Frequent extreme heat events around the world not only pose a major threat to human health but also cause significant economic losses to the livestock industry.The existing management practices are insufficient to ful...Frequent extreme heat events around the world not only pose a major threat to human health but also cause significant economic losses to the livestock industry.The existing management practices are insufficient to fully prevent heat stress with an urgent need to develop preventive medicines.The aim of this study was to develop an antiheat stress Chinese herbal formula(CHF)via big data analysis techniques and to evaluate its anti-heat stress effect and mechanism of action via pharmacodynamic evaluation and network pharmacology analysis.Many anti-heat stress CHFs were collected from the Chinese National Knowledge Infrastructure(CNKI)database.Three alternative CHFs were obtained via unsupervised entropy hierarchical clustering analysis,and the most effective CHF against heat stress,Shidi Jieshu decoction(SJD),was obtained by screening in a mouse heat stress model.In dry and hot environments,SJD significantly improved the heat tolerance of AA broilers by 4-6℃.In a humid and hot environment,pretreatment with 2%SJD resulted in 100%survival of Wenchang chickens at high temperatures.The main active ingredients of SJD were identified as muntjacoside E,timosaponin C,macrostemonoside H and mangiferin via ultraperformance liquid chromatography/mass spectrometry(UPLC/MS)and database comparison.The active ingredients of SJD were found to target tumor necrosis factor-α(TNF-α),signal transducer activator of transcription 3(STAT3)and epidermal growth factor receptor(EGFR).Finally,the safety of the new formulation was assessed in an acute oral toxicity study in rats.The SJDs developed in this study provide a new option for the prevention of heat stress in animal husbandry and offer new insights for further research on anti-heat stress.展开更多
In order to realize the automatic monitoring of ruminant activities of cows,an automatic detection method for the mouth area of ruminant cows based on machine vision technology was studied.Optical flow was used to cal...In order to realize the automatic monitoring of ruminant activities of cows,an automatic detection method for the mouth area of ruminant cows based on machine vision technology was studied.Optical flow was used to calculate the relative motion speed of each pixel in the video frame images.The candidate mouth region with large motion ranges was extracted,and a series of processing methods,such as grayscale processing,threshold segmentation,pixel point expansion and adjacent region merging,were carried out to extract the real area of cows’mouth.To verify the accuracy of the proposed method,six videos with a total length of 96 min were selected for this research.The results showed that the highest accuracy was 87.80%,the average accuracy was 76.46%and the average running time of the algorithm was 6.39 s.All the results showed that this method can be used to detect the mouth area automatically,which lays the foundation for automatic monitoring of cows’ruminant behavior.展开更多
In order to forecast promising technologies in the field of next generation mobile communication, various patent indicators were analyzed such as citation per patent, patent family information, patent share, increase ...In order to forecast promising technologies in the field of next generation mobile communication, various patent indicators were analyzed such as citation per patent, patent family information, patent share, increase rate, and patent activity. These indicators were quantified into several indexes and then integrated into an evaluation score to provide promising technologies. As a result of the suggested patent analysis, four technologies out of twenty two in details classification were selected, which showed outstanding technology competitiveness, high patent share and increasing rates as well as high recent-patent-ratios and triad-patent-family-ratios. Each of the selected technologies scored more than 10 points in total, and the following four technologies were suggested as promising ones in the field of next generation mobile communication: 1) 3GPP based mobile communication, 2) beyond 4G mobile communication, 3) IEEE 802.16 based mobile communication, which are in medium classification of broadband mobile communication system, and 4) testing/certification system of mobile communication, which is in medium classification of mobile communication testing/certification system.展开更多
Oviductus Ranae is the dried oviduct of female Rana tem-poraria chensinensis （David）, distributed mainly in North- eastern China. Oviductus Ranae is one of the best-known and highly valued oriental foods and medicin...Oviductus Ranae is the dried oviduct of female Rana tem-poraria chensinensis （David）, distributed mainly in North- eastern China. Oviductus Ranae is one of the best-known and highly valued oriental foods and medicines. Traditional Chinese medicine holds that Oviductus Ranae can nourish yin, moisten lung and replenish the kidney essence. Meanwhile, activities of Oviductus Ranae such as anti-aging, anti-lipemic, anti-oxidation and anti-fatigue have also been demonstrated by modern phar-macological studies. Previous studies have shown that Oviductus Ranae is mainly composed of proteins, which are up to 50% or more.展开更多
1 GSM-WLL Technology1.1 GSM-WLL System ArchitectureAWLL (Wireless Local Loop)is a radioaccess system for users to access PSTN(Public Switched Telephone Network).It isa substitute for conventional wiredaccess.The GSM-W...1 GSM-WLL Technology1.1 GSM-WLL System ArchitectureAWLL (Wireless Local Loop)is a radioaccess system for users to access PSTN(Public Switched Telephone Network).It isa substitute for conventional wiredaccess.The GSM-WLL system makes use ofGSM technologies to achieve WLL.As shown in Figure 1,a GSM-WLL system展开更多
