The diffuse-interface immersed boundary method(IBM)possesses excellent capabilities for simulating flows around complex geometries and moving boundaries.In this method,the flow field is solved on a fixed Cartesian mes...The diffuse-interface immersed boundary method(IBM)possesses excellent capabilities for simulating flows around complex geometries and moving boundaries.In this method,the flow field is solved on a fixed Cartesian mesh,while the solid boundary is discretized into a series of Lagrangian points immersed in the flow field.The boundary condition is implemented by introducing a force term into the momentum equation,and the interaction between the immersed boundary and the fluid domain is achieved via an interpolation process.Over the past decades,the diffuse-interface IBM has gained popularity and spawned many variants,effectively handling a wide range of flow problems from isothermal to thermal flows,from laminar to turbulent flows,and from complex geometries to fluidstructure interaction scenarios.This paper first outlines the basic principles of the diffuse-interface IBM,then highlights recent advancements achieved by the authors’research group,and finally shows the method’s excellent numerical performance and wide applicability through several case studies involving complex moving boundary problems.展开更多
A hybrid approach based on the immersed boundary method(IBM)is developed for computation of flow-induced sound around moving bodies.In this method,a high-fidelity direct numerical simulation(DNS)solver is used to simu...A hybrid approach based on the immersed boundary method(IBM)is developed for computation of flow-induced sound around moving bodies.In this method,a high-fidelity direct numerical simulation(DNS)solver is used to simulate the incompressible flow field.The sound field is predicted by discretizing acoustic perturbation equations(APEs)with dispersionrelation-preserving space scheme and low-dispersion and low-dissipation Runge-Kutta time integration.A sharp-interface IBM based on ghost-cell is implemented for present two-step DNS-APE approach to deal with complex moving bodies with Cartesian grids.The present method is validated through simulations of sound generation caused by flow past a rotating cylinder,an oscillating cylinder,and tandem oscillating and stationary cylinders.The sound generated by typical kinds of complicated bio-inspired locomotions,i.e.,flapping flight by wings of varied shapes and collective undulatory swimming in tandem,are investigated using present method.The results demonstrate potential of the hybrid approach in addressing flowinduced sound generation and propagation with complex moving boundaries in a fluid medium,especially for the sound characteristics of bio-mimetic flows,which might shed lights on investigations on bio-acoustics,ethology of complex animal system,and related bio-mimetic design for quietness.展开更多
Applying numerical simulation technology to investigate fluid-solid interaction involving complex curved bound-aries is vital in aircraft design,ocean,and construction engineering.However,current methods such as Latti...Applying numerical simulation technology to investigate fluid-solid interaction involving complex curved bound-aries is vital in aircraft design,ocean,and construction engineering.However,current methods such as Lattice Boltzmann(LBM)and the immersion boundary method based on solid ratio(IMB)have limitations in identifying custom curved boundaries.Meanwhile,IBM based on velocity correction(IBM-VC)suffers from inaccuracies and numerical instability.Therefore,this study introduces a high-accuracy curve boundary recognition method(IMB-CB),which identifies boundary nodes by moving the search box,and corrects the weighting function in LBM by calculating the solid ratio of the boundary nodes,achieving accurate recognition of custom curve boundaries.In addition,curve boundary image and dot methods are utilized to verify IMB-CB.The findings revealed that IMB-CB can accurately identify the boundary,showing an error of less than 1.8%with 500 lattices.Also,the flow in the custom curve boundary and aerodynamic characteristics of the NACA0012 airfoil are calculated and compared to IBM-VC.Results showed that IMB-CB yields lower lift and drag coefficient errors than IBM-VC,with a 1.45%drag coefficient error.In addition,the characteristic curve of IMB-CB is very stable,whereas that of IBM-VC is not.For the moving boundary problem,LBM-IMB-CB with discrete element method(DEM)is capable of accurately simulating the physical phenomena of multi-moving particle flow in complex curved pipelines.This research proposes a new curve boundary recognition method,which can significantly promote the stability and accuracy of fluid-solid interaction simulations and thus has huge applications in engineering.展开更多
A large eddy simulation （LES） of the flows around an underwater vehicle model at intermediate Reynolds numbers is performed. The underwater vehicle model is taken as the DARPA SUBOFF with full appendages, where the ...A large eddy simulation （LES） of the flows around an underwater vehicle model at intermediate Reynolds numbers is performed. The underwater vehicle model is taken as the DARPA SUBOFF with full appendages, where the Reynolds number based on the hull length is 1.0x 105, An immersed boundary method based on the moving-least-squares reconstruction is used to handle the complex geometric boundaries. The adaptive mesh refinement is utilized to resolve the flows near the hull, The parallel scalabilities of the flow solver are tested on meshes with the number of cells varying from 50 million to 3.2 billion, The parallel solver reaches nearly linear scalability for the flows around the underwater vehicle model, The present simulation captures the essential features of the vortex structures near the hull and in the wake, Both of the time-averaged pressure coefficients and srreamwise velocity profiles obtained from the LES are consistent with the characteristics of the flows pass an appended axisymmetric body. The code efficiency and its correct predictions on flow features allow us to perform the full-scale simulations on tens of thousands of cores with billions of grid points for higher-Reynolds-number flows around the underwater vehicles.展开更多
