期刊文献+
共找到685篇文章
< 1 2 35 >
每页显示 20 50 100
Physical Experiments to Investigate the Effects of Street Bottom Heating and Inflow Turbulence on Urban Street-Canyon Flow 被引量:2
1
作者 Jae-Jin KIM Jong-Jin BAIK 《Advances in Atmospheric Sciences》 SCIE CAS CSCD 2005年第2期230-237,共8页
The effects of street bottom heating and inflow turbulence on urbanstreet-canyon flow are experimentally investigated using a circulating water channel. Threeexperiments are carried out for a street canyon with a stre... The effects of street bottom heating and inflow turbulence on urbanstreet-canyon flow are experimentally investigated using a circulating water channel. Threeexperiments are carried out for a street canyon with a street aspect ratio of 1. Results from eachexperiment with bottom heating or inflow turbulence are compared with those without bottom heatingand appreciable inflow turbulence. It is demonstrated that street bottom heating or inflowturbulence increases the intensity of the canyon vortex. A possible explanation on how street bottomheating or inflow turbulence intensifies the canyon vortex is given from a fluid dynamicalviewpoint. 展开更多
关键词 urban street-canyon flow street bottom heating inflow turbulence circulating water channel
在线阅读 下载PDF
Effects of Street-Bottom and Building-Roof Heating on Flow in Three-Dimensional Street Canyons 被引量:3
2
作者 Jae-Jin KIM Jong-Jin BAIK 《Advances in Atmospheric Sciences》 SCIE CAS CSCD 2010年第3期513-527,共15页
Using a computational fluid dynamics (CFD) model, the effects of street-bottom and building-roof heating on flow in three-dimensional street canyons are investigated. The building and street-canyon aspect ratios are... Using a computational fluid dynamics (CFD) model, the effects of street-bottom and building-roof heating on flow in three-dimensional street canyons are investigated. The building and street-canyon aspect ratios are one. In the presence of street-bottom heating, as the street-bottom heating intensity increases, the mean kinetic energy increases in the spanwise street canyon formed by the upwind and downwind buildings but decreases in the lower region of the streamwise street canyon. The increase in momentum due to buoyancy force intensifies mechanically induced flow in the spanwise street canyon. The vorticity in the spanwise street canyon strengthens. The temperature increase is not large because relatively cold above-roof-level air comes into the spanwise street canyon. In the presence of both