Under the background of increasingly scarce ore worldwide and increasingly fierce market competition,developing the mining industry could be strongly restricted.Intelligent ore sorting equipment not only improves ore ...Under the background of increasingly scarce ore worldwide and increasingly fierce market competition,developing the mining industry could be strongly restricted.Intelligent ore sorting equipment not only improves ore use and enhances the economic benefits of enterprises but also increases the ore grade and lessens the grinding cost and tailings production.However,long-term research on intelligent ore sorting equipment found that the factors affecting sorting efficiency mainly include ore information identification technology,equipment sorting actuator,and information processing algorithm.The high precision,strong anti-interference capability,and high speed of these factors guarantee the separation efficiency of intelligent ore sorting equipment.Color ore sorter,X-ray ore transmission sorter,dual-energy X-ray transmission ore sorter,X-ray fluorescence ore sorter,and near-infrared ore sorter have been successfully developed in accordance with the different characteristics of minerals while ensuring the accuracy of equipment sorting and improving the equipment sorting efficiency.With the continuous improvement of mine automation level,the application of online element rapid analysis technology with high speed,high precision,and strong anti-interference capability in intelligent ore sorting equipment will become an inevitable trend of equipment development in the future.Laser-induced breakdown spectroscopy,transientγneutron activation analysis,online Fourier transform infrared spectroscopy,and nuclear magnetic resonance techniques will promote the development of ore sorting equipment.In addition,the improvement and joint application of additional high-speed and high-precision operation algorithms(such as peak area,principal component analysis,artificial neural network,partial least squares,and Monte Carlo library least squares methods)are an essential part of the development of intelligent ore sorting equipment in the future.展开更多
Purpose:Measuring the exact technology complementarity between different institutions is necessary to obtain complementary technology resources for R&D cooperation.Design/methodology/approach:This study constructs...Purpose:Measuring the exact technology complementarity between different institutions is necessary to obtain complementary technology resources for R&D cooperation.Design/methodology/approach:This study constructs a morphology-driven method for measuring technology complementarity,taking medical field as an example.First,we calculate semantic similarities between subjects(S and S)and action-objects(AO and AO)based on the Metathesaurus,forming clusters of S and AO based on a semantic similarity matrix.Second,we identify key technology issues and methods based on clusters of S and AO.Third,a technology morphology matrix of several dimensions is constructed using morphology analysis,and the matrix is filled with subjects-action-objects(SAO)structures according to corresponding key technology issues and methods for different institutions.Finally,the technology morphology matrix is used to measure the technology complementarity between different institutions based on SAO.Findings:The improved technology complementarity method based on SAO is more of a supplementary and refined framework for the traditional IPC method.Research limitations:In future studies we will reprocess and identify the SAO structures which were not in the technology morphology matrix,and find other methods to characterize key technical issues and methods.Furthermore,we will add the comparison between proposed method and traditional and mostly used complementarity measurement method based on industry chain and industry code.Practical implications:This study takes medical field as an example.The morphology-driven method for measuring technology complementarity can be migrated and applied for any given field.Originality/value:From the perspective of complementary technology resources,this study develops and tests a more accurate morphology-driven method for technology complementarity measurement.展开更多
In this review, we highlight the latest development of multi-channel microfluidic chip-mass spectrometry（chip-MS） in cell analysis and metabolite detection. Following a brief introduction about history and developme...In this review, we highlight the latest development of multi-channel microfluidic chip-mass spectrometry（chip-MS） in cell analysis and metabolite detection. Following a brief introduction about history and development of multi-channel microchip and MS combination, we will elaborate the key issues of constructing chip-MS platform interface. Then exciting progresses made in this field should be reviewed with well exemplified works, including chip-MS technology for cell introduction, pretreatment of cell secretions and cell metabolite analysis. We will also describe the development of integrated total analysis systems proposed by our group. We hope this brief review will inspire interested readers and provide knowledge about chip-MS platform in the bioanalysis field, particularly in cell analysis and metabolite identifying applications.展开更多
