The previous studies of time delay compensation in flight control systems are all based on the conventional aerodynamic derivative model and conducted in longitudinal motions at low angles of attack.In this investigat...The previous studies of time delay compensation in flight control systems are all based on the conventional aerodynamic derivative model and conducted in longitudinal motions at low angles of attack.In this investigation,the effects of time delay on the lateral-directional stability augmentation system in high-a regime are discussed based on theβmodel,which is proposed in our previous work and proved as a more accurate aerodynamic model to reveal the lateraldirectional unsteady aerodynamic characteristics at high angles of attack.Both theβmodel and the quasi-steady model are used for simulating the effects of time delay on the flying qualities in high-a maneuvers.The comparison between the simulation results shows that the flying qualities are much more sensitive to the mismatch of feedback gains than the state errors caused by time delay.Then a typical adaptive controller based on the conventional dynamic derivative model and a gain-prediction compensator based onβmodel are designed to address the time delay in different maneuvers.The simulation results show that the gain-prediction compensator is much simpler and more efficient at high angles of attack.Finally,the gain-prediction compensator is combined with a linearizedβmodel reference adaptive controller to compensate the adverse effects of very large time delay,which exhibits excellent performance when addressing the extreme conditions at high angles of attack.展开更多
The studies of asymmetric vortices flow over slender body and its active control at high angles of attack have significant importance for both academic field and engineering area.This paper attempts to provide an upda...The studies of asymmetric vortices flow over slender body and its active control at high angles of attack have significant importance for both academic field and engineering area.This paper attempts to provide an update state of art to the investigations on the fields of forebody asymmetric vortices.This review emphasizes the correlation between micro-perturbation on the model nose and its response and evolution behaviors of the asymmetric vortices.The critical issues are discussed, which include the formation and evolution mechanism of asymmetric multi-vortices;main behaviors of asymmetric vortices flow including its deterministic feature and vortices flow structure;the evolution and development of asymmetric vortices under the perturbation on the model nose;forebody vortex active control especially discussed micro-perturbation active control concept and technique in more detail.However present understanding in this area is still very limited and this paper tries to identify the key unknown problems in the concluding remarks.展开更多
The wind tunnel experiments is conducted to get inspiration for understanding the mechanism of the asymmetric flow pattern and developing an innovative flow control technique for a slender body at high angle of attack...The wind tunnel experiments is conducted to get inspiration for understanding the mechanism of the asymmetric flow pattern and developing an innovative flow control technique for a slender body at high angle of attack. The bi-stable situation of the side forces is observed, which could be easily switched by a tiny disturbances either from coming flow or from artificial disturbances at nose tip （including manufacturing defect）. In turbulent flows the side forces switched randomly between positive and negative. There exists a hysteresis loop of side force with the rolling angle. A rod in front of the slender body is used to change the vortex pattern, which could be kept even the rod is moved out from the stream. A miniature strake attached to the nose tip of the model can be moved to different circumferential position. When the strake is stationary, the hysteresis loop disappears and the side force does not change with the turbulent fluctuation of coming flow. The results from dynamic measurements of section side force indicates that when the strake swung at lower frequency the side force can follow the cadence of the swinging strake. With increasing frequency, the magnitude of the side force decreases. At still high frequency, the side force diminishes to zero. If the strake is swinging, while the middle position can be changed to different circumferential angle Фs on either left or right side, the side forces can be changed proportionally with the angle Фs. On the basis of the experimental results, the mechanism of the asymmetry is discussed.展开更多
