In the paper, firstly, based on new non-tensor-product-typed partially inverse divided differences algorithms in a recursive form, scattered data interpolating schemes are constructed via bivariate continued fractions...In the paper, firstly, based on new non-tensor-product-typed partially inverse divided differences algorithms in a recursive form, scattered data interpolating schemes are constructed via bivariate continued fractions with odd and even nodes, respectively. And equivalent identities are also obtained between interpolated functions and bivariate continued fractions. Secondly, by means of three-term recurrence relations for continued fractions, the characterization theorem is presented to study on the degrees of the numerators and denominators of the interpolating continued fractions. Thirdly, some numerical examples show it feasible for the novel recursive schemes. Meanwhile, compared with the degrees of the numera- tors and denominators of bivariate Thiele-typed interpolating continued fractions, those of the new bivariate interpolating continued fractions are much low, respectively, due to the reduc- tion of redundant interpolating nodes. Finally, the operation count for the rational function interpolation is smaller than that for radial basis function interpolation.展开更多
A new method for the construction of bivariate matrix valued rational interpolants (BGIRI) on a rectangular grid is presented in [6]. The rational interpolants are of Thiele-type continued fraction form with scalar de...A new method for the construction of bivariate matrix valued rational interpolants (BGIRI) on a rectangular grid is presented in [6]. The rational interpolants are of Thiele-type continued fraction form with scalar denominator. The generalized inverse introduced by [3]is gen-eralized to rectangular matrix case in this paper. An exact error formula for interpolation is ob-tained, which is an extension in matrix form of bivariate scalar and vector valued rational interpola-tion discussed by Siemaszko[l2] and by Gu Chuangqing [7] respectively. By defining row and col-umn-transformation in the sense of the partial inverted differences for matrices, two type matrix algorithms are established to construct corresponding two different BGIRI, which hold for the vec-tor case and the scalar case.展开更多
Both the expansive Newton's interpolating polynomial and the Thiele-Werner's in- terpolation are used to construct a kind of bivariate blending Thiele-Werner's oscula- tory rational interpolation.A recursi...Both the expansive Newton's interpolating polynomial and the Thiele-Werner's in- terpolation are used to construct a kind of bivariate blending Thiele-Werner's oscula- tory rational interpolation.A recursive algorithm and its characteristic properties are given.An error estimation is obtained and a numerical example is illustrated.展开更多
The bivariate interpolation in two dimensional space R2 is more complicated than that in one dimensional space R, because there is no Haar space of continuous functions in R2. Therefore, the bivariate interpolation ha...The bivariate interpolation in two dimensional space R2 is more complicated than that in one dimensional space R, because there is no Haar space of continuous functions in R2. Therefore, the bivariate interpolation has not a unique solution for a set of arbitrary distinct pairwise points. In this work, we suggest a type of basis which depends on the points such that the bivariate interpolation has the unique solution for any set of distinct pairwise points. In this case, the matrix of bivariate interpolation has the semi inherited factorization.展开更多
Extending the results of [4] in the univariate case, in this paper we prove that the bivariate interpolation polynomials of Hermite-Fejér based on the Chebyshev nodes of the first kind, those of Lagrange based o...Extending the results of [4] in the univariate case, in this paper we prove that the bivariate interpolation polynomials of Hermite-Fejér based on the Chebyshev nodes of the first kind, those of Lagrange based on the Chebyshev nodes of second kind and ±1, and those of bivariate Shepard operators, have the property of partial preservation of global smoothness, with respect to various bivariate moduli of continuity.展开更多
The solvability of the interpolation by bivariate polynomials based on multivariate F-truncated powers is considered in this short note. It unifies the pointwise Lagrange interpolation by bivariate polynomials and the...The solvability of the interpolation by bivariate polynomials based on multivariate F-truncated powers is considered in this short note. It unifies the pointwise Lagrange interpolation by bivariate polynomials and the interpolation by bivariate polynomials based on linear integrals over segments in some sense.展开更多
In this paper, an interpolating method for bivariate cubic splines with C2-join on type-II triangular at a rectangular domain is given, and the approximation degree, inter- polating existence and uniqueness of the cub...In this paper, an interpolating method for bivariate cubic splines with C2-join on type-II triangular at a rectangular domain is given, and the approximation degree, inter- polating existence and uniqueness of the cubic splines are studied.展开更多
This paper constructs a new kind of block based bivariate blending rational interpolation via symmetric branched continued fractions. The construction process may be outlined as follows. The first step is to divide th...This paper constructs a new kind of block based bivariate blending rational interpolation via symmetric branched continued fractions. The construction process may be outlined as follows. The first step is to divide the original set of support points into some subsets (blocks). Then construct each block by using symmetric branched continued fraction. Finally assemble these blocks by Newton’s method to shape the whole interpolation scheme. Our new method offers many flexible bivariate blending rational interpolation schemes which include the classical bivariate Newton’s polynomial interpolation and symmetric branched continued fraction interpolation as its special cases. The block based bivariate blending rational interpolation is in fact a kind of tradeoff between the purely linear interpolation and the purely nonlinear interpolation. Finally, numerical examples are given to show the effectiveness of the proposed method.展开更多
