A separation methodology to isolate natural uranium from its radioactive daughters： Th, Ra, Bi, Pb, Pa and Po, was developed using an only one anion exchange resin and varying concentrations of HC1 solutions. Three t...A separation methodology to isolate natural uranium from its radioactive daughters： Th, Ra, Bi, Pb, Pa and Po, was developed using an only one anion exchange resin and varying concentrations of HC1 solutions. Three types of anion exchange resins were tested and the separation process was followed by gamma and alpha spectrometry. Uranium can be quantitatively isolated from its descendants using Dowex IX8 （20-50 mesh） or Amerlite IRA （100 mesh） resins in three steps： using 4 and 8 mol/L-1 HCI and water to recover uranium. The method is easy, quick, and inexpensive.展开更多
Anion exchange membrane(AEM),as a kind of key membrane materials,has shown great application potential in many electrochemical fields,and remarkable progress has been made in related research in recent years.In this p...Anion exchange membrane(AEM),as a kind of key membrane materials,has shown great application potential in many electrochemical fields,and remarkable progress has been made in related research in recent years.In this paper,the research status of AEM is reviewed,including its material design,preparation method,performance optimization and application in the fields of hydrogen production by electrolytic water,fuel cell and water treatment.In terms of material design,new polymer skeleton structures are emerging to regulate the stability of ion conduction channels and membranes by introducing specific functional groups or changing the molecular chain structure.The preparation methods have been gradually expanded from the traditional solution casting method to more advanced technologies,such as interfacial polymerization and electrostatic spinning,which effectively improve the microstructure and property uniformity of the film.Performance optimization focuses on improving ion conductivity,reducing membrane swelling rate and enhancing chemical stability,and a variety of modification strategies are developed and applied.Despite the achievements made so far,there are still some challenges,such as the lack of long-term stability in highly alkaline environments.Future research needs to further explore new material systems and preparation processes in order to promote the wide application and sustainable development of AEM technology in energy,environmental protection and other fields.展开更多
Anion-exchange membrane water electrolysers(AEMWEs)and fuel cells(AEMFCs)are critical technologies for converting renewable resources into green hydrogen(H_(2)),where anion-exchange membranes(AEMs)play a vital role in...Anion-exchange membrane water electrolysers(AEMWEs)and fuel cells(AEMFCs)are critical technologies for converting renewable resources into green hydrogen(H_(2)),where anion-exchange membranes(AEMs)play a vital role in efficiently transporting hydroxide ions(OH^(-))and minimizing fuel crossover,thus enhancing overall efficiency.While conventional AEMs with linear,side-chain,and block polymer architectures show promise through functionalization,their long-term performance remains a concern.To address this,hyperbranched polymers offer a promising alternative due to their three-dimensional structure,higher terminal functionality,and ease of functionalization.This unique architecture provides interconnected ion transport pathways,fractional free volume,and enhanced long-term stability in alkaline environments.Recent studies have achieved conductivities as high as 304.5 mS cm^(-1),attributed to their improved fractional free volume and microphase separation in hyperbranched AEMs.This review explores the chemical,mechanical,and ionic properties of hyperbranched AEMs in AEMFCs and assesses their potential for application in AEMWEs.Strategies such as blending and structural functionalisation have significantly improved the properties by promoting microphase separation and increasing the density of cationic groups on the polymer surface.The review provides essential insights for future research,highlighting the challenges and opportunities in developing high-performance hyperbranched AEMs to advance hydrogen energy infrastructure.展开更多
The aim of this study was to develop a novel pharmaceutical excipient:an anion exchange resin.Initially,polystyrenedivinylbenzene(PS-DVB)microspheres were synthesized via suspension polymerization.Subsequently,these m...The aim of this study was to develop a novel pharmaceutical excipient:an anion exchange resin.Initially,polystyrenedivinylbenzene(PS-DVB)microspheres were synthesized via suspension polymerization.Subsequently,these microspheres served as a substrate for chloromethylation using methanol,formaldehyde,and chlorosulfonic acid.By optimizing the reaction conditions,the chloromethylated microspheres were characterized using infrared spectroscopy,scanning electron microscopy,and the Mohr method.Under optimal reaction conditions,the resulting products exhibited uniformity and spherical morphology,with an average particle size of approximately 190μm.The PS-DVB microspheres effectively incorporated chloromethyl groups,as evidenced by a chlorine content of 14.67%.Scanning electron microscopy analysis indicated that the appearance of the microspheres remained largely unchanged post-reaction.Overall,the research findings demonstrated the successful preparation of the anion exchange resin.Characterization and quality assessment confirmed that the ion exchange resin met the required standards.展开更多
The global drive for sustainable energy solutions intensified interest in anion exchange membrane water electrolysis(AEMWE),as a promising hydrogen production pathway,leveraging renewable energy sources.However,widesp...The global drive for sustainable energy solutions intensified interest in anion exchange membrane water electrolysis(AEMWE),as a promising hydrogen production pathway,leveraging renewable energy sources.However,widespread adoption is hindered by the high cost and non-optimised design of crucial components,such as porous transport layers(PTL)and flow fields.This study comprehensively investigates the interplay between structure,mechanics,and electrochemical performance of a low-cost knitted wire mesh PTL,focusing on its potential to enhance cell assembly and operation.Electrochemical characterisation was performed on a single 4 cm^(2)cell,using 1M KOH at 60℃.Knitted wire mesh PTL,characterised by approximately 70%porosity,2mm thickness,and 1.098 tortuosity,delivered a 33%improvement in current density compared to the standard cell configuration.Introducing a knitted PTL interlayer reduced cell voltage by 74 mV at 2 A cm^(−2)by improving compression force distribution across the active area,enhancing gas transport and maintaining optimal electrical and thermal conductivity.These findings highlight the significant potential of innovative PTL designs in AEMWE to improve mechanical and operational efficiency without increasing the cost.展开更多
