The batch dyeing process is a typical nonlinear process with time-delay,where precise controlling of temperature plays a vital role on the dyeing quality.Because the accuracy and robustness of the commonly used propor...The batch dyeing process is a typical nonlinear process with time-delay,where precise controlling of temperature plays a vital role on the dyeing quality.Because the accuracy and robustness of the commonly used proportion integration differentiation(PID) algorithm had been limited,a novel method was developed to precisely control the heating and cooling stages for batch dyeing process based on predictive sliding mode control(SMC) algorithm.Firstly,a special predictive sliding mode model was constructed according to the principle of generalized predictive control(GPC);secondly,an appropriate reference trajectory for SMC was designed based on the improved approaching law;finally,the predictive sliding mode model and the Diophantine equation were used to predict the output and then the optimized control law was derived using the generalized predictive law.This method combined GPC and the SMC with their respective advantages,so it could be applied to time-delay process,making the control system more robust.Simulation experiments show that this algorithm can well track the temperature variation for the batch dyeing process.展开更多
Adsorption kinetics in multi-component systems has been a subject of intensive research because it is of both theoretical and practical importance. In this paper, raw date palm seeds （RDPS） were investigated to asse...Adsorption kinetics in multi-component systems has been a subject of intensive research because it is of both theoretical and practical importance. In this paper, raw date palm seeds （RDPS） were investigated to assess the possible use of this raw material as an effective adsorbent for the removal of sulfate from aqueous solution. The influence of various parameters such as sulfate initial concentration, pH, adsorbent dose and stirring time has been studied for the adsorption of sulfate in batch mode. Effects of foreign anions on the adsorption of sulfate onto RDPS have been also investigated. The pseudo-second-order, Elovich and intraparticle diffusion kinetic models have been developed to predict the rate constants of adsorption and equilibrium capacities. The maximum adsorption capacity of sulfate （qe ≈3.2 mg/g） onto RDPS was reached for the initial sulfate concentration = 100 mg/L, pH - 3.5, adsorbent dose = 10 g/L and for a stirring intensity = 200 rpm at 25 ± 2 ℃. The results showed that the adsorption of sulfate onto this raw materials followed pseudo-second-order rate kinetic predicting a chemisorption process.展开更多
The study of the performances of regenerated activated carbons for the adsorption of MO(methyl orange)in an aqueous medium was carried out with the aim to evaluate the adsorption capacities of these activated carbons....The study of the performances of regenerated activated carbons for the adsorption of MO(methyl orange)in an aqueous medium was carried out with the aim to evaluate the adsorption capacities of these activated carbons.Three regenerated activated carbons issued from the unit of oil treatment of the thermal power station of Dibamba(Cameroon)-DPDC(Dibamba Power Development Company)were obtained thermally and chemically.These three samples(namely CAR 400℃(chemical regenerated activated carbon at 400℃),CAR 700℃(physical regenerated activated carbon at 700℃)and CAR 900℃(physical regenerated activated carbon at 900℃))and the non-used one CA were characterized by iodine number,XRD(X-ray Diffraction)and FTIR(Fourier-transform infrared spectroscopy).MO adsorption tests were performed in batch mode;this technique allowed the study of the influence of the parameters such as:the contact time,the initial’s MO concentration and the pH.Moreover,different kinetic models(first-order,pseudo-second-order and Webber and Morris intra-particle diffusion)and adsorption isotherms(Langmuir and Freundlich)are used for the evaluation of adsorption capacities.The physicochemical characterization of these adsorbents showed that they were micro-porous(iodine value:600 mg/g)and strongly crystallized according to their regeneration pathways.The influence of the parameters revealed that the adsorption of MO is the most favorable for concentrations from 5 to 25 mg/L(for materials CA and CAR 400℃)and 10 to 25 g/L(for materials CAR 700℃ and 900℃);and that it was maximum in acid medium(at pH=3 on the materials CA,CAR 400℃,CAR 900℃ and at pH=5 on the material CAR 900℃).The modeling of the adsorption kinetics of MO has revealed the conformity of the kinetic model of pseudosecond-order and intra-particle diffusion for some of these materials.The study of isotherms has shown that the Langmuir isotherm best describes the adsorption of MO on most of these adsorbents.展开更多
The new mode of operation for slop cut withdrawal in batch distillation, i.e., draining column liquid holdup at the end of slop cut period, was proposed. And the stopping criterion for the operation was investigated. ...The new mode of operation for slop cut withdrawal in batch distillation, i.e., draining column liquid holdup at the end of slop cut period, was proposed. And the stopping criterion for the operation was investigated. Experiments were carried out with isopropanol-n-propanol binary system and isopropanol-n-propanol-n-butanol ternary system in a distillation column with a liquid collector installed between the reboiler and the column section. Experimental results in a 45mm batch column show that the proposed policy can overcome the flywheel effect caused by column liquid holdup and thus cut down operation time and energy consumption 31%—61%.展开更多