The aim of this study is to develop a model of fluid and heat transfer in a biological tissue taking into account the exact structure of the related microvascular network,and to analyze the influence of structural cha...The aim of this study is to develop a model of fluid and heat transfer in a biological tissue taking into account the exact structure of the related microvascular network,and to analyze the influence of structural changes of such a network induced by diabetes.A cubic region representing local skin tissue is selected as the computational domain,which in turn includes two intravascular and extravascular sub-domains.To save computational resources,the capillary network is reduced to a 1D pipeline model and embedded into the extravascular region.On the basis of the immersed boundary method(IBM)strategy,fluid and heat fluxes across a capillary wall are distributed to the surrounding tissue nodes by a delta function.We consider both steady and periodic blood pressure conditions at the entrances of the capillary network.Under steady blood pressure conditions,both the interstitial fluid pressure and tissue temperature around the capillary network are larger than those in other places.When the periodic blood pressure condition is considered,tissue temperature tends to fluctuate with the same frequency of the forcing,but the related waveform displays a smaller amplitude and a certain time(phase)delay.When the connectivity of capillary network is diminished,the capacity of blood redistribution through the capillary network becomes weaker and a subset of the vessel branches lose blood flow,which further aggravates the amplitude attenuation and time delay of the skin temperature fluctuation.展开更多
This article introduces a numerical scheme on the basis of semi-implicit method for pressure-linked equations （SIMPLE） algorithm to simulate incompressible unsteady flows with fluid-structure interaction. The Navier...This article introduces a numerical scheme on the basis of semi-implicit method for pressure-linked equations （SIMPLE） algorithm to simulate incompressible unsteady flows with fluid-structure interaction. The Navier-Stokes equation is discretized spatially with collocated finite volume method and Eulerian implicit method in time domain. The hybrid method that combines immersed boundary method （IBM） and volume of fluid （VOF） method is used to deal with rigid body motion in fluid domain. The details of movement of immersed boundary （IB） and calculation of VOF are also described. This method can be easily applied to any existing finite-volume-based computational fluid dynamics （CFD） solver without complex operation, with which fluid flow interaction of arbitrarily complex geometry can be realized on a fixed mesh. The method is verified by low Reynolds number flows passing both stationary and oscillating cylinders. The drag and lift coefficients acquired by the study well accord with other published results, which indicate the reasonability of the proposed method.展开更多
A numerical study of vortex-induced rotations(VIRs) of an equivalent triangular cylinder, which is free to rotate in the azimuthal direction in a uniform flow, is presented. Based on an immersed boundary method, the n...A numerical study of vortex-induced rotations(VIRs) of an equivalent triangular cylinder, which is free to rotate in the azimuthal direction in a uniform flow, is presented. Based on an immersed boundary method, the numerical model is established, and is verified through the benchmark problem of flow past a freely rotating rectangular body.The computation is performed for a fixed reduced mass of m~*=2.0 and the structural stiffness and damping ratio are set to zero. The effects of Reynolds number(Re=25-180) on the characteristics of VIR are studied. It is found that the dynamic response of the triangular cylinder exhibits four distinct modes with increasing Re: a rest position,periodic rotational oscillation, random rotation and autorotation. For the rotational oscillation mode, the cylinder undergoes a periodic vibration around an equilibrium position with one side facing the incoming flow. Since the rotation effect, the outset of vortex shedding from cylinder shifts to a much lower Reynolds number. Further increase in Re leads to 2 P and P+S vortex shedding modes besides the typical 2 S pattern. Our simulation results also elucidate that the free rotation significantly changes the drag and lift forces. Inspired by these facts, the effect of free rotation on flow-induced vibration of a triangular cylinder in the in-line and transverse directions is investigated. The results show that when the translational vibration is coupled with rotation, the triangular cylinder presents a galloping response instead of vortex-induced vibration(VIV).展开更多
Simulating unsteady turbulent flow in turbomachines is still challenging due to the complexity of blade geometry and relative motion between rotor and stator.This study presents an Immersed Boundary Method(IBM)for hig...Simulating unsteady turbulent flow in turbomachines is still challenging due to the complexity of blade geometry and relative motion between rotor and stator.This study presents an Immersed Boundary Method(IBM)for high-Reynolds turbomachinery internal flows,and shows the advantage of the automatic grid generation techniques and flexible moving boundary treatments.The wall functions are used in the present method to alleviate the wall resolution restriction of turbulence simulation.The Two-Dimensional(2-D)IBM solver,which was previously developed and tested for a low-speed compressor,is further validated for a well-documented Low-Pressure Turbine(LPT)cascade.Both the blade loading and the total pressure losses in the wake are well captured by the present 2-D solver.The complex Three-Dimensional(3-D)effects in turbomachines motivate the further development of an extended 3-D IBM solver by using a curvilinear-coordinate system that facilitates the hub and casing boundary treatment.The good performance of the 3-D solver is demonstrated through comparison with CFX solver solutions for the rotor configuration of Advanced Noise Control Fan(ANCF).Further effects of the grid resolution on capturing the blade wake are discussed.The results indicate that the present 3-D solver is capable of reproducing the evolution of the blade wake with suitable computational grid.展开更多
This paper presents an improved unstructured grid immersed boundary method.The advantages of both immersed boundary method and body fitted grids which are generated by unstructured grid technology are used to enhance ...This paper presents an improved unstructured grid immersed boundary method.The advantages of both immersed boundary method and body fitted grids which are generated by unstructured grid technology are used to enhance the computation efficiency of fluid structure interaction in complex domain.The Navier-Stokes equation was discretized spacially with collocated finite volume method and Euler implicit method in time domain.The rigid body motion was simulated by immersed boundary method in which the fluid and rigid body interface interaction was dealt with VOS(volume of solid) method.A new VOS calculation method based on graph was presented in which both immersed boundary points and cross points were collected in arbitrary order to form a graph.The method is verified with flow past oscillating cylinder.展开更多