In this paper,we propose a method to deal with numerical integral by using two kinds of C^2 quasi-interpolation operators on the bivariate spline space,and also dis- cuss the convergence properties and error estimates...In this paper,we propose a method to deal with numerical integral by using two kinds of C^2 quasi-interpolation operators on the bivariate spline space,and also dis- cuss the convergence properties and error estimates.Moreover,the proposed method is applied to the numerical evaluation of 2-D singular integrals.Numerical exper- iments will be carried out and the results will be compared with some previously published results.展开更多
Purpose–This research aims to monitor seismic intensity along railway lines,study methods for calculating the extent of earthquake impact on railways and address practical challenges in estimating intensity distribut...Purpose–This research aims to monitor seismic intensity along railway lines,study methods for calculating the extent of earthquake impact on railways and address practical challenges in estimating intensity distribution along railway routes,thereby achieving graded post-earthquake response measures.Design/methodology/approach–The seismic intensity monitoring system for railways adopts a two-level architecture,namely the seismic intensity monitoring equipment and the seismic intensity rapid reporting information center processing platform.The platform obtains measured instrumental intensity through the seismic intensity monitoring equipment deployed along railways and combines it with the National Seismic Network Earthquake Catalog to generate real-time railway seismic intensity distribution maps using the Kriging interpolation algorithm.A calculation method for railway seismic impact intervals is designed to calculate the mileage intervals where the intensity area corresponding to each contour line in the seismic intensity distribution map intersects with the railway line.Findings–The system was deployed for practical earthquake monitoring demonstration applications on the Nanjiang Railway Line in Xinjiang.During the operational period,the seismic intensity monitoring equipment calculated and uploaded instrumental intensity values to the seismic intensity rapid reporting information center processing platform a total of nine times.Among these,earthquakes triggering the Kriging interpolation algorithm occurred twice.The system operated stably throughout the application period and successfully visualized relevant seismic impact data,such as earthquake intensity distribution maps and affected railway mileage sections.These results validate the system’s practicality and effectiveness.Originality/value–The seismic intensity monitoring for the railway system designed in this study can integrate the measured instrumental intensity data along railways and the earthquake catalog of the National Seismic Network.It uses the Kriging interpolation method to calculate the intensity distribution and determine the seismic impact scope,thereby addressing the issue that the seismic intensity distribution calculated by traditional attenuation formulas deviates from reality.The system can provide clear graded interval recommendations for post-earthquake disposal,effectively improve the efficiency of post-earthquake recovery and inspection and offer a decision-making basis for restoring railway operations quickly.展开更多
With the rapid expansion of multimedia data,protecting digital information has become increasingly critical.Reversible data hiding offers an effective solution by allowing sensitive information to be embedded in multi...With the rapid expansion of multimedia data,protecting digital information has become increasingly critical.Reversible data hiding offers an effective solution by allowing sensitive information to be embedded in multimedia files while enabling full recovery of the original data after extraction.Audio,as a vital medium in communication,entertainment,and information sharing,demands the same level of security as images.However,embedding data in encrypted audio poses unique challenges due to the trade-offs between security,data integrity,and embedding capacity.This paper presents a novel interpolation-based reversible data hiding algorithm for encrypted audio that achieves scalable embedding capacity.By increasing sample density through interpolation,embedding opportunities are significantly enhanced while maintaining encryption throughout the process.The method further integrates multiple most significant bit(multi-MSB)prediction and Huffman coding to optimize compression and embedding efficiency.Experimental results on standard audio datasets demonstrate the proposed algorithm’s ability to embed up to 12.47 bits per sample with over 9.26 bits per sample available for pure embedding capacity,while preserving full reversibility.These results confirm the method’s suitability for secure applications that demand high embedding capacity and perfect reconstruction of original audio.This work advances reversible data hiding in encrypted audio by offering a secure,efficient,and fully reversible data hiding framework.展开更多
