A supervised artificial neural network (ANN) to model the nonlinear relationship between parameters of thermomechanical treatment processes with respect to hardness and conductivity properties was proposed for Cu-Cr-Z...A supervised artificial neural network (ANN) to model the nonlinear relationship between parameters of thermomechanical treatment processes with respect to hardness and conductivity properties was proposed for Cu-Cr-Zr alloy. The improved model was developed by the Levenberg-Marquardt training algorithm. A basic repository on the domain knowledge of thermomechanical treatment processes is established via sufficient data acquisition by the network. The results showed that the ANN system is an effective way and can be successfully used to predict and analyze the properties of Cu-Cr-Zr alloy.展开更多
Detailed experimental investigations were carried out for microwave pre-treatment of high ash Indian coal at high power level(900 W) in microwave oven. The microwave exposure times were fixed at60 s and 120 s. A rheol...Detailed experimental investigations were carried out for microwave pre-treatment of high ash Indian coal at high power level(900 W) in microwave oven. The microwave exposure times were fixed at60 s and 120 s. A rheology characteristic for microwave pre-treatment of coal-water slurry(CWS) was performed in an online Bohlin viscometer. The non-Newtonian character of the slurry follows the rheological model of Ostwald de Waele. The values of n and k vary from 0.31 to 0.64 and 0.19 to 0.81 Pa·sn,respectively. This paper presents an artificial neural network(ANN) model to predict the effects of operational parameters on apparent viscosity of CWS. A 4-2-1 topology with Levenberg-Marquardt training algorithm(trainlm) was selected as the controlled ANN. Mean squared error(MSE) of 0.002 and coefficient of multiple determinations(R^2) of 0.99 were obtained for the outperforming model. The promising values of correlation coefficient further confirm the robustness and satisfactory performance of the proposed ANN model.展开更多
In conventional chromite beneficiation plant, huge quantity of chromite is used to loss in the form of tailing. For recovery these valuable mineral, a gravity concentrator viz. wet shaking table was used.Optimisation ...In conventional chromite beneficiation plant, huge quantity of chromite is used to loss in the form of tailing. For recovery these valuable mineral, a gravity concentrator viz. wet shaking table was used.Optimisation along with performance prediction of the unit operation is necessary for efficient recovery.So, in this present study, an artificial neural network(ANN) modeling approach was attempted for predicting the performance of wet shaking table in terms of grade(%) and recovery(%). A three layer feed forward neural network(3:3–11–2:2) was developed by varying the major operating parameters such as wash water flow rate(L/min), deck tilt angle(degree) and slurry feed rate(L/h). The predicted value obtained by the neural network model shows excellent agreement with the experimental values.展开更多
Today flotation column has become an acceptable means of froth flotation for a fairly broad range of applications, in particular the cleaning of sulfides. Even after having been used for several years in mineral proce...Today flotation column has become an acceptable means of froth flotation for a fairly broad range of applications, in particular the cleaning of sulfides. Even after having been used for several years in mineral processing plants, the full potential of the flotation column process is still not fully exploited. There is no prediction of process performance for the complete use of available control capabilities. The on-line estimation of grade usually requires a significant amount of work in maintenance and calibration of on-stream analyzers, in order to maintain good accuracy and high availability. These difficulties and the high cost of investment and maintenance of these devices have encouraged the approach of prediction of metal grade and recovery. In this paper, a new approach has been proposed for metallurgical performance prediction in flotation columns using Artificial Neural Network (ANN). Despite of the wide range of applications and flexibility of NNs, there is still no general framework or procedure through which the appropriate network for a specific task can be designed. Design and structural optimization of NNs is still strongly dependent upon the designer's experience. To mitigate this problem, a new method for the auto-design of NNs was used, based on Genetic Algorithm (GA). The new proposed method was evaluated by a case study in pilot plant flotation column at Sarcheshmeh copper plant. The chemical reagents dosage, froth height, air, wash water flow rates, gas holdup, Cu grade in the rougher feed, flotation column feed, column tail and final concentrate streams were used to the simulation by GANN. In this work, multi-layer NNs with Back Propagation (BP) algorithm with 8-17-10-2 and 8- 13-6-2 arrangements have been applied to predict the Cu and Mo grades and recoveries, respectively. The correlation coefficient (R) values for the testing sets for Cu and Mo grades were 0.93, 0.94 and for their recoveries were 0.93, 0.92, respectively. The results discussed in this paper indicate that the proposed model can be used to predict the Cu and Mo grades and recoveries with a reasonable error.展开更多