In this paper, the improved version of the meshless singular boundary method (ISBM) is developed for analyzing the hydrodynamic performance of bottom-standing submerged breakwaters in regular normally incident waves. ...In this paper, the improved version of the meshless singular boundary method (ISBM) is developed for analyzing the hydrodynamic performance of bottom-standing submerged breakwaters in regular normally incident waves. Both the single and dual prismatic breakwaters of rectangular and trapezoidal forms are examined. Only the impermeable breakwaters are considered in this study. The physical problem is cast in terms of the Laplace equation governing an irrotational flow and incompressible fluid motion with the appropriate mixed-type boundary conditions, and it is solved numerically using the ISBM. The numerical results are presented in terms of the hydrodynamic quantities of reflection and transmission coefficients. The values are first validated against the data of previous studies, computed, and discussed for a variety of structural conditions, including the height, width, and spacing of breakwater submergence. An excellent agreement is observed between the ISBM results and those of other methods. The breakwater width is found to feature marginal effects compared with the height. The present method is shown to accurately predict the resonant conditions at which the maximum reflection and transmission occur. The trapezoidal breakwaters are found to generally present a wide spectrum of reflections, suggesting that they would function better than the rectangular breakwaters. The dual breakwater systems are confirmed to perform much better than single structures.展开更多
The immersed boundary method is an effective technique for modeling and simulating fluid-structure interactions especially in the area of biomechanics.This paper analyzes the accuracy of the immersed boundary method.T...The immersed boundary method is an effective technique for modeling and simulating fluid-structure interactions especially in the area of biomechanics.This paper analyzes the accuracy of the immersed boundary method.The procedure contains two parts,i.e.,the code verification and the accuracy analysis.The code verification provides the confidence that the code used is free of mistakes,and the accuracy analysis gives the order of accuracy of the immersed boundary method.The method of manufactured solutions is taken as a means for both parts.In the first part,the numerical code employs a second-order discretization scheme,i.e.,it has second-order accuracy in theory.It matches the calculated order of accuracy obtained in the numerical calculation for all variables.This means that the code contains no mistake,which is a premise of the subsequent work.The second part introduces a jump in the manufactured solution for the pressure and adds the corresponding singular forcing terms in the momentum equations.By analyzing the discretization errors,the accuracy of the immersed boundary method is proven to be first order even though the discretization scheme is second order.It has been found that the coarser mesh may not be sensitive enough to capture the influence of the immersed boundary,and the refinement on the Lagrangian markers barely has any effect on the numerical calculation.展开更多
Currently, many studies on the local discontinuous Galerkin method focus on the Cartesian grid with low computational e ciency and poor adaptability to complex shapes. A new immersed boundary method is presented, and ...Currently, many studies on the local discontinuous Galerkin method focus on the Cartesian grid with low computational e ciency and poor adaptability to complex shapes. A new immersed boundary method is presented, and this method employs the adaptive Cartesian grid to improve the adaptability to complex shapes and the immersed boundary to increase computational e ciency. The new immersed boundary method employs different boundary cells(the physical cell and ghost cell) to impose the boundary condition and the reconstruction algorithm of the ghost cell is the key for this method. The classical model elliptic equation is used to test the method. This method is tested and analyzed from the viewpoints of boundary cell type, error distribution and accuracy. The numerical result shows that the presented method has low error and a good rate of the convergence and works well in complex geometries. The method has good prospect for practical application research of the numerical calculation research.展开更多
The embedded boundary method for solving elliptic and parabolic problems in geometrically complex domains using Cartesian meshes by Johansen and Colella （1998, J. Comput. Phys. 147, 60） has been extended for ellipti...The embedded boundary method for solving elliptic and parabolic problems in geometrically complex domains using Cartesian meshes by Johansen and Colella （1998, J. Comput. Phys. 147, 60） has been extended for elliptic and parabolic problems with interior boundaries or interfaces of discontinuities of material properties or solutions. Second order accuracy is achieved in space and time for both stationary and moving interface problems. The method is conservative for elliptic and parabolic problems with fixed interfaces. Based on this method, a front tracking algorithm for the Stefan problem has been developed. The accuracy of the method is measured through comparison with exact solution to a two-dimensional Stefan problem. The algorithm has been used for the study of melting and solidification problems.展开更多
A method combining the immersed boundary technique and a multi- relaxation-time （MRT） lattice Boltzmann flux solver （LBFS） is presented for numerical simulation of incompressible flows over circular and elliptic c...A method combining the immersed boundary technique and a multi- relaxation-time （MRT） lattice Boltzmann flux solver （LBFS） is presented for numerical simulation of incompressible flows over circular and elliptic cylinders and NACA 0012 Airfoil. The method uses a simple Cartesian mesh to simulate flows past immersed complicated bodies. With the Chapman-Enskog expansion analysis, a transform is performed between the Navier-Stokes and lattice Boltzmann equations （LBEs）. The LBFS is used to discretize the macroscopic differential equations with a finite volume method and evaluate the interface fluxes through local reconstruction of the lattice Boltzmann solution. The immersed boundary technique is used to correct the intermediate velocity around the solid boundary to satisfy the no-slip boundary condition. Agreement of simulation results with the data found in the literature shows reliability of the proposed method in simulating laminar flows on a Cartesian mesh.展开更多
