The role of forest litter as an acid-base buffering system was assessed by litter from plantation and natural forests in South China. Samples were either extracted with acid solutions or titrated with acid or base sol...The role of forest litter as an acid-base buffering system was assessed by litter from plantation and natural forests in South China. Samples were either extracted with acid solutions or titrated with acid or base solutions. Litter was found to be a strong acid-base buffering system. Two legume species, Acacia mangium Willd and A. auriculaiformis A. Cunn, had very high litter pH values of around 6, which was 2 pH units higher than that of the soil where they grew. Litter of all other plantation species had litter pH of around 4, similar to that of the soil. Both legume species have high potential to neutralize soil acidity and the litter layer could act to shield soil against acid rain. The current stand of two legume species was estimated to be able to raise rain acidity by 0.1 to 0.4 pH units. Inorganic ions did not fully explain the pH pattern of different litter extracts, but high sodium and low nitrate partly accounted for the high pH of the two legume species. Some natural forest species had extremely low pH. As a whole, the litter of the natural climax forest was the driving force of soil acidification. Although plant residues are strong acid-base buffering system and able to adjust acidity of environment, only a few species can be expected to make soil more acid or alkaline through this mechanism since most species have litter pH values similar to those of soil where they grow.展开更多
The dynamic math model of shift clutch in engagement process was determined on the basis of hydraulic buffering valve and shift clutch of a power shift steering transmission. The influence of buffering pressure chara...The dynamic math model of shift clutch in engagement process was determined on the basis of hydraulic buffering valve and shift clutch of a power shift steering transmission. The influence of buffering pressure characteristic on shift clutch engagement process was analyzed. The study results could be used to the characteristics match of the shift clutch with the hydraulic system of the high speed tracked vehicle power shift steering transmission and the performance prediction.展开更多
In this paper, the efficiencies of two production lines, one is with commonly, the other is with separately buffer capacities are compared, the result is that the former one is better than the latter
In the research, reform of rural collective economy property right system in Beijing rural-urban continuum was explored in terms of background, cause, pro- cess and practice modes by surveying and interviewing, and th...In the research, reform of rural collective economy property right system in Beijing rural-urban continuum was explored in terms of background, cause, pro- cess and practice modes by surveying and interviewing, and the value of system reform on urbanization in rural areas was illustrated from the perspective of farmers who lose lands. The results showed that since reform and opening-up, disadvan- tages of collective economy property are always the fundamental cause of reform; rural-urban contradiction produced from rapid urbanization makes the reform much more urgent; shareholding co-operative system is the essence of reform of collective economy property right system. Rural collective economy property right system in Beijing includes stock-assets quantification shareholding co-operative system, share- capitalization of contractual land management right, farmers as shareholders by investment, and resource and capital mode, with advantages and disadvantages respectively. The common character should be noticed is that all modes have share on contractual right of land, indicating the core of the reform of property system lies in asset quantification and stock quota. In improving urban-rural integration and modern market system, as well as endowing more rights to farmers, reform of rural collective economy property right system is of great significance, which provides a transition space and buffer mechanism for urbanization in rural areas.展开更多
Many rock avalanches were triggered by the Wenchuan earthquake on May 12, 2008 in southwest China. Protection galleries covered with a single soil layer are usually used to protect against rockfall. Since one-layer pr...Many rock avalanches were triggered by the Wenchuan earthquake on May 12, 2008 in southwest China. Protection galleries covered with a single soil layer are usually used to protect against rockfall. Since one-layer protection galleries do not have sufficient buffer capacity, a two-layered absorbing system has been designed. This study aims to find whether an expanded poly-styrol （EPS） cushion, which is used in the soil-covered protection galleries for shock absorption, could be positioned under dynamic loadings. The dynamic impacts of the two-layered absorbing system under the conditions of rock avalanches are numerically simulated through a 2D discrete dement method. By selecting reasonable parameters, a series of numerical experiments were conducted to find the best combination for the two- layered absorbing system. The values of the EPS layer area as a percentage of the total area were set as 0% （Sl）, 22~ （S2）, and 70% （$3）. 22~ of the area of the EPS layer was found to be a reasonable value, and experiments were conducted to find the best position of the EPS layer in the two-layered absorbing system. The numerical results yield useful conclusions regarding the interaction between the impacting avalanches and the two-layered absorbing system. The soil layer can absorb the shock energy effectively and S2 （0.4-m thick EPS cushion covered with soil layer） is the most efficient combination, which can reduce the impact force, compared with the other combinations.展开更多
The effects of soil solid components on soil sensitivity to acid deposition by sequential extraction method were studied. A multiple regression equation of soil sensitivity was set up on the basis of stepwise regressi...The effects of soil solid components on soil sensitivity to acid deposition by sequential extraction method were studied. A multiple regression equation of soil sensitivity was set up on the basis of stepwise regression analysis. The results showed that organic matter expressed dual effects that were decided by soil original pH value and exchangeable cation composition on acid buffering reactions. The hydrolysis of activated oxides was a very important proton buffering reaction when in low pH situation. The crystalline oxides also played a role in the buffering reactions, but the role was restricted by the rate of activation of oxides. Meanwhile, the results by stepwise analysis showed that factors that had significant effect on soil acid buffering capacity were content of montmorillite, soil original pH value, Al 0, Mn 0 and CEC in decreasing order. Finally, sixteen soils were classified into four types of sensitive with single index cluster and multiple fuzzy cluster analysis respectively.展开更多
