The most prevalent issue in physical therapy is pain. Due to the subjective nature of pain, assessment tools are essential in understanding it as objective data. However, assessment of pain may result in distress for ...The most prevalent issue in physical therapy is pain. Due to the subjective nature of pain, assessment tools are essential in understanding it as objective data. However, assessment of pain may result in distress for the patient. A physical therapist (PT) should conduct these tests as quickly and accurately as possible. Straightforward instructions are vital in such cases. This study aimed to clarify the effect of verbal instructions for pain assessment during a passive straight leg raise (PSLR) test for participants with chronic low back pain (CLBP). This study included 22 participants who provided informed consent and received three consecutive PSLR tests with measurement of the hip flexion range of motion (HFROM) and were instructed to cease the test at submaximal pain before the first test. Following the second and third tests, participants were given specific verbal instructions to remember pain intensity, quality, and location. After each test, participants were to circle the pain location on the body chart and rate their pain intensity on a numeric rating scale (NRS) and pain quality. All participants were then interviewed about the differences between having and not having specific verbal instructions. The results of HFROM, NRS, and pain extent were not significantly different between the first and second tests or between the second and third tests using a paired t-test. Eleven changes in pain location were found in the second test compared to those in the first test. In the third test, only three participants circled a different area than in the second test. Ten participants showed similar changes with pain location in pain quality in the three PSLR tests. This study revealed the effect of specific verbal instructions prior to PSLR tests. Particularly, participants could notice exact pain location. Our findings may help PT to understand pain cause and reduce patients’ stress during pain assessment in clinical settings.展开更多
The spring-back of a bending metal tube was studied through extensive experiments and finite element method （FEM） analysis. An approximate equation for the spring-back angle of bending was deduced. It is noted that ...The spring-back of a bending metal tube was studied through extensive experiments and finite element method （FEM） analysis. An approximate equation for the spring-back angle of bending was deduced. It is noted that the mechanical properties of the material （in a tubular form） are quite different from those found in the standard tensile tests （when the materials are in bar forms）. This is one of the major reasons that result in the discrepancies in the outcomes of experimental study, FEM calculations, and spring-back analysis. It is therefore of crucial importance to study the mechanical properties of the materials in their tubular forms. The experiments and FEM simulations prove that the spring-back angle is significantly affected by the mechanical properties of the materials. The angle decreases accordingly with plastic modulus, but changes inversely with the hardening index and elastic modulus The spring-back angle is also affected by the conditions of tube deformation： it increases accordingly with the relative bending radius but changes inversely with the relative wall thickness. In addition, the spring-back angle increases nonlinearly with the bending angle.展开更多
For investigating the back pressure characteristics of turbine channel of an external-parallel turbine-based combined cycle(TBCC)inlet during the mode transition with the freestream air Mach number of 1.8,wind tunnel ...For investigating the back pressure characteristics of turbine channel of an external-parallel turbine-based combined cycle(TBCC)inlet during the mode transition with the freestream air Mach number of 1.8,wind tunnel tests and numerical simulations are carried out.The results show that the critical back pressure of the turbine channel decreases linearly with the decrease of the open degree of splitter plate.The turbine channel has self-starting capacity when the open degree of the turbine channel is 100%.The total pressure recovery coefficient increases with the increase of back pressure when turbine channel is at supercritical and critical state.The mass capture ratio,total pressure recovery coefficient and outlet pressure ratio decrease obviously when turbine channel is at subcritical state.Results of the research would provide scheme reference and technology storage for TBCC propulsion evolution.展开更多
文摘The most prevalent issue in physical therapy is pain. Due to the subjective nature of pain, assessment tools are essential in understanding it as objective data. However, assessment of pain may result in distress for the patient. A physical therapist (PT) should conduct these tests as quickly and accurately as possible. Straightforward instructions are vital in such cases. This study aimed to clarify the effect of verbal instructions for pain assessment during a passive straight leg raise (PSLR) test for participants with chronic low back pain (CLBP). This study included 22 participants who provided informed consent and received three consecutive PSLR tests with measurement of the hip flexion range of motion (HFROM) and were instructed to cease the test at submaximal pain before the first test. Following the second and third tests, participants were given specific verbal instructions to remember pain intensity, quality, and location. After each test, participants were to circle the pain location on the body chart and rate their pain intensity on a numeric rating scale (NRS) and pain quality. All participants were then interviewed about the differences between having and not having specific verbal instructions. The results of HFROM, NRS, and pain extent were not significantly different between the first and second tests or between the second and third tests using a paired t-test. Eleven changes in pain location were found in the second test compared to those in the first test. In the third test, only three participants circled a different area than in the second test. Ten participants showed similar changes with pain location in pain quality in the three PSLR tests. This study revealed the effect of specific verbal instructions prior to PSLR tests. Particularly, participants could notice exact pain location. Our findings may help PT to understand pain cause and reduce patients’ stress during pain assessment in clinical settings.
文摘The spring-back of a bending metal tube was studied through extensive experiments and finite element method （FEM） analysis. An approximate equation for the spring-back angle of bending was deduced. It is noted that the mechanical properties of the material （in a tubular form） are quite different from those found in the standard tensile tests （when the materials are in bar forms）. This is one of the major reasons that result in the discrepancies in the outcomes of experimental study, FEM calculations, and spring-back analysis. It is therefore of crucial importance to study the mechanical properties of the materials in their tubular forms. The experiments and FEM simulations prove that the spring-back angle is significantly affected by the mechanical properties of the materials. The angle decreases accordingly with plastic modulus, but changes inversely with the hardening index and elastic modulus The spring-back angle is also affected by the conditions of tube deformation： it increases accordingly with the relative bending radius but changes inversely with the relative wall thickness. In addition, the spring-back angle increases nonlinearly with the bending angle.
文摘For investigating the back pressure characteristics of turbine channel of an external-parallel turbine-based combined cycle(TBCC)inlet during the mode transition with the freestream air Mach number of 1.8,wind tunnel tests and numerical simulations are carried out.The results show that the critical back pressure of the turbine channel decreases linearly with the decrease of the open degree of splitter plate.The turbine channel has self-starting capacity when the open degree of the turbine channel is 100%.The total pressure recovery coefficient increases with the increase of back pressure when turbine channel is at supercritical and critical state.The mass capture ratio,total pressure recovery coefficient and outlet pressure ratio decrease obviously when turbine channel is at subcritical state.Results of the research would provide scheme reference and technology storage for TBCC propulsion evolution.
