The fatigue resistance of casting polyurethane(CPU)is crucial in various sectors,such as construction,healthcare,and the automotive industry.Despite its importance,no studies have reported on the fatigue threshold of ...The fatigue resistance of casting polyurethane(CPU)is crucial in various sectors,such as construction,healthcare,and the automotive industry.Despite its importance,no studies have reported on the fatigue threshold of CPU.This study employed an advanced Intrinsic Strength Analyzer(ISA)to evaluate the fatigue threshold of CPUs,systematically exploring the effects of three types of isocyanates(PPDI,NDI,TDI)that contribute to hard segment structures based on the cutting method.Employing multiple advanced characterization techniques(XRD,TEM,DSC,AFM),the results indicate that PPDI-based polyurethane exhibits the highest fatigue threshold(182.89 J/m^(2))due to a highest phase separation and a densely packed spherulitic structure,although the hydrogen bonding degree is the lowest(48.3%).Conversely,NDI-based polyurethane,despite having the high hydrogen bonding degree(53.6%),exhibits moderate fatigue performance(122.52 J/m^(2)),likely due to a more scattered microstructure.TDI-based polyurethane,with the highest hydrogen bonding degree(59.1%)but absence of spherulitic structure,shows the lowest fatigue threshold(46.43 J/m^(2)).Compared to common rubbers(NR,NBR,EPDM,BR),the superior fatigue performance of CPU is attributed to its well-organized microstructure,polyurethane possesses a higher fatigue threshold due to its high phase separation degree and orderly and dense spherulitic structure which enhances energy dissipation and reduces crack propagation.展开更多
Orthogonal conditional nonlinear optimal perturbations(O-CNOPs)have been used to generate ensemble forecasting members for achieving high forecasting skill of high-impact weather and climate events.However,highly effi...Orthogonal conditional nonlinear optimal perturbations(O-CNOPs)have been used to generate ensemble forecasting members for achieving high forecasting skill of high-impact weather and climate events.However,highly efficient calculations for O-CNOPs are still challenging in the field of ensemble forecasting.In this study,we combine a gradient-based iterative idea with the Gram‒Schmidt orthogonalization,and propose an iterative optimization method to compute O-CNOPs.This method is different from the original sequential optimization method,and allows parallel computations of O-CNOPs,thus saving a large amount of computational time.We evaluate this method by using the Lorenz-96 model on the basis of the ensemble forecasting ability achieved and on the time consumed for computing O-CNOPs.The results demonstrate that the parallel iterative method causes O-CNOPs to yield reliable ensemble members and to achieve ensemble forecasting skills similar to or even slightly higher than those produced by the sequential method.Moreover,the parallel method significantly reduces the computational time for O-CNOPs.Therefore,the parallel iterative method provides a highly effective and efficient approach for calculating O-CNOPs for ensemble forecasts.Expectedly,it can play an important role in the application of the O-CNOPs to realistic ensemble forecasts for high-impact weather and climate events.展开更多
Nonlinear Rossby waves are used to describe typical wave phenomena in large-scale atmosphere andocean.Owing to the nonlinearity of the involved problems,the weakly nonlinear method,ie the derivative ex-pansion method,...Nonlinear Rossby waves are used to describe typical wave phenomena in large-scale atmosphere andocean.Owing to the nonlinearity of the involved problems,the weakly nonlinear method,ie the derivative ex-pansion method,was mainly used to investigate Rossby waves under the combined effects of the generalizedβ-effect and the basic flow effect.The derivative expansion method has the advantage of capturing the multi-scalecharacteristics of wave processes simultaneously.In the case where the perturbation expansion is independentof secular terms,the nonlinear equations describing the amplitude evolution of nonlinear waves were derived,such as the Korteweg-de Vries equation,the Boussinesq equation and Zakharov-Kuznetsov equation.Both quali-tative and quantitative analyses indicate that the generalizedβ-effect is the key factor inducing the evolution ofRossby solitary waves.展开更多
SiC/Al-based composite foams were prepared by a two-step foaming method.The influence of the SiC content and its distribution uniformity on the foaming stability,cell structure,and mechanical properties of the aluminu...SiC/Al-based composite foams were prepared by a two-step foaming method.The influence of the SiC content and its distribution uniformity on the foaming stability,cell structure,and mechanical properties of the aluminum foams was investigated.The macro/micro-features of the aluminum foams were characterized and analyzed.Results demonstrate that an appropriate increase in SiC content and the uniform distribution of SiC can improve the foaming stability,optimize the cell diameter and cell wall thickness,ameliorate the cell distribution,and enhance the hardness and compressive strength of the aluminum foams.However,either insufficient or excessive SiC leads to uneven distribution of SiC particles,which is unfavorable to foaming stability and good cell structure formation.With 6wt%SiC,both the foaming stability and cell structure of the aluminum foam reach the optimal state,resulting in the highest compressive strength and optimal energy absorption capacity.展开更多
To develop a suitable production process for fiber reinforced investment casting shell mold,three methods were studied:the traditional method(M_(1)),the method of adding fiber into silica sol with mechanical stirring ...To develop a suitable production process for fiber reinforced investment casting shell mold,three methods were studied:the traditional method(M_(1)),the method of adding fiber into silica sol with mechanical stirring and ultrasonic agitation(M_(2)),and the method of adding fiber into slurry with mechanical stirring and ultrasonic agitation for durations of 3,15,30,and 45 min(M_(3)).The bending strength,high-temperature self-load deformation,and thermal conductivity of the shell molds were investigated.The results reveal that the enhancement of fiber dispersion through ultrasonic agitation improves the comprehensive performance of the shell molds.The maximum green bending strength of the shell mold by M_(2) reaches 3.29 MPa,which is 29% higher than that of the shell mold prepared by M_(1).Moreover,the high-temperature self-load deformation of the shell mold is reduced from 0.62% to 0.44%.In addition,simultaneous ultrasonic agitation and mechanical stirring effectively shorten the slurry preparation time while maintaining comparable levels of fiber dispersion.With the process M_(3)-45 min,the fillers are uniformly dispersed in the slurry,and the fired bending strength and the high-temperature self-load deformation reach 6.25 MPa and 0.41%,respectively.Therefore,the proposed ultrasonic agitation route is promising for the fabrication of fiber-reinforced shell molds with excellent fibers dispersion.展开更多
In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to ...In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.展开更多