Anion exchange membranes(AEMs)combining high hydroxide conductivity and alkali-resistant stability have become a major challenge for the long-term development of anion exchange membrane fuel cells(AEMFCs).Here,we desi...Anion exchange membranes(AEMs)combining high hydroxide conductivity and alkali-resistant stability have become a major challenge for the long-term development of anion exchange membrane fuel cells(AEMFCs).Here,we designed a series of poly(mequitazine-terphenyl piperidinium)(QPMTP-X)AEMs with dual-functionalized quaternary ammonium cations by introducing a certain proportion of large steric hindrance mequitazine(MEQ)molecular building unit into the poly(aryl piperidinium)backbone.QPMTP-X retains the excellent mechanical properties of the poly(aryl piperidinium),while also combining the alkaline stability and high ionic conductivity exhibited by MEQ with flexible quinuclidinium side chains,achieving an overall improvement of membrane performance.Notably,QPMTP-30 exhibits an ultra-high conductivity of up to 206.83 mS cm^(-1)and excellent alkaline stability(over 95%conductivity is maintained after 1000 h of conditioning in 2 M NaOH at 80℃).In fuel cell performance test,QPMTP-30 achieves a peak power density(PPD)of 974.5 mW cm^(-2)and operates stably at 80℃for more than 60 h(0.1 A cm^(-2)).Incorporating large steric hindrance building blocks and multi-cations into the poly(aryl piperidinium)backbone not only synergizes the development of highperformance AEMs but also opens up new ideas for the structural design of future AEMs.展开更多
Anion exchange membrane water electrolysis(AEMWE)synergize the kinetic merits of alkaline systems,zero-gap configurations and compatibility with non-noble metal catalysts,offering a promising pathway toward green hydr...Anion exchange membrane water electrolysis(AEMWE)synergize the kinetic merits of alkaline systems,zero-gap configurations and compatibility with non-noble metal catalysts,offering a promising pathway toward green hydrogen production.Nevertheless,practical exploitation was hindered by critical challenges:inferior alkaline stability,insufficient mechanical integrity,and detrimental hydrogen crossover of anion exchange membranes(AEMs),which compromise both device durability and operational safety.Here,we engineered a porous expanded polytetrafluoroethylene(e-PTFE)-reinforced poly(arylene quinuclidinium)membrane that enhances AEM mechanical robustness,prevents stress-induced rupture,and suppresses hydrogen crossover during electrolyzer operation.Specifically,the reinforced poly(arylene quinuclidinium)membrane(R-PTPQui)exhibited a tensile strength of 56 MPa and an elongation at break of 55%.Moreover,it effectively reduced hydrogen permeation in the electrolyzer,achieving an extremely low H_(2)-to-O_(2)(HTO)value of 0.44 vol%at 0.1 A·cm^(-2).The R-PTPQui-based electrolyzer achieved a high current density of 4.9 A·cm^(-2)at 2.0 V and a Faradaic efficiency of 98.6%using a non-precious anode catalyst.These advances significantly strength the compatibility of poly(arylene quinuclidinium)-based AEMs for industrial-scale green hydrogen generation.展开更多
The development of alkaline fuel cells is moving forward at an accelerated pace,and the application of ether-free bonded polymers to anion exchange membranes(AEMs)has been widely investigated.However,the question of ...The development of alkaline fuel cells is moving forward at an accelerated pace,and the application of ether-free bonded polymers to anion exchange membranes(AEMs)has been widely investigated.However,the question of the“trade-off”between AEM ionic conductivity and dimensional stability remains difficult.The strategy of inducing microphase separation to improve the performance of AEM has attracted much attention recently,but the design of optimal molecular structures is still being explored.Here,this work introduced different ratios of 3-bromo-1,1,1-trifluoroacetone(x=40,50,and 60)into the main chain of poly(p-terphenylene isatin).Because fluorinated groups have excellent hydrophobicity,hydrophilic hydroxyl-containing side chains are introduced to jointly adjust the formation of phase separation structure.The results show that PTI-PTF_(50)-NOH AEM with the appropriate fluorinated group ratio has the best ionic conductivity and alkali stability under the combined effect of both.It has an ionic conductivity of 133.83 mS cm^(-1)at 80°C.In addition,the OH-conductivity remains at 89%of the initial value at 80°C and 3 M KOH for 1056 h of immersion.The cell polarization curve based on PTI-PTF_(50)-NOH shows a power density of 734.76 mW cm^(-2)at a current density of 1807.7 mA cm^(-2).展开更多
Anion exchange membrane fuel cells(AEMFCs)are considered a more affordable technology compared to proton exchange membrane fuel cells(PEMFCs),but the performance and durability of AEMFCs are still not competent with P...Anion exchange membrane fuel cells(AEMFCs)are considered a more affordable technology compared to proton exchange membrane fuel cells(PEMFCs),but the performance and durability of AEMFCs are still not competent with PEMFCs owing to the more challenging water management,which severely hinders its development and real-life applications.In this study,we introduce the strategy to boost the performance and stability of the membrane electrode assembly(MEA)of AEMFCs by regulating the hydrophilicity of the anode and cathode ionomers.Two poly(biphenyl alkylene)ionomers with different hydrophilicity are synthesized and used to fabricate MEAs with asymmetric or symmetric ionomer configurations in the anodic and cathodic catalyst layers(CLs)for AEMFCs.Molecular dynamics(MD)simulations have revealed different diffusion rates of water in the hydrophobic anode and the hydrophilic cathode,which show the potential of this design to improve water management in AEMFCs,The effectiveness of this design is also confirmed by experimental results that the MEA with this asymmetric configuration exhibits the highest power and current densities of 1.58 W cm^(-2)or 5.58 A cm^(-2),respectively,among all configurations.Furthermore,this configuration also enhances the durability,with the MEA showing a voltage decay rate of only 313.1μV h^(-1)after 500 h of in-situ durability test at 0.2 A cm^(-2).This study provides new insights into the rational design of more efficient water management in MEA for high-performance AEMFCs.展开更多
