[Objective]This study aims to investigate the multi-body hydrodynamic interaction mechanisms during offshore lifting operations of aquaculture net cages in wind-fishery integration systems.By integrating numerical sim...[Objective]This study aims to investigate the multi-body hydrodynamic interaction mechanisms during offshore lifting operations of aquaculture net cages in wind-fishery integration systems.By integrating numerical simulations and dynamic analysis methods,this study systematically investigates the coupled dynamic response characteristics during the cage-carrier vessel separation process to reveal its dynamic evolution patterns and key influence mechanisms.[Method]Based on potential flow theory,a fully coupled dynamic analysis model of crane vessel-net cage-semi-submersible barge was established for a marine ranch project in Guangdong.The complete lifting process was dynamically simulated using SESAM software.Five typical operating sea states were configured to investigate the influence of wave parameters on the system's motion response under combined wave-current-wind actions.[Result]The results demonstrate that wave period dominates the system stability.Under short-period conditions,the system maintains stable motion with relatively small horizontal relative displacements,while long-period conditions excite low-frequency resonance,leading to significant slow-drift motions.Vertical response analysis reveals that long-period waves cause severe relative displacement fluctuations between the cage and semi-submersible vessel,with actual displacement amplitudes doubling the preset safety target of 2.045 m.Quantitative analysis further indicates that when significant wave height increases from 1.0 m to 1.5 m,the actual displacement amplitude increases by approximately 20%relative to the target displacement of 2.045 m,demonstrating that its influence is significantly weaker than the displacement variations induced by wave period changes.The complete dynamic simulation successfully captures the continuous dynamic response characteristics during the lifting process.[Conclusion]This research clarifies the influence mechanisms of wave parameters on the cage lifting process,identifying wave period as the crucial factor for operational safety.An operation window assessment method incorporating multi-body coupling effects is established,proposing a safety criterion with peak period not exceeding six seconds as the core requirement.The findings provide theoretical foundation for safe installation of marine ranch net cages and offer valuable references for similar offshore lifting operations.展开更多
Background:Receptor-interacting protein kinases(RIPKs)regulate cell death,inflammation,and immune responses,yet their roles in cancer are not fully understood.This study investigates the expression,genomic alterations...Background:Receptor-interacting protein kinases(RIPKs)regulate cell death,inflammation,and immune responses,yet their roles in cancer are not fully understood.This study investigates the expression,genomic alterations,and functional implications of RIPK family members across various cancers.Methods:We collected multi-omics data from The Cancer Genome Atlas and other public databases,including gene expression,copy number variation(CNV),mutation,methylation,tumor mutation burden(TMB),and microsatellite instability(MSI).Differential expression and survival analyses were performed using DESeq2 and Cox proportional hazards models.CNV and mutation data were analyzed with GISTIC2 and Mutect2,and methylation data with the ChAMP package.Correlations with TMB and MSI were assessed using Pearson coefficients,and gene set enrichment analysis was conducted with the MSigDB Hallmark gene sets.Results:RIPK family members show significant differential expression in various cancers,with RIPK1 and RIPK4 frequently altered.Survival analysis reveals heterogeneous impacts on overall survival.CNV and mutation analyses identify high alteration frequencies for RIPK2 and RIPK7,affecting gene expression.RIPK1 and RIPK7 are hypermethylated in several cancers,inversely correlating with RIPK3 expression.RIPK1,RIPK2,RIPK5,RIPK6,and RIPK7 correlate positively with TMB,while RIPK3 shows negative correlations in some cancers.MSI analysis indicates associations with DNA mismatch repair.G ene set enrichment analysis highlights immune-related pathway enrichment for RIPK1,RIPK2,RIPK3,and RIPK6,and cell proliferation and DNA repair pathways for RIPK4 and RIPK5.RIPK family members showed heterogeneous alterations across cancers:for example,RIPK7 was mutated in up to~15%of u terine c orpus e ndometrial c arcinoma and l ung s quamous c ell c arcinoma cases,and RIPK1 and RIPK7 exhibited frequent promoter hypermethylation in multiple tumor types.Several genes displayed context-dependent associations with overall survival and with TMB/MSI.Conclusion:This pan-cancer analysis of the RIPK family reveals their diverse roles and potential as biomarkers and therapeutic targets.The findings emphasize the importance of RIPK genes in tumorigenesis and suggest context-dependent functions across cancer types.Further studies are needed to explore their mechanisms in cancer development and clinical applications.展开更多
The sulfation and decomposition process has proven effective in selectively extracting lithium from lepidolite.It is essential to clarify the thermochemical behavior and kinetic parameters of decomposition reactions.A...The sulfation and decomposition process has proven effective in selectively extracting lithium from lepidolite.It is essential to clarify the thermochemical behavior and kinetic parameters of decomposition reactions.Accordingly,comprehensive kinetic study by employing thermalgravimetric analysis at various heating rates was presented in this paper.Two main weight loss regions were observed during heating.The initial region corresponded to the dehydration of crystal water,whereas the subsequent region with overlapping peaks involved complex decomposition reactions.The overlapping peaks were separated into two individual reaction peaks and the activation energy of each peak was calculated using isoconversional kinetics methods.The activation energy of peak 1 exhibited a continual increase as the reaction conversion progressed,while that of peak 2 steadily decreased.The optimal kinetic models,identified as belonging to the random nucleation and subsequent growth category,provided valuable insights into the mechanism of the decomposition reactions.Furthermore,the adjustment factor was introduced to reconstruct the kinetic mechanism models,and the reconstructed models described the kinetic mechanism model more accurately for the decomposition reactions.This study enhanced the understanding of the thermochemical behavior and kinetic parameters of the lepidolite sulfation product decomposition reactions,further providing theoretical basis for promoting the selective extraction of lithium.展开更多
AIM:To perform a bibliometric analysis of publications focusing on inflammatory mechanisms in glaucoma,thereby comprehensively understanding the current research status and identifying potential frontier directions fo...AIM:To perform a bibliometric analysis of publications focusing on inflammatory mechanisms in glaucoma,thereby comprehensively understanding the current research status and identifying potential frontier directions for future studies.METHODS:A systematic search was conducted in the Web of Science Core Collection(WoSCC)database to retrieve relevant literature published from January 1,2000,to August 31,2025(data accessed on September 12,2025).Multiple data visualization tools were employed to conduct in-depth analyses of the included publications,covering aspects such as publication quantity and quality,evolutionary trends of research hotspots,keyword cooccurrence networks,and collaborative patterns among countries/regions,institutions,and authors.RESULTS:A total of 3381 articles related to glaucoma inflammation were extracted from WoSCC.The analysis showed that the USA had the highest research output in this field(29.04%,n=982),followed by China(18.40%,n=622)and UK(6.01%,n=203).Based on citation frequency and burst intensity,the USA also ranked as the most influential country.Baudouin C and Sun X were identified as the most productive authors,while Journal of Glaucoma and Investigative Ophthalmology&Visual Science were the journals with the highest number of published relevant articles.Additionally,keyword analysis revealed that“neuroinflammation”,“retinal ganglion cells(RGCs)”,“pathophysiology”,and“traditional Chinese medicine”are emerging research hotspots in the field of immuneinflammatory responses in glaucoma.CONCLUSION:This study presents a comprehensive bibliometric overview of research on glaucoma-related inflammation,indicating that this field has received extensive scientific attention with a steady upward trend in research activity.Furthermore,it establishes a theoretical basis for the development of neuroinflammation-targeted therapeutic strategies for glaucoma and emphasizes the necessity of strengthening interdisciplinary collaboration to promote the clinical translation of research findings.展开更多