In this paper, fast setpoint altitude tracking control for Hypersonic Flight Vehicle(HFV)satisfying Angle of Attack(AOA) constraint is studied with a two-loop structure controller, in the presence of parameter uncerta...In this paper, fast setpoint altitude tracking control for Hypersonic Flight Vehicle(HFV)satisfying Angle of Attack(AOA) constraint is studied with a two-loop structure controller, in the presence of parameter uncertainties and disturbances. For the outer loop, phase plane design is adopted for the simplified model under Bang-Bang controller to generate AOA command guaranteeing fast tracking performance. Modifications based on Feedback-Linearization(FL) technique are adopted to transform the phase trajectory into a sliding curve. Moreover, to resist mismatch between design model and actual model, Fast Exponential Reaching Law(FERL) is augmented with the baseline controller to maintain state on the sliding curve. The inner-loop controller is based on backstepping technique to track the AOA command generated by outer-loop controller. Barrier Lyapunov Function(BLF) design is employed to satisfy AOA requirement. Moreover, a novel auxiliary state is introduced to remove the restriction of BLF design on initial tracking errors. Dynamic Surface Control(DSC) is utilized to ease the computation burden. Rigorous stability proof is then given, and AOA is guaranteed to stay in predefined region theoretically. Simulations are conducted to verify the efficiency and superior performance of the proposed method.展开更多
The control problem for under-actuated reentry vehicle like HTV-2 is considered with small angle of attack.The control strategy for an aircraft with positive lateral control departure parameter relies on strong latera...The control problem for under-actuated reentry vehicle like HTV-2 is considered with small angle of attack.The control strategy for an aircraft with positive lateral control departure parameter relies on strong lateral stability,which declines with the decrease of the angle of attack.Thus,to control the lateral-directional motion in a stable state is hard and even impossible in some scenarios where the under-actuated reentry vehicle,like HTV-2,flies in a low angle of attack.To address this problem,the lateral-directional open-loop motion characteristics are analyzed.The results show that in an uncontrolled state,the lateral-directional motion can automatically converge to stabilization thanks to the aerodynamic damping effect.Therefore,a method of turning-off the lateral-directional control and inviting aerodynamic damping to control can achieve stability.The six-degree-of-freedom simulation show that the lateral-directional motion can be stabilized by the aerodynamic damping,and the lateral position error caused by the bank angle deviation is limited near the zero-rise angle of attack.The control strategy is effective.展开更多
A formal analysis to footprint problem with effects of angle of attack （AOA） is presented. First a flexible and rapid standardized method for footprint generation is developed. Zero bank angle control strategy and t...A formal analysis to footprint problem with effects of angle of attack （AOA） is presented. First a flexible and rapid standardized method for footprint generation is developed. Zero bank angle control strategy and the maximum crossrange method are used to obtain virtual target set; afterward, closed-loop bank angle guidance law is used to find footprint by solving closest approach problem for each element in virtual target set. Then based on quasi-equilibrium glide condition, the typical inequality reentry trajectory constraints are converted to angle of attack lower boundary constraint. Constrained by the lower boundary, an original and practical angle of attack parametric method is proposed. By using parametric angle of attack profile, optimization algorithm for angle of attack is designed and the impact of angle of attack to footprint is discussed. Simulations with different angle of attack profiles are presented to demonstrate the performance of the proposed footprint solution method and validity of optimal algorithm.展开更多
In order to enhance the accuracy of Air Traffic Control(ATC)cybersecurity attack detection,in this paper,a new clustering detection method is designed for air traffic control network security attacks.The feature set f...In order to enhance the accuracy of Air Traffic Control(ATC)cybersecurity attack detection,in this paper,a new clustering detection method is designed for air traffic control network security attacks.The feature set for ATC cybersecurity attacks is constructed by setting the feature states,adding recursive features,and determining the feature criticality.The expected information gain and entropy of the feature data are computed to determine the information gain of the feature data and reduce the interference of similar feature data.An autoencoder is introduced into the AI(artificial intelligence)algorithm to encode and decode the characteristics of ATC network security attack behavior to reduce the dimensionality of the ATC network security attack behavior data.Based on the above processing,an unsupervised learning algorithm for clustering detection of ATC network security attacks is designed.First,determine the distance between the clustering clusters of ATC network security attack behavior characteristics,calculate the clustering threshold,and construct the initial clustering center.Then,the new average value of all feature objects in each cluster is recalculated as the new cluster center.Second,it traverses all objects in a cluster of ATC network security attack behavior feature data.Finally,the cluster detection of ATC network security attack behavior is completed by the computation of objective functions.The experiment took three groups of experimental attack behavior data sets as the test object,and took the detection rate,false detection rate and recall rate as the test indicators,and selected three similar methods for comparative test.The experimental results show that the detection rate of this method is about 98%,the false positive rate is below 1%,and the recall rate is above 97%.Research shows that this method can improve the detection performance of security attacks in air traffic control network.展开更多
