A rotary sealing device that automatically compensates for wear is designed to address the issues of easy wear and the short service life of the rotary sealing device with automatic wear compensation in mining machine...A rotary sealing device that automatically compensates for wear is designed to address the issues of easy wear and the short service life of the rotary sealing device with automatic wear compensation in mining machinery.After the end face of the guide sleeve wears out,it still tightly adheres to the sealing valve seat under the pressure difference,achieving automatic wear compensation.Based on fluid-solid coupling technology,the structural strength of the rotary sealing device was checked.The influence of factors on the sealing performance of rotary sealing devices was studied using the control variable method.The results show that as the pressure of water increases,the leakage rate of the sealing device decreases,and after 30 MPa,the leakage rate is almost 0 mL/h.The temperature of the rotating sealing device increases with the increase of rotation speed or pressure,and the temperature is more affected by the rotation speed factor.The frictional torque increases with increasing pressure and is independent of rotational speed.Comprehensive analysis shows that the wear resistance and reliability level of the sealing guide sleeve material is PVDF>PEEK>PE>PA.This study designs a high-pressure automatic compensation wear rotary sealing device and selects the optimal sealing material,providing technical support for the application of high-pressure water jet in mining machinery.展开更多
An experiment of two-stage adaptive compensation for polarization mode dispersion (PMD) iu a 40-Gb/s optical time-division multiplexed communication system is reported. The PMD monitoring technique based on degree of ...An experiment of two-stage adaptive compensation for polarization mode dispersion (PMD) iu a 40-Gb/s optical time-division multiplexed communication system is reported. The PMD monitoring technique based on degree of polarization was adopted. The particle swarm optimization (PSO) algorithm was introduced in adaptive PMD compensation. The comparison was made to estimate the effectiveness between PSO algorithms with global neighborhood structure (GPSO) and with local neighborhood structure (LPSO). The LPSO algorithm is shown to be more effective to search global optimum for PMD compensation than GPSO algorithm. The two-stage PMD compensator is shown to be effective for both first- and second-order PMD, and he compensator is shown to be bit rate independent. The optimum searching time is within one huudred milliseconds.展开更多
Parts of complex surface are widely used now in many fields, and their detection has caused much concern. In China many manufactories still carry on the traditional way of manual detection, which requires highly skill...Parts of complex surface are widely used now in many fields, and their detection has caused much concern. In China many manufactories still carry on the traditional way of manual detection, which requires highly skilled personnel and efficiency is low. Some large manufactories have imported auto-detecting equipments, which require CAD data on the parts, or just divide the surface into several approximate planes for automatic detection. Phased-array system is seldom used, and the cost is high. Besides, most of the systems have not considered the automatic sensitivity compensation of parts with varying thickness. To improve the detection quality and efficiency of nondestructive test (NDT) of parts of complex surface, this paper puts forward an integrated ultrasonic NDT system characterized by: (1) Use of ultrasonic measurement and reverse of curved surface to solve the CAD data problem; (2) Use of an automatic sensitivity compensation algorithm (based on the part’s modelling information obtained in surface reverse) to fit the variety of the thickness; (3) Use of template matching and pseudo-color imaging to improve the quality of detection results. The system features integration of low cost mature technologies, and is suitable for detection of various parts of different complex surfaces in medium-and-small enterprises. The test results showed that the system can automatically detect parts of complex surface successfully, and that the inspection result is good and reliable.展开更多
We have studied the algorithm for the automatic chromatic dispersion compensation using bit error rate (BER) and Q-factor optimization for realization of dynamically reconfigurable all-optical .network. We have made s...We have studied the algorithm for the automatic chromatic dispersion compensation using bit error rate (BER) and Q-factor optimization for realization of dynamically reconfigurable all-optical .network. We have made sure good performance using the compensation system by laboratory experiments.展开更多
The output amplitude of the differential circuit is studied for differential discrimination in pulsed laser time-offlight systems. Based on the studies of the probability of detection and the probability of false alar...The output amplitude of the differential circuit is studied for differential discrimination in pulsed laser time-offlight systems. Based on the studies of the probability of detection and the probability of false alarms, the minimum detectable input signal of differential discrimination can be calculated. The results indicate that the differential discrimination detectability of the small signal will be reduced. A combined discrimination is proposed in this Letter to improve the time resolution of the large signal and ensure the probability of detection of the small signal at the same time. A proper value of the circuit parameter is found to balance the time resolutions of the small and large signals.展开更多
基金Supported by Jiangsu Provincial Natural Science Foundation(Grant No.BK20231497)Jiangsu Provincial Post graduate Research&Practice Innovation Program(Grant No.KYCX25_2982)+3 种基金China University of Mining and Technology Graduate Innovation Program(Grant No.2025WLKXJ094)National Natural Science Foundation of China(Grant No.51975573)National Key R&D Program of China(Grant No.2022YFC2905600)Priority Academic Program Development of Jiangsu Higher Education Institute of China.