This study investigates the uncertain dynamic characterization of hybrid composite plates by employing advanced machine-assisted finite element methodologies.Hybrid composites,widely used in aerospace,automotive,and s...This study investigates the uncertain dynamic characterization of hybrid composite plates by employing advanced machine-assisted finite element methodologies.Hybrid composites,widely used in aerospace,automotive,and structural applications,often face variability in material properties,geometric configurations,and manufacturing processes,leading to uncertainty in their dynamic response.To address this,three surrogate-based machine learning approaches like radial basis function(RBF),multivariate adaptive regression splines(MARS),and polynomial neural networks(PNN)are integrated with a finite element framework to efficiently capture the stochastic behavior of these plates.The research focuses on predicting the first three natural frequencies under material uncertainties,which are critical to ensuring structural reliability.Monte Carlo simulation(MCS)is used as a benchmark for generating probabilistic datasets,including mean values,standard deviations,and probability density functions.The surrogate models are then trained and validated against these datasets,enabling accurate representation of uncertainty with substantially fewer samples compared to conventionalMCS.Among the methods studied,the RBFmodel demonstrates superior performance,closely approximating MCS results with a reduced sample size,thereby achieving significant computational savings.The proposed framework not only reduces computational time and costs but also maintains high predictive accuracy,making it well-suited for complex engineering systems.Beyond free vibration analysis,the methodology can be extended to more sophisticated scenarios,such as forced vibration,damping effects,and nonlinear structural responses.Overall,this work presents a computationally efficient and robust approach for surrogate-based uncertainty quantification,advancing the analysis and design of hybrid composite structures under uncertainty.展开更多
Rock slope instability is a prevalent geological hazard that imposes significant adverse impacts on engineering activities.Although existing studies have focused on homogeneous rock slopes,the theoretical models for q...Rock slope instability is a prevalent geological hazard that imposes significant adverse impacts on engineering activities.Although existing studies have focused on homogeneous rock slopes,the theoretical models for quantifying the stability of softhard interbedded anti-inclined slopes remain underdeveloped,primarily due to the complex force transfer mechanisms involved.This study proposed a novel theoretical model for the stability analysis of soft-hard interbedded anti-inclined slopes under rainfall conditions.The framework models stratified rock layers as layered cantilever beams with material heterogeneity.Based on the principle of deformation compatibility,it comprehensively accounted for interlayer force transfer and strength degradation resulting from differential deformations among rock layers.Furthermore,it integrated the critical instability length induced by the self-weight of rock layers to determine the fracture depth.The proposed method was validated against engineering case studies and physical model tests,with error falling within an acceptable range.Compared to existing theoretical methods,the proposed method provided a more realistic representation of the slope's stress field.The analysis results demonstrate that rainfall not only reduces the inclination angle of the failure surface but also leads to an approximate 30%decrease in the safety factor.The proposed theoretical model is particularly useful for quickly calculating the stability of soft-hard interbedded anti-inclined rock slope under rainfall conditions,compared to complex and time-consuming numerical simulation calculations.展开更多
In this work,a computational modelling and analysis framework is developed to investigate the thermal buckling behavior of doubly-curved composite shells reinforced with graphene-origami(G-Ori)auxetic metamaterials.A ...In this work,a computational modelling and analysis framework is developed to investigate the thermal buckling behavior of doubly-curved composite shells reinforced with graphene-origami(G-Ori)auxetic metamaterials.A semi-analytical formulation based on the First-Order Shear Deformation Theory(FSDT)and the principle of virtual displacements is established,and closed-form solutions are derived via Navier’s method for simply supported boundary conditions.The G-Ori metamaterial reinforcements are treated as programmable constructs whose effective thermo-mechanical properties are obtained via micromechanical homogenization and incorporated into the shell model.A comprehensive parametric study examines the influence of folding geometry,dispersion arrangement,reinforcement weight fraction,curvature parameters,and elastic foundation support on the critical buckling temperature(CBT).The results reveal that,under optimal folding geometry and reinforcement alignment with principal stress trajectories,the CBT can increase by more than 150%.Furthermore,the combined effect of G-Ori reinforcement and elastic foundation substantially enhances thermal buckling resistance.These findings establish design guidelines for architected composite shells in applications such as aerospace thermal skins,morphing structures,and thermally-responsive systems,and illustrate the potential of auxetic graphene metamaterials for multifunctional,lightweight,and thermally robust structural components.展开更多
Objective:Sepsis exhibits remarkable heterogeneity in disease progression trajectories,and accurate identificationof distinct trajectory-based phenotypes is critical for implementing personalized therapeutic strategie...Objective:Sepsis exhibits remarkable heterogeneity in disease progression trajectories,and accurate identificationof distinct trajectory-based phenotypes is critical for implementing personalized therapeutic strategies and prognostic assessment.However,trajectory clustering analysis of time-series clinical data poses substantial methodological challenges for researchers.This study provides a comprehensive tutorial framework demonstrating six trajectory modeling approaches integrated with proteomic analysis to guide researchers in identifying sepsis subtypes after laparoscopic surgery.Methods:This study employs simulated longitudinal data from 300 septic patients after laparoscopic surgery to demonstrate six trajectory modeling methods(group-based trajectory modeling,latent growth mixture modeling,latent transition analysis,time-varying effect modeling,K-means for longitudinal data,agglomerative hierarchical clustering)for identifying associations between predefinedsequential organ failure assessment trajectories and 25 proteomic biomarkers.Clustering performance was evaluated via multiple metrics,and a biomarker discovery pipeline integrating principal component analysis,random forests,feature selection,and receiver operating characteristic analysis was developed.Results:The six methods demonstrated varying performance in identifying trajectory structures,with each approach exhibiting distinct analytical characteristics.The performance metrics revealed differences across methods,which may inform context-specificmethod selection and interpretation strategies.Conclusion:This study illustrates practical implementations of trajectory modeling approaches under controlled conditions,facilitating informed method selection for clinical researchers.The inclusion of complete R code and integrated proteomics workflows offers a reproducible analytical framework connecting temporal pattern recognition to biomarker discovery.Beyond sepsis,this pipeline-oriented approach may be adapted to diverse clinical scenarios requiring longitudinal disease characterization and precision medicine applications.The comparative analysis reveals that each method has distinct strengths,providing a practical guide for clinical researchers in selecting appropriate methods based on their specificstudy goals and data characteristics.展开更多
Detecting geomagnetic anomalies preceding earthquakes is a challenging yet promising area of research that has gained increasing attention in recent years.This study introduces a novel reconstruction-based modeling ap...Detecting geomagnetic anomalies preceding earthquakes is a challenging yet promising area of research that has gained increasing attention in recent years.This study introduces a novel reconstruction-based modeling approach enhanced by negative learning,employing a Bidirectional Long Short-Term Memory(BiLSTM)network explicitly trained to accurately reconstruct non-seismic geomagnetic signals while intentionally amplifying reconstruction errors for seismic signals.By penalizing the model for accurately reconstructing seismic anomalies,the negative learning approach effectively magnifies the differences between normal and anomalous data.This strategic differentiation enhances the sensitivity of the BiLSTM network,enabling improved detection of subtle geomagnetic anomalies that may serve as earthquake precursors.Experimental validation clearly demonstrated statistically significant higher reconstruction errors for seismic signals compared to non-seismic signals,confirmed through the Mann-Whitney U test with a p-value of 0.0035 for Root Mean Square Error(RMSE).These results provide compelling evidence of the enhanced anomaly detection capability achieved through negative learning.Unlike traditional classification-based methods,negative learning explicitly encourages sensitivity to subtle precursor signals embedded within complex geomagnetic data,establishing a robust basis for further development of reliable earthquake prediction methods.展开更多
Reservoir-induced landslides in China's Three Gorges Reservoir area are prone to tensile cracks due to the influenceof their own weight and fluctuationsin water levels.The presence of cracks indicates that the ten...Reservoir-induced landslides in China's Three Gorges Reservoir area are prone to tensile cracks due to the influenceof their own weight and fluctuationsin water levels.The presence of cracks indicates that the tensile stress in the area has exceeded the tensile strength of the soil,leading to local instability.To explore the impact of tensile failure behavior on the stability and failure modes of reservoir landslides,the Huangtupo Riverside Slump#1 is taken as a case study.By considering local tensile failure,potential tensile cracks are incorporated into the analysis via the limit equilibrium method and reliability theory.The reliability of landslides under different tensile failure scenarios is quantified.Strain-softening characteristics of the soil are combined to further analyze the failure transmission path of the landslide.Finally,these potential failure modes were validated through physical model tests.The results show that cracks developing at rear positions reduce the stability of the slope and increase the probability of instability.During the destruction process,retrogressive failures with multiple sliding surfaces are likely to occur.However,tensile failure at the forefront reduces the likelihood of an individual slide mass descending.Progressive failure results in both regular and skip transmission patterns.Additionally,cracks and water level changes can also lead to shifts in the positions of the most dangerous blocks.Therefore,in practical landslide analysis and prevention,it is necessary to consider local tensile damage and identify potential tensile crack locations in advance to optimize prevention measures and accurately evaluate landslide risk.展开更多