Centrifugal casting of ductile iron pipe is a high-temperature,semi-continuous production process.However,conducting laboratory research on the solidification process of centrifugal casting of ductile iron pipe presen...Centrifugal casting of ductile iron pipe is a high-temperature,semi-continuous production process.However,conducting laboratory research on the solidification process of centrifugal casting of ductile iron pipe presents significant challenges.In this study,a novel research method was introduced for investigating the solidification process of ductile iron pipe,namely thermal simulation of ductile iron pipe.Comparative research was conducted on the microstructure and properties of the thermal simulation sample and the ductile iron pipe.The findings indicate that the thermal simulation sample and ductile iron pipe exhibit good heat transfer similarity and microstructure similarity.The difference of cooling rate between thermal simulation sample and ductile pipe is less than 0.24℃·s^(-1),and the difference of microstructure content of free cementite,ferrite,and pearlite is less than 5%.The tensile strength of annealed ductile iron pipe is 466 MPa,with an elongation of 16.1%and a Brinell hardness of 156.5 HBW.In comparison,the tensile strength of annealed thermal simulation sample is 482.0 MPa,with an elongation of 15.5%and a Brinell hardness of 159.0 HBW.These results suggest that the thermal simulation experimental research method is both scientific and feasible,offering an objective,reliable,and cost-effective approach to laboratory research on ductile iron pipe.展开更多
Al-Si-Cu-Mg alloy demonstrates a significant age-hardening effect,with its mechanical properties tunable by optimizing the aging parameters.To enhance this effect,the as-cast Al-8.5Si-2Cu-0.9Mg alloy was subjected to ...Al-Si-Cu-Mg alloy demonstrates a significant age-hardening effect,with its mechanical properties tunable by optimizing the aging parameters.To enhance this effect,the as-cast Al-8.5Si-2Cu-0.9Mg alloy was subjected to either single-stage aging at temperatures of 150℃,175℃,200℃,and 225℃for 0.5 h to 20 h;or double-stage aging:involving a first-stage aging treatment at 120℃for 1 h,3 h,5 h,or 7 h,followed by a second-stage aging treatment at 175℃ for 0.5 h to 20 h.The microstructure and mechanical properties were evaluated for samples aged at 175℃/7 h,175℃/10 h,120℃/5 h+175℃/5 h,and 120℃/5 h+175℃/8 h.XRD analysis reveals that the as-cast Al-8.5Si-2Cu-0.9Mg alloy consists of theα-Al,Si,θ-Al_(2)Cu,and Q-Al_(5)Cu_(2)Mg_8Si_6phases.The aging kinetics exhibit a double-peak behavior in both single-stage and double-stage aging processes.Under single-stage aging at 175℃/x h and double-stage aging(120℃/5 h+175℃/x h),the precipitates'size at the first peak is smaller than that at the second peak.Compared with single-stage aging(175℃/7 h),double-stage aging(120℃/5 h+175℃/5 h)produces a finer precipitate in the alloy.Theoretical calculations indicate that the number density and nucleation rate of both the Al_(5)Cu_(2)Mg_8Si_6 and Al_(2)Cu phases are higher during the double-stage aging(120℃/5 h+175℃/5 h)than those during the single-stage aging(175℃/7 h).Additionally,tensile tests at both room temperature and 250℃demonstrate that double-stage aging(120℃/5 h+175℃/5 h)significantly improves the mechanical properties of the alloy compared to single-stage aging(175℃/7 h),suggesting that double-stage aging is more effective for enhancing mechanical properties for this alloy.展开更多
This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SE...This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SEM),which is used to simulate low-frequency ground motion(f<1 Hz)by incorporating an innovative efficient discontinuous Galerkin(DG)method for grid division to accurately model basin sedimentary layers at reduced costs.It also introduces a comprehensive hybrid source model for high-frequency random scattering and a nonlinear analysis module for basin sedimentary layers.Deterministic outcomes are combined with modified three-dimensional stochastic finite fault method(3D-EXSIM)simulations of high-frequency ground motion(f>1 Hz).A fourth-order Butterworth filter with zero phase shift is employed for time-domain filtering of low-and high-frequency time series at a crossover frequency of 1 Hz,merging the low and high-frequency ground motions into a broadband time series.Taking an Ms 6.8 Luding earthquake,as an example,this hybrid method was used for a rapid and efficient simulation analysis of broadband ground motion in the region.The accuracy and efficiency of this hybrid method were verified through comparisons with actually observed station data and empirical attenuation curves.Deterministic method simulation results revealed the effects of mountainous topography,basin effects,nonlinear effects within the basin’s sedimentary layers,and a coupling interaction between the basin and the mountains.The findings are consistent with similar studies,showing that near-fault sedimentary basins significantly focus and amplify strong ground motion,and the soil’s nonlinear behavior in the basin influences ground motion to varying extents at different distances from the fault.The mountainous topography impacts the basin’s response to ground motion,leading to barrier effects.This research provides a scientific foundation for seismic zoning,urban planning,and seismic design in nearfault mountain basin regions.展开更多
Airless tires are essential for enhancing the safety,reliability,and convenience of maintenance of electric bicycles.Polyurethane(PU)is considered a promising candidate for such applications owing to its versatile pro...Airless tires are essential for enhancing the safety,reliability,and convenience of maintenance of electric bicycles.Polyurethane(PU)is considered a promising candidate for such applications owing to its versatile properties.However,their use is limited by insufficient heat resistance and excessive dynamic heat generation under cyclic loading.In this study,star-shaped trifunctional polypropylene glycerol(PPG3)was incorporated into conventional poly(tetramethylene glycol)(PTMG)and 4,4'-methylenediphenyl diisocyanate(MDI)-based systems to construct microporous star-shaped casting polyurethanes(SCPU),with water serving as a green foaming agent.Unlike conventional small-molecule trifunctional crosslinkers that create junctions within hard segment domains,PPG3 introduces long flexible arms between the hard segments,anchoring the crosslinking points at its molecular core.The large steric hindrance of PPG3 effectively suppresses soft segment crystallization and lowers the degree of microphase separation,whereas the crosslinked network restricts chain mobility,thereby reducing dynamic heat generation.These structural features also enhance the heat resistance,yielding a softening temperature of 183℃,which is 30.9%higher than that of polyurethane without PPG3.When applied to airless tires by casting SCPU into rubber treads,the fabricated hybrid airless tires achieved a rolling distance of over 3000 km under a load of 65 kg at 25km/h without structural failure,satisfying practical performance requirements.This strategy offers a simple,solvent-free,and environmentally friendly process,underscoring the potential of SCPU for scalable production of high-performance airless tires.展开更多
