The hydroxyl-terminated polybutadiene （HTPB） possessing high content of 1,4-units was synthesized by anionic polymerization of butadiene, using alkyllithium containing silicon-protected hydroxyl group as initiator a...The hydroxyl-terminated polybutadiene （HTPB） possessing high content of 1,4-units was synthesized by anionic polymerization of butadiene, using alkyllithium containing silicon-protected hydroxyl group as initiator and cyclohexane as solvent. The polymers were characterized by GPC, IR and 1H-NMR. The mechanical properties of cured films were also evaluated. The results show that the content of 1,4-units for HTPBs made by anionic polymerization reaches up to 90%. The molecular weight distribution is very narrow （〈 1.05）. The functionality of hydroxyl groups approaches 2. Compared with free radical HTPB, the elongation at break of anionic HTPB films increased by 70%, while the tensile strength remained nearly unchanged. This new HTPB can be very useful in solid propellant.展开更多
A series of 3-arm ABC and AA＇B and 4-arm ABCD, AA＇BC and AA＇A＂B heteroarm star polymers comprising one poly（4-methylphenyl vinyl sulfoxide） segment and other segments such as polystyrene, poly（a-methylstyrene）...A series of 3-arm ABC and AA＇B and 4-arm ABCD, AA＇BC and AA＇A＂B heteroarm star polymers comprising one poly（4-methylphenyl vinyl sulfoxide） segment and other segments such as polystyrene, poly（a-methylstyrene）, poly（4-methoxystyrene） and poly（4-trimethylsilylstyrene） were synthesized by living anionic polymerization based on diphenylethylene （DPE） chemistry. The DPE-functionalized polymers were synthesized by iterative methodology, and the objective star polymers were prepared by two distinct methodologies based on anionic polymerization using DPE-functionalized polymers. The first methodology involves an addition reaction of living anionic polymer with excess DPE-functionalized polymer and a subsequent living anionic polymerization of 4-methylphenyl vinyl sulfoxide （MePVSO） initiated from the in situ formed polymer anion with two or three polymer segments. The second methodology comprises an addition reaction of DPE-functionalized polymer with excess sec-BuLi and a following anionic polymerization of MePVSO initiated from the in situ formed polymer anion and 3-methyl-1,1-diphenylpentyl anion as well. Both approaches could afford the target heteroarm star polymers with predetermined molecular weight, narrow molecular weight distribution （Mw/Mn 〈 1.03） and desired composition, evidenced by SEC, 1H-NMR and SLS analyses. These polymers can be used as model polymers to investigate structure-property relationships in heteroarm star polymers.展开更多
The objective of this study is to develop chitosaneanionic polymers based extendedrelease tablets and test the feasibility of using this system for the sustained release of highly water-soluble drugs with high drug lo...The objective of this study is to develop chitosaneanionic polymers based extendedrelease tablets and test the feasibility of using this system for the sustained release of highly water-soluble drugs with high drug loading.Here,the combination of sodium valproate(VPS)and valproic acid(VPA)were chosen as the model drugs.Anionic polymers studied include xanthan gum(XG),carrageenan(CG),sodium carboxymethyl cellulose(CMC-Na)and sodium alginate(SA).The tablets were prepared by wet granulation method.In vitro drug release was carried out under simulated gastrointestinal condition.Drug release mechanism was studied.Compared with single polymers,chitosaneanionic polymers based system caused a further slowdown of drug release rate.Among them,CS exanthan gum matrix system exhibited the best extended-release behavior and could extend drug release for up to 24 h.Differential scanning calorimetry(DSC)and Fourier transform infrared spectroscopy(FTIR)studies demonstrated that polyelectrolyte complexes(PECs)were formed on the tablet surface,which played an important role on retarding erosion and swelling of the matrix in the later stage.In conclusion,this study demonstrated that it is possible to develop highly water-soluble drugs loaded extendedrelease tablets using chitosaneanionic polymers based system.展开更多
Three-arm and four-arm star-like polybutadienes （PBds） were synthesized via the combination of living anionic polymerization and the click coupling method. Kinetic study showed that the click reaction between the az...Three-arm and four-arm star-like polybutadienes （PBds） were synthesized via the combination of living anionic polymerization and the click coupling method. Kinetic study showed that the click reaction between the azido group terminated PBd-t-N3 and the alkyne-containing multifunctional linking reagent was fast and highly efficient. All coupling reactions were fully accomplished within 40 min at 50 ℃ in toluene in the presence of the reducing agent Cu（0）, proven by 1H-NMR, FTIR and GPC measurements. For the coupling reactions between the PBd-t-N3 polymer and dialkyne-containing compound, the final conversion of the coupled PBd-PBd polymer was ca. 97.0%. When a PBd-t-N3 polymer was reacted with trialkyne-containing or tetraalkyne-containing compound, the conversion of three-arm or four-arm PBd was around 95.5% or 87.0%, respectively. Several factors influencing the coupling efficiency were studied, including the molecular weight of the initial PBd-t-N3, arm numbers and the molar ratio of the azido group to the alkynyl group. The results indicated that the conversion of the target products would be promoted when the molecular weight of the PBd-t-N3 was low and the molar ratio of the azido to alkynyl groups was close to 1.展开更多