Nitrogen removal from synthetic wastewater was investigated in an airlift bioreactor （ALB）, augmented with a novel heterotrophic nitrifier Pseudonocardia ammonioxydans H9^T under organic carbon to nitrogen ratios （...Nitrogen removal from synthetic wastewater was investigated in an airlift bioreactor （ALB）, augmented with a novel heterotrophic nitrifier Pseudonocardia ammonioxydans H9^T under organic carbon to nitrogen ratios （Corg/N） ranging from 0 to 12. Effect of the inoculated strain was also determined on the settling properties and the removal of chemical oxygen demand （COD）. Two laboratory scale reactors were set up to achieve a stable nitrifying state under the same physicochemical conditions of hydraulic retention time （HRT）, temperature, pH and dissolved oxygen （DO）, and operated under the sequencing batch mode. The level of DO was kept at 0.5- 1.5 mg/L by periodic stirring and aeration. Each specific Corg/N ratio was continued for duration of 3 weeks. One of the reactors （BR2） was inoculated with P ammonioxydans H9^T periodically at the start of each Corg/N ratio. Sludge volumetric index （SVI） improved with the increasing Corg/N ratio, but no significant difference was detected between the two reactors. BR2 showed higher levels of nitrogen removal with the increasing heterotrophic conditions, and the ammonia removal reached to the level of 82%-88%, up to10% higher than that in the control reactor （BR1） at Corg/N ratios higher than 6; however, the ammonia removal level in experimental reactor was up to 8% lower than that in control reactor at Corg/N ratios lower than 2. The COD removal efficiency progressively increased with the increasing Corg/N ratios in both of the reactors. The COD removal percentage up to peak values of 88%-94% in BR2, up to 11% higher than that in BR1 at Corg/N ratio higher than 4. The peak values of ammonia and COD removal almost coincided with the highest number （18%-27% to total bacterial number） of the exogenous bacterium in the BR2, detected as colony forming units （CFU）. Furthermore, the removal of ammonia and COD in BR2 was closely related to the number of the inoculated strain with a coefficient index （R2） up to 0.82 and 0.85 for ammonia and COD, respectively. These results suggest that it was more efficient for both the ammonia and carbon nutrient removals in a reactor inoculated with a heterotrophic nitrifier at high Corg/N ratio, inferring that the heterotrophic nitrifers would be practically more available in the treatment of wastewater with high level of ammonia and COD.展开更多
基金National Natural Science Foundation of China(No.61074154)
文摘The batch dyeing process is a typical nonlinear process with time-delay,where precise controlling of temperature plays a vital role on the dyeing quality.Because the accuracy and robustness of the commonly used proportion integration differentiation(PID) algorithm had been limited,a novel method was developed to precisely control the heating and cooling stages for batch dyeing process based on predictive sliding mode control(SMC) algorithm.Firstly,a special predictive sliding mode model was constructed according to the principle of generalized predictive control(GPC);secondly,an appropriate reference trajectory for SMC was designed based on the improved approaching law;finally,the predictive sliding mode model and the Diophantine equation were used to predict the output and then the optimized control law was derived using the generalized predictive law.This method combined GPC and the SMC with their respective advantages,so it could be applied to time-delay process,making the control system more robust.Simulation experiments show that this algorithm can well track the temperature variation for the batch dyeing process.
文摘Adsorption kinetics in multi-component systems has been a subject of intensive research because it is of both theoretical and practical importance. In this paper, raw date palm seeds （RDPS） were investigated to assess the possible use of this raw material as an effective adsorbent for the removal of sulfate from aqueous solution. The influence of various parameters such as sulfate initial concentration, pH, adsorbent dose and stirring time has been studied for the adsorption of sulfate in batch mode. Effects of foreign anions on the adsorption of sulfate onto RDPS have been also investigated. The pseudo-second-order, Elovich and intraparticle diffusion kinetic models have been developed to predict the rate constants of adsorption and equilibrium capacities. The maximum adsorption capacity of sulfate （qe ≈3.2 mg/g） onto RDPS was reached for the initial sulfate concentration = 100 mg/L, pH - 3.5, adsorbent dose = 10 g/L and for a stirring intensity = 200 rpm at 25 ± 2 ℃. The results showed that the adsorption of sulfate onto this raw materials followed pseudo-second-order rate kinetic predicting a chemisorption process.