street-bottom and building-roof heating, the mean kinetic energy rather decreases in the spanwise street canyon. This is caused by the decrease in horizontal flow speed at the roof level, which results in the weakening of the mean flow circulation in the spanwise street canyon. It is found that the vorticity in the spanwise street canyon weakens. The temperature increase is relatively large compared with that in the street-bottom heating case, because relatively warm above-roof-level air comes into the spanwise street canyon. 展开更多
关键词 street canyon flow CFD model street-bottom heating building-roof heating mean kineticenergy vorticity
在线阅读 下载PDF
A Laboratory Model for the Flow in Urban Street Canyons Induced by Bottom Heating 被引量:5
3
作者 刘辉志 梁彬 +2 位作者 朱凤荣 张伯寅 桑建国 《Advances in Atmospheric Sciences》 SCIE CAS CSCD 2003年第4期554-564,共11页
Water tank experiments are carried out to investigate the convection flow induced by bottom heating and the effects of the ambient wind on the flow in non-symmetrical urban street canyons based on the PIV (Particle Im... Water tank experiments are carried out to investigate the convection flow induced by bottom heating and the effects of the ambient wind on the flow in non-symmetrical urban street canyons based on the PIV (Particle Image Visualization) technique. Fluid experiments show that with calm ambient wind, the flows in the street canyon are completely driven by thermal force, and the convection can reach the upper atmosphere of the street canyon. Horizontal and vertical motions also appear above the roofs of the buildings. These are the conditions which favor the exchange of momentum and air mass between the street canyon and its environment. More than two vortices are induced by the convection, and the complex circulation pattern will vary with time in a wider street canyon. However, in a narrow street canyon, just one vortex appears. With a light ambient wind, the bottom heating and the associated convection result in just one main vortex. As the ambient wind speed increases, the vortex becomes more organized and its center shifts closer to the leeward building. 展开更多
关键词 flow in non-symmetrical urban street canyons bottom heating water tank
在线阅读 下载PDF
NUMERICAL SIMULATION ON FLOW AND MIXING PROCESSES IN BOTTOM BLOWN LADLES
4
作者 LI Baokuan HE Jicheng LU Zhongwu Northeast University of Technology,Shenyang,China doctor,Department of Thermal Energy Northeast University of Technology,Shenyang 110006,China 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 1993年第11期359-363,共5页