This study explores the core characteristics,dynamic progression of the depression-anxiety-stress network among Chinese higher vocational college freshmen and its association with life satisfaction,and identifies key ...This study explores the core characteristics,dynamic progression of the depression-anxiety-stress network among Chinese higher vocational college freshmen and its association with life satisfaction,and identifies key nodes and critical intervention points.Participants were 295 higher vocational college freshmen(male=137;M=18.52,SD=0.69)completing two follow-up surveys(5-month interval).Measures included depression-anxiety-stress symptoms and life satisfaction,analyzed via cross-sectional and binary cross-lagged panel network analysis.The results showed that“Easily agitated”was the central node(strength=1.519,EI=1.967);“Irritable”and“Mouth Dryness”were top predictors(Out-EI=1.101,1.100),with depressive symptoms as the convergence hub.“Easily agitated”had the strongest direct negative impact on life satisfaction(cross-cluster out-predictability=−0.653).This study elucidates depression-anxietystress network mechanisms in higher vocational freshmen,providing a theoretical framework and targeted intervention guidance(e.g.,focusing on somatic and emotional nodes).展开更多
The pathogenesis-related protein PR10 plays a vital role in plant growth,development,and stress responses.This study systematically identified and analyzed PR10 genes in cultivated peanut(Arachis hypogaea L.),examinin...The pathogenesis-related protein PR10 plays a vital role in plant growth,development,and stress responses.This study systematically identified and analyzed PR10 genes in cultivated peanut(Arachis hypogaea L.),examining their phylogenetic relationships,conserved motifs,gene structures,and syntenic relationships.The analysis identified 54 Ah PR10 genes,which were classified into eight groups based on phylogenetic relationships,supported by gene structure and conserved motif characterization.Analysis of chromosomal distribution and synteny demonstrated that segmental duplications played a crucial role in the expansion of the Ah PR10 gene family.The identified Ah PR10 genes exhibited both constitutive and inducible expression patterns.Significantly,Ah PR10-7,Ah PR10-33,and Ah PR10-41 demonstrated potential importance in peanut resistance to Aspergillus flavus.In vitro fungistatic experiments demonstrated that recombinant Ah PR10-33 effectively inhibited A.flavus mycelial growth.These findings provide valuable insights for future investigations into Ah PR10 functions in protecting peanut from A.flavus infection.展开更多
AIM:To summarize publication trends in the field of strabismus over the past 30y and predict future research hotspots.METHODS:A total of 2915 English-language articles and reviews on strabismus,published between 1993 ...AIM:To summarize publication trends in the field of strabismus over the past 30y and predict future research hotspots.METHODS:A total of 2915 English-language articles and reviews on strabismus,published between 1993 and 2022,were retrieved from the Web of Science Core Collection.Bibliometric analyses were performed using VOSviewer and CiteSpace software to explore publication trends,as well as the contributions and collaborative networks of countries/regions,authors,institutions,and journals.RESULTS:The annual number of publications on strabismus showed a consistent upward trend.The United States(USA)maintained a leading position in this research field while Republic of Korea and China emerged as rapidly advancing contributors over the last decade.The University of California,Los Angeles ranked as the most productive institution,and Jonathan M.Holmes from USA was the most productive author.Journal of AAPOS was the leading journal with the most strabismus publications,whereas the two most highly cited articles were both published in Ophthalmology.Co-occurrence analysis identified pivotal keywords and burst terms,including intermittent exotropia(IXT),acute acquired comitant esotropia(AACE),functional magnetic resonance imaging(fMRI),and surgical treatment,which were confirmed as predominant and frontier topics.CONCLUSION:This study provides a comprehensive bibliometric analysis of strabismus research,revealing the evolution of research hotspots over the past 30y and outlining several cutting-edge directions for future investigation.展开更多
Background:Exposure to environmental vulnerability poses significant threats to adolescent suicidal ideation,while individual resilience can mitigate these adverse effects with notable gender commonalities and differe...Background:Exposure to environmental vulnerability poses significant threats to adolescent suicidal ideation,while individual resilience can mitigate these adverse effects with notable gender commonalities and differences.However,research examining how these factors co-configure at the individual level remains limited,particularly from a gender-specific perspective.Thus,the present study aims to adopt a person-centered analytic approach to identify gender-specific configurations of environmental vulnerability and individual resilience associated with suicidal ideation among Chinese adolescents.Methods:Data were collected from 2616 Chinese primary and secondary school students(aged 10–17;1223 girls).Participants completed validated scales measuring environmental vulnerability,individual resilience,and suicidal ideation.Latent profile analysis(LPA)was conducted separately by gender.Results:Gender differences were prominent:males exhibited higher resilience and lower suicidal ideation,while females reported higher environmental vulnerability and elevated levels of suicidal ideation.LPA identified three distinct profiles for males:Low Vulnerable–High Protective–Low Risk(LHL),Medium Vulnerable–Low Protective–Low Risk(MLL),and High Vulnerable–Low Protective–High Risk(HLH).Four profiles emerged for females:LHL,MLL,Medium Vulnerable–Low Protective–Medium Risk(MLM),and HLH.Crucially,within the HLH profile,males exhibited particularly deficient humor(η^(2)=0.19)and confidence(η^(2)=0.16),while females formed a distinct subgroup characterized by severe academic and family stressors(η^(2)=0.30–0.36).Conclusion:The study underscores developing gender-specific mental health interventions using a nuanced,person-centered approach that considers both environmental risk and individual resilience factors,which allows for targeted suicide prevention strategies addressing the unique needs of male and female adolescents.展开更多
Underground hydrogen storage has gained interest in recent years due to the enormous demand for clean energy.Hydrogen is more diffusive than air,with a smaller density and lower viscosity.These unique properties intro...Underground hydrogen storage has gained interest in recent years due to the enormous demand for clean energy.Hydrogen is more diffusive than air,with a smaller density and lower viscosity.These unique properties introduce distinctive hydrodynamic phenomena in hydrogen storage,one of which is fingering.Fingering could induce the fluid trapped in small clusters of pores,leading to a dramatic decrease in hydrogen saturation and a lower recovery rate.In this study,numerical simulations are performed at the microscopic scale to understand the evolution of hydrogen saturation and the impacts of injection and withdrawal cycles.Two sets of micromodels with different porosity(0.362 and 0.426)and minimum sizes of pore throats(0.362 mm and 0.181 mm)are developed in the numerical model.A parameter analysis is then conducted to understand the influence of injection velocity(in the range of 10^(-2)m/s to 10^(-5)m/s)and porous structure on the fingering pattern,followed by an image analysis to capture the evolution of the fingering pattern.Viscous fingering,capillary fingering,and crossover fingering are observed and identified under different boundary conditions.The fractal dimension,specific area,mean angle,and entropy of fingers are proposed as geometric descriptors to characterize the shape of the fingering pattern.When porosity increases from 0.362 to 0.426,the saturation of hydrogen increases by 26.2%.Narrower pore throats elevate capillary resistance,which hinders fluid invasion.These results underscore the importance of pore structures and the interaction between viscous and capillary forces for hydrogen recovery efficiency.This work illuminates the influence of the pore structures and the fluid properties on the immiscible displacement of hydrogen and can be further extended to optimize the injection strategy of hydrogen in underground hydrogen storage.展开更多