This study systematically conducted preparation optimization and performance investigations on Co-modified Ce/TiO_(2) catalysts,with a focus on examining how preparation methods and Co loading regulate the catalyst’s...This study systematically conducted preparation optimization and performance investigations on Co-modified Ce/TiO_(2) catalysts,with a focus on examining how preparation methods and Co loading regulate the catalyst’s low-temperature denitrification activity.After identifying optimal preparation parameters via condition screening,multiple characterization techniques-including BET,XRD,XPS,H_(2)-TPR and in situ DRIFTS-were employed to deeply analyze the catalyst’s physicochemical properties and reaction mechanism.Results demonstrated that compared to the impregnation and co-precipitation methods,the Ce-Co_(0.025)/TiO_(2)-SG catalyst(prepared by the sol-gel method with a Co/Ti mass ratio of 0.025)exhibited significantly superior denitrification activity:NO conversion remained stably above 95%in the 225−350℃ temperature range,and it displayed high N_(2) selectivity.Characterization analysis revealed that abundant surface oxygen vacancies,a high proportion of Ce^(3+) species,and prominent acidic sites collectively contributed to enhancing its low-temperature denitrification performance.This work provides reference value for the development of highly efficient low-temperature denitrification catalysts.展开更多
The Cu-12Fe alloy has attracted significant attention due to its excellent electrical conductivity and electromagnetic shielding capability,high strength,cost-effectiveness,and recyclability.In the present work,the Cu...The Cu-12Fe alloy has attracted significant attention due to its excellent electrical conductivity and electromagnetic shielding capability,high strength,cost-effectiveness,and recyclability.In the present work,the Cu-12Fe alloy strip with the thickness of 2.4 mm was successfully produced by twin-roll strip casting.The microstructure and properties of the Cu-12Fe alloy were tailored by cold rolling and aging treatment.The tensile strength of the as-cast strip is approximately 328 MPa and its elongation is 25%.The Fe phase randomly dispersed in the matrix,and the average size of Fe-rich phase is 2μm.Besides,enrichment of Fe phase is observed in the central layer of the strip,results in the formation of the“sandwich structure”.Moreover,the as-cast strip of Cu-12Fe was directly cold-rolled from 2.4 to 0.12 mm.The directly cold-rolled sample after aging at 450℃for 16 h(ProcessⅠ)shows excellent electrical conductivity of 69.5%IACS,the tensile strength and elongation are 513 MPa and 3.8%,the saturation magnetic flux density is 20.1 emu·g^(-1),and the coercive force is 25.2 Oe.In ProcessⅡ,the as-cast strip firstly cold-rolled to 1.2 mm,then aged at 500℃for 1.5 h,followed by cold rolling to 0.12 mm,finally aged at 450℃for 16 h.The sample after ProcessⅡshows the electrical conductivity of 66.3%IACS,the tensile strength of 533 MPa,an elongation of 3.5%,saturation magnetic flux density of 21.4 emu·g^(-1),and the coercive force of 22.3 Oe.展开更多
The transient phenomena of re-oxidation and slag entrapment occurring in the tundish during the ladle change-over process have been proven detrimental to clean steel production.Therefore,an unsteady three-phase turbul...The transient phenomena of re-oxidation and slag entrapment occurring in the tundish during the ladle change-over process have been proven detrimental to clean steel production.Therefore,an unsteady three-phase turbulence model,coupling velocity,temperature,and phase field was established to study the effect of the ladle shroud immersion depth on the slag eye formation,slag entrainment,slag dragging,air dragging,and flow characteristics during the ladle change-over process of a two-strand tundish.The results showed that reducing the immersion depth decreases the high-velocity region area under the slag layer in the quasi-steady process.During the emptying stage,as the molten bath level gradually decreases,the outlet temperature exhibits a trend of initially decreasing and subsequently increasing across all three shroud immersion depths.However,under a 210 mm shroud immersion depth,molten slag and air are dragged into the shroud,forming slag droplets and causing significant fluctuations,with a maximum scalar velocity of 0.0764 m/s at the monitoring point.In the filling stage,air and molten slag are dragged into the molten bath,forming bubbles and slag droplets at an immersion depth of 210 mm.Bubbles are observed within the molten slag layer,which can readily cause an emulsification phenomenon,making it easier to be dragged as slag droplets.Additionally,the slag eye area measured under 210 mm immersion depth at 45 s is 0.303 m^(2),while the maximum scalar velocity of 2.4259 m/s is detected at 12 s.At an immersion depth of 360 mm,the average area of the slag eye is minimized to 0.06268 m2,with corresponding variances of 0.006753,representing the optimal immersion depth.展开更多
A full-sectional microstructure characterization method was developed to investigate the formation of coarse slag rims during the continuous casting of hypo-peritectic steel.The cross-sectional microstructural analysi...A full-sectional microstructure characterization method was developed to investigate the formation of coarse slag rims during the continuous casting of hypo-peritectic steel.The cross-sectional microstructural analysis of typical slag rims for two highly crystalline powders revealed that their formation was primarily driven by the solidification of the liquid slag.Distinct differences were observed in the microstructures of slag rims from the two powders.Powder A(characterized by a higher breaking temperature and viscosity)displayed alternating lamellar microstructures of coarse and fine phases,with the coarse phases composed of akermanite-gehlenite transition phases.In contrast,powder B(with a lower breaking temperature and viscosity)predominantly comprised regular akermanite-gehlenite crystals interspersed with a certain amount of glassy phases.Numerical simulations of a three-phase fluid flow coupled with heat transfer indicate that slag rim formation correlates with mold oscillation.Solidification of the liquid slag at the slag rim front predominantly occurs during the negative stroke of the mold oscillation.The average heating rate during the ascending stage of the mold reaches approximately 100 K·s^(−1),whereas the average cooling rate during the descending stage attains 400 K·s^(−1).This temperature variation leads to the formation of lamellar microstructures,whereas the ascending stage promotes the formation of coarse structures and thicker slag rims.Based on the powder properties,two distinct formation pathways exist for highly crystalline mold powders.For the powders with a higher breaking temperature,higher viscosity,and narrower solidification range(powder A),coarse microstructures and thicker slag rims were preferentially formed.For powders with lower breaking temperature and viscosity and wider solidification ranges(powder B),the liquid slag resisted rapid solidification,and the extended mushy zone allowed the partial liquid slag to persist at the slag rim front,promoting the formation of a thin slag rim.This study enhances the understanding of slag rim formation in highly crystalline mold powders and provides critical insights into the control of longitudinal surface cracks in hypo-peritectic steel.展开更多
