Adsorption by solid amine adsorbent is a promising technology for decarbonization of flue gas.However,adsorption properties of many solid amine adsorbents need to be enhanced,and it is necessary to further study the C...Adsorption by solid amine adsorbent is a promising technology for decarbonization of flue gas.However,adsorption properties of many solid amine adsorbents need to be enhanced,and it is necessary to further study the CO_(2)adsorption mechanism.A novel CO_(2)adsorbent with high capacity was obtained by grafting 3-aminopropyltriethoxysilane(APTES)on a micro-mesoporous composite molecular sieve ZSM-5/MCM-48 as the support,and then impregnated with tetraethylenepentamine(TEPA)or polyethyleneimine(PEI).The maximum adsorption capacity of APTES-ZSM-5/MCM-48-TEPA-60(A-ZM-T60),loaded with 60%(in mass)TEPA,for CO_(2)reaches 5.82 mmol·g^(-1) at 60℃in 15%(in volume)CO_(2).Carbamate,alkyl ammonium carbamate and carbonate are generated during the chemical adsorption,which is dominant for CO_(2)adsorption because of the reaction between CO_(2)and amino groups on the adsorbent,simultaneously accompanied by weak physical adsorption.All above data confirm that these composites display an outstanding adsorption performance with a bright future for CO_(2)capture from flue gas after desulfurization.展开更多
Static adsorption and dynamic damage experiments were carried out on typical 8#deep coal rock of the Carboniferous Benxi Formation in the Ordos Basin,NW China,to evaluate the adsorption capacity of hydroxypropyl guar ...Static adsorption and dynamic damage experiments were carried out on typical 8#deep coal rock of the Carboniferous Benxi Formation in the Ordos Basin,NW China,to evaluate the adsorption capacity of hydroxypropyl guar gum and polyacrylamide as fracturing fluid thickeners on deep coal rock surface and the permeability damage caused by adsorption.The adsorption morphology of the thickener was quantitatively characterized by atomic force microscopy,and the main controlling factors of the thickener adsorption were analyzed.Meanwhile,the adsorption mechanism of the thickener was revealed by Zeta potential,Fourier infrared spectroscopy and X-ray photoelectron spectroscopy.The results show that the adsorption capacity of hydroxypropyl guar gum on deep coal surface is 3.86 mg/g,and the permeability of coal rock after adsorption decreases by 35.24%–37.01%.The adsorption capacity of polyacrylamide is 3.29 mg/g,and the permeability of coal rock after adsorption decreases by 14.31%–21.93%.The thickness of the thickener adsorption layer is positively correlated with the mass fraction of thickener and negatively correlated with temperature,and a decrease in pH will reduce the thickness of the hydroxypropyl guar gum adsorption layer and make the distribution frequency of the thickness of polyacrylamide adsorption layer more concentrated.Functional group condensation and intermolecular force are chemical and physical forces for adsorbing fracturing fluid thickener in deep coal rock.Optimization of thickener mass fraction,chemical modification of thickener molecular,oxidative thermal degradation of polymer and addition of desorption agent can reduce the potential damages on micro-nano pores and cracks in coal rock.展开更多
Metal-Organic Frameworks(MOFs)have emerged as promising materials for gas adsorption and separation due to their exceptional surface area,tunable porosity,and versatility in functionalization.This paper explores the m...Metal-Organic Frameworks(MOFs)have emerged as promising materials for gas adsorption and separation due to their exceptional surface area,tunable porosity,and versatility in functionalization.This paper explores the mechanisms of gas adsorption in MOFs,including physical adsorption,chemisorption,and synergistic effects,which contribute to their efficiency in capturing and separating gases.The applications of MOFs in key areas such as carbon dioxide capture,hydrogen storage,natural gas separation,and air purification are discussed,highlighting their potential to address pressing environmental and energy challenges.Additionally,the use of MOFs in selective gas separation,membranes,and adsorption-based technologies like Pressure Swing Adsorption(PSA)and Vacuum Swing Adsorption(VSA)is explored,emphasizing their advantages over traditional materials.Despite challenges related to scalability,stability,and cost,MOFs hold great promise for advancing gas separation technologies in the near future,offering more efficient,sustainable,and environmentally friendly solutions.展开更多