CO_(2)flooding for enhanced oil recovery(EOR)not only enables underground carbon storage but also plays a critical role in tertiary oil recovery.However,its displacement efficiency is constrained by whether CO_(2)and ...CO_(2)flooding for enhanced oil recovery(EOR)not only enables underground carbon storage but also plays a critical role in tertiary oil recovery.However,its displacement efficiency is constrained by whether CO_(2)and crude oil achieve miscibility,necessitating precise prediction of the minimum miscibility pressure(MMP)for CO_(2)-oil systems.Traditional methods,such as experimental measurements and empirical correlations,face challenges including time-consuming procedures and limited applicability.In contrast,artificial intelligence(AI)algorithms have emerged as superior alternatives due to their efficiency,broad applicability,and high prediction accuracy.This study employs four AI algorithms—Random Forest Regression(RFR),Genetic Algorithm Based Back Propagation Artificial Neural Network(GA-BPNN),Support Vector Regression(SVR),and Gaussian Process Regression(GPR)—to establish predictive models for CO_(2)-oil MMP.A comprehensive database comprising 151 data entries was utilized for model development.The performance of these models was rigorously evaluated using five distinct statistical metrics and visualized comparisons.Validation results confirm their accuracy.Field applications demonstrate that all four models are effective for predicting MMP in ultra-deep reservoirs(burial depth>5000 m)with complex crude oil compositions.Among them,the RFR and GA-BPNN models outperform SVR and GPR,achieving root mean square errors(RMSE)of 0.33%and 2.23%,and average absolute percentage relative errors(AAPRE)of 0.01%and 0.04%,respectively.Sensitivity analysis of MMP-influencing factors reveals that reservoir temperature(T_(R))exerts the most significant impact on MMP,while Xint(mole fraction of intermediate oil components,including C_(2)-C_(4),CO_(2),and H_(2)S)exhibits the least influence.展开更多
According to the test data of subdivision errors in the measuring cycle of angular measuring system, the characteristics of subdivision errors generated by this system are analyzed. It is found that the subdivision er...According to the test data of subdivision errors in the measuring cycle of angular measuring system, the characteristics of subdivision errors generated by this system are analyzed. It is found that the subdivision errors are mainly due to the rotary-type inductosyn itself. For the characteristic of cyclical change, the subdivision errors in other measuring cycles can be compensated by the subdivision error model in one measuring cycle. Using the measured error data as training samples, combining GA and BP algorithm, an ANN model of subdivision error is designed. Simulation results indicate that GA reduces the uncertainty in the training process of the ANN model, and enhances the generalization of the model. Compared with the error model based on the least-mean-squared method, the designed ANN model of subdivision errors can achieve higher compensating precision.展开更多
Data mining has the potential to provide information for improving clinical acupuncture strategies by uncovering hidden rules between acupuncture manipulation and therapeutic effects in a data set. In this study, we p...Data mining has the potential to provide information for improving clinical acupuncture strategies by uncovering hidden rules between acupuncture manipulation and therapeutic effects in a data set. In this study, we performed acupuncture on 30 patients with hemiplegia due to acute ischemic stroke. All participants were pre-screened to ensure that they exhibited immediate responses to acupuncture. We used a twirling reinforcing acupuncture manipulation at the specific lines between the bilateral Baihui（GV20） and Taiyang（EX-HN5）. We collected neurologic deficit score, simplified Fugl-Meyer assessment score, muscle strength of the proximal and distal hemiplegic limbs, ratio of the maximal H-reflex to the maximal M-wave（Hmax/Mmax）, muscle tension at baseline and immediately after treatment, and the syndromes of traditional Chinese medicine at baseline. We then conducted data mining using an association algorithm and an artificial neural network backpropagation algorithm. We found that the twirling reinforcing manipulation had no obvious therapeutic difference in traditional Chinese medicine syndromes of ＂Deficiency and Excess＂. The change in the muscle strength of the