To counter BTT guidance mode, new relative motion equations of the targetaircraft and the attack aircraft are proposed. The inverse system theory of the nonlinearcontrol is used, and the direct BTT-180 guidance comman...To counter BTT guidance mode, new relative motion equations of the targetaircraft and the attack aircraft are proposed. The inverse system theory of the nonlinearcontrol is used, and the direct BTT-180 guidance command is solved, which can operatethe attack aircraft to automatically complete the flight mission of the preceding stage ofthe terminal weapon delivery, and thus the automatic attack is extended from the stage ofthe terminal weapon delivery to the preceding stage of the terminal weapon delivery.展开更多
Aiming at the high angle of attack pull-up and multi-channel roll pull-up coupling problems of high maneuvering aircraft, this paper establishes the flight attitude control rate by means of unsteady flow numerical sol...Aiming at the high angle of attack pull-up and multi-channel roll pull-up coupling problems of high maneuvering aircraft, this paper establishes the flight attitude control rate by means of unsteady flow numerical solution, dynamic unstructured nested mesh assembly method and numerical solution method of flight mechanics equation. On this basis, a virtual flight simulation platform integrating pneumatics, motion and control is established. Based on this virtual flight simulation platform, F-16 aircraft is simulated by high angle of attack pull-up flight mode and multi-channel roll pull-up coupling flight mode. Finally, the influence of rudder on the yaw control channel is investigated. The results show that the numerical virtual flight simulation platform established in this paper has the ability to simulate maneuvering flight of aircraft.展开更多
In this paper, a practical decoupling control scheme for fighter aircraft is proposed to achieve high angle of attack(AOA)tracking and super maneuver action by utilizing the thrust vector technology. Firstly, a six de...In this paper, a practical decoupling control scheme for fighter aircraft is proposed to achieve high angle of attack(AOA)tracking and super maneuver action by utilizing the thrust vector technology. Firstly, a six degree-of-freedom(DOF) nonlinear model with 12 variables is given. Due to low sufficiency of the aerodynamic actuators at high AOA, a thrust vector model with rotatable engine nozzles is derived. Secondly, the active disturbance rejection control(ADRC) is used to realize a three-channel decoupling control such that a strong coupling between different channels can be treated as total disturbance, which is estimated by the designed extended state observer. The control surface allocation is implemented by the traditional daisy chain method. Finally,the effectiveness of the presented control strategy is demonstrated by some numerical simulation results.展开更多
Based on the determinability of asymmetric vortices flow over slender body under changeless round grain at high angle of attack,the effect of microblowing set in special position on the behaviors of asymmetric flow is...Based on the determinability of asymmetric vortices flow over slender body under changeless round grain at high angle of attack,the effect of microblowing set in special position on the behaviors of asymmetric flow is discussed in this paper,including blowing momentum and circumferential locations of the microblowing hole of 0.5 mm in diameter on nose tip.A new kind of active control technique,named perturbation-combined active control technique,which combines the micro-grain and micro-blowing perturbation,was proposed on the basis of the above.This control technique can not only change the sign of side force of slender body arbitrarily through changing the vortices positions between yaw-left and yaw-right configuration,but also can make the magnitude of side force variable gradually even at bistable state of asymmetric vortex.Finally,the interferential mechanism of the perturbation-combined active control technique has also been concluded from this paper.The tests have been conducted at low speed wind tunnel with subcritical Reynolds number of 1.05×10~5 at angle of attack α=50° in Beihang University,Beijing,China.展开更多