An immersed body boundary method is adopted to track the motions of a towing cylinder, and a homogenous multiphase Eulerian-Eulerian fluid approach is used to capture the free surface. The Reynolds average Navier-Stoc...An immersed body boundary method is adopted to track the motions of a towing cylinder, and a homogenous multiphase Eulerian-Eulerian fluid approach is used to capture the free surface. The Reynolds average Navier-Stockes(RANS) solver is applied to all gird nodes to deal with different velocities of the nodes that are in the body boundary, near the boundary and out of the boundary and their effect on the fluid. The towing cylinder resistance at different submerged depths in the tank is presented. The simulation results are compared with the experimental data, and the method is verified and validated. Finally, the hydrodynamic characters of the cylinder are discussed further. The numerical and experimental results show that at high speeds, the deeper the cylinder submerges, the lower resistance it suffers. The resistance coefficient trough is obtained at Froude number in the range of 0.3 < F r < 0.4. These phenomena can provide some suggestions on the small waterplane area twin hull(SWATH) design.展开更多
The immersed boundary method has been widely used for simulating flows over complex geometries.However,its accuracy in predicting the statistics of near-wall turbulence has not been fully tested.In this work,we evalua...The immersed boundary method has been widely used for simulating flows over complex geometries.However,its accuracy in predicting the statistics of near-wall turbulence has not been fully tested.In this work,we evaluate the capability of the curvilinear immersed boundary(CURVIB)method in predicting near-wall velocity and pressure fluctuations in turbulent channel flows.Simulation results show that quantities including the time-averaged streamwise velocity,the rms(root-mean-square)of velocity fluctuations,the rms of vorticity fluctuations,the shear stresses,and the correlation coefficients of u'and v"computed from the CURVIB simulations are in good agreement with those from the body-fitted simulations.More importantly,it is found that the time-averaged pressure,the rms and wavenumber-frequency spectra of pressure fluctuations computed using the CURVIB method agree well with the body-fitted results.展开更多
In this paper, an efficient multigrid fictitious boundary method （MFBM） coupled with the FEM solver package FEATFLOW was used for the detailed simulation of incompressible viscous flows around one or more moving NAC...In this paper, an efficient multigrid fictitious boundary method （MFBM） coupled with the FEM solver package FEATFLOW was used for the detailed simulation of incompressible viscous flows around one or more moving NACA0012 airfoils. The calculations were carded on a fixed multigrid finite element mesh on which fluid equations were satisfied everywhere, and the airfoils were allowed to move freely through the mesh. The MFBM was employed to treat interactions between the fluid and the airfoils The motion of the airfoils was modeled by Newton-Euler equations. Numerical results of experiments verify that this method provides an efficient way to simulate incompressible viscous flows around moving airfoils.展开更多
The singular boundary method （SBM） is a recent meshless boundary collocation method that remedies the perplexing drawback of fictitious boundary in the method of fundamental solutions （MFS）. The basic idea is to u...The singular boundary method （SBM） is a recent meshless boundary collocation method that remedies the perplexing drawback of fictitious boundary in the method of fundamental solutions （MFS）. The basic idea is to use the origin intensity factor to eliminate singularity of the fundamental solution at source. The method has so far been applied successfully to the potential and elasticity problems. However, the SBM solution for large-scale problems has been hindered by the operation count of O（N^3） with direct solvers or O（N^2） with iterative solvers, as well as the memory requirement of O（N^2）. In this study, the first attempt was made to combine the fast multipole method （FMM） and the SBM to significantly reduce CPU time and memory requirement by one degree of magnitude, namely, O（N）. Based on the complex variable represen- tation of fundamental solutions, the FMM-SBM formulations for both displacement and traction were presented. Numerical examples with up to hundreds of thousands of unknowns have successfully been tested on a desktop computer. These results clearly illustrated that the proposed FMM-SBM was very efficient and promising in solving large-scale plane elasticity problems.展开更多
An iterative direct-forcing immersed boundary method is extended and used to solve convection heat transfer problems.The pressure,momentum source,and heat source at immersed boundary points are calculated simultaneous...An iterative direct-forcing immersed boundary method is extended and used to solve convection heat transfer problems.The pressure,momentum source,and heat source at immersed boundary points are calculated simultaneously to achieve the best coupling.Solutions of convection heat transfer problems with both Dirichlet and Neumann boundary conditions are presented.Two approaches for the implementation of Neumann boundary condition,i.e.direct and indirect methods,are introduced and compared in terms of accuracy and computational efficiency.Validation test cases include forced convection on a heated cylinder in an unbounded flow field and mixed convection around a circular body in a lid-driven cavity.Furthermore,the proposed method is applied to study the mixed convection around a heated rotating cylinder in a square enclosure with both iso-heat flux and iso-thermal boundary conditions.Computational results show that the order of accuracy of the indirect method is less than the direct method.However,the indirect method takes less computational time both in terms of the implementation of the boundary condition and the post processing time required to compute the heat transfer variables such as the Nusselt number.It is concluded that the iterative direct-forcing immersed boundary method is a powerful technique for the solution of convection heat transfer problems with stationary/moving boundaries and various boundary conditions.展开更多
基金partially supported by the National Natural Science Foundation of China(Nos.92271103,12202191)。
文摘The diffuse-interface immersed boundary method(IBM)possesses excellent capabilities for simulating flows around complex geometries and moving boundaries.In this method,the flow field is solved on a fixed Cartesian mesh,while the solid boundary is discretized into a series of Lagrangian points immersed in the flow field.The boundary condition is implemented by introducing a force term into the momentum equation,and the interaction between the immersed boundary and the fluid domain is achieved via an interpolation process.Over the past decades,the diffuse-interface IBM has gained popularity and spawned many variants,effectively handling a wide range of flow problems from isothermal to thermal flows,from laminar to turbulent flows,and from complex geometries to fluidstructure interaction scenarios.This paper first outlines the basic principles of the diffuse-interface IBM,then highlights recent advancements achieved by the authors’research group,and finally shows the method’s excellent numerical performance and wide applicability through several case studies involving complex moving boundary problems.