Manual inspection of onba earing casting defects is not realistic and unreliable,particularly in the case of some micro-level anomalies which lead to major defects on a large scale.To address these challenges,we propo...Manual inspection of onba earing casting defects is not realistic and unreliable,particularly in the case of some micro-level anomalies which lead to major defects on a large scale.To address these challenges,we propose BearFusionNet,an attention-based deep learning architecture with multi-stream,which merges both DenseNet201 and MobileNetV2 for feature extraction with a classification head inspired by VGG19.This hybrid design,figuratively beaming from one layer to another,extracts the enormity of representations on different scales,backed by a prepreprocessing pipeline that brings defect saliency to the fore through contrast adjustment,denoising,and edge detection.The use of multi-head self-attention enhances feature fusion,enabling the model to capture both large and small spatial features.BearFusionNet achieves an accuracy of 99.66%and Cohen’s kappa score of 0.9929 in Kaggle’s Real-life Industrial Casting Defects dataset.Both McNemar’s and Wilcoxon signed-rank statistical tests,as well as fivefold cross-validation,are employed to assess the robustness of our proposed model.To interpret the model,we adopt Grad-Cam visualizations,which are the state of the art standard.Furthermore,we deploy BearFusionNet as a webbased system for near real-time inference(5-6 s per prediction),which enables the quickest yet accurate detection with visual explanations.Overall,BearFusionNet is an interpretable,accurate,and deployable solution that can automatically detect casting defects,leading to significant advances in the innovative industrial environment.展开更多
The effects of the high pressure die casting(HPDC)processes on porosity,microstructure,and mechanical properties of heat-treatment-free aluminum silicon(Al-Si)alloys have long been a focal point in automotive die-cast...The effects of the high pressure die casting(HPDC)processes on porosity,microstructure,and mechanical properties of heat-treatment-free aluminum silicon(Al-Si)alloys have long been a focal point in automotive die-casting research.In this work,the combined effect of shot sleeve materials and slow shot speeds on porosity,microstructure and mechanical properties of a newly designed HPDC Al-Si alloy was investigated.Results show that employing a ceramic shot sleeve or increasing the slow shot speed significantly reduces both the average size and area fraction of externally solidified crystals(ESCs),as well as the average pore size and volume fraction.When the slow shot speed is increased from 0.05 m·s^(-1)to 0.1 m·s^(-1),the pore volume fraction decreases by 10.2%in steel-shot-sleeve samples,compared to a substantial 67.1%reduction in ceramic-shot-sleeve samples.At a slow shot speed of 0.1 m·s^(-1),castings produced with a ceramic shot sleeve exhibit superior mechanical properties:8.3%higher yield strength,17.4%greater tensile strength,and an 81.4%improvement in elongation,relative to those from a steel shot sleeve.These findings provide valuable insights for minimizing porosity and coarse ESCs in die castings,offering promising potential for broader industrial applications.展开更多
Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical si...Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical simulation plays a significant role in quantitatively evaluating current processes and making targeted improvements,but its limitations lie in the inability to dynamically reflect the formation outcomes of castings under varying process conditions,making real-time adjustments to gating and riser designs challenging.In this study,an automated design model for gating and riser systems based on integrated parametric 3D modeling-simulation framework is proposed,which enhances the flexibility and usability of evaluating the casting process by simulation.Firstly,geometric feature extraction technology is employed to obtain the geometric information of the target casting.Based on this information,an automated design framework for gating and riser systems is established,incorporating multiple structural parameters for real-time process control.Subsequently,the simulation results for various structural parameters are analyzed,and the influence of these parameters on casting formation is thoroughly investigated.Finally,the optimal design scheme is generated and validated through experimental verification.Simulation analysis and experimental results show that using a larger gate neck(24 mm in side length) and external risers promotes a more uniform temperature distribution and a more stable flow state,effectively eliminating shrinkage cavities and enhancing process yield by 15%.展开更多
The flow behavior of molten steel in the thin slab mold under high casting speed conditions was investigated,with a focus on the multi-mode continuous casting and rolling mold.A steel-slag two-phase flow model was est...The flow behavior of molten steel in the thin slab mold under high casting speed conditions was investigated,with a focus on the multi-mode continuous casting and rolling mold.A steel-slag two-phase flow model was established using large eddy simulation,the volume of fluid,and magnetohydrodynamics methods through numerical simulation.The maximum flow velocity and wave height at the steel-slag interface within the mold are critical evaluation criteria for analyzing asymmetric flow under varying casting speeds and electromagnetic braking.The results indicate that the asymmetric flows within the mold do not occur synchronously.The severity of the asymmetric flow correlates with the velocity difference across the steel-slag interface.A greater biased flow prolongs the time required to revert to a steady state.When the magnetic field intensity is set to 0.24 T and the magnetic pole position is at 390 mm from the steel-slag interface,this configuration can reduce the velocity of the steel-slag interface,thereby mitigating the asymmetric flow.Additionally,it can diminish the velocity,impact depth,and impact intensity on the narrow face of the jet,thus improving the distribution of velocity and turbulent kinetic energy within the mold.This configuration prolongs the time required for the steel-slag interface to transition from a stable state to its maximum velocity and shortens the time for the interface to return to stability from an unstable state.Moreover,it ensures the positional stability of the steel-slag interface,confining its position within−3 mm.展开更多
In order to investigate the effect of die wall thickness on morphologies of defect band,a stepped mold with a wall thickness of 5 mm,4 mm,3 mm,2 mm,and 1 mm was designed to carry out high pressure die casting experime...In order to investigate the effect of die wall thickness on morphologies of defect band,a stepped mold with a wall thickness of 5 mm,4 mm,3 mm,2 mm,and 1 mm was designed to carry out high pressure die casting experiments with AlSi10 MgMn alloy.For castings with wall thickness of 2-4 mm,the ratio of the mean defect band width(w)and mean grain size(d)in the defect band(w/d)ranges 7-18,while it increases to 24.47 for the 5 mm-thick casting.This difference is related with the filling speed and the distribution of externally solidified crystals(ESCs).The mold flow analysis indicates that the filling speed decreases from 25.41 m·s^(-1)to 11.07 m·s^(-1)when wall thickness increases from 2 mm to 5 mm.Due to the decreasing filling speed along the wall thickness,ESCs gradually diffuse from the center to the defect band,which keep the shear strength in the defect band at a high-level during filling.Meanwhile,the shear strength generated during the filling also decreases as the shear rate drops.Finally,the defect bands in the 5 mm-thick region become widen and indistinct,and the porosity is as high as 5.25%.展开更多
基金financially supported by the National Natural Science Foundation of China(No.52473228).
