The mechanical properties of Mg–Al–Ca alloys are significantly affected by their Laves phases,including the Al_(2)Ca phase.Laves phases are generally considered to be brittle and have a detrimental effect on the duc...The mechanical properties of Mg–Al–Ca alloys are significantly affected by their Laves phases,including the Al_(2)Ca phase.Laves phases are generally considered to be brittle and have a detrimental effect on the ductility of Mg.Recently,the Al_(2)Ca phase was shown to undergo plastic deformation in a dilute Mg-Al-Ca alloy to increase the ductility and work hardening of the alloy.In the present study,we investigated the extent to which the deformation of Al_(2)Ca is driven by dislocations in the Mg matrix by simulating the interactions between the basal edge dislocations and Al_(2)Ca particles.In particular,the effects of the interparticle spacing,particle orientation,and particle size were considered.Shearing of small particles and dislocation cross-slips near large particles were observed.Both events contribute to strengthening,and accommodate to plasticity.The shear resistance of the dislocation to bypass the particles increased as the particle size increased.The critical resolved shear stress(CRSS)for activating dislocations and stacking faults was easier to reach for small Al_(2)Ca particles owing to the higher local shear stress,which is consistent with the experimental observations.Overall,this work elucidates the driving force for Al_(2)Ca particles in Mg–Al–Ca alloys to undergo plastic deformation.展开更多
Porous materials are widely used in the field of protection because of their excellent energy absorption characteristics.In this work,a series of polyurethane microscopic models are established and the effect of poros...Porous materials are widely used in the field of protection because of their excellent energy absorption characteristics.In this work,a series of polyurethane microscopic models are established and the effect of porosity on the shock waves is studied with classical molecular dynamics simulations.Firstly,shock Hugoniot relations for different porosities are obtained,which compare well with the experimental data.The pores collapse and form local stress wave,which results in the complex multi-wave structure of the shock wave.The microstructure analysis shows that the local stress increases and the local velocity decreases gradually during the process of pore collapse to complete compaction.Finally,it leads to stress relaxation and velocity homogenization.The shock stress peaks can be fitted with two exponential functions,and the amplitude of attenuation coefficient decreases with the increase of density.Besides,the pore collapse under shock or non-shock are discussed by the entropy increase rate of the system.The energy is dissipated mainly through the multiple interactions of the waves under shock.The energy is dissipated mainly by the friction between atoms under non-shock.展开更多
MicroMagnetic.jl is an open-source Julia package for micromagnetic and atomistic simulations.Using the features of the Julia programming language,MicroMagnetic.jl supports CPU and various GPU platforms,including NVIDI...MicroMagnetic.jl is an open-source Julia package for micromagnetic and atomistic simulations.Using the features of the Julia programming language,MicroMagnetic.jl supports CPU and various GPU platforms,including NVIDIA,AMD,Intel,and Apple GPUs.Moreover,MicroMagnetic.jl supports Monte Carlo simulations for atomistic models and implements the nudged-elastic-band method for energy barrier computations.With built-in support for double and single precision modes and a design allowing easy extensibility to add new features,MicroMagnetic.jl provides a versatile toolset for researchers in micromagnetics and atomistic simulations.展开更多
Molecular dynamics （MD） simulations of monocrystalline copper （100） surface during nanomachining process were performed based on a new 3D simulation model. The material removal mechanism and system temperature dis...Molecular dynamics （MD） simulations of monocrystalline copper （100） surface during nanomachining process were performed based on a new 3D simulation model. The material removal mechanism and system temperature distribution were discussed. The simulation results indicate that the system temperature distribution presents a roughly concentric shape, a steep temperature gradient is observed in diamond cutting tool, and the highest temperature is located in chip. Centrosymmetry parameter method was used to monitor defect structures. Dislocations and vacancies are the two principal types of defect structures. Residual defect structures impose a major change on the workpiece physical properties and machined surface quality. The defect structures in workpiece are temperature dependent. As the temperature increases, the dislocations are mainly mediated from the workpiece surface, while the others are dissociated into point defects. The relatively high cutting speed used in nanomachining results in less defect structures, beneficial to obtain highly machined surface quality.展开更多
Deformation twinning, i.e., twin nucleation and twin growth （or twin boundary migration, TBM） activated by impinged basal slip at a symmetrical tilt grain boundary in HCP Mg, was examined with molecular dynamics （M...Deformation twinning, i.e., twin nucleation and twin growth （or twin boundary migration, TBM） activated by impinged basal slip at a symmetrical tilt grain boundary in HCP Mg, was examined with molecular dynamics （MD） simulations. The results show that the {1^-1^-21}-type twinning acts as the most preferential mode of twinning. Once such twins are formed, they are almost ready to grow. The TBM of such twins is led by pure atomic shuffling events. A secondary mode of twinning can also occur in our simulations. The {112^-2} twinning is observed at 10 K as the secondary twin. This secondary mode of twinning shows different energy barriers for nucleation as well as for growth compared with the {1^-1^-21}-type twining. In particular, TBMs in this case is triggered intrinsically by pyramidal slip at its twin boundary.展开更多