Strong asymmetrical vortices appear on the leeward of slender body at high angles of attack, which has very unfavorable effect on the stability and control of the aircraft. A method is developed to control the side fo...Strong asymmetrical vortices appear on the leeward of slender body at high angles of attack, which has very unfavorable effect on the stability and control of the aircraft. A method is developed to control the side force of slender body at high angles of attack, and is verified in wind tunnel. A thin-film triangular self-excited oscillation flag is fixed at the tip of the slender body model whose semi-apex angle is 10°. Side force is approximately linearly proportional to roll-setting angle of self-excited oscillation flag at high angles of attack, and the slop of fitting straight line obtained by the least square method is -0.158. The linear relationship between side force and roU-setting angle provides convenience for developing side force control law of slender body at high angles of attack. Experimental data shows that the side force coefficients vary linearly with roll-setting angles when a specific plastic self-excited oscillation flag is used as the control flag. The range of side force coefficient and roll-setting angle are, respectively, -3.2 to 3.0 and -20° to 20°. The device is simple, effective, and is of great potential in engineering application.展开更多
A big step forward to improve power system monitoring and performance, continued load growth without a corresponding increase in transmission resources has resulted in reduced operational margins for many power system...A big step forward to improve power system monitoring and performance, continued load growth without a corresponding increase in transmission resources has resulted in reduced operational margins for many power systems worldwide and has led to operation of power systems closer to their stability limits and to power exchange in new patterns. These issues, as well as the on-going worldwide trend towards deregulation of the entire industry on the one hand and the increased need for accurate and better network monitoring on the other hand, force power utilities exposed to this pressure to demand new solutions for wide area monitoring, protection and control. Wide-area monitoring, protection, and control require communicating the specific-node information to a remote station but all information should be time synchronized so that to neutralize the time difference between information. It gives a complete simultaneous snap shot of the power system. The conventional system is not able to satisfy the time-synchronized requirement of power system. Phasor Measurement Unit (PMU) is enabler of time-synchronized measurement, it communicate the synchronized local information to remote station.展开更多
The patterns of wing rock motion at 52.5° angle of attack have already been investigated in detail （Rong, 2009; Wang, 2010）. These patterns are completely different from those at other angles of attack. This ph...The patterns of wing rock motion at 52.5° angle of attack have already been investigated in detail （Rong, 2009; Wang, 2010）. These patterns are completely different from those at other angles of attack. This phenomenon indicates that angle of attack affects wing rock motion. The present study alms to examine the different patterns of wing rock motion at different angles of attack. The flow mechanisms of the motion patterns are also revealed, especially the uncommanded lateral motions, including wing rock and lateral deflection, induced by regular asymmetric separated flow from wings at low angles of attack and fore- body asymmetric vortices at angles of attack of 27.5°〈 α 〈 70°. The test conditions, including the testing Reynolds number, wind tunnel, experimental techniques, and test model, are all the same as those used in a previous study at a = 52.5°. Finally, the experimental technique of rotating nose of the model to suppress the wing rock or lateral deflection, which is induced by forebody asymmetric vortex flow, is applied. The uncommanded lateral motions are successfully suppressed by this technique.展开更多
基金the National Natural Science Foundation of China(No.11872209)。
文摘The previous studies of time delay compensation in flight control systems are all based on the conventional aerodynamic derivative model and conducted in longitudinal motions at low angles of attack.In this investigation,the effects of time delay on the lateral-directional stability augmentation system in high-a regime are discussed based on theβmodel,which is proposed in our previous work and proved as a more accurate aerodynamic model to reveal the lateraldirectional unsteady aerodynamic characteristics at high angles of attack.Both theβmodel and the quasi-steady model are used for simulating the effects of time delay on the flying qualities in high-a maneuvers.The comparison between the simulation results shows that the flying qualities are much more sensitive to the mismatch of feedback gains than the state errors caused by time delay.Then a typical adaptive controller based on the conventional dynamic derivative model and a gain-prediction compensator based onβmodel are designed to address the time delay in different maneuvers.The simulation results show that the gain-prediction compensator is much simpler and more efficient at high angles of attack.Finally,the gain-prediction compensator is combined with a linearizedβmodel reference adaptive controller to compensate the adverse effects of very large time delay,which exhibits excellent performance when addressing the extreme conditions at high angles of attack.