Blended acquisition offers efficiency improvements over conventional seismic data acquisition, at the cost of introducing blending noise effects. Besides, seismic data often suffers from irregularly missing shots caus...Blended acquisition offers efficiency improvements over conventional seismic data acquisition, at the cost of introducing blending noise effects. Besides, seismic data often suffers from irregularly missing shots caused by artificial or natural effects during blended acquisition. Therefore, blending noise attenuation and missing shots reconstruction are essential for providing high-quality seismic data for further seismic processing and interpretation. The iterative shrinkage thresholding algorithm can help obtain deblended data based on sparsity assumptions of complete unblended data, and it characterizes seismic data linearly. Supervised learning algorithms can effectively capture the nonlinear relationship between incomplete pseudo-deblended data and complete unblended data. However, the dependence on complete unblended labels limits their practicality in field applications. Consequently, a self-supervised algorithm is presented for simultaneous deblending and interpolation of incomplete blended data, which minimizes the difference between simulated and observed incomplete pseudo-deblended data. The used blind-trace U-Net (BTU-Net) prevents identity mapping during complete unblended data estimation. Furthermore, a multistep process with blending noise simulation-subtraction and missing traces reconstruction-insertion is used in each step to improve the deblending and interpolation performance. Experiments with synthetic and field incomplete blended data demonstrate the effectiveness of the multistep self-supervised BTU-Net algorithm.展开更多
Data hiding methods involve embedding secret messages into cover objects to enable covert communication in a way that is difficult to detect.In data hiding methods based on image interpolation,the image size is reduce...Data hiding methods involve embedding secret messages into cover objects to enable covert communication in a way that is difficult to detect.In data hiding methods based on image interpolation,the image size is reduced and then enlarged through interpolation,followed by the embedding of secret data into the newly generated pixels.A general improving approach for embedding secret messages is proposed.The approach may be regarded a general model for enhancing the data embedding capacity of various existing image interpolation-based data hiding methods.This enhancement is achieved by expanding the range of pixel values available for embedding secret messages,removing the limitations of many existing methods,where the range is restricted to powers of two to facilitate the direct embedding of bit-based messages.This improvement is accomplished through the application of multiple-based number conversion to the secret message data.The method converts the message bits into a multiple-based number and uses an algorithm to embed each digit of this number into an individual pixel,thereby enhancing the message embedding efficiency,as proved by a theorem derived in this study.The proposed improvement method has been tested through experiments on three well-known image interpolation-based data hiding methods.The results show that the proposed method can enhance the three data embedding rates by approximately 14%,13%,and 10%,respectively,create stego-images with good quality,and resist RS steganalysis attacks.These experimental results indicate that the use of the multiple-based number conversion technique to improve the three interpolation-based methods for embedding secret messages increases the number of message bits embedded in the images.For many image interpolation-based data hiding methods,which use power-of-two pixel-value ranges for message embedding,other than the three tested ones,the proposed improvement method is also expected to be effective for enhancing their data embedding capabilities.展开更多
A joint statistical model of wind speed and wind shear is critical for height-dependent wind resource characteristic analysis.However,given the different atmospheric conditions that may be involved,the statistical dis...A joint statistical model of wind speed and wind shear is critical for height-dependent wind resource characteristic analysis.However,given the different atmospheric conditions that may be involved,the statistical distribution of the two variables may show multimodal characteristics.In this work,a finite mixture bivariate statistical model was designed to describe the statistical properties,which is composed of several components,each with a Weibull distribution and a normal distribution for wind speed and wind shear,respectively,with a Gaussian copula to describe the dependency structure between the two variables.To confirm the developed model,reanalysis data from six positions in the coastal sea areas of China were used.Our results disclosed that the developed joint statistical model can accurately capture the different multimodal structures presented in all the bivariate samples under mixed atmospheric conditions,giving acceptable predictions of the joint probability distributions.Proper consideration of wind shear coefficient variation is crucial in estimating height-dependent wind resource characteristics.Importantly,unlike traditional methods that are limited to specific hub heights,the model developed here can estimate wind energy potential across different hub heights,enhancing the economic viability assessment of wind power projects.展开更多