Aim To study the exchange reaction characteristics of anion exchange resin for diclofenac sodium. Methods The drug-resin complexes were prepared by a batch method with diclofenac sodium as the model drug and the stron...Aim To study the exchange reaction characteristics of anion exchange resin for diclofenac sodium. Methods The drug-resin complexes were prepared by a batch method with diclofenac sodium as the model drug and the strong anion exchange resin (201 × 7) as the carrier. The effects of different forms (OH~ - and Cl~ - ) of the strong anion exchange resin, the particle size of the resin, and the reaction temperature on the exchange behavior were described. The exchange kinetic profiles were fitted. The related exc...展开更多
Removal of Cr（VI） from aqueous solution by strong alkaline anion exchange fiber （SAAEF） was achieved using batch adsorption experiments. The effect of contact time, initial Cr（VI） concentration and pH was invest...Removal of Cr（VI） from aqueous solution by strong alkaline anion exchange fiber （SAAEF） was achieved using batch adsorption experiments. The effect of contact time, initial Cr（VI） concentration and pH was investigated. The results showed that the maximum adsorption capacity of SAAEF was 187.7 mg/g at pH=1.0. The adsorption capacity increased with Cr（VI） concentration but decreased with pH value when pH〉1.0. Adsorption isotherms at various temperatures were obtained. Langmuir, Freundlich, Dubinin-Radushkevich and Temkin models were adopted and the equilibrium data fitted best with the Langmuir isotherm. The constants of these models indicated that the adsorption process involved both chemisorption and physisorption. The values of thermodynamic parameters, including DH, DG and DS, suggested that the adsorption of Cr（VI） on SAAEF was a spontaneous, entropy-driven and endothermic process. Q（iso） was not a constant value, which indicated an inhomogenous energy distribution on SAAEF.展开更多
We fabricated and characterized two hybrid adsorbents originated from hydrated ferric oxides （HFOs） using a polymeric anion exchanger D201 and calcite as host. The resultant adsorbents （denoted as HFO-201 and IOCCS...We fabricated and characterized two hybrid adsorbents originated from hydrated ferric oxides （HFOs） using a polymeric anion exchanger D201 and calcite as host. The resultant adsorbents （denoted as HFO-201 and IOCCS） were employed for Sb（V） removal from water. Increasing solution pH from 3 to 9 apparently weakened Sb（V） removal by both composites, while increasing temperature from 293 to 313 K only improved Sb（V） uptake by IOCCS. HFO-201 exhibited much higher capacity for Sb（V） than for IOCCS in the absence of other anions in solution. Increasing ionic strength from 0.01 to 0.1 mol/L NaNO3 would result in a significant drop of the capacity of HFO-201 in the studied pH ranges; however, negligible effect was observed for 1OCCS under similar conditions. Similarly, the competing chloride and sulfate pose more negative effect on Sb（V） adsorption by HFO-201 than by IOCCS, and the presence of silicate greatly decreased their adsorption simultaneously, while calcium ions were found to promote the adsorption of both adsorbents. XPS analysis further demonstrated that preferable Sb（V） adsorption by both hybrids was attributed to the inner sphere complexation of Sb（V） and HFO, and Ca（II） induced adsorption enhancement possibly resulted from the formation of HFO-Ca-Sb complexes. Column adsorption runs proved that Sb（V） in the synthetic water could be effectively removed from 30 μg/L to below 5μg/L （the drinking water standard regulated by China）, and the effective treatable volume of IOCCS was around 6 times as that of HFO-201, implying that HFO coatings onto calcite might be a more effective approach than immobilization inside D201.展开更多
This study investigated the removal of dissolved organic matter（DOM） from real dyeing bio-treatment effluents（DBEs） with the use of a novel magnetic anion exchange resin（NDMP）.DOMs in two typical DBEs were fract...This study investigated the removal of dissolved organic matter（DOM） from real dyeing bio-treatment effluents（DBEs） with the use of a novel magnetic anion exchange resin（NDMP）.DOMs in two typical DBEs were fractionized using DAX-8/XAD-4 resin and ultrafiltration membranes. The hydrophilic fractions and the low molecular weight（MW）（〈3 kDa） DOM fractions constituted a major portion（〉50%） of DOMs for the two effluents. The hydrophilic and low MW fractions of both effluents were the greatest contributors of specific UV254absorbance（SUVA254）,and the SUVA254 of DOM fractions decreased with hydrophobicity and MW. Two DBEs exhibited acute and chronic biotoxicities. Both acute and chronic toxicities of DOM fractions increased linearly with the increase of SUVA254 value. Kinetics of dissolved organic carbon（DOC） removal via NDMP treatment was performed by comparing it with that of particle active carbon（PAC）. Results indicated that the removal of DOC from DBEs via NDMP was 60%,whereas DOC removals by PAC were lower than 15%. Acidic organics could be significantly removed with the use of NDMP. DOM with large MW in DBE could be removed significantly by using the same means. Removal efficiency of NDMP for DOM decreased with the decrease of MW. Compared with PAC,NDMP could significantly reduce the acute and chronic bio-toxicities of DBEs. NaCl/NaOH mixture regenerants,with selected concentrations of 10% NaCl（m/m）/1%NaOH（m/m）,could improve desorption efficiency.展开更多
A fibrous strong base anion exchanger （QAPPS） was prepared for the first time via chloromethylation and quaternary amination reaction of polyphenylene sulfide fiber （PPS）, and its physical-chemical structure and a...A fibrous strong base anion exchanger （QAPPS） was prepared for the first time via chloromethylation and quaternary amination reaction of polyphenylene sulfide fiber （PPS）, and its physical-chemical structure and adsorption behavior for Cr（VI） were characterized by FT- IR, Energy Dispersive Spectrometry, TG-DTG, elemental analysis and batch adsorptive technique, respectively. The novel fibrous adsorbent could effectively adsorb Cr（VI） over the pH range 1-12, the maximum adsorption capacity was 166.39 mg/g at pH 3.5, and the adsorption behavior could be described well by Langmuir isotherm equation model. The adsorption kinetics was studied using pseudo first-order and pseudo second-order models, and the 4/2 and equilibrium adsorption time were 5 and 20 min respectively when initial Cr（VI） concentration was 100 mg/L. The saturated fibers could be regenerated rapidly by a mixed solution of 0.5 mol/L NaOH and 0.5 mol/L NaCl, and the adsorption capacity was well maintained after six adsorption-desorption cycles.展开更多