Electrodynamic tethered deorbit technology is a novel way to remove abandoned spacecrafts like upper stages or unusable satellites. This paper investigates and analyses the deorbit performance and mission applicabilit...Electrodynamic tethered deorbit technology is a novel way to remove abandoned spacecrafts like upper stages or unusable satellites. This paper investigates and analyses the deorbit performance and mission applicability of the electrodynamic tethered system. To do so, the electrodynamic tethered deorbit dynamics with multi-perturbation is firstly formulated, where the Earth magnetic field, the atmospheric drag, and the Earth oblateness effect are considered. Then, the key system parameters, including payload mass, tether length and tether type, are analyzed by numerical simulations to investigate their influences on the deorbit performance and to give the setting principles for choosing system parameters. Based on this and given an appropriate group of system parameters, numerical simulations are undertaken to study the impact of the mission parameters, including orbit height and orbit inclination, and thus to investigate the mission applicability of the electrodynamic tethered deorbit technology.展开更多
In order to improve the implementability of municipal road design,the rational application of BIM Technology in the process of road design is a common method in current road engineering design units.The advantages of ...In order to improve the implementability of municipal road design,the rational application of BIM Technology in the process of road design is a common method in current road engineering design units.The advantages of BIM Technology,such as visualization,simulation,coordination and optimization,are increasingly recognized by the industry.In this paper,the author draws on many years of practical experience to introduce the advantages of BIM Technology,as well as how to apply BIM Technology to optimize municipal road design work and to discuss some views,in the hopes of assisting in the further improvement of the level of municipal road constructions in China.展开更多
China is rich in minerals. At present, coal shearer and synthetic equipment are mainly used in coal mining. Fully consider the actual production situation and the technical basis, realize the reasonable automatic extr...China is rich in minerals. At present, coal shearer and synthetic equipment are mainly used in coal mining. Fully consider the actual production situation and the technical basis, realize the reasonable automatic extraction technology of three machines, develop the whole working face centralized production automation system suitable for coal-bed methane mining technology and better solve the problem of safe and efficient automatic extraction of working face.展开更多
Background A task assigned to space exploration satellites involves detecting the physical environment within a certain space.However,space detection data are complex and abstract.These data are not conducive for rese...Background A task assigned to space exploration satellites involves detecting the physical environment within a certain space.However,space detection data are complex and abstract.These data are not conducive for researchers'visual perceptions of the evolution and interaction of events in the space environment.Methods A time-series dynamic data sampling method for large-scale space was proposed for sample detection data in space and time,and the corresponding relationships between data location features and other attribute features were established.A tone-mapping method based on statistical histogram equalization was proposed and applied to the final attribute feature data.The visualization process is optimized for rendering by merging materials,reducing the number of patches,and performing other operations.Results The results of sampling,feature extraction,and uniform visualization of the detection data of complex types,long duration spans,and uneven spatial distributions were obtained.The real-time visualization of large-scale spatial structures using augmented reality devices,particularly low-performance devices,was also investigated.Conclusions The proposed visualization system can reconstruct the three-dimensional structure of a large-scale space,express the structure and changes in the spatial environment using augmented reality,and assist in intuitively discovering spatial environmental events and evolutionary rules.展开更多
This paper focuses on the design of fixtures for NP2 and NP4 cylinder heads on a horizontal machining center of flexible machining automatic lines.It began with an analysis of the diagrams of part processing and worki...This paper focuses on the design of fixtures for NP2 and NP4 cylinder heads on a horizontal machining center of flexible machining automatic lines.It began with an analysis of the diagrams of part processing and working procedure which formed the basis for the design of the processing technology scheme,a selection of suitable machine tools,and the setting of processing parameters.Fixtures tailored to the chosen machine tools were then designed to meet the processing requirements.Additional aspects of the project included the design of part drawings,calculation of working time quota,design of auxiliary guides,support clamping,and hydraulic circuits,all aimed at fulfilling practical production requirements.展开更多