基金supported by the National Natural Science Foundation of China(Grant Nos.52301380 and 11602277).
文摘A hybrid approach based on the immersed boundary method(IBM)is developed for computation of flow-induced sound around moving bodies.In this method,a high-fidelity direct numerical simulation(DNS)solver is used to simulate the incompressible flow field.The sound field is predicted by discretizing acoustic perturbation equations(APEs)with dispersionrelation-preserving space scheme and low-dispersion and low-dissipation Runge-Kutta time integration.A sharp-interface IBM based on ghost-cell is implemented for present two-step DNS-APE approach to deal with complex moving bodies with Cartesian grids.The present method is validated through simulations of sound generation caused by flow past a rotating cylinder,an oscillating cylinder,and tandem oscillating and stationary cylinders.The sound generated by typical kinds of complicated bio-inspired locomotions,i.e.,flapping flight by wings of varied shapes and collective undulatory swimming in tandem,are investigated using present method.The results demonstrate potential of the hybrid approach in addressing flowinduced sound generation and propagation with complex moving boundaries in a fluid medium,especially for the sound characteristics of bio-mimetic flows,which might shed lights on investigations on bio-acoustics,ethology of complex animal system,and related bio-mimetic design for quietness.
基金WJD,JYZ,CLC,ZX,and ZGY were supported by the National Natural Science Foundation of China(Grant Number 51705143)the Education Department of Hunan Province(Grant Number 22B0464)the Postgraduate Scientific Research Innovation Project of Hunan Province(Grant Number QL20230249).
文摘Applying numerical simulation technology to investigate fluid-solid interaction involving complex curved bound-aries is vital in aircraft design,ocean,and construction engineering.However,current methods such as Lattice Boltzmann(LBM)and the immersion boundary method based on solid ratio(IMB)have limitations in identifying custom curved boundaries.Meanwhile,IBM based on velocity correction(IBM-VC)suffers from inaccuracies and numerical instability.Therefore,this study introduces a high-accuracy curve boundary recognition method(IMB-CB),which identifies boundary nodes by moving the search box,and corrects the weighting function in LBM by calculating the solid ratio of the boundary nodes,achieving accurate recognition of custom curve boundaries.In addition,curve boundary image and dot methods are utilized to verify IMB-CB.The findings revealed that IMB-CB can accurately identify the boundary,showing an error of less than 1.8%with 500 lattices.Also,the flow in the custom curve boundary and aerodynamic characteristics of the NACA0012 airfoil are calculated and compared to IBM-VC.Results showed that IMB-CB yields lower lift and drag coefficient errors than IBM-VC,with a 1.45%drag coefficient error.In addition,the characteristic curve of IMB-CB is very stable,whereas that of IBM-VC is not.For the moving boundary problem,LBM-IMB-CB with discrete element method(DEM)is capable of accurately simulating the physical phenomena of multi-moving particle flow in complex curved pipelines.This research proposes a new curve boundary recognition method,which can significantly promote the stability and accuracy of fluid-solid interaction simulations and thus has huge applications in engineering.
基金supported by the National Natural Science Foundation of China (11302238, 11232011. and 11572331)support from the Strategic Priority Research Program (XDB22040104)+1 种基金the Key Research Program of Frontier Sciences of the Chinese Academy of Sciences (QYZDJ-SSW-SYS002)the National Basic Research Program of China (973 Program 2013CB834100: Nonlinear science)
文摘A large eddy simulation （LES） of the flows around an underwater vehicle model at intermediate Reynolds numbers is performed. The underwater vehicle model is taken as the DARPA SUBOFF with full appendages, where the Reynolds number based on the hull length is 1.0x 105, An immersed boundary method based on the moving-least-squares reconstruction is used to handle the complex geometric boundaries. The adaptive mesh refinement is utilized to resolve the flows near the hull, The parallel scalabilities of the flow solver are tested on meshes with the number of cells varying from 50 million to 3.2 billion, The parallel solver reaches nearly linear scalability for the flows around the underwater vehicle model, The present simulation captures the essential features of the vortex structures near the hull and in the wake, Both of the time-averaged pressure coefficients and srreamwise velocity profiles obtained from the LES are consistent with the characteristics of the flows pass an appended axisymmetric body. The code efficiency and its correct predictions on flow features allow us to perform the full-scale simulations on tens of thousands of cores with billions of grid points for higher-Reynolds-number flows around the underwater vehicles.