文摘The fatigue resistance of casting polyurethane(CPU)is crucial in various sectors,such as construction,healthcare,and the automotive industry.Despite its importance,no studies have reported on the fatigue threshold of CPU.This study employed an advanced Intrinsic Strength Analyzer(ISA)to evaluate the fatigue threshold of CPUs,systematically exploring the effects of three types of isocyanates(PPDI,NDI,TDI)that contribute to hard segment structures based on the cutting method.Employing multiple advanced characterization techniques(XRD,TEM,DSC,AFM),the results indicate that PPDI-based polyurethane exhibits the highest fatigue threshold(182.89 J/m^(2))due to a highest phase separation and a densely packed spherulitic structure,although the hydrogen bonding degree is the lowest(48.3%).Conversely,NDI-based polyurethane,despite having the high hydrogen bonding degree(53.6%),exhibits moderate fatigue performance(122.52 J/m^(2)),likely due to a more scattered microstructure.TDI-based polyurethane,with the highest hydrogen bonding degree(59.1%)but absence of spherulitic structure,shows the lowest fatigue threshold(46.43 J/m^(2)).Compared to common rubbers(NR,NBR,EPDM,BR),the superior fatigue performance of CPU is attributed to its well-organized microstructure,polyurethane possesses a higher fatigue threshold due to its high phase separation degree and orderly and dense spherulitic structure which enhances energy dissipation and reduces crack propagation.
基金sponsored by the National Natural Science Foundation of China(Grant Nos.41930971,42330111,and 42405061)the National Key Scientific and Technological Infrastructure project“Earth System Numerical Simulation Facility”(Earth Lab).
文摘Orthogonal conditional nonlinear optimal perturbations(O-CNOPs)have been used to generate ensemble forecasting members for achieving high forecasting skill of high-impact weather and climate events.However,highly efficient calculations for O-CNOPs are still challenging in the field of ensemble forecasting.In this study,we combine a gradient-based iterative idea with the Gram‒Schmidt orthogonalization,and propose an iterative optimization method to compute O-CNOPs.This method is different from the original sequential optimization method,and allows parallel computations of O-CNOPs,thus saving a large amount of computational time.We evaluate this method by using the Lorenz-96 model on the basis of the ensemble forecasting ability achieved and on the time consumed for computing O-CNOPs.The results demonstrate that the parallel iterative method causes O-CNOPs to yield reliable ensemble members and to achieve ensemble forecasting skills similar to or even slightly higher than those produced by the sequential method.Moreover,the parallel method significantly reduces the computational time for O-CNOPs.Therefore,the parallel iterative method provides a highly effective and efficient approach for calculating O-CNOPs for ensemble forecasts.Expectedly,it can play an important role in the application of the O-CNOPs to realistic ensemble forecasts for high-impact weather and climate events.
文摘Nonlinear Rossby waves are used to describe typical wave phenomena in large-scale atmosphere andocean.Owing to the nonlinearity of the involved problems,the weakly nonlinear method,ie the derivative ex-pansion method,was mainly used to investigate Rossby waves under the combined effects of the generalizedβ-effect and the basic flow effect.The derivative expansion method has the advantage of capturing the multi-scalecharacteristics of wave processes simultaneously.In the case where the perturbation expansion is independentof secular terms,the nonlinear equations describing the amplitude evolution of nonlinear waves were derived,such as the Korteweg-de Vries equation,the Boussinesq equation and Zakharov-Kuznetsov equation.Both quali-tative and quantitative analyses indicate that the generalizedβ-effect is the key factor inducing the evolution ofRossby solitary waves.
基金Doctoral Startup Fund(20192066,20212028)Laijin Excellent Doctoral Fund(20202021)+1 种基金Scientific and Technological Innovation of Colleges and Universities in Shanxi Province(2020L0342)Fundamental Research Program of Shanxi Province(202303021222178)。
文摘SiC/Al-based composite foams were prepared by a two-step foaming method.The influence of the SiC content and its distribution uniformity on the foaming stability,cell structure,and mechanical properties of the aluminum foams was investigated.The macro/micro-features of the aluminum foams were characterized and analyzed.Results demonstrate that an appropriate increase in SiC content and the uniform distribution of SiC can improve the foaming stability,optimize the cell diameter and cell wall thickness,ameliorate the cell distribution,and enhance the hardness and compressive strength of the aluminum foams.However,either insufficient or excessive SiC leads to uneven distribution of SiC particles,which is unfavorable to foaming stability and good cell structure formation.With 6wt%SiC,both the foaming stability and cell structure of the aluminum foam reach the optimal state,resulting in the highest compressive strength and optimal energy absorption capacity.
基金supported by the National Natural Science Foundation of China (Grant No. 5186504)the University Science Foundation for Young Science and Technology Talents in Inner Mongolia Autonomous Region of China (Grant No. NJYT22078)+2 种基金the Basic Scientific Research Expenses Program of Universities directly under Inner Mongolia Autonomous Region (Grant No. JY20220059)the Inner Mongolia Autonomous Region ‘Grassland Talent’ project Young Innovative Talent Training Program Level ⅠBasic Research Expenses of Universities directly under the Inner Mongolia Autonomous Region (Grant No. ZTY2023040)。
文摘To develop a suitable production process for fiber reinforced investment casting shell mold,three methods were studied:the traditional method(M_(1)),the method of adding fiber into silica sol with mechanical stirring and ultrasonic agitation(M_(2)),and the method of adding fiber into slurry with mechanical stirring and ultrasonic agitation for durations of 3,15,30,and 45 min(M_(3)).The bending strength,high-temperature self-load deformation,and thermal conductivity of the shell molds were investigated.The results reveal that the enhancement of fiber dispersion through ultrasonic agitation improves the comprehensive performance of the shell molds.The maximum green bending strength of the shell mold by M_(2) reaches 3.29 MPa,which is 29% higher than that of the shell mold prepared by M_(1).Moreover,the high-temperature self-load deformation of the shell mold is reduced from 0.62% to 0.44%.In addition,simultaneous ultrasonic agitation and mechanical stirring effectively shorten the slurry preparation time while maintaining comparable levels of fiber dispersion.With the process M_(3)-45 min,the fillers are uniformly dispersed in the slurry,and the fired bending strength and the high-temperature self-load deformation reach 6.25 MPa and 0.41%,respectively.Therefore,the proposed ultrasonic agitation route is promising for the fabrication of fiber-reinforced shell molds with excellent fibers dispersion.
基金Supported in part by Natural Science Foundation of Guangxi(2023GXNSFAA026246)in part by the Central Government's Guide to Local Science and Technology Development Fund(GuikeZY23055044)in part by the National Natural Science Foundation of China(62363003)。
文摘In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.