For a nonholonomic mechanics system with the action of small disturbance, the Lie symmetrical perturbation and adiabatic invariants of generalized Hojman type are studied under general infinitesimal transformations of...For a nonholonomic mechanics system with the action of small disturbance, the Lie symmetrical perturbation and adiabatic invariants of generalized Hojman type are studied under general infinitesimal transformations of groups in which the generalized coordinates and time are variable. On the basis of the invariance of disturbed nonholonomic dynamical equations under general infinitesimal transformations, the determining equations, the constrained restriction equations and the additional restriction equations of Lie symmetries of the system are constructed, which only depend on the variables t, qs and q^.s. Based on the definition of higher-order adiabatic invariants of a mechanical system, the perturbation of Lie symmetries for a nonholonomic system with the action of small disturbance is investigated, and the Lie symmetrical adiabatic invariants, the weakly Lie symmetrical adiabatic invariants and the strongly Lie symmetrical adiabatic invariants of generalized Hojman type of disturbed nonholonomic systems are obtained. An example is given to illustrate applications of the results.展开更多
As two independent problems,scheduling for parts fabrication line and sequencing for mixed-model assembly line have been addressed respectively by many researchers.However,these two problems should be considered simul...As two independent problems,scheduling for parts fabrication line and sequencing for mixed-model assembly line have been addressed respectively by many researchers.However,these two problems should be considered simultaneously to improve the efficiency of the whole fabrication/assembly systems.By far,little research effort is devoted to sequencing problems for mixed-model fabrication/assembly systems.This paper is concerned about the sequencing problems in pull production systems which are composed of one mixed-model assembly line with limited intermediate buffers and two flexible parts fabrication flow lines with identical parallel machines and limited intermediate buffers.Two objectives are considered simultaneously：minimizing the total variation in parts consumption in the assembly line and minimizing the total makespan cost in the fabrication/assembly system.The integrated optimization framework,mathematical models and the method to construct the complete schedules for the fabrication lines according to the production sequences for the first stage in fabrication lines are presented.Since the above problems are non-deterministic polynomial-hard（NP-hard）,a modified multi-objective genetic algorithm is proposed for solving the models,in which a method to generate the production sequences for the fabrication lines from the production sequences for the assembly line and a method to generate the initial population are put forward,new selection,crossover and mutation operators are designed,and Pareto ranking method and sharing function method are employed to evaluate the individuals＇ fitness.The feasibility and efficiency of the multi-objective genetic algorithm is shown by computational comparison with a multi-objective simulated annealing algorithm.The sequencing problems for mixed-model production systems can be solved effectively by the proposed modified multi-objective genetic algorithm.展开更多
A scanning multi-axis differential optical absorption spectroscopy （DOAS） system is developed for monitoring tropospheric NO2 abundance. Measurements at different viewing angles near the horizon can be performed seq...A scanning multi-axis differential optical absorption spectroscopy （DOAS） system is developed for monitoring tropospheric NO2 abundance. Measurements at different viewing angles near the horizon can be performed sequentially with one telescope collecting scattered sunlight reflected by a moving mirror. Tropospheric NO2 diurnal variations can be derived from slant column densities （SCDs） of different elevation angles. The result from a field campaign in Beijing in summer of 2005 reveals potential possibility for the monitoring of tropospheric NO2 by multi-axis DOAS technique.展开更多
Large quadruped mammals,such as ruminants,have outstanding motion ability,including running and bounding.These advanced motion abilities are related to the buffer effect of their complicated musculoskeletal systems.Ho...Large quadruped mammals,such as ruminants,have outstanding motion ability,including running and bounding.These advanced motion abilities are related to the buffer effect of their complicated musculoskeletal systems.However,the buffer effect of most bio-robots is not satisfactory owing to the simple design of their buffer systems.In this paper,a physiological analysis of the ruminant musculoskeletal system is presented to explain the intrinsic buffer mechanism of motion.Based on the physical buffer parts of the ruminant limbs,the corresponding bionic mappings were determined.These mappings were used to guide the mechanism design of the robot multistage buffer system.The multistage buffer system includes two main buffer mechanisms:the first stage and the second stage.The buffer mechanism analysis of the first stage and multiple stages is discussed in theory to compare the effects between the normal single buffer system and the novel multistage buffer system.Then,the detailed mechanical structure of the limbs was designed based on the limb mechanism design.To further verify the superior efficacy of the multistage buffer system,the corresponding walking simulation experiments were conducted after the virtual prototype of a quadruped robot with a novel limb was built completely.Both theoretical analysis and simulation experiments prove that the bionic robot design with the novel multistage buffer system achieves better motion performance than the traditional robot buffer design and can be regarded as the design template of the robot limb.展开更多