Ocean observations are inherently characterized by irregular temporal and spatial distributions,as well as heterogeneous spatial resolutions and error characteristics arising from the use of diverse observational plat...Ocean observations are inherently characterized by irregular temporal and spatial distributions,as well as heterogeneous spatial resolutions and error characteristics arising from the use of diverse observational platforms and techniques.To enable their application across a broad range of scientific and practical problems,it is essential to map these heterogeneous datasets into temporally and spatially consistent gridded products.Optimal Interpolation remains the most widely adopted algorithm for the mapping of oceanographic data.Two principal implementations of the optimal interpolation algorithm are commonly employed.The first,known as the basic optimal interpolation,is derived from the theory of optimal estimation and involves computationally intensive matrix operations,posing significant challenges when applied to high-dimensional problems.The second,referred to as the point-wise optimal interpolation,reduces computational complexity through point-wise estimation,thereby circumventing high-dimensional operations;however,this approach results in a substantially higher overall computational cost.In this study,a novel optimal interpolation algorithm is proposed that utilizes the Kronecker product to approximate the background error covariance matrix.This formulation enables the decomposition of high-dimensional matrix operations into smaller,computationally tractable sub-problems,thereby improving the scalability of optimal interpolation for large spatial domains with dense observational coverage.Building upon this framework,a multi-scale optimal interpolation method is further developed to enhance the integration of observational datasets with widely varying spatial resolutions,thereby improving the accuracy and applicability of the resulting gridded products.展开更多
Curved beams with complex geometries are vital in numerous engineering applications,where precise vibration analysis is crucial for ensuring safe and effective designs.Traditional finite element methods(FEMs) often st...Curved beams with complex geometries are vital in numerous engineering applications,where precise vibration analysis is crucial for ensuring safe and effective designs.Traditional finite element methods(FEMs) often struggle to accurately represent the dynamic characteristics of these structures due to the limitations in their shape function approximations.To overcome this challenge,the current study introduces an innovative finite element(FE)-based technique for the undamped vibrational analysis of curved beams with arbitrary curvature,employing explicitly derived interpolation functions.Initially,the exact interpolation functions are developed for circular are elements with the force method.These functions facilitate the creation of a highly accurate stiffness matrix,which is validated against the benchmark examples.To accommodate arbitrary curvature,a systematic transformation technique is established to approximate the intricate curves with a series of circular arcs.The numerical findings indicate that increasing the number of arc segments enhances accuracy,approaching the exact solutions.The analysis of free vibrations is conducted for both circular and non-circular beams.Mass matrices are derived using two methods:lumped mass and consistent mass,where the latter is based on the interpolation functions.The effectiveness of the proposed method is confirmed through the comparisons with the existing literature,demonstrating strong agreement.Finally,several practical cases involving beams with diverse curvature profiles are analyzed.Both natural frequencies and mode shapes are determined,providing significant insights into the dynamic behavior of these structures.This research offers a dependable and efficient analytical framework for the vibrational analysis of complex curved beams,with promising implications for structural and mechanical engineering.展开更多
Emergency medical services (EMS) are a vital element of the public healthcare system in China,^([1])providing an opportunity to respond to critical medical conditions and save people’s lives.^([2])The accessibility o...Emergency medical services (EMS) are a vital element of the public healthcare system in China,^([1])providing an opportunity to respond to critical medical conditions and save people’s lives.^([2])The accessibility of EMS has received considerable attention in health and transport geography studies.^([3])One of the optimal gauges for evaluating the accessibility of EMS is the response time,which is defined as the time from receiving an emergency call to the arrival of an ambulance.^([4])Beijing has already reduced the response time to approximately12 min,and the next goal is to ensure that the response time across Beijing does not exceed 12 min (the information comes from the Beijing Emergency Medical Center).展开更多
A novel suppression method of the phase noise is proposed to reduce the negative impacts of phase noise in coherent optical orthogonal frequency division multiplexing(CO-OFDM)systems.The method integrates the sub-symb...A novel suppression method of the phase noise is proposed to reduce the negative impacts of phase noise in coherent optical orthogonal frequency division multiplexing(CO-OFDM)systems.The method integrates the sub-symbol second-order polynomial interpolation(SSPI)with cubature Kalman filter(CKF)to improve the precision and effectiveness of the data processing through using a three-stage processing approach of phase noise.First of all,the phase noise values in OFDM symbols are calculated by using pilot symbols.Then,second-order Newton interpolation(SNI)is used in second-order interpolation to acquire precise noise estimation.Afterwards,every OFDM symbol is partitioned into several sub-symbols,and second-order polynomial interpolation(SPI)is utilized in the time domain to enhance suppression accuracy and time resolution.Ultimately,CKF is employed to suppress the residual phase noise.The simulation results show that this method significantly suppresses the impact of the phase noise on the system,and the error floors can be decreased at the condition of 16 quadrature amplitude modulation(16QAM)and 32QAM.The proposed method can greatly improve the CO-OFDM system's ability to tolerate the wider laser linewidth.This method,compared to the linear interpolation sub-symbol common phase error compensation(LI-SCPEC)and Lagrange interpolation and extended Kalman filter(LRI-EKF)algorithms,has superior suppression effect.展开更多