基金The project supported by the National Natural Science Foundation of China(10172017)Aeronautical Science Foundation of China(02A51048)Foundation of National Key Laboratory of Aerodynamic Design and Research(51462020504HK0101)
文摘The studies of asymmetric vortices flow over slender body and its active control at high angles of attack have significant importance for both academic field and engineering area.This paper attempts to provide an update state of art to the investigations on the fields of forebody asymmetric vortices.This review emphasizes the correlation between micro-perturbation on the model nose and its response and evolution behaviors of the asymmetric vortices.The critical issues are discussed, which include the formation and evolution mechanism of asymmetric multi-vortices;main behaviors of asymmetric vortices flow including its deterministic feature and vortices flow structure;the evolution and development of asymmetric vortices under the perturbation on the model nose;forebody vortex active control especially discussed micro-perturbation active control concept and technique in more detail.However present understanding in this area is still very limited and this paper tries to identify the key unknown problems in the concluding remarks.
文摘The wind tunnel experiments is conducted to get inspiration for understanding the mechanism of the asymmetric flow pattern and developing an innovative flow control technique for a slender body at high angle of attack. The bi-stable situation of the side forces is observed, which could be easily switched by a tiny disturbances either from coming flow or from artificial disturbances at nose tip （including manufacturing defect）. In turbulent flows the side forces switched randomly between positive and negative. There exists a hysteresis loop of side force with the rolling angle. A rod in front of the slender body is used to change the vortex pattern, which could be kept even the rod is moved out from the stream. A miniature strake attached to the nose tip of the model can be moved to different circumferential position. When the strake is stationary, the hysteresis loop disappears and the side force does not change with the turbulent fluctuation of coming flow. The results from dynamic measurements of section side force indicates that when the strake swung at lower frequency the side force can follow the cadence of the swinging strake. With increasing frequency, the magnitude of the side force decreases. At still high frequency, the side force diminishes to zero. If the strake is swinging, while the middle position can be changed to different circumferential angle Фs on either left or right side, the side forces can be changed proportionally with the angle Фs. On the basis of the experimental results, the mechanism of the asymmetry is discussed.
基金supported by the National Natural Science Foundation of China (Nos. 61833016, 61873295, 61622308and 61933010)。
文摘In this paper, fast setpoint altitude tracking control for Hypersonic Flight Vehicle(HFV)satisfying Angle of Attack(AOA) constraint is studied with a two-loop structure controller, in the presence of parameter uncertainties and disturbances. For the outer loop, phase plane design is adopted for the simplified model under Bang-Bang controller to generate AOA command guaranteeing fast tracking performance. Modifications based on Feedback-Linearization(FL) technique are adopted to transform the phase trajectory into a sliding curve. Moreover, to resist mismatch between design model and actual model, Fast Exponential Reaching Law(FERL) is augmented with the baseline controller to maintain state on the sliding curve. The inner-loop controller is based on backstepping technique to track the AOA command generated by outer-loop controller. Barrier Lyapunov Function(BLF) design is employed to satisfy AOA requirement. Moreover, a novel auxiliary state is introduced to remove the restriction of BLF design on initial tracking errors. Dynamic Surface Control(DSC) is utilized to ease the computation burden. Rigorous stability proof is then given, and AOA is guaranteed to stay in predefined region theoretically. Simulations are conducted to verify the efficiency and superior performance of the proposed method.
文摘The control problem for under-actuated reentry vehicle like HTV-2 is considered with small angle of attack.The control strategy for an aircraft with positive lateral control departure parameter relies on strong lateral stability,which declines with the decrease of the angle of attack.Thus,to control the lateral-directional motion in a stable state is hard and even impossible in some scenarios where the under-actuated reentry vehicle,like HTV-2,flies in a low angle of attack.To address this problem,the lateral-directional open-loop motion characteristics are analyzed.The results show that in an uncontrolled state,the lateral-directional motion can automatically converge to stabilization thanks to the aerodynamic damping effect.Therefore,a method of turning-off the lateral-directional control and inviting aerodynamic damping to control can achieve stability.The six-degree-of-freedom simulation show that the lateral-directional motion can be stabilized by the aerodynamic damping,and the lateral position error caused by the bank angle deviation is limited near the zero-rise angle of attack.The control strategy is effective.