Copolymers of 1,3-butadiene and p-methylstyrene （p-MS） were synthesized via anionic polymerization. A benzophenone-potassium complex was added to tune the reactivity ratio of the two monomers, leading to random and ...Copolymers of 1,3-butadiene and p-methylstyrene （p-MS） were synthesized via anionic polymerization. A benzophenone-potassium complex was added to tune the reactivity ratio of the two monomers, leading to random and gradient composition alonglthe copolymer chain. The overall composition and microstructure could be controlled and well characterized by GPC and H-NMR. The p-MS was distributed from gradient to random with increasing the content of the benzophenone-potassium complex, and the 1,2-microstrucmre in the polybutadiene sequence increased at the same time. The hydrogenation of the copolymer of 1,3-butadiene and p-MS resulted in the corresponding saturated copolymer with well- defined structure and narrow molecular weight distribution.展开更多
Thermal,mechanical,and viscoelastic properties of polybutadiene-based rubber materials are highly dependent on polybutadiene microstructure.The use of polar modifier in association with alkyllithium is a well-known me...Thermal,mechanical,and viscoelastic properties of polybutadiene-based rubber materials are highly dependent on polybutadiene microstructure.The use of polar modifier in association with alkyllithium is a well-known method to obtain polybutadiene with a high vinyl con tent.Another approach is to use bimetallic initiating species such as alkyllithium combined to heavier alkali metal alkoxide(RONa,ROK...).The polymerization control is n evertheless not achieved and several parameters were found to influe nee it.Using bimetallic in itiating systems based on alkyllithium and a potassium alkoxide,alkyllithium structure,initiator preformation time,and initiator composition were identified as parameters influencing the anionic polymerization process of butadiene and/or polybutadiene microstructure.In addition,the use of trimetallic systems based on alkyllithium,potassium alkoxide,and alkylaluminum was investigated in order to prevent side reactions regardless of the[K]/[Li]ratio and of the initiator preformation time.展开更多
For living anionic polymerization(LAP),solvent has a great influence on both reaction mechanism and kinetics.In this work,by using the classical butyl lithium-styrene polymerization as a model system,the effect of sol...For living anionic polymerization(LAP),solvent has a great influence on both reaction mechanism and kinetics.In this work,by using the classical butyl lithium-styrene polymerization as a model system,the effect of solvent on the mechanism and kinetics of LAP was revealed through a strategy combining density functional theory(DFT)calculations and kinetic modeling.In terms of mechanism,it is found that the stronger the solvent polarity,the more electrons transfer from initiator to solvent through detailed energy decomposition analysis of electrostatic interactions between initiator and solvent molecules.Furthermore,we also found that the stronger the solvent polarity,the higher the monomer initiation energy barrier and the smaller the initiation rate coefficient.Counterintuitively,initiation is more favorable at lower temperatures based on the calculated results ofΔG_(TS).Finally,the kinetic characteristics in different solvents were further examined by kinetic modeling.It is found that in benzene and n-pentane,the polymerization rate exhibits first-order kinetics.While,slow initiation and fast propagation were observed in tetrahydrofuran(THF)due to the slow free ion formation rate,leading to a deviation from first-order kinetics.展开更多
The kinetic study of the anionic polymerization of isoprene is carried out in tetrahy-drofuran(THF), using n-BuLi as initiator. Kinetic parameters are obtained, which comprise chain propagation rate constant, kp, and ...The kinetic study of the anionic polymerization of isoprene is carried out in tetrahy-drofuran(THF), using n-BuLi as initiator. Kinetic parameters are obtained, which comprise chain propagation rate constant, kp, and partial rate constants, k3 and k4 + k5, propagation orders with respect to monomer and active species concentrations, α and β, real activation energy, E, as well as partial activation energies, E3 and E4+5 and so on. The relationship between the microstruc-ture of polyisoprene and the ratio of [THF]/[n-BuLi] has been investigated. On the basis of the studies mentioned above, a reasonable mechanism of the anionic polymerization of isoprene in THF is proposed.展开更多
A star-shaped multifunctional styrene-isoprene copolymer was synthesized with n-BuLi as initiator, divinyl benzene as coupling agent, cyclobexane as solvent by living anionic polymerization. Using this polymer as graf...A star-shaped multifunctional styrene-isoprene copolymer was synthesized with n-BuLi as initiator, divinyl benzene as coupling agent, cyclobexane as solvent by living anionic polymerization. Using this polymer as grafting agent, a novel star-shaped branched polymer, containing several polyisobutylene, was prepared via cationic ~aolymerization. The star PS-b-PI and star-branched polyisobutylene were characterized by GPC, ＇HNMR and FT-IR, and the effects of different adding order and the amount of grafting agent were investigated.展开更多
A simple new method for the syntheses of a highly soluble noncross linked C 60 styrene copolymers by means of lithium camphor initiated anionic polymerization reaction is demonstrated.