Primary canalicular bile undergoes a process of fluidization and alkalinization along the biliary tract that is influenced by several factors including hormones, innervation/neuropeptides, and biliary constituents. Th...Primary canalicular bile undergoes a process of fluidization and alkalinization along the biliary tract that is influenced by several factors including hormones, innervation/neuropeptides, and biliary constituents. The excretion of bicarbonate at both the canaliculi and the bile ducts is an important contributor to the generation of the so-called bile-salt independent flow. Bicarbonate is secreted from hepatocytes and cholangiocytes through parallel mechanisms which involve chloride efflux through activation of Cl- channels, and further bicarbonate secretion via AE2/SLC4A2-mediated Cl-/HCO3- exchange. Glucagon and secretin are two relevant hormones which seem to act very similarly in their target cells （hepatocytes for the former and cholangiocytes for the latter）. These hormones interact with their specific G protein-coupled receptors, causing increases in intracellular levels of cAMP and activation of cAMP-dependent Cl- and HCO3- secretory mechanisms. Both hepatocytes and cholangiocytes appear to have cAMP-responsive intracellular vesicles in which AE2/SLC4A2 colocalizes with cell specific Cl- channels （CFTR in cholangiocytes and not yet determined in hepatocytes） and aquaporins （AQP8 in hepatocytes and AQP1 in cholangiocytes）, cAMP-induced coordinated trafficking of these vesicles to either canalicular or cholangiocyte lumenal membranes and further exocytosis results in increased osmotic forces and passive movement of water with net bicarbonate-rich hydrocholeresis.展开更多
Green hydrogen produced by water electrolysis combined with renewable energy is a promising alternative to fossil fuels due to its high energy density with zero-carbon emissions.Among water electrolysis technologies,t...Green hydrogen produced by water electrolysis combined with renewable energy is a promising alternative to fossil fuels due to its high energy density with zero-carbon emissions.Among water electrolysis technologies,the anion exchange membrane(AEM) water electrolysis has gained intensive attention and is considered as the next-generation emerging technology due to its potential advantages,such as the use of low-cost non-noble metal catalysts,the relatively mature stack assembly process,etc.However,the AEM water electrolyzer is still in the early development stage of the kW-level stack,which is mainly attributed to severe performance decay caused by the core component,i.e.,AEM.Here,the review comprehensively presents the recent progress of advanced AEM from the view of the performance of water electrolysis cells.Herein,fundamental principles and critical components of AEM water electrolyzers are introduced,and work conditions of AEM water electrolyzers and AEM performance improvement strategies are discussed.The challenges and perspectives are also analyzed.展开更多
An anion exchange resin NDP-5 has been prepared successfully and applied on the selective removal of nitrate from SO_4^（2-）/ NO_3^- binary co-existence system.The composition and morphology of NDP-5 were confirmed b...An anion exchange resin NDP-5 has been prepared successfully and applied on the selective removal of nitrate from SO_4^（2-）/ NO_3^- binary co-existence system.The composition and morphology of NDP-5 were confirmed by FT-IR and SEM.The NDP-5 resin exhibits the completely different behavior on the adsorption capacity,adsorption kinetic and the effect of the completing anion in the absence or presence of sulfate,compared to D213.And,the resultants of kinetic are well fitted by the pseudo-first-order and pseudo-second-order models.These results are very important to develop novel resins with great features.展开更多
A growth chamber study was conducted to determine the relationships between the supply of soil available nitrogen (N) and sulfur (S) and canola (Brassica napus) and wheat (Triticum aestivum L. 'Biggar') N and ...A growth chamber study was conducted to determine the relationships between the supply of soil available nitrogen (N) and sulfur (S) and canola (Brassica napus) and wheat (Triticum aestivum L. 'Biggar') N and S uptake and yield in three Western Canadian soils. The suitability of one-hour burial with an anion exchange membrane (AEM) was assessed for its utility as a quick test of the available N:S balance in the soil. Canola and wheat were grown on a Luvisolic soil low in available S and on Brown and Black Chernozemic soils low in both available N and S, with different rates and combinations of N and S fertilizers applied. AEM burial was used to assess soil available nitrate and sulfate supply rates after fertilization. Dry matter yield and N and S concentrations in plant tissues were determined after 6 weeks of growth. The soil available N:S ratio determined by AEM burial closely reflected the relative supplies of available N and S as revealed in the N:S ratios of plant tissue dry matter. The highest yields were achieved where the available N:S ratio in soil and plant tissue ranged from 5 to 13. Thus, a one-hour burial of an AEM probe in the field may be a useful tool to quickly test if a balanced N and S supply is present in the soil for optimum crop yield.展开更多
An improved method,suitable for collecting nitrate from surface waters in the watershed for 15 N isotope tracing analysis,was developed on the basis of the anion exchange coupled with diffusion through systematic simu...An improved method,suitable for collecting nitrate from surface waters in the watershed for 15 N isotope tracing analysis,was developed on the basis of the anion exchange coupled with diffusion through systematic simulation and comparison experiments.The results showed that the nitrate could be separated and enriched from the waters efficiently by using the improved method.Being simple and practical in operation principle and procedures,cost-economic,and highly efficient in nitrate separation/enrichment,the method met the requirements of δ 15 N mass spectrum analysis and would lay a foundation for the application of 15 N isotope tracing approach to the research on non-point source pollution in watershed.展开更多
文摘A separation methodology to isolate natural uranium from its radioactive daughters： Th, Ra, Bi, Pb, Pa and Po, was developed using an only one anion exchange resin and varying concentrations of HC1 solutions. Three types of anion exchange resins were tested and the separation process was followed by gamma and alpha spectrometry. Uranium can be quantitatively isolated from its descendants using Dowex IX8 （20-50 mesh） or Amerlite IRA （100 mesh） resins in three steps： using 4 and 8 mol/L-1 HCI and water to recover uranium. The method is easy, quick, and inexpensive.
