An approximating algorithm on handling 3-D points cloud data was discussed for reconstruction of complicated curved surface. In this algorithm, the coordinate information of nodes both in internal and external regions...An approximating algorithm on handling 3-D points cloud data was discussed for reconstruction of complicated curved surface. In this algorithm, the coordinate information of nodes both in internal and external regions of partition interpolation was used to realize minimized least squares approximation error of surface fitting. The changes between internal and external interpolation regions are continuous and smooth. Meanwhile, surface shape has properties of local controllability, variation reduction, and convex hull. The practical example shows that this algorithm possesses a higher accuracy of curved surface reconstruction and also improves the distortion of curved surface reconstruction when typical approximating algorithms and unstable operation are used.展开更多
This paper proposes two kinds of approximate proximal point algorithms （APPA） for monotone variational inequalities, both of which can be viewed as two extended versions of Solodov and Svaiter＇s APPA in the paper ...This paper proposes two kinds of approximate proximal point algorithms （APPA） for monotone variational inequalities, both of which can be viewed as two extended versions of Solodov and Svaiter＇s APPA in the paper ＂Error bounds for proximal point subproblems and associated inexact proximal point algorithms＂ published in 2000. They are both prediction- correction methods which use the same inexactness restriction; the only difference is that they use different search directions in the correction steps. This paper also chooses an optimal step size in the two versions of the APPA to improve the profit at each iteration. Analysis also shows that the two APPAs are globally convergent under appropriate assumptions, and we can expect algorithm 2 to get more progress in every iteration than algorithm 1. Numerical experiments indicate that algorithm 2 is more efficient than algorithm 1 with the same correction step size,展开更多
The Quantum Approximate Optimization Algorithm(QAOA)is an algorithmic framework for finding approximate solutions to combinatorial optimization problems.It consists of interleaved unitary transformations induced by tw...The Quantum Approximate Optimization Algorithm(QAOA)is an algorithmic framework for finding approximate solutions to combinatorial optimization problems.It consists of interleaved unitary transformations induced by two operators labelled the mixing and problem Hamiltonians.To fit this framework,one needs to transform the original problem into a suitable form and embed it into these two Hamiltonians.In this paper,for the well-known NP-hard Traveling Salesman Problem(TSP),we encode its constraints into the mixing Hamiltonian rather than the conventional approach of adding penalty terms to the problem Hamiltonian.Moreover,we map edges(routes)connecting each pair of cities to qubits,which decreases the search space significantly in comparison to other approaches.As a result,our method can achieve a higher probability for the shortest round-trip route with only half the number of qubits consumed compared to IBM Q’s approach.We argue the formalization approach presented in this paper would lead to a generalized framework for finding,in the context of QAOA,high-quality approximate solutions to NP optimization problems.展开更多
develop a mentation This paper considers the priority facility primal-dual 3-approximation algorithm for procedure, the authors further improve the location problem with penalties： The authors this problem. Combining...develop a mentation This paper considers the priority facility primal-dual 3-approximation algorithm for procedure, the authors further improve the location problem with penalties： The authors this problem. Combining with the greedy aug- previous ratio 3 to 1.8526.展开更多
The multiple knapsack problem denoted by MKP (B,S,m,n) can be defined as fol- lows.A set B of n items and a set Sof m knapsacks are given such thateach item j has a profit pjand weightwj,and each knapsack i has a ca...The multiple knapsack problem denoted by MKP (B,S,m,n) can be defined as fol- lows.A set B of n items and a set Sof m knapsacks are given such thateach item j has a profit pjand weightwj,and each knapsack i has a capacity Ci.The goal is to find a subset of items of maximum profit such that they have a feasible packing in the knapsacks.MKP(B,S,m,n) is strongly NP- Complete and no polynomial- time approximation algorithm can have an approxima- tion ratio better than0 .5 .In the last ten years,semi- definite programming has been empolyed to solve some combinatorial problems successfully.This paper firstly presents a semi- definite re- laxation algorithm (MKPS) for MKP (B,S,m,n) .It is proved that MKPS have a approxima- tion ratio better than 0 .5 for a subclass of MKP (B,S,m,n) with n≤ 1 0 0 ,m≤ 5 and maxnj=1{ wj} minmi=1{ Ci} ≤ 2 3 .展开更多