Anionic polymerization of methyl methacrylate (MMA), n-butyl methacrylate (nBMA) and glycidyl methacrylate (GMA) initiated by nBuCu(NCy2)Li (1) in tetrahydrofuran (THF) at -50 degrees C to -10 degrees C was investigat...Anionic polymerization of methyl methacrylate (MMA), n-butyl methacrylate (nBMA) and glycidyl methacrylate (GMA) initiated by nBuCu(NCy2)Li (1) in tetrahydrofuran (THF) at -50 degrees C to -10 degrees C was investigated. It was found that the polymerization of MMA and nBMA initiated by 1 proceeded quantitatively in THF to afford PMMA and PBMA with polydispersity index 1.15-1.30 and nearly 100% initiator efficiencies at -10 degrees C. The molecular weights increased linearly with the ratio of [monomer]/[1]. However, a post-polymerization experiment carried out on this system revealed a double polymer peak by GPC when fresh monomer was added after an interval of 10 min. Polymerization of styrene could be initiated by 1, but the initiator efficiency was low.展开更多
Alpha-trichloroacetoxy terminated polystyrene oligomer (PS-CH2CH2OCOCCl3) and poly-(styrene-b-butadiene) oligomer [P(S-b-B)-CH2CH2OCOCCl3)] were synthesized by living anionic polymeri-zation using n-butyllithium as in...Alpha-trichloroacetoxy terminated polystyrene oligomer (PS-CH2CH2OCOCCl3) and poly-(styrene-b-butadiene) oligomer [P(S-b-B)-CH2CH2OCOCCl3)] were synthesized by living anionic polymeri-zation using n-butyllithium as initiator. Then the PS-CH2CH2OCOCCl3 (PS-Cl-3) or P(S-b-B)-CH2CH2O-COCCl3 (PSB-Cl-3) was used as the macroinitiator in the polymerization of(meth)acrylates in the presence of CuX/bpy. AB diblock and ABC triblock copolymers were prepared by the integrated living anionic polymerization (LAP)-atom transfer radical polymerization (ATRP). The structures of the PSB-Cl-3 and the P(S-b-MMA) were identified by FTIR and H-1-NMR spectrum, respectively. A new way to design block copolymers (the combination of LAP and ATRP) was developed.展开更多
A new cyclic monomer, 2-methyl-2-methocycarbonyl-5-methylene 1,3-dioxlan-4-one,wassynthesized successfully. The monomer and intermediate were characterized by ~1H NMR,^(13)C NMR, INEPT (Intensive Nuclei Enhanced by Po...A new cyclic monomer, 2-methyl-2-methocycarbonyl-5-methylene 1,3-dioxlan-4-one,wassynthesized successfully. The monomer and intermediate were characterized by ~1H NMR,^(13)C NMR, INEPT (Intensive Nuclei Enhanced by Polarization Transfer) technique, IR andelemental analysis. Anionic polymerization of the monomer was carried out in anhydrous THF at.70℃, and 9-fluorenyllithium was used as initiator. The polymer strucure was determined byIR, NMR and elemental analysis. Molecular weight of the polymer was estimated by viscositymeasurement in DMSO at 30℃.展开更多
A new cyclic monomer, 2-methyl-2-methoxycarbonyl-5-methylene-1,3-dioxolan-4-one,was synthesized successfully. The monomer and intermediate were characterized by ~1H NMR, ^(13)CNMR, INEPT(Intensive Nuclei Enhanced by P...A new cyclic monomer, 2-methyl-2-methoxycarbonyl-5-methylene-1,3-dioxolan-4-one,was synthesized successfully. The monomer and intermediate were characterized by ~1H NMR, ^(13)CNMR, INEPT(Intensive Nuclei Enhanced by Polarization Transfer) technique, IR and elementalanalysis. Anionic polymerization of the monomer was carried out in anhydrous THF at -70℃,and 9-fluorenyllithium was used as initiator. The polymer structure was determined by IR, NMRand elemental analysis. Molecular weight of the polymer was estimated by viscosity measurementin DMSO at 30℃.展开更多
Some chiral binaphthyl crown ethers were synthesized. The anionic polymerization of methyl methacrylate (MMA) was carried out in the presence of t-BuOK, Ph2CHK or Ph2CHNa (RM), and RM coordination initiator by using c...Some chiral binaphthyl crown ethers were synthesized. The anionic polymerization of methyl methacrylate (MMA) was carried out in the presence of t-BuOK, Ph2CHK or Ph2CHNa (RM), and RM coordination initiator by using chiral binaphthyl crown ethers as ligands, respectively. The results showed that in the former case the PMMA obtained has mainly isotactic structure but without optical activity, while in the later case the PMMA produced predominately has syndiotactic structure also without optical activity.展开更多