基金“Grassland Talents”of Inner Mongolia Autonomous Region,Young Talents of Science and Technology in Universities of Inner Mongolia Autonomous Region(NJYT23030)Technology Breakthrough Engineering Hydrogen Energy Field“Unveiling and Leading”Project(2024KJTW0018)+3 种基金“Steed Plan High Level Talents”of Inner Mongolia University,Carbon neutralization research project(STZX202218)National Natural Science Foundation of China(U22A20107),Inner Mongolia Autonomous Region Natural Science Foundation(2023MS02002)Guangdong Provincial Key Laboratory of Materials and Technologies for Energy Conversion(MATEC2024KF011)National Key R&D Program of China(2022YFA1205201).
文摘Anion exchange membrane(AEM),as a kind of key membrane materials,has shown great application potential in many electrochemical fields,and remarkable progress has been made in related research in recent years.In this paper,the research status of AEM is reviewed,including its material design,preparation method,performance optimization and application in the fields of hydrogen production by electrolytic water,fuel cell and water treatment.In terms of material design,new polymer skeleton structures are emerging to regulate the stability of ion conduction channels and membranes by introducing specific functional groups or changing the molecular chain structure.The preparation methods have been gradually expanded from the traditional solution casting method to more advanced technologies,such as interfacial polymerization and electrostatic spinning,which effectively improve the microstructure and property uniformity of the film.Performance optimization focuses on improving ion conductivity,reducing membrane swelling rate and enhancing chemical stability,and a variety of modification strategies are developed and applied.Despite the achievements made so far,there are still some challenges,such as the lack of long-term stability in highly alkaline environments.Future research needs to further explore new material systems and preparation processes in order to promote the wide application and sustainable development of AEM technology in energy,environmental protection and other fields.
基金UKRI financial support under grant number EP/Y026098/1 for Global Hydrogen Production Technologies(HyPT)Center。
文摘Anion-exchange membrane water electrolysers(AEMWEs)and fuel cells(AEMFCs)are critical technologies for converting renewable resources into green hydrogen(H_(2)),where anion-exchange membranes(AEMs)play a vital role in efficiently transporting hydroxide ions(OH^(-))and minimizing fuel crossover,thus enhancing overall efficiency.While conventional AEMs with linear,side-chain,and block polymer architectures show promise through functionalization,their long-term performance remains a concern.To address this,hyperbranched polymers offer a promising alternative due to their three-dimensional structure,higher terminal functionality,and ease of functionalization.This unique architecture provides interconnected ion transport pathways,fractional free volume,and enhanced long-term stability in alkaline environments.Recent studies have achieved conductivities as high as 304.5 mS cm^(-1),attributed to their improved fractional free volume and microphase separation in hyperbranched AEMs.This review explores the chemical,mechanical,and ionic properties of hyperbranched AEMs in AEMFCs and assesses their potential for application in AEMWEs.Strategies such as blending and structural functionalisation have significantly improved the properties by promoting microphase separation and increasing the density of cationic groups on the polymer surface.The review provides essential insights for future research,highlighting the challenges and opportunities in developing high-performance hyperbranched AEMs to advance hydrogen energy infrastructure.
基金2023 Nantong Jianghai Talents Project,the Nantong Social Livelihood Science and Technology Plan for 2023the 2022 New Drugs and Platform Enhancement Project of the Yangtze Delta Drug Advanced Research Institute.Additionally,support was provided by the Zhenjiang Science and Technology Project(Grant No.SH2020048)+2 种基金the China Postdoctoral Science Foundation(Grant No.2020M681532)the Jiangsu Planned Projects for Postdoctoral Research Funds(Grant No.2020Z209)the Natural Science Research Projects of Universities in Jiangsu Province(Grant No.20KJD350001).
文摘The aim of this study was to develop a novel pharmaceutical excipient:an anion exchange resin.Initially,polystyrenedivinylbenzene(PS-DVB)microspheres were synthesized via suspension polymerization.Subsequently,these microspheres served as a substrate for chloromethylation using methanol,formaldehyde,and chlorosulfonic acid.By optimizing the reaction conditions,the chloromethylated microspheres were characterized using infrared spectroscopy,scanning electron microscopy,and the Mohr method.Under optimal reaction conditions,the resulting products exhibited uniformity and spherical morphology,with an average particle size of approximately 190μm.The PS-DVB microspheres effectively incorporated chloromethyl groups,as evidenced by a chlorine content of 14.67%.Scanning electron microscopy analysis indicated that the appearance of the microspheres remained largely unchanged post-reaction.Overall,the research findings demonstrated the successful preparation of the anion exchange resin.Characterization and quality assessment confirmed that the ion exchange resin met the required standards.
基金supported by the European Union and the Clean Hydrogen Joint Undertaking(Grant no.101112055).
文摘The global drive for sustainable energy solutions intensified interest in anion exchange membrane water electrolysis(AEMWE),as a promising hydrogen production pathway,leveraging renewable energy sources.However,widespread adoption is hindered by the high cost and non-optimised design of crucial components,such as porous transport layers(PTL)and flow fields.This study comprehensively investigates the interplay between structure,mechanics,and electrochemical performance of a low-cost knitted wire mesh PTL,focusing on its potential to enhance cell assembly and operation.Electrochemical characterisation was performed on a single 4 cm^(2)cell,using 1M KOH at 60℃.Knitted wire mesh PTL,characterised by approximately 70%porosity,2mm thickness,and 1.098 tortuosity,delivered a 33%improvement in current density compared to the standard cell configuration.Introducing a knitted PTL interlayer reduced cell voltage by 74 mV at 2 A cm^(−2)by improving compression force distribution across the active area,enhancing gas transport and maintaining optimal electrical and thermal conductivity.These findings highlight the significant potential of innovative PTL designs in AEMWE to improve mechanical and operational efficiency without increasing the cost.