A novel approach that integrates occlusion culling within the view-dependent rendering framework is proposed. The algorithm uses the prioritized-layered projection（PLP） algorithm to occlude those obscured objects, a...A novel approach that integrates occlusion culling within the view-dependent rendering framework is proposed. The algorithm uses the prioritized-layered projection（PLP） algorithm to occlude those obscured objects, and uses an approximate visibility technique to accurately and efficiently determine which objects will be visible in the coming future and prefetch those objects from disk before they are rendered, view-dependent rendering technique provides the ability to change level of detail over the surface seamlessly and smoothly in real-time according to cell solidity value.展开更多
In this paper, we propose a model for the epidemic control problem, the goal of which is to minimize the total cost of quarantining, vaccination and cure under the constraint on the maximum number of infected people a...In this paper, we propose a model for the epidemic control problem, the goal of which is to minimize the total cost of quarantining, vaccination and cure under the constraint on the maximum number of infected people allowed. A (1+ε+ε3 , 1+ ε+1/ε )- bicriteria approximation algorithm is given.展开更多
This paper describes an extremely fast polynomial time algorithm, the NOVCA （Near Optimal Vertex Cover Algorithm） that produces an optimal or near optimal vertex cover for any known undirected graph G （V, E）. NOVC...This paper describes an extremely fast polynomial time algorithm, the NOVCA （Near Optimal Vertex Cover Algorithm） that produces an optimal or near optimal vertex cover for any known undirected graph G （V, E）. NOVCA is based on the idea of（l） including the vertex having maximum degree in the vertex cover and （2） rendering the degree of a vertex to zero by including all its adjacent vertices. The three versions of algorithm, NOVCA-I, NOVCA-II, and NOVCA-random, have been developed. The results identifying bounds on the size of the minimum vertex cover as well as polynomial complexity of algorithm are given with experimental verification. Future research efforts will be directed at tuning the algorithm and providing proof for better approximation ratio with NOVCA compared to any available vertex cover algorithms.展开更多
In order to find roots of maximal monotone operators, this paper introduces and studies the modified approximate proximal point algorithm with an error sequence {e k} such that || ek || \leqslant hk || xk - [(x)\tilde...In order to find roots of maximal monotone operators, this paper introduces and studies the modified approximate proximal point algorithm with an error sequence {e k} such that || ek || \leqslant hk || xk - [(x)\tilde]k ||\left\| { e^k } \right\| \leqslant \eta _k \left\| { x^k - \tilde x^k } \right\| with ?k = 0￥ ( hk - 1 ) < + ￥\sum\limits_{k = 0}^\infty {\left( {\eta _k - 1} \right)} and infk \geqslant 0 hk = m\geqslant 1\mathop {\inf }\limits_{k \geqslant 0} \eta _k = \mu \geqslant 1 . Here, the restrictions on {η k} are very different from the ones on {η k}, given by He et al (Science in China Ser. A, 2002, 32 (11): 1026–1032.) that supk \geqslant 0 hk = v < 1\mathop {\sup }\limits_{k \geqslant 0} \eta _k = v . Moreover, the characteristic conditions of the convergence of the modified approximate proximal point algorithm are presented by virtue of the new technique very different from the ones given by He et al.展开更多
In this paper,attention is paid to study an algorithm for the common due datetotal weighted tardiness problem of single machine scheduling. Anapproximation alsorithm is given. It performs well in the sense of worst-ca...In this paper,attention is paid to study an algorithm for the common due datetotal weighted tardiness problem of single machine scheduling. Anapproximation alsorithm is given. It performs well in the sense of worst-casebehaviour and its worst-case performance ratio is 2.展开更多
The increasing demand for infotainment applications necessitates efficient bandwidth and energy resource allocation.Sixth-Generation(6G)networks,utilizing Cognitive Radio(CR)technology within CR Network(CRN),can enhan...The increasing demand for infotainment applications necessitates efficient bandwidth and energy resource allocation.Sixth-Generation(6G)networks,utilizing Cognitive Radio(CR)technology within CR Network(CRN),can enhance spectrum utilization by accessing unused spectrum when licensed Primary Mobile Equipment(PME)is inactive or served by a Primary Base Station(PrBS).Secondary Mobile Equipment(SME)accesses this spectrum through a Secondary Base Station(SrBS)using opportunistic access,i.e.,spectrum sensing.Hybrid Multiple Access(HMA),combining Orthogonal Multiple Access(OMA)and Non-Orthogonal Multiple Access(NOMA),can enhance Energy Efficiency(EE).Additionally,SME Clustering(SMEC)reduces inter-cluster interference,enhancing EE further.Despite these advancements,the integration of CR technology,HMA,and SMEC in CRN for better bandwidth utilization and EE remains unexplored.This paper introduces a new CRassisted SMEC-based Downlink HMA(CR-SMEC-DHMA)method for 6G CRN,aimed at jointly optimizing SME admission,SME association,sum rate,and EE subject to imperfect sensing,collision,and Quality of Service(QoS).A novel optimization problem,formulated as a non-linear fractional programming problem,is solved using the Charnes-Cooper Transformation(CCT)to convert into a concave optimization problem,and an ε-optimal Outer Approximation Algorithm(OAA)is employed to solve the concave optimization problem.Simulations demonstrate the effectiveness of the proposed CR-SMEC-DHMA,surpassing the performance of current OMAenabled CRN,NOMA-enabled CRN,SMEC-OMA enabled CRN,and SMEC-NOMA enabled CRN methods,with ε-optimal results obtained at ε=10^(−3),while satisfying Performance Measures(PMs)including SME admission in SMEC,SME association with SrBS,SME-channel opportunistic allocation through spectrum sensing,sum rate and overall EE within the 6G CRN.展开更多