Operating Lithium-ion batteries at their temperature limits is a challenging design task due to explosion risk at high temperatures and rapid degradation at low temperatures.Depending on the battery package design,tho...Operating Lithium-ion batteries at their temperature limits is a challenging design task due to explosion risk at high temperatures and rapid degradation at low temperatures.Depending on the battery package design,those risks can be solved with passive solutions,which require no active cooling or heating.Thecurrentwork aims to optimize the pack design and materials of the type-NCR18650B battery based on a wide range of operation temperature.The lower limit was denoted by cold case while the maximum limit was expressed by hot case.A combined analyticalnumerical approach was developed to model the heat generation inside the battery.A thermal resistance analysis was used to determine the boundary conditions of the numerical model.The governing differential equations for the 1-D heat generation model were solved analytically.The numerical analysis was considered to determine the best battery pack design based on material parameters,number of batteries,and geometrical arrangement.The analytical results revealedthat the cold case canbe selectedas theworst case and thebestmodel wasobtainedusing thehexagonal-shaped 10-battery pack that was covered with Delrin of 1.8 mm in thickness.The numerical results showed that the best model was the hexagonal-shaped 10-battery pack with Delrin of 2 mm in thickness that achieved the largest temperature of−20.6℃ in the cold case.展开更多
Thin-film structures are widely used in industry due to their advantages in lightweight,flexibility and deployability.This paper investigates the wrinkling deformation pattern of square film subjected to in-plane tors...Thin-film structures are widely used in industry due to their advantages in lightweight,flexibility and deployability.This paper investigates the wrinkling deformation pattern of square film subjected to in-plane torsion through the post-buckling theory of shell,with the geometric nonlinear behavior derived by energy principle and analyzed with finite element method.An equal-sized experimental verification platform is designed and fabricated,and the wrinkling surface of polyimide film driven by rotary motor is reconstructed by 3D-digital image correlation measurement and verified with finite element simulation comparisons.Wrinkling region within the film expands continuously as the torsion proceeds,accompanied by multiple wrinkling configuration transitions throughout the complete evolutionary process.Due to the non-axial symmetry between structure and loading,significant discrepancies arise in amplitude,span and wavelength between different stripes,effects of thickness,torsion radius and pre-stretch on wrinkling pattern configuration are further discussed.This study can provide valuable references for understanding the wrinkling mechanism of hard film under complex torsion loading.展开更多
Crassostrea gigas has good taste and high nutritional value;however,there are few assessments of comprehensive and panoramic analyses of the nutritional quality of the northern oyster.To study the nutritional characte...Crassostrea gigas has good taste and high nutritional value;however,there are few assessments of comprehensive and panoramic analyses of the nutritional quality of the northern oyster.To study the nutritional characteristics of C.gigas from different sources(ploidy,region,size,and culture mode),C.gigas from various ploidy(diploid and triploid),regions(Rushan,Off-site fattening,and Rongcheng),sizes(small,medium,and large)and culture modes(nearshore and offshore)were selected for comparative analyses.The nutritional components(moisture,protein,fat,and mineral),flavor substances(taste amino acids,nucleotides,and succinic acid),and functional indices(eicosapentaenoic acid(EPA),docosahexaenoic acid(DHA),and taurine)of C.gigas were determined.Principal component analysis(PCA)was used to comprehensively evaluate the oysters and investigate the variations in nutritional quality.The PCA results indicate that protein,essential fatty acids,selenium,zinc,taste amino acids,taurine,EPA,and DHA were core components contributing to 82.25%of the cumulative variance,providing a more comprehensive reflection of the nutrient composition of C.gigas.The extensive quality rankings for the C.gigas were as follows:diploid>triploid,Rushan>fattening>Rongcheng,medium>large>small,and offshore>nearshore.The score rank revealed that diploid oysters of medium-size from Rushan demonstrated superior nutritional quality compared to other tested samples.This is the first comprehensive and systematic investigation of C.gigas in northern China to reveal the feature of nutrients,flavor,and functional components.The study provided data support for the culture,consumption,processing,research,and nutritional quality improvement of oyster industry.展开更多
As a controllable power generation method requiring no energy storage,Ocean Thermal Energy Conversion(OTEC)technology demonstrates characteristics of abundant reserves,low pollution,and round-the-clock stable operatio...As a controllable power generation method requiring no energy storage,Ocean Thermal Energy Conversion(OTEC)technology demonstrates characteristics of abundant reserves,low pollution,and round-the-clock stable operation.The free-standing cold-water pipe(CWP)in the system withstands various complex loads during operation,posing potential failure risks.To reveal the deformation and stress mechanisms of OTEC CWPs,this study first analyzes wave particle velocity and acceleration to determine wave loads at different water depths.Based on the Euler-Bernoulli beam model,a quasi-static load calculation model for OTEC CWPs was established.The governing equations were discretized using the finite difference method,and matrix equations were solved to analyze bending deformation,bending moments,and surface stresses at discrete points along the pipe.Results indicate that water depths within 50 m represent a critical zone where wave particle velocity,acceleration,and wave loads exhibit significant variations in harmonic patterns,while beyond 50 m depth wave loads decrease linearly.Ocean currents and surface wind-driven currents substantially influence the CWP’s lateral displacement.Considering the effect of clump weights,the maximum lateral displacement occurs at 600–800 m below sea level.Utilizing large-wall-thickness high-strength pipes at the top section significantly enhances the structural safety of the CWP system.展开更多
This study investigates in-station pressure drop mechanisms in a shale gas gathering system,providing a quantitative basis for flow system optimization.Computational fluid dynamics(CFD)simulations,based on field-measu...This study investigates in-station pressure drop mechanisms in a shale gas gathering system,providing a quantitative basis for flow system optimization.Computational fluid dynamics(CFD)simulations,based on field-measured parameters related to a representative case(a shale gas platform located in Sichuan,China)are conducted to analyze the flow characteristics of specific fittings and manifolds,and to quantify fitting resistance coefficients and manifold inlet interference.The resulting coefficients are integrated into a full-station gathering network model in PipeSim,which,combined with production data,enables evaluation of pressure losses and identification of equivalent pipeline blockages.The results indicate that the resistance coefficients,valid only for fittings under the studied field-specific geometries,are 0.21 for 90◦elbows in the fully open position,0.16 for gate valve passages in the fully open position,and 2.3 for globe valve passages.Manifold interference decreases with lower high-pressure inlet values,whereas inlets farther from the high-pressure side experience stronger disturbances.Interestingly,significant discrepancies between simulated and measured pressure drops reveal partial blockages,corresponding to effective diameter reductions of 65 mm,38 mm,44 mm,38 mm,and 28 mm for Wells 1#,3#,5#,and 6#,respectively.展开更多
文摘[Objective]This study aims to investigate the multi-body hydrodynamic interaction mechanisms during offshore lifting operations of aquaculture net cages in wind-fishery integration systems.By integrating numerical simulations and dynamic analysis methods,this study systematically investigates the coupled dynamic response characteristics during the cage-carrier vessel separation process to reveal its dynamic evolution patterns and key influence mechanisms.[Method]Based on potential flow theory,a fully coupled dynamic analysis model of crane vessel-net cage-semi-submersible barge was established for a marine ranch project in Guangdong.The complete lifting process was dynamically simulated using SESAM software.Five typical operating sea states were configured to investigate the influence of wave parameters on the system's motion response under combined wave-current-wind actions.[Result]The results demonstrate that wave period dominates the system stability.Under short-period conditions,the system maintains stable motion with relatively small horizontal relative displacements,while long-period conditions excite low-frequency resonance,leading to significant slow-drift motions.Vertical response analysis reveals that long-period waves cause severe relative displacement fluctuations between the cage and semi-submersible vessel,with actual displacement amplitudes doubling the preset safety target of 2.045 m.Quantitative analysis further indicates that when significant wave height increases from 1.0 m to 1.5 m,the actual displacement amplitude increases by approximately 20%relative to the target displacement of 2.045 m,demonstrating that its influence is significantly weaker than the displacement variations induced by wave period changes.The complete dynamic simulation successfully captures the continuous dynamic response characteristics during the lifting process.[Conclusion]This research clarifies the influence mechanisms of wave parameters on the cage lifting process,identifying wave period as the crucial factor for operational safety.An operation window assessment method incorporating multi-body coupling effects is established,proposing a safety criterion with peak period not exceeding six seconds as the core requirement.The findings provide theoretical foundation for safe installation of marine ranch net cages and offer valuable references for similar offshore lifting operations.