In order to get the spatial grid data of monthly precipitation and monthly average temperature of Sanjiangyuan area, the Co-Kriging (COK) and thin plate smoothing splines(TPS) interpolation methods were applied by usi...In order to get the spatial grid data of monthly precipitation and monthly average temperature of Sanjiangyuan area, the Co-Kriging (COK) and thin plate smoothing splines(TPS) interpolation methods were applied by using the climate data during 1971-2000 of 58 meteorological stations around Qinghai Province and the 3 arc-second digital elevation model (DEM) data. The performance was evaluated by the smallest statistical errors by general cross validation (GCV). Root-mean-squared predicted errors (RMSE) and mean absolute errors (MAE) were used to compare the performance of the two methods. The results showed that: 1) After combing covariates into the models, both methods performed better; 2) The performance of TPS was significantly better than COK: for monthly average temperature, the RMSE derived from TPS was 69.48% higher than COK, as MAE increased by 70.56%. And for monthly precipitation, the RMSE derived from TPS was 28.07% higher than COK, as MAE increased by 29.06%.展开更多
基金Supported by the Special Funds Tianyuan for the National Natural Science Foundation of China(Grant No.11426086)the Fundamental Research Funds for the Central Universities(Grant No.2016B08714)the Natural Science Foundation of Jiangsu Province for the Youth(Grant No.BK20160853)
文摘In the paper, firstly, based on new non-tensor-product-typed partially inverse divided differences algorithms in a recursive form, scattered data interpolating schemes are constructed via bivariate continued fractions with odd and even nodes, respectively. And equivalent identities are also obtained between interpolated functions and bivariate continued fractions. Secondly, by means of three-term recurrence relations for continued fractions, the characterization theorem is presented to study on the degrees of the numerators and denominators of the interpolating continued fractions. Thirdly, some numerical examples show it feasible for the novel recursive schemes. Meanwhile, compared with the degrees of the numera- tors and denominators of bivariate Thiele-typed interpolating continued fractions, those of the new bivariate interpolating continued fractions are much low, respectively, due to the reduc- tion of redundant interpolating nodes. Finally, the operation count for the rational function interpolation is smaller than that for radial basis function interpolation.
文摘A new method for the construction of bivariate matrix valued rational interpolants (BGIRI) on a rectangular grid is presented in [6]. The rational interpolants are of Thiele-type continued fraction form with scalar denominator. The generalized inverse introduced by [3]is gen-eralized to rectangular matrix case in this paper. An exact error formula for interpolation is ob-tained, which is an extension in matrix form of bivariate scalar and vector valued rational interpola-tion discussed by Siemaszko[l2] and by Gu Chuangqing [7] respectively. By defining row and col-umn-transformation in the sense of the partial inverted differences for matrices, two type matrix algorithms are established to construct corresponding two different BGIRI, which hold for the vec-tor case and the scalar case.
基金This project was supported by the National Natural Science Foundation of China （No. 60473114）.
文摘Both the expansive Newton's interpolating polynomial and the Thiele-Werner's in- terpolation are used to construct a kind of bivariate blending Thiele-Werner's oscula- tory rational interpolation.A recursive algorithm and its characteristic properties are given.An error estimation is obtained and a numerical example is illustrated.
文摘The bivariate interpolation in two dimensional space R2 is more complicated than that in one dimensional space R, because there is no Haar space of continuous functions in R2. Therefore, the bivariate interpolation has not a unique solution for a set of arbitrary distinct pairwise points. In this work, we suggest a type of basis which depends on the points such that the bivariate interpolation has the unique solution for any set of distinct pairwise points. In this case, the matrix of bivariate interpolation has the semi inherited factorization.
文摘Extending the results of [4] in the univariate case, in this paper we prove that the bivariate interpolation polynomials of Hermite-Fejér based on the Chebyshev nodes of the first kind, those of Lagrange based on the Chebyshev nodes of second kind and ±1, and those of bivariate Shepard operators, have the property of partial preservation of global smoothness, with respect to various bivariate moduli of continuity.
文摘The solvability of the interpolation by bivariate polynomials based on multivariate F-truncated powers is considered in this short note. It unifies the pointwise Lagrange interpolation by bivariate polynomials and the interpolation by bivariate polynomials based on linear integrals over segments in some sense.
文摘In this paper, an interpolating method for bivariate cubic splines with C2-join on type-II triangular at a rectangular domain is given, and the approximation degree, inter- polating existence and uniqueness of the cubic splines are studied.
基金Project supported by the National Natural Science Foundation of China (No. 10171026, No. 60473114) the AnhuiProvincial Natural Science Foundation, China (No. 03046102)the Research Funds for Young InnovationGroup, Education Department of Anhui Province (No. 2005TD03).