The phenomenon of interfacial fracture, as manifested by atom- istic cleavage, debonding and dislocation emission, provides a challenge for combined atomistic-continuum analysis. As a precursor for fully coupled atomi...The phenomenon of interfacial fracture, as manifested by atom- istic cleavage, debonding and dislocation emission, provides a challenge for combined atomistic-continuum analysis. As a precursor for fully coupled atomistic-continuum simulation of interfacial fracture, we focus here on the atomistic behavior within a nanoscopic core surrounding the crack tip. The inter-atomic potential under Em- bedded Atom Method is recapitulated to form an essential framework of atomistic simulation. The calculations are performed for a side-cracked disc configuration un- der a remote K field loading. It is revealed that a critical loading rate defines the brittle-to-ductile transition of homogeneous materials. We further observe that the near tip mode mixity dictates the nanoscopic profile near an interfacial crack tip. A zigzag interface structure is simulated which plays a significant role in the dislocation emission from an interfacial crack tip, as will be explored in the second part of this investigation.展开更多
How to correctly extract Cauchy stress from the atomistic simulations is a crucial issue in studying the mechanical behaviours of atomic systems, but is still in controversy. In this paper, three typical atomistic sim...How to correctly extract Cauchy stress from the atomistic simulations is a crucial issue in studying the mechanical behaviours of atomic systems, but is still in controversy. In this paper, three typical atomistic simulation examples are used to validate various existing stress definitions. It is found that the classical virial stress fails in predicting the stresses in these examples, because the velocity depends on the choice of the local average volume or the reference frame velocity and other factors. In contrast, the Lagrangian cross-section stress and Lagrangian virial stress are validated by these examples, and the instantaneous Lagrangian atomic stress definition is also proposed for dynamical problems.展开更多
The deformation behavior in magnesium single crystal under c-axis tension is investigated in a temperature range between 250 K and 570 K by molecular dynamics simulations. At a low temperature, twinning and shear band...The deformation behavior in magnesium single crystal under c-axis tension is investigated in a temperature range between 250 K and 570 K by molecular dynamics simulations. At a low temperature, twinning and shear bands are found to be the main deformation mechanisms. In particular, the {102} tension twins with the reorientation angle of about 90 °are observed in the simulations. The mechanisms of {102} twinning are illustrated by the simulated motion of atoms. Moreover, grain nucleation and growth are found to be accompanied with the {102} twinning. At temperatures above 450 K, the twin frequency decreases with increasing temperature. The {102} extension twin almost disappears at the temperature of 570 K. The non-basal slip plays an important role on the tensile deformation in magnesium single crystal at high temperatures.展开更多
Free transverse vibration of monolayer graphene, boron nitride (BN), and silicon carbide (SiC) sheets is investigated by using molecular dynamics finite element method. Eigenfrequencies and eigenmodes of these three s...Free transverse vibration of monolayer graphene, boron nitride (BN), and silicon carbide (SiC) sheets is investigated by using molecular dynamics finite element method. Eigenfrequencies and eigenmodes of these three sheets in rectangular shape are studied with different aspect ratios with respect to various boundary conditions. It is found that aspect ratios and boundary conditions affect in a similar way on natural frequencies of graphene, BN, and SiC sheets. Natural frequencies in all modes decrease with an increase of the sheet’s size. Graphene exhibits the highest natural frequencies, and SiC sheet possesses the lowest ones. Missing atoms have minor effects on natural frequencies in this study.展开更多
We investigate the mechanical and microstructural changes of the densified silica glass under uniaxial loading-unloading via atomistic simulations with a modified BKS potential. The stress–strain relationship is foun...We investigate the mechanical and microstructural changes of the densified silica glass under uniaxial loading-unloading via atomistic simulations with a modified BKS potential. The stress–strain relationship is found to include three respective stages: elastic, plastic and hardening regions. The bulk modulus increases with the initial densification and will undergo a rapid increase after complete densification. The yield pressure varies from 5 to 12 GPa for different densified samples. In addition, the Si–O–Si bond angle reduces during elastic deformation under compression, and 5-fold Si will increase linearly in the plastic deformation. In the hardening region, the peak splitting and the new peak are both found on the Si–Si and O–O pair radial distribution functions, where the 6-fold Si is increased. Instead, the lateral displacement of the atoms always varies linearly with strain, without evident periodic characteristic. As is expected, the samples are permanently densified after release from the plastic region, and the maximum density of recovered samples is about 2.64 g/cm^3, which contains 15 % 5-fold Si, and the Si–O–Si bond angle is less than the ordinary silica glass. All these findings are of great significance for understanding the deformation process of densified silica glass.展开更多
The interactions of He with dissociated screw dislocations in face-centered-cubic （fcc） Ni are investigated by using molecular dynamics simulations based on an embedded-atom method model. The binding and formation e...The interactions of He with dissociated screw dislocations in face-centered-cubic （fcc） Ni are investigated by using molecular dynamics simulations based on an embedded-atom method model. The binding and formation energies of interstitial He in and near Shockley partial cores are calculated. The results show that interstitial He atoms at tetrahedral sites in the perfect fee lattice and atoms occupying sites one plane above or below one of the two Shockley partial cores exhibit the strongest binding energy. The attractive or repulsive nature of the interaction between interstitial He and the screw dislocation depends on the relative position of He to these strong binding sites. In addition, the effect of He on the dissociation of screw dislocations are investigated. It is found that Fie atoms homogeneously distributed in the glide plane can reduce the stacking fault width.展开更多