基金This study was supported by National Natural Science Foundation of China(NSFC No.51576033)Dalian Innovative Funding of Science and Technology(2018J12SN076)NSFC No 11602053.
文摘The aim of this study is to develop a model of fluid and heat transfer in a biological tissue taking into account the exact structure of the related microvascular network,and to analyze the influence of structural changes of such a network induced by diabetes.A cubic region representing local skin tissue is selected as the computational domain,which in turn includes two intravascular and extravascular sub-domains.To save computational resources,the capillary network is reduced to a 1D pipeline model and embedded into the extravascular region.On the basis of the immersed boundary method(IBM)strategy,fluid and heat fluxes across a capillary wall are distributed to the surrounding tissue nodes by a delta function.We consider both steady and periodic blood pressure conditions at the entrances of the capillary network.Under steady blood pressure conditions,both the interstitial fluid pressure and tissue temperature around the capillary network are larger than those in other places.When the periodic blood pressure condition is considered,tissue temperature tends to fluctuate with the same frequency of the forcing,but the related waveform displays a smaller amplitude and a certain time(phase)delay.When the connectivity of capillary network is diminished,the capacity of blood redistribution through the capillary network becomes weaker and a subset of the vessel branches lose blood flow,which further aggravates the amplitude attenuation and time delay of the skin temperature fluctuation.
文摘This article introduces a numerical scheme on the basis of semi-implicit method for pressure-linked equations （SIMPLE） algorithm to simulate incompressible unsteady flows with fluid-structure interaction. The Navier-Stokes equation is discretized spatially with collocated finite volume method and Eulerian implicit method in time domain. The hybrid method that combines immersed boundary method （IBM） and volume of fluid （VOF） method is used to deal with rigid body motion in fluid domain. The details of movement of immersed boundary （IB） and calculation of VOF are also described. This method can be easily applied to any existing finite-volume-based computational fluid dynamics （CFD） solver without complex operation, with which fluid flow interaction of arbitrarily complex geometry can be realized on a fixed mesh. The method is verified by low Reynolds number flows passing both stationary and oscillating cylinders. The drag and lift coefficients acquired by the study well accord with other published results, which indicate the reasonability of the proposed method.
基金financially supported by the Fundamental Research Funds for the Central Universities(Grant Nos.2018B56414 and2019B12014)the National Natural Science Foundation of China(Grant No.51609077)
文摘A numerical study of vortex-induced rotations(VIRs) of an equivalent triangular cylinder, which is free to rotate in the azimuthal direction in a uniform flow, is presented. Based on an immersed boundary method, the numerical model is established, and is verified through the benchmark problem of flow past a freely rotating rectangular body.The computation is performed for a fixed reduced mass of m~*=2.0 and the structural stiffness and damping ratio are set to zero. The effects of Reynolds number(Re=25-180) on the characteristics of VIR are studied. It is found that the dynamic response of the triangular cylinder exhibits four distinct modes with increasing Re: a rest position,periodic rotational oscillation, random rotation and autorotation. For the rotational oscillation mode, the cylinder undergoes a periodic vibration around an equilibrium position with one side facing the incoming flow. Since the rotation effect, the outset of vortex shedding from cylinder shifts to a much lower Reynolds number. Further increase in Re leads to 2 P and P+S vortex shedding modes besides the typical 2 S pattern. Our simulation results also elucidate that the free rotation significantly changes the drag and lift forces. Inspired by these facts, the effect of free rotation on flow-induced vibration of a triangular cylinder in the in-line and transverse directions is investigated. The results show that when the translational vibration is coupled with rotation, the triangular cylinder presents a galloping response instead of vortex-induced vibration(VIV).
基金co-supported by the National Natural Science Foundation of China(No.52022009)the Science Center for Gas Turbine Project of China(No.P2022-A-II-003-001)the Key Laboratory Foundation,China(No.2021-JCJQ-LB-062-0102).
文摘Simulating unsteady turbulent flow in turbomachines is still challenging due to the complexity of blade geometry and relative motion between rotor and stator.This study presents an Immersed Boundary Method(IBM)for high-Reynolds turbomachinery internal flows,and shows the advantage of the automatic grid generation techniques and flexible moving boundary treatments.The wall functions are used in the present method to alleviate the wall resolution restriction of turbulence simulation.The Two-Dimensional(2-D)IBM solver,which was previously developed and tested for a low-speed compressor,is further validated for a well-documented Low-Pressure Turbine(LPT)cascade.Both the blade loading and the total pressure losses in the wake are well captured by the present 2-D solver.The complex Three-Dimensional(3-D)effects in turbomachines motivate the further development of an extended 3-D IBM solver by using a curvilinear-coordinate system that facilitates the hub and casing boundary treatment.The good performance of the 3-D solver is demonstrated through comparison with CFX solver solutions for the rotor configuration of Advanced Noise Control Fan(ANCF).Further effects of the grid resolution on capturing the blade wake are discussed.The results indicate that the present 3-D solver is capable of reproducing the evolution of the blade wake with suitable computational grid.