基金financially supported by the National Natural Science Foundation of China(52130109)。
文摘Centrifugal casting of ductile iron pipe is a high-temperature,semi-continuous production process.However,conducting laboratory research on the solidification process of centrifugal casting of ductile iron pipe presents significant challenges.In this study,a novel research method was introduced for investigating the solidification process of ductile iron pipe,namely thermal simulation of ductile iron pipe.Comparative research was conducted on the microstructure and properties of the thermal simulation sample and the ductile iron pipe.The findings indicate that the thermal simulation sample and ductile iron pipe exhibit good heat transfer similarity and microstructure similarity.The difference of cooling rate between thermal simulation sample and ductile pipe is less than 0.24℃·s^(-1),and the difference of microstructure content of free cementite,ferrite,and pearlite is less than 5%.The tensile strength of annealed ductile iron pipe is 466 MPa,with an elongation of 16.1%and a Brinell hardness of 156.5 HBW.In comparison,the tensile strength of annealed thermal simulation sample is 482.0 MPa,with an elongation of 15.5%and a Brinell hardness of 159.0 HBW.These results suggest that the thermal simulation experimental research method is both scientific and feasible,offering an objective,reliable,and cost-effective approach to laboratory research on ductile iron pipe.
基金supported by the Key R&D Projects in Heilongjiang Province(GA23A901)。
文摘Al-Si-Cu-Mg alloy demonstrates a significant age-hardening effect,with its mechanical properties tunable by optimizing the aging parameters.To enhance this effect,the as-cast Al-8.5Si-2Cu-0.9Mg alloy was subjected to either single-stage aging at temperatures of 150℃,175℃,200℃,and 225℃for 0.5 h to 20 h;or double-stage aging:involving a first-stage aging treatment at 120℃for 1 h,3 h,5 h,or 7 h,followed by a second-stage aging treatment at 175℃ for 0.5 h to 20 h.The microstructure and mechanical properties were evaluated for samples aged at 175℃/7 h,175℃/10 h,120℃/5 h+175℃/5 h,and 120℃/5 h+175℃/8 h.XRD analysis reveals that the as-cast Al-8.5Si-2Cu-0.9Mg alloy consists of theα-Al,Si,θ-Al_(2)Cu,and Q-Al_(5)Cu_(2)Mg_8Si_6phases.The aging kinetics exhibit a double-peak behavior in both single-stage and double-stage aging processes.Under single-stage aging at 175℃/x h and double-stage aging(120℃/5 h+175℃/x h),the precipitates'size at the first peak is smaller than that at the second peak.Compared with single-stage aging(175℃/7 h),double-stage aging(120℃/5 h+175℃/5 h)produces a finer precipitate in the alloy.Theoretical calculations indicate that the number density and nucleation rate of both the Al_(5)Cu_(2)Mg_8Si_6 and Al_(2)Cu phases are higher during the double-stage aging(120℃/5 h+175℃/5 h)than those during the single-stage aging(175℃/7 h).Additionally,tensile tests at both room temperature and 250℃demonstrate that double-stage aging(120℃/5 h+175℃/5 h)significantly improves the mechanical properties of the alloy compared to single-stage aging(175℃/7 h),suggesting that double-stage aging is more effective for enhancing mechanical properties for this alloy.
基金National Natural Science Foundation of China under Grant Nos.U2139208 and 52278516Key Laboratory of Earthquake Engineering and Engineering Vibration,China Earthquake Administration under Grant No.2024D15Key Laboratory of Soft Soil Characteristic and Engineering Environment,Tianjin Chengjian University under Grant No.2022SCEEKL003。
文摘This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SEM),which is used to simulate low-frequency ground motion(f<1 Hz)by incorporating an innovative efficient discontinuous Galerkin(DG)method for grid division to accurately model basin sedimentary layers at reduced costs.It also introduces a comprehensive hybrid source model for high-frequency random scattering and a nonlinear analysis module for basin sedimentary layers.Deterministic outcomes are combined with modified three-dimensional stochastic finite fault method(3D-EXSIM)simulations of high-frequency ground motion(f>1 Hz).A fourth-order Butterworth filter with zero phase shift is employed for time-domain filtering of low-and high-frequency time series at a crossover frequency of 1 Hz,merging the low and high-frequency ground motions into a broadband time series.Taking an Ms 6.8 Luding earthquake,as an example,this hybrid method was used for a rapid and efficient simulation analysis of broadband ground motion in the region.The accuracy and efficiency of this hybrid method were verified through comparisons with actually observed station data and empirical attenuation curves.Deterministic method simulation results revealed the effects of mountainous topography,basin effects,nonlinear effects within the basin’s sedimentary layers,and a coupling interaction between the basin and the mountains.The findings are consistent with similar studies,showing that near-fault sedimentary basins significantly focus and amplify strong ground motion,and the soil’s nonlinear behavior in the basin influences ground motion to varying extents at different distances from the fault.The mountainous topography impacts the basin’s response to ground motion,leading to barrier effects.This research provides a scientific foundation for seismic zoning,urban planning,and seismic design in nearfault mountain basin regions.
基金financially supported by the National Natural Science Foundation of China(No.52303063)Hubei Provincial Department of Education Guided Scientific Research Project(No.B2024056)。
文摘Airless tires are essential for enhancing the safety,reliability,and convenience of maintenance of electric bicycles.Polyurethane(PU)is considered a promising candidate for such applications owing to its versatile properties.However,their use is limited by insufficient heat resistance and excessive dynamic heat generation under cyclic loading.In this study,star-shaped trifunctional polypropylene glycerol(PPG3)was incorporated into conventional poly(tetramethylene glycol)(PTMG)and 4,4'-methylenediphenyl diisocyanate(MDI)-based systems to construct microporous star-shaped casting polyurethanes(SCPU),with water serving as a green foaming agent.Unlike conventional small-molecule trifunctional crosslinkers that create junctions within hard segment domains,PPG3 introduces long flexible arms between the hard segments,anchoring the crosslinking points at its molecular core.The large steric hindrance of PPG3 effectively suppresses soft segment crystallization and lowers the degree of microphase separation,whereas the crosslinked network restricts chain mobility,thereby reducing dynamic heat generation.These structural features also enhance the heat resistance,yielding a softening temperature of 183℃,which is 30.9%higher than that of polyurethane without PPG3.When applied to airless tires by casting SCPU into rubber treads,the fabricated hybrid airless tires achieved a rolling distance of over 3000 km under a load of 65 kg at 25km/h without structural failure,satisfying practical performance requirements.This strategy offers a simple,solvent-free,and environmentally friendly process,underscoring the potential of SCPU for scalable production of high-performance airless tires.
