The pseudo-two-dimensional(P2D)model plays an important role in exploring physicochemical mechanisms,predicting the state of health,and improving the fast charge capability for Li-ion batteries(LIBs).However,the fast ...The pseudo-two-dimensional(P2D)model plays an important role in exploring physicochemical mechanisms,predicting the state of health,and improving the fast charge capability for Li-ion batteries(LIBs).However,the fast charge leads to the lithium concentration gradient in the solid and electrolyte phases and the non-uniform electrochemical reaction at the solid/electrolyte interface.In order to decouple charge transfer reactions in LIBs under dynamic conditions,understanding the spatio-temporal resolution of the P2D model is urgently required.Till now,the study of this aspect is still insufficient.This work studies the spatio-temporal resolution for dynamic/static electrochemical impedance spectroscopy(DEIS/SEIS)on multiple scales.In detail,DEIS and SEIS with spatio-temporal resolutions are used to decouple charge transfer reactions in LIBs based on the numerical solution of the P2D model in the frequency domain.The calculated results indicate that decoupling solid diffusion requires a high spatial resolution along the r-direction in particles,decoupling electrolyte diffusion and interfacial transfer reaction requires a high spatial resolution along the x-direction,and decoupling charge transfer reactions in LIBs at an extremely low state of charge(SOC)requires an extremely high temporal resolution along the t-direction.Finally,the optimal range of spatio-temporal resolutions for DEIS/SEIS is derived,and the method to decouple charge transfer reactions with spatio-temporal resolutions is developed.展开更多
In order to simulate electrical characteristics of a lithium-ion battery used in electric vehicles in a good manner,a three-layer battery model is established.The charge of the lithium-ion battery is assumed to distri...In order to simulate electrical characteristics of a lithium-ion battery used in electric vehicles in a good manner,a three-layer battery model is established.The charge of the lithium-ion battery is assumed to distribute among the three layers and their interaction is used to depict hysteresis and relaxation effect observed in the lithium-ion battery.The model parameters are calibrated and optimized through a numerically nonlinear least squares algorithm in Simulink Parameter Estimation Toolbox for an experimental data set sampled in a hybrid pulse test of the battery.Evaluation results showed that the established model is able to provide an acceptable accuracy in estimating the State of Charge of the lithium-ion battery in an open-loop fashion for a sufficiently long time and to describe the battery voltage behavior more accurately than a commonly used battery model.The battery modeling accuracy can thereby satisfy the requirement for practical electric vehicle applications.展开更多
In order to simulate the dynamical behavior of a lithium ion traction battery used in elec tric vehicles, an equivalent circuit based battery model was established. The methodology in the guide document of the ADVISO...In order to simulate the dynamical behavior of a lithium ion traction battery used in elec tric vehicles, an equivalent circuit based battery model was established. The methodology in the guide document of the ADVISOR software was used to determine the initial parameters of the model as a function of state of charge （ SoC ） over an experimental data set of the battery. A numerically nonlinear least squares algorithm in SIMULINK design optimization toolbox was applied to further op timize the model parameters. Validation results showed that the battery model could well describe the dynamic behavior of the lithinm ion battery in two different battery loading situations.展开更多
Lithium ion battery has typical character of distributed parameter system, and can be described precisely by partial differential equations and multi-physics theory because lithium ion battery is a complicated electro...Lithium ion battery has typical character of distributed parameter system, and can be described precisely by partial differential equations and multi-physics theory because lithium ion battery is a complicated electrochemical energy storage system. A novel failure prediction modeling method of lithium ion battery based on distributed parameter estimation and single particle model is proposed in this work. Lithium ion concentration in the anode of lithium ion battery is an unmeasurable distributed variable. Failure prediction system can estimate lithium ion concentration online, track the failure residual which is the difference between the estimated value and the ideal value. The precaution signal will be triggered when the failure residual is beyond the predefined failure precaution threshold, and the failure countdown prediction module will be activated. The remaining time of the severe failure threshold can be estimated by the failure countdown prediction module according to the changing rate of the failure residual. A simulation example verifies that lithium ion concentration in the anode of lithium ion battery can be estimated exactly and effectively by the failure prediction model. The precaution signal can be triggered reliably, and the remaining time of the severe failure can be forecasted accurately by the failure countdown prediction module.展开更多
A Recent paper by Ma et al.,claims to estimate the state of charge of Lithium-ion batteries with a fractionalorder impedance model including a Warburg and a constant phase element(CPE)with a maximum error of 0.5%[1].T...A Recent paper by Ma et al.,claims to estimate the state of charge of Lithium-ion batteries with a fractionalorder impedance model including a Warburg and a constant phase element(CPE)with a maximum error of 0.5%[1].The proposed equivalent circuit model from[1]is reproduced in Fig.1.展开更多
