from that of the reduced one. This difference is caused by doping and dedoping of polycatechol.展开更多
Density functional theory (DFT) at B3LYP/6-31G(d,p) level was employed to calculate intramolecular hydrogen bond enthalpies (HIHB), O-H charge differences, O-H bond lengths and bond orders for various substituted cate...Density functional theory (DFT) at B3LYP/6-31G(d,p) level was employed to calculate intramolecular hydrogen bond enthalpies (HIHB), O-H charge differences, O-H bond lengths and bond orders for various substituted catechols and their radicals generated after H-abstraction. It was found that although the charge difference between hydrogen-bonded H and O played a role in determining HIHB, HIHB was mainly governed by the hydrogen bond length. As the oxygen-centered radical has great tendency to form a chemical bond with the H atom, hydrogen bond lengths in catecholic radicals are systematically shorter than those in catechols. Hence, the HIHB for the former are higher than those for the latter.展开更多
In a quest for better chelating therapy drugs for the treatment of intoxication by Fe, Al, oractinides, two new series of mixed catechol-bisphosphonate through amide linkage were synthesized.Benzyl group was used as p...In a quest for better chelating therapy drugs for the treatment of intoxication by Fe, Al, oractinides, two new series of mixed catechol-bisphosphonate through amide linkage were synthesized.Benzyl group was used as protecting group to avoid the breakage of amide by acid hydrolysis orimcomplete reaction in silylation-dealkylation using bromotrimethylsilane.展开更多
An iron（Ⅲ） complex [Fe^Ⅲ（Tpz^Me2）（Hpz^Me2）Cl2]（1） has been synthesized at a low temperature, which contains tripodal ligand, namely, the anionic hydrotris-3,5-dimethyl-pyrazolylborate（Tpz^Me2）. A series of...An iron（Ⅲ） complex [Fe^Ⅲ（Tpz^Me2）（Hpz^Me2）Cl2]（1） has been synthesized at a low temperature, which contains tripodal ligand, namely, the anionic hydrotris-3,5-dimethyl-pyrazolylborate（Tpz^Me2）. A series of iron（Ⅲ） catecholate complexes 2-5 has been obtained via the reaction of compound 1 with catecholate or substituted catecholates. These complexes were characterized by X-ray crystallographic analysis, mass spectrometry and elemental analysis, and the results show that TpzMe2 ligand has the beneficial effect on the stabilization of iron（Ⅲ） catecholate complexes.展开更多
基金supported by the National Natural Science Foundation of China(No.20875059)
文摘The determination method of catechol by fluorescence quenching was developed.The assay was based on the combination of the unique property of gold nanoparticles with tyrosinase enzymatic reaction.In the presence of tyrosinase,the fluorescence of gold nanoparticles was quenched by catechol which can be employed to detect catechol.Under the optimal conditions,a linear range 5.0×10^(-7)-1.0×10^(-3) mol L^(-1) and a detection limit 1.0×10^(-7) mol L^(-1) of catechol were obtained.o-Quinone intermediate produced...
基金Supported by the National High Technology Research and Development Program of China(2006AA03Z460)
文摘In this study, extractive distillation has been applied to separate catechol （CAT） from carbofuran phenol （CFP） with high purity and yield. The relative volatility of CFP to CAT was measured, and the choice of separating agents was investigated. The experimental results indicated that CFP/CAT is an azeotropic system with an azeotropic point at 93.40℃/0.400 kPa and an azeotropic mixture containing 49.96% of CFP and 50.04% of CAT. Data from the determination of the relative volatility have shown that separating agents such as diglycol and 4-butylcatechol （4-TBC） are able to increase the relative volatility up to 1.90. In one shot process batch extractive distillation of CFP mixture with 3% （by mass） diglycol as separating agent, the purity and yield of the obtained CFP was 99.0% and 95.0%, respectively, while the distillation without separating agent provided a purity and yield of only 98.0% and 90.0%, respectively, There was no residual separating agent found in the product.