As one of the fundamental outcomes of dislocation self-interaction,dislocation dipoles have an important influence on the plastic deformation of materials,especially on fatigue and creep.In this work,superdislocation ...As one of the fundamental outcomes of dislocation self-interaction,dislocation dipoles have an important influence on the plastic deformation of materials,especially on fatigue and creep.In this work,superdislocation dipoles inγ-TiAl andα_(2)-Ti_(3)Al were systematically investigated by atomistic simulations,with a variety of dipole heights,orientations and annealing tempe ratures.The results indicate that non-screw super-dipoles transform into locally stable dipolar or reconstructed cores at low temperature,while into isolated or interconnected point defect clusters and stacking fault tetrahedra at high temperature via short-range diffu sion.Non-screw super-dipoles inγ-TiAl andα_(2)-Ti_(3)Al exhibit similar features as fcc and hcp metals,respectively.Generally,over long-term annealing where diffusion is significant,60°superdipoles inγ-TiAl are stable,whereas the stability of super-dipoles inα2-Ti3 Al increases with dipole height and orientation angle.The influence on mechanical properties can be well evaluated by integrating these results into mesoscale or constitutive models.展开更多
A set of potential parameters for modeling zircon was obtained by atomistic simulation techniques and a reasonable structural model of zircon was established by fitting some important properties of zircon.Based on the...A set of potential parameters for modeling zircon was obtained by atomistic simulation techniques and a reasonable structural model of zircon was established by fitting some important properties of zircon.Based on the equilibrium configuration of zircon, authors calculated the formation energies of basic point defects and intrinsic disorders. The heats of solution of substituting Pu for Zr showed that there was an immiscible gap at the composition of (Pu75%-Zr25%, in mole fraction), which suggests that the amount of Pu substituting for Zr in zircon be≤50%.展开更多
The embedded atom type potentials and static relaxation method combined with a steepest decent computational technique have been used to simulate the interaction between the grain boundary (GB) and dislocations in Ni_...The embedded atom type potentials and static relaxation method combined with a steepest decent computational technique have been used to simulate the interaction between the grain boundary (GB) and dislocations in Ni_3Al alloys.The focus has been placed on the energy feature of the interaction,the distortion of GB structural units,and the dislocation core structure near the GB.Im- plication has also been made on the results for the understanding of the mechanism responsible for B-enhanced ductility.展开更多
Atomistic simulations are carried out to investigate the nano-indentation of single crystal Cu and the sliding of the Cu-Zn alloy.As the contact zone is extended due to adhesive interaction between the contact atoms,t...Atomistic simulations are carried out to investigate the nano-indentation of single crystal Cu and the sliding of the Cu-Zn alloy.As the contact zone is extended due to adhesive interaction between the contact atoms,the contact area on a nanoscale is redefined.A comparison of contact area and contact force between molecular dynamics(MD)and contact theory based on Greenwood-Williamson(GW)model is made.Lower roughness causes the adhesive interaction to weaken,showing the better consistency between the calculated results by MD and those from the theoretical model.The simulations of the sliding show that the substrate wear decreases with the mol%of Zn increasing,due to the fact that the diffusion movements of Zn atoms in substrate are blocked during the sliding because of the hexagonal close packed(hcp)structure of Zn.展开更多
Pronounced compositional fluctuations in CrMnFeCoNi high-entropy alloys(HEAs)lead to variations of the stacking-fault energy(SFE),which dominates the dislocation behavior and mechanical properties.However,studies on t...Pronounced compositional fluctuations in CrMnFeCoNi high-entropy alloys(HEAs)lead to variations of the stacking-fault energy(SFE),which dominates the dislocation behavior and mechanical properties.However,studies on the underlying dislocation behaviors and deformation mechanisms as a function of composition(Cr/Ni ratio)within CrMnFeCoNi HEAs are largely lacking,which hinders further understanding of the composition-structure-property relationships for the rational design of HEAs.Atomistic simulations were employed in this study to investigate the core structures and dynamic behaviors of a/2<110>edge dislocations in non-equiatomic CrMnFeCoNi HEA,as well as its plasticity mechanisms.The results show that the core structure of a/2<110>edge dislocations is planar after energy minimization,but with significant variations in the separation distance between two partial dislocations along the dislocation line owing to the complex local composition.The effects of the Cr/Ni ratio on the dislocation-solute interactions during dislocation gliding were calculated and discussed.Additionally,snapshots of dislocation motion under shear stress were analyzed.The observations indicate that the strengthening of the non-equiatomic CrMnFeCoNi HEA with increasing Cr concentration is not contributed by the expected solute/dislocation interactions,but the observed events of edge extended dislocation climbing through jog nucleation.The unusual but reasonable dislocation climbing phenomenon and the resultant strengthening observed in this study open extraordinary opportunities for obtaining outstanding mechanical properties in non-equiatomic CrMnFeCoNi HEAs by tailoring the compositional variations.展开更多