When deploying Reconfigurable Intelligent Surface(RIS)to improve System Sum-Rate(SSR),the timeliness and accuracy of SSR optimization methods are difficult to achieve simultaneously through a single algorithm.Some alg...When deploying Reconfigurable Intelligent Surface(RIS)to improve System Sum-Rate(SSR),the timeliness and accuracy of SSR optimization methods are difficult to achieve simultaneously through a single algorithm.Some algorithms focus on timeliness,while some focus on accuracy.In this paper,in order to take into account the timeliness and accuracy of the system comprehensively,we construct SSR analysis model of RIS-assisted multiuser downlink communication system and propose several new optimization methods.The goal is to maximize SSR by using the proposed algorithms to jointly optimize power allocation and reflection coefficients.To solve this comprehensive problem,two sets of Alternating Optimization(AO)-based timeliness algorithms and one set of Monotonic Optimization(MO)-based accuracy algorithms are proposed separately to jointly optimize system performance.First,the Water-Filling(WF)-based and penalty-based low complexity algorithms are developed to optimize power allocation and reflection coefficients respectively.To improve the reality of the calculation,penalty-based algorithm cleverly considers residual noise that is difficult to calculate.Then,for further improve the timeliness,a new Successive Convex Approximation(SCA)-based low complexity algorithm is designed to further optimize reflection coefficients and its convergence is proved.Third,in order to verify the effectiveness of the proposed timeliness algorithms,we further propose MO-based accuracy algorithms,in which,the Polyblock Outer Approximation(POA)algorithm,the Semidefinite Relaxation(SDR)method,and the bisection search algorithm are combined in a novel way.Numerical results confirm the timeliness of AO-based algorithms and the accuracy of MO-based algorithms.They supervise and complement each other.展开更多
As power systems expand,solving the unit commitment problem(UCP)becomes increasingly challenging due to the curse of dimensionality,and traditional methods often struggle to balance computational efficiency and soluti...As power systems expand,solving the unit commitment problem(UCP)becomes increasingly challenging due to the curse of dimensionality,and traditional methods often struggle to balance computational efficiency and solution optimality.To tackle this issue,we propose a problem-structure-informed quantum approximate optimization algorithm(QAOA)framework that fully exploits the quantum advantage under extremely limited quantum resources.Specifically,we leverage the inherent topological structure of power systems to decompose large-scale UCP instances into smaller subproblems,which are solvable in parallel by limited number of qubits.This decomposition not only circumvents the current hardware limitations of quantum computing but also achieves higher performance as the graph structure of the power system becomes more sparse.Consequently,our approach can be extended to future power systems that are larger and more complex.展开更多
Steiner connected dominating set(SCDS)is a generalization of the famous connected dominating set problem,where only a specified set of required vertices has to be dominated by a connected dominating set,and known to b...Steiner connected dominating set(SCDS)is a generalization of the famous connected dominating set problem,where only a specified set of required vertices has to be dominated by a connected dominating set,and known to be NP-hard.This paper firstly modifies the SCDS algorithm of Guha and Khuller and achieves a worst case approximation ratio of(2+1/(m-1))H(min(△,k))+O(1),which outperforms the previous best result(c+1)H(min(△,k))+O(1)in the case of m≥1+1/(c-1),where c is the best approximation ratio for Steiner tree,A is the maximum degree of the graph,k is the cardinality of the set of required vertices,m is an optional integer satisfying 0≤m≤min(△,k)and H is the harmonic function.This paper also proposes another approximation algorithm which is based on a greedy approach.The second algorithm can establish a worst case approximation ratio of 2 ln(min(△,k))+O(1),which can also be improved to 2 lnk if the optimal solution is greater than c·e^2c+1/2(c+1).展开更多