基金financially supported by the National Natural Science Foundation of China (Nos.U1909220 and 52003283)Science and Technology Innovation 2025 Major Project of Ningbo (Nos.2021Z092, 2022Z111 and 2022Z160)+1 种基金Defense Industrial Technology Development Program (No.JCKY2021513B001)the Research Project of Technology Application for Public Welfare of Ningbo City (No.202002N3122)。
文摘It is of great significance to design epoxy coatings with superior antibacterial properties and high adhesive properties, as well as excellent processing, superior durability, and high transparency. However, it is still a challenge because of the common complex design and synthesis. Herein, the bio-based monomer protocatechuic acid(PCA) was used as raw material, the catechol structure with high bonding and antibacterial properties was introduced into the flexible alkane segment of ethylene glycol diglycidyl ether(EGDE) through an efficient, and green method, and it was cured with isophorone diamine(IPDA) to prepare corresponding thermosets. The cured resins exhibited excellent allaround qualities, particularly in bonding and antibacterial. When 30% PCA was added to pure epoxy resin, the adhesion between substrate and coating increased from 4.40 MPa to 13.60 MPa and the antibacterial rate of coating against E. coli and S. aureus could approach 100%. All of this is due to the fact that the catechol structure present in PCA has the ability to interact with various substrates and alter the permeability of bacterial cell membranes. The architecture of this method offers a fresh approach to dealing with the issues of challenging raw material selection and complex synthesis techniques.
基金Supported by the Development Project of Science and Technology of Jilin Province(Nos. 20050309-1 and 20040563), the Spe-cialized Research Fund for the Doctoral Program of Higher Education(No.20040183003), CNPC(No.JTGS 20040010), and the Na-tional Natural Science Foundation of China(No.20403006)
文摘Ti-containing phosphate（ Ti-P-O ） catalysts with different molar ratios of P to Ti （0--2. 0 ） were synthesized and characterized by XRD, N2-adsorption/desorption, IR and temperature-programmed desorption （TPD） methods. The catalytic properties of Ti-P-O samples in the vapor-phase O-methylation of catechol with methanol were also studied. The catechol conversion increases with the increase of the molar ratio of P to Ti in a range of 0-0. 33, while a further increase in the P content leads to a decrease of the catalytic activity. Meanwhile, the selectivities of the catalysts to the main product（guaiacol） increase gradually with the increase of the molar ratio of P to Ti. The presence of relatively strong Lewis acidic and/or basic sites in the P-free catalyst should be responsible for the formation of C-alkylation products. The weak acid-base characteristics of the catalysts are favourable for the mono-O-methylation of catechol. In comparison with the Lewis acidic sites, the Bronsted acidic sites on the catalysts are more active for the title reaction.
基金Supported by the Foundation of Science of Jilin Province Science and Technique Com mittee( No.990 5 4 6 )
文摘Three titanium-containing aluminum phosphate catalysts with a general formula Al 0.77 Ti 0.23 PO 4 were prepared by the sol-gel method at room temperature(APTS), and a nonuniform precipitation procedure at room temperature(APTR) and under reflux(APTF), respectively. The structural features and the surface properties of the three catalysts were determined by means of the physical adsorption of nitrogen at liquid N 2 temperature, XRD, UV-Vis, NH 3-TPD and IR of adsorbed pyridine. The vapor phase O-alkylation of catechol with ethanol over the prepared catalysts was studied. It was found that the activity and the selectivity of these catalysts are greatly dependent on the preparation method, and catalyst APTF shows the highest activity and selectivity. The characterization evidence indicates that the weak Brnsted acid sites were more effective for the reaction.
基金Supported by the National Natural Science Foundation of China (No. 20376075) the Natural Science Foundation of Zhejiang Province (No. 201057).
文摘The liquid phase alkylation of catechol with tert-butyl alcohol to produce4-tert-butyl catechol (4-TBC) was carried out over MCM-41, HZSM-5, H-exchanged montmorillonite andnovel acidic porous montmorillonite heterostructures (PMHs). Upon all catalysts tested, 4-TBC is themain product and 3-tert-butyl catechol (3-TBC) and 3,5-di-tert-butyl catechol are the sideproducts. The synthetic PMHs showed higher conversion of catechol and better selectivity to 4-TBCcompared to other solid acid catalysts tested. Over the PMHs derived from H-exchangedmontmorillonite through template extraction processes, the suitable reaction temperature is ca 410K, the ratio of catechol to tert-butyl alcohol is 1:2. Increasing the amount of catalyst (lowerweight hourly space velocity) can improve the conversion of catechol and influence the selectivityslightly. The reasonable reaction time is ca 8 h. The type and strength of acidity ofH-montmorillonite and PMH were determined by pyridine adsorption FT-IR and ammoniatemperature-programmed desorption techniques. The medium and strong acid sites are conducive toproducing 4-TBC and the weak acid sites to facilitating the 3-TBC formation. The differences betweenthe PMHs from calcination and those from extraction are attributed to proton migration and aciditychange in the gallery surface.