Soil acidification is a major threat to agricultural sustainability in tropical and subtropical regions.Biodegradable and environmentally friendly materials,such as calcium lignosulfonate(CaLS),calcium poly(aspartic a...Soil acidification is a major threat to agricultural sustainability in tropical and subtropical regions.Biodegradable and environmentally friendly materials,such as calcium lignosulfonate(CaLS),calcium poly(aspartic acid)(PASP-Ca),and calcium polyγ-glutamic acid(γ-PGA-Ca),are known to effectively ameliorate soil acidity.However,their effectiveness in inhibiting soil acidification has not been studied.This study aimed to evaluate the effect of CaLS,PASP-Ca,andγ-PGA-Ca on the resistance of soil toward acidification as directly and indirectly(i.e.,via nitrification)caused by the application of HNO_(3)and urea,respectively.For comparison,Ca(OH)_(2)and lignin were used as the inorganic and organic controls,respectively.Among the materials,γ-PGA-Ca drove the substantial improvements in the pH buffering capacity(pHBC)of the soil and exhibited the greatest potential in inhibiting HNO_(3)-induced soil acidification via protonation of carboxyl,complexing with Al~(3+),and cation exchange processes.Under acidification induced by urea,CaLS was the optimal one in inhibiting acidification and increasing exchangeable acidity during incubation.Furthermore,the sharp reduction in the population sizes of ammonia-oxidizing bacteria(AOB)and ammonia-oxidizing archaea(AOA)confirmed the inhibition of nitrification via CaLS application.Therefore,compared to improving soil pHBC,CaLS may play a more important role in suppressing indirect acidification.Overall,γ-PGA-Ca was superior to PASP-Ca and CaLS in enhancing the soil pHBC and the its resistance to acidification induced by HNO_(3) addition,whereas CaLS was the best at suppressing urea-driven soil acidification by inhibiting nitrification.In conclusion,these results provide a reference for inhibiting soil re-acidification in intensive agricultural systems.展开更多
Collimating lenses are an important component of laser ranging systems,and high overload environments severely affect the beam shaping effect of such lenses.This study proposes a buffer isolation method on the basis o...Collimating lenses are an important component of laser ranging systems,and high overload environments severely affect the beam shaping effect of such lenses.This study proposes a buffer isolation method on the basis of impact stress wave attenuation theory for collimating lens spacers,ANSYS finite element software was applied to simulate the high load dynamics of collimating lenses,and the buffer isolation performance of different materials and composite structures was compared and analysed.Optical simulation analysis of the collimating lenses under different buffer conditions was performed using ZEMAX software to study the mechanism by which a high overload affects the collimating lenses.High overload and optical shaping experiments based on theoretical analysis were further conducted.Results showed the superiority of butadiene rubber to polytetrafluoroethylene after application of 70000 g impact acceleration.The combination-gasket method was superior to the single-gasket method,and the sandwich combination-gasket method was superior to the double-layer combination-gasket method.展开更多
Among the many strategies to fabricate the silicon/carbon composite,yolk/double-shells structure can be regarded as an effective strategy to overcome the intrinsic defects of Si-based anode materials for Li-ion batter...Among the many strategies to fabricate the silicon/carbon composite,yolk/double-shells structure can be regarded as an effective strategy to overcome the intrinsic defects of Si-based anode materials for Li-ion batteries(LIBs).Hereon,a facile and inexpensive technology to prepare silicon/carbon composite with yolk/double-shells structure is proposed,in which the double buffering carbon shells are fabricated.The silicon/carbon nanoparticles with core-shell structure are encapsulated by SiO_(2)and external carbon layer,and it shows the yolk/double-shells structure via etching the SiO_(2)sacrificial layer.The multiply shells structure not only significantly improves the electrical conductivity of composite,but also effectively prevents the exposure of Si particles from the electrolyte composition.Meanwhile,the yolk/double-shells structure can provide enough space to accommodate the volume change of the electrode during charge/discharge process and avoid the pulverization of Si particles.Moreover,the as-prepared YDS-Si/C shows excellent performance as anode of LIBs,the reversible capacity is as high as 1066 mA h g^(-1) at the current density of 0.5 A g^(-1) after 200 cycles.At the same time,the YDS-Si/C has high capacity retention and good cyclic stability.Therefore,the unique architecture design of yolk/double-shells for Si/C composite provides an instructive exploration for the development of next generation anode materials of LIBs with high electrochemical performances and structural stability.展开更多
For transportation of solid backfill material such as waste and fly ash from the surface to the bottom of the shaft in a fully mechanized backfilling coal backfilling coal mining technology, we developed a new vertica...For transportation of solid backfill material such as waste and fly ash from the surface to the bottom of the shaft in a fully mechanized backfilling coal backfilling coal mining technology, we developed a new vertical transportation system to transport this type of solid backfill material. Given the demands imposed on safely in feeding this material, we also investigated the structure and basic parameter of this system. For a mine in the Xingtai mining area the results show that: (1) a vertical transportation system should include three main parts, i.e., a feeding borehole, a maintenance chamber and a storage silo; (2) we determined that 486 mm is a suitable diameter for bore holes, the diameter of the storage silo is 6 m and its height 30 m in this vertical transportation system; (3) a conical buffer was developed to absorb the impact during the feeding process. To ensure normal implementation of fully mechanized backfilling coal mining technology and the safety of underground personnel, we propose a series of security technologies for anti-blockage, storage silo cleaning, high pressure air release and aspiration. This vertical transporting system has been applied in one this particular mine, which has fed about 4 million tons solid material with a feeding depth of 350 m and safely exploited 3 million tons of coal.展开更多