Grain boundary(GB)segregation substantially influences the mechanical properties and performance of magnesium(Mg).Atomic-scale modeling,typically using ab-initio or semi-empirical approaches,has mainly focused on GB s...Grain boundary(GB)segregation substantially influences the mechanical properties and performance of magnesium(Mg).Atomic-scale modeling,typically using ab-initio or semi-empirical approaches,has mainly focused on GB segregation at highly symmetric GBs in Mg alloys,often failing to capture the diversity of local atomic environments and segregation energies,resulting in inaccurate structure-property predictions.This study employs atomistic simulations and machine learning models to systematically investigate the segregation behavior of common solute elements in polycrystalline Mg at both 0 K and finite temperatures.The machine learning models accurately predict segregation thermodynamics by incorporating energetic and structural descriptors.We found that segregation energy and vibrational free energy follow skew-normal distributions,with hydrostatic stress,an indicator of excess free volume,emerging as an important factor influencing segregation tendency.The local atomic environment's flexibility,quantified by flexibility volume,is also crucial in predicting GB segregation.Comparing the grain boundary solute concentrations calculated via the Langmuir-Mc Lean isotherm with experimental data,we identified a pronounced segregation tendency for Nd,highlighting its potential for GB engineering in Mg alloys.This work demonstrates the powerful synergy of atomistic simulations and machine learning,paving the way for designing advanced lightweight Mg alloys with tailored properties.展开更多
Atomistic simulation has been performed to investigate the dynamical and defect properties of multiferroic hexagonal YMnO3 with newly developed interaction potentials.Dynamical calculation reveals that phonon vibratio...Atomistic simulation has been performed to investigate the dynamical and defect properties of multiferroic hexagonal YMnO3 with newly developed interaction potentials.Dynamical calculation reveals that phonon vibrations of hexagonal YMnO_(3)are quite different from those of orthorhombic YMnO_(3).Defect calculation finds that O Frenkel is the most probable intrinsic disorder,and Mn antisite defect is favorable to exist,especially for Mn ions entering the Y2 sites.It is also found that holes prefer to localize at O^(2-)sites rather than at Mn^(3+)sites,while the electron can be localized at the Mn^(3+)site.The disproportionation of Mn3+ions is unlikely to occur in hexagonal YMnO_(3).展开更多
Understanding the processes of protein adsorption/desorption on nanopartieles＇ surfaces is important for the development of new nanotechnology involving biomaterials; however, an atomistic resolution picture for thes...Understanding the processes of protein adsorption/desorption on nanopartieles＇ surfaces is important for the development of new nanotechnology involving biomaterials; however, an atomistic resolution picture for these processes and for the simultaneous protein conformational change is missing. Here, we report the adsorption of protein GB 1 on a polystyrene nanoparticle surface using atomistic molecular dynamic simulations. Enabled by metadynamics, we explored the relevant phase space and identified three protein states, each involving both the adsorbed and desorbed modes. We also studied the change of the secondary and tertiary structures of GB 1 during adsorption and the dominant interactions between the protein and surface in different adsorption stages. The results we obtained from simulation were found to be more adequate and complete than the previous one. We believe the model presented in this paper, in comparison with the previous ones, is a better theoretical model to understand and explain the experimental results.展开更多
Calcium carbonate(CaCO_(3))is a crucial mineral with great scientific relevance in biomineralization and geoscience.However,excessive precipitation of CaCO_(3)is posing a threat to industrial production and the aquati...Calcium carbonate(CaCO_(3))is a crucial mineral with great scientific relevance in biomineralization and geoscience.However,excessive precipitation of CaCO_(3)is posing a threat to industrial production and the aquatic environment.The utilization of chemical inhibitors is typically considered an economical and successful route for addressing the scaling issues,while the underlying mechanism is still debated and needs to be further investigated.In this context,a deep understanding of the crystallization process of CaCO_(3)and how the inhibitors interact with CaCO_(3)nuclei and crystals are of great significance in evaluating the performance of scale inhibitors.In recent years,with the rapid development of computing facilities,computer simulations have provided an atomic-level perspective on the kinetics and thermodynamics of possible association events in CaCO_(3)solutions as well as the predictions of nucleation pathway and growth mechanism of CaCO_(3)crystals as a complement to experiment.This review surveys several computational methods and their achievements in this field with a focus on analyzing the functional mechanisms of different types of inhibitors.A general discussion of the current challenges and future directions in applying atomistic simulations to the discovery,design,and development of more effective water-scale inhibitors is also discussed.展开更多
基金funded by the National Natural Science Foundation of China(nos.51631006 and 51825101)。
文摘The mechanical properties of Mg–Al–Ca alloys are significantly affected by their Laves phases,including the Al_(2)Ca phase.Laves phases are generally considered to be brittle and have a detrimental effect on the ductility of Mg.Recently,the Al_(2)Ca phase was shown to undergo plastic deformation in a dilute Mg-Al-Ca alloy to increase the ductility and work hardening of the alloy.In the present study,we investigated the extent to which the deformation of Al_(2)Ca is driven by dislocations in the Mg matrix by simulating the interactions between the basal edge dislocations and Al_(2)Ca particles.In particular,the effects of the interparticle spacing,particle orientation,and particle size were considered.Shearing of small particles and dislocation cross-slips near large particles were observed.Both events contribute to strengthening,and accommodate to plasticity.The shear resistance of the dislocation to bypass the particles increased as the particle size increased.The critical resolved shear stress(CRSS)for activating dislocations and stacking faults was easier to reach for small Al_(2)Ca particles owing to the higher local shear stress,which is consistent with the experimental observations.Overall,this work elucidates the driving force for Al_(2)Ca particles in Mg–Al–Ca alloys to undergo plastic deformation.