文摘The selective H2O2 oxidation reaction of phenol to catechol on Ln-ZrO2 catalyst has improved the selectivity to 85%, to compare with the conventional titania catalyst. With addition of rare earth such as lanthanum, neodymium, to zirconia as catalyst, the selectivity is increased by 72% and 60% respectively in comparison with the bare titania catalyst.
基金This work was supported by the National Natural Science Foundation of China(Nos.21777087,21876099 and 21477065)the Fundamental Research Fund of Shandong University(No.2018JC015).
文摘Catechol pollutants(CATPs)serving as chelating agents could coordinate with many metal ions to form various CATPs-metal complexes.Little information is available on the effects of complexation of metal ions on CATPs degradation.This work presents a systematical study of·OH-mediated degradation of catechol and catechol-metal complexes over the whole pH range in advanced oxidation processes(AOPs).Results show that the pH-dependent complexation of metal ions(Zn^(2+),Cu^(2+),Ti^(4+)and Fe^(3+))promotes the deprotonation of catechol under neutral and even acidic conditions.The radical adduct formation(RAF)reactions are both thermodynamically and kinetically favorable for all dissociation and complexa-tion species,and-OH/-O-group-containing C positions are more vulnerable to·OH attack.The kinetic results show that the complexation of the four metal ions offers a wide pH range of effectiveness for catechol degradation.At pH 7,the apparent rate constant(k_(app))values for different systems follow the order of catechol+Ti^(4+)≈catechol+Zn^(2+)>catechol+Cu^(2+)>catechol+Fe^(3+)>catechol.The mechanistic and kinetic results would greatly improve our understanding of the degradation of CATPs-metal and other organics-metal complexes in AOPs.The toxicity assessment indicates that the·OH-based AOPs have the ability for decreasing the toxicity and increasing the biodegradability during the processes of catechol degradation.
文摘Adsorption of catechol from aqueous solution with the hypercrosslinked polymeric adsorbent NDA-100 and its derivatives AH-1, AH-2 and AH-3 aminated by dimethylamine, the commercial resin Amberlite XAD-4 and weakly basic anion exchanger resin D301 was compared. It was found that the aminated hypercrosslinked resins had the highest adsorption capacities among the tested polymers. The empirical Freundlich equation was successfully employed to describe the adsorption process. Specific surface area and micropore structure of the adsorbent, in company with tertiary amino groups on matrix affected the adsorption performance towards catechol. In addition, thermodynamic study was carried out to interpret the adsorption mechanism. Kinetic study testified that the tertiary amino groups on the polymer matrix could decrease the adsorption rate and increase the adsorption apparent activation energy.
基金the National Natural Science Foundation of China (Nos.91127009,20972162)the National Basic Research Program(No.2011CB932501) for financial support
文摘Single crystals of two triptycene-based catechol derivatives 1 and 2 were obtained,and their X-ray crystal structural studies showed that the two tecton molecules had different conformations in the solid state,and they could self-assemble into interesting 3D networks with solvent molecules included inside, in which multiple O-H…O hydrogen bonds played important roles.
基金supported by the Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi(No.2020L0609 and No.2020L0556)the Doctoral research funds of Jinzhong University(jzxybsjjxm2019005)the Basic Research Program in Shanxi Province under the Grant No.20210302124345。
文摘Catechol adsorbed on TiO_(2)is one of the simplest models to explore the relevant properties of dye-sensitized solar cells.However,the effects of water and defects on the electronic levels and the excitonic properties of the catechol/TiO_(2)interface have been rarely explored.Here,we investigate four catechol/TiO_(2)interfaces aiming to study the influence of coverage,water,and defects on the electronic levels and the excitonic properties of the catechol/TiO_(2)interface through the first-principles many-body Green’s function theory.We find that the adsorption of catechol on the rutile(110)surface increases the energies of both the TiO_(2)valence band maximum and conduction band minimum by approximately 0.7 eV.The increasing coverage and the presence of water can reduce the optical absorption of charge-transfer excitons with maximum oscillator strength.Regarding the reduced hydroxylated TiO_(2)substrate,the conduction band minimum decreases greatly,resulting in a sub-bandgap of 2.51 eV.The exciton distributions in the four investigated interfaces can spread across several unit cells,especially for the hydroxylated TiO2substrate.Although the hydroxylated TiO_(2)substrate leads to a lower open-circuit voltage,it may increase the separation between photogenerated electrons and holes and may therefore be beneficial for improving the photovoltaic efficiency by controlling its concentration.Our results may provide guidance for the design of highly efficient solar cells in future.