The current cost-plus natural gas pricing mechanism makes the gas price too low,resulting in a lot of consumer-side subsidies and over-consumed natural gas.This paper applies the price-gap approach and input-output an...The current cost-plus natural gas pricing mechanism makes the gas price too low,resulting in a lot of consumer-side subsidies and over-consumed natural gas.This paper applies the price-gap approach and input-output analysis technology to quantitatively analyze both the direct and indirect effects on urban residents under the condition that natural gas subsidies are cancelled in China in 2007.It is shown that the gas price will increase by 33.3%-41.6%,and the residential consumption expenditure by 0.26%-0.33%.The low-income groups are mostly affected,so different subsidies should be implemented to make subsidies more efficient.展开更多
The paper conducts analysis on the causes of dangerous goods road transportation accidents by applying analytic technique of security system science - Event Tree Analysis （ETA）. By computing minimum cut and minimal ...The paper conducts analysis on the causes of dangerous goods road transportation accidents by applying analytic technique of security system science - Event Tree Analysis （ETA）. By computing minimum cut and minimal path set of event tree and the important level of elementary event, the paper elicits the results that the factors of causing road transportation accident are multiple and its hazard is great while the paper also elicits the sorting of structural important level of elementary event. The paper offers the security countermeasures for dangerous goods road transportation which plays a vital role in safeguarding dangerous goods road transportation security.展开更多
Objective:To use fetal heart quantification(fetal HQ)technology to compare the coarctation of the aorta(CoA)and normal fetal heart structure and systolic function and to assess whether there are abnormalities in the f...Objective:To use fetal heart quantification(fetal HQ)technology to compare the coarctation of the aorta(CoA)and normal fetal heart structure and systolic function and to assess whether there are abnormalities in the fetal heart structure and systolic function associated with CoA.Methods:This prospective cohort study was conducted from May 2020 to December 2022 and involved 18–40-week-old singleton pregnancies and 30 fetuses diagnosed with CoA using fetal echocardiography at the General Hospital of Ningxia Medical University and Peking University First Hospital Ningxia Women’s andChildren’s Hospital,China.The control group contained 60 normal fetuses.The following parameters were recorded and analyzed statistically:four-chamber view(4CV)end-diastolic long diameter,4CV epicardial–contralateral epicardial transverse maximum diameter,4CV global sphericity index(GSI),left ventricular(LV)and right ventricular(RV)24-segment end-diastolic diameter(EDD),24-segment sphericity index(SI),LV-fractional area change(LV-FAC),LV-longitudinal strain(LV-LS),RV-fractional area change(RV-FAC),RV-longitudinal strain(RV-LS),and LV and RV 24-segment transverse fractional shortening(FS).Measurement data were compared between the two groups using an independent sample t test,with P<0.05 indicating statistically significant differences.Moreover,the correlation between gestational age and GSI,LV-FAC,LV-LS,RV-FAC,and RV-LS was assessed.Results:Within and between observer comparisons of the parameters associated with major cardiac function revealed an intragroup correlation coefficient of>0.9,indicating high consistency,and a coefficient of variable of<1%,indicating low variability.Correlation analysis revealed no obvious correlation between gestational age and GSI,LV-FAC,LV-LS,RV-FAC,and RV-LS.A comparison of the fourchamber morphological structural parameters of the hearts in the two groups revealed that when compared with the control group,the 4CV end-diastolic long diameter was shortened in fetuses in the CoA group and the epicardial–contralateral epicardial transverse maximum diameter was wider,while the GSI was lower(P<0.05).A comparison of the LV and RV morphological structure parameters between the two groups revealed that when compared with the control group,the LV’s 24-segment EDD was smaller in the CoA group,the RV’s 24-segment EDD was greater in the control group,the SI of the LV’s segments 16–24 was greater than in the control group,and the SI of the RV’s segments 7–24 was less than in the control group(all P<0.05).When comparedwith fetuses in the control group,the LV’s segments16–24 were greater in the CoA group,whereas the RV’s segment 6–24 was smaller(P<0.05).When comparedwith the control group,LV-FAC,RV-FAC,and LS were lower in the CoA group(P<0.05).The FS of the LV segments 1–24 and the FS of the RV segments 1–16 were smaller in the CoA group than in the normal group(P<0.05).Conclusion:Fetal HQ,a new simple technique that offers rapid analysis and high repeatability,can quantitatively evaluate structural and systolic function changes in fetuses with CoA.展开更多
The year of 2011 is considered the first year of big data market in China.Compared with the global scale,China's big data growth will be faster than the global average growth rate,and China will usher in the rapid...The year of 2011 is considered the first year of big data market in China.Compared with the global scale,China's big data growth will be faster than the global average growth rate,and China will usher in the rapid expansion of big data market in the next few years.This paper presents the overall big data development in China in terms of market scale and development stages,enterprise development in the industry chain,the technology standards,and industrial applications.The paper points out the issues and challenges facing big data development in China and proposes to make polices and create support approaches for big data transactions and personal privacy protection.展开更多