基金financial support from National Natural Science Foundation of China(Grant No.12172325)。
文摘Porous materials are widely used in the field of protection because of their excellent energy absorption characteristics.In this work,a series of polyurethane microscopic models are established and the effect of porosity on the shock waves is studied with classical molecular dynamics simulations.Firstly,shock Hugoniot relations for different porosities are obtained,which compare well with the experimental data.The pores collapse and form local stress wave,which results in the complex multi-wave structure of the shock wave.The microstructure analysis shows that the local stress increases and the local velocity decreases gradually during the process of pore collapse to complete compaction.Finally,it leads to stress relaxation and velocity homogenization.The shock stress peaks can be fitted with two exponential functions,and the amplitude of attenuation coefficient decreases with the increase of density.Besides,the pore collapse under shock or non-shock are discussed by the entropy increase rate of the system.The energy is dissipated mainly through the multiple interactions of the waves under shock.The energy is dissipated mainly by the friction between atoms under non-shock.
基金supported by the National Key R&D Program of China(Grant No.2022YFA1403603)the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB33030100)+2 种基金the National Natural Science Fund for Distinguished Young Scholar(Grant No.52325105)the National Natural Science Foundation of China(Grant Nos.12374098,11974021,and 12241406)the CAS Project for Young Scientists in Basic Research(Grant No.YSBR-084).
文摘MicroMagnetic.jl is an open-source Julia package for micromagnetic and atomistic simulations.Using the features of the Julia programming language,MicroMagnetic.jl supports CPU and various GPU platforms,including NVIDIA,AMD,Intel,and Apple GPUs.Moreover,MicroMagnetic.jl supports Monte Carlo simulations for atomistic models and implements the nudged-elastic-band method for energy barrier computations.With built-in support for double and single precision modes and a design allowing easy extensibility to add new features,MicroMagnetic.jl provides a versatile toolset for researchers in micromagnetics and atomistic simulations.
基金Project (50925521) supported by the National Natural Science Fund for Distinguished Young Scholars of China
文摘Molecular dynamics （MD） simulations of monocrystalline copper （100） surface during nanomachining process were performed based on a new 3D simulation model. The material removal mechanism and system temperature distribution were discussed. The simulation results indicate that the system temperature distribution presents a roughly concentric shape, a steep temperature gradient is observed in diamond cutting tool, and the highest temperature is located in chip. Centrosymmetry parameter method was used to monitor defect structures. Dislocations and vacancies are the two principal types of defect structures. Residual defect structures impose a major change on the workpiece physical properties and machined surface quality. The defect structures in workpiece are temperature dependent. As the temperature increases, the dislocations are mainly mediated from the workpiece surface, while the others are dissociated into point defects. The relatively high cutting speed used in nanomachining results in less defect structures, beneficial to obtain highly machined surface quality.
基金Project(2012CB932202)supported by the National Basic Research Program of ChinaProjects(50890174,50971088)supported by the National Natural Science Foundation of China
文摘Deformation twinning, i.e., twin nucleation and twin growth （or twin boundary migration, TBM） activated by impinged basal slip at a symmetrical tilt grain boundary in HCP Mg, was examined with molecular dynamics （MD） simulations. The results show that the {1^-1^-21}-type twinning acts as the most preferential mode of twinning. Once such twins are formed, they are almost ready to grow. The TBM of such twins is led by pure atomic shuffling events. A secondary mode of twinning can also occur in our simulations. The {112^-2} twinning is observed at 10 K as the secondary twin. This secondary mode of twinning shows different energy barriers for nucleation as well as for growth compared with the {1^-1^-21}-type twining. In particular, TBMs in this case is triggered intrinsically by pyramidal slip at its twin boundary.
基金The project supported by the National Natural Science Foundation of China
文摘The phenomenon of interfacial fracture, as manifested by atom- istic cleavage, debonding and dislocation emission, provides a challenge for combined atomistic-continuum analysis. As a precursor for fully coupled atomistic-continuum simulation of interfacial fracture, we focus here on the atomistic behavior within a nanoscopic core surrounding the crack tip. The inter-atomic potential under Em- bedded Atom Method is recapitulated to form an essential framework of atomistic simulation. The calculations are performed for a side-cracked disc configuration un- der a remote K field loading. It is revealed that a critical loading rate defines the brittle-to-ductile transition of homogeneous materials. We further observe that the near tip mode mixity dictates the nanoscopic profile near an interfacial crack tip. A zigzag interface structure is simulated which plays a significant role in the dislocation emission from an interfacial crack tip, as will be explored in the second part of this investigation.