20 wt% polyamide 12 （PA1212） pellets were dissolved in molten caprolactam. The caprolactam was then catalyzed at 180℃ and polymerized by means of anionic ring-opening polymerization to produce in situ blends of the...20 wt% polyamide 12 （PA1212） pellets were dissolved in molten caprolactam. The caprolactam was then catalyzed at 180℃ and polymerized by means of anionic ring-opening polymerization to produce in situ blends of the resultant polyamide 6 （PA6） and PA 1212. Mechanical blends with same ingredient were prepared through melt blending on a twin-screw extruder. Scanning electron microscopy （SEM） observation revealed that contrary to the mechanical blends with small spherulites embedded in the matrix, no phase-separation existed in the in situ blends. The results of thermal analysis by differential scanning calorimetry （DSC） showed that single melting peak and crystallization peak existed for the in situ blends, while two melting and crystallization peaks appeared for the mechanical blends. The in situ blend film and the mixed blend film, both cast from a dilute formic acid solution with a concentration of 0.5 g/L, remained similar crystallization and melting behavior as above. It is proved by solution 13C-NMR analysis that transamidation took place during the in situ blending, and it is suggested that the combination of temperature increasing and the basic surrounding derived from NaOH during polymerization resulted in the occurrence of transamidation. Furthermore, it is proposed that the interchange reaction between PA 1212 and PA6 also resulted from the degradative reaction during the anionic polymerization.展开更多
A noncrystallizable semiaromatic polyamide copolymer（NSAP） was dissolved in molten caprolactam, and PA6/ NSAP blends were produced in-situ via the anionic ring-opening polymerization of caprolactam. The presence of ...A noncrystallizable semiaromatic polyamide copolymer（NSAP） was dissolved in molten caprolactam, and PA6/ NSAP blends were produced in-situ via the anionic ring-opening polymerization of caprolactam. The presence of a single loss tangent（tanS） peak measured by means of dynamic mechanical analysis（DMA） proves the miscibility between PA6 and NSAP in the blends. It was found that there existed drastic changes in the crystallographic form and crystallization kinetics for the in-situ blends, e.g. , when 20% NSAP was added, nearly all crystallites existed in the ,y form and the crystallization could hardly occur upon cooling even at a rate of 2.5 ℃/min. Moreover, cold crystallization appears during the subsequent heating, and its melting point is 40 ℃ lower than that of the virgin system. On the other hand, the size of the spherulites only decreases modestly. It is suggested that the introduction of irregular stiff segments originated from NSAP into PA6 macromolecule chain, which resulted from transamidation during the polymerization play a dominant role in the drastic change of crystallization kinetics and the resultant morphology of the in-situ blends.展开更多
This work confirms the new view of the initiation and propagation mechanism of the anionic polymerization previously proposed, based on the investigation of anionic bulk-polymerization of styrene and α-methyl styrene...This work confirms the new view of the initiation and propagation mechanism of the anionic polymerization previously proposed, based on the investigation of anionic bulk-polymerization of styrene and α-methyl styrene with the help of a self designed microflow device and characterized by GPC and in situ ^7Li NMR. It was found that n-BuLl tended to form the hexameric-aggregated structure and even to form the huge aggregated structure based on the former. These aggregations of initiators could directly initiate the anionic polymerization and form the su-pramolecule aggregations. The supramolecule aggregations inevitably blocked the diffusion of the monomers to the ion-pairs and resulted in a stationary-conversion platform. Then the aggregators were dissociated completely into equal binary-aggregated species, and the polymerization continued again rapidly before the termination. Tetrahy-drofuran （THF） acted as the electron donator, which could push the electron cloud to Li cation and make the aggre- gated ring of the active species rather loosened and facilitated the monomer to insert in. Therefore, a little THF can greatly promote the anionic polymerization. However, further addition of THF might block the channel between the ion-pairs and decrease the propagation rate. It was also found that the aggregated structure of the active species during the anionic polymerization only depends on the initiator aggregations which were formed before the polym-erization.展开更多
(−)-Menthyl(S)-6'-acrylyl-2'-methyloxy-1,1'-binaphthalene-2-carboxylate(3)was synthesized and anionically polymerized using n-BuLi as an initiator in toluene.The monomer 3 was levorotatory and had an[α]_(...(−)-Menthyl(S)-6'-acrylyl-2'-methyloxy-1,1'-binaphthalene-2-carboxylate(3)was synthesized and anionically polymerized using n-BuLi as an initiator in toluene.The monomer 3 was levorotatory and had an[α]_(D)^(25)value of−72.4,but its corresponding polymer poly-3 was dextrorotatory and showed an[α]_(D)^(25)value of+162.0.Poly-3 was confirmed to exist in the form of one-handed helical structure in solution by means of comparing the specific optical rotation and the CD spectra with that of 3 and the model compounds such as(−)-menthyl(S)-6'-propionyl-2'-methyloxy-1,1'-binaphthalene-2-carboxylate 2b and(−)-menthyl(S)-6'-heptanoyl-2'-methyloxy-1,1'-binaphthalene-2-carboxylate 2c.This conclusion was also confirmed by the fact that the g-value of poly-3 is about 11 times of that of monomer 3.展开更多