An improvement on the flow and mixing conditions in bottom blown ladles may be made by either shifting the nozzle from centre to off-centre or changing from one to two nozzles. Thus the shorter time for homogeneous mi... An improvement on the flow and mixing conditions in bottom blown ladles may be made by either shifting the nozzle from centre to off-centre or changing from one to two nozzles. Thus the shorter time for homogeneous mixing in ladle seems to be available. 展开更多
关键词 bottom blown ladle numerical simulation flow MIXING
在线阅读 下载PDF
基于Moldflow交流接触器底盖最佳浇口的研究 被引量:6
5
作者 左继红 刘丽丽 蔡颂 《塑料工业》 CAS CSCD 北大核心 2021年第1期85-88,共4页
以交流接触器底盖的浇口选型为例,利用Moldflow软件进行最佳浇口位置分析,在最佳浇口位置上设计了侧浇口注射和潜伏浇口注射两种方案,分别比较了两种方案的流动分析和翘曲分析。结果表明,流动分析侧浇口注射压力较小、剪切速率侧浇口方... 以交流接触器底盖的浇口选型为例,利用Moldflow软件进行最佳浇口位置分析,在最佳浇口位置上设计了侧浇口注射和潜伏浇口注射两种方案,分别比较了两种方案的流动分析和翘曲分析。结果表明,流动分析侧浇口注射压力较小、剪切速率侧浇口方案较小、侧浇口熔接痕数量减少;翘曲分析可知潜伏浇口总变形量虽然小于侧浇口,但是侧浇口最大变形位置在远离浇口位置的安装孔内。总体分析最佳浇口位置上设计侧浇口注射方案比较合适。 展开更多
关键词 底盖 MOLDflow软件 浇口注射 流动分析 翘曲分析
在线阅读 下载PDF
固定翼扩眼器井底流场的影响因素
6
作者 陈志 冉小丰 +1 位作者 张宗旗 徐畅 《凿岩机械气动工具》 2026年第2期70-72,共3页
当前,扩眼作业面临喷嘴角度、转速与岩屑粒径匹配性不佳引发的岩屑运移效率低的问题。构建三维数值模型,系统研究了上述参数对流场特征的影响规律。研究结果表明,当喷嘴角度为58°时,岩屑清洗效果最优;转速须与钻井液排量合理匹配;... 当前,扩眼作业面临喷嘴角度、转速与岩屑粒径匹配性不佳引发的岩屑运移效率低的问题。构建三维数值模型,系统研究了上述参数对流场特征的影响规律。研究结果表明,当喷嘴角度为58°时,岩屑清洗效果最优;转速须与钻井液排量合理匹配;大粒径岩屑在旋流场中的运移效率更高。研究成果为固定翼扩眼器水力结构优化提供了理论依据,为提高深井扩眼作业效率提供了参考。 展开更多
关键词 固定翼扩眼器 井底流场 数值模拟
在线阅读 下载PDF
L形隔墩鱼道水力特性数值模拟研究
7
作者 孙靖康 郭超 祝龙 《水运工程》 2026年第1期138-145,共8页
针对鱼道中因不良流态导致的鱼类上溯效率低下的问题,提出L形隔墩鱼道这一新型鱼道形式,通过数值模拟的方法,对鱼道内的水流条件展开研究。结果表明:L形隔墩鱼道中主流位置居中,水流流态平顺,主流两侧存在大小相近且稳定的回流区,回流... 针对鱼道中因不良流态导致的鱼类上溯效率低下的问题,提出L形隔墩鱼道这一新型鱼道形式,通过数值模拟的方法,对鱼道内的水流条件展开研究。结果表明:L形隔墩鱼道中主流位置居中,水流流态平顺,主流两侧存在大小相近且稳定的回流区,回流区中部流速最小。主流宽度0.45 m,与L形隔墩竖缝相当,并且各水层的水力特性基本一致。鱼道最大平均流速随底坡的降低而降低,当底坡从1/70降至1/90时,鱼道最大流速从1.06 m/s降低至0.91 m/s,降幅达到16.5%。当底坡低于1/80时,主流区紊动能保持在0.05 m2/s2,池室内部的紊动能基本均小于0.05 m2/s2,低紊动能区域面积占比超过70%。该研究可为鱼道工程提供量化的设计参数,结合设计规范的要求,鱼道底坡坡度采用1/80及以下时能够满足鱼类上溯需求。 展开更多
关键词 L形隔墩鱼道 水流流态 底坡 紊动能 数值模拟
在线阅读 下载PDF
基于Moldflow塑料插座底板的模流分析 被引量:3
8
作者 王波 《新技术新工艺》 2016年第3期32-33,共2页
以插座底板为例,应用Moldflow软件对插座底板的塑件最佳浇口位置进行分析,并进行浇注系统设计和冷却系统设计。应用Moldflow软件对插座底板进行模流分析,重点对充填、流动的整个注射过程和塑件的翘曲变形进行了分析。通过分析,找出了注... 以插座底板为例,应用Moldflow软件对插座底板的塑件最佳浇口位置进行分析,并进行浇注系统设计和冷却系统设计。应用Moldflow软件对插座底板进行模流分析,重点对充填、流动的整个注射过程和塑件的翘曲变形进行了分析。通过分析,找出了注射和成型过程中存在的问题以及出现的缺陷,以便于确定最佳工艺参数。采用该方法可以大大提高模具的设计效率,提高塑件的质量,缩短产品生产周期,有效地节约成本。 展开更多
关键词 MOLDflow 注射 模流分析 插座底板
在线阅读 下载PDF