基金supported by the National Natural Science Foundation of China (Grant Nos10702034,10732050 and 90816006)the National Basic Research Program of China (973 Program 2007CB936803,2010CB832701)
文摘How to correctly extract Cauchy stress from the atomistic simulations is a crucial issue in studying the mechanical behaviours of atomic systems, but is still in controversy. In this paper, three typical atomistic simulation examples are used to validate various existing stress definitions. It is found that the classical virial stress fails in predicting the stresses in these examples, because the velocity depends on the choice of the local average volume or the reference frame velocity and other factors. In contrast, the Lagrangian cross-section stress and Lagrangian virial stress are validated by these examples, and the instantaneous Lagrangian atomic stress definition is also proposed for dynamical problems.
基金supported by National Natural Science Foundation of China (GrantNos.11072026 and 10632020)the Fundamental Research Funds for the Central Universities, and finalized during a sabbatical leave of D.S. at the Graduate Institute of Ferrous Technology (G.I.F.T.) of POSTECHPohang, Korea as part of an International Outgoing Fellowship (Marie Curie Actions) of the 7th Programme of the European Commission
文摘The deformation behavior in magnesium single crystal under c-axis tension is investigated in a temperature range between 250 K and 570 K by molecular dynamics simulations. At a low temperature, twinning and shear bands are found to be the main deformation mechanisms. In particular, the {102} tension twins with the reorientation angle of about 90 °are observed in the simulations. The mechanisms of {102} twinning are illustrated by the simulated motion of atoms. Moreover, grain nucleation and growth are found to be accompanied with the {102} twinning. At temperatures above 450 K, the twin frequency decreases with increasing temperature. The {102} extension twin almost disappears at the temperature of 570 K. The non-basal slip plays an important role on the tensile deformation in magnesium single crystal at high temperatures.
文摘Free transverse vibration of monolayer graphene, boron nitride (BN), and silicon carbide (SiC) sheets is investigated by using molecular dynamics finite element method. Eigenfrequencies and eigenmodes of these three sheets in rectangular shape are studied with different aspect ratios with respect to various boundary conditions. It is found that aspect ratios and boundary conditions affect in a similar way on natural frequencies of graphene, BN, and SiC sheets. Natural frequencies in all modes decrease with an increase of the sheet’s size. Graphene exhibits the highest natural frequencies, and SiC sheet possesses the lowest ones. Missing atoms have minor effects on natural frequencies in this study.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51727807 and 11875318)Beijing Institute of Technology Research Fund Program for Young ScholarsYue Qi Young Scholar Project in CUMTB。
文摘We investigate the mechanical and microstructural changes of the densified silica glass under uniaxial loading-unloading via atomistic simulations with a modified BKS potential. The stress–strain relationship is found to include three respective stages: elastic, plastic and hardening regions. The bulk modulus increases with the initial densification and will undergo a rapid increase after complete densification. The yield pressure varies from 5 to 12 GPa for different densified samples. In addition, the Si–O–Si bond angle reduces during elastic deformation under compression, and 5-fold Si will increase linearly in the plastic deformation. In the hardening region, the peak splitting and the new peak are both found on the Si–Si and O–O pair radial distribution functions, where the 6-fold Si is increased. Instead, the lateral displacement of the atoms always varies linearly with strain, without evident periodic characteristic. As is expected, the samples are permanently densified after release from the plastic region, and the maximum density of recovered samples is about 2.64 g/cm^3, which contains 15 % 5-fold Si, and the Si–O–Si bond angle is less than the ordinary silica glass. All these findings are of great significance for understanding the deformation process of densified silica glass.
基金Supported by the Program of International S&T Cooperation under Grant No 2014DFG60230the Strategically Leading Program of the Chinese Academy of Sciences under Grant No XDA02040100+1 种基金the Shanghai Municipal Science and Technology Commission under Grant No 13ZR1448000the National Natural Science Foundation of China under Grant No 11505266
文摘The interactions of He with dissociated screw dislocations in face-centered-cubic （fcc） Ni are investigated by using molecular dynamics simulations based on an embedded-atom method model. The binding and formation energies of interstitial He in and near Shockley partial cores are calculated. The results show that interstitial He atoms at tetrahedral sites in the perfect fee lattice and atoms occupying sites one plane above or below one of the two Shockley partial cores exhibit the strongest binding energy. The attractive or repulsive nature of the interaction between interstitial He and the screw dislocation depends on the relative position of He to these strong binding sites. In addition, the effect of He on the dissociation of screw dislocations are investigated. It is found that Fie atoms homogeneously distributed in the glide plane can reduce the stacking fault width.