基金supported by grants from the Tianjin Health Technology Project(Grant no.2022QN106).
文摘Background:Receptor-interacting protein kinases(RIPKs)regulate cell death,inflammation,and immune responses,yet their roles in cancer are not fully understood.This study investigates the expression,genomic alterations,and functional implications of RIPK family members across various cancers.Methods:We collected multi-omics data from The Cancer Genome Atlas and other public databases,including gene expression,copy number variation(CNV),mutation,methylation,tumor mutation burden(TMB),and microsatellite instability(MSI).Differential expression and survival analyses were performed using DESeq2 and Cox proportional hazards models.CNV and mutation data were analyzed with GISTIC2 and Mutect2,and methylation data with the ChAMP package.Correlations with TMB and MSI were assessed using Pearson coefficients,and gene set enrichment analysis was conducted with the MSigDB Hallmark gene sets.Results:RIPK family members show significant differential expression in various cancers,with RIPK1 and RIPK4 frequently altered.Survival analysis reveals heterogeneous impacts on overall survival.CNV and mutation analyses identify high alteration frequencies for RIPK2 and RIPK7,affecting gene expression.RIPK1 and RIPK7 are hypermethylated in several cancers,inversely correlating with RIPK3 expression.RIPK1,RIPK2,RIPK5,RIPK6,and RIPK7 correlate positively with TMB,while RIPK3 shows negative correlations in some cancers.MSI analysis indicates associations with DNA mismatch repair.G ene set enrichment analysis highlights immune-related pathway enrichment for RIPK1,RIPK2,RIPK3,and RIPK6,and cell proliferation and DNA repair pathways for RIPK4 and RIPK5.RIPK family members showed heterogeneous alterations across cancers:for example,RIPK7 was mutated in up to~15%of u terine c orpus e ndometrial c arcinoma and l ung s quamous c ell c arcinoma cases,and RIPK1 and RIPK7 exhibited frequent promoter hypermethylation in multiple tumor types.Several genes displayed context-dependent associations with overall survival and with TMB/MSI.Conclusion:This pan-cancer analysis of the RIPK family reveals their diverse roles and potential as biomarkers and therapeutic targets.The findings emphasize the importance of RIPK genes in tumorigenesis and suggest context-dependent functions across cancer types.Further studies are needed to explore their mechanisms in cancer development and clinical applications.
基金financially supported by the National Natural Science Foundation of China(Nos.52034002 and U2202254)the Fundamental Research Funds for the Central Universities,China(No.FRF-TT-19-001)。
文摘The sulfation and decomposition process has proven effective in selectively extracting lithium from lepidolite.It is essential to clarify the thermochemical behavior and kinetic parameters of decomposition reactions.Accordingly,comprehensive kinetic study by employing thermalgravimetric analysis at various heating rates was presented in this paper.Two main weight loss regions were observed during heating.The initial region corresponded to the dehydration of crystal water,whereas the subsequent region with overlapping peaks involved complex decomposition reactions.The overlapping peaks were separated into two individual reaction peaks and the activation energy of each peak was calculated using isoconversional kinetics methods.The activation energy of peak 1 exhibited a continual increase as the reaction conversion progressed,while that of peak 2 steadily decreased.The optimal kinetic models,identified as belonging to the random nucleation and subsequent growth category,provided valuable insights into the mechanism of the decomposition reactions.Furthermore,the adjustment factor was introduced to reconstruct the kinetic mechanism models,and the reconstructed models described the kinetic mechanism model more accurately for the decomposition reactions.This study enhanced the understanding of the thermochemical behavior and kinetic parameters of the lepidolite sulfation product decomposition reactions,further providing theoretical basis for promoting the selective extraction of lithium.
基金Supported by the National Natural Science Foundation of China(No.82074500)Beijing Natural Science Foundation(No.7252273)+2 种基金CACMS Innovation Fund(No.CI2021A02605)Administration of Traditional Chinese Medicine of Zhejiang Province(No.2024ZR029)Science and Technology Program of Wenzhou City(No.Y2023210).
文摘AIM:To perform a bibliometric analysis of publications focusing on inflammatory mechanisms in glaucoma,thereby comprehensively understanding the current research status and identifying potential frontier directions for future studies.METHODS:A systematic search was conducted in the Web of Science Core Collection(WoSCC)database to retrieve relevant literature published from January 1,2000,to August 31,2025(data accessed on September 12,2025).Multiple data visualization tools were employed to conduct in-depth analyses of the included publications,covering aspects such as publication quantity and quality,evolutionary trends of research hotspots,keyword cooccurrence networks,and collaborative patterns among countries/regions,institutions,and authors.RESULTS:A total of 3381 articles related to glaucoma inflammation were extracted from WoSCC.The analysis showed that the USA had the highest research output in this field(29.04%,n=982),followed by China(18.40%,n=622)and UK(6.01%,n=203).Based on citation frequency and burst intensity,the USA also ranked as the most influential country.Baudouin C and Sun X were identified as the most productive authors,while Journal of Glaucoma and Investigative Ophthalmology&Visual Science were the journals with the highest number of published relevant articles.Additionally,keyword analysis revealed that“neuroinflammation”,“retinal ganglion cells(RGCs)”,“pathophysiology”,and“traditional Chinese medicine”are emerging research hotspots in the field of immuneinflammatory responses in glaucoma.CONCLUSION:This study presents a comprehensive bibliometric overview of research on glaucoma-related inflammation,indicating that this field has received extensive scientific attention with a steady upward trend in research activity.Furthermore,it establishes a theoretical basis for the development of neuroinflammation-targeted therapeutic strategies for glaucoma and emphasizes the necessity of strengthening interdisciplinary collaboration to promote the clinical translation of research findings.