The latest view suggests the inactive core,surface pulverization,and poly sulfide shuttling effect of metal sulfides are responsible for their low capacity and poor cycling performance in sodium-ion batteries(SIBs).Wh...The latest view suggests the inactive core,surface pulverization,and poly sulfide shuttling effect of metal sulfides are responsible for their low capacity and poor cycling performance in sodium-ion batteries(SIBs).Whereas overcoming the above problems based on conventional nanoengineering is not efficient enough.In this work,erythrocyte-like CuS microspheres with an elastic buffering layer of ultrathin poly aniline(PANI) were synthesized through one-step selfassembly growth,followed by in situ polymerization of aniline.When CuS@PANI is used as anode electrode in SIBs,it delivers high capacity,ultrahigh rate capability(500 mAh gat 0.1 A g,and 214.5 mAh gat 40 A g),and superior cycling life of over 7500 cycles at 20 A g.A series of in/ex situ characterization techniques were applied to investigate the structural evolution and sodium-ion storage mechanism.The PANI swollen with electrolyte can stabilize solid electrolyte interface layer,benefit the ion transport/charge transfer at the PANI/electrolyte interface,and restrain the size growth of Cu particles in confined space.Moreover,finite element analyses and density functional simulations confirm that the PANI film effectively buffers the volume expansion,suppresses the surface pulverization,and traps the poly sulfide.展开更多
The 6 MW/4.6 GHz lower hybrid current drive （LHCD） system will be set up on the experimental advanced superconducting tokamak （EAST） for achieving a steady-state op- eration. The high power and continuous wave （C...The 6 MW/4.6 GHz lower hybrid current drive （LHCD） system will be set up on the experimental advanced superconducting tokamak （EAST） for achieving a steady-state op- eration. The high power and continuous wave （CW） mode microwave test bench operating at 250 kW/4.6 GHz has already been finished, which can be used to simulate different kinds of high power microwave environments to test microwave components and units for the new LHCD sys- tem. The power control and data acquisition system on the test bench composed of power control, high reflected power protection and data acquisition function is described here in detail. Long- term operation of the test bench showed that the power control and data acquisition system is very stable and reliable.展开更多
Taking the MK7-3 of USA hydraulic buffer arresting device as the research subject,the dynamical model for the shipboard aircraft arresting system is established,and the magneto-rheological(MR) damper is applied to pul...Taking the MK7-3 of USA hydraulic buffer arresting device as the research subject,the dynamical model for the shipboard aircraft arresting system is established,and the magneto-rheological(MR) damper is applied to pulley shock absorbers for shipboard aircraft block system.Due to the effect of the MR damper has not been known completely and so far MR damper model has not been defined,we use a set of characteristic test of the MR damper,through the process of parameters identification,to establish the dynamical model for the MR damper based on the Bingham plastic model.Then,the fuzzy control rules are designed,the buffer control for the pulley buffer of shipboard aircrafts is completed in touchdown moment based on MR technology. Compared with blocking device of hydraulic pulley buffer in the same condition,the simulations results show that the proposed MR pulley buffer can effectively recognize the impact energy for shipboard block system and reduce the pull peak of arresting cable.It improves significantly safety during landing of the air vehicles and lowers the risk of accidents.展开更多
The time-delayed bistable system subjected to the multiplicative and additive noises is investigated. In the condition of small delay time, the stationary probability distribution function （SPDF） is derived, and und...The time-delayed bistable system subjected to the multiplicative and additive noises is investigated. In the condition of small delay time, the stationary probability distribution function （SPDF） is derived, and under the condition of large delay time, the SPDF is stochastically simulated. The analytical and simulative results indicate that： （i） For the case of λ = 0 （λ denotes the strength of correlations between the multiplicative and additive noises）, the time delay affects weakly the SPDF peak structure, and the symmetrical property of the SPDF two-peak structure does not change with the increasing delay time. （ii） For the case of λ≠0, the two-peak structure changes with the increasing delay time, i.e. one peak goes up and the other go down simultaneously as the delay time increases and along with further increase of the delay time, the lower peak disappears gradually while the higher one goes up, i.e. the structure of the SPDF changes from a bimodal to a unimodal and the system becomes monostable.展开更多
We experimentally demonstrate the butterfly-shaped chaotic attractor we have proposed before lint. J. Nonlin. Sci. Numerical Simulation 7 （2006） 187]. Some basic dynamical properties and chaotic behaviour of this ne...We experimentally demonstrate the butterfly-shaped chaotic attractor we have proposed before lint. J. Nonlin. Sci. Numerical Simulation 7 （2006） 187]. Some basic dynamical properties and chaotic behaviour of this new butterfly attractor are studied and they are in agreement with the results of our theoretical analysis. Moreover, the proposed system is experimental demonstrated.展开更多
文摘The role of forest litter as an acid-base buffering system was assessed by litter from plantation and natural forests in South China. Samples were either extracted with acid solutions or titrated with acid or base solutions. Litter was found to be a strong acid-base buffering system. Two legume species, Acacia mangium Willd and A. auriculaiformis A. Cunn, had very high litter pH values of around 6, which was 2 pH units higher than that of the soil where they grew. Litter of all other plantation species had litter pH of around 4, similar to that of the soil. Both legume species have high potential to neutralize soil acidity and the litter layer could act to shield soil against acid rain. The current stand of two legume species was estimated to be able to raise rain acidity by 0.1 to 0.4 pH units. Inorganic ions did not fully explain the pH pattern of different litter extracts, but high sodium and low nitrate partly accounted for the high pH of the two legume species. Some natural forest species had extremely low pH. As a whole, the litter of the natural climax forest was the driving force of soil acidification. Although plant residues are strong acid-base buffering system and able to adjust acidity of environment, only a few species can be expected to make soil more acid or alkaline through this mechanism since most species have litter pH values similar to those of soil where they grow.