The connected dominating set(CDS)problem,which consists of finding a smallest connected dominating set for graphs is an NP-hard problem in the unit disk graphs(UDGs).This paper focuses on the CDS problem in wireless n...The connected dominating set(CDS)problem,which consists of finding a smallest connected dominating set for graphs is an NP-hard problem in the unit disk graphs(UDGs).This paper focuses on the CDS problem in wireless networks.Investigation of some properties of independent set(IS)in UDGs shows that geometric features of nodes distribution like angle and area can be used to design efficient heuristics for the approximation algorithms.Several constant factor approximation algorithms are presented for the CDS problem in UDGs.Simulation results show that the proposed algorithms perform better than some known ones.展开更多
Li transient concentration distribution in spherical active material particles can affect the maximum power density and the safe operating regime of the electric vehicles(EVs). On one hand, the quasiexact/exact soluti...Li transient concentration distribution in spherical active material particles can affect the maximum power density and the safe operating regime of the electric vehicles(EVs). On one hand, the quasiexact/exact solution obtained in the time/frequency domain is time-consuming and just as a reference value for approximate solutions;on the other hand, calculation errors and application range of approximate solutions not only rely on approximate algorithms but also on discharge modes. For the purpose to track the transient dynamics for Li solid-phase diffusion in spherical active particles with a tolerable error range and for a wide applicable range, it is necessary to choose optimal approximate algorithms in terms of discharge modes and the nature of active material particles. In this study, approximation methods,such as diffusion length method, polynomial profile approximation method, Padé approximation method,pseudo steady state method, eigenfunction-based Galerkin collocation method, and separation of variables method for solving Li solid-phase diffusion in spherical active particles are compared from calculation fundamentals to algorithm implementation. Furthermore, these approximate solutions are quantitatively compared to the quasi-exact/exact solution in the time/frequency domain under typical discharge modes, i.e., start-up, slow-down, and speed-up. The results obtained from the viewpoint of time-frequency analysis offer a theoretical foundation on how to track Li transient concentration profile in spherical active particles with a high precision and for a wide application range. In turn, optimal solutions of Li solid diffusion equations for spherical active particles can improve the reliability in predicting safe operating regime and estimating maximum power for automotive batteries.展开更多
In this paper,a two-stage semi-hybrid flowshop problem which appears in graphics processing is studied. For this problem, there are two machines M1 and M2, and a set of independent jobs J= {J1 ,J2 ,…,Jn }. Each Ji co...In this paper,a two-stage semi-hybrid flowshop problem which appears in graphics processing is studied. For this problem, there are two machines M1 and M2, and a set of independent jobs J= {J1 ,J2 ,…,Jn }. Each Ji consists of two tasks Ai and Bi ,and task Ai must be completed before task Bi can start. Furthermore ,task Ai can be processed on M1 for ai time units ,or on Mw for ai^J time units ,while task Bi can only be processed on M2 for bi time units. Jobs and machines are available at time zero and no preemption is allowed. The objective is to minimize the maximum job completion time. It is showed that this problem is NP-hard. And a pseudo-polynomial time optimal algorithm is presented. A polynomial time approximation algorithm with worst-case ratio 2 is also presented.展开更多
This paper presents an economic lot-sizing problem with perishable inventory and general economies of scale cost functions. For the case with backlogging allowed, a mathematical model is formulated, and several proper...This paper presents an economic lot-sizing problem with perishable inventory and general economies of scale cost functions. For the case with backlogging allowed, a mathematical model is formulated, and several properties of the optimal solutions are explored. With the help of these optimality properties, a polynomial time approximation algorithm is developed by a new method. The new method adopts a shift technique to obtain a feasible solution of subproblem and takes the optimal solution of the subproblem as an approximation solution of our problem. The worst case performance for the approximation algorithm is proven to be （4√2 ＋ 5）/7. Finally, an instance illustrates that the bound is tight.展开更多