突扩跌坎式掺气减蚀设施水力特性研究
9
作者 赵歆萌 刘亚坤 +1 位作者 张帝 卢洋亮 《中国农村水利水电》 北大核心 2026年第3期134-139,147,共7页
针对高水头、大流量的泄洪洞有压段出口易出现空化空蚀问题,依托长度比尺为1∶50的物理模型试验对窄缝消能的突扩跌坎式掺气设施水力特性进行研究;并借助Fluent软件探究不同体型参数下的水力特性规律,数值模拟采取VOF多相流模型、RNG k... 针对高水头、大流量的泄洪洞有压段出口易出现空化空蚀问题,依托长度比尺为1∶50的物理模型试验对窄缝消能的突扩跌坎式掺气设施水力特性进行研究;并借助Fluent软件探究不同体型参数下的水力特性规律,数值模拟采取VOF多相流模型、RNG k-ε湍流模型、PISO速度压力耦合方程,得出的流量、水面线、流速和时均压强分布与试验实测值最大误差低于10%,可满足工程精度要求。进一步深入研究发现:随着闸门开度减小、出口窄缝宽度增加,侧壁对水流约束降低,纵向拉伸减弱,空腔长度、净空腔长度及净空腔高度均有所增加,且高水位下的各项空腔水力学指标增加趋势大于低水位;其他条件不变时,空腔回水相比射流落点对窄缝收缩比的变化更敏感;随着侧壁由对称收缩逐渐偏转至单侧收缩,最长射流落点位置不变,由侧壁中心逐渐偏转至不收缩侧,且净空腔高度保持不变;采取增大窄缝收缩比及底板坡度的方法可较好解决空腔回水问题。该研究有助于明晰采用窄缝消能的泄洪洞掺气减蚀设施的三维水力学特性,可为相关工程掺气减蚀设计提供借鉴。 展开更多
关键词 高速水流 掺气减蚀 突扩跌坎 空腔回水 窄缝消能
在线阅读 下载PDF
EFFECTS OF VARYING BOTTOM ON NONLINEAR SURFACE WAVES 被引量:1
10
作者 吴正人 程友良 +1 位作者 王松岭 吕玉坤 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 2006年第3期409-416,共8页
The resonant flow of an incompressible, inviscid fluid with surface tension on varying bottoms was researched. The effects of different bottoms on the nonlinear surface waves were analyzed. The waterfall plots of the ... The resonant flow of an incompressible, inviscid fluid with surface tension on varying bottoms was researched. The effects of different bottoms on the nonlinear surface waves were analyzed. The waterfall plots of the wave were drawn with Matlab according to the numerical simulation of the fKdV equation with the pseudo-spectral method. From the waterfall plots, the results are obtained as follows: for the convex bottom, the waves system can be viewed as a combination of the effects of forward-step forcing and backwardstep forcing, and these two wave systems respectively radiate upstream and downstream without mutual interaction. Nevertheless, the result for the concave bottom is contrary to the convex one. For some combined bottoms, the wave systems can be considered as the combination of positive forcing and negative forcing. 展开更多
关键词 variation bottom resonant flow solitary wave fKdV equation pseudospectral method waterfall plot
在线阅读 下载PDF
150 t顶底复吹转炉冶炼工艺参数优化的物理模拟
11
作者 肖丙政 张广洪 +2 位作者 武豪 江雪婷 邓爱军 《江西冶金》 2026年第1期77-86,共10页
本研究以某钢铁企业大型顶底复吹转炉为研究对象,采用相似比为1∶5的物理模型,系统研究了底吹流量、顶吹供氧强度、氧枪枪位及氧枪喷孔偏角等因素对熔池内钢液混匀时间与流场状态的影响。结果表明,当底吹流量由400 Nm^(3)/h增至464 Nm^(... 本研究以某钢铁企业大型顶底复吹转炉为研究对象,采用相似比为1∶5的物理模型,系统研究了底吹流量、顶吹供氧强度、氧枪枪位及氧枪喷孔偏角等因素对熔池内钢液混匀时间与流场状态的影响。结果表明,当底吹流量由400 Nm^(3)/h增至464 Nm^(3)/h时,混匀时间由80.4 s降至64.5 s,钢液裸露面积增大,此时钢液流场达到最佳状态;在保证同等冶炼效果和经济效益的前提下,当顶吹氧枪喷孔偏角为15°、顶吹流量为38000 Nm^(3)/h时,综合指标相对较好,1750 mm枪位下混匀时间可降至100.4 s,渣面波动稳定性显著改善;采用顶底复吹优化方案(氧枪偏角为15°、底吹流量为464 Nm^(3)/h)混匀时间可缩短至51.9 s,钢液裸露面积显著增大。工业验证数据表明,采用此优化方案可使低碳低磷钢渣全铁(TFe)含量由19.18%降至18.41%,终点氧含量由6.655×10^(-4)降至6.084×10^(-4);普碳钢渣TFe含量由15.3%降至14.8%,终点氧含量由7.032×10^(-4)降至6.885×10^(-4)。建议在实际生产中采用此优化参数组合,并根据具体钢种和炉型特征对氧枪与底吹参数进行精准调控,以实现转炉冶炼效率与钢液质量的协同提升。 展开更多