The increasing penetration of second-life battery energy storage systems(SLBESS)in power grids presents substantial challenges to system operation and control due to the heterogeneous characteristics and uncertain deg...The increasing penetration of second-life battery energy storage systems(SLBESS)in power grids presents substantial challenges to system operation and control due to the heterogeneous characteristics and uncertain degradation patterns of repurposed batteries.This paper presents a novel model-free adaptive voltage controlembedded dung beetle-inspired heuristic optimization algorithmfor optimal SLBESS capacity configuration and power dispatch.To simultaneously address the computational complexity and ensure system stability,this paper develops a comprehensive bilevel optimization framework.At the upper level,a dung beetle optimization algorithmdetermines the optimal SLBESS capacity configuration byminimizing total lifecycle costswhile incorporating the charging/discharging power trajectories derived from the model-free adaptive voltage control strategy.At the lower level,a health-priority power dispatch optimization model intelligently allocates power demands among heterogeneous battery groups based on their real-time operational states,state-of-health variations,and degradation constraints.The proposed model-free approach circumvents the need for complex battery charging/discharging power controlmodels and extensive historical data requirements whilemaintaining system stability through adaptive controlmechanisms.A novel cycle life degradation model is developed to quantify the relationship between remaining useful life,depth of discharge,and operational patterns.The integrated framework enables simultaneous strategic planning and operational control,ensuring both economic efficiency and extended battery lifespan.The effectiveness of the proposed method is validated through comprehensive case studies on hybrid energy storage systems,demonstrating superior computational efficiency,robust performance across different network configurations,and significant improvements in battery utilization compared to conventional approaches.展开更多
When considering the mechanism of the batteries,the capacity reduction at storage(when not in use)and cycling(during use)and increase of internal resistance is because of degradation in the chemical composition inside...When considering the mechanism of the batteries,the capacity reduction at storage(when not in use)and cycling(during use)and increase of internal resistance is because of degradation in the chemical composition inside the batteries.To optimize battery usage,a battery management system(BMS)is used to estimate possible aging effects while different load profiles are requested from the grid.This is specifically seen in a case when the vehicle is connected to the net(online through BMS).During this process,the BMS chooses the optimized load profiles based on the least aging effects on the battery pack.The major focus of this paper is to design an algorithm/model for lithium iron phosphate(LiFePO4)batteries.The model of the batteries is based on the accelerated aging test data(data from the beginning of life till the end of life).The objective is to develop an algorithm based on the actual battery trend during the whole life of the battery.By the analysis of the test data,the complete trend of the battery aging and the factors on which the aging is depending on is identified,the aging model can then be recalibrated to avoid any differences in the production process during cell manufacturing.The validation of the model was carried out at the end by utilizing different driving profiles at different C-rates and different ambient temperatures.A Linear and non-linear model-based approach is used based on statistical data.The parameterization was carried out by dividing the data into small chunks and estimating the parameters for the individual chunks.Self-adaptive characteristic map using a lookup table was also used.The nonlinear model was chosen as the best candidate among all other approaches for longer validation of 8-month data with real driving data set.展开更多
We used an analytical high-level battery model to estimate the battery lifetime for a given load.The experimental results show that this model to predict battery lifetime under variable loads is more appropriate than ...We used an analytical high-level battery model to estimate the battery lifetime for a given load.The experimental results show that this model to predict battery lifetime under variable loads is more appropriate than that under constant loads.展开更多
Lithium-ion batteries have always been a focus of research on new energy vehicles,however,their internal reactions are complex,and problems such as battery aging and safety have not been fully understood.In view of th...Lithium-ion batteries have always been a focus of research on new energy vehicles,however,their internal reactions are complex,and problems such as battery aging and safety have not been fully understood.In view of the research and preliminary application of the digital twin in complex systems such as aerospace,we will have the opportunity to use the digital twin to solve the bottleneck of current battery research.Firstly,this paper arranges the development history,basic concepts and key technologies of the digital twin,and summarizes current research methods and challenges in battery modeling,state estimation,remaining useful life prediction,battery safety and control.Furthermore,based on digital twin we describe the solutions for battery digital modeling,real-time state estimation,dynamic charging control,dynamic thermal management,and dynamic equalization control in the intelligent battery management system.We also give development opportunities for digital twin in the battery field.Finally we summarize the development trends and challenges of smart battery management.展开更多
Large numbers of electric vehicles(EVs)charged in residential district parking lots may cause the overload of power grid distribution.The studies of EVs'charging characteristics are helpful to the intelligent sche...Large numbers of electric vehicles(EVs)charged in residential district parking lots may cause the overload of power grid distribution.The studies of EVs'charging characteristics are helpful to the intelligent schedule of EVs'charging so as to minimize its influence.展开更多