This paper describes the analysis and design of an assistive device for elderly people under development at the EgyptJapan University of Science and Technology（E-JUST） named E-JUST assistive device（EJAD）.Several e...This paper describes the analysis and design of an assistive device for elderly people under development at the EgyptJapan University of Science and Technology（E-JUST） named E-JUST assistive device（EJAD）.Several experiments were carried out using a motion capture system（VICON） and inertial sensors to identify the human posture during the sit-to-stand motion.The EJAD uses only two inertial measurement units（IMUs） fused through an adaptive neuro-fuzzy inference systems（ANFIS） algorithm to imitate the real motion of the caregiver.The EJAD consists of two main parts,a robot arm and an active walker.The robot arm is a 2-degree-of-freedom（2-DOF） planar manipulator.In addition,a back support with a passive joint is used to support the patient s back.The IMUs on the leg and trunk of the patient are used to compensate for and adapt to the EJAD system motion depending on the obtained patient posture.The ANFIS algorithm is used to train the fuzzy system that converts the IMUs signals to the right posture of the patient.A control scheme is proposed to control the system motion based on practical measurements taken from the experiments.A computer simulation showed a relatively good performance of the EJAD in assisting the patient.展开更多
基金supported by the Major Special Science and Technology Plan(202302AA310020)the National Natural Science Foundation of China(NSFC)(32072925,32473087)the National Student Innovation and Entrepreneurship Training Program of Huazhong Agricultural University(202310504018)。
文摘Frequent extreme heat events around the world not only pose a major threat to human health but also cause significant economic losses to the livestock industry.The existing management practices are insufficient to fully prevent heat stress with an urgent need to develop preventive medicines.The aim of this study was to develop an antiheat stress Chinese herbal formula(CHF)via big data analysis techniques and to evaluate its anti-heat stress effect and mechanism of action via pharmacodynamic evaluation and network pharmacology analysis.Many anti-heat stress CHFs were collected from the Chinese National Knowledge Infrastructure(CNKI)database.Three alternative CHFs were obtained via unsupervised entropy hierarchical clustering analysis,and the most effective CHF against heat stress,Shidi Jieshu decoction(SJD),was obtained by screening in a mouse heat stress model.In dry and hot environments,SJD significantly improved the heat tolerance of AA broilers by 4-6℃.In a humid and hot environment,pretreatment with 2%SJD resulted in 100%survival of Wenchang chickens at high temperatures.The main active ingredients of SJD were identified as muntjacoside E,timosaponin C,macrostemonoside H and mangiferin via ultraperformance liquid chromatography/mass spectrometry(UPLC/MS)and database comparison.The active ingredients of SJD were found to target tumor necrosis factor-α(TNF-α),signal transducer activator of transcription 3(STAT3)and epidermal growth factor receptor(EGFR).Finally,the safety of the new formulation was assessed in an acute oral toxicity study in rats.The SJDs developed in this study provide a new option for the prevention of heat stress in animal husbandry and offer new insights for further research on anti-heat stress.
基金This work was supported by the National Key Research and Development Program of China(2017YFD0701603)Natural Science Foundation of China(61473235).
文摘In order to realize the automatic monitoring of ruminant activities of cows,an automatic detection method for the mouth area of ruminant cows based on machine vision technology was studied.Optical flow was used to calculate the relative motion speed of each pixel in the video frame images.The candidate mouth region with large motion ranges was extracted,and a series of processing methods,such as grayscale processing,threshold segmentation,pixel point expansion and adjacent region merging,were carried out to extract the real area of cows’mouth.To verify the accuracy of the proposed method,six videos with a total length of 96 min were selected for this research.The results showed that the highest accuracy was 87.80%,the average accuracy was 76.46%and the average running time of the algorithm was 6.39 s.All the results showed that this method can be used to detect the mouth area automatically,which lays the foundation for automatic monitoring of cows’ruminant behavior.
文摘In order to forecast promising technologies in the field of next generation mobile communication, various patent indicators were analyzed such as citation per patent, patent family information, patent share, increase rate, and patent activity. These indicators were quantified into several indexes and then integrated into an evaluation score to provide promising technologies. As a result of the suggested patent analysis, four technologies out of twenty two in details classification were selected, which showed outstanding technology competitiveness, high patent share and increasing rates as well as high recent-patent-ratios and triad-patent-family-ratios. Each of the selected technologies scored more than 10 points in total, and the following four technologies were suggested as promising ones in the field of next generation mobile communication: 1) 3GPP based mobile communication, 2) beyond 4G mobile communication, 3) IEEE 802.16 based mobile communication, which are in medium classification of broadband mobile communication system, and 4) testing/certification system of mobile communication, which is in medium classification of mobile communication testing/certification system.