upper distal and lower proximal limbs was one of the main factors affecting the immediate change in Fugl-Meyer scores. Additionally, we found a positive correlation between the muscle tension change of the upper limb and Hmax/Mmax immediate change, and both positive and negative correlations existed between the muscle tension change of the lower limb and immediate Hmax/Mmax change. Additionally, when the difference value of muscle tension for the upper and lower limbs was 〉 0 or 〈 0, the difference value of Hmax/Mmax was correspondingly positive or negative, indicating the scalp acupuncture has a bidirectional effect on muscle tension in hemiplegic limbs. Therefore, acupuncture with twirling reinforcing manipulation has distinct effects on acute ischemic stroke patients with different symptoms or stages of disease. Improved muscle tension in the upper and lower limbs, reflected by the variation in the Hmax/Mmax ratio, is crucial for recovery of motor function from hemiplegia.展开更多
OBJECTIVE:To study the morphological basis of the role of Siqi(cold as winter,cool as autumn,warm as spring,hot as summer),Wuwei(five flavors:sweet,pungent,salty,sour,and bitter),and Guijing(meridian tropism) through ...OBJECTIVE:To study the morphological basis of the role of Siqi(cold as winter,cool as autumn,warm as spring,hot as summer),Wuwei(five flavors:sweet,pungent,salty,sour,and bitter),and Guijing(meridian tropism) through the use of information integration.METHODS:A14C-2-deoxy-glucose autoradiography method was adopted to determine the overall impact of treatment with 39 herbs on functions of various tissues and organs.Data was measured at 4hs after a single dose and following the last treatment of repeated doses for a week.Least-squares estimation was used and fitted for each herb regression effect of organs and tissues after singleand repeated treatment.The slope of the regression line represented the cumulative trend of the effect of the herbs(β),and the standard deviation of the slope(Sβ) was compared with those of the untreated animals(t 'test).All significantly cumulative effect trends were applied with an artificial neural network,which integrated the relationship among Siqi,Wuwei,and Guijing with tissues and organs.RESULTS:There is a certain relationship among the Siqi,Wuwei,Guijing and the anatomy of organs and tissues,but the different scores indicate that influence of Siqi,Wuwei,Guijing to anatomy of organs and tissues was a nonlinear state.CONCLUSION:Results demonstrated that the effects of Siqi,Wuwei,and Guijing have a morphological basis,and each concept was associated with multiple anatomical structures.展开更多
Renewable energy sources like solar,wind,and hydro are becoming increasingly popular due to the fewer negative impacts they have on the environment.Because,Since the production of renewable energy sources is still in ...Renewable energy sources like solar,wind,and hydro are becoming increasingly popular due to the fewer negative impacts they have on the environment.Because,Since the production of renewable energy sources is still in the process of being created,photovoltaic(PV)systems are commonly utilized for installation situations that are acceptable,clean,and simple.This study presents an adaptive artificial intelligence approach that can be used for maximum power point tracking(MPPT)in solar systems with the help of an embedded controller.The adaptive method incorporates both the Whale Optimization Algorithm(WOA)and the Artificial Neural Network(ANN).The WOA was implemented to enhance the process of the ANN model’s training,and the ANN model was developed using the WOA.In addition to this,the inverter circuit is connected to the smart grid system,and the strengthening of the smart grid is achieved through the implementation of the CMCMAC protocol.This protocol prevents interference between customers and the organizations that provide their utilities.Using a protocol known as Cross-Layer Multi-Channel MAC(CMCMAC),the effect of interference is removed using the way that was suggested.Also,with the utilization of the ZIGBEE communication technology,bidirectional communication is made possible.The strategy that was suggested has been put into practice,and the results have shown that the PV system produces an output power of 73.32 KW and an efficiency of 98.72%.In addition to this,a built-in regulator is utilized to validate the proposed model.In this paper,the results of various experiments are analyzed,and a comparison is made between the suggested WOA with the ANN controller approach and others,such as the Particle Swarm Optimization(PSO)based MPPT and the Cuckoo Search(CS)based MPPT.By examining the comparison findings,it was determined that the adaptive AI-based embedded controller was superior to the other alternatives.展开更多
基金This work was supported by the stae“863 plan”,under Grant No.2002AA331112by the Major Science and Technology Project of Henan Province,China,under Grant No.0122021300.
