An adaptive heat source mode is proposed to account for the keyhole effect and the characteristics of volumetric distribution along the direction of the workpiece thickness. Finite element analysis of the temperature ...An adaptive heat source mode is proposed to account for the keyhole effect and the characteristics of volumetric distribution along the direction of the workpiece thickness. Finite element analysis of the temperature field in keyhole plasma arc welding is conducted and the weld geometry is obtained. The predicted results are in agreement with the measured ones.展开更多
In order to eliminate influence of the carriers on the evaporation of rare earth elements in DC arc,a de- vice which introduces axially the sample aerosol has been designed to study the effects of controlled-atmos- ph...In order to eliminate influence of the carriers on the evaporation of rare earth elements in DC arc,a de- vice which introduces axially the sample aerosol has been designed to study the effects of controlled-atmos- phere,discharge current,electrode polarity and introduction direction of aerosol on the emission of rare earth elements in DC arc discharge.The influence of various matrices and carriers on the line density and excitation condition of rare earth elements have also been studied,then the related excitation mechnism is proposed.展开更多
A novel route to comprehensive utilization of valuable elements such as Ti, A1, Si and Mg in Ti-bearing electric arc furnace molten slag （Ti-bearing EAF slag） was proposed. The route can be expressed as a three-step...A novel route to comprehensive utilization of valuable elements such as Ti, A1, Si and Mg in Ti-bearing electric arc furnace molten slag （Ti-bearing EAF slag） was proposed. The route can be expressed as a three-step process including alkali fusion, water leaching and acidolysis. Following these processes under the optimum conditions, the recovery ratios of TiO2, Al2O3, SiO2 and MgO were about 97.5, 93.5, 27.9 and 53.5%, respectively. Meanwhile, nanostructured TiO2, NaA zeolite and Mg（OH）2 fire retardant were synthesized simultaneously by using Ti-bearing EAF slag as raw materials. In addition, the photocatalytic activity of prepared nanostructured TiO2 and the adsorption property of obtained NaA zeolite were investigated. The results showed that the photodegradation efficiency of as-prepared TiO2 was 80% for rhodamine B and the adsorption efficiency of NaA zeolite was 61% for Cu2＋ under the optimum conditions.展开更多
To improve the limiting current interruption capability and minimizing vacuum interrupter with axial magnetic field （AMF） electrodes, it is significant to investigate the vacuum arc behaviours between the contacts. ...To improve the limiting current interruption capability and minimizing vacuum interrupter with axial magnetic field （AMF） electrodes, it is significant to investigate the vacuum arc behaviours between the contacts. AMF distributions of the slot type electrodes were studied by both numerical analysis and experiments. Furthermore, the behaviours of vacuum arcs for different parameters of the slot type AMF electrodes were investigated by using high-speed CCD camera. The influences of gap distance, contact diameter and phase shift time between AMF and arc current on the vacuum arc were investigated. The results provide a reference for research and development of vacuum interrupters with slot type or other types of AMF electrode.展开更多
A modified mathematical model of heat source for rotating arc welding （RAW） process was developed for investigating the heat and temperature distribution. The characteristics of temperature field based on the comple...A modified mathematical model of heat source for rotating arc welding （RAW） process was developed for investigating the heat and temperature distribution. The characteristics of temperature field based on the complex welding motion trajectory were studied. In this work, a transient three-dimensional （ 3D ） model was established and computed by a finite element analysis computer program MARC as well as its subroutine. In RA＇W process, the temperature changes in the style of stepladder. Moreover in the high temperature zone, there are multiple peak temperature points. These characteristics of temperature distribution are induced by the arc rotating which leads the repetitive heating or fasing during the welding process. In contrast with non-rotating arc （NRAW） process, the width of temperature distribution enlarges, and the peak temperature of weld pool decreases. Good agreement is shown between the computed results and experimental results of thermal cycle in RAW process.展开更多