基金supported by the National Key Technology Research and Development Program of the Ministry of Science and Technology of China (No. 2011BAI03B00)the National Science and Technology Major Project of the Ministry of Science and Technology of China (No. 2011ZX09401-305)
文摘Oviductus Ranae is the dried oviduct of female Rana tem-poraria chensinensis （David）, distributed mainly in North- eastern China. Oviductus Ranae is one of the best-known and highly valued oriental foods and medicines. Traditional Chinese medicine holds that Oviductus Ranae can nourish yin, moisten lung and replenish the kidney essence. Meanwhile, activities of Oviductus Ranae such as anti-aging, anti-lipemic, anti-oxidation and anti-fatigue have also been demonstrated by modern phar-macological studies. Previous studies have shown that Oviductus Ranae is mainly composed of proteins, which are up to 50% or more.
文摘1 GSM-WLL Technology1.1 GSM-WLL System ArchitectureAWLL (Wireless Local Loop)is a radioaccess system for users to access PSTN(Public Switched Telephone Network).It isa substitute for conventional wiredaccess.The GSM-WLL system makes use ofGSM technologies to achieve WLL.As shown in Figure 1,a GSM-WLL system
基金supported by the National Science and Technology Support Program of China(No.2012BAC11B07)the Jiangxi Science and Technology Innovation Base Plan(No.20212BCD42017)。
文摘Under the background of increasingly scarce ore worldwide and increasingly fierce market competition,developing the mining industry could be strongly restricted.Intelligent ore sorting equipment not only improves ore use and enhances the economic benefits of enterprises but also increases the ore grade and lessens the grinding cost and tailings production.However,long-term research on intelligent ore sorting equipment found that the factors affecting sorting efficiency mainly include ore information identification technology,equipment sorting actuator,and information processing algorithm.The high precision,strong anti-interference capability,and high speed of these factors guarantee the separation efficiency of intelligent ore sorting equipment.Color ore sorter,X-ray ore transmission sorter,dual-energy X-ray transmission ore sorter,X-ray fluorescence ore sorter,and near-infrared ore sorter have been successfully developed in accordance with the different characteristics of minerals while ensuring the accuracy of equipment sorting and improving the equipment sorting efficiency.With the continuous improvement of mine automation level,the application of online element rapid analysis technology with high speed,high precision,and strong anti-interference capability in intelligent ore sorting equipment will become an inevitable trend of equipment development in the future.Laser-induced breakdown spectroscopy,transientγneutron activation analysis,online Fourier transform infrared spectroscopy,and nuclear magnetic resonance techniques will promote the development of ore sorting equipment.In addition,the improvement and joint application of additional high-speed and high-precision operation algorithms(such as peak area,principal component analysis,artificial neural network,partial least squares,and Monte Carlo library least squares methods)are an essential part of the development of intelligent ore sorting equipment in the future.
基金This work was supported by the General Program of National Natural Science Foundation of China under(Grant Nos.71774012,72104246,71673024)the Fundamental Research Funds for the Central Universities(22CX04010B)the strategic research project of the Development Planning Bureau of the Chinese Academy of Sciences(Grant No.GHJ-ZLZX-2019-42).The findings and observations in this paper are those of the authors and do not necessarily reflect the views of the supporters.
文摘Purpose:Measuring the exact technology complementarity between different institutions is necessary to obtain complementary technology resources for R&D cooperation.Design/methodology/approach:This study constructs a morphology-driven method for measuring technology complementarity,taking medical field as an example.First,we calculate semantic similarities between subjects(S and S)and action-objects(AO and AO)based on the Metathesaurus,forming clusters of S and AO based on a semantic similarity matrix.Second,we identify key technology issues and methods based on clusters of S and AO.Third,a technology morphology matrix of several dimensions is constructed using morphology analysis,and the matrix is filled with subjects-action-objects(SAO)structures according to corresponding key technology issues and methods for different institutions.Finally,the technology morphology matrix is used to measure the technology complementarity between different institutions based on SAO.Findings:The improved technology complementarity method based on SAO is more of a supplementary and refined framework for the traditional IPC method.Research limitations:In future studies we will reprocess and identify the SAO structures which were not in the technology morphology matrix,and find other methods to characterize key technical issues and methods.Furthermore,we will add the comparison between proposed method and traditional and mostly used complementarity measurement method based on industry chain and industry code.Practical implications:This study takes medical field as an example.The morphology-driven method for measuring technology complementarity can be migrated and applied for any given field.Originality/value:From the perspective of complementary technology resources,this study develops and tests a more accurate morphology-driven method for technology complementarity measurement.