基金financial support of this work by the Natural Science Foundation of China(Grant Nos.U24A20505,52473205)Chang Bai Mountain Scholars Program of Jilin Province and Jilin Provincial Science&Technology Department(Grant No.YDZJ202401357).
文摘Anion exchange membranes(AEMs)combining high hydroxide conductivity and alkali-resistant stability have become a major challenge for the long-term development of anion exchange membrane fuel cells(AEMFCs).Here,we designed a series of poly(mequitazine-terphenyl piperidinium)(QPMTP-X)AEMs with dual-functionalized quaternary ammonium cations by introducing a certain proportion of large steric hindrance mequitazine(MEQ)molecular building unit into the poly(aryl piperidinium)backbone.QPMTP-X retains the excellent mechanical properties of the poly(aryl piperidinium),while also combining the alkaline stability and high ionic conductivity exhibited by MEQ with flexible quinuclidinium side chains,achieving an overall improvement of membrane performance.Notably,QPMTP-30 exhibits an ultra-high conductivity of up to 206.83 mS cm^(-1)and excellent alkaline stability(over 95%conductivity is maintained after 1000 h of conditioning in 2 M NaOH at 80℃).In fuel cell performance test,QPMTP-30 achieves a peak power density(PPD)of 974.5 mW cm^(-2)and operates stably at 80℃for more than 60 h(0.1 A cm^(-2)).Incorporating large steric hindrance building blocks and multi-cations into the poly(aryl piperidinium)backbone not only synergizes the development of highperformance AEMs but also opens up new ideas for the structural design of future AEMs.
基金financially supported by the National Natural Science Foundation of China(No.52273205)the Fundamental Research Funds for the Central Universities(No.JZ2024HGTG0297)。
文摘Anion exchange membrane water electrolysis(AEMWE)synergize the kinetic merits of alkaline systems,zero-gap configurations and compatibility with non-noble metal catalysts,offering a promising pathway toward green hydrogen production.Nevertheless,practical exploitation was hindered by critical challenges:inferior alkaline stability,insufficient mechanical integrity,and detrimental hydrogen crossover of anion exchange membranes(AEMs),which compromise both device durability and operational safety.Here,we engineered a porous expanded polytetrafluoroethylene(e-PTFE)-reinforced poly(arylene quinuclidinium)membrane that enhances AEM mechanical robustness,prevents stress-induced rupture,and suppresses hydrogen crossover during electrolyzer operation.Specifically,the reinforced poly(arylene quinuclidinium)membrane(R-PTPQui)exhibited a tensile strength of 56 MPa and an elongation at break of 55%.Moreover,it effectively reduced hydrogen permeation in the electrolyzer,achieving an extremely low H_(2)-to-O_(2)(HTO)value of 0.44 vol%at 0.1 A·cm^(-2).The R-PTPQui-based electrolyzer achieved a high current density of 4.9 A·cm^(-2)at 2.0 V and a Faradaic efficiency of 98.6%using a non-precious anode catalyst.These advances significantly strength the compatibility of poly(arylene quinuclidinium)-based AEMs for industrial-scale green hydrogen generation.
基金Natural Science Foundation of China(grant nos 22075031)Jilin Provincial Science&Technology Department(grant nos 20220201105GX)Jilin Provincial Development and Reform Commission(grant nos 2023C034-4)。
文摘The development of alkaline fuel cells is moving forward at an accelerated pace,and the application of ether-free bonded polymers to anion exchange membranes(AEMs)has been widely investigated.However,the question of the“trade-off”between AEM ionic conductivity and dimensional stability remains difficult.The strategy of inducing microphase separation to improve the performance of AEM has attracted much attention recently,but the design of optimal molecular structures is still being explored.Here,this work introduced different ratios of 3-bromo-1,1,1-trifluoroacetone(x=40,50,and 60)into the main chain of poly(p-terphenylene isatin).Because fluorinated groups have excellent hydrophobicity,hydrophilic hydroxyl-containing side chains are introduced to jointly adjust the formation of phase separation structure.The results show that PTI-PTF_(50)-NOH AEM with the appropriate fluorinated group ratio has the best ionic conductivity and alkali stability under the combined effect of both.It has an ionic conductivity of 133.83 mS cm^(-1)at 80°C.In addition,the OH-conductivity remains at 89%of the initial value at 80°C and 3 M KOH for 1056 h of immersion.The cell polarization curve based on PTI-PTF_(50)-NOH shows a power density of 734.76 mW cm^(-2)at a current density of 1807.7 mA cm^(-2).
基金supported by the National Key R&D Program of China(No.2023YFB4004700)。
文摘Anion exchange membrane fuel cells(AEMFCs)are considered a more affordable technology compared to proton exchange membrane fuel cells(PEMFCs),but the performance and durability of AEMFCs are still not competent with PEMFCs owing to the more challenging water management,which severely hinders its development and real-life applications.In this study,we introduce the strategy to boost the performance and stability of the membrane electrode assembly(MEA)of AEMFCs by regulating the hydrophilicity of the anode and cathode ionomers.Two poly(biphenyl alkylene)ionomers with different hydrophilicity are synthesized and used to fabricate MEAs with asymmetric or symmetric ionomer configurations in the anodic and cathodic catalyst layers(CLs)for AEMFCs.Molecular dynamics(MD)simulations have revealed different diffusion rates of water in the hydrophobic anode and the hydrophilic cathode,which show the potential of this design to improve water management in AEMFCs,The effectiveness of this design is also confirmed by experimental results that the MEA with this asymmetric configuration exhibits the highest power and current densities of 1.58 W cm^(-2)or 5.58 A cm^(-2),respectively,among all configurations.Furthermore,this configuration also enhances the durability,with the MEA showing a voltage decay rate of only 313.1μV h^(-1)after 500 h of in-situ durability test at 0.2 A cm^(-2).This study provides new insights into the rational design of more efficient water management in MEA for high-performance AEMFCs.