文摘The study of the performances of regenerated activated carbons for the adsorption of MO(methyl orange)in an aqueous medium was carried out with the aim to evaluate the adsorption capacities of these activated carbons.Three regenerated activated carbons issued from the unit of oil treatment of the thermal power station of Dibamba(Cameroon)-DPDC(Dibamba Power Development Company)were obtained thermally and chemically.These three samples(namely CAR 400℃(chemical regenerated activated carbon at 400℃),CAR 700℃(physical regenerated activated carbon at 700℃)and CAR 900℃(physical regenerated activated carbon at 900℃))and the non-used one CA were characterized by iodine number,XRD(X-ray Diffraction)and FTIR(Fourier-transform infrared spectroscopy).MO adsorption tests were performed in batch mode;this technique allowed the study of the influence of the parameters such as:the contact time,the initial’s MO concentration and the pH.Moreover,different kinetic models(first-order,pseudo-second-order and Webber and Morris intra-particle diffusion)and adsorption isotherms(Langmuir and Freundlich)are used for the evaluation of adsorption capacities.The physicochemical characterization of these adsorbents showed that they were micro-porous(iodine value:600 mg/g)and strongly crystallized according to their regeneration pathways.The influence of the parameters revealed that the adsorption of MO is the most favorable for concentrations from 5 to 25 mg/L(for materials CA and CAR 400℃)and 10 to 25 g/L(for materials CAR 700℃ and 900℃);and that it was maximum in acid medium(at pH=3 on the materials CA,CAR 400℃,CAR 900℃ and at pH=5 on the material CAR 900℃).The modeling of the adsorption kinetics of MO has revealed the conformity of the kinetic model of pseudosecond-order and intra-particle diffusion for some of these materials.The study of isotherms has shown that the Langmuir isotherm best describes the adsorption of MO on most of these adsorbents.
文摘The new mode of operation for slop cut withdrawal in batch distillation, i.e., draining column liquid holdup at the end of slop cut period, was proposed. And the stopping criterion for the operation was investigated. Experiments were carried out with isopropanol-n-propanol binary system and isopropanol-n-propanol-n-butanol ternary system in a distillation column with a liquid collector installed between the reboiler and the column section. Experimental results in a 45mm batch column show that the proposed policy can overcome the flywheel effect caused by column liquid holdup and thus cut down operation time and energy consumption 31%—61%.
基金This work was supported by the National Natural Science Foundation of China （No. 30470024）.
文摘Nitrogen removal from synthetic wastewater was investigated in an airlift bioreactor （ALB）, augmented with a novel heterotrophic nitrifier Pseudonocardia ammonioxydans H9^T under organic carbon to nitrogen ratios （Corg/N） ranging from 0 to 12. Effect of the inoculated strain was also determined on the settling properties and the removal of chemical oxygen demand （COD）. Two laboratory scale reactors were set up to achieve a stable nitrifying state under the same physicochemical conditions of hydraulic retention time （HRT）, temperature, pH and dissolved oxygen （DO）, and operated under the sequencing batch mode. The level of DO was kept at 0.5- 1.5 mg/L by periodic stirring and aeration. Each specific Corg/N ratio was continued for duration of 3 weeks. One of the reactors （BR2） was inoculated with P ammonioxydans H9^T periodically at the start of each Corg/N ratio. Sludge volumetric index （SVI） improved with the increasing Corg/N ratio, but no significant difference was detected between the two reactors. BR2 showed higher levels of nitrogen removal with the increasing heterotrophic conditions, and the ammonia removal reached to the level of 82%-88%, up to10% higher than that in the control reactor （BR1） at Corg/N ratios higher than 6; however, the ammonia removal level in experimental reactor was up to 8% lower than that in control reactor at Corg/N ratios lower than 2. The COD removal efficiency progressively increased with the increasing Corg/N ratios in both of the reactors. The COD removal percentage up to peak values of 88%-94% in BR2, up to 11% higher than that in BR1 at Corg/N ratio higher than 4. The peak values of ammonia and COD removal almost coincided with the highest number （18%-27% to total bacterial number） of the exogenous bacterium in the BR2, detected as colony forming units （CFU）. Furthermore, the removal of ammonia and COD in BR2 was closely related to the number of the inoculated strain with a coefficient index （R2） up to 0.82 and 0.85 for ammonia and COD, respectively. These results suggest that it was more efficient for both the ammonia and carbon nutrient removals in a reactor inoculated with a heterotrophic nitrifier at high Corg/N ratio, inferring that the heterotrophic nitrifers would be practically more available in the treatment of wastewater with high level of ammonia and COD.