基金supported by National Natural Science Foundation of China (Nos. 81373373, 21435002, 21621003)
文摘In this review, we highlight the latest development of multi-channel microfluidic chip-mass spectrometry（chip-MS） in cell analysis and metabolite detection. Following a brief introduction about history and development of multi-channel microchip and MS combination, we will elaborate the key issues of constructing chip-MS platform interface. Then exciting progresses made in this field should be reviewed with well exemplified works, including chip-MS technology for cell introduction, pretreatment of cell secretions and cell metabolite analysis. We will also describe the development of integrated total analysis systems proposed by our group. We hope this brief review will inspire interested readers and provide knowledge about chip-MS platform in the bioanalysis field, particularly in cell analysis and metabolite identifying applications.
文摘Electrodynamic tethered deorbit technology is a novel way to remove abandoned spacecrafts like upper stages or unusable satellites. This paper investigates and analyses the deorbit performance and mission applicability of the electrodynamic tethered system. To do so, the electrodynamic tethered deorbit dynamics with multi-perturbation is firstly formulated, where the Earth magnetic field, the atmospheric drag, and the Earth oblateness effect are considered. Then, the key system parameters, including payload mass, tether length and tether type, are analyzed by numerical simulations to investigate their influences on the deorbit performance and to give the setting principles for choosing system parameters. Based on this and given an appropriate group of system parameters, numerical simulations are undertaken to study the impact of the mission parameters, including orbit height and orbit inclination, and thus to investigate the mission applicability of the electrodynamic tethered deorbit technology.
文摘In order to improve the implementability of municipal road design,the rational application of BIM Technology in the process of road design is a common method in current road engineering design units.The advantages of BIM Technology,such as visualization,simulation,coordination and optimization,are increasingly recognized by the industry.In this paper,the author draws on many years of practical experience to introduce the advantages of BIM Technology,as well as how to apply BIM Technology to optimize municipal road design work and to discuss some views,in the hopes of assisting in the further improvement of the level of municipal road constructions in China.
文摘China is rich in minerals. At present, coal shearer and synthetic equipment are mainly used in coal mining. Fully consider the actual production situation and the technical basis, realize the reasonable automatic extraction technology of three machines, develop the whole working face centralized production automation system suitable for coal-bed methane mining technology and better solve the problem of safe and efficient automatic extraction of working face.
文摘Background A task assigned to space exploration satellites involves detecting the physical environment within a certain space.However,space detection data are complex and abstract.These data are not conducive for researchers'visual perceptions of the evolution and interaction of events in the space environment.Methods A time-series dynamic data sampling method for large-scale space was proposed for sample detection data in space and time,and the corresponding relationships between data location features and other attribute features were established.A tone-mapping method based on statistical histogram equalization was proposed and applied to the final attribute feature data.The visualization process is optimized for rendering by merging materials,reducing the number of patches,and performing other operations.Results The results of sampling,feature extraction,and uniform visualization of the detection data of complex types,long duration spans,and uneven spatial distributions were obtained.The real-time visualization of large-scale spatial structures using augmented reality devices,particularly low-performance devices,was also investigated.Conclusions The proposed visualization system can reconstruct the three-dimensional structure of a large-scale space,express the structure and changes in the spatial environment using augmented reality,and assist in intuitively discovering spatial environmental events and evolutionary rules.
文摘This paper focuses on the design of fixtures for NP2 and NP4 cylinder heads on a horizontal machining center of flexible machining automatic lines.It began with an analysis of the diagrams of part processing and working procedure which formed the basis for the design of the processing technology scheme,a selection of suitable machine tools,and the setting of processing parameters.Fixtures tailored to the chosen machine tools were then designed to meet the processing requirements.Additional aspects of the project included the design of part drawings,calculation of working time quota,design of auxiliary guides,support clamping,and hydraulic circuits,all aimed at fulfilling practical production requirements.
基金Supported by Strategic Priority Research Program of Chinese Academy of Sciences (No. XDA05150600)National Natural Science Foundation of China (No. 71041006 and No. 70903066)
文摘The current cost-plus natural gas pricing mechanism makes the gas price too low,resulting in a lot of consumer-side subsidies and over-consumed natural gas.This paper applies the price-gap approach and input-output analysis technology to quantitatively analyze both the direct and indirect effects on urban residents under the condition that natural gas subsidies are cancelled in China in 2007.It is shown that the gas price will increase by 33.3%-41.6%,and the residential consumption expenditure by 0.26%-0.33%.The low-income groups are mostly affected,so different subsidies should be implemented to make subsidies more efficient.
文摘The paper conducts analysis on the causes of dangerous goods road transportation accidents by applying analytic technique of security system science - Event Tree Analysis （ETA）. By computing minimum cut and minimal path set of event tree and the important level of elementary event, the paper elicits the results that the factors of causing road transportation accident are multiple and its hazard is great while the paper also elicits the sorting of structural important level of elementary event. The paper offers the security countermeasures for dangerous goods road transportation which plays a vital role in safeguarding dangerous goods road transportation security.