基金the National Key Research and Development Program of China(No.2016YFB0701304 and 2017YFB0306201)the Natural Science Foundation of China(Nos.51671195 and 91960202)+4 种基金the Frontier and Key Projects of the Chinese Academy of Sciences(Nos.QYZDJ-SSW-JSC031-01 and XXH13506-304)the Natural Science Foundation of Liaoning(No.20180510032)the Aeronautical Science Foundation of China(No.20160292002)the Strategic Priority Research Program of Chinese Academy of Sciences(No.XDC01000000)The Project is sponsored by the“Liaoning BaiQianWan”Talents Program。
文摘As one of the fundamental outcomes of dislocation self-interaction,dislocation dipoles have an important influence on the plastic deformation of materials,especially on fatigue and creep.In this work,superdislocation dipoles inγ-TiAl andα_(2)-Ti_(3)Al were systematically investigated by atomistic simulations,with a variety of dipole heights,orientations and annealing tempe ratures.The results indicate that non-screw super-dipoles transform into locally stable dipolar or reconstructed cores at low temperature,while into isolated or interconnected point defect clusters and stacking fault tetrahedra at high temperature via short-range diffu sion.Non-screw super-dipoles inγ-TiAl andα_(2)-Ti_(3)Al exhibit similar features as fcc and hcp metals,respectively.Generally,over long-term annealing where diffusion is significant,60°superdipoles inγ-TiAl are stable,whereas the stability of super-dipoles inα2-Ti3 Al increases with dipole height and orientation angle.The influence on mechanical properties can be well evaluated by integrating these results into mesoscale or constitutive models.
文摘A set of potential parameters for modeling zircon was obtained by atomistic simulation techniques and a reasonable structural model of zircon was established by fitting some important properties of zircon.Based on the equilibrium configuration of zircon, authors calculated the formation energies of basic point defects and intrinsic disorders. The heats of solution of substituting Pu for Zr showed that there was an immiscible gap at the composition of (Pu75%-Zr25%, in mole fraction), which suggests that the amount of Pu substituting for Zr in zircon be≤50%.
文摘The embedded atom type potentials and static relaxation method combined with a steepest decent computational technique have been used to simulate the interaction between the grain boundary (GB) and dislocations in Ni_3Al alloys.The focus has been placed on the energy feature of the interaction,the distortion of GB structural units,and the dislocation core structure near the GB.Im- plication has also been made on the results for the understanding of the mechanism responsible for B-enhanced ductility.
基金Project supported by the National Key Research and Development Program of China(Grant No.2018YFC0808800)the Natural Science Foundation of Jiangsu Higher Education Institutions,China(Grant No.17KJA460002)the“Six Talent Peaks”of Jiangsu Province,China(Grant No.GDZB-002)。
文摘Atomistic simulations are carried out to investigate the nano-indentation of single crystal Cu and the sliding of the Cu-Zn alloy.As the contact zone is extended due to adhesive interaction between the contact atoms,the contact area on a nanoscale is redefined.A comparison of contact area and contact force between molecular dynamics(MD)and contact theory based on Greenwood-Williamson(GW)model is made.Lower roughness causes the adhesive interaction to weaken,showing the better consistency between the calculated results by MD and those from the theoretical model.The simulations of the sliding show that the substrate wear decreases with the mol%of Zn increasing,due to the fact that the diffusion movements of Zn atoms in substrate are blocked during the sliding because of the hexagonal close packed(hcp)structure of Zn.
基金supported by the National Natural Science Foundation of China(No.52275352)the National Key Research and Development Program of China(No.2022YFB3706902)Inner Mongolia-SJTU Science and Technology Cooperation Special Project(No.2023XYJG0001-01-01).
文摘Pronounced compositional fluctuations in CrMnFeCoNi high-entropy alloys(HEAs)lead to variations of the stacking-fault energy(SFE),which dominates the dislocation behavior and mechanical properties.However,studies on the underlying dislocation behaviors and deformation mechanisms as a function of composition(Cr/Ni ratio)within CrMnFeCoNi HEAs are largely lacking,which hinders further understanding of the composition-structure-property relationships for the rational design of HEAs.Atomistic simulations were employed in this study to investigate the core structures and dynamic behaviors of a/2<110>edge dislocations in non-equiatomic CrMnFeCoNi HEA,as well as its plasticity mechanisms.The results show that the core structure of a/2<110>edge dislocations is planar after energy minimization,but with significant variations in the separation distance between two partial dislocations along the dislocation line owing to the complex local composition.The effects of the Cr/Ni ratio on the dislocation-solute interactions during dislocation gliding were calculated and discussed.Additionally,snapshots of dislocation motion under shear stress were analyzed.The observations indicate that the strengthening of the non-equiatomic CrMnFeCoNi HEA with increasing Cr concentration is not contributed by the expected solute/dislocation interactions,but the observed events of edge extended dislocation climbing through jog nucleation.The unusual but reasonable dislocation climbing phenomenon and the resultant strengthening observed in this study open extraordinary opportunities for obtaining outstanding mechanical properties in non-equiatomic CrMnFeCoNi HEAs by tailoring the compositional variations.