关键词 顶底复吹转炉 物理模型 供氧强度 混匀时间 流场
在线阅读 下载PDF
Application of Radial Basis Function Learning Algorithm in Petroleum Engineering: Bottom-Hole Pressure Prediction 被引量:1
12
作者 Mehdi Mohammadpoor Farshid Torabi 《材料科学与工程(中英文A版)》 2011年第4X期586-591,共6页
关键词 径向基函数神经网络 压力预测 石油工程 井底压力 学习算法 垂直多相流 RBFNN 应用
在线阅读 下载PDF
Short wave stability of homogeneous shear flows with variable topography
13
作者 窦华书 V.GANESH 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 2014年第5期541-548,共8页
For the stability problem of homogeneous shear flows in sea straits of arbitrary cross section, a sufficient condition for stability is derived under the condition of inviscid flow. It is shown that there is a critica... For the stability problem of homogeneous shear flows in sea straits of arbitrary cross section, a sufficient condition for stability is derived under the condition of inviscid flow. It is shown that there is a critical wave number, and if the wave number of a normal mode is greater than this critical wave number, the mode is stable. 展开更多
关键词 hydrodynamic stability shear flow variable bottom sea strait
在线阅读 下载PDF
基于DPM-VOF耦合的高铅渣底吹还原炉内多相流动数值模拟 被引量:1
14
作者 闫红杰 黄正宗 +2 位作者 郝澳 夏韬 刘柳 《中国有色金属学报》 北大核心 2025年第2期607-620,共14页
高铅渣底吹还原炉内天然气-熔体或载气-熔体-煤粉构成的多相体系复杂行为与熔炼效率和系统产能紧密相关。本文基于DPM-VOF耦合模型,研究了工业尺度的高铅渣底吹还原炉内分别以天然气和煤粉为还原剂的气-液两相流和气-液-固多相流复杂行... 高铅渣底吹还原炉内天然气-熔体或载气-熔体-煤粉构成的多相体系复杂行为与熔炼效率和系统产能紧密相关。本文基于DPM-VOF耦合模型,研究了工业尺度的高铅渣底吹还原炉内分别以天然气和煤粉为还原剂的气-液两相流和气-液-固多相流复杂行为。结果表明:天然气作还原剂时,炉膛两端熔体流速平缓,喷枪区域流速剧烈,呈“脉冲状”分布;喷枪附近压力呈两侧大、中间小的“V”字形分布;喷枪区域压力波动剧烈,虽可强化气液搅拌过程但易造成喷枪损坏和熔体喷溅。采用煤粉作还原剂时,煤粉从喷枪喷出后最初分布在气团内部和气液交界面处,随后扩散至熔池中上部和烟气区域;熔池内煤粉分布在0.25~0.85 m深度范围;喷枪附近煤粉浓度相近,均未出现沉积现象。 展开更多
关键词 底吹还原炉 多相流 DPM-VOF模型 数值模拟 直接炼铅工艺
在线阅读 下载PDF
基于改进SSA-BPNN的煤层气直井井底流压预测研究
15
作者 余洋 董银涛 +3 位作者 李云波 包宇 张立侠 孙浩 《油气藏评价与开发》 北大核心 2025年第2期250-256,共7页
煤层气资源广泛应用直井开发,采用控压控水的排采制度,井底流压是排采方案设计与设备选型的重要参数,因此,煤层气直井井底流压预测具有重要的意义。为了便捷、准确地预测煤层气直井井底流压,指导煤层气井的控压排采,引入机器学习领域中... 煤层气资源广泛应用直井开发,采用控压控水的排采制度,井底流压是排采方案设计与设备选型的重要参数,因此,煤层气直井井底流压预测具有重要的意义。为了便捷、准确地预测煤层气直井井底流压,指导煤层气井的控压排采,引入机器学习领域中的反向传播神经网络(BPNN)模型,同时对麻雀搜索算法(SSA)进行改进,耦合构建基于改进麻雀搜索算法-反向传播神经网络(SSA-BPNN)的煤层气直井井底流压预测模型。选取了生产现场常规测量的5个影响井底流压的参数作为井底流压预测模型的输入参数,相对应的井底流压数值作为井底流压预测模型的输出参数。