The relation between diffractive beam parameters and normalized frequency is analyzed that leads to two improved Tormulas for two kinds of mode-field halT-widths and several formulas for divergence angle as well as be...The relation between diffractive beam parameters and normalized frequency is analyzed that leads to two improved Tormulas for two kinds of mode-field halT-widths and several formulas for divergence angle as well as beam propagation factor. The numerical calculation indicates that the maximal relative error is less than 0.5% within a reasonable parameter range.展开更多
An optimized setup for fiber optic injection of a kilowatt peak power laser diode stack emitting in the SWIR spectral range is proposed. Starting from a fast axis collimated (FAC) and slow axis collimated (SAC) 15 bar...An optimized setup for fiber optic injection of a kilowatt peak power laser diode stack emitting in the SWIR spectral range is proposed. Starting from a fast axis collimated (FAC) and slow axis collimated (SAC) 15 bars, 19 emitters off the shelf laser diode stack, the beam is transformed using spatial beam combining and polarization coupling. Both techniques integrated in a compact design enable to couple the kilowatt level beam into a standard 600 μm core, 0.22 numerical aperture (NA) multimode optical fiber. An application in the field of long range SWIR laser illuminator for gated viewing is presented. A comparison between two illuminators is realized both based on the same laser diode stack but one using beam parameter product (BPP) reduction and one without. It could be demonstrated that BPP reduction is the best way for efficient, narrow divergence and compact semi-conductor based laser illuminators design and realization. The global laser illuminator efficiency could be improved by 75% for the narrowest divergences thanks to this approach.展开更多
Purpose The physics design of the High Energy Photon Source(HEPS)was finished after many times of iteration.Hereby,the typical equilibrium electron beam parameters corresponding to the proposed two baseline operation ...Purpose The physics design of the High Energy Photon Source(HEPS)was finished after many times of iteration.Hereby,the typical equilibrium electron beam parameters corresponding to the proposed two baseline operation modes in the baseline design of HEPS are presented.Methods To compute the equilibrium parameters of the electron beam,the lattice parameters,RF parameters,and the parameters of the insertion devices(IDs)were determined first.Furthermore,it is more precise to use the full-current electron beam parameters in the estimations of the performance of the synchrotron light.Therefore,not only the single-particle dynamics but also the current-dependent collective effects need to be considered in the computations of the full-current,equilibrium parameters of the electron beam.Both analytic computations and multi-particle tracking simulations were carried out.Results The full-current,equilibrium parameters of the electron beams in the HEPS storage ring are presented in this paper.Moreover,the main beam parameters in the injector(the booster and the LINAC),corresponding to the two baseline operation modes of the storage ring,are also presented.Conclusion The typical electron beam parameters corresponding to the two baseline operation modes are given in detail in this paper.展开更多
The irradiance of an elliptic Gaussian beam that is high enough to excite high-order nonlinear refraction effect is used to calculate the normalized on-axis transmittance function in the z-scan technique by introducin...The irradiance of an elliptic Gaussian beam that is high enough to excite high-order nonlinear refraction effect is used to calculate the normalized on-axis transmittance function in the z-scan technique by introducing complex beam parameters which make the calculation simpler. The transmittance formula is applied to the first-, first two-, and first three-order nonlinearities. Numerical evaluation shows that the symmetry no longer holds when using an elliptic Gaussian beam instead of a circular Gaussian beam. A distortion is observed in the central part of the curve, which decreases as ellipticity increases. Moreover, the variation of the normalized peak-valley difference decreases as ellipticity decreases.展开更多
Aiming at the approximate error of commonly used methods on calculation of hydrostatic pressures of closed hydrostatic guideways with multiple pockets, a more accurate solution is proposed. Taking design of beam ＆ sl...Aiming at the approximate error of commonly used methods on calculation of hydrostatic pressures of closed hydrostatic guideways with multiple pockets, a more accurate solution is proposed. Taking design of beam ＆ slide-rest guideways for a heavy duty CNC vertical turning mill as an example, under an assumption that stiffnesses of guideways and their jointing structure are sufficiently large, the pressures of the pockets can be attained by adding a co-planarity equation that constrains pocket centers. Then, an optimization model is built to minimize the highest pocket pressure under additional constraints that are posed on the highest seal margin pressure, the highest levitating pressure of the pockets, and the maximum deformation of the guideways. The optimization problem is solved sequentially by using the methods of design of experiments and adaptive simulated annealing on iSIGHT software platform. The results show significant improvements to the original design. Optimized maximum hydrostatic pressure meets the requirement of hydraulic system.展开更多