文摘This paper constructs a new kind of block based bivariate blending rational interpolation via symmetric branched continued fractions. The construction process may be outlined as follows. The first step is to divide the original set of support points into some subsets (blocks). Then construct each block by using symmetric branched continued fraction. Finally assemble these blocks by Newton’s method to shape the whole interpolation scheme. Our new method offers many flexible bivariate blending rational interpolation schemes which include the classical bivariate Newton’s polynomial interpolation and symmetric branched continued fraction interpolation as its special cases. The block based bivariate blending rational interpolation is in fact a kind of tradeoff between the purely linear interpolation and the purely nonlinear interpolation. Finally, numerical examples are given to show the effectiveness of the proposed method.
基金This project was supported by the National Natural Science Foundation of China （No. 60373093, No. 60533060）.
文摘In this paper,we propose a method to deal with numerical integral by using two kinds of C^2 quasi-interpolation operators on the bivariate spline space,and also dis- cuss the convergence properties and error estimates.Moreover,the proposed method is applied to the numerical evaluation of 2-D singular integrals.Numerical exper- iments will be carried out and the results will be compared with some previously published results.
基金funded by the Research and Development Fund Project of China Academy of Railway Science Group Co.,Ltd.,(No:2023YJ259)the Science and Technology Research and Development Program Project of China State Railway Group Co.,Ltd.(No:J2024G008).
文摘Purpose–This research aims to monitor seismic intensity along railway lines,study methods for calculating the extent of earthquake impact on railways and address practical challenges in estimating intensity distribution along railway routes,thereby achieving graded post-earthquake response measures.Design/methodology/approach–The seismic intensity monitoring system for railways adopts a two-level architecture,namely the seismic intensity monitoring equipment and the seismic intensity rapid reporting information center processing platform.The platform obtains measured instrumental intensity through the seismic intensity monitoring equipment deployed along railways and combines it with the National Seismic Network Earthquake Catalog to generate real-time railway seismic intensity distribution maps using the Kriging interpolation algorithm.A calculation method for railway seismic impact intervals is designed to calculate the mileage intervals where the intensity area corresponding to each contour line in the seismic intensity distribution map intersects with the railway line.Findings–The system was deployed for practical earthquake monitoring demonstration applications on the Nanjiang Railway Line in Xinjiang.During the operational period,the seismic intensity monitoring equipment calculated and uploaded instrumental intensity values to the seismic intensity rapid reporting information center processing platform a total of nine times.Among these,earthquakes triggering the Kriging interpolation algorithm occurred twice.The system operated stably throughout the application period and successfully visualized relevant seismic impact data,such as earthquake intensity distribution maps and affected railway mileage sections.These results validate the system’s practicality and effectiveness.Originality/value–The seismic intensity monitoring for the railway system designed in this study can integrate the measured instrumental intensity data along railways and the earthquake catalog of the National Seismic Network.It uses the Kriging interpolation method to calculate the intensity distribution and determine the seismic impact scope,thereby addressing the issue that the seismic intensity distribution calculated by traditional attenuation formulas deviates from reality.The system can provide clear graded interval recommendations for post-earthquake disposal,effectively improve the efficiency of post-earthquake recovery and inspection and offer a decision-making basis for restoring railway operations quickly.
基金funded by theNational Science and Technology Council of Taiwan under the grant number NSTC 113-2221-E-035-058.
文摘With the rapid expansion of multimedia data,protecting digital information has become increasingly critical.Reversible data hiding offers an effective solution by allowing sensitive information to be embedded in multimedia files while enabling full recovery of the original data after extraction.Audio,as a vital medium in communication,entertainment,and information sharing,demands the same level of security as images.However,embedding data in encrypted audio poses unique challenges due to the trade-offs between security,data integrity,and embedding capacity.This paper presents a novel interpolation-based reversible data hiding algorithm for encrypted audio that achieves scalable embedding capacity.By increasing sample density through interpolation,embedding opportunities are significantly enhanced while maintaining encryption throughout the process.The method further integrates multiple most significant bit(multi-MSB)prediction and Huffman coding to optimize compression and embedding efficiency.Experimental results on standard audio datasets demonstrate the proposed algorithm’s ability to embed up to 12.47 bits per sample with over 9.26 bits per sample available for pure embedding capacity,while preserving full reversibility.These results confirm the method’s suitability for secure applications that demand high embedding capacity and perfect reconstruction of original audio.This work advances reversible data hiding in encrypted audio by offering a secure,efficient,and fully reversible data hiding framework.
基金supported by the National Natural Science Foundation of China(42374134,42304125,U20B6005)the Science and Technology Commission of Shanghai Municipality(23JC1400502)the Fundamental Research Funds for the Central Universities.