The technology deployed for lithium-ion battery state of charge(SOC)estimation is an important part of the design of electric vehicle battery management systems.Accurate SOC estimation can forestall excessive charging...The technology deployed for lithium-ion battery state of charge(SOC)estimation is an important part of the design of electric vehicle battery management systems.Accurate SOC estimation can forestall excessive charging and discharging of lithium-ion batteries,thereby improving discharge efficiency and extending cycle life.In this study,the key lithium-ion battery SOC estimation technologies are summarized.First,the research status of lithium-ion battery modeling is introduced.Second,the main technologies and difficulties in model parameter identification for lithium-ion batteries are discussed.Third,the development status and advantages and disadvantages of SOC estimation methods are summarized.Finally,the current research problems and prospects for development trends are summarized.展开更多
In order to characterize the voltage behavior of a lithium-ion battery for on-board electric vehicle battery management and control applications,a battery model with a moderate complexity was established.The battery o...In order to characterize the voltage behavior of a lithium-ion battery for on-board electric vehicle battery management and control applications,a battery model with a moderate complexity was established.The battery open circuit voltage (OCV) as a function of state of charge (SOC) was depicted by the Nernst equation.An equivalent circuit network was adopted to describe the polarization effect of the lithium-ion battery.A linear identifiable formulation of the battery model was derived by discretizing the frequent-domain description of the battery model.The recursive least square algorithm with forgetting was applied to implement the on-line parameter calibration.The validation results show that the on-line calibrated model can accurately predict the dynamic voltage behavior of the lithium-ion battery.The maximum and mean relative errors are 1.666% and 0.01%,respectively,in a hybrid pulse test,while 1.933% and 0.062%,respectively,in a transient power test.The on-line parameter calibration method thereby can ensure that the model possesses an acceptable robustness to varied battery loading profiles.展开更多
In this paper,the case of a battery charger for electric vehicles based on a wireless power transmission is addressed.The specificity of every stage of the overall system is presented.Based on calculated and measured ...In this paper,the case of a battery charger for electric vehicles based on a wireless power transmission is addressed.The specificity of every stage of the overall system is presented.Based on calculated and measured results,relevant capacitive compensations of the transformer and models are suggested and discussed in order to best match the operating mode and aiming at simplifying as much as possible the control and the electronics of the charger.展开更多
Battery models are of great importance to develop portable computing systems,for whether the design of low power hardware architecture or the design of battery-aware scheduling policies.In this paper,we present a phys...Battery models are of great importance to develop portable computing systems,for whether the design of low power hardware architecture or the design of battery-aware scheduling policies.In this paper,we present a physically justified iterative computing method to illustrate the discharge,recovery and charge process of Li/Li-ion batteries.The discharge and recovery processes correspond well to an existing accurate analytical battery model:R-V-W's analytical model,and thus interpret this model algorithmically.Our method can also extend R-V-W's model easily to accommodate the charge process.The work will help the system designers to grasp the characteristics of R-V-W's battery model and also,enable to predict the battery behavior in the charge process in a uniform way as the discharge process and the recovery process.Experiments are performed to show the ac-curacy of the extended model by comparing the predicted charge times with those derived from the DUALFOIL simulations.Various profiles with different combinations of battery modes were tested.The experimental results show that the extended battery model preserves high accuracy in predicting the charge behavior.展开更多
Lithium-ion batteries are widely recognized as a crucial enabling technology for the advancement of electric vehicles and energy storage systems in the grid.The design of battery state estimation and control algorithm...Lithium-ion batteries are widely recognized as a crucial enabling technology for the advancement of electric vehicles and energy storage systems in the grid.The design of battery state estimation and control algorithms in battery management systems is usually based on battery models,which interpret crucial battery dynamics through the utilization of mathematical functions.Therefore,the investigation of battery dynamics with the purpose of battery system identification has garnered considerable attention in the realm of battery research.Characterization methods in terms of linear and nonlinear response of lithium-ion batteries have emerged as a prominent area of study in this field.This review has undertaken an analysis and discussion of characterization methods,with a particular focus on the motivation of battery system identification.Specifically,this work encompasses the incorporation of frequency domain nonlinear characterization methods and dynamics-based battery electrical models.The aim of this study is to establish a connection between the characterization and identification of battery systems for researchers and engineers specialized in the field of batteries,with the intention of promoting the advancement of efficient battery technology for real-world applications.展开更多