基金National Natural Science Foundation of China (61174221)
文摘A formal analysis to footprint problem with effects of angle of attack （AOA） is presented. First a flexible and rapid standardized method for footprint generation is developed. Zero bank angle control strategy and the maximum crossrange method are used to obtain virtual target set; afterward, closed-loop bank angle guidance law is used to find footprint by solving closest approach problem for each element in virtual target set. Then based on quasi-equilibrium glide condition, the typical inequality reentry trajectory constraints are converted to angle of attack lower boundary constraint. Constrained by the lower boundary, an original and practical angle of attack parametric method is proposed. By using parametric angle of attack profile, optimization algorithm for angle of attack is designed and the impact of angle of attack to footprint is discussed. Simulations with different angle of attack profiles are presented to demonstrate the performance of the proposed footprint solution method and validity of optimal algorithm.
基金National Natural Science Foundation of China(U2133208,U20A20161)National Natural Science Foundation of China(No.62273244)Sichuan Science and Technology Program(No.2022YFG0180).
文摘In order to enhance the accuracy of Air Traffic Control(ATC)cybersecurity attack detection,in this paper,a new clustering detection method is designed for air traffic control network security attacks.The feature set for ATC cybersecurity attacks is constructed by setting the feature states,adding recursive features,and determining the feature criticality.The expected information gain and entropy of the feature data are computed to determine the information gain of the feature data and reduce the interference of similar feature data.An autoencoder is introduced into the AI(artificial intelligence)algorithm to encode and decode the characteristics of ATC network security attack behavior to reduce the dimensionality of the ATC network security attack behavior data.Based on the above processing,an unsupervised learning algorithm for clustering detection of ATC network security attacks is designed.First,determine the distance between the clustering clusters of ATC network security attack behavior characteristics,calculate the clustering threshold,and construct the initial clustering center.Then,the new average value of all feature objects in each cluster is recalculated as the new cluster center.Second,it traverses all objects in a cluster of ATC network security attack behavior feature data.Finally,the cluster detection of ATC network security attack behavior is completed by the computation of objective functions.The experiment took three groups of experimental attack behavior data sets as the test object,and took the detection rate,false detection rate and recall rate as the test indicators,and selected three similar methods for comparative test.The experimental results show that the detection rate of this method is about 98%,the false positive rate is below 1%,and the recall rate is above 97%.Research shows that this method can improve the detection performance of security attacks in air traffic control network.
文摘To counter BTT guidance mode, new relative motion equations of the targetaircraft and the attack aircraft are proposed. The inverse system theory of the nonlinearcontrol is used, and the direct BTT-180 guidance command is solved, which can operatethe attack aircraft to automatically complete the flight mission of the preceding stage ofthe terminal weapon delivery, and thus the automatic attack is extended from the stage ofthe terminal weapon delivery to the preceding stage of the terminal weapon delivery.
文摘Aiming at the high angle of attack pull-up and multi-channel roll pull-up coupling problems of high maneuvering aircraft, this paper establishes the flight attitude control rate by means of unsteady flow numerical solution, dynamic unstructured nested mesh assembly method and numerical solution method of flight mechanics equation. On this basis, a virtual flight simulation platform integrating pneumatics, motion and control is established. Based on this virtual flight simulation platform, F-16 aircraft is simulated by high angle of attack pull-up flight mode and multi-channel roll pull-up coupling flight mode. Finally, the influence of rudder on the yaw control channel is investigated. The results show that the numerical virtual flight simulation platform established in this paper has the ability to simulate maneuvering flight of aircraft.
基金supported by the National Natural Science Foundation of China(61973175,61973172)。
文摘In this paper, a practical decoupling control scheme for fighter aircraft is proposed to achieve high angle of attack(AOA)tracking and super maneuver action by utilizing the thrust vector technology. Firstly, a six degree-of-freedom(DOF) nonlinear model with 12 variables is given. Due to low sufficiency of the aerodynamic actuators at high AOA, a thrust vector model with rotatable engine nozzles is derived. Secondly, the active disturbance rejection control(ADRC) is used to realize a three-channel decoupling control such that a strong coupling between different channels can be treated as total disturbance, which is estimated by the designed extended state observer. The control surface allocation is implemented by the traditional daisy chain method. Finally,the effectiveness of the presented control strategy is demonstrated by some numerical simulation results.