基金Supported by the National Key Research and Development Program of China (2023YFB4102903)。
文摘This study systematically conducted preparation optimization and performance investigations on Co-modified Ce/TiO_(2) catalysts,with a focus on examining how preparation methods and Co loading regulate the catalyst’s low-temperature denitrification activity.After identifying optimal preparation parameters via condition screening,multiple characterization techniques-including BET,XRD,XPS,H_(2)-TPR and in situ DRIFTS-were employed to deeply analyze the catalyst’s physicochemical properties and reaction mechanism.Results demonstrated that compared to the impregnation and co-precipitation methods,the Ce-Co_(0.025)/TiO_(2)-SG catalyst(prepared by the sol-gel method with a Co/Ti mass ratio of 0.025)exhibited significantly superior denitrification activity:NO conversion remained stably above 95%in the 225−350℃ temperature range,and it displayed high N_(2) selectivity.Characterization analysis revealed that abundant surface oxygen vacancies,a high proportion of Ce^(3+) species,and prominent acidic sites collectively contributed to enhancing its low-temperature denitrification performance.This work provides reference value for the development of highly efficient low-temperature denitrification catalysts.
基金financially supported by the Natural Science Foundation of Liaoning Province of China(2022-MS-109)the Key Research and Development Program of Liaoning Province(2023JH2/101800045)the Ministry of Science and Technology of the Peoples Republic of China(ZZ2021006).
文摘The Cu-12Fe alloy has attracted significant attention due to its excellent electrical conductivity and electromagnetic shielding capability,high strength,cost-effectiveness,and recyclability.In the present work,the Cu-12Fe alloy strip with the thickness of 2.4 mm was successfully produced by twin-roll strip casting.The microstructure and properties of the Cu-12Fe alloy were tailored by cold rolling and aging treatment.The tensile strength of the as-cast strip is approximately 328 MPa and its elongation is 25%.The Fe phase randomly dispersed in the matrix,and the average size of Fe-rich phase is 2μm.Besides,enrichment of Fe phase is observed in the central layer of the strip,results in the formation of the“sandwich structure”.Moreover,the as-cast strip of Cu-12Fe was directly cold-rolled from 2.4 to 0.12 mm.The directly cold-rolled sample after aging at 450℃for 16 h(ProcessⅠ)shows excellent electrical conductivity of 69.5%IACS,the tensile strength and elongation are 513 MPa and 3.8%,the saturation magnetic flux density is 20.1 emu·g^(-1),and the coercive force is 25.2 Oe.In ProcessⅡ,the as-cast strip firstly cold-rolled to 1.2 mm,then aged at 500℃for 1.5 h,followed by cold rolling to 0.12 mm,finally aged at 450℃for 16 h.The sample after ProcessⅡshows the electrical conductivity of 66.3%IACS,the tensile strength of 533 MPa,an elongation of 3.5%,saturation magnetic flux density of 21.4 emu·g^(-1),and the coercive force of 22.3 Oe.
基金supported by the National Natural Science Foundation of China(Nos.52422408 and 52171031)the Liaoning Xingliao Talents-Top-notch Young Talents Project(No.XLYC2203064)+1 种基金the Excellent Youth Fund of Liaoning Natural Science Foundation(No.2023JH3/10200001)the Fundamental Research Funds for the Central Universities(No.N2425004).
文摘The transient phenomena of re-oxidation and slag entrapment occurring in the tundish during the ladle change-over process have been proven detrimental to clean steel production.Therefore,an unsteady three-phase turbulence model,coupling velocity,temperature,and phase field was established to study the effect of the ladle shroud immersion depth on the slag eye formation,slag entrainment,slag dragging,air dragging,and flow characteristics during the ladle change-over process of a two-strand tundish.The results showed that reducing the immersion depth decreases the high-velocity region area under the slag layer in the quasi-steady process.During the emptying stage,as the molten bath level gradually decreases,the outlet temperature exhibits a trend of initially decreasing and subsequently increasing across all three shroud immersion depths.However,under a 210 mm shroud immersion depth,molten slag and air are dragged into the shroud,forming slag droplets and causing significant fluctuations,with a maximum scalar velocity of 0.0764 m/s at the monitoring point.In the filling stage,air and molten slag are dragged into the molten bath,forming bubbles and slag droplets at an immersion depth of 210 mm.Bubbles are observed within the molten slag layer,which can readily cause an emulsification phenomenon,making it easier to be dragged as slag droplets.Additionally,the slag eye area measured under 210 mm immersion depth at 45 s is 0.303 m^(2),while the maximum scalar velocity of 2.4259 m/s is detected at 12 s.At an immersion depth of 360 mm,the average area of the slag eye is minimized to 0.06268 m2,with corresponding variances of 0.006753,representing the optimal immersion depth.
基金supported by the National Natural Science Foundation of China(No.52274318).
文摘A full-sectional microstructure characterization method was developed to investigate the formation of coarse slag rims during the continuous casting of hypo-peritectic steel.The cross-sectional microstructural analysis of typical slag rims for two highly crystalline powders revealed that their formation was primarily driven by the solidification of the liquid slag.Distinct differences were observed in the microstructures of slag rims from the two powders.Powder A(characterized by a higher breaking temperature and viscosity)displayed alternating lamellar microstructures of coarse and fine phases,with the coarse phases composed of akermanite-gehlenite transition phases.In contrast,powder B(with a lower breaking temperature and viscosity)predominantly comprised regular akermanite-gehlenite crystals interspersed with a certain amount of glassy phases.Numerical simulations of a three-phase fluid flow coupled with heat transfer indicate that slag rim formation correlates with mold oscillation.Solidification of the liquid slag at the slag rim front predominantly occurs during the negative stroke of the mold oscillation.The average heating rate during the ascending stage of the mold reaches approximately 100 K·s^(−1),whereas the average cooling rate during the descending stage attains 400 K·s^(−1).This temperature variation leads to the formation of lamellar microstructures,whereas the ascending stage promotes the formation of coarse structures and thicker slag rims.Based on the powder properties,two distinct formation pathways exist for highly crystalline mold powders.For the powders with a higher breaking temperature,higher viscosity,and narrower solidification range(powder A),coarse microstructures and thicker slag rims were preferentially formed.For powders with lower breaking temperature and viscosity and wider solidification ranges(powder B),the liquid slag resisted rapid solidification,and the extended mushy zone allowed the partial liquid slag to persist at the slag rim front,promoting the formation of a thin slag rim.This study enhances the understanding of slag rim formation in highly crystalline mold powders and provides critical insights into the control of longitudinal surface cracks in hypo-peritectic steel.
基金funded by Multimedia University,Cyberjaya,Selangor,Malaysia(Grant Number:PostDoc(MMUI/240029)).