文摘This paper presents an improved unstructured grid immersed boundary method.The advantages of both immersed boundary method and body fitted grids which are generated by unstructured grid technology are used to enhance the computation efficiency of fluid structure interaction in complex domain.The Navier-Stokes equation was discretized spacially with collocated finite volume method and Euler implicit method in time domain.The rigid body motion was simulated by immersed boundary method in which the fluid and rigid body interface interaction was dealt with VOS(volume of solid) method.A new VOS calculation method based on graph was presented in which both immersed boundary points and cross points were collected in arbitrary order to form a graph.The method is verified with flow past oscillating cylinder.
基金supported by the Direction Général des Enseignements et de la Formation Supérieure of Algeria under Grant CNEPRU number G0301920140029
文摘In this paper, the improved version of the meshless singular boundary method (ISBM) is developed for analyzing the hydrodynamic performance of bottom-standing submerged breakwaters in regular normally incident waves. Both the single and dual prismatic breakwaters of rectangular and trapezoidal forms are examined. Only the impermeable breakwaters are considered in this study. The physical problem is cast in terms of the Laplace equation governing an irrotational flow and incompressible fluid motion with the appropriate mixed-type boundary conditions, and it is solved numerically using the ISBM. The numerical results are presented in terms of the hydrodynamic quantities of reflection and transmission coefficients. The values are first validated against the data of previous studies, computed, and discussed for a variety of structural conditions, including the height, width, and spacing of breakwater submergence. An excellent agreement is observed between the ISBM results and those of other methods. The breakwater width is found to feature marginal effects compared with the height. The present method is shown to accurately predict the resonant conditions at which the maximum reflection and transmission occur. The trapezoidal breakwaters are found to generally present a wide spectrum of reflections, suggesting that they would function better than the rectangular breakwaters. The dual breakwater systems are confirmed to perform much better than single structures.
基金supported by the National Natural Science Foundation of China (No 10472070)
文摘The immersed boundary method is an effective technique for modeling and simulating fluid-structure interactions especially in the area of biomechanics.This paper analyzes the accuracy of the immersed boundary method.The procedure contains two parts,i.e.,the code verification and the accuracy analysis.The code verification provides the confidence that the code used is free of mistakes,and the accuracy analysis gives the order of accuracy of the immersed boundary method.The method of manufactured solutions is taken as a means for both parts.In the first part,the numerical code employs a second-order discretization scheme,i.e.,it has second-order accuracy in theory.It matches the calculated order of accuracy obtained in the numerical calculation for all variables.This means that the code contains no mistake,which is a premise of the subsequent work.The second part introduces a jump in the manufactured solution for the pressure and adds the corresponding singular forcing terms in the momentum equations.By analyzing the discretization errors,the accuracy of the immersed boundary method is proven to be first order even though the discretization scheme is second order.It has been found that the coarser mesh may not be sensitive enough to capture the influence of the immersed boundary,and the refinement on the Lagrangian markers barely has any effect on the numerical calculation.
基金Supported by National Natural Science Foundation of China(Grant No.51405375)National Key Basic Research and Development Program of China(973 Program,Grant No.2011CB706606)
文摘Currently, many studies on the local discontinuous Galerkin method focus on the Cartesian grid with low computational e ciency and poor adaptability to complex shapes. A new immersed boundary method is presented, and this method employs the adaptive Cartesian grid to improve the adaptability to complex shapes and the immersed boundary to increase computational e ciency. The new immersed boundary method employs different boundary cells(the physical cell and ghost cell) to impose the boundary condition and the reconstruction algorithm of the ghost cell is the key for this method. The classical model elliptic equation is used to test the method. This method is tested and analyzed from the viewpoints of boundary cell type, error distribution and accuracy. The numerical result shows that the presented method has low error and a good rate of the convergence and works well in complex geometries. The method has good prospect for practical application research of the numerical calculation research.
基金supported by the U.S.Department of Energy under Contract No.DE-AC02-98CH10886 and by the State of New York
文摘The embedded boundary method for solving elliptic and parabolic problems in geometrically complex domains using Cartesian meshes by Johansen and Colella （1998, J. Comput. Phys. 147, 60） has been extended for elliptic and parabolic problems with interior boundaries or interfaces of discontinuities of material properties or solutions. Second order accuracy is achieved in space and time for both stationary and moving interface problems. The method is conservative for elliptic and parabolic problems with fixed interfaces. Based on this method, a front tracking algorithm for the Stefan problem has been developed. The accuracy of the method is measured through comparison with exact solution to a two-dimensional Stefan problem. The algorithm has been used for the study of melting and solidification problems.
文摘A method combining the immersed boundary technique and a multi- relaxation-time （MRT） lattice Boltzmann flux solver （LBFS） is presented for numerical simulation of incompressible flows over circular and elliptic cylinders and NACA 0012 Airfoil. The method uses a simple Cartesian mesh to simulate flows past immersed complicated bodies. With the Chapman-Enskog expansion analysis, a transform is performed between the Navier-Stokes and lattice Boltzmann equations （LBEs）. The LBFS is used to discretize the macroscopic differential equations with a finite volume method and evaluate the interface fluxes through local reconstruction of the lattice Boltzmann solution. The immersed boundary technique is used to correct the intermediate velocity around the solid boundary to satisfy the no-slip boundary condition. Agreement of simulation results with the data found in the literature shows reliability of the proposed method in simulating laminar flows on a Cartesian mesh.