A group of εNd-La/Nb, Ba/Nb, Nb/Th diagrams are used to study mantleheterogeneity. Island-arc basalts (IAB) are distributed in a triangle of these diagrams.Three end-member components (the MORB-type depleted mantle, ...A group of εNd-La/Nb, Ba/Nb, Nb/Th diagrams are used to study mantleheterogeneity. Island-arc basalts (IAB) are distributed in a triangle of these diagrams.Three end-member components (the MORB-type depleted mantle, the fiuid released fromsubducted oceanic crust and the sediments from the continental crust) of the source ofIAB may be displayed in these diagrams. Two types of IAB are identified. They areof the two-component type (with little continental sediments), such as the basalts fromAleutians and New Britain, and the three-component type, such as those from Sunda,Lesser Antilles and Andes. In addition, the EMII type mantle-derived rocks may alsobe divided into two groups. One is exemplifled by continental flood basalts and someperidotite xenoliths, similar to IAB, with high La/Nb and Ba/Nb and low Nb/Th ratios.The other includes the Samoa-type oceanic island basalts, with low La/Nb and Ba/Nband high Nb/Th ratios. The corresponding two sub-components of EMII are EMIIM,which is related to the metasomatism of lithosphere mantle by fluids released from thesubducted oceanic crust, and EMIISR, related to the intervention of recycling continentalsediments into the convective mantle.展开更多
Based on the wave radiation and diffraction theory, this paper investigates a new type breakwater with upper arcshaped plate by using the boundary element method(BEM). By comparing with other three designs of plate ty...Based on the wave radiation and diffraction theory, this paper investigates a new type breakwater with upper arcshaped plate by using the boundary element method(BEM). By comparing with other three designs of plate type breakwater(lower arc-shaped plate, single horizontal plate and double horizontal plate), this new type breakwater has been proved more effective. The wave exiting force, transmission and reflection coefficients are analyzed and discussed. In order to reveal the wave elimination mechanism of this type of breakwater, the velocity field around the breakwater is obtained. It is shown that:(1) The sway exciting force is minimal.(2) When the ratio of the submergence and wave amplitude is 0.05, the wave elimination effect will increase by 50% compared with other three types of breakwater.(3) The obvious backflow is found above the plate in the velocity field analysis.展开更多
Based on the conventional arc-length method, an improved arc-length method with high-efficiency is proposed. The weighted modifications with respect to the variation of structural stiffness and extra-interpolation mod...Based on the conventional arc-length method, an improved arc-length method with high-efficiency is proposed. The weighted modifications with respect to the variation of structural stiffness and extra-interpolation modification by using the information of known equilibrium points are introduced to improve the incremental arc-length. An approximate expansion method for the accumulated and expected arc-length is used to ensure the convergence at given load levels in large range of applications. Numerical results show that the improved arc-length method has well adaptability and higher efficiency in the post-buckling analysis of plates and shells structures for tracing whole load-deflection path and obtaining the convergence values at any specified load levels.展开更多
文摘An adaptive heat source mode is proposed to account for the keyhole effect and the characteristics of volumetric distribution along the direction of the workpiece thickness. Finite element analysis of the temperature field in keyhole plasma arc welding is conducted and the weld geometry is obtained. The predicted results are in agreement with the measured ones.
文摘In order to eliminate influence of the carriers on the evaporation of rare earth elements in DC arc,a de- vice which introduces axially the sample aerosol has been designed to study the effects of controlled-atmos- phere,discharge current,electrode polarity and introduction direction of aerosol on the emission of rare earth elements in DC arc discharge.The influence of various matrices and carriers on the line density and excitation condition of rare earth elements have also been studied,then the related excitation mechnism is proposed.
基金This study was supported by the National Natural Science Foundation of China （Nos. 51471122 and 51604202）, the China Postdoctoral Science Foundation （No. 2016M592397） and the Science and Technology Project of Guangdong Province （No. 2013B090600025）.
文摘A novel route to comprehensive utilization of valuable elements such as Ti, A1, Si and Mg in Ti-bearing electric arc furnace molten slag （Ti-bearing EAF slag） was proposed. The route can be expressed as a three-step process including alkali fusion, water leaching and acidolysis. Following these processes under the optimum conditions, the recovery ratios of TiO2, Al2O3, SiO2 and MgO were about 97.5, 93.5, 27.9 and 53.5%, respectively. Meanwhile, nanostructured TiO2, NaA zeolite and Mg（OH）2 fire retardant were synthesized simultaneously by using Ti-bearing EAF slag as raw materials. In addition, the photocatalytic activity of prepared nanostructured TiO2 and the adsorption property of obtained NaA zeolite were investigated. The results showed that the photodegradation efficiency of as-prepared TiO2 was 80% for rhodamine B and the adsorption efficiency of NaA zeolite was 61% for Cu2＋ under the optimum conditions.