文摘The dynamic math model of shift clutch in engagement process was determined on the basis of hydraulic buffering valve and shift clutch of a power shift steering transmission. The influence of buffering pressure characteristic on shift clutch engagement process was analyzed. The study results could be used to the characteristics match of the shift clutch with the hydraulic system of the high speed tracked vehicle power shift steering transmission and the performance prediction.
文摘In this paper, the efficiencies of two production lines, one is with commonly, the other is with separately buffer capacities are compared, the result is that the former one is better than the latter
基金Supported by Major Project of the National Social Science Fund(13&ZD027)National Natural Science Foundation of China(41371177)the National Science and Technology Support Planning(2012BAJ22B03)~~
文摘In the research, reform of rural collective economy property right system in Beijing rural-urban continuum was explored in terms of background, cause, pro- cess and practice modes by surveying and interviewing, and the value of system reform on urbanization in rural areas was illustrated from the perspective of farmers who lose lands. The results showed that since reform and opening-up, disadvan- tages of collective economy property are always the fundamental cause of reform; rural-urban contradiction produced from rapid urbanization makes the reform much more urgent; shareholding co-operative system is the essence of reform of collective economy property right system. Rural collective economy property right system in Beijing includes stock-assets quantification shareholding co-operative system, share- capitalization of contractual land management right, farmers as shareholders by investment, and resource and capital mode, with advantages and disadvantages respectively. The common character should be noticed is that all modes have share on contractual right of land, indicating the core of the reform of property system lies in asset quantification and stock quota. In improving urban-rural integration and modern market system, as well as endowing more rights to farmers, reform of rural collective economy property right system is of great significance, which provides a transition space and buffer mechanism for urbanization in rural areas.
基金financial support from the Project of National Science Foundation of China(Grant No.41272346)the National Outstanding Youth Funds(Grant No.41225011)+2 种基金financial support from the Science & Technology Research Plan of China Railway Eryuan Engineering Group CO.LTD (Grant No.13164196(13-15))the Project of National Science Foundation of China(Grant Nos. 41472293,91430105)"hundred talents" program of CAS
文摘Many rock avalanches were triggered by the Wenchuan earthquake on May 12, 2008 in southwest China. Protection galleries covered with a single soil layer are usually used to protect against rockfall. Since one-layer protection galleries do not have sufficient buffer capacity, a two-layered absorbing system has been designed. This study aims to find whether an expanded poly-styrol （EPS） cushion, which is used in the soil-covered protection galleries for shock absorption, could be positioned under dynamic loadings. The dynamic impacts of the two-layered absorbing system under the conditions of rock avalanches are numerically simulated through a 2D discrete dement method. By selecting reasonable parameters, a series of numerical experiments were conducted to find the best combination for the two- layered absorbing system. The values of the EPS layer area as a percentage of the total area were set as 0% （Sl）, 22~ （S2）, and 70% （$3）. 22~ of the area of the EPS layer was found to be a reasonable value, and experiments were conducted to find the best position of the EPS layer in the two-layered absorbing system. The numerical results yield useful conclusions regarding the interaction between the impacting avalanches and the two-layered absorbing system. The soil layer can absorb the shock energy effectively and S2 （0.4-m thick EPS cushion covered with soil layer） is the most efficient combination, which can reduce the impact force, compared with the other combinations.
文摘The effects of soil solid components on soil sensitivity to acid deposition by sequential extraction method were studied. A multiple regression equation of soil sensitivity was set up on the basis of stepwise regression analysis. The results showed that organic matter expressed dual effects that were decided by soil original pH value and exchangeable cation composition on acid buffering reactions. The hydrolysis of activated oxides was a very important proton buffering reaction when in low pH situation. The crystalline oxides also played a role in the buffering reactions, but the role was restricted by the rate of activation of oxides. Meanwhile, the results by stepwise analysis showed that factors that had significant effect on soil acid buffering capacity were content of montmorillite, soil original pH value, Al 0, Mn 0 and CEC in decreasing order. Finally, sixteen soils were classified into four types of sensitive with single index cluster and multiple fuzzy cluster analysis respectively.