文摘Blended acquisition offers efficiency improvements over conventional seismic data acquisition, at the cost of introducing blending noise effects. Besides, seismic data often suffers from irregularly missing shots caused by artificial or natural effects during blended acquisition. Therefore, blending noise attenuation and missing shots reconstruction are essential for providing high-quality seismic data for further seismic processing and interpretation. The iterative shrinkage thresholding algorithm can help obtain deblended data based on sparsity assumptions of complete unblended data, and it characterizes seismic data linearly. Supervised learning algorithms can effectively capture the nonlinear relationship between incomplete pseudo-deblended data and complete unblended data. However, the dependence on complete unblended labels limits their practicality in field applications. Consequently, a self-supervised algorithm is presented for simultaneous deblending and interpolation of incomplete blended data, which minimizes the difference between simulated and observed incomplete pseudo-deblended data. The used blind-trace U-Net (BTU-Net) prevents identity mapping during complete unblended data estimation. Furthermore, a multistep process with blending noise simulation-subtraction and missing traces reconstruction-insertion is used in each step to improve the deblending and interpolation performance. Experiments with synthetic and field incomplete blended data demonstrate the effectiveness of the multistep self-supervised BTU-Net algorithm.
文摘Data hiding methods involve embedding secret messages into cover objects to enable covert communication in a way that is difficult to detect.In data hiding methods based on image interpolation,the image size is reduced and then enlarged through interpolation,followed by the embedding of secret data into the newly generated pixels.A general improving approach for embedding secret messages is proposed.The approach may be regarded a general model for enhancing the data embedding capacity of various existing image interpolation-based data hiding methods.This enhancement is achieved by expanding the range of pixel values available for embedding secret messages,removing the limitations of many existing methods,where the range is restricted to powers of two to facilitate the direct embedding of bit-based messages.This improvement is accomplished through the application of multiple-based number conversion to the secret message data.The method converts the message bits into a multiple-based number and uses an algorithm to embed each digit of this number into an individual pixel,thereby enhancing the message embedding efficiency,as proved by a theorem derived in this study.The proposed improvement method has been tested through experiments on three well-known image interpolation-based data hiding methods.The results show that the proposed method can enhance the three data embedding rates by approximately 14%,13%,and 10%,respectively,create stego-images with good quality,and resist RS steganalysis attacks.These experimental results indicate that the use of the multiple-based number conversion technique to improve the three interpolation-based methods for embedding secret messages increases the number of message bits embedded in the images.For many image interpolation-based data hiding methods,which use power-of-two pixel-value ranges for message embedding,other than the three tested ones,the proposed improvement method is also expected to be effective for enhancing their data embedding capabilities.
基金supported by the Key R&D Program of Shandong Province,China(No.2021ZLGX04)the National Natural Science Foundation of China(No.52171284)。
文摘A joint statistical model of wind speed and wind shear is critical for height-dependent wind resource characteristic analysis.However,given the different atmospheric conditions that may be involved,the statistical distribution of the two variables may show multimodal characteristics.In this work,a finite mixture bivariate statistical model was designed to describe the statistical properties,which is composed of several components,each with a Weibull distribution and a normal distribution for wind speed and wind shear,respectively,with a Gaussian copula to describe the dependency structure between the two variables.To confirm the developed model,reanalysis data from six positions in the coastal sea areas of China were used.Our results disclosed that the developed joint statistical model can accurately capture the different multimodal structures presented in all the bivariate samples under mixed atmospheric conditions,giving acceptable predictions of the joint probability distributions.Proper consideration of wind shear coefficient variation is crucial in estimating height-dependent wind resource characteristics.Importantly,unlike traditional methods that are limited to specific hub heights,the model developed here can estimate wind energy potential across different hub heights,enhancing the economic viability assessment of wind power projects.
基金The National Key Research and Development Program of China under contract No.2022YFF0801404.
文摘Ocean observations are inherently characterized by irregular temporal and spatial distributions,as well as heterogeneous spatial resolutions and error characteristics arising from the use of diverse observational platforms and techniques.To enable their application across a broad range of scientific and practical problems,it is essential to map these heterogeneous datasets into temporally and spatially consistent gridded products.Optimal Interpolation remains the most widely adopted algorithm for the mapping of oceanographic data.Two principal implementations of the optimal interpolation algorithm are commonly employed.The first,known as the basic optimal interpolation,is derived from the theory of optimal estimation and involves computationally intensive matrix operations,posing significant challenges when applied to high-dimensional problems.The second,referred to as the point-wise optimal interpolation,reduces computational complexity through point-wise estimation,thereby circumventing high-dimensional operations;however,this approach results in a substantially higher overall computational cost.In this study,a novel optimal interpolation algorithm is proposed that utilizes the Kronecker product to approximate the background error covariance matrix.This formulation enables the decomposition of high-dimensional matrix operations into smaller,computationally tractable sub-problems,thereby improving the scalability of optimal interpolation for large spatial domains with dense observational coverage.Building upon this framework,a multi-scale optimal interpolation method is further developed to enhance the integration of observational datasets with widely varying spatial resolutions,thereby improving the accuracy and applicability of the resulting gridded products.