Particle accelerators are devices used for research in scientific problems such as high energy and nuclear physics.In a particle accelerator, the shape of particle beam envelope is changed dynamically along the forwar...Particle accelerators are devices used for research in scientific problems such as high energy and nuclear physics.In a particle accelerator, the shape of particle beam envelope is changed dynamically along the forward direction. Thus, this reference direction can be considered as an auxiliary "time" beam axis. In this paper, the optimal beam matching control problem for a low energy transport system in a charged particle accelerator is considered. The beam matching procedure is formulated as a finite "time" dynamic optimization problem, in which the Kapchinsky-Vladimirsky(K-V) coupled envelope equations model beam dynamics. The aim is to drive any arbitrary initial beam state to a prescribed target state, as well as to track reference trajectory as closely as possible, through the control of the lens focusing strengths in the beam matching channel. We first apply the control parameterization method to optimize lens focusing strengths, and then combine this with the time-scaling transformation technique to further optimize the drift and lens length in the beam matching channel. The exact gradients of the cost function with respect to the decision parameters are computed explicitly through the state sensitivity-based analysis method. Finally, numerical simulations are illustrated to verify the effectiveness of the proposed approach.展开更多
A large-area high-power radio-frequency（RF） driven ion source was developed for positive and negative neutral beam injectors at the Korea Atomic Energy Research Institute（KAERI）. The RF ion source consists of a dr...A large-area high-power radio-frequency（RF） driven ion source was developed for positive and negative neutral beam injectors at the Korea Atomic Energy Research Institute（KAERI）. The RF ion source consists of a driver region, including a helical antenna and a discharge chamber, and an expansion region. RF power can be transferred at up to 10 kW with a fixed frequency of 2 MHz through an optimized RF matching system. An actively water-cooled Faraday shield is located inside the driver region of the ion source for the stable and steady-state operations of high-power RF discharge. Plasma ignition of the ion source is initiated by the injection of argongas without a starter-filament heating, and the argon-gas is then slowly exchanged by the injection of hydrogen-gas to produce pure hydrogen plasmas. The uniformities of the plasma parameter,such as a plasma density and an electron temperature, are measured at the lowest area of the driver region using two RF-compensated electrostatic probes along the direction of the shortand long-dimensions of the driver region. The plasma parameters will be compared with those obtained at the lowest area of the expansion bucket to analyze the plasma expansion properties from the driver region to the expansion region.展开更多
在汽车仪表板横梁(Cross Car Beam,CCB)的设计开发初始阶段,选取一些设计参数作为设计变量,利用SFE建立针对这些变量的参数化模型,选取适当的DOE正交矩阵列表输出参数化模型.使用Kriging方法构建性能结果的响应面近似模型,通过主效应和...在汽车仪表板横梁(Cross Car Beam,CCB)的设计开发初始阶段,选取一些设计参数作为设计变量,利用SFE建立针对这些变量的参数化模型,选取适当的DOE正交矩阵列表输出参数化模型.使用Kriging方法构建性能结果的响应面近似模型,通过主效应和贡献量的对比分析发现圆管梁的直径和壁厚是最关键的设计变量,为仪表板横梁的设计提供指导.借助Isight优化算法在整个样本空间中寻找最优结构设计并进行虚拟仿真验证,从而得到最优的实际产品结构.展开更多
基金Supported by the Program of Fujian Education Department under Grant No. JB09069the Natural Science Fund of Fujian Province under Grant No. 2009J01275
文摘The relation between diffractive beam parameters and normalized frequency is analyzed that leads to two improved Tormulas for two kinds of mode-field halT-widths and several formulas for divergence angle as well as beam propagation factor. The numerical calculation indicates that the maximal relative error is less than 0.5% within a reasonable parameter range.
文摘An optimized setup for fiber optic injection of a kilowatt peak power laser diode stack emitting in the SWIR spectral range is proposed. Starting from a fast axis collimated (FAC) and slow axis collimated (SAC) 15 bars, 19 emitters off the shelf laser diode stack, the beam is transformed using spatial beam combining and polarization coupling. Both techniques integrated in a compact design enable to couple the kilowatt level beam into a standard 600 μm core, 0.22 numerical aperture (NA) multimode optical fiber. An application in the field of long range SWIR laser illuminator for gated viewing is presented. A comparison between two illuminators is realized both based on the same laser diode stack but one using beam parameter product (BPP) reduction and one without. It could be demonstrated that BPP reduction is the best way for efficient, narrow divergence and compact semi-conductor based laser illuminators design and realization. The global laser illuminator efficiency could be improved by 75% for the narrowest divergences thanks to this approach.
基金supported by the High Energy Photon Source(HEPS),a major national science and technology infrastructurethe National Natural Science Foundation of China(No.11922512).
文摘Purpose The physics design of the High Energy Photon Source(HEPS)was finished after many times of iteration.Hereby,the typical equilibrium electron beam parameters corresponding to the proposed two baseline operation modes in the baseline design of HEPS are presented.Methods To compute the equilibrium parameters of the electron beam,the lattice parameters,RF parameters,and the parameters of the insertion devices(IDs)were determined first.Furthermore,it is more precise to use the full-current electron beam parameters in the estimations of the performance of the synchrotron light.Therefore,not only the single-particle dynamics but also the current-dependent collective effects need to be considered in the computations of the full-current,equilibrium parameters of the electron beam.Both analytic computations and multi-particle tracking simulations were carried out.Results The full-current,equilibrium parameters of the electron beams in the HEPS storage ring are presented in this paper.Moreover,the main beam parameters in the injector(the booster and the LINAC),corresponding to the two baseline operation modes of the storage ring,are also presented.Conclusion The typical electron beam parameters corresponding to the two baseline operation modes are given in detail in this paper.