基金Supported by the National Natural Science Foundation of China under Grant Nos 10372053 and 10472040.
文摘For a nonholonomic mechanics system with the action of small disturbance, the Lie symmetrical perturbation and adiabatic invariants of generalized Hojman type are studied under general infinitesimal transformations of groups in which the generalized coordinates and time are variable. On the basis of the invariance of disturbed nonholonomic dynamical equations under general infinitesimal transformations, the determining equations, the constrained restriction equations and the additional restriction equations of Lie symmetries of the system are constructed, which only depend on the variables t, qs and q^.s. Based on the definition of higher-order adiabatic invariants of a mechanical system, the perturbation of Lie symmetries for a nonholonomic system with the action of small disturbance is investigated, and the Lie symmetrical adiabatic invariants, the weakly Lie symmetrical adiabatic invariants and the strongly Lie symmetrical adiabatic invariants of generalized Hojman type of disturbed nonholonomic systems are obtained. An example is given to illustrate applications of the results.
基金supported by National Natural Science Foundation of China (Grant No.50875101)National Hi-tech Research and Development Program of China (863 Program,Grant No.2007AA04Z186)
文摘As two independent problems,scheduling for parts fabrication line and sequencing for mixed-model assembly line have been addressed respectively by many researchers.However,these two problems should be considered simultaneously to improve the efficiency of the whole fabrication/assembly systems.By far,little research effort is devoted to sequencing problems for mixed-model fabrication/assembly systems.This paper is concerned about the sequencing problems in pull production systems which are composed of one mixed-model assembly line with limited intermediate buffers and two flexible parts fabrication flow lines with identical parallel machines and limited intermediate buffers.Two objectives are considered simultaneously：minimizing the total variation in parts consumption in the assembly line and minimizing the total makespan cost in the fabrication/assembly system.The integrated optimization framework,mathematical models and the method to construct the complete schedules for the fabrication lines according to the production sequences for the first stage in fabrication lines are presented.Since the above problems are non-deterministic polynomial-hard（NP-hard）,a modified multi-objective genetic algorithm is proposed for solving the models,in which a method to generate the production sequences for the fabrication lines from the production sequences for the assembly line and a method to generate the initial population are put forward,new selection,crossover and mutation operators are designed,and Pareto ranking method and sharing function method are employed to evaluate the individuals＇ fitness.The feasibility and efficiency of the multi-objective genetic algorithm is shown by computational comparison with a multi-objective simulated annealing algorithm.The sequencing problems for mixed-model production systems can be solved effectively by the proposed modified multi-objective genetic algorithm.
文摘A scanning multi-axis differential optical absorption spectroscopy （DOAS） system is developed for monitoring tropospheric NO2 abundance. Measurements at different viewing angles near the horizon can be performed sequentially with one telescope collecting scattered sunlight reflected by a moving mirror. Tropospheric NO2 diurnal variations can be derived from slant column densities （SCDs） of different elevation angles. The result from a field campaign in Beijing in summer of 2005 reveals potential possibility for the monitoring of tropospheric NO2 by multi-axis DOAS technique.
基金Supported by the National Key Research and Development Program of China(Grant No.2019YFB1309600)the National Natural Science Foundation of China(Grant Nos.51775011&91748201).
文摘Large quadruped mammals,such as ruminants,have outstanding motion ability,including running and bounding.These advanced motion abilities are related to the buffer effect of their complicated musculoskeletal systems.However,the buffer effect of most bio-robots is not satisfactory owing to the simple design of their buffer systems.In this paper,a physiological analysis of the ruminant musculoskeletal system is presented to explain the intrinsic buffer mechanism of motion.Based on the physical buffer parts of the ruminant limbs,the corresponding bionic mappings were determined.These mappings were used to guide the mechanism design of the robot multistage buffer system.The multistage buffer system includes two main buffer mechanisms:the first stage and the second stage.The buffer mechanism analysis of the first stage and multiple stages is discussed in theory to compare the effects between the normal single buffer system and the novel multistage buffer system.Then,the detailed mechanical structure of the limbs was designed based on the limb mechanism design.To further verify the superior efficacy of the multistage buffer system,the corresponding walking simulation experiments were conducted after the virtual prototype of a quadruped robot with a novel limb was built completely.Both theoretical analysis and simulation experiments prove that the bionic robot design with the novel multistage buffer system achieves better motion performance than the traditional robot buffer design and can be regarded as the design template of the robot limb.