The anionic polymerization of N-vinylcarbazole（NVC） by using optically active anionic initiators such as the lithium salts of（S）-1-（9H-fluoren-2-yl）-4-isopropyl-4,5-dihydrooxazole（（S）-1-FIDH） and（S）-2-（9H...The anionic polymerization of N-vinylcarbazole（NVC） by using optically active anionic initiators such as the lithium salts of（S）-1-（9H-fluoren-2-yl）-4-isopropyl-4,5-dihydrooxazole（（S）-1-FIDH） and（S）-2-（9H-fluoren-2-yl）-4-isopropyl-4,5-dihydrooxazole（（S）-2-FIDH） and complexes of（-）-Sparteine with n-butylithium（n-Bu Li-（-）-Sp） or fluorenyl lithium（FILi-（-）-Sp） was achieved. The yield and specific rotation of poly（N-vinylcarbazole）s（poly（NVC）s） were considerably affected by the molar ratio of（S）-FIDH to NVC. The highest yield and specific rotation were obtained with Li-（S）-1-FIDH as an initiator, with a molar ratio of monomer and initiator [M]/[I] = 10/1. The effects of the chiral initiators, type of solvent and the polymerization temperature were investigated. The obtained optical activity of polymers was attributed to asymmetric induction of the chiral initiators.展开更多
文摘The hydroxyl-terminated polybutadiene （HTPB） possessing high content of 1,4-units was synthesized by anionic polymerization of butadiene, using alkyllithium containing silicon-protected hydroxyl group as initiator and cyclohexane as solvent. The polymers were characterized by GPC, IR and 1H-NMR. The mechanical properties of cured films were also evaluated. The results show that the content of 1,4-units for HTPBs made by anionic polymerization reaches up to 90%. The molecular weight distribution is very narrow （〈 1.05）. The functionality of hydroxyl groups approaches 2. Compared with free radical HTPB, the elongation at break of anionic HTPB films increased by 70%, while the tensile strength remained nearly unchanged. This new HTPB can be very useful in solid propellant.
基金supported by the National Natural Science Foundation of China(Nos.20844001 and 20874067)the Key Project of Chinese Ministry of Education(No.209049)Natural Science Fund for Colleges and Universities of Jiangsu Province(No.08KJB150015).
文摘A series of 3-arm ABC and AA＇B and 4-arm ABCD, AA＇BC and AA＇A＂B heteroarm star polymers comprising one poly（4-methylphenyl vinyl sulfoxide） segment and other segments such as polystyrene, poly（a-methylstyrene）, poly（4-methoxystyrene） and poly（4-trimethylsilylstyrene） were synthesized by living anionic polymerization based on diphenylethylene （DPE） chemistry. The DPE-functionalized polymers were synthesized by iterative methodology, and the objective star polymers were prepared by two distinct methodologies based on anionic polymerization using DPE-functionalized polymers. The first methodology involves an addition reaction of living anionic polymer with excess DPE-functionalized polymer and a subsequent living anionic polymerization of 4-methylphenyl vinyl sulfoxide （MePVSO） initiated from the in situ formed polymer anion with two or three polymer segments. The second methodology comprises an addition reaction of DPE-functionalized polymer with excess sec-BuLi and a following anionic polymerization of MePVSO initiated from the in situ formed polymer anion and 3-methyl-1,1-diphenylpentyl anion as well. Both approaches could afford the target heteroarm star polymers with predetermined molecular weight, narrow molecular weight distribution （Mw/Mn 〈 1.03） and desired composition, evidenced by SEC, 1H-NMR and SLS analyses. These polymers can be used as model polymers to investigate structure-property relationships in heteroarm star polymers.
文摘The objective of this study is to develop chitosaneanionic polymers based extendedrelease tablets and test the feasibility of using this system for the sustained release of highly water-soluble drugs with high drug loading.Here,the combination of sodium valproate(VPS)and valproic acid(VPA)were chosen as the model drugs.Anionic polymers studied include xanthan gum(XG),carrageenan(CG),sodium carboxymethyl cellulose(CMC-Na)and sodium alginate(SA).The tablets were prepared by wet granulation method.In vitro drug release was carried out under simulated gastrointestinal condition.Drug release mechanism was studied.Compared with single polymers,chitosaneanionic polymers based system caused a further slowdown of drug release rate.Among them,CS exanthan gum matrix system exhibited the best extended-release behavior and could extend drug release for up to 24 h.Differential scanning calorimetry(DSC)and Fourier transform infrared spectroscopy(FTIR)studies demonstrated that polyelectrolyte complexes(PECs)were formed on the tablet surface,which played an important role on retarding erosion and swelling of the matrix in the later stage.In conclusion,this study demonstrated that it is possible to develop highly water-soluble drugs loaded extendedrelease tablets using chitosaneanionic polymers based system.