文摘A supervised artificial neural network (ANN) to model the nonlinear relationship between parameters of thermomechanical treatment processes with respect to hardness and conductivity properties was proposed for Cu-Cr-Zr alloy. The improved model was developed by the Levenberg-Marquardt training algorithm. A basic repository on the domain knowledge of thermomechanical treatment processes is established via sufficient data acquisition by the network. The results showed that the ANN system is an effective way and can be successfully used to predict and analyze the properties of Cu-Cr-Zr alloy.
基金the sponsor CSIR (Council of Scientific and Industrial Research), New Delhi for their financial grant to carry out the present research work
文摘Detailed experimental investigations were carried out for microwave pre-treatment of high ash Indian coal at high power level(900 W) in microwave oven. The microwave exposure times were fixed at60 s and 120 s. A rheology characteristic for microwave pre-treatment of coal-water slurry(CWS) was performed in an online Bohlin viscometer. The non-Newtonian character of the slurry follows the rheological model of Ostwald de Waele. The values of n and k vary from 0.31 to 0.64 and 0.19 to 0.81 Pa·sn,respectively. This paper presents an artificial neural network(ANN) model to predict the effects of operational parameters on apparent viscosity of CWS. A 4-2-1 topology with Levenberg-Marquardt training algorithm(trainlm) was selected as the controlled ANN. Mean squared error(MSE) of 0.002 and coefficient of multiple determinations(R^2) of 0.99 were obtained for the outperforming model. The promising values of correlation coefficient further confirm the robustness and satisfactory performance of the proposed ANN model.
文摘In conventional chromite beneficiation plant, huge quantity of chromite is used to loss in the form of tailing. For recovery these valuable mineral, a gravity concentrator viz. wet shaking table was used.Optimisation along with performance prediction of the unit operation is necessary for efficient recovery.So, in this present study, an artificial neural network(ANN) modeling approach was attempted for predicting the performance of wet shaking table in terms of grade(%) and recovery(%). A three layer feed forward neural network(3:3–11–2:2) was developed by varying the major operating parameters such as wash water flow rate(L/min), deck tilt angle(degree) and slurry feed rate(L/h). The predicted value obtained by the neural network model shows excellent agreement with the experimental values.
基金the support of the Department of Research and Development of Sarcheshmeh copper plants for this research
文摘Today flotation column has become an acceptable means of froth flotation for a fairly broad range of applications, in particular the cleaning of sulfides. Even after having been used for several years in mineral processing plants, the full potential of the flotation column process is still not fully exploited. There is no prediction of process performance for the complete use of available control capabilities. The on-line estimation of grade usually requires a significant amount of work in maintenance and calibration of on-stream analyzers, in order to maintain good accuracy and high availability. These difficulties and the high cost of investment and maintenance of these devices have encouraged the approach of prediction of metal grade and recovery. In this paper, a new approach has been proposed for metallurgical performance prediction in flotation columns using Artificial Neural Network (ANN). Despite of the wide range of applications and flexibility of NNs, there is still no general framework or procedure through which the appropriate network for a specific task can be designed. Design and structural optimization of NNs is still strongly dependent upon the designer's experience. To mitigate this problem, a new method for the auto-design of NNs was used, based on Genetic Algorithm (GA). The new proposed method was evaluated by a case study in pilot plant flotation column at Sarcheshmeh copper plant. The chemical reagents dosage, froth height, air, wash water flow rates, gas holdup, Cu grade in the rougher feed, flotation column feed, column tail and final concentrate streams were used to the simulation by GANN. In this work, multi-layer NNs with Back Propagation (BP) algorithm with 8-17-10-2 and 8- 13-6-2 arrangements have been applied to predict the Cu and Mo grades and recoveries, respectively. The correlation coefficient (R) values for the testing sets for Cu and Mo grades were 0.93, 0.94 and for their recoveries were 0.93, 0.92, respectively. The results discussed in this paper indicate that the proposed model can be used to predict the Cu and Mo grades and recoveries with a reasonable error.