This study mainly investigates the influence of pore water characteristics on the adsorption properties of coalbed methane through integrated low field nuclear magnetic resonance(LF-NMR),adsorption experiments,and mol...This study mainly investigates the influence of pore water characteristics on the adsorption properties of coalbed methane through integrated low field nuclear magnetic resonance(LF-NMR),adsorption experiments,and molecular dynamics(MD)simulations.Pore water states in three coal ranks were characterized during progressive hydration.Multi-scale analysis revealed how pore water evolution regulates methane adsorption processes.During the diffusion-dominated stage(M2-M3),adsorbed water penetrates into the micropores.In the highly wettable brown coal(L1),the adsorbed water content reaches 2.12 g while in the anthracite(A1),it is only 0.29 g.During the active water injection stage(M4-M6),non-adsorbed water dominates in anthracite(over 85%of the total water content of 4.01 g),while adsorbed water remains dominant in lignite(over 60%of the total water content of 3.52 g).Water content plays a key role in methane adsorption in coal.During the water addition phase,the influence of methane adsorption on medium-to-low-rank coal is relatively weak,while the methane adsorption capacity of high-rank coal A1 shows a significant decrease during both the water diffusion and water addition phases,corresponding to a reduction in Langmuir volume of 21.22 cm^(3)/g.Molecular dynamics(MD)results further show that the free energy between molecules on the surface of hydroxyl-modified coal increases,with hydroxyl groups driving electrostatic interactions between coal and water molecules.Increased steric hindrance inhibits hydrogen bond formation and reduces the rate of hydrogen bond growth.There is a significant correlation between pore water content and coal-water molecular interaction energy,which cross-scale validates the results of LF-NMR testing and MD simulations.展开更多
Increasing attention has been paid to radioactive wastewater to direct discharge in Japan or accidental leaks.Strontium-90(90Sr)and Cobalt-60(^(60)Co)are the most hazardous nuclides in waste discharged form nuclear re...Increasing attention has been paid to radioactive wastewater to direct discharge in Japan or accidental leaks.Strontium-90(90Sr)and Cobalt-60(^(60)Co)are the most hazardous nuclides in waste discharged form nuclear reactors.Because of their high solubility and long half-lives,these radioisotopes can persist for hundreds of years before decaying to negligible levels.Herein,a green and biodegradable material nanoscale zero-valent iron(nZVI)supported by bacterial cellulose particles(BCP-nZVI)is constructed for the first time to adsorb Co^(2+)and Sr^(2+)in single and binary systems.BCP-nZVI shows superior adsorption capacities of Co^(2+)and Sr^(2+)in a single system within a wide range of pH values from 5 to 7,while the coexistence of Co^(2+)adsorption inhibits the Sr^(2+)in binary system.Pseudo-second-order dynamics model and Langmuir isothermal model can be indicated the BCP-nZVI adsorption progress with 107.10 mg/g(Co^(2+))and 64.96 mg/g(Sr^(2+))maximum adsorption capacity.BCP-nZVI has outstanding stability,allowing it to be stored for more than one month with compromising its performance.More importantly,BCP-nZVI exhibits exceptional removal efficiency of Co^(2+)(92.53%)and Sr^(2+)(58.62%)removal in natural seawater systems.The mechanism investigation illustrates the high adsorption capacity of BCP-nZVI for Co^(2+)is controlled by redox and hydroxyl complexation.While Sr^(2+)is controlled by hydroxyl complexed adsorption,thus it has weak against interference by cations like Na^(+),Ca^(2+),etc.BCP-nZVI exhibits the advantages of high adsorption capacity,wide pH range,strong stability,and good applicability in natural seawater,which has excellent potential for application in radioactive ions removal.展开更多