基金financially supported by the National Natural Science Foundation of China(Nos.51233005,21004060 and 51073149)
文摘Three-arm and four-arm star-like polybutadienes （PBds） were synthesized via the combination of living anionic polymerization and the click coupling method. Kinetic study showed that the click reaction between the azido group terminated PBd-t-N3 and the alkyne-containing multifunctional linking reagent was fast and highly efficient. All coupling reactions were fully accomplished within 40 min at 50 ℃ in toluene in the presence of the reducing agent Cu（0）, proven by 1H-NMR, FTIR and GPC measurements. For the coupling reactions between the PBd-t-N3 polymer and dialkyne-containing compound, the final conversion of the coupled PBd-PBd polymer was ca. 97.0%. When a PBd-t-N3 polymer was reacted with trialkyne-containing or tetraalkyne-containing compound, the conversion of three-arm or four-arm PBd was around 95.5% or 87.0%, respectively. Several factors influencing the coupling efficiency were studied, including the molecular weight of the initial PBd-t-N3, arm numbers and the molar ratio of the azido group to the alkynyl group. The results indicated that the conversion of the target products would be promoted when the molecular weight of the PBd-t-N3 was low and the molar ratio of the azido to alkynyl groups was close to 1.
基金the National Natural Science Foundation of China(Nos.51073149 and 51233005)
文摘Copolymers of 1,3-butadiene and p-methylstyrene （p-MS） were synthesized via anionic polymerization. A benzophenone-potassium complex was added to tune the reactivity ratio of the two monomers, leading to random and gradient composition alonglthe copolymer chain. The overall composition and microstructure could be controlled and well characterized by GPC and H-NMR. The p-MS was distributed from gradient to random with increasing the content of the benzophenone-potassium complex, and the 1,2-microstrucmre in the polybutadiene sequence increased at the same time. The hydrogenation of the copolymer of 1,3-butadiene and p-MS resulted in the corresponding saturated copolymer with well- defined structure and narrow molecular weight distribution.
文摘Thermal,mechanical,and viscoelastic properties of polybutadiene-based rubber materials are highly dependent on polybutadiene microstructure.The use of polar modifier in association with alkyllithium is a well-known method to obtain polybutadiene with a high vinyl con tent.Another approach is to use bimetallic initiating species such as alkyllithium combined to heavier alkali metal alkoxide(RONa,ROK...).The polymerization control is n evertheless not achieved and several parameters were found to influe nee it.Using bimetallic in itiating systems based on alkyllithium and a potassium alkoxide,alkyllithium structure,initiator preformation time,and initiator composition were identified as parameters influencing the anionic polymerization process of butadiene and/or polybutadiene microstructure.In addition,the use of trimetallic systems based on alkyllithium,potassium alkoxide,and alkylaluminum was investigated in order to prevent side reactions regardless of the[K]/[Li]ratio and of the initiator preformation time.
基金financially supported by the National Natural Science Foundation of China(U21A20313,22222807)。
文摘For living anionic polymerization(LAP),solvent has a great influence on both reaction mechanism and kinetics.In this work,by using the classical butyl lithium-styrene polymerization as a model system,the effect of solvent on the mechanism and kinetics of LAP was revealed through a strategy combining density functional theory(DFT)calculations and kinetic modeling.In terms of mechanism,it is found that the stronger the solvent polarity,the more electrons transfer from initiator to solvent through detailed energy decomposition analysis of electrostatic interactions between initiator and solvent molecules.Furthermore,we also found that the stronger the solvent polarity,the higher the monomer initiation energy barrier and the smaller the initiation rate coefficient.Counterintuitively,initiation is more favorable at lower temperatures based on the calculated results ofΔG_(TS).Finally,the kinetic characteristics in different solvents were further examined by kinetic modeling.It is found that in benzene and n-pentane,the polymerization rate exhibits first-order kinetics.While,slow initiation and fast propagation were observed in tetrahydrofuran(THF)due to the slow free ion formation rate,leading to a deviation from first-order kinetics.
文摘The kinetic study of the anionic polymerization of isoprene is carried out in tetrahy-drofuran(THF), using n-BuLi as initiator. Kinetic parameters are obtained, which comprise chain propagation rate constant, kp, and partial rate constants, k3 and k4 + k5, propagation orders with respect to monomer and active species concentrations, α and β, real activation energy, E, as well as partial activation energies, E3 and E4+5 and so on. The relationship between the microstruc-ture of polyisoprene and the ratio of [THF]/[n-BuLi] has been investigated. On the basis of the studies mentioned above, a reasonable mechanism of the anionic polymerization of isoprene in THF is proposed.
文摘A star-shaped multifunctional styrene-isoprene copolymer was synthesized with n-BuLi as initiator, divinyl benzene as coupling agent, cyclobexane as solvent by living anionic polymerization. Using this polymer as grafting agent, a novel star-shaped branched polymer, containing several polyisobutylene, was prepared via cationic ~aolymerization. The star PS-b-PI and star-branched polyisobutylene were characterized by GPC, ＇HNMR and FT-IR, and the effects of different adding order and the amount of grafting agent were investigated.