文摘This study investigates the uncertain dynamic characterization of hybrid composite plates by employing advanced machine-assisted finite element methodologies.Hybrid composites,widely used in aerospace,automotive,and structural applications,often face variability in material properties,geometric configurations,and manufacturing processes,leading to uncertainty in their dynamic response.To address this,three surrogate-based machine learning approaches like radial basis function(RBF),multivariate adaptive regression splines(MARS),and polynomial neural networks(PNN)are integrated with a finite element framework to efficiently capture the stochastic behavior of these plates.The research focuses on predicting the first three natural frequencies under material uncertainties,which are critical to ensuring structural reliability.Monte Carlo simulation(MCS)is used as a benchmark for generating probabilistic datasets,including mean values,standard deviations,and probability density functions.The surrogate models are then trained and validated against these datasets,enabling accurate representation of uncertainty with substantially fewer samples compared to conventionalMCS.Among the methods studied,the RBFmodel demonstrates superior performance,closely approximating MCS results with a reduced sample size,thereby achieving significant computational savings.The proposed framework not only reduces computational time and costs but also maintains high predictive accuracy,making it well-suited for complex engineering systems.Beyond free vibration analysis,the methodology can be extended to more sophisticated scenarios,such as forced vibration,damping effects,and nonlinear structural responses.Overall,this work presents a computationally efficient and robust approach for surrogate-based uncertainty quantification,advancing the analysis and design of hybrid composite structures under uncertainty.
基金supported by the Chongqing Water Conservancy Science and Technology Project(grant number:CQSLK-202329)the Natural Science Foundation of Chongqing,China(grant number:CSTB2022NSCQ-MSX0991)+1 种基金the National Natural Science Foundation of China(grant number:52378327)the Chongqing Natural Science Foundation Innovation Development Joint Fund(grant number:CSTB2022NSCQ-LZX0049)。
文摘Rock slope instability is a prevalent geological hazard that imposes significant adverse impacts on engineering activities.Although existing studies have focused on homogeneous rock slopes,the theoretical models for quantifying the stability of softhard interbedded anti-inclined slopes remain underdeveloped,primarily due to the complex force transfer mechanisms involved.This study proposed a novel theoretical model for the stability analysis of soft-hard interbedded anti-inclined slopes under rainfall conditions.The framework models stratified rock layers as layered cantilever beams with material heterogeneity.Based on the principle of deformation compatibility,it comprehensively accounted for interlayer force transfer and strength degradation resulting from differential deformations among rock layers.Furthermore,it integrated the critical instability length induced by the self-weight of rock layers to determine the fracture depth.The proposed method was validated against engineering case studies and physical model tests,with error falling within an acceptable range.Compared to existing theoretical methods,the proposed method provided a more realistic representation of the slope's stress field.The analysis results demonstrate that rainfall not only reduces the inclination angle of the failure surface but also leads to an approximate 30%decrease in the safety factor.The proposed theoretical model is particularly useful for quickly calculating the stability of soft-hard interbedded anti-inclined rock slope under rainfall conditions,compared to complex and time-consuming numerical simulation calculations.
文摘In this work,a computational modelling and analysis framework is developed to investigate the thermal buckling behavior of doubly-curved composite shells reinforced with graphene-origami(G-Ori)auxetic metamaterials.A semi-analytical formulation based on the First-Order Shear Deformation Theory(FSDT)and the principle of virtual displacements is established,and closed-form solutions are derived via Navier’s method for simply supported boundary conditions.The G-Ori metamaterial reinforcements are treated as programmable constructs whose effective thermo-mechanical properties are obtained via micromechanical homogenization and incorporated into the shell model.A comprehensive parametric study examines the influence of folding geometry,dispersion arrangement,reinforcement weight fraction,curvature parameters,and elastic foundation support on the critical buckling temperature(CBT).The results reveal that,under optimal folding geometry and reinforcement alignment with principal stress trajectories,the CBT can increase by more than 150%.Furthermore,the combined effect of G-Ori reinforcement and elastic foundation substantially enhances thermal buckling resistance.These findings establish design guidelines for architected composite shells in applications such as aerospace thermal skins,morphing structures,and thermally-responsive systems,and illustrate the potential of auxetic graphene metamaterials for multifunctional,lightweight,and thermally robust structural components.
基金funding from the China National Key Research and Development Program(No.2023YFC3603104)the National Natural Science Foundation of China(Nos.82472243 and 82272180)+6 种基金the Fundamental Research Funds for the Central Universities(No.226-2025-00024)the Huadong Medicine Joint Funds of the Zhejiang Provincial Natural Science Foundation of China(No.LHDMD24H150001)the Key Research&Development Project of Zhejiang Province(No.2024C03240)a collaborative scientific project co-established by the Science and Technology Department of the National Administration of Traditional Chinese Medicine and the Zhejiang Provincial Administration of Traditional Chinese Medicine(No.GZY-ZJ-KJ-24082)he General Health Science and Technology Program of Zhejiang Province(No.2024KY1099)the Project of Zhejiang University Longquan Innovation Center(No.ZJDXLQCXZCJBGS2024016)Wu Jieping Medical Foundation Special Research Grant(No.320.6750.2024-23-07).
文摘Objective:Sepsis exhibits remarkable heterogeneity in disease progression trajectories,and accurate identificationof distinct trajectory-based phenotypes is critical for implementing personalized therapeutic strategies and prognostic assessment.However,trajectory clustering analysis of time-series clinical data poses substantial methodological challenges for researchers.This study provides a comprehensive tutorial framework demonstrating six trajectory modeling approaches integrated with proteomic analysis to guide researchers in identifying sepsis subtypes after laparoscopic surgery.Methods:This study employs simulated longitudinal data from 300 septic patients after laparoscopic surgery to demonstrate six trajectory modeling methods(group-based trajectory modeling,latent growth mixture modeling,latent transition analysis,time-varying effect modeling,K-means for longitudinal data,agglomerative hierarchical clustering)for identifying associations between predefinedsequential organ failure assessment trajectories and 25 proteomic biomarkers.Clustering performance was evaluated via multiple metrics,and a biomarker discovery pipeline integrating principal component analysis,random forests,feature selection,and receiver operating characteristic analysis was developed.Results:The six methods demonstrated varying performance in identifying trajectory structures,with each approach exhibiting distinct analytical characteristics.The performance metrics revealed differences across methods,which may inform context-specificmethod selection and interpretation strategies.Conclusion:This study illustrates practical implementations of trajectory modeling approaches under controlled conditions,facilitating informed method selection for clinical researchers.The inclusion of complete R code and integrated proteomics workflows offers a reproducible analytical framework connecting temporal pattern recognition to biomarker discovery.Beyond sepsis,this pipeline-oriented approach may be adapted to diverse clinical scenarios requiring longitudinal disease characterization and precision medicine applications.The comparative analysis reveals that each method has distinct strengths,providing a practical guide for clinical researchers in selecting appropriate methods based on their specificstudy goals and data characteristics.
基金funded by the Ministry of Higher Education through Universiti Putra Malaysia(UPM)under Grant FRGS/1/2023/STG07/UPM/02/4.
文摘Detecting geomagnetic anomalies preceding earthquakes is a challenging yet promising area of research that has gained increasing attention in recent years.This study introduces a novel reconstruction-based modeling approach enhanced by negative learning,employing a Bidirectional Long Short-Term Memory(BiLSTM)network explicitly trained to accurately reconstruct non-seismic geomagnetic signals while intentionally amplifying reconstruction errors for seismic signals.By penalizing the model for accurately reconstructing seismic anomalies,the negative learning approach effectively magnifies the differences between normal and anomalous data.This strategic differentiation enhances the sensitivity of the BiLSTM network,enabling improved detection of subtle geomagnetic anomalies that may serve as earthquake precursors.Experimental validation clearly demonstrated statistically significant higher reconstruction errors for seismic signals compared to non-seismic signals,confirmed through the Mann-Whitney U test with a p-value of 0.0035 for Root Mean Square Error(RMSE).These results provide compelling evidence of the enhanced anomaly detection capability achieved through negative learning.Unlike traditional classification-based methods,negative learning explicitly encourages sensitivity to subtle precursor signals embedded within complex geomagnetic data,establishing a robust basis for further development of reliable earthquake prediction methods.