文摘In this study, in order to explain the solvent and spin state effects on the molecular structure of catechol-Fe complex [Fe(cat)3]n﹣?where n = 2 and 3, Hartree Fock (HF)-Density Functional Theory (DFT) hybrid calculations are performed at the B3LYP/6-311g(d,p) level of theory. The binding energies of Fe2+ and Fe3+ in high-spin state are higher than intermediate and low-spin states which show that the complex formation in a high spin state is more favorable. The calculated binding energies at different solvents indicate that the binding energies in polar solvents are lower than non-polar solvents. Furthermore, spectroscopic studies including FTIR and Raman spectrum in various solvents reveal that the formation of intermolecular bonds between the oxygen atom of carbonyl group and the hydrogen atom of solvent causes a spectral red shift. The calculated FTIR and geometry parameters are in good agreement with previous experimental data. Donor-acceptor interaction energies are evaluated due to the importance of the charge transfer in the complex formation. It is observed that the free electrons of oxygen atom interact with the antibonding orbitals of the iron. Finally, some correlations between the quantum chemical reactivity indices of the complexes and solvent polarity are considered. The study indicates a linear correlation between chemical hardness and binding energies of [Fe(cat)3]3﹣?complex.
基金This work was supported by the National Natural Science Foundation of China (No. 20074027) and the State Key Laboratory of Physical Chemistry of Solid Surface at Xiamen University.
文摘The electrochemical polymerization of catechol on platinum has been carried out using repeated potential cycling between -0.2 and 1.1 V (versus SCE). The electrolytic solution consisted of 0.2 mol dm(-3) catechol, 0.5 mol dm(-3) NaCl and 0.1 mol dm(-3) Na2HPO4 with pH 8.72. Catechol can not be polymerized at pH greater than or equal to 10.12. Polycatechol has an electrochemical lactivity at pH less than or equal to 4. The anodic and cathodic peak potentials of polycatechol shift towards more negative values as the pH of the solution increases from 1 to 4. The electrochemical activity of polycatechol hardly changes in this pH region, but it decreases slowly with time. This is caused by oxygen in air, which leads to an irreversible oxidation of polycatechol. This property is favorable for protecting metals from corrosion. Raman and FTIR spectra of polycatechol and catechol are quite different. AFM images of polycatechol films provide evidence that the image of the oxidized state of polycatechol is markedly different from that of the reduced one. This difference is caused by doping and dedoping of polycatechol.
基金supported by the National Natural Science Foundation of China (Grant No. 30100035).
文摘Density functional theory (DFT) at B3LYP/6-31G(d,p) level was employed to calculate intramolecular hydrogen bond enthalpies (HIHB), O-H charge differences, O-H bond lengths and bond orders for various substituted catechols and their radicals generated after H-abstraction. It was found that although the charge difference between hydrogen-bonded H and O played a role in determining HIHB, HIHB was mainly governed by the hydrogen bond length. As the oxygen-centered radical has great tendency to form a chemical bond with the H atom, hydrogen bond lengths in catecholic radicals are systematically shorter than those in catechols. Hence, the HIHB for the former are higher than those for the latter.
文摘In a quest for better chelating therapy drugs for the treatment of intoxication by Fe, Al, oractinides, two new series of mixed catechol-bisphosphonate through amide linkage were synthesized.Benzyl group was used as protecting group to avoid the breakage of amide by acid hydrolysis orimcomplete reaction in silylation-dealkylation using bromotrimethylsilane.
基金Supported by the Natural Science Foundation of Inner Mongolia University for Nationalities, China(No.MDK2007036)
文摘An iron（Ⅲ） complex [Fe^Ⅲ（Tpz^Me2）（Hpz^Me2）Cl2]（1） has been synthesized at a low temperature, which contains tripodal ligand, namely, the anionic hydrotris-3,5-dimethyl-pyrazolylborate（Tpz^Me2）. A series of iron（Ⅲ） catecholate complexes 2-5 has been obtained via the reaction of compound 1 with catecholate or substituted catecholates. These complexes were characterized by X-ray crystallographic analysis, mass spectrometry and elemental analysis, and the results show that TpzMe2 ligand has the beneficial effect on the stabilization of iron（Ⅲ） catecholate complexes.