基金Z.X.and T.A.S.acknowledge the financial support by the German Research Foundation(DFG)(Grant Nr.505716422)T.A.S.are grateful for the financial support from the DFG(Grant Nr.AL1343/7-1,AL1343/8-1 and Yi 103/3-1)+4 种基金Z.X.,S.K.K.and U.K.acknowledge financial support by the DFG through the projects A05,A07 and C02 of the SFB1394 StructuralChemical Atomic Complexity-From Defect Phase Diagrams to Material Properties,project ID 409476157Additionally,Z.X.and S.K.K.are grateful for funding from the European Research Council(ERC)under the European Union’s Horizon 2020 research and innovation program(grant agreement No.852096 FunBlocks)J.G.acknowledges funding from the French National Research Agency(ANR),Grant ANR-21-CE08-0001(ATOUUM)and ANR-22-CE92-0058-01(SILA)The authors gratefully acknowledge the computing time provided to them at the NHR Center NHR4CES at RWTH Aachen University(project number p0020431 and p0020267)。
文摘Grain boundary(GB)segregation substantially influences the mechanical properties and performance of magnesium(Mg).Atomic-scale modeling,typically using ab-initio or semi-empirical approaches,has mainly focused on GB segregation at highly symmetric GBs in Mg alloys,often failing to capture the diversity of local atomic environments and segregation energies,resulting in inaccurate structure-property predictions.This study employs atomistic simulations and machine learning models to systematically investigate the segregation behavior of common solute elements in polycrystalline Mg at both 0 K and finite temperatures.The machine learning models accurately predict segregation thermodynamics by incorporating energetic and structural descriptors.We found that segregation energy and vibrational free energy follow skew-normal distributions,with hydrostatic stress,an indicator of excess free volume,emerging as an important factor influencing segregation tendency.The local atomic environment's flexibility,quantified by flexibility volume,is also crucial in predicting GB segregation.Comparing the grain boundary solute concentrations calculated via the Langmuir-Mc Lean isotherm with experimental data,we identified a pronounced segregation tendency for Nd,highlighting its potential for GB engineering in Mg alloys.This work demonstrates the powerful synergy of atomistic simulations and machine learning,paving the way for designing advanced lightweight Mg alloys with tailored properties.
基金supported by the National Natural Science Foundation of China (Grant Nos. U0734001 and 50772054)the Ministry of Science and Technology of China (Grant No. 2009CB929202)
文摘Atomistic simulation has been performed to investigate the dynamical and defect properties of multiferroic hexagonal YMnO3 with newly developed interaction potentials.Dynamical calculation reveals that phonon vibrations of hexagonal YMnO_(3)are quite different from those of orthorhombic YMnO_(3).Defect calculation finds that O Frenkel is the most probable intrinsic disorder,and Mn antisite defect is favorable to exist,especially for Mn ions entering the Y2 sites.It is also found that holes prefer to localize at O^(2-)sites rather than at Mn^(3+)sites,while the electron can be localized at the Mn^(3+)site.The disproportionation of Mn3+ions is unlikely to occur in hexagonal YMnO_(3).
基金supported by the National Natural Science Foundation of China(Grant Nos.11774158,11274157,31671026,and 11334004)the National Basic Research and Development Program of China(Grant No.2013CB834100)Priority Academic Program Development(PAPD)Project of Jiangsu Higher Education Institutions
文摘Understanding the processes of protein adsorption/desorption on nanopartieles＇ surfaces is important for the development of new nanotechnology involving biomaterials; however, an atomistic resolution picture for these processes and for the simultaneous protein conformational change is missing. Here, we report the adsorption of protein GB 1 on a polystyrene nanoparticle surface using atomistic molecular dynamic simulations. Enabled by metadynamics, we explored the relevant phase space and identified three protein states, each involving both the adsorbed and desorbed modes. We also studied the change of the secondary and tertiary structures of GB 1 during adsorption and the dominant interactions between the protein and surface in different adsorption stages. The results we obtained from simulation were found to be more adequate and complete than the previous one. We believe the model presented in this paper, in comparison with the previous ones, is a better theoretical model to understand and explain the experimental results.
基金the financial support from the Natural Sciences and Engineering Research Council(NSERC)under Alliance Program(grant no.ALLRP 557113-20)the Canada Research Chairs Program。
文摘Calcium carbonate(CaCO_(3))is a crucial mineral with great scientific relevance in biomineralization and geoscience.However,excessive precipitation of CaCO_(3)is posing a threat to industrial production and the aquatic environment.The utilization of chemical inhibitors is typically considered an economical and successful route for addressing the scaling issues,while the underlying mechanism is still debated and needs to be further investigated.In this context,a deep understanding of the crystallization process of CaCO_(3)and how the inhibitors interact with CaCO_(3)nuclei and crystals are of great significance in evaluating the performance of scale inhibitors.In recent years,with the rapid development of computing facilities,computer simulations have provided an atomic-level perspective on the kinetics and thermodynamics of possible association events in CaCO_(3)solutions as well as the predictions of nucleation pathway and growth mechanism of CaCO_(3)crystals as a complement to experiment.This review surveys several computational methods and their achievements in this field with a focus on analyzing the functional mechanisms of different types of inhibitors.A general discussion of the current challenges and future directions in applying atomistic simulations to the discovery,design,and development of more effective water-scale inhibitors is also discussed.