基金supported by the Major project of Ministry of Agriculture and Rural Affairs of the People’s Republic of China(No.NK2022180401)the major project of Ministry of Agriculture and Rural Affairs of the People’s Republic of China(No.NK2022180404)。
文摘Soil acidification is a major threat to agricultural sustainability in tropical and subtropical regions.Biodegradable and environmentally friendly materials,such as calcium lignosulfonate(CaLS),calcium poly(aspartic acid)(PASP-Ca),and calcium polyγ-glutamic acid(γ-PGA-Ca),are known to effectively ameliorate soil acidity.However,their effectiveness in inhibiting soil acidification has not been studied.This study aimed to evaluate the effect of CaLS,PASP-Ca,andγ-PGA-Ca on the resistance of soil toward acidification as directly and indirectly(i.e.,via nitrification)caused by the application of HNO_(3)and urea,respectively.For comparison,Ca(OH)_(2)and lignin were used as the inorganic and organic controls,respectively.Among the materials,γ-PGA-Ca drove the substantial improvements in the pH buffering capacity(pHBC)of the soil and exhibited the greatest potential in inhibiting HNO_(3)-induced soil acidification via protonation of carboxyl,complexing with Al~(3+),and cation exchange processes.Under acidification induced by urea,CaLS was the optimal one in inhibiting acidification and increasing exchangeable acidity during incubation.Furthermore,the sharp reduction in the population sizes of ammonia-oxidizing bacteria(AOB)and ammonia-oxidizing archaea(AOA)confirmed the inhibition of nitrification via CaLS application.Therefore,compared to improving soil pHBC,CaLS may play a more important role in suppressing indirect acidification.Overall,γ-PGA-Ca was superior to PASP-Ca and CaLS in enhancing the soil pHBC and the its resistance to acidification induced by HNO_(3) addition,whereas CaLS was the best at suppressing urea-driven soil acidification by inhibiting nitrification.In conclusion,these results provide a reference for inhibiting soil re-acidification in intensive agricultural systems.
基金National Natural Science Foundation of China(51605227)the Fundamental Research Funds for the Central Universities(NUST30915011303)。
文摘Collimating lenses are an important component of laser ranging systems,and high overload environments severely affect the beam shaping effect of such lenses.This study proposes a buffer isolation method on the basis of impact stress wave attenuation theory for collimating lens spacers,ANSYS finite element software was applied to simulate the high load dynamics of collimating lenses,and the buffer isolation performance of different materials and composite structures was compared and analysed.Optical simulation analysis of the collimating lenses under different buffer conditions was performed using ZEMAX software to study the mechanism by which a high overload affects the collimating lenses.High overload and optical shaping experiments based on theoretical analysis were further conducted.Results showed the superiority of butadiene rubber to polytetrafluoroethylene after application of 70000 g impact acceleration.The combination-gasket method was superior to the single-gasket method,and the sandwich combination-gasket method was superior to the double-layer combination-gasket method.
基金the National Natural Science Foundation of China(No.21703191)Key Project of Strategic New Industry of Hunan Province(No.2016GK4005 and No.2016GK4030)Research Innovation Project for Graduate students of Hunan Province(No.CX2017B302)。
文摘Among the many strategies to fabricate the silicon/carbon composite,yolk/double-shells structure can be regarded as an effective strategy to overcome the intrinsic defects of Si-based anode materials for Li-ion batteries(LIBs).Hereon,a facile and inexpensive technology to prepare silicon/carbon composite with yolk/double-shells structure is proposed,in which the double buffering carbon shells are fabricated.The silicon/carbon nanoparticles with core-shell structure are encapsulated by SiO_(2)and external carbon layer,and it shows the yolk/double-shells structure via etching the SiO_(2)sacrificial layer.The multiply shells structure not only significantly improves the electrical conductivity of composite,but also effectively prevents the exposure of Si particles from the electrolyte composition.Meanwhile,the yolk/double-shells structure can provide enough space to accommodate the volume change of the electrode during charge/discharge process and avoid the pulverization of Si particles.Moreover,the as-prepared YDS-Si/C shows excellent performance as anode of LIBs,the reversible capacity is as high as 1066 mA h g^(-1) at the current density of 0.5 A g^(-1) after 200 cycles.At the same time,the YDS-Si/C has high capacity retention and good cyclic stability.Therefore,the unique architecture design of yolk/double-shells for Si/C composite provides an instructive exploration for the development of next generation anode materials of LIBs with high electrochemical performances and structural stability.
基金support for this work provided by the National Natural Science Foundation of China (No. 51074165)the major program of the National Natural Science Foundation of China (No. 50834004)the Innovation Project of Graduate Students of Jiangsu Province (No. CXZZ11-0308)
文摘For transportation of solid backfill material such as waste and fly ash from the surface to the bottom of the shaft in a fully mechanized backfilling coal backfilling coal mining technology, we developed a new vertical transportation system to transport this type of solid backfill material. Given the demands imposed on safely in feeding this material, we also investigated the structure and basic parameter of this system. For a mine in the Xingtai mining area the results show that: (1) a vertical transportation system should include three main parts, i.e., a feeding borehole, a maintenance chamber and a storage silo; (2) we determined that 486 mm is a suitable diameter for bore holes, the diameter of the storage silo is 6 m and its height 30 m in this vertical transportation system; (3) a conical buffer was developed to absorb the impact during the feeding process. To ensure normal implementation of fully mechanized backfilling coal mining technology and the safety of underground personnel, we propose a series of security technologies for anti-blockage, storage silo cleaning, high pressure air release and aspiration. This vertical transporting system has been applied in one this particular mine, which has fed about 4 million tons solid material with a feeding depth of 350 m and safely exploited 3 million tons of coal.