基金supported by the Major Program of National Natural Science Foundation of China(Grant No.42090055)the National Key ScientificInstruments and Equipment Development Projects of China(Grant No.41827808)the National Nature Science Foundation of China(Grant No.42207216).
文摘Reservoir-induced landslides in China's Three Gorges Reservoir area are prone to tensile cracks due to the influenceof their own weight and fluctuationsin water levels.The presence of cracks indicates that the tensile stress in the area has exceeded the tensile strength of the soil,leading to local instability.To explore the impact of tensile failure behavior on the stability and failure modes of reservoir landslides,the Huangtupo Riverside Slump#1 is taken as a case study.By considering local tensile failure,potential tensile cracks are incorporated into the analysis via the limit equilibrium method and reliability theory.The reliability of landslides under different tensile failure scenarios is quantified.Strain-softening characteristics of the soil are combined to further analyze the failure transmission path of the landslide.Finally,these potential failure modes were validated through physical model tests.The results show that cracks developing at rear positions reduce the stability of the slope and increase the probability of instability.During the destruction process,retrogressive failures with multiple sliding surfaces are likely to occur.However,tensile failure at the forefront reduces the likelihood of an individual slide mass descending.Progressive failure results in both regular and skip transmission patterns.Additionally,cracks and water level changes can also lead to shifts in the positions of the most dangerous blocks.Therefore,in practical landslide analysis and prevention,it is necessary to consider local tensile damage and identify potential tensile crack locations in advance to optimize prevention measures and accurately evaluate landslide risk.
基金supported by the Anhui Philosophical and Social Science Fund for University Research:The Application of Painting Psychological Analysis in College Students’Mental Health Education Courses(Grant#:2023AH052874),which has provided essential financial support for data collection.
文摘This study explores the core characteristics,dynamic progression of the depression-anxiety-stress network among Chinese higher vocational college freshmen and its association with life satisfaction,and identifies key nodes and critical intervention points.Participants were 295 higher vocational college freshmen(male=137;M=18.52,SD=0.69)completing two follow-up surveys(5-month interval).Measures included depression-anxiety-stress symptoms and life satisfaction,analyzed via cross-sectional and binary cross-lagged panel network analysis.The results showed that“Easily agitated”was the central node(strength=1.519,EI=1.967);“Irritable”and“Mouth Dryness”were top predictors(Out-EI=1.101,1.100),with depressive symptoms as the convergence hub.“Easily agitated”had the strongest direct negative impact on life satisfaction(cross-cluster out-predictability=−0.653).This study elucidates depression-anxietystress network mechanisms in higher vocational freshmen,providing a theoretical framework and targeted intervention guidance(e.g.,focusing on somatic and emotional nodes).
基金supported by the National Key R&D Program of China(2022YFD1200400)the National Natural Science Foundation of China(32301851)。
文摘The pathogenesis-related protein PR10 plays a vital role in plant growth,development,and stress responses.This study systematically identified and analyzed PR10 genes in cultivated peanut(Arachis hypogaea L.),examining their phylogenetic relationships,conserved motifs,gene structures,and syntenic relationships.The analysis identified 54 Ah PR10 genes,which were classified into eight groups based on phylogenetic relationships,supported by gene structure and conserved motif characterization.Analysis of chromosomal distribution and synteny demonstrated that segmental duplications played a crucial role in the expansion of the Ah PR10 gene family.The identified Ah PR10 genes exhibited both constitutive and inducible expression patterns.Significantly,Ah PR10-7,Ah PR10-33,and Ah PR10-41 demonstrated potential importance in peanut resistance to Aspergillus flavus.In vitro fungistatic experiments demonstrated that recombinant Ah PR10-33 effectively inhibited A.flavus mycelial growth.These findings provide valuable insights for future investigations into Ah PR10 functions in protecting peanut from A.flavus infection.
基金Supported by National Natural Science Foundation of China(No.82020108006,No.81730025).
文摘AIM:To summarize publication trends in the field of strabismus over the past 30y and predict future research hotspots.METHODS:A total of 2915 English-language articles and reviews on strabismus,published between 1993 and 2022,were retrieved from the Web of Science Core Collection.Bibliometric analyses were performed using VOSviewer and CiteSpace software to explore publication trends,as well as the contributions and collaborative networks of countries/regions,authors,institutions,and journals.RESULTS:The annual number of publications on strabismus showed a consistent upward trend.The United States(USA)maintained a leading position in this research field while Republic of Korea and China emerged as rapidly advancing contributors over the last decade.The University of California,Los Angeles ranked as the most productive institution,and Jonathan M.Holmes from USA was the most productive author.Journal of AAPOS was the leading journal with the most strabismus publications,whereas the two most highly cited articles were both published in Ophthalmology.Co-occurrence analysis identified pivotal keywords and burst terms,including intermittent exotropia(IXT),acute acquired comitant esotropia(AACE),functional magnetic resonance imaging(fMRI),and surgical treatment,which were confirmed as predominant and frontier topics.CONCLUSION:This study provides a comprehensive bibliometric analysis of strabismus research,revealing the evolution of research hotspots over the past 30y and outlining several cutting-edge directions for future investigation.
基金supported by the Major Planning Project of Philosophy and Social Science of Guangdong Province(GD23ZD17)the Humanities and Social Sciences Program of the Ministry of Education(23YJA190006)+3 种基金the Ministry of Education(MOE)Major Project of Philosophy and Social Sciences Research(2025JZDZ024)the MOE Project of the Key Research Institute of Humanities and Social Sciences in Universities(22JJD190008)a grant from the Research Center for Brain Cognition and Human Development of Guangdong(2024B0303390003)the Psychological Services and Counseling Base for the Happy Guangzhou Project.
文摘Background:Exposure to environmental vulnerability poses significant threats to adolescent suicidal ideation,while individual resilience can mitigate these adverse effects with notable gender commonalities and differences.However,research examining how these factors co-configure at the individual level remains limited,particularly from a gender-specific perspective.Thus,the present study aims to adopt a person-centered analytic approach to identify gender-specific configurations of environmental vulnerability and individual resilience associated with suicidal ideation among Chinese adolescents.Methods:Data were collected from 2616 Chinese primary and secondary school students(aged 10–17;1223 girls).Participants completed validated scales measuring environmental vulnerability,individual resilience,and suicidal ideation.Latent profile analysis(LPA)was conducted separately by gender.Results:Gender differences were prominent:males exhibited higher resilience and lower suicidal ideation,while females reported higher environmental vulnerability and elevated levels of suicidal ideation.LPA identified three distinct profiles for males:Low Vulnerable–High Protective–Low Risk(LHL),Medium Vulnerable–Low Protective–Low Risk(MLL),and High Vulnerable–Low Protective–High Risk(HLH).Four profiles emerged for females:LHL,MLL,Medium Vulnerable–Low Protective–Medium Risk(MLM),and HLH.Crucially,within the HLH profile,males exhibited particularly deficient humor(η^(2)=0.19)and confidence(η^(2)=0.16),while females formed a distinct subgroup characterized by severe academic and family stressors(η^(2)=0.30–0.36).Conclusion:The study underscores developing gender-specific mental health interventions using a nuanced,person-centered approach that considers both environmental risk and individual resilience factors,which allows for targeted suicide prevention strategies addressing the unique needs of male and female adolescents.
基金supported by the National Key Research and Development Project(Grant No.2023YFE0110900)the National Natural Science Foundation of China(Grant Nos.42320104003,42477168).