This paper presents findings on dynamic cell modeling for state-of-charge (SOC) estimation in an autonomous electric vehicle (AEV). The studied cells are Lithium-Ion Polymer-based with a nominal capacity of around 8 A...This paper presents findings on dynamic cell modeling for state-of-charge (SOC) estimation in an autonomous electric vehicle (AEV). The studied cells are Lithium-Ion Polymer-based with a nominal capacity of around 8 Ah, optimized for power-needy applications. The AEV operates in a harsh environment with rate requirements up to ±25C and highly dynamic rate profiles, unlike portable-electronic applications with constant power output and fractional C rates. SOC estimation methods effective in portable electronics may not suffice for the AEV. Accurate SOC estimation necessitates a precise cell model. The proposed SOC estimation method utilizes a detailed Kalman-filtering approach. The cell model must include SOC as a state in the model state vector. Multiple cell models are presented, starting with a simple one employing “Coulomb counting” as the state equation and Shepherd’s rule as the output equation, lacking prediction of cell relaxation dynamics. An improved model incorporates filter states to account for relaxation and other dynamics in closed-circuit cell voltage, yielding better performance. The best overall results are achieved with a method combining nonlinear autoregressive filtering and dynamic radial basis function networks. The paper includes lab test results comparing physical cells with model predictions. The most accurate models obtained have an RMS estimation error lower than the quantization noise floor expected in the battery-management-system design. Importantly, these models enable precise SOC estimation, allowing the vehicle controller to utilize the battery pack’s full operating range without overcharging or undercharging concerns.展开更多
Lithium-ion batteries have become one of the most promising technologies for speeding up clean automotive applications,where electrode plays a pivotal role in determining battery performance.Due to the strongly-couple...Lithium-ion batteries have become one of the most promising technologies for speeding up clean automotive applications,where electrode plays a pivotal role in determining battery performance.Due to the strongly-coupled and highly complex processes to produce battery electrode,it is imperative to develop an effective solution that can predict the properties of battery electrode and perform reliable sensitivity analysis on the key features and parameters during the production process.This paper proposes a novel tree boosting model-based framework to analyze and predict how the battery electrode properties vary with respect to parameters during the early production stage.Three data-based interpretable models including AdaBoost,LPBoost,and TotalBoost are presented and compared.Four key parameters including three slurry feature variables and one coating process parameter are analyzed to quantify their effects on both mass loading and porosity of battery electrode.The results demonstrate that the proposed tree model-based framework is capable of providing efficient quantitative analysis on the importance and correlation of the related parameters and producing satisfying early-stage prediction of battery electrode properties.These can benefit a deep understanding of battery electrodes and facilitate to optimizing battery electrode design for automotive applications.展开更多
With the aggravation of environmental problems caused by the long-term dependence of shipping traffic on heavy fossil fuels,it is an irreversible development trend for electrified ships to integrate large-capacity bat...With the aggravation of environmental problems caused by the long-term dependence of shipping traffic on heavy fossil fuels,it is an irreversible development trend for electrified ships to integrate large-capacity battery energy storage systems(ESSs).As the main component,the shipboard lithium-ion battery(LIB)plays an important role in the operation of ship power system to balance the source and load sides.By analyzing the effects of temperature,vibration,humidity and salt spray on battery characteristics in the shipping environment,this paper points out that the characteristics of shipboard LIB have certain differences on the state changes with the land-based batteries.Then,this paper systematically reviews the most commonly used LIB modeling and state estimation methods and their applicability to the shipping environment,including the empirical models,electrochemical models,equivalent circuit models(ECMs)and data-driven models.On this basis,the state estimation methods of state of charge(SOC),state of power(SOP),state of health(SOH),state of energy(SOE)and state of temperature(SOT)are reviewed.Finally,the challenges and prospects of shipboard LIB research are prospected,in the hope of providing inspiration for the development and design of efficient and safe electric ships.展开更多
The hysteresis effect represents the difference in open circuit voltage(OCV)between the charge and discharge processes of batteries.An accurate estimation of open circuit voltage considering hysteresis is critical for...The hysteresis effect represents the difference in open circuit voltage(OCV)between the charge and discharge processes of batteries.An accurate estimation of open circuit voltage considering hysteresis is critical for precise modeling of LiFePO_(4)batteries.However,the intricate influence of state-of-charge(SOC),temperature,and battery aging have posed significant challenges for hysteresis modeling,which have not been comprehensively considered in existing studies.This paper proposes a data-driven approach with adversarial learning to model hysteresis under diverse conditions,addressing the intricate dependencies on SOC,temperature,and battery aging.First,a comprehensive experimental scheme is designed to collect hysteresis dataset under diverse SOC paths,temperatures and aging states.Second,the proposed data-driven model integrates a conditional generative adversarial network with long short-term memory networks to enhance the model’s accuracy and adaptability.The generator and discriminator are designed based on LSTM networks to capture the dependency of hysteresis on historical SOC and conditional information.Third,the conditional matrix,incorporating temperature,health state,and historical paths,is constructed to provide the scenario-specific information for the adversarial network,thereby enhancing the model’s adaptability.Experimental results demonstrate that the proposed model achieves a voltage error of less than 3.8 mV across various conditions,with accuracy improvements of 31.3–48.7%compared to three state-of-the-art models.展开更多