文摘Curved beams with complex geometries are vital in numerous engineering applications,where precise vibration analysis is crucial for ensuring safe and effective designs.Traditional finite element methods(FEMs) often struggle to accurately represent the dynamic characteristics of these structures due to the limitations in their shape function approximations.To overcome this challenge,the current study introduces an innovative finite element(FE)-based technique for the undamped vibrational analysis of curved beams with arbitrary curvature,employing explicitly derived interpolation functions.Initially,the exact interpolation functions are developed for circular are elements with the force method.These functions facilitate the creation of a highly accurate stiffness matrix,which is validated against the benchmark examples.To accommodate arbitrary curvature,a systematic transformation technique is established to approximate the intricate curves with a series of circular arcs.The numerical findings indicate that increasing the number of arc segments enhances accuracy,approaching the exact solutions.The analysis of free vibrations is conducted for both circular and non-circular beams.Mass matrices are derived using two methods:lumped mass and consistent mass,where the latter is based on the interpolation functions.The effectiveness of the proposed method is confirmed through the comparisons with the existing literature,demonstrating strong agreement.Finally,several practical cases involving beams with diverse curvature profiles are analyzed.Both natural frequencies and mode shapes are determined,providing significant insights into the dynamic behavior of these structures.This research offers a dependable and efficient analytical framework for the vibrational analysis of complex curved beams,with promising implications for structural and mechanical engineering.
基金supported by National Key Research & Development Program of China (2022YFC3006201)。
文摘Emergency medical services (EMS) are a vital element of the public healthcare system in China,^([1])providing an opportunity to respond to critical medical conditions and save people’s lives.^([2])The accessibility of EMS has received considerable attention in health and transport geography studies.^([3])One of the optimal gauges for evaluating the accessibility of EMS is the response time,which is defined as the time from receiving an emergency call to the arrival of an ambulance.^([4])Beijing has already reduced the response time to approximately12 min,and the next goal is to ensure that the response time across Beijing does not exceed 12 min (the information comes from the Beijing Emergency Medical Center).
基金supported by the National Natural Science Foundation of China(Nos.U21A20447 and 61971079)。
文摘A novel suppression method of the phase noise is proposed to reduce the negative impacts of phase noise in coherent optical orthogonal frequency division multiplexing(CO-OFDM)systems.The method integrates the sub-symbol second-order polynomial interpolation(SSPI)with cubature Kalman filter(CKF)to improve the precision and effectiveness of the data processing through using a three-stage processing approach of phase noise.First of all,the phase noise values in OFDM symbols are calculated by using pilot symbols.Then,second-order Newton interpolation(SNI)is used in second-order interpolation to acquire precise noise estimation.Afterwards,every OFDM symbol is partitioned into several sub-symbols,and second-order polynomial interpolation(SPI)is utilized in the time domain to enhance suppression accuracy and time resolution.Ultimately,CKF is employed to suppress the residual phase noise.The simulation results show that this method significantly suppresses the impact of the phase noise on the system,and the error floors can be decreased at the condition of 16 quadrature amplitude modulation(16QAM)and 32QAM.The proposed method can greatly improve the CO-OFDM system's ability to tolerate the wider laser linewidth.This method,compared to the linear interpolation sub-symbol common phase error compensation(LI-SCPEC)and Lagrange interpolation and extended Kalman filter(LRI-EKF)algorithms,has superior suppression effect.
基金Supported by Forestry Science and Technology Support Project (2008BADB0B0203)National Technology Support Project (2007BAC03A08-5)
文摘In order to get the spatial grid data of monthly precipitation and monthly average temperature of Sanjiangyuan area, the Co-Kriging (COK) and thin plate smoothing splines(TPS) interpolation methods were applied by using the climate data during 1971-2000 of 58 meteorological stations around Qinghai Province and the 3 arc-second digital elevation model (DEM) data. The performance was evaluated by the smallest statistical errors by general cross validation (GCV). Root-mean-squared predicted errors (RMSE) and mean absolute errors (MAE) were used to compare the performance of the two methods. The results showed that: 1) After combing covariates into the models, both methods performed better; 2) The performance of TPS was significantly better than COK: for monthly average temperature, the RMSE derived from TPS was 69.48% higher than COK, as MAE increased by 70.56%. And for monthly precipitation, the RMSE derived from TPS was 28.07% higher than COK, as MAE increased by 29.06%.