文摘Aim To study the exchange reaction characteristics of anion exchange resin for diclofenac sodium. Methods The drug-resin complexes were prepared by a batch method with diclofenac sodium as the model drug and the strong anion exchange resin (201 × 7) as the carrier. The effects of different forms (OH~ - and Cl~ - ) of the strong anion exchange resin, the particle size of the resin, and the reaction temperature on the exchange behavior were described. The exchange kinetic profiles were fitted. The related exc...
基金Project (20080242009) supported by Basic Research Foundation of Beijing Institute of Technology, China
文摘Removal of Cr（VI） from aqueous solution by strong alkaline anion exchange fiber （SAAEF） was achieved using batch adsorption experiments. The effect of contact time, initial Cr（VI） concentration and pH was investigated. The results showed that the maximum adsorption capacity of SAAEF was 187.7 mg/g at pH=1.0. The adsorption capacity increased with Cr（VI） concentration but decreased with pH value when pH〉1.0. Adsorption isotherms at various temperatures were obtained. Langmuir, Freundlich, Dubinin-Radushkevich and Temkin models were adopted and the equilibrium data fitted best with the Langmuir isotherm. The constants of these models indicated that the adsorption process involved both chemisorption and physisorption. The values of thermodynamic parameters, including DH, DG and DS, suggested that the adsorption of Cr（VI） on SAAEF was a spontaneous, entropy-driven and endothermic process. Q（iso） was not a constant value, which indicated an inhomogenous energy distribution on SAAEF.
基金supported by the National Natural Science Foundation of China(No.21177059)the Depart-ment of Science and Technology,Jiangsu Province(No.BK2012017/2011016,BE2012160)
文摘We fabricated and characterized two hybrid adsorbents originated from hydrated ferric oxides （HFOs） using a polymeric anion exchanger D201 and calcite as host. The resultant adsorbents （denoted as HFO-201 and IOCCS） were employed for Sb（V） removal from water. Increasing solution pH from 3 to 9 apparently weakened Sb（V） removal by both composites, while increasing temperature from 293 to 313 K only improved Sb（V） uptake by IOCCS. HFO-201 exhibited much higher capacity for Sb（V） than for IOCCS in the absence of other anions in solution. Increasing ionic strength from 0.01 to 0.1 mol/L NaNO3 would result in a significant drop of the capacity of HFO-201 in the studied pH ranges; however, negligible effect was observed for 1OCCS under similar conditions. Similarly, the competing chloride and sulfate pose more negative effect on Sb（V） adsorption by HFO-201 than by IOCCS, and the presence of silicate greatly decreased their adsorption simultaneously, while calcium ions were found to promote the adsorption of both adsorbents. XPS analysis further demonstrated that preferable Sb（V） adsorption by both hybrids was attributed to the inner sphere complexation of Sb（V） and HFO, and Ca（II） induced adsorption enhancement possibly resulted from the formation of HFO-Ca-Sb complexes. Column adsorption runs proved that Sb（V） in the synthetic water could be effectively removed from 30 μg/L to below 5μg/L （the drinking water standard regulated by China）, and the effective treatable volume of IOCCS was around 6 times as that of HFO-201, implying that HFO coatings onto calcite might be a more effective approach than immobilization inside D201.
基金supported by the Program for Changjiang Scholars and Innovative Research Team in University (Nos.51208249,51290282)Natural Science Foundation of China (Nos.51178215,51308283)+1 种基金the Jiangsu Nature Science Fund,China (Nos.BK2010006,BK2011032)the Joint Innovation Project for Production-Study-Research in Jiangsu Province,China (No.BY2013061)
文摘This study investigated the removal of dissolved organic matter（DOM） from real dyeing bio-treatment effluents（DBEs） with the use of a novel magnetic anion exchange resin（NDMP）.DOMs in two typical DBEs were fractionized using DAX-8/XAD-4 resin and ultrafiltration membranes. The hydrophilic fractions and the low molecular weight（MW）（〈3 kDa） DOM fractions constituted a major portion（〉50%） of DOMs for the two effluents. The hydrophilic and low MW fractions of both effluents were the greatest contributors of specific UV254absorbance（SUVA254）,and the SUVA254 of DOM fractions decreased with hydrophobicity and MW. Two DBEs exhibited acute and chronic biotoxicities. Both acute and chronic toxicities of DOM fractions increased linearly with the increase of SUVA254 value. Kinetics of dissolved organic carbon（DOC） removal via NDMP treatment was performed by comparing it with that of particle active carbon（PAC）. Results indicated that the removal of DOC from DBEs via NDMP was 60%,whereas DOC removals by PAC were lower than 15%. Acidic organics could be significantly removed with the use of NDMP. DOM with large MW in DBE could be removed significantly by using the same means. Removal efficiency of NDMP for DOM decreased with the decrease of MW. Compared with PAC,NDMP could significantly reduce the acute and chronic bio-toxicities of DBEs. NaCl/NaOH mixture regenerants,with selected concentrations of 10% NaCl（m/m）/1%NaOH（m/m）,could improve desorption efficiency.