基金supported by the National Natural Science Foundation of China (Grant No. 10872019)Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20101102110015),NCET-06-0176
文摘Based on the determinability of asymmetric vortices flow over slender body under changeless round grain at high angle of attack,the effect of microblowing set in special position on the behaviors of asymmetric flow is discussed in this paper,including blowing momentum and circumferential locations of the microblowing hole of 0.5 mm in diameter on nose tip.A new kind of active control technique,named perturbation-combined active control technique,which combines the micro-grain and micro-blowing perturbation,was proposed on the basis of the above.This control technique can not only change the sign of side force of slender body arbitrarily through changing the vortices positions between yaw-left and yaw-right configuration,but also can make the magnitude of side force variable gradually even at bistable state of asymmetric vortex.Finally,the interferential mechanism of the perturbation-combined active control technique has also been concluded from this paper.The tests have been conducted at low speed wind tunnel with subcritical Reynolds number of 1.05×10~5 at angle of attack α=50° in Beihang University,Beijing,China.
基金supported by the ‘‘National Natural Science Foundation-Outstanding Youth Foundation’’
文摘Strong asymmetrical vortices appear on the leeward of slender body at high angles of attack, which has very unfavorable effect on the stability and control of the aircraft. A method is developed to control the side force of slender body at high angles of attack, and is verified in wind tunnel. A thin-film triangular self-excited oscillation flag is fixed at the tip of the slender body model whose semi-apex angle is 10°. Side force is approximately linearly proportional to roll-setting angle of self-excited oscillation flag at high angles of attack, and the slop of fitting straight line obtained by the least square method is -0.158. The linear relationship between side force and roU-setting angle provides convenience for developing side force control law of slender body at high angles of attack. Experimental data shows that the side force coefficients vary linearly with roll-setting angles when a specific plastic self-excited oscillation flag is used as the control flag. The range of side force coefficient and roll-setting angle are, respectively, -3.2 to 3.0 and -20° to 20°. The device is simple, effective, and is of great potential in engineering application.
文摘A big step forward to improve power system monitoring and performance, continued load growth without a corresponding increase in transmission resources has resulted in reduced operational margins for many power systems worldwide and has led to operation of power systems closer to their stability limits and to power exchange in new patterns. These issues, as well as the on-going worldwide trend towards deregulation of the entire industry on the one hand and the increased need for accurate and better network monitoring on the other hand, force power utilities exposed to this pressure to demand new solutions for wide area monitoring, protection and control. Wide-area monitoring, protection, and control require communicating the specific-node information to a remote station but all information should be time synchronized so that to neutralize the time difference between information. It gives a complete simultaneous snap shot of the power system. The conventional system is not able to satisfy the time-synchronized requirement of power system. Phasor Measurement Unit (PMU) is enabler of time-synchronized measurement, it communicate the synchronized local information to remote station.
基金supported by the National Natural Science Foundation of China(Grant Nos.11172030 and 11102012)
文摘The patterns of wing rock motion at 52.5° angle of attack have already been investigated in detail （Rong, 2009; Wang, 2010）. These patterns are completely different from those at other angles of attack. This phenomenon indicates that angle of attack affects wing rock motion. The present study alms to examine the different patterns of wing rock motion at different angles of attack. The flow mechanisms of the motion patterns are also revealed, especially the uncommanded lateral motions, including wing rock and lateral deflection, induced by regular asymmetric separated flow from wings at low angles of attack and fore- body asymmetric vortices at angles of attack of 27.5°〈 α 〈 70°. The test conditions, including the testing Reynolds number, wind tunnel, experimental techniques, and test model, are all the same as those used in a previous study at a = 52.5°. Finally, the experimental technique of rotating nose of the model to suppress the wing rock or lateral deflection, which is induced by forebody asymmetric vortex flow, is applied. The uncommanded lateral motions are successfully suppressed by this technique.