Modeling and state of charge(SOC)estimation of Lithium cells are crucial techniques of the lithium battery management system.The modeling is extremely complicated as the operating status of lithium battery is affected...Modeling and state of charge(SOC)estimation of Lithium cells are crucial techniques of the lithium battery management system.The modeling is extremely complicated as the operating status of lithium battery is affected by temperature,current,cycle number,discharge depth and other factors.This paper studies the modeling of lithium iron phosphate battery based on the Thevenin’s equivalent circuit and a method to identify the open circuit voltage,resistance and capacitance in the model is proposed.To improve the accuracy of the lithium battery model,a capacity estimation algorithm considering the capacity loss during the battery’s life cycle.In addition,this paper solves the SOC estimation issue of the lithium battery caused by the uncertain noise using the extended Kalman filtering(EKF)algorithm.A simulation model of actual lithium batteries is designed in Matlab/Simulink and the simulation results verify the accuracy of the model under different operating modes.展开更多
基金supported by the National Natural Science Foundation of China(Nos.22479092 and 22078190)。
文摘The pseudo-two-dimensional(P2D)model plays an important role in exploring physicochemical mechanisms,predicting the state of health,and improving the fast charge capability for Li-ion batteries(LIBs).However,the fast charge leads to the lithium concentration gradient in the solid and electrolyte phases and the non-uniform electrochemical reaction at the solid/electrolyte interface.In order to decouple charge transfer reactions in LIBs under dynamic conditions,understanding the spatio-temporal resolution of the P2D model is urgently required.Till now,the study of this aspect is still insufficient.This work studies the spatio-temporal resolution for dynamic/static electrochemical impedance spectroscopy(DEIS/SEIS)on multiple scales.In detail,DEIS and SEIS with spatio-temporal resolutions are used to decouple charge transfer reactions in LIBs based on the numerical solution of the P2D model in the frequency domain.The calculated results indicate that decoupling solid diffusion requires a high spatial resolution along the r-direction in particles,decoupling electrolyte diffusion and interfacial transfer reaction requires a high spatial resolution along the x-direction,and decoupling charge transfer reactions in LIBs at an extremely low state of charge(SOC)requires an extremely high temporal resolution along the t-direction.Finally,the optimal range of spatio-temporal resolutions for DEIS/SEIS is derived,and the method to decouple charge transfer reactions with spatio-temporal resolutions is developed.
基金Sponsored by the National Natural Science Foundation of China (Grant No.50905015)the National High Technology Research and Development Program of China (Grant No.2003AA501800)
文摘In order to simulate electrical characteristics of a lithium-ion battery used in electric vehicles in a good manner,a three-layer battery model is established.The charge of the lithium-ion battery is assumed to distribute among the three layers and their interaction is used to depict hysteresis and relaxation effect observed in the lithium-ion battery.The model parameters are calibrated and optimized through a numerically nonlinear least squares algorithm in Simulink Parameter Estimation Toolbox for an experimental data set sampled in a hybrid pulse test of the battery.Evaluation results showed that the established model is able to provide an acceptable accuracy in estimating the State of Charge of the lithium-ion battery in an open-loop fashion for a sufficiently long time and to describe the battery voltage behavior more accurately than a commonly used battery model.The battery modeling accuracy can thereby satisfy the requirement for practical electric vehicle applications.
基金Supported by the National Natural Science Foundation of China(50905015)
文摘In order to simulate the dynamical behavior of a lithium ion traction battery used in elec tric vehicles, an equivalent circuit based battery model was established. The methodology in the guide document of the ADVISOR software was used to determine the initial parameters of the model as a function of state of charge （ SoC ） over an experimental data set of the battery. A numerically nonlinear least squares algorithm in SIMULINK design optimization toolbox was applied to further op timize the model parameters. Validation results showed that the battery model could well describe the dynamic behavior of the lithinm ion battery in two different battery loading situations.
基金This work was supported by the Fundamental Research Funds for the Central Universities （No.2017JBM003）, the National Natural Science Foundation of China （No.61575053, No.61504008）, and the Specialized Research Fund for the Doctoral Program of Higher Education of China （No.20130009120042）.
文摘Lithium ion battery has typical character of distributed parameter system, and can be described precisely by partial differential equations and multi-physics theory because lithium ion battery is a complicated electrochemical energy storage system. A novel failure prediction modeling method of lithium ion battery based on distributed parameter estimation and single particle model is proposed in this work. Lithium ion concentration in the anode of lithium ion battery is an unmeasurable distributed variable. Failure prediction system can estimate lithium ion concentration online, track the failure residual which is the difference between the estimated value and the ideal value. The precaution signal will be triggered when the failure residual is beyond the predefined failure precaution threshold, and the failure countdown prediction module will be activated. The remaining time of the severe failure threshold can be estimated by the failure countdown prediction module according to the changing rate of the failure residual. A simulation example verifies that lithium ion concentration in the anode of lithium ion battery can be estimated exactly and effectively by the failure prediction model. The precaution signal can be triggered reliably, and the remaining time of the severe failure can be forecasted accurately by the failure countdown prediction module.
文摘A Recent paper by Ma et al.,claims to estimate the state of charge of Lithium-ion batteries with a fractionalorder impedance model including a Warburg and a constant phase element(CPE)with a maximum error of 0.5%[1].The proposed equivalent circuit model from[1]is reproduced in Fig.1.
基金Financial support was provided by the State Grid Sichuan Electric Power Company Science and Technology Project“Key Research on Development Path Planning and Key Operation Technologies of New Rural Electrification Construction”under Grant No.52199623000G.