文摘CO_(2)flooding for enhanced oil recovery(EOR)not only enables underground carbon storage but also plays a critical role in tertiary oil recovery.However,its displacement efficiency is constrained by whether CO_(2)and crude oil achieve miscibility,necessitating precise prediction of the minimum miscibility pressure(MMP)for CO_(2)-oil systems.Traditional methods,such as experimental measurements and empirical correlations,face challenges including time-consuming procedures and limited applicability.In contrast,artificial intelligence(AI)algorithms have emerged as superior alternatives due to their efficiency,broad applicability,and high prediction accuracy.This study employs four AI algorithms—Random Forest Regression(RFR),Genetic Algorithm Based Back Propagation Artificial Neural Network(GA-BPNN),Support Vector Regression(SVR),and Gaussian Process Regression(GPR)—to establish predictive models for CO_(2)-oil MMP.A comprehensive database comprising 151 data entries was utilized for model development.The performance of these models was rigorously evaluated using five distinct statistical metrics and visualized comparisons.Validation results confirm their accuracy.Field applications demonstrate that all four models are effective for predicting MMP in ultra-deep reservoirs(burial depth>5000 m)with complex crude oil compositions.Among them,the RFR and GA-BPNN models outperform SVR and GPR,achieving root mean square errors(RMSE)of 0.33%and 2.23%,and average absolute percentage relative errors(AAPRE)of 0.01%and 0.04%,respectively.Sensitivity analysis of MMP-influencing factors reveals that reservoir temperature(T_(R))exerts the most significant impact on MMP,while Xint(mole fraction of intermediate oil components,including C_(2)-C_(4),CO_(2),and H_(2)S)exhibits the least influence.
文摘According to the test data of subdivision errors in the measuring cycle of angular measuring system, the characteristics of subdivision errors generated by this system are analyzed. It is found that the subdivision errors are mainly due to the rotary-type inductosyn itself. For the characteristic of cyclical change, the subdivision errors in other measuring cycles can be compensated by the subdivision error model in one measuring cycle. Using the measured error data as training samples, combining GA and BP algorithm, an ANN model of subdivision error is designed. Simulation results indicate that GA reduces the uncertainty in the training process of the ANN model, and enhances the generalization of the model. Compared with the error model based on the least-mean-squared method, the designed ANN model of subdivision errors can achieve higher compensating precision.
基金supported by a grant from the Supporting Program of the"Eleventh Five-year Plan"for Science&Technology Research of China,Ministry of Science and Technology of China,No.2006BAI12B02a grant from the Scientific Research Fund for Talent Introduction in the Gansu University of Chinese Medicine of China,No.2012-11
文摘Data mining has the potential to provide information for improving clinical acupuncture strategies by uncovering hidden rules between acupuncture manipulation and therapeutic effects in a data set. In this study, we performed acupuncture on 30 patients with hemiplegia due to acute ischemic stroke. All participants were pre-screened to ensure that they exhibited immediate responses to acupuncture. We used a twirling reinforcing acupuncture manipulation at the specific lines between the bilateral Baihui（GV20） and Taiyang（EX-HN5）. We collected neurologic deficit score, simplified Fugl-Meyer assessment score, muscle strength of the proximal and distal hemiplegic limbs, ratio of the maximal H-reflex to the maximal M-wave（Hmax/Mmax）, muscle tension at baseline and immediately after treatment, and the syndromes of traditional Chinese medicine at baseline. We then conducted data mining using an association algorithm and an artificial neural network backpropagation algorithm. We found that the twirling reinforcing manipulation had no obvious therapeutic difference in traditional Chinese medicine syndromes of ＂Deficiency and Excess＂. The change in the muscle strength of the upper distal and lower proximal limbs was one of the main factors affecting the immediate change in Fugl-Meyer scores. Additionally, we found a positive correlation between the muscle tension change of the upper limb and Hmax/Mmax immediate change, and both positive and negative correlations existed between the muscle tension change of the lower limb and immediate Hmax/Mmax change. Additionally, when the difference value of muscle tension for the upper and lower limbs was 〉 0 or 〈 0, the difference value of Hmax/Mmax was correspondingly positive or negative, indicating the scalp acupuncture has a bidirectional effect on muscle tension in hemiplegic limbs. Therefore, acupuncture with twirling reinforcing manipulation has distinct effects on acute ischemic stroke patients with different symptoms or stages of disease. Improved muscle tension in the upper and lower limbs, reflected by the variation in the Hmax/Mmax ratio, is crucial for recovery of motor function from hemiplegia.