文摘A rotary sealing device that automatically compensates for wear is designed to address the issues of easy wear and the short service life of the rotary sealing device with automatic wear compensation in mining machinery.After the end face of the guide sleeve wears out,it still tightly adheres to the sealing valve seat under the pressure difference,achieving automatic wear compensation.Based on fluid-solid coupling technology,the structural strength of the rotary sealing device was checked.The influence of factors on the sealing performance of rotary sealing devices was studied using the control variable method.The results show that as the pressure of water increases,the leakage rate of the sealing device decreases,and after 30 MPa,the leakage rate is almost 0 mL/h.The temperature of the rotating sealing device increases with the increase of rotation speed or pressure,and the temperature is more affected by the rotation speed factor.The frictional torque increases with increasing pressure and is independent of rotational speed.Comprehensive analysis shows that the wear resistance and reliability level of the sealing guide sleeve material is PVDF>PEEK>PE>PA.This study designs a high-pressure automatic compensation wear rotary sealing device and selects the optimal sealing material,providing technical support for the application of high-pressure water jet in mining machinery.
文摘An experiment of two-stage adaptive compensation for polarization mode dispersion (PMD) iu a 40-Gb/s optical time-division multiplexed communication system is reported. The PMD monitoring technique based on degree of polarization was adopted. The particle swarm optimization (PSO) algorithm was introduced in adaptive PMD compensation. The comparison was made to estimate the effectiveness between PSO algorithms with global neighborhood structure (GPSO) and with local neighborhood structure (LPSO). The LPSO algorithm is shown to be more effective to search global optimum for PMD compensation than GPSO algorithm. The two-stage PMD compensator is shown to be effective for both first- and second-order PMD, and he compensator is shown to be bit rate independent. The optimum searching time is within one huudred milliseconds.
文摘Parts of complex surface are widely used now in many fields, and their detection has caused much concern. In China many manufactories still carry on the traditional way of manual detection, which requires highly skilled personnel and efficiency is low. Some large manufactories have imported auto-detecting equipments, which require CAD data on the parts, or just divide the surface into several approximate planes for automatic detection. Phased-array system is seldom used, and the cost is high. Besides, most of the systems have not considered the automatic sensitivity compensation of parts with varying thickness. To improve the detection quality and efficiency of nondestructive test (NDT) of parts of complex surface, this paper puts forward an integrated ultrasonic NDT system characterized by: (1) Use of ultrasonic measurement and reverse of curved surface to solve the CAD data problem; (2) Use of an automatic sensitivity compensation algorithm (based on the part’s modelling information obtained in surface reverse) to fit the variety of the thickness; (3) Use of template matching and pseudo-color imaging to improve the quality of detection results. The system features integration of low cost mature technologies, and is suitable for detection of various parts of different complex surfaces in medium-and-small enterprises. The test results showed that the system can automatically detect parts of complex surface successfully, and that the inspection result is good and reliable.
文摘We have studied the algorithm for the automatic chromatic dispersion compensation using bit error rate (BER) and Q-factor optimization for realization of dynamically reconfigurable all-optical .network. We have made sure good performance using the compensation system by laboratory experiments.
文摘The output amplitude of the differential circuit is studied for differential discrimination in pulsed laser time-offlight systems. Based on the studies of the probability of detection and the probability of false alarms, the minimum detectable input signal of differential discrimination can be calculated. The results indicate that the differential discrimination detectability of the small signal will be reduced. A combined discrimination is proposed in this Letter to improve the time resolution of the large signal and ensure the probability of detection of the small signal at the same time. A proper value of the circuit parameter is found to balance the time resolutions of the small and large signals.