文摘The increasing penetration of second-life battery energy storage systems(SLBESS)in power grids presents substantial challenges to system operation and control due to the heterogeneous characteristics and uncertain degradation patterns of repurposed batteries.This paper presents a novel model-free adaptive voltage controlembedded dung beetle-inspired heuristic optimization algorithmfor optimal SLBESS capacity configuration and power dispatch.To simultaneously address the computational complexity and ensure system stability,this paper develops a comprehensive bilevel optimization framework.At the upper level,a dung beetle optimization algorithmdetermines the optimal SLBESS capacity configuration byminimizing total lifecycle costswhile incorporating the charging/discharging power trajectories derived from the model-free adaptive voltage control strategy.At the lower level,a health-priority power dispatch optimization model intelligently allocates power demands among heterogeneous battery groups based on their real-time operational states,state-of-health variations,and degradation constraints.The proposed model-free approach circumvents the need for complex battery charging/discharging power controlmodels and extensive historical data requirements whilemaintaining system stability through adaptive controlmechanisms.A novel cycle life degradation model is developed to quantify the relationship between remaining useful life,depth of discharge,and operational patterns.The integrated framework enables simultaneous strategic planning and operational control,ensuring both economic efficiency and extended battery lifespan.The effectiveness of the proposed method is validated through comprehensive case studies on hybrid energy storage systems,demonstrating superior computational efficiency,robust performance across different network configurations,and significant improvements in battery utilization compared to conventional approaches.
文摘When considering the mechanism of the batteries,the capacity reduction at storage(when not in use)and cycling(during use)and increase of internal resistance is because of degradation in the chemical composition inside the batteries.To optimize battery usage,a battery management system(BMS)is used to estimate possible aging effects while different load profiles are requested from the grid.This is specifically seen in a case when the vehicle is connected to the net(online through BMS).During this process,the BMS chooses the optimized load profiles based on the least aging effects on the battery pack.The major focus of this paper is to design an algorithm/model for lithium iron phosphate(LiFePO4)batteries.The model of the batteries is based on the accelerated aging test data(data from the beginning of life till the end of life).The objective is to develop an algorithm based on the actual battery trend during the whole life of the battery.By the analysis of the test data,the complete trend of the battery aging and the factors on which the aging is depending on is identified,the aging model can then be recalibrated to avoid any differences in the production process during cell manufacturing.The validation of the model was carried out at the end by utilizing different driving profiles at different C-rates and different ambient temperatures.A Linear and non-linear model-based approach is used based on statistical data.The parameterization was carried out by dividing the data into small chunks and estimating the parameters for the individual chunks.Self-adaptive characteristic map using a lookup table was also used.The nonlinear model was chosen as the best candidate among all other approaches for longer validation of 8-month data with real driving data set.
基金The MKE(the Ministry of Knowledge Economy),Korea,under the ITRC(Information Technology Research Center)support program supervised by the NIPA(National IT Industry Promotion Agency) (NIPA-2011-C1090-1021-0010)Seoul Metropolitan Government,under the Seoul R & BD Program supervised by Seoul Business Agency(No.ST110039)
文摘We used an analytical high-level battery model to estimate the battery lifetime for a given load.The experimental results show that this model to predict battery lifetime under variable loads is more appropriate than that under constant loads.
基金Supported by National Natural Science Foundation of China(Grant No.51922006).
文摘Lithium-ion batteries have always been a focus of research on new energy vehicles,however,their internal reactions are complex,and problems such as battery aging and safety have not been fully understood.In view of the research and preliminary application of the digital twin in complex systems such as aerospace,we will have the opportunity to use the digital twin to solve the bottleneck of current battery research.Firstly,this paper arranges the development history,basic concepts and key technologies of the digital twin,and summarizes current research methods and challenges in battery modeling,state estimation,remaining useful life prediction,battery safety and control.Furthermore,based on digital twin we describe the solutions for battery digital modeling,real-time state estimation,dynamic charging control,dynamic thermal management,and dynamic equalization control in the intelligent battery management system.We also give development opportunities for digital twin in the battery field.Finally we summarize the development trends and challenges of smart battery management.
文摘Large numbers of electric vehicles(EVs)charged in residential district parking lots may cause the overload of power grid distribution.The studies of EVs'charging characteristics are helpful to the intelligent schedule of EVs'charging so as to minimize its influence.
基金supported by research on value model and technology application of patent operation of science and technology project(52094020000U)National Natural Science Foundation of China(52177193).
文摘The technology deployed for lithium-ion battery state of charge(SOC)estimation is an important part of the design of electric vehicle battery management systems.Accurate SOC estimation can forestall excessive charging and discharging of lithium-ion batteries,thereby improving discharge efficiency and extending cycle life.In this study,the key lithium-ion battery SOC estimation technologies are summarized.First,the research status of lithium-ion battery modeling is introduced.Second,the main technologies and difficulties in model parameter identification for lithium-ion batteries are discussed.Third,the development status and advantages and disadvantages of SOC estimation methods are summarized.Finally,the current research problems and prospects for development trends are summarized.