文摘A simple new method for the syntheses of a highly soluble noncross linked C 60 styrene copolymers by means of lithium camphor initiated anionic polymerization reaction is demonstrated.
基金supported by the National Natural Science Foundation of China(No.20374005)China Petroleum &Chemical Corporation.
文摘Anionic polymerization of methyl methacrylate (MMA), n-butyl methacrylate (nBMA) and glycidyl methacrylate (GMA) initiated by nBuCu(NCy2)Li (1) in tetrahydrofuran (THF) at -50 degrees C to -10 degrees C was investigated. It was found that the polymerization of MMA and nBMA initiated by 1 proceeded quantitatively in THF to afford PMMA and PBMA with polydispersity index 1.15-1.30 and nearly 100% initiator efficiencies at -10 degrees C. The molecular weights increased linearly with the ratio of [monomer]/[1]. However, a post-polymerization experiment carried out on this system revealed a double polymer peak by GPC when fresh monomer was added after an interval of 10 min. Polymerization of styrene could be initiated by 1, but the initiator efficiency was low.
基金The Project is supported by the National Natural Science Foundation of China (Grant No. 29634010-2), Shanghai Education Development Foundation Shuguang Program (Project SG97008) and Research Institute of Beijing Yanshan Petrochemical Corporation.
文摘Alpha-trichloroacetoxy terminated polystyrene oligomer (PS-CH2CH2OCOCCl3) and poly-(styrene-b-butadiene) oligomer [P(S-b-B)-CH2CH2OCOCCl3)] were synthesized by living anionic polymeri-zation using n-butyllithium as initiator. Then the PS-CH2CH2OCOCCl3 (PS-Cl-3) or P(S-b-B)-CH2CH2O-COCCl3 (PSB-Cl-3) was used as the macroinitiator in the polymerization of(meth)acrylates in the presence of CuX/bpy. AB diblock and ABC triblock copolymers were prepared by the integrated living anionic polymerization (LAP)-atom transfer radical polymerization (ATRP). The structures of the PSB-Cl-3 and the P(S-b-MMA) were identified by FTIR and H-1-NMR spectrum, respectively. A new way to design block copolymers (the combination of LAP and ATRP) was developed.
文摘A new cyclic monomer, 2-methyl-2-methocycarbonyl-5-methylene 1,3-dioxlan-4-one,wassynthesized successfully. The monomer and intermediate were characterized by ~1H NMR,^(13)C NMR, INEPT (Intensive Nuclei Enhanced by Polarization Transfer) technique, IR andelemental analysis. Anionic polymerization of the monomer was carried out in anhydrous THF at.70℃, and 9-fluorenyllithium was used as initiator. The polymer strucure was determined byIR, NMR and elemental analysis. Molecular weight of the polymer was estimated by viscositymeasurement in DMSO at 30℃.
文摘A new cyclic monomer, 2-methyl-2-methoxycarbonyl-5-methylene-1,3-dioxolan-4-one,was synthesized successfully. The monomer and intermediate were characterized by ~1H NMR, ^(13)CNMR, INEPT(Intensive Nuclei Enhanced by Polarization Transfer) technique, IR and elementalanalysis. Anionic polymerization of the monomer was carried out in anhydrous THF at -70℃,and 9-fluorenyllithium was used as initiator. The polymer structure was determined by IR, NMRand elemental analysis. Molecular weight of the polymer was estimated by viscosity measurementin DMSO at 30℃.
基金This work was supported by the National Natural Science Foundation of China (No. 29974034).
文摘Some chiral binaphthyl crown ethers were synthesized. The anionic polymerization of methyl methacrylate (MMA) was carried out in the presence of t-BuOK, Ph2CHK or Ph2CHNa (RM), and RM coordination initiator by using chiral binaphthyl crown ethers as ligands, respectively. The results showed that in the former case the PMMA obtained has mainly isotactic structure but without optical activity, while in the later case the PMMA produced predominately has syndiotactic structure also without optical activity.
基金This work was financially supported by the National Natural Science Foundation of China(No.50373037).
文摘20 wt% polyamide 12 （PA1212） pellets were dissolved in molten caprolactam. The caprolactam was then catalyzed at 180℃ and polymerized by means of anionic ring-opening polymerization to produce in situ blends of the resultant polyamide 6 （PA6） and PA 1212. Mechanical blends with same ingredient were prepared through melt blending on a twin-screw extruder. Scanning electron microscopy （SEM） observation revealed that contrary to the mechanical blends with small spherulites embedded in the matrix, no phase-separation existed in the in situ blends. The results of thermal analysis by differential scanning calorimetry （DSC） showed that single melting peak and crystallization peak existed for the in situ blends, while two melting and crystallization peaks appeared for the mechanical blends. The in situ blend film and the mixed blend film, both cast from a dilute formic acid solution with a concentration of 0.5 g/L, remained similar crystallization and melting behavior as above. It is proved by solution 13C-NMR analysis that transamidation took place during the in situ blending, and it is suggested that the combination of temperature increasing and the basic surrounding derived from NaOH during polymerization resulted in the occurrence of transamidation. Furthermore, it is proposed that the interchange reaction between PA 1212 and PA6 also resulted from the degradative reaction during the anionic polymerization.