将600组实测数据划分为训练集、验证集与测试集,完成了煤层气直井井底流压预测模型的建立与校验工作。BPNN模型与改进SSA-BPNN模型的验证集平均绝对百分比误差分别为3.10%与0.53%,可以看出利用改进SSA与BPNN的耦合建模,能够解决BPNN易陷于局部最优的问题,提高了煤层气直井井底流压的预测精度。同时将改进SSA-BPNN模型与遗传算法-支持向量回归机(GA-SVR)模型和物理模型解析方法进行对比,结果显示:3种不同模型的平均绝对百分比误差分别为1.318%、4.971%、18.156%,改进SSA-BPNN模型的误差最低,且在井底流压较低时,改进SSA-BPNN模型的预测精度显著提高,展现出较高的准确性与良好的适用性。改进SSA-BPNN模型仅需5个输入参数,减少了输入与计算参数的复杂度,且无须考虑井筒内流体分布情况,可覆盖排采各阶段,在不同压力区间都有较高准确性。 展开更多
关键词 煤层气 麻雀搜索算法 神经网络 井底流压 预测模型
在线阅读 下载PDF
底吹对环缝-孔氧枪炼钢转炉混匀效率影响的数值模拟
16
作者 李超 闫浩炜 +4 位作者 田勇 于海岐 郭鹏越 安希忠 张浩 《钢铁》 北大核心 2025年第7期242-250,共9页
采用数值模拟方法系统研究了新型“环缝-孔”氧枪在顶底复吹转炉中的熔池混合效率及流场动力学特性。重点探讨了底吹气泡羽流与顶吹射流的相互作用机制及其对熔池流动和混合行为的影响。研究结果表明,与传统氧枪相比,新型氧枪设计有效... 采用数值模拟方法系统研究了新型“环缝-孔”氧枪在顶底复吹转炉中的熔池混合效率及流场动力学特性。重点探讨了底吹气泡羽流与顶吹射流的相互作用机制及其对熔池流动和混合行为的影响。研究结果表明,与传统氧枪相比,新型氧枪设计有效解决了熔池中心区域的低速死区问题。在顶底复吹协同作用下,熔池流动速率显著提高,物质传递效率得到明显改善。研究发现,底吹工艺参数对熔池流场具有重要调控作用。当底吹速度由8 m/s增加至20 m/s时,熔池湍流强度增强,涡流中心逐渐向外迁移。此外,底吹气泡羽流与顶吹射流之间的相互作用会改变射流的冲击面积和穿透深度,进而优化熔池流场分布,提高混合效率。在顶吹流量比为全喷嘴顶吹、1∶24及1∶17时,随着底吹速度的增加,混匀时间逐渐减小。然而,当顶吹流量比为1∶12时,底吹气泡羽流与汇聚射流之间的干涉会导致动能耗散,反而削弱搅拌效率的提升效果。基于上述研究,优化氧枪结构及顶底复吹工艺参数可有效提升熔池混合效率,降低能耗与碳排放,实现冶金过程的降本增效。该研究有助于推动钢铁行业技术创新,提升生产效率和产品质量,为实现钢铁行业的可持续发展提供有力支持,同时为钢铁行业实施极致能效工程、探索绿色低碳转型路径提供了重要的理论支撑和技术指导。 展开更多
关键词 顶底复吹转炉 “环缝-孔”氧枪 混匀效率 数值模拟 氧枪射流 多相流模型 底吹强度 熔池流动特性
原文传递
The Geothermal Regime in Sirt Basin, Libya: The Geological Role and Heat Flow Studies
17
作者 Ahmed Al-Rashed Fouad Shaaban Ahmed Yousef 《International Journal of Geosciences》 2019年第1期57-79,共23页
Bottom hole temperatures (BHTs) and static formation temperatures (DSTs) of 70 deep exploratory wells are used to evaluate the geothermal regime in the northeastern part of Sirt Basin. A linear regression was derived ... Bottom hole temperatures (BHTs) and static formation temperatures (DSTs) of 70 deep exploratory wells are used to evaluate the geothermal regime in the northeastern part of Sirt Basin. A linear regression was derived between the BHT’s and the DST’s, for correcting the bottom hole temperatures from the drilling factors that lower them from the true formation temperatures. The geothermal gradients were calculated using the corrected BHT’s and the heat flow has been estimated. Interpretation of the geothermal data, utilizing subsurface maps and isothermal geologic cross section, revealed a shallow, local semi-thermal reservoir of Oligo-Miocene age (at depths 1000 m). The geothermal gradients and heat flow values of this reservoir are ranging from 40 - >60°C/Km and from 80 up to >130 mW/m2, respectively. At deeper depths (>1000 