This study proposes a method for analyzing the security distance of an Active Distribution Network(ADN)by incorporating the demand response of an Energy Hub(EH).Taking into account the impact of stochastic wind-solar ...This study proposes a method for analyzing the security distance of an Active Distribution Network(ADN)by incorporating the demand response of an Energy Hub(EH).Taking into account the impact of stochastic wind-solar power and flexible loads on the EH,an interactive power model was developed to represent the EH’s operation under these influences.Additionally,an ADN security distance model,integrating an EH with flexible loads,was constructed to evaluate the effect of flexible load variations on the ADN’s security distance.By considering scenarios such as air conditioning(AC)load reduction and base station(BS)load transfer,the security distances of phases A,B,and C increased by 17.1%,17.2%,and 17.7%,respectively.Furthermore,a multi-objective optimal power flow model was formulated and solved using the Forward-Backward Power Flow Algorithm,the NSGA-II multi-objective optimization algo-rithm,and the maximum satisfaction method.The simulation results of the IEEE33 node system example demonstrate that after opti-mization,the total energy cost for one day is reduced by 0.026%,and the total security distance limit of the ADN’s three phases is improved by 0.1 MVA.This method effectively enhances the security distance,facilitates BS load transfer and AC load reduction,and contributes to the energy-saving,economical,and safe operation of the power system.展开更多
Since distribution sector is inherent into high amount of failures, distribution companies (DISCOs) are responsible of attaining an acceptable value for the reliability indices and otherwise they will face up to compl...Since distribution sector is inherent into high amount of failures, distribution companies (DISCOs) are responsible of attaining an acceptable value for the reliability indices and otherwise they will face up to complaints. So they are usually obligated by regulators to invest on reliability improvement of network. But this investment on reliability is usually from the DISCO’s viewpoint and is also irrespective of customer satisfaction level. In other words, customers are not at the same level of sensitivity to interruptions but DISCO improves the reliability of network without considering the differences in importance degree of loads and their level of reliability requirement. On the other hand DISCOs attempt to reduce their investment costs as much as possible. This paper introduces a novel approach in the field of joint switch placement that can reduce the switch cost from the perspective of asset management policies. To this end, two switch placement plannings in different types of strategies are performed to compare their results. Firstly as witch placement is performed based on reducing the total energy not supplied (ENS) of the system. Then by revising the strategy, a fuzzy switch placement is performed from the DISCO’s point of view which just considers the total ENS of load points most sensitive to interruptions known as important or critical loads. Furthermore, by meeting the related constraints, the reliability of low sensitive customers is disregarded. This is a load importance based planning which can result in switch cost reduction relative to the amount achieved in previous strategy and implies the management of risks associated with reliability and respective constraint. Fuzzy method and new switching mechanism in fuzzy environment of network are implemented to modeling and controlling the risks associated to ENS of critical loads and also the ENS of system.展开更多
The relation between the implementation time of small reactor and its market was studied if small reactor could be implemented to be utilized as a base load operation. If the small reactors with 100 or 50 MWe could be...The relation between the implementation time of small reactor and its market was studied if small reactor could be implemented to be utilized as a base load operation. If the small reactors with 100 or 50 MWe could be implemented from 2020, the potential countries could be selected from the view point of the estimated total electricity consumption in 2020 and the stability of the electrical grid system. The commercialization of small reactors should be best done early because the market for these power units as a base load operation might be reduced due to the increase of the electricity consumption in the future after 2020. The implementation program of small reactors for the district heating and electricity supply in Mongolia, which is one of the countries having the interests in small reactor, was investigated and the future implementation plan was proposed too. In order to reduce the air pollution by coal fired heating system, there is an urgent need to start the discussion for the utilization of nuclear district heating reactor in Ulaanbaatar.展开更多
Due to different latitudes and variation of altitude in geographical areas in Iran,the climatic conditions of Iran are such that the variations of the heating degree-days(HDD)are in a broad range of 60 to 3000 for res...Due to different latitudes and variation of altitude in geographical areas in Iran,the climatic conditions of Iran are such that the variations of the heating degree-days(HDD)are in a broad range of 60 to 3000 for residential buildings in different climatic regions.In addition,in many cases,the building design and construction processes follow patterns which do not necessarily meet national energy requirements and standards.Based on these two reasons,it is essential to identify the current status of energy consumption indicators in residential buildings.That way,it gets more convenient to adopt new strategies to improve the current state of energy consumption of buildings.In this study,heating energy consumption indices of residential buildings is investigated.Using the combination of the results of statistical data analysis,questionnaires,filled in for 500 buildings,and a reference building simulation in different climates of Iran,the heating atlas of residential buildings was prepared.According to the results,the average heating energy index(HE1)of buildings in Iran can be less than 1 to more than 41.3(m^(3)(N.G)/(m^(2)-yr))depending on climatic conditions and building design and construction quality.However,in the coldest center of province,the average of this index is 26.3(m^(3)(N.G)/(m^(2)-yr))in the hottest one that is equal 2.2.The variations of the thermal base load(supply of hot water)varied from less than 13.12 to more than 378.84(m^(3)(N.G)/(person-yr)).In provincial capitals,the lowest thermal base load index(TBLI)of buildings is 24.78 and the highest is 226.49(m^(3)(N.G)/(person-yr)).In this paper,beside charts and tables,results of heating energy consumption indices are also presented in the form of graphical atlases,i.e.color contour plots,to deliver a better picture of the whole country.展开更多
基金supported in part by the National Nat-ural Science Foundation of China(No.51977012,No.52307080).