文摘Underground hydrogen storage has gained interest in recent years due to the enormous demand for clean energy.Hydrogen is more diffusive than air,with a smaller density and lower viscosity.These unique properties introduce distinctive hydrodynamic phenomena in hydrogen storage,one of which is fingering.Fingering could induce the fluid trapped in small clusters of pores,leading to a dramatic decrease in hydrogen saturation and a lower recovery rate.In this study,numerical simulations are performed at the microscopic scale to understand the evolution of hydrogen saturation and the impacts of injection and withdrawal cycles.Two sets of micromodels with different porosity(0.362 and 0.426)and minimum sizes of pore throats(0.362 mm and 0.181 mm)are developed in the numerical model.A parameter analysis is then conducted to understand the influence of injection velocity(in the range of 10^(-2)m/s to 10^(-5)m/s)and porous structure on the fingering pattern,followed by an image analysis to capture the evolution of the fingering pattern.Viscous fingering,capillary fingering,and crossover fingering are observed and identified under different boundary conditions.The fractal dimension,specific area,mean angle,and entropy of fingers are proposed as geometric descriptors to characterize the shape of the fingering pattern.When porosity increases from 0.362 to 0.426,the saturation of hydrogen increases by 26.2%.Narrower pore throats elevate capillary resistance,which hinders fluid invasion.These results underscore the importance of pore structures and the interaction between viscous and capillary forces for hydrogen recovery efficiency.This work illuminates the influence of the pore structures and the fluid properties on the immiscible displacement of hydrogen and can be further extended to optimize the injection strategy of hydrogen in underground hydrogen storage.
文摘Operating Lithium-ion batteries at their temperature limits is a challenging design task due to explosion risk at high temperatures and rapid degradation at low temperatures.Depending on the battery package design,those risks can be solved with passive solutions,which require no active cooling or heating.Thecurrentwork aims to optimize the pack design and materials of the type-NCR18650B battery based on a wide range of operation temperature.The lower limit was denoted by cold case while the maximum limit was expressed by hot case.A combined analyticalnumerical approach was developed to model the heat generation inside the battery.A thermal resistance analysis was used to determine the boundary conditions of the numerical model.The governing differential equations for the 1-D heat generation model were solved analytically.The numerical analysis was considered to determine the best battery pack design based on material parameters,number of batteries,and geometrical arrangement.The analytical results revealedthat the cold case canbe selectedas theworst case and thebestmodel wasobtainedusing thehexagonal-shaped 10-battery pack that was covered with Delrin of 1.8 mm in thickness.The numerical results showed that the best model was the hexagonal-shaped 10-battery pack with Delrin of 2 mm in thickness that achieved the largest temperature of−20.6℃ in the cold case.
基金supported by the National Natural Science Foundation of China(Grant No.12472347).
文摘Thin-film structures are widely used in industry due to their advantages in lightweight,flexibility and deployability.This paper investigates the wrinkling deformation pattern of square film subjected to in-plane torsion through the post-buckling theory of shell,with the geometric nonlinear behavior derived by energy principle and analyzed with finite element method.An equal-sized experimental verification platform is designed and fabricated,and the wrinkling surface of polyimide film driven by rotary motor is reconstructed by 3D-digital image correlation measurement and verified with finite element simulation comparisons.Wrinkling region within the film expands continuously as the torsion proceeds,accompanied by multiple wrinkling configuration transitions throughout the complete evolutionary process.Due to the non-axial symmetry between structure and loading,significant discrepancies arise in amplitude,span and wavelength between different stripes,effects of thickness,torsion radius and pre-stretch on wrinkling pattern configuration are further discussed.This study can provide valuable references for understanding the wrinkling mechanism of hard film under complex torsion loading.
基金Supported by the Central Public-interest Scientific Institution Basal Research Fund,YSFRI,CAFS(No.20603022024016)the Central Public-interest Scientific Institution Basal Research Fund,CAFS(Nos.2023TD52,2023TD76)the earmarked fund for CARS(No.CARS-49)。
文摘Crassostrea gigas has good taste and high nutritional value;however,there are few assessments of comprehensive and panoramic analyses of the nutritional quality of the northern oyster.To study the nutritional characteristics of C.gigas from different sources(ploidy,region,size,and culture mode),C.gigas from various ploidy(diploid and triploid),regions(Rushan,Off-site fattening,and Rongcheng),sizes(small,medium,and large)and culture modes(nearshore and offshore)were selected for comparative analyses.The nutritional components(moisture,protein,fat,and mineral),flavor substances(taste amino acids,nucleotides,and succinic acid),and functional indices(eicosapentaenoic acid(EPA),docosahexaenoic acid(DHA),and taurine)of C.gigas were determined.Principal component analysis(PCA)was used to comprehensively evaluate the oysters and investigate the variations in nutritional quality.The PCA results indicate that protein,essential fatty acids,selenium,zinc,taste amino acids,taurine,EPA,and DHA were core components contributing to 82.25%of the cumulative variance,providing a more comprehensive reflection of the nutrient composition of C.gigas.The extensive quality rankings for the C.gigas were as follows:diploid>triploid,Rushan>fattening>Rongcheng,medium>large>small,and offshore>nearshore.The score rank revealed that diploid oysters of medium-size from Rushan demonstrated superior nutritional quality compared to other tested samples.This is the first comprehensive and systematic investigation of C.gigas in northern China to reveal the feature of nutrients,flavor,and functional components.The study provided data support for the culture,consumption,processing,research,and nutritional quality improvement of oyster industry.
基金funded by Nansha District Science and Technology Project(Grant Number.2024ZD008)funded by China Geological Survey(Grant number:No.DD20230066,DD20242659).
文摘As a controllable power generation method requiring no energy storage,Ocean Thermal Energy Conversion(OTEC)technology demonstrates characteristics of abundant reserves,low pollution,and round-the-clock stable operation.The free-standing cold-water pipe(CWP)in the system withstands various complex loads during operation,posing potential failure risks.To reveal the deformation and stress mechanisms of OTEC CWPs,this study first analyzes wave particle velocity and acceleration to determine wave loads at different water depths.Based on the Euler-Bernoulli beam model,a quasi-static load calculation model for OTEC CWPs was established.The governing equations were discretized using the finite difference method,and matrix equations were solved to analyze bending deformation,bending moments,and surface stresses at discrete points along the pipe.Results indicate that water depths within 50 m represent a critical zone where wave particle velocity,acceleration,and wave loads exhibit significant variations in harmonic patterns,while beyond 50 m depth wave loads decrease linearly.Ocean currents and surface wind-driven currents substantially influence the CWP’s lateral displacement.Considering the effect of clump weights,the maximum lateral displacement occurs at 600–800 m below sea level.Utilizing large-wall-thickness high-strength pipes at the top section significantly enhances the structural safety of the CWP system.
基金the National Natural Science Foundation of China under Grant 52441411,52325402 and 52274057Deep Earth Probe and Mineral Resources Exploration-National Science and Technology Major Project under Grant 2024ZD1004302-04the National Key R&D Program of China under Grant 2023YFB4104200.
文摘This study investigates in-station pressure drop mechanisms in a shale gas gathering system,providing a quantitative basis for flow system optimization.Computational fluid dynamics(CFD)simulations,based on field-measured parameters related to a representative case(a shale gas platform located in Sichuan,China)are conducted to analyze the flow characteristics of specific fittings and manifolds,and to quantify fitting resistance coefficients and manifold inlet interference.The resulting coefficients are integrated into a full-station gathering network model in PipeSim,which,combined with production data,enables evaluation of pressure losses and identification of equivalent pipeline blockages.The results indicate that the resistance coefficients,valid only for fittings under the studied field-specific geometries,are 0.21 for 90◦elbows in the fully open position,0.16 for gate valve passages in the fully open position,and 2.3 for globe valve passages.Manifold interference decreases with lower high-pressure inlet values,whereas inlets farther from the high-pressure side experience stronger disturbances.Interestingly,significant discrepancies between simulated and measured pressure drops reveal partial blockages,corresponding to effective diameter reductions of 65 mm,38 mm,44 mm,38 mm,and 28 mm for Wells 1#,3#,5#,and 6#,respectively.