文摘Manual inspection of onba earing casting defects is not realistic and unreliable,particularly in the case of some micro-level anomalies which lead to major defects on a large scale.To address these challenges,we propose BearFusionNet,an attention-based deep learning architecture with multi-stream,which merges both DenseNet201 and MobileNetV2 for feature extraction with a classification head inspired by VGG19.This hybrid design,figuratively beaming from one layer to another,extracts the enormity of representations on different scales,backed by a prepreprocessing pipeline that brings defect saliency to the fore through contrast adjustment,denoising,and edge detection.The use of multi-head self-attention enhances feature fusion,enabling the model to capture both large and small spatial features.BearFusionNet achieves an accuracy of 99.66%and Cohen’s kappa score of 0.9929 in Kaggle’s Real-life Industrial Casting Defects dataset.Both McNemar’s and Wilcoxon signed-rank statistical tests,as well as fivefold cross-validation,are employed to assess the robustness of our proposed model.To interpret the model,we adopt Grad-Cam visualizations,which are the state of the art standard.Furthermore,we deploy BearFusionNet as a webbased system for near real-time inference(5-6 s per prediction),which enables the quickest yet accurate detection with visual explanations.Overall,BearFusionNet is an interpretable,accurate,and deployable solution that can automatically detect casting defects,leading to significant advances in the innovative industrial environment.
基金the National Key Research and Development Program of China(Grant No.2022YFB3404201)the National Natural Science Foundation of China(Grant Nos.52175335,52405342)+1 种基金the Natural Science Foundation Joint Foundation of Liaoning province(Grant No.2023-B SB A-108)the Fundamental Research Funds for the Central Universities(Grant No.N2402005)。
文摘The effects of the high pressure die casting(HPDC)processes on porosity,microstructure,and mechanical properties of heat-treatment-free aluminum silicon(Al-Si)alloys have long been a focal point in automotive die-casting research.In this work,the combined effect of shot sleeve materials and slow shot speeds on porosity,microstructure and mechanical properties of a newly designed HPDC Al-Si alloy was investigated.Results show that employing a ceramic shot sleeve or increasing the slow shot speed significantly reduces both the average size and area fraction of externally solidified crystals(ESCs),as well as the average pore size and volume fraction.When the slow shot speed is increased from 0.05 m·s^(-1)to 0.1 m·s^(-1),the pore volume fraction decreases by 10.2%in steel-shot-sleeve samples,compared to a substantial 67.1%reduction in ceramic-shot-sleeve samples.At a slow shot speed of 0.1 m·s^(-1),castings produced with a ceramic shot sleeve exhibit superior mechanical properties:8.3%higher yield strength,17.4%greater tensile strength,and an 81.4%improvement in elongation,relative to those from a steel shot sleeve.These findings provide valuable insights for minimizing porosity and coarse ESCs in die castings,offering promising potential for broader industrial applications.
基金financially supported by the National Key Research and Development Program of China (2022YFB3706802)。
文摘Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical simulation plays a significant role in quantitatively evaluating current processes and making targeted improvements,but its limitations lie in the inability to dynamically reflect the formation outcomes of castings under varying process conditions,making real-time adjustments to gating and riser designs challenging.In this study,an automated design model for gating and riser systems based on integrated parametric 3D modeling-simulation framework is proposed,which enhances the flexibility and usability of evaluating the casting process by simulation.Firstly,geometric feature extraction technology is employed to obtain the geometric information of the target casting.Based on this information,an automated design framework for gating and riser systems is established,incorporating multiple structural parameters for real-time process control.Subsequently,the simulation results for various structural parameters are analyzed,and the influence of these parameters on casting formation is thoroughly investigated.Finally,the optimal design scheme is generated and validated through experimental verification.Simulation analysis and experimental results show that using a larger gate neck(24 mm in side length) and external risers promotes a more uniform temperature distribution and a more stable flow state,effectively eliminating shrinkage cavities and enhancing process yield by 15%.
基金support from the National Natural Science Foundation of China(Grant Nos.52174313 and 52304350)thank all members of the Hebei High Quality Steel Continuous Casting Engineering Technology Research Center at North China University of Science and Technology,Tangshan,China.
文摘The flow behavior of molten steel in the thin slab mold under high casting speed conditions was investigated,with a focus on the multi-mode continuous casting and rolling mold.A steel-slag two-phase flow model was established using large eddy simulation,the volume of fluid,and magnetohydrodynamics methods through numerical simulation.The maximum flow velocity and wave height at the steel-slag interface within the mold are critical evaluation criteria for analyzing asymmetric flow under varying casting speeds and electromagnetic braking.The results indicate that the asymmetric flows within the mold do not occur synchronously.The severity of the asymmetric flow correlates with the velocity difference across the steel-slag interface.A greater biased flow prolongs the time required to revert to a steady state.When the magnetic field intensity is set to 0.24 T and the magnetic pole position is at 390 mm from the steel-slag interface,this configuration can reduce the velocity of the steel-slag interface,thereby mitigating the asymmetric flow.Additionally,it can diminish the velocity,impact depth,and impact intensity on the narrow face of the jet,thus improving the distribution of velocity and turbulent kinetic energy within the mold.This configuration prolongs the time required for the steel-slag interface to transition from a stable state to its maximum velocity and shortens the time for the interface to return to stability from an unstable state.Moreover,it ensures the positional stability of the steel-slag interface,confining its position within−3 mm.
基金supported by the National Natural Science Foundation of China(No.52474396 and 52175284)the National Key Research and Development Program of China(Grant No.2022YFB3404201)。
文摘In order to investigate the effect of die wall thickness on morphologies of defect band,a stepped mold with a wall thickness of 5 mm,4 mm,3 mm,2 mm,and 1 mm was designed to carry out high pressure die casting experiments with AlSi10 MgMn alloy.For castings with wall thickness of 2-4 mm,the ratio of the mean defect band width(w)and mean grain size(d)in the defect band(w/d)ranges 7-18,while it increases to 24.47 for the 5 mm-thick casting.This difference is related with the filling speed and the distribution of externally solidified crystals(ESCs).The mold flow analysis indicates that the filling speed decreases from 25.41 m·s^(-1)to 11.07 m·s^(-1)when wall thickness increases from 2 mm to 5 mm.Due to the decreasing filling speed along the wall thickness,ESCs gradually diffuse from the center to the defect band,which keep the shear strength in the defect band at a high-level during filling.Meanwhile,the shear strength generated during the filling also decreases as the shear rate drops.Finally,the defect bands in the 5 mm-thick region become widen and indistinct,and the porosity is as high as 5.25%.