m until the maximum depth of investigation), the area has more or less moderate to low geothermal gradients that range from 40 to 2. The study indicates that the vertical and the lateral variations of the formation temperatures, geothermal gradients and the heat flow values are controlled by the structural, groundwater movements as well as lithological and thermal characteristics of the subsurface sequence. 展开更多
关键词 GEOTHERMAL Reservoir bottom Hole TEMPERATURES Static Formation TEMPERATURES Heat flow SIRT BASIN
暂未订购
底部导流板结构对高速列车气动减阻特性影响研究
18
作者 武振锋 周洋 +1 位作者 安乐 刘万露 《北京交通大学学报》 北大核心 2025年第2期157-165,共9页
为降低高速列车转向架区域的气动阻力,提出3种不同结构的导流板设计方案,通过对列车底部的气流进行合理引流,进而实现节能降耗的目的.数值模拟采用基于SST k-ω模型的改进的延迟分离涡方法(Improved Delayed Detached Eddy Simulation,I... 为降低高速列车转向架区域的气动阻力,提出3种不同结构的导流板设计方案,通过对列车底部的气流进行合理引流,进而实现节能降耗的目的.数值模拟采用基于SST k-ω模型的改进的延迟分离涡方法(Improved Delayed Detached Eddy Simulation,IDDES),对安装不同结构导流板的高速列车气动减阻效果进行对比研究,并分析导流板对列车底部转向架区域流场和尾涡的影响.研究结果表明:安装导流板后,虽然列车车体阻力增大,但转向架自身气动阻力大幅降低;因导流板的引流作用,列车底部空气流速变缓,转向架突出部件受气流冲击程度减弱;转向架区域的正压面积大幅减小,前后压力差变小是转向架自身气动阻力降低的主要原因;当列车以350 km/h速度运行时,与原型车相比,模型Ⅰ、模型Ⅱ和模型Ⅲ的整车减阻率分别为8.1%,9.8%和12.1%;受导流板的影响,3种列车模型尾部三维涡旋结构均出现变化,尾车鼻尖附近的湍动能强度也呈现出降低的趋势,说明尾涡对列车的拖拽效果减弱,进而降低了高速列车的气动阻力. 展开更多
关键词 高速列车 底部导流板 气动阻力 流场结构 数值模拟
在线阅读 下载PDF
高水头弧形闸门出口侧墙空化特性及掺气减蚀研究
19
作者 王伟 邓军 卫望汝 《工程科学与技术》 北大核心 2025年第2期84-92,共9页
高水头泄洪放空洞弧形闸门出口往往需要设置掺气设施以减免高速水流空化空蚀破坏。由于有压出口区域水流流态与结构壁面相互作用复杂,易导致掺气减蚀保护失效,目前,其核心水力致灾原因尚不明确,并且制约着适用于弧形闸门掺气减蚀的技术... 高水头泄洪放空洞弧形闸门出口往往需要设置掺气设施以减免高速水流空化空蚀破坏。由于有压出口区域水流流态与结构壁面相互作用复杂,易导致掺气减蚀保护失效,目前,其核心水力致灾原因尚不明确,并且制约着适用于弧形闸门掺气减蚀的技术研发。本文结合实际工程中高水头弧形闸门出口侧墙空蚀破坏实例,采用水力学模型试验与数值模拟方法,对空蚀破坏的水力学成因进行系统分析,并提出了掺气减蚀水力设计方案。结果表明,弧形闸门泄流运行时,高速水流横向扩散显著,侧空腔掺气效果较差,在侧向附壁过程中形成侧墙冲击-低压反射区,导致附壁区水流空化数较低,并存在侧墙清水区域,二者共同作用导致泄洪放空洞侧墙发生空化空蚀破坏,这种不利影响在大流量、闸门局开条件下更为严重。基于提高侧墙水流空化数与改善侧掺气空腔掺气效果,提出了侧墙二级收缩掺气坎,实现低压空蚀风险区域水流脱壁,末端侧向水流附壁全断面掺气减蚀。研究成果将为弧形闸门出口掺气减蚀水力设计提供科学依据,保障高水头泄洪建筑物的安全运行。 展开更多
关键词 高速水流 弧形闸门 空蚀破坏 掺气减蚀 泄洪洞
在线阅读 下载PDF
均匀流作用下坐底式养殖网箱的水动力特性研究 被引量:1
20
作者 吉健 周利兰 +1 位作者 刘斌 徐磊 《华中科技大学学报(自然科学版)》 北大核心 2025年第7期151-157,共7页
通过数值模拟与模型实验相结合的方法,对使用双层网衣的坐底式养殖网箱进行了研究.数值模拟中基于多孔介质方法将网衣简化为多孔介质板,将管架处理为刚性壁面,结合Realizable k-ε湍流模型计算了不同流速、来流方向及缺失网衣等情况下... 通过数值模拟与模型实验相结合的方法,对使用双层网衣的坐底式养殖网箱进行了研究.数值模拟中基于多孔介质方法将网衣简化为多孔介质板,将管架处理为刚性壁面,结合Realizable k-ε湍流模型计算了不同流速、来流方向及缺失网衣等情况下网箱流场的变化情况,并与水池实验结果进行了对比分析.结果表明:数值计算结果与实验结果有较好的一致性,双层网衣对流速的衰减效果明显,流速在网箱附近会急剧变化,并在网箱下游形成一个低速区;侧网的存在会加快中间立柱的尾涡脱落,而底网对流速的影响较小;来流方向变化对网箱流速分布的影响较大.工程应用中网箱管架尺寸不宜过大以避免尾涡对结构的潜在影响. 展开更多
关键词 多孔介质 坐底式养殖网箱 流场 网衣 流速衰减
原文传递
上一页 1 2 35 下一页 到第
使用帮助 返回顶部