The electrical system of CNC machine tool is very complex which involves many uncertain factors and dynamic stochastic characteristics when failure occurs.Therefore,the traditional system reliability analysis method,f...The electrical system of CNC machine tool is very complex which involves many uncertain factors and dynamic stochastic characteristics when failure occurs.Therefore,the traditional system reliability analysis method,fault tree analysis(FTA)method,based on static logic and static failure mechanism is no longer applicable for dynamic systems reliability analysis.Dynamic fault tree(DFT)analysis method can solve this problem effectively.In this method,DFT first should be pretreated to get a simplified fault tree(FT);then the FT was modularized to get the independent static subtrees and dynamic subtrees.Binary decision diagram(BDD)analysis method was used to analyze static subtrees,while an approximation algorithm was used to deal with dynamic subtrees.When the scale of each subtree is smaller than the system scale,the analysis efficiency can be improved significantly.At last,the usefulness of this DFT analysis method was proved by applying it to analyzing the reliability of electrical system.展开更多
基金Supported by the Guangxi Provincial Natural Science Fund of China (No. 0832096)the Scientific Research Project of Education Department of Guangxi Province of China (No. 200708LX151)the Science Fund of Wuzhou University (No. 2008B008)
文摘An approximating algorithm on handling 3-D points cloud data was discussed for reconstruction of complicated curved surface. In this algorithm, the coordinate information of nodes both in internal and external regions of partition interpolation was used to realize minimized least squares approximation error of surface fitting. The changes between internal and external interpolation regions are continuous and smooth. Meanwhile, surface shape has properties of local controllability, variation reduction, and convex hull. The practical example shows that this algorithm possesses a higher accuracy of curved surface reconstruction and also improves the distortion of curved surface reconstruction when typical approximating algorithms and unstable operation are used.
文摘This paper proposes two kinds of approximate proximal point algorithms （APPA） for monotone variational inequalities, both of which can be viewed as two extended versions of Solodov and Svaiter＇s APPA in the paper ＂Error bounds for proximal point subproblems and associated inexact proximal point algorithms＂ published in 2000. They are both prediction- correction methods which use the same inexactness restriction; the only difference is that they use different search directions in the correction steps. This paper also chooses an optimal step size in the two versions of the APPA to improve the profit at each iteration. Analysis also shows that the two APPAs are globally convergent under appropriate assumptions, and we can expect algorithm 2 to get more progress in every iteration than algorithm 1. Numerical experiments indicate that algorithm 2 is more efficient than algorithm 1 with the same correction step size,
基金This work is supported by the Natural Science Foundation,China(Grant No.61802002)Natural Science Foundation of Anhui Province,China(Grant No.1708085MF162).
文摘The Quantum Approximate Optimization Algorithm(QAOA)is an algorithmic framework for finding approximate solutions to combinatorial optimization problems.It consists of interleaved unitary transformations induced by two operators labelled the mixing and problem Hamiltonians.To fit this framework,one needs to transform the original problem into a suitable form and embed it into these two Hamiltonians.In this paper,for the well-known NP-hard Traveling Salesman Problem(TSP),we encode its constraints into the mixing Hamiltonian rather than the conventional approach of adding penalty terms to the problem Hamiltonian.Moreover,we map edges(routes)connecting each pair of cities to qubits,which decreases the search space significantly in comparison to other approaches.As a result,our method can achieve a higher probability for the shortest round-trip route with only half the number of qubits consumed compared to IBM Q’s approach.We argue the formalization approach presented in this paper would lead to a generalized framework for finding,in the context of QAOA,high-quality approximate solutions to NP optimization problems.
基金supported by the National Natural Science Foundation of China under Grant No.11371001
文摘develop a mentation This paper considers the priority facility primal-dual 3-approximation algorithm for procedure, the authors further improve the location problem with penalties： The authors this problem. Combining with the greedy aug- previous ratio 3 to 1.8526.
基金Supported by the National Natural Science Foundation of China(1 9971 0 78)
文摘The multiple knapsack problem denoted by MKP (B,S,m,n) can be defined as fol- lows.A set B of n items and a set Sof m knapsacks are given such thateach item j has a profit pjand weightwj,and each knapsack i has a capacity Ci.The goal is to find a subset of items of maximum profit such that they have a feasible packing in the knapsacks.MKP(B,S,m,n) is strongly NP- Complete and no polynomial- time approximation algorithm can have an approxima- tion ratio better than0 .5 .In the last ten years,semi- definite programming has been empolyed to solve some combinatorial problems successfully.This paper firstly presents a semi- definite re- laxation algorithm (MKPS) for MKP (B,S,m,n) .It is proved that MKPS have a approxima- tion ratio better than 0 .5 for a subclass of MKP (B,S,m,n) with n≤ 1 0 0 ,m≤ 5 and maxnj=1{ wj} minmi=1{ Ci} ≤ 2 3 .