文摘This study proposes a method for analyzing the security distance of an Active Distribution Network(ADN)by incorporating the demand response of an Energy Hub(EH).Taking into account the impact of stochastic wind-solar power and flexible loads on the EH,an interactive power model was developed to represent the EH’s operation under these influences.Additionally,an ADN security distance model,integrating an EH with flexible loads,was constructed to evaluate the effect of flexible load variations on the ADN’s security distance.By considering scenarios such as air conditioning(AC)load reduction and base station(BS)load transfer,the security distances of phases A,B,and C increased by 17.1%,17.2%,and 17.7%,respectively.Furthermore,a multi-objective optimal power flow model was formulated and solved using the Forward-Backward Power Flow Algorithm,the NSGA-II multi-objective optimization algo-rithm,and the maximum satisfaction method.The simulation results of the IEEE33 node system example demonstrate that after opti-mization,the total energy cost for one day is reduced by 0.026%,and the total security distance limit of the ADN’s three phases is improved by 0.1 MVA.This method effectively enhances the security distance,facilitates BS load transfer and AC load reduction,and contributes to the energy-saving,economical,and safe operation of the power system.
文摘Since distribution sector is inherent into high amount of failures, distribution companies (DISCOs) are responsible of attaining an acceptable value for the reliability indices and otherwise they will face up to complaints. So they are usually obligated by regulators to invest on reliability improvement of network. But this investment on reliability is usually from the DISCO’s viewpoint and is also irrespective of customer satisfaction level. In other words, customers are not at the same level of sensitivity to interruptions but DISCO improves the reliability of network without considering the differences in importance degree of loads and their level of reliability requirement. On the other hand DISCOs attempt to reduce their investment costs as much as possible. This paper introduces a novel approach in the field of joint switch placement that can reduce the switch cost from the perspective of asset management policies. To this end, two switch placement plannings in different types of strategies are performed to compare their results. Firstly as witch placement is performed based on reducing the total energy not supplied (ENS) of the system. Then by revising the strategy, a fuzzy switch placement is performed from the DISCO’s point of view which just considers the total ENS of load points most sensitive to interruptions known as important or critical loads. Furthermore, by meeting the related constraints, the reliability of low sensitive customers is disregarded. This is a load importance based planning which can result in switch cost reduction relative to the amount achieved in previous strategy and implies the management of risks associated with reliability and respective constraint. Fuzzy method and new switching mechanism in fuzzy environment of network are implemented to modeling and controlling the risks associated to ENS of critical loads and also the ENS of system.
文摘The relation between the implementation time of small reactor and its market was studied if small reactor could be implemented to be utilized as a base load operation. If the small reactors with 100 or 50 MWe could be implemented from 2020, the potential countries could be selected from the view point of the estimated total electricity consumption in 2020 and the stability of the electrical grid system. The commercialization of small reactors should be best done early because the market for these power units as a base load operation might be reduced due to the increase of the electricity consumption in the future after 2020. The implementation program of small reactors for the district heating and electricity supply in Mongolia, which is one of the countries having the interests in small reactor, was investigated and the future implementation plan was proposed too. In order to reduce the air pollution by coal fired heating system, there is an urgent need to start the discussion for the utilization of nuclear district heating reactor in Ulaanbaatar.
文摘Due to different latitudes and variation of altitude in geographical areas in Iran,the climatic conditions of Iran are such that the variations of the heating degree-days(HDD)are in a broad range of 60 to 3000 for residential buildings in different climatic regions.In addition,in many cases,the building design and construction processes follow patterns which do not necessarily meet national energy requirements and standards.Based on these two reasons,it is essential to identify the current status of energy consumption indicators in residential buildings.That way,it gets more convenient to adopt new strategies to improve the current state of energy consumption of buildings.In this study,heating energy consumption indices of residential buildings is investigated.Using the combination of the results of statistical data analysis,questionnaires,filled in for 500 buildings,and a reference building simulation in different climates of Iran,the heating atlas of residential buildings was prepared.According to the results,the average heating energy index(HE1)of buildings in Iran can be less than 1 to more than 41.3(m^(3)(N.G)/(m^(2)-yr))depending on climatic conditions and building design and construction quality.However,in the coldest center of province,the average of this index is 26.3(m^(3)(N.G)/(m^(2)-yr))in the hottest one that is equal 2.2.The variations of the thermal base load(supply of hot water)varied from less than 13.12 to more than 378.84(m^(3)(N.G)/(person-yr)).In provincial capitals,the lowest thermal base load index(TBLI)of buildings is 24.78 and the highest is 226.49(m^(3)(N.G)/(person-yr)).In this paper,beside charts and tables,results of heating energy consumption indices are also presented in the form of graphical atlases,i.e.color contour plots,to deliver a better picture of the whole country.