基金Fund of State Key Laboratory of Ocean Engineering of Shanghai Jiao Tong University(No.GKZD010059-22)
文摘An immersed body boundary method is adopted to track the motions of a towing cylinder, and a homogenous multiphase Eulerian-Eulerian fluid approach is used to capture the free surface. The Reynolds average Navier-Stockes(RANS) solver is applied to all gird nodes to deal with different velocities of the nodes that are in the body boundary, near the boundary and out of the boundary and their effect on the fluid. The towing cylinder resistance at different submerged depths in the tank is presented. The simulation results are compared with the experimental data, and the method is verified and validated. Finally, the hydrodynamic characters of the cylinder are discussed further. The numerical and experimental results show that at high speeds, the deeper the cylinder submerges, the lower resistance it suffers. The resistance coefficient trough is obtained at Froude number in the range of 0.3 < F r < 0.4. These phenomena can provide some suggestions on the small waterplane area twin hull(SWATH) design.
基金This work was supported by the National Natural Science Foundation of China(NSFC)Basic Science Center Program for“Multiscale Problems in Nonlinear Mechanics”(No.11988102)the Strategic Priority Research Program,Chinese Academy of Sciences(CAS)(No.XDB22040104).
文摘The immersed boundary method has been widely used for simulating flows over complex geometries.However,its accuracy in predicting the statistics of near-wall turbulence has not been fully tested.In this work,we evaluate the capability of the curvilinear immersed boundary(CURVIB)method in predicting near-wall velocity and pressure fluctuations in turbulent channel flows.Simulation results show that quantities including the time-averaged streamwise velocity,the rms(root-mean-square)of velocity fluctuations,the rms of vorticity fluctuations,the shear stresses,and the correlation coefficients of u'and v"computed from the CURVIB simulations are in good agreement with those from the body-fitted simulations.More importantly,it is found that the time-averaged pressure,the rms and wavenumber-frequency spectra of pressure fluctuations computed using the CURVIB method agree well with the body-fitted results.
基金Supported by National 863 Plan Project of Ministry of Science and Technology of China under Grant No. 2006AA09Z354National Natural Science Foundation of China under Grant No. 10672101.
文摘In this paper, an efficient multigrid fictitious boundary method （MFBM） coupled with the FEM solver package FEATFLOW was used for the detailed simulation of incompressible viscous flows around one or more moving NACA0012 airfoils. The calculations were carded on a fixed multigrid finite element mesh on which fluid equations were satisfied everywhere, and the airfoils were allowed to move freely through the mesh. The MFBM was employed to treat interactions between the fluid and the airfoils The motion of the airfoils was modeled by Newton-Euler equations. Numerical results of experiments verify that this method provides an efficient way to simulate incompressible viscous flows around moving airfoils.
基金Project supported by the National Basic Research Program of China(973 ProjectNo.2010CB832702)+4 种基金the National Science Funds for Distinguished Young Scholars of China(No.11125208)the National Natural Science Foundation of China(Nos.11125208 and 11302069)the 111 project under Grant B12032Jiangsu Province Graduate Students Research and Innovation Plan(No.KYZZ 0138)the scholarship from the China Scholarship Council(CSC)(No.201306710026)
文摘The singular boundary method （SBM） is a recent meshless boundary collocation method that remedies the perplexing drawback of fictitious boundary in the method of fundamental solutions （MFS）. The basic idea is to use the origin intensity factor to eliminate singularity of the fundamental solution at source. The method has so far been applied successfully to the potential and elasticity problems. However, the SBM solution for large-scale problems has been hindered by the operation count of O（N^3） with direct solvers or O（N^2） with iterative solvers, as well as the memory requirement of O（N^2）. In this study, the first attempt was made to combine the fast multipole method （FMM） and the SBM to significantly reduce CPU time and memory requirement by one degree of magnitude, namely, O（N）. Based on the complex variable represen- tation of fundamental solutions, the FMM-SBM formulations for both displacement and traction were presented. Numerical examples with up to hundreds of thousands of unknowns have successfully been tested on a desktop computer. These results clearly illustrated that the proposed FMM-SBM was very efficient and promising in solving large-scale plane elasticity problems.
文摘An iterative direct-forcing immersed boundary method is extended and used to solve convection heat transfer problems.The pressure,momentum source,and heat source at immersed boundary points are calculated simultaneously to achieve the best coupling.Solutions of convection heat transfer problems with both Dirichlet and Neumann boundary conditions are presented.Two approaches for the implementation of Neumann boundary condition,i.e.direct and indirect methods,are introduced and compared in terms of accuracy and computational efficiency.Validation test cases include forced convection on a heated cylinder in an unbounded flow field and mixed convection around a circular body in a lid-driven cavity.Furthermore,the proposed method is applied to study the mixed convection around a heated rotating cylinder in a square enclosure with both iso-heat flux and iso-thermal boundary conditions.Computational results show that the order of accuracy of the indirect method is less than the direct method.However,the indirect method takes less computational time both in terms of the implementation of the boundary condition and the post processing time required to compute the heat transfer variables such as the Nusselt number.It is concluded that the iterative direct-forcing immersed boundary method is a powerful technique for the solution of convection heat transfer problems with stationary/moving boundaries and various boundary conditions.