文摘To improve the limiting current interruption capability and minimizing vacuum interrupter with axial magnetic field （AMF） electrodes, it is significant to investigate the vacuum arc behaviours between the contacts. AMF distributions of the slot type electrodes were studied by both numerical analysis and experiments. Furthermore, the behaviours of vacuum arcs for different parameters of the slot type AMF electrodes were investigated by using high-speed CCD camera. The influences of gap distance, contact diameter and phase shift time between AMF and arc current on the vacuum arc were investigated. The results provide a reference for research and development of vacuum interrupters with slot type or other types of AMF electrode.
基金Supported by National Natural Science Foundation of China （Grant No. 51005141 ）.
文摘A modified mathematical model of heat source for rotating arc welding （RAW） process was developed for investigating the heat and temperature distribution. The characteristics of temperature field based on the complex welding motion trajectory were studied. In this work, a transient three-dimensional （ 3D ） model was established and computed by a finite element analysis computer program MARC as well as its subroutine. In RA＇W process, the temperature changes in the style of stepladder. Moreover in the high temperature zone, there are multiple peak temperature points. These characteristics of temperature distribution are induced by the arc rotating which leads the repetitive heating or fasing during the welding process. In contrast with non-rotating arc （NRAW） process, the width of temperature distribution enlarges, and the peak temperature of weld pool decreases. Good agreement is shown between the computed results and experimental results of thermal cycle in RAW process.
文摘A group of εNd-La/Nb, Ba/Nb, Nb/Th diagrams are used to study mantleheterogeneity. Island-arc basalts (IAB) are distributed in a triangle of these diagrams.Three end-member components (the MORB-type depleted mantle, the fiuid released fromsubducted oceanic crust and the sediments from the continental crust) of the source ofIAB may be displayed in these diagrams. Two types of IAB are identified. They areof the two-component type (with little continental sediments), such as the basalts fromAleutians and New Britain, and the three-component type, such as those from Sunda,Lesser Antilles and Andes. In addition, the EMII type mantle-derived rocks may alsobe divided into two groups. One is exemplifled by continental flood basalts and someperidotite xenoliths, similar to IAB, with high La/Nb and Ba/Nb and low Nb/Th ratios.The other includes the Samoa-type oceanic island basalts, with low La/Nb and Ba/Nband high Nb/Th ratios. The corresponding two sub-components of EMII are EMIIM,which is related to the metasomatism of lithosphere mantle by fluids released from thesubducted oceanic crust, and EMIISR, related to the intervention of recycling continentalsediments into the convective mantle.
基金financially supported by the National Key Basic Research Program of China(Grant No.2013CB036101)the National Natural Science Foundation of China(Grant No.11702054)
文摘Based on the wave radiation and diffraction theory, this paper investigates a new type breakwater with upper arcshaped plate by using the boundary element method(BEM). By comparing with other three designs of plate type breakwater(lower arc-shaped plate, single horizontal plate and double horizontal plate), this new type breakwater has been proved more effective. The wave exiting force, transmission and reflection coefficients are analyzed and discussed. In order to reveal the wave elimination mechanism of this type of breakwater, the velocity field around the breakwater is obtained. It is shown that:(1) The sway exciting force is minimal.(2) When the ratio of the submergence and wave amplitude is 0.05, the wave elimination effect will increase by 50% compared with other three types of breakwater.(3) The obvious backflow is found above the plate in the velocity field analysis.
基金Foundation item:the Aeronauties Science Foundation of China(00B01001)
文摘Based on the conventional arc-length method, an improved arc-length method with high-efficiency is proposed. The weighted modifications with respect to the variation of structural stiffness and extra-interpolation modification by using the information of known equilibrium points are introduced to improve the incremental arc-length. An approximate expansion method for the accumulated and expected arc-length is used to ensure the convergence at given load levels in large range of applications. Numerical results show that the improved arc-length method has well adaptability and higher efficiency in the post-buckling analysis of plates and shells structures for tracing whole load-deflection path and obtaining the convergence values at any specified load levels.