基金Project(50905015) supported by the National Natural Science Foundation of China
文摘In order to characterize the voltage behavior of a lithium-ion battery for on-board electric vehicle battery management and control applications,a battery model with a moderate complexity was established.The battery open circuit voltage (OCV) as a function of state of charge (SOC) was depicted by the Nernst equation.An equivalent circuit network was adopted to describe the polarization effect of the lithium-ion battery.A linear identifiable formulation of the battery model was derived by discretizing the frequent-domain description of the battery model.The recursive least square algorithm with forgetting was applied to implement the on-line parameter calibration.The validation results show that the on-line calibrated model can accurately predict the dynamic voltage behavior of the lithium-ion battery.The maximum and mean relative errors are 1.666% and 0.01%,respectively,in a hybrid pulse test,while 1.933% and 0.062%,respectively,in a transient power test.The on-line parameter calibration method thereby can ensure that the model possesses an acceptable robustness to varied battery loading profiles.
文摘In this paper,the case of a battery charger for electric vehicles based on a wireless power transmission is addressed.The specificity of every stage of the overall system is presented.Based on calculated and measured results,relevant capacitive compensations of the transformer and models are suggested and discussed in order to best match the operating mode and aiming at simplifying as much as possible the control and the electronics of the charger.
基金Project partly supported by the Key Program of the National NaturalScience Foundation of China (No. 60533040)the National Natural Science Funds for Distinguished Young Scholar (No. 60525202)+1 种基金the Program for New Century Excellent Talents in University (No. NCET-04-0545)the Key Scientific and Technological Project of Hangzhou Technology Bureau (No. 20062412B01),China
文摘Battery models are of great importance to develop portable computing systems,for whether the design of low power hardware architecture or the design of battery-aware scheduling policies.In this paper,we present a physically justified iterative computing method to illustrate the discharge,recovery and charge process of Li/Li-ion batteries.The discharge and recovery processes correspond well to an existing accurate analytical battery model:R-V-W's analytical model,and thus interpret this model algorithmically.Our method can also extend R-V-W's model easily to accommodate the charge process.The work will help the system designers to grasp the characteristics of R-V-W's battery model and also,enable to predict the battery behavior in the charge process in a uniform way as the discharge process and the recovery process.Experiments are performed to show the ac-curacy of the extended model by comparing the predicted charge times with those derived from the DUALFOIL simulations.Various profiles with different combinations of battery modes were tested.The experimental results show that the extended battery model preserves high accuracy in predicting the charge behavior.
基金supported by the National Natural Science Foundation of China(Grant No.62373224)the Scientific Research Foundation of Nanjing Institute of Technology(Grant No.YKJ202212)+1 种基金the Nanjing Overseas Educated Personnel Science and Technology Innovation Projectthe Open Research Fund of Jiangsu Collaborative Innovation Center for Smart Distribution Network,Nanjing Institute of Technology(Grant No.XTCX202307)。
文摘Lithium-ion batteries are widely recognized as a crucial enabling technology for the advancement of electric vehicles and energy storage systems in the grid.The design of battery state estimation and control algorithms in battery management systems is usually based on battery models,which interpret crucial battery dynamics through the utilization of mathematical functions.Therefore,the investigation of battery dynamics with the purpose of battery system identification has garnered considerable attention in the realm of battery research.Characterization methods in terms of linear and nonlinear response of lithium-ion batteries have emerged as a prominent area of study in this field.This review has undertaken an analysis and discussion of characterization methods,with a particular focus on the motivation of battery system identification.Specifically,this work encompasses the incorporation of frequency domain nonlinear characterization methods and dynamics-based battery electrical models.The aim of this study is to establish a connection between the characterization and identification of battery systems for researchers and engineers specialized in the field of batteries,with the intention of promoting the advancement of efficient battery technology for real-world applications.
文摘This paper presents findings on dynamic cell modeling for state-of-charge (SOC) estimation in an autonomous electric vehicle (AEV). The studied cells are Lithium-Ion Polymer-based with a nominal capacity of around 8 Ah, optimized for power-needy applications. The AEV operates in a harsh environment with rate requirements up to ±25C and highly dynamic rate profiles, unlike portable-electronic applications with constant power output and fractional C rates. SOC estimation methods effective in portable electronics may not suffice for the AEV. Accurate SOC estimation necessitates a precise cell model. The proposed SOC estimation method utilizes a detailed Kalman-filtering approach. The cell model must include SOC as a state in the model state vector. Multiple cell models are presented, starting with a simple one employing “Coulomb counting” as the state equation and Shepherd’s rule as the output equation, lacking prediction of cell relaxation dynamics. An improved model incorporates filter states to account for relaxation and other dynamics in closed-circuit cell voltage, yielding better performance. The best overall results are achieved with a method combining nonlinear autoregressive filtering and dynamic radial basis function networks. The paper includes lab test results comparing physical cells with model predictions. The most accurate models obtained have an RMS estimation error lower than the quantization noise floor expected in the battery-management-system design. Importantly, these models enable precise SOC estimation, allowing the vehicle controller to utilize the battery pack’s full operating range without overcharging or undercharging concerns.