基金Support by National Natural Science Foundation Grant(Correlation Analysis Among Herb's Properties affecting the Multiple Parameters of the Blood and the Morphology of the Organism Structure,No.81473366)
文摘OBJECTIVE:To study the morphological basis of the role of Siqi(cold as winter,cool as autumn,warm as spring,hot as summer),Wuwei(five flavors:sweet,pungent,salty,sour,and bitter),and Guijing(meridian tropism) through the use of information integration.METHODS:A14C-2-deoxy-glucose autoradiography method was adopted to determine the overall impact of treatment with 39 herbs on functions of various tissues and organs.Data was measured at 4hs after a single dose and following the last treatment of repeated doses for a week.Least-squares estimation was used and fitted for each herb regression effect of organs and tissues after singleand repeated treatment.The slope of the regression line represented the cumulative trend of the effect of the herbs(β),and the standard deviation of the slope(Sβ) was compared with those of the untreated animals(t 'test).All significantly cumulative effect trends were applied with an artificial neural network,which integrated the relationship among Siqi,Wuwei,and Guijing with tissues and organs.RESULTS:There is a certain relationship among the Siqi,Wuwei,Guijing and the anatomy of organs and tissues,but the different scores indicate that influence of Siqi,Wuwei,Guijing to anatomy of organs and tissues was a nonlinear state.CONCLUSION:Results demonstrated that the effects of Siqi,Wuwei,and Guijing have a morphological basis,and each concept was associated with multiple anatomical structures.
基金funding this research work through the Small Group Research Project under Grant Number RGP1/70/44.
文摘Renewable energy sources like solar,wind,and hydro are becoming increasingly popular due to the fewer negative impacts they have on the environment.Because,Since the production of renewable energy sources is still in the process of being created,photovoltaic(PV)systems are commonly utilized for installation situations that are acceptable,clean,and simple.This study presents an adaptive artificial intelligence approach that can be used for maximum power point tracking(MPPT)in solar systems with the help of an embedded controller.The adaptive method incorporates both the Whale Optimization Algorithm(WOA)and the Artificial Neural Network(ANN).The WOA was implemented to enhance the process of the ANN model’s training,and the ANN model was developed using the WOA.In addition to this,the inverter circuit is connected to the smart grid system,and the strengthening of the smart grid is achieved through the implementation of the CMCMAC protocol.This protocol prevents interference between customers and the organizations that provide their utilities.Using a protocol known as Cross-Layer Multi-Channel MAC(CMCMAC),the effect of interference is removed using the way that was suggested.Also,with the utilization of the ZIGBEE communication technology,bidirectional communication is made possible.The strategy that was suggested has been put into practice,and the results have shown that the PV system produces an output power of 73.32 KW and an efficiency of 98.72%.In addition to this,a built-in regulator is utilized to validate the proposed model.In this paper,the results of various experiments are analyzed,and a comparison is made between the suggested WOA with the ANN controller approach and others,such as the Particle Swarm Optimization(PSO)based MPPT and the Cuckoo Search(CS)based MPPT.By examining the comparison findings,it was determined that the adaptive AI-based embedded controller was superior to the other alternatives.