基金Project supported by the National Natural Science Foundation of China (Grant No.10574011)
文摘The irradiance of an elliptic Gaussian beam that is high enough to excite high-order nonlinear refraction effect is used to calculate the normalized on-axis transmittance function in the z-scan technique by introducing complex beam parameters which make the calculation simpler. The transmittance formula is applied to the first-, first two-, and first three-order nonlinearities. Numerical evaluation shows that the symmetry no longer holds when using an elliptic Gaussian beam instead of a circular Gaussian beam. A distortion is observed in the central part of the curve, which decreases as ellipticity increases. Moreover, the variation of the normalized peak-valley difference decreases as ellipticity decreases.
基金This project is supported by National Natural Science Foundation of China(No.60573178)Provincial Natural Science Foundation of Hubei China(No.2006ABA074).
文摘Aiming at the approximate error of commonly used methods on calculation of hydrostatic pressures of closed hydrostatic guideways with multiple pockets, a more accurate solution is proposed. Taking design of beam ＆ slide-rest guideways for a heavy duty CNC vertical turning mill as an example, under an assumption that stiffnesses of guideways and their jointing structure are sufficiently large, the pressures of the pockets can be attained by adding a co-planarity equation that constrains pocket centers. Then, an optimization model is built to minimize the highest pocket pressure under additional constraints that are posed on the highest seal margin pressure, the highest levitating pressure of the pockets, and the maximum deformation of the guideways. The optimization problem is solved sequentially by using the methods of design of experiments and adaptive simulated annealing on iSIGHT software platform. The results show significant improvements to the original design. Optimized maximum hydrostatic pressure meets the requirement of hydraulic system.
基金supported by the National Natural Science Foundation of China(61703114,61673126,61703217,U1701261)the Science and Technology Plan Project of Guangdong(2014B090907010,2015B010131014)
文摘Particle accelerators are devices used for research in scientific problems such as high energy and nuclear physics.In a particle accelerator, the shape of particle beam envelope is changed dynamically along the forward direction. Thus, this reference direction can be considered as an auxiliary "time" beam axis. In this paper, the optimal beam matching control problem for a low energy transport system in a charged particle accelerator is considered. The beam matching procedure is formulated as a finite "time" dynamic optimization problem, in which the Kapchinsky-Vladimirsky(K-V) coupled envelope equations model beam dynamics. The aim is to drive any arbitrary initial beam state to a prescribed target state, as well as to track reference trajectory as closely as possible, through the control of the lens focusing strengths in the beam matching channel. We first apply the control parameterization method to optimize lens focusing strengths, and then combine this with the time-scaling transformation technique to further optimize the drift and lens length in the beam matching channel. The exact gradients of the cost function with respect to the decision parameters are computed explicitly through the state sensitivity-based analysis method. Finally, numerical simulations are illustrated to verify the effectiveness of the proposed approach.
基金supported by the Ministry of Science,ICT and Future Planning of the Republic of Korea under the ITER Technology R&D ProgramNational R&D Program Through the National Research Foundation of Korea(NRF)Funded by the Ministry of Science,ICT&Future Planning(NRF-2014M1A7A1A03045372)
文摘A large-area high-power radio-frequency（RF） driven ion source was developed for positive and negative neutral beam injectors at the Korea Atomic Energy Research Institute（KAERI）. The RF ion source consists of a driver region, including a helical antenna and a discharge chamber, and an expansion region. RF power can be transferred at up to 10 kW with a fixed frequency of 2 MHz through an optimized RF matching system. An actively water-cooled Faraday shield is located inside the driver region of the ion source for the stable and steady-state operations of high-power RF discharge. Plasma ignition of the ion source is initiated by the injection of argongas without a starter-filament heating, and the argon-gas is then slowly exchanged by the injection of hydrogen-gas to produce pure hydrogen plasmas. The uniformities of the plasma parameter,such as a plasma density and an electron temperature, are measured at the lowest area of the driver region using two RF-compensated electrostatic probes along the direction of the shortand long-dimensions of the driver region. The plasma parameters will be compared with those obtained at the lowest area of the expansion bucket to analyze the plasma expansion properties from the driver region to the expansion region.
文摘在汽车仪表板横梁(Cross Car Beam,CCB)的设计开发初始阶段,选取一些设计参数作为设计变量,利用SFE建立针对这些变量的参数化模型,选取适当的DOE正交矩阵列表输出参数化模型.使用Kriging方法构建性能结果的响应面近似模型,通过主效应和贡献量的对比分析发现圆管梁的直径和壁厚是最关键的设计变量,为仪表板横梁的设计提供指导.借助Isight优化算法在整个样本空间中寻找最优结构设计并进行虚拟仿真验证,从而得到最优的实际产品结构.