基金This work was financially supported by the National Natural Science Foundation of China(NSFC.U1904190,51925207,U1910210,52161145101 and 51872277)the Natural Science Foundation for Excellent Young Scholars of Henan Province(Grant No.212300410091)+5 种基金Program for Science and Technology Innovation Talents in Universities of Henan Province(Grant No.22HASTIT005)Key Program of Henan Province for Science and Technology(222102240029)the“Transformational Technologies for Clean Energy and Demonstration”Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDA21000000)the National Synchrotron Radiation Laboratory(KY2060000173)the Joint Fund of the Yulin University and the Dalian National Laboratory for Clean Energy(Grant.YLU-DNL Fund 2021002)the Fundamental Research Funds for the Central Universities(WK2060140026).
文摘The latest view suggests the inactive core,surface pulverization,and poly sulfide shuttling effect of metal sulfides are responsible for their low capacity and poor cycling performance in sodium-ion batteries(SIBs).Whereas overcoming the above problems based on conventional nanoengineering is not efficient enough.In this work,erythrocyte-like CuS microspheres with an elastic buffering layer of ultrathin poly aniline(PANI) were synthesized through one-step selfassembly growth,followed by in situ polymerization of aniline.When CuS@PANI is used as anode electrode in SIBs,it delivers high capacity,ultrahigh rate capability(500 mAh gat 0.1 A g,and 214.5 mAh gat 40 A g),and superior cycling life of over 7500 cycles at 20 A g.A series of in/ex situ characterization techniques were applied to investigate the structural evolution and sodium-ion storage mechanism.The PANI swollen with electrolyte can stabilize solid electrolyte interface layer,benefit the ion transport/charge transfer at the PANI/electrolyte interface,and restrain the size growth of Cu particles in confined space.Moreover,finite element analyses and density functional simulations confirm that the PANI film effectively buffers the volume expansion,suppresses the surface pulverization,and traps the poly sulfide.
基金supported by National Magnetic Confinement Fusion Science Program of China(No.2010GB105001)
文摘The 6 MW/4.6 GHz lower hybrid current drive （LHCD） system will be set up on the experimental advanced superconducting tokamak （EAST） for achieving a steady-state op- eration. The high power and continuous wave （CW） mode microwave test bench operating at 250 kW/4.6 GHz has already been finished, which can be used to simulate different kinds of high power microwave environments to test microwave components and units for the new LHCD sys- tem. The power control and data acquisition system on the test bench composed of power control, high reflected power protection and data acquisition function is described here in detail. Long- term operation of the test bench showed that the power control and data acquisition system is very stable and reliable.
基金the National Natural Science Foundation of China(No.61074090)the Program for Liaoning Excellent Talents in University(No.LR2011005)the Aviation Industry Corporation of China Innovation Funds(No.cxy2011SH)
文摘Taking the MK7-3 of USA hydraulic buffer arresting device as the research subject,the dynamical model for the shipboard aircraft arresting system is established,and the magneto-rheological(MR) damper is applied to pulley shock absorbers for shipboard aircraft block system.Due to the effect of the MR damper has not been known completely and so far MR damper model has not been defined,we use a set of characteristic test of the MR damper,through the process of parameters identification,to establish the dynamical model for the MR damper based on the Bingham plastic model.Then,the fuzzy control rules are designed,the buffer control for the pulley buffer of shipboard aircrafts is completed in touchdown moment based on MR technology. Compared with blocking device of hydraulic pulley buffer in the same condition,the simulations results show that the proposed MR pulley buffer can effectively recognize the impact energy for shipboard block system and reduce the pull peak of arresting cable.It improves significantly safety during landing of the air vehicles and lowers the risk of accidents.
基金Supported by the Natural Science Foundation of Yun Province under Grant No 2006A0002M
文摘The time-delayed bistable system subjected to the multiplicative and additive noises is investigated. In the condition of small delay time, the stationary probability distribution function （SPDF） is derived, and under the condition of large delay time, the SPDF is stochastically simulated. The analytical and simulative results indicate that： （i） For the case of λ = 0 （λ denotes the strength of correlations between the multiplicative and additive noises）, the time delay affects weakly the SPDF peak structure, and the symmetrical property of the SPDF two-peak structure does not change with the increasing delay time. （ii） For the case of λ≠0, the two-peak structure changes with the increasing delay time, i.e. one peak goes up and the other go down simultaneously as the delay time increases and along with further increase of the delay time, the lower peak disappears gradually while the higher one goes up, i.e. the structure of the SPDF changes from a bimodal to a unimodal and the system becomes monostable.
文摘We experimentally demonstrate the butterfly-shaped chaotic attractor we have proposed before lint. J. Nonlin. Sci. Numerical Simulation 7 （2006） 187]. Some basic dynamical properties and chaotic behaviour of this new butterfly attractor are studied and they are in agreement with the results of our theoretical analysis. Moreover, the proposed system is experimental demonstrated.