基金funded by the Ningxia Natural Science Foundation(grant ID.2022A1467).
文摘Objective:To use fetal heart quantification(fetal HQ)technology to compare the coarctation of the aorta(CoA)and normal fetal heart structure and systolic function and to assess whether there are abnormalities in the fetal heart structure and systolic function associated with CoA.Methods:This prospective cohort study was conducted from May 2020 to December 2022 and involved 18–40-week-old singleton pregnancies and 30 fetuses diagnosed with CoA using fetal echocardiography at the General Hospital of Ningxia Medical University and Peking University First Hospital Ningxia Women’s andChildren’s Hospital,China.The control group contained 60 normal fetuses.The following parameters were recorded and analyzed statistically:four-chamber view(4CV)end-diastolic long diameter,4CV epicardial–contralateral epicardial transverse maximum diameter,4CV global sphericity index(GSI),left ventricular(LV)and right ventricular(RV)24-segment end-diastolic diameter(EDD),24-segment sphericity index(SI),LV-fractional area change(LV-FAC),LV-longitudinal strain(LV-LS),RV-fractional area change(RV-FAC),RV-longitudinal strain(RV-LS),and LV and RV 24-segment transverse fractional shortening(FS).Measurement data were compared between the two groups using an independent sample t test,with P<0.05 indicating statistically significant differences.Moreover,the correlation between gestational age and GSI,LV-FAC,LV-LS,RV-FAC,and RV-LS was assessed.Results:Within and between observer comparisons of the parameters associated with major cardiac function revealed an intragroup correlation coefficient of>0.9,indicating high consistency,and a coefficient of variable of<1%,indicating low variability.Correlation analysis revealed no obvious correlation between gestational age and GSI,LV-FAC,LV-LS,RV-FAC,and RV-LS.A comparison of the fourchamber morphological structural parameters of the hearts in the two groups revealed that when compared with the control group,the 4CV end-diastolic long diameter was shortened in fetuses in the CoA group and the epicardial–contralateral epicardial transverse maximum diameter was wider,while the GSI was lower(P<0.05).A comparison of the LV and RV morphological structure parameters between the two groups revealed that when compared with the control group,the LV’s 24-segment EDD was smaller in the CoA group,the RV’s 24-segment EDD was greater in the control group,the SI of the LV’s segments 16–24 was greater than in the control group,and the SI of the RV’s segments 7–24 was less than in the control group(all P<0.05).When comparedwith fetuses in the control group,the LV’s segments16–24 were greater in the CoA group,whereas the RV’s segment 6–24 was smaller(P<0.05).When comparedwith the control group,LV-FAC,RV-FAC,and LS were lower in the CoA group(P<0.05).The FS of the LV segments 1–24 and the FS of the RV segments 1–16 were smaller in the CoA group than in the normal group(P<0.05).Conclusion:Fetal HQ,a new simple technique that offers rapid analysis and high repeatability,can quantitatively evaluate structural and systolic function changes in fetuses with CoA.
文摘The year of 2011 is considered the first year of big data market in China.Compared with the global scale,China's big data growth will be faster than the global average growth rate,and China will usher in the rapid expansion of big data market in the next few years.This paper presents the overall big data development in China in terms of market scale and development stages,enterprise development in the industry chain,the technology standards,and industrial applications.The paper points out the issues and challenges facing big data development in China and proposes to make polices and create support approaches for big data transactions and personal privacy protection.
基金supported in part by a scholarship provided by the Mission DepartmentMinistry of Higher Education of the Government of Egypt
文摘This paper describes the analysis and design of an assistive device for elderly people under development at the EgyptJapan University of Science and Technology（E-JUST） named E-JUST assistive device（EJAD）.Several experiments were carried out using a motion capture system（VICON） and inertial sensors to identify the human posture during the sit-to-stand motion.The EJAD uses only two inertial measurement units（IMUs） fused through an adaptive neuro-fuzzy inference systems（ANFIS） algorithm to imitate the real motion of the caregiver.The EJAD consists of two main parts,a robot arm and an active walker.The robot arm is a 2-degree-of-freedom（2-DOF） planar manipulator.In addition,a back support with a passive joint is used to support the patient s back.The IMUs on the leg and trunk of the patient are used to compensate for and adapt to the EJAD system motion depending on the obtained patient posture.The ANFIS algorithm is used to train the fuzzy system that converts the IMUs signals to the right posture of the patient.A control scheme is proposed to control the system motion based on practical measurements taken from the experiments.A computer simulation showed a relatively good performance of the EJAD in assisting the patient.