文摘A novel approach that integrates occlusion culling within the view-dependent rendering framework is proposed. The algorithm uses the prioritized-layered projection（PLP） algorithm to occlude those obscured objects, and uses an approximate visibility technique to accurately and efficiently determine which objects will be visible in the coming future and prefetch those objects from disk before they are rendered, view-dependent rendering technique provides the ability to change level of detail over the surface seamlessly and smoothly in real-time according to cell solidity value.
文摘In this paper, we propose a model for the epidemic control problem, the goal of which is to minimize the total cost of quarantining, vaccination and cure under the constraint on the maximum number of infected people allowed. A (1+ε+ε3 , 1+ ε+1/ε )- bicriteria approximation algorithm is given.
文摘This paper describes an extremely fast polynomial time algorithm, the NOVCA （Near Optimal Vertex Cover Algorithm） that produces an optimal or near optimal vertex cover for any known undirected graph G （V, E）. NOVCA is based on the idea of（l） including the vertex having maximum degree in the vertex cover and （2） rendering the degree of a vertex to zero by including all its adjacent vertices. The three versions of algorithm, NOVCA-I, NOVCA-II, and NOVCA-random, have been developed. The results identifying bounds on the size of the minimum vertex cover as well as polynomial complexity of algorithm are given with experimental verification. Future research efforts will be directed at tuning the algorithm and providing proof for better approximation ratio with NOVCA compared to any available vertex cover algorithms.
基金Supported both by the Teaching and Research Award Fund for Outstanding Young Teachers inHigher Educational Institutions of MOEChinaand by the Dawn Program Fund in Shanghai
文摘In order to find roots of maximal monotone operators, this paper introduces and studies the modified approximate proximal point algorithm with an error sequence {e k} such that || ek || \leqslant hk || xk - [(x)\tilde]k ||\left\| { e^k } \right\| \leqslant \eta _k \left\| { x^k - \tilde x^k } \right\| with ?k = 0￥ ( hk - 1 ) < + ￥\sum\limits_{k = 0}^\infty {\left( {\eta _k - 1} \right)} and infk \geqslant 0 hk = m\geqslant 1\mathop {\inf }\limits_{k \geqslant 0} \eta _k = \mu \geqslant 1 . Here, the restrictions on {η k} are very different from the ones on {η k}, given by He et al (Science in China Ser. A, 2002, 32 (11): 1026–1032.) that supk \geqslant 0 hk = v < 1\mathop {\sup }\limits_{k \geqslant 0} \eta _k = v . Moreover, the characteristic conditions of the convergence of the modified approximate proximal point algorithm are presented by virtue of the new technique very different from the ones given by He et al.
文摘In this paper,attention is paid to study an algorithm for the common due datetotal weighted tardiness problem of single machine scheduling. Anapproximation alsorithm is given. It performs well in the sense of worst-casebehaviour and its worst-case performance ratio is 2.
文摘The increasing demand for infotainment applications necessitates efficient bandwidth and energy resource allocation.Sixth-Generation(6G)networks,utilizing Cognitive Radio(CR)technology within CR Network(CRN),can enhance spectrum utilization by accessing unused spectrum when licensed Primary Mobile Equipment(PME)is inactive or served by a Primary Base Station(PrBS).Secondary Mobile Equipment(SME)accesses this spectrum through a Secondary Base Station(SrBS)using opportunistic access,i.e.,spectrum sensing.Hybrid Multiple Access(HMA),combining Orthogonal Multiple Access(OMA)and Non-Orthogonal Multiple Access(NOMA),can enhance Energy Efficiency(EE).Additionally,SME Clustering(SMEC)reduces inter-cluster interference,enhancing EE further.Despite these advancements,the integration of CR technology,HMA,and SMEC in CRN for better bandwidth utilization and EE remains unexplored.This paper introduces a new CRassisted SMEC-based Downlink HMA(CR-SMEC-DHMA)method for 6G CRN,aimed at jointly optimizing SME admission,SME association,sum rate,and EE subject to imperfect sensing,collision,and Quality of Service(QoS).A novel optimization problem,formulated as a non-linear fractional programming problem,is solved using the Charnes-Cooper Transformation(CCT)to convert into a concave optimization problem,and an ε-optimal Outer Approximation Algorithm(OAA)is employed to solve the concave optimization problem.Simulations demonstrate the effectiveness of the proposed CR-SMEC-DHMA,surpassing the performance of current OMAenabled CRN,NOMA-enabled CRN,SMEC-OMA enabled CRN,and SMEC-NOMA enabled CRN methods,with ε-optimal results obtained at ε=10^(−3),while satisfying Performance Measures(PMs)including SME admission in SMEC,SME association with SrBS,SME-channel opportunistic allocation through spectrum sensing,sum rate and overall EE within the 6G CRN.