基金support of the National Natural Science Foundation of China (No. 20574063,21004055)
文摘A fibrous strong base anion exchanger （QAPPS） was prepared for the first time via chloromethylation and quaternary amination reaction of polyphenylene sulfide fiber （PPS）, and its physical-chemical structure and adsorption behavior for Cr（VI） were characterized by FT- IR, Energy Dispersive Spectrometry, TG-DTG, elemental analysis and batch adsorptive technique, respectively. The novel fibrous adsorbent could effectively adsorb Cr（VI） over the pH range 1-12, the maximum adsorption capacity was 166.39 mg/g at pH 3.5, and the adsorption behavior could be described well by Langmuir isotherm equation model. The adsorption kinetics was studied using pseudo first-order and pseudo second-order models, and the 4/2 and equilibrium adsorption time were 5 and 20 min respectively when initial Cr（VI） concentration was 100 mg/L. The saturated fibers could be regenerated rapidly by a mixed solution of 0.5 mol/L NaOH and 0.5 mol/L NaCl, and the adsorption capacity was well maintained after six adsorption-desorption cycles.
基金the "UTE for CIMA project" as well as by a grant from the "Institute de Salud CarlosⅢ" (PI051098). J. M. B. has a grant from the Spanish Ministry of Science and Technology
文摘Primary canalicular bile undergoes a process of fluidization and alkalinization along the biliary tract that is influenced by several factors including hormones, innervation/neuropeptides, and biliary constituents. The excretion of bicarbonate at both the canaliculi and the bile ducts is an important contributor to the generation of the so-called bile-salt independent flow. Bicarbonate is secreted from hepatocytes and cholangiocytes through parallel mechanisms which involve chloride efflux through activation of Cl- channels, and further bicarbonate secretion via AE2/SLC4A2-mediated Cl-/HCO3- exchange. Glucagon and secretin are two relevant hormones which seem to act very similarly in their target cells （hepatocytes for the former and cholangiocytes for the latter）. These hormones interact with their specific G protein-coupled receptors, causing increases in intracellular levels of cAMP and activation of cAMP-dependent Cl- and HCO3- secretory mechanisms. Both hepatocytes and cholangiocytes appear to have cAMP-responsive intracellular vesicles in which AE2/SLC4A2 colocalizes with cell specific Cl- channels （CFTR in cholangiocytes and not yet determined in hepatocytes） and aquaporins （AQP8 in hepatocytes and AQP1 in cholangiocytes）, cAMP-induced coordinated trafficking of these vesicles to either canalicular or cholangiocyte lumenal membranes and further exocytosis results in increased osmotic forces and passive movement of water with net bicarbonate-rich hydrocholeresis.
基金supported by the National Key Research and Development Program(2022YFB4202200)the Fundamental Research Funds for the Central Universities and sponsored by Shanghai Pujiang Program(22PJ1413100)。
文摘Green hydrogen produced by water electrolysis combined with renewable energy is a promising alternative to fossil fuels due to its high energy density with zero-carbon emissions.Among water electrolysis technologies,the anion exchange membrane(AEM) water electrolysis has gained intensive attention and is considered as the next-generation emerging technology due to its potential advantages,such as the use of low-cost non-noble metal catalysts,the relatively mature stack assembly process,etc.However,the AEM water electrolyzer is still in the early development stage of the kW-level stack,which is mainly attributed to severe performance decay caused by the core component,i.e.,AEM.Here,the review comprehensively presents the recent progress of advanced AEM from the view of the performance of water electrolysis cells.Herein,fundamental principles and critical components of AEM water electrolyzers are introduced,and work conditions of AEM water electrolyzers and AEM performance improvement strategies are discussed.The challenges and perspectives are also analyzed.
基金acknowledge generous suppoa provided by Program for Changjiang Scholars Innovative Research Team in UniversityNSFC(Nos50938004,50825802 and 51178215)+1 种基金Jiangsu Natural Science Fund(Nos BK2010006 and BK201 1032)P.R. Chinathe Scientific Research Starting Fund for Postdoctors,Nanjing University(No0211003046)
文摘An anion exchange resin NDP-5 has been prepared successfully and applied on the selective removal of nitrate from SO_4^（2-）/ NO_3^- binary co-existence system.The composition and morphology of NDP-5 were confirmed by FT-IR and SEM.The NDP-5 resin exhibits the completely different behavior on the adsorption capacity,adsorption kinetic and the effect of the completing anion in the absence or presence of sulfate,compared to D213.And,the resultants of kinetic are well fitted by the pseudo-first-order and pseudo-second-order models.These results are very important to develop novel resins with great features.
基金Project supported by the Potash and Phosphate Institute of Canada (PPIC).
文摘A growth chamber study was conducted to determine the relationships between the supply of soil available nitrogen (N) and sulfur (S) and canola (Brassica napus) and wheat (Triticum aestivum L. 'Biggar') N and S uptake and yield in three Western Canadian soils. The suitability of one-hour burial with an anion exchange membrane (AEM) was assessed for its utility as a quick test of the available N:S balance in the soil. Canola and wheat were grown on a Luvisolic soil low in available S and on Brown and Black Chernozemic soils low in both available N and S, with different rates and combinations of N and S fertilizers applied. AEM burial was used to assess soil available nitrate and sulfate supply rates after fertilization. Dry matter yield and N and S concentrations in plant tissues were determined after 6 weeks of growth. The soil available N:S ratio determined by AEM burial closely reflected the relative supplies of available N and S as revealed in the N:S ratios of plant tissue dry matter. The highest yields were achieved where the available N:S ratio in soil and plant tissue ranged from 5 to 13. Thus, a one-hour burial of an AEM probe in the field may be a useful tool to quickly test if a balanced N and S supply is present in the soil for optimum crop yield.
基金supported by the Department of Science and Technology of Fujian Province,China,under theproject No. 2002H009
文摘An improved method,suitable for collecting nitrate from surface waters in the watershed for 15 N isotope tracing analysis,was developed on the basis of the anion exchange coupled with diffusion through systematic simulation and comparison experiments.The results showed that the nitrate could be separated and enriched from the waters efficiently by using the improved method.Being simple and practical in operation principle and procedures,cost-economic,and highly efficient in nitrate separation/enrichment,the method met the requirements of δ 15 N mass spectrum analysis and would lay a foundation for the application of 15 N isotope tracing approach to the research on non-point source pollution in watershed.