基金supported by the EPSRC under grant EP/R030243/1the High Value Manufacturing Catapult project under Grant No.8248 CORE。
文摘Lithium-ion batteries have become one of the most promising technologies for speeding up clean automotive applications,where electrode plays a pivotal role in determining battery performance.Due to the strongly-coupled and highly complex processes to produce battery electrode,it is imperative to develop an effective solution that can predict the properties of battery electrode and perform reliable sensitivity analysis on the key features and parameters during the production process.This paper proposes a novel tree boosting model-based framework to analyze and predict how the battery electrode properties vary with respect to parameters during the early production stage.Three data-based interpretable models including AdaBoost,LPBoost,and TotalBoost are presented and compared.Four key parameters including three slurry feature variables and one coating process parameter are analyzed to quantify their effects on both mass loading and porosity of battery electrode.The results demonstrate that the proposed tree model-based framework is capable of providing efficient quantitative analysis on the importance and correlation of the related parameters and producing satisfying early-stage prediction of battery electrode properties.These can benefit a deep understanding of battery electrodes and facilitate to optimizing battery electrode design for automotive applications.
基金supported by the Technology Project of State Grid Corporation of China,Project No.5108-202218280A-2-314-XGthe Central University Basic Research Business Fee Project,Project No.2023CDJXY-028.
文摘With the aggravation of environmental problems caused by the long-term dependence of shipping traffic on heavy fossil fuels,it is an irreversible development trend for electrified ships to integrate large-capacity battery energy storage systems(ESSs).As the main component,the shipboard lithium-ion battery(LIB)plays an important role in the operation of ship power system to balance the source and load sides.By analyzing the effects of temperature,vibration,humidity and salt spray on battery characteristics in the shipping environment,this paper points out that the characteristics of shipboard LIB have certain differences on the state changes with the land-based batteries.Then,this paper systematically reviews the most commonly used LIB modeling and state estimation methods and their applicability to the shipping environment,including the empirical models,electrochemical models,equivalent circuit models(ECMs)and data-driven models.On this basis,the state estimation methods of state of charge(SOC),state of power(SOP),state of health(SOH),state of energy(SOE)and state of temperature(SOT)are reviewed.Finally,the challenges and prospects of shipboard LIB research are prospected,in the hope of providing inspiration for the development and design of efficient and safe electric ships.
基金supported by the Natural Science Foundation of China(No.52377221,62172448)the Natural Science Foundation of Hunan Province,China(No.2023JJ30698)+1 种基金Part of the work is supported by the research project“COBALT-P”(16BZF314C)funded by the German Federal Ministry for Economic Affairs and Climate Action(BMWK).Lisen Yan is supported by China Scholarship Council(Grant No.202206370146).
文摘The hysteresis effect represents the difference in open circuit voltage(OCV)between the charge and discharge processes of batteries.An accurate estimation of open circuit voltage considering hysteresis is critical for precise modeling of LiFePO_(4)batteries.However,the intricate influence of state-of-charge(SOC),temperature,and battery aging have posed significant challenges for hysteresis modeling,which have not been comprehensively considered in existing studies.This paper proposes a data-driven approach with adversarial learning to model hysteresis under diverse conditions,addressing the intricate dependencies on SOC,temperature,and battery aging.First,a comprehensive experimental scheme is designed to collect hysteresis dataset under diverse SOC paths,temperatures and aging states.Second,the proposed data-driven model integrates a conditional generative adversarial network with long short-term memory networks to enhance the model’s accuracy and adaptability.The generator and discriminator are designed based on LSTM networks to capture the dependency of hysteresis on historical SOC and conditional information.Third,the conditional matrix,incorporating temperature,health state,and historical paths,is constructed to provide the scenario-specific information for the adversarial network,thereby enhancing the model’s adaptability.Experimental results demonstrate that the proposed model achieves a voltage error of less than 3.8 mV across various conditions,with accuracy improvements of 31.3–48.7%compared to three state-of-the-art models.
基金This work is supported in part by Open Fund of State Key Laboratory of Operation and Control of Renewable Energy&Storage Systems(DGB51201700424)Industrial Innovation of Jilin Province Development and Reform Commission(2017C017-2)Jilin Provincial“13th Five-Year Plan”Science and Technology Project([2016]88).
文摘Modeling and state of charge(SOC)estimation of Lithium cells are crucial techniques of the lithium battery management system.The modeling is extremely complicated as the operating status of lithium battery is affected by temperature,current,cycle number,discharge depth and other factors.This paper studies the modeling of lithium iron phosphate battery based on the Thevenin’s equivalent circuit and a method to identify the open circuit voltage,resistance and capacitance in the model is proposed.To improve the accuracy of the lithium battery model,a capacity estimation algorithm considering the capacity loss during the battery’s life cycle.In addition,this paper solves the SOC estimation issue of the lithium battery caused by the uncertain noise using the extended Kalman filtering(EKF)algorithm.A simulation model of actual lithium batteries is designed in Matlab/Simulink and the simulation results verify the accuracy of the model under different operating modes.