基金supported in part by Natural Science Foundation of China(92367102)in part by National Science and Technology Major Project(2024ZD1300400).
文摘When deploying Reconfigurable Intelligent Surface(RIS)to improve System Sum-Rate(SSR),the timeliness and accuracy of SSR optimization methods are difficult to achieve simultaneously through a single algorithm.Some algorithms focus on timeliness,while some focus on accuracy.In this paper,in order to take into account the timeliness and accuracy of the system comprehensively,we construct SSR analysis model of RIS-assisted multiuser downlink communication system and propose several new optimization methods.The goal is to maximize SSR by using the proposed algorithms to jointly optimize power allocation and reflection coefficients.To solve this comprehensive problem,two sets of Alternating Optimization(AO)-based timeliness algorithms and one set of Monotonic Optimization(MO)-based accuracy algorithms are proposed separately to jointly optimize system performance.First,the Water-Filling(WF)-based and penalty-based low complexity algorithms are developed to optimize power allocation and reflection coefficients respectively.To improve the reality of the calculation,penalty-based algorithm cleverly considers residual noise that is difficult to calculate.Then,for further improve the timeliness,a new Successive Convex Approximation(SCA)-based low complexity algorithm is designed to further optimize reflection coefficients and its convergence is proved.Third,in order to verify the effectiveness of the proposed timeliness algorithms,we further propose MO-based accuracy algorithms,in which,the Polyblock Outer Approximation(POA)algorithm,the Semidefinite Relaxation(SDR)method,and the bisection search algorithm are combined in a novel way.Numerical results confirm the timeliness of AO-based algorithms and the accuracy of MO-based algorithms.They supervise and complement each other.
文摘As power systems expand,solving the unit commitment problem(UCP)becomes increasingly challenging due to the curse of dimensionality,and traditional methods often struggle to balance computational efficiency and solution optimality.To tackle this issue,we propose a problem-structure-informed quantum approximate optimization algorithm(QAOA)framework that fully exploits the quantum advantage under extremely limited quantum resources.Specifically,we leverage the inherent topological structure of power systems to decompose large-scale UCP instances into smaller subproblems,which are solvable in parallel by limited number of qubits.This decomposition not only circumvents the current hardware limitations of quantum computing but also achieves higher performance as the graph structure of the power system becomes more sparse.Consequently,our approach can be extended to future power systems that are larger and more complex.
基金Supported by the National Natural Science Foundation of China under Grant No.60173048 on“Research on Routing and W avelength Assignment in W DM All-optical Networks”.
文摘Steiner connected dominating set(SCDS)is a generalization of the famous connected dominating set problem,where only a specified set of required vertices has to be dominated by a connected dominating set,and known to be NP-hard.This paper firstly modifies the SCDS algorithm of Guha and Khuller and achieves a worst case approximation ratio of(2+1/(m-1))H(min(△,k))+O(1),which outperforms the previous best result(c+1)H(min(△,k))+O(1)in the case of m≥1+1/(c-1),where c is the best approximation ratio for Steiner tree,A is the maximum degree of the graph,k is the cardinality of the set of required vertices,m is an optional integer satisfying 0≤m≤min(△,k)and H is the harmonic function.This paper also proposes another approximation algorithm which is based on a greedy approach.The second algorithm can establish a worst case approximation ratio of 2 ln(min(△,k))+O(1),which can also be improved to 2 lnk if the optimal solution is greater than c·e^2c+1/2(c+1).