基金Supported by the National Natural Science Foundation of China(No50373037)
文摘A noncrystallizable semiaromatic polyamide copolymer（NSAP） was dissolved in molten caprolactam, and PA6/ NSAP blends were produced in-situ via the anionic ring-opening polymerization of caprolactam. The presence of a single loss tangent（tanS） peak measured by means of dynamic mechanical analysis（DMA） proves the miscibility between PA6 and NSAP in the blends. It was found that there existed drastic changes in the crystallographic form and crystallization kinetics for the in-situ blends, e.g. , when 20% NSAP was added, nearly all crystallites existed in the ,y form and the crystallization could hardly occur upon cooling even at a rate of 2.5 ℃/min. Moreover, cold crystallization appears during the subsequent heating, and its melting point is 40 ℃ lower than that of the virgin system. On the other hand, the size of the spherulites only decreases modestly. It is suggested that the introduction of irregular stiff segments originated from NSAP into PA6 macromolecule chain, which resulted from transamidation during the polymerization play a dominant role in the drastic change of crystallization kinetics and the resultant morphology of the in-situ blends.
基金Financial supports for this work from the Nature Science Foundation of China for the Major Program （No. 50933002）, the National High Technology Re-search and Development Program of China （863 Pro-gram, No. 2012AA040306） and Shanghai Leading Academic Discipline Project （No. B502） are gratefully acknowledged.
文摘This work confirms the new view of the initiation and propagation mechanism of the anionic polymerization previously proposed, based on the investigation of anionic bulk-polymerization of styrene and α-methyl styrene with the help of a self designed microflow device and characterized by GPC and in situ ^7Li NMR. It was found that n-BuLl tended to form the hexameric-aggregated structure and even to form the huge aggregated structure based on the former. These aggregations of initiators could directly initiate the anionic polymerization and form the su-pramolecule aggregations. The supramolecule aggregations inevitably blocked the diffusion of the monomers to the ion-pairs and resulted in a stationary-conversion platform. Then the aggregators were dissociated completely into equal binary-aggregated species, and the polymerization continued again rapidly before the termination. Tetrahy-drofuran （THF） acted as the electron donator, which could push the electron cloud to Li cation and make the aggre- gated ring of the active species rather loosened and facilitated the monomer to insert in. Therefore, a little THF can greatly promote the anionic polymerization. However, further addition of THF might block the channel between the ion-pairs and decrease the propagation rate. It was also found that the aggregated structure of the active species during the anionic polymerization only depends on the initiator aggregations which were formed before the polym-erization.
基金We gratefully acknowledge the National Natural Science Foundation of China(No.21172186)for finan-cial support of this work.
文摘(−)-Menthyl(S)-6'-acrylyl-2'-methyloxy-1,1'-binaphthalene-2-carboxylate(3)was synthesized and anionically polymerized using n-BuLi as an initiator in toluene.The monomer 3 was levorotatory and had an[α]_(D)^(25)value of−72.4,but its corresponding polymer poly-3 was dextrorotatory and showed an[α]_(D)^(25)value of+162.0.Poly-3 was confirmed to exist in the form of one-handed helical structure in solution by means of comparing the specific optical rotation and the CD spectra with that of 3 and the model compounds such as(−)-menthyl(S)-6'-propionyl-2'-methyloxy-1,1'-binaphthalene-2-carboxylate 2b and(−)-menthyl(S)-6'-heptanoyl-2'-methyloxy-1,1'-binaphthalene-2-carboxylate 2c.This conclusion was also confirmed by the fact that the g-value of poly-3 is about 11 times of that of monomer 3.
基金financially supported by the open project program of Key Laboratory of Environmentally Friendly ChemistryApplications of the Ministry of Education,China(No.09HJYH04)Xiangtan University Doctoral Scientific Research Fund
文摘The anionic polymerization of N-vinylcarbazole（NVC） by using optically active anionic initiators such as the lithium salts of（S）-1-（9H-fluoren-2-yl）-4-isopropyl-4,5-dihydrooxazole（（S）-1-FIDH） and（S）-2-（9H-fluoren-2-yl）-4-isopropyl-4,5-dihydrooxazole（（S）-2-FIDH） and complexes of（-）-Sparteine with n-butylithium（n-Bu Li-（-）-Sp） or fluorenyl lithium（FILi-（-）-Sp） was achieved. The yield and specific rotation of poly（N-vinylcarbazole）s（poly（NVC）s） were considerably affected by the molar ratio of（S）-FIDH to NVC. The highest yield and specific rotation were obtained with Li-（S）-1-FIDH as an initiator, with a molar ratio of monomer and initiator [M]/[I] = 10/1. The effects of the chiral initiators, type of solvent and the polymerization temperature were investigated. The obtained optical activity of polymers was attributed to asymmetric induction of the chiral initiators.