基金supported by the National Natural Science Foundation of China under Grant No 60473090the National"11th Five-Year-Supporting-Plan"of China under Grant No 2006BAH02A0407
文摘The connected dominating set(CDS)problem,which consists of finding a smallest connected dominating set for graphs is an NP-hard problem in the unit disk graphs(UDGs).This paper focuses on the CDS problem in wireless networks.Investigation of some properties of independent set(IS)in UDGs shows that geometric features of nodes distribution like angle and area can be used to design efficient heuristics for the approximation algorithms.Several constant factor approximation algorithms are presented for the CDS problem in UDGs.Simulation results show that the proposed algorithms perform better than some known ones.
基金the financial support from the National Science Foundation of China(22078190 and 12002196)the National Key Research and Development Program of China(2020YFB1505802)。
文摘Li transient concentration distribution in spherical active material particles can affect the maximum power density and the safe operating regime of the electric vehicles(EVs). On one hand, the quasiexact/exact solution obtained in the time/frequency domain is time-consuming and just as a reference value for approximate solutions;on the other hand, calculation errors and application range of approximate solutions not only rely on approximate algorithms but also on discharge modes. For the purpose to track the transient dynamics for Li solid-phase diffusion in spherical active particles with a tolerable error range and for a wide applicable range, it is necessary to choose optimal approximate algorithms in terms of discharge modes and the nature of active material particles. In this study, approximation methods,such as diffusion length method, polynomial profile approximation method, Padé approximation method,pseudo steady state method, eigenfunction-based Galerkin collocation method, and separation of variables method for solving Li solid-phase diffusion in spherical active particles are compared from calculation fundamentals to algorithm implementation. Furthermore, these approximate solutions are quantitatively compared to the quasi-exact/exact solution in the time/frequency domain under typical discharge modes, i.e., start-up, slow-down, and speed-up. The results obtained from the viewpoint of time-frequency analysis offer a theoretical foundation on how to track Li transient concentration profile in spherical active particles with a high precision and for a wide application range. In turn, optimal solutions of Li solid diffusion equations for spherical active particles can improve the reliability in predicting safe operating regime and estimating maximum power for automotive batteries.
文摘In this paper,a two-stage semi-hybrid flowshop problem which appears in graphics processing is studied. For this problem, there are two machines M1 and M2, and a set of independent jobs J= {J1 ,J2 ,…,Jn }. Each Ji consists of two tasks Ai and Bi ,and task Ai must be completed before task Bi can start. Furthermore ,task Ai can be processed on M1 for ai time units ,or on Mw for ai^J time units ,while task Bi can only be processed on M2 for bi time units. Jobs and machines are available at time zero and no preemption is allowed. The objective is to minimize the maximum job completion time. It is showed that this problem is NP-hard. And a pseudo-polynomial time optimal algorithm is presented. A polynomial time approximation algorithm with worst-case ratio 2 is also presented.
基金supported by National Natural Science Foundation of China (No. 10671108 and 70971076)Found for the Doctoral Program of Higher Education of Ministry of Education of China (No. 20070446001)+1 种基金Innovation Planning Project of Shandong Province (No. SDYY06034)Foundation of Qufu Normal University (No. XJZ200849)
文摘This paper presents an economic lot-sizing problem with perishable inventory and general economies of scale cost functions. For the case with backlogging allowed, a mathematical model is formulated, and several properties of the optimal solutions are explored. With the help of these optimality properties, a polynomial time approximation algorithm is developed by a new method. The new method adopts a shift technique to obtain a feasible solution of subproblem and takes the optimal solution of the subproblem as an approximation solution of our problem. The worst case performance for the approximation algorithm is proven to be （4√2 ＋ 5）/7. Finally, an instance illustrates that the bound is tight.
文摘The electrical system of CNC machine tool is very complex which involves many uncertain factors and dynamic stochastic characteristics when failure occurs.Therefore,the traditional system reliability analysis method,fault tree analysis(FTA)method,based on static logic and static failure mechanism is no longer applicable for dynamic systems reliability analysis.Dynamic fault tree(DFT)analysis method can solve this problem effectively.In this method,DFT first should be pretreated to get a simplified fault tree(FT);then the FT was modularized to get the independent static subtrees and dynamic subtrees.Binary decision diagram(BDD)analysis method was used to analyze static subtrees,while an approximation algorithm was used to deal with dynamic subtrees.When the scale of each subtree is smaller than the system scale,the analysis efficiency can be improved significantly.At last,the usefulness of this DFT analysis method was proved by applying it to analyzing the reliability of electrical system.