As the fundamental unit of soil,aggregates exhibit significant variations in their abilities to adsorb and desorb trace elements,depending on their size.Batch experiments were conducted to investigate the characterist...As the fundamental unit of soil,aggregates exhibit significant variations in their abilities to adsorb and desorb trace elements,depending on their size.Batch experiments were conducted to investigate the characteristics of adsorption and desorption of cadmium(Cd),copper(Cu),and lead(Pb)on and from soil aggregate fractions from three layers of a calcareous soil profile in Changxing County,Zhejiang Prvince,China.The results showed that both Langmuir and Freundlich models successfully described the isothermal adsorption processes of single Cd,Cu,and Pb on different soil aggregates.Additionally,aggregates from the bottom soil layer showed the highest maximum adsorption capacity and required the lowest energy for Cd,Cu,and Pb adsorption compared to aggregates from upper soil layers.The physicochemical properties of soil aggregates were found to govern the adsorption and desorption processes of heavy metals rather than the aggregate size,wherein the contents of iron/aluminum oxides and organic matter were the most crucial influencing factors.Cadmium displayed higher mobility than Cu and Pb in different soil aggregates,and the maximum adsorption capacities of the metal ions followed the order of Pb>Cu>Cd,while their desorption rates followed the order of Cd>Cu>Pb.Additionally,the<0.053 mm microaggregates presented the lowest desorption rates for Cd,Cu,and Pb compared to other soil aggregate fractions in each soil layer.Furthermore,the orthogonal experiment results demonstrated that the competitive adsorption between metals occurred on soil aggregates in the ternary heavy metal system,but only the desorption of Pb was significantly affected by the coexistence of Cd and Cu.展开更多
Solvation structures fundamentally control the ion-transport dynamics and mechanical properties of polymer electrolytes.However,there is a lack of strategies to rationally regulate the solvation structures and fundame...Solvation structures fundamentally control the ion-transport dynamics and mechanical properties of polymer electrolytes.However,there is a lack of strategies to rationally regulate the solvation structures and fundamental understanding on how they control the electrochemical performances.Herein,by harnessing the electrostatic adsorption of one-dimensional nanofiller(i.e.,surface-charged halloysite nanotubes,d-HNTs),we successfully fabricate a high-performance polymer nanocomposite electrolyte enabled by strong surface adsorption,referred as adsorption-state polymer electrolyte(ASPE).This ASPE shows fast ion transport(0.71±0.05 mS cm^(-1)at room temperature),high mechanical strength and toughness(10.3±0.05 MPa;15.73 MJ m^(-3)),improved lithium-ion transference number,and long cycle life with lithium metal anode,in comparison with the sample without the d-HNT adsorption effect.To fundamentally understand these high performances,an anion-rich asymmetric solvent structure model is further proposed and evidenced by both experiments and simulation studies.Results show that the electrostatic adsorption among the d-HNT,ionic liquid electrolyte,and polymer chain generates a nano filler-supported fast ion-conduction pathway with asymmetric Li+-coordination microenvironment.Meanwhile,the anion-rich asymmetric solvent structure model of ASPE also generates a fast de-solvation and anion-derived stable solid-electrolyte interphase for lithium metal anode.The high performance and understanding of the mechanism for ASPE provide a promising path to develop advanced polymer electrolytes.展开更多
Quantum spin Hall state usually emerges in non-magnetic systems,which are typically incompatible withferromagnetism.Here,we predict that two-dimensional(2D)ferrovalley semiconductor single-layer(SL)2HNbTe_(2)can be tr...Quantum spin Hall state usually emerges in non-magnetic systems,which are typically incompatible withferromagnetism.Here,we predict that two-dimensional(2D)ferrovalley semiconductor single-layer(SL)2HNbTe_(2)can be transformed into a 2D room-temperature quantum spin Hall insulator through hydrogen(H)atom adsorption.The SL 2H-NbTe_(2) is found to possess a giant spontaneous valley polarization of 274 meV,which is much larger than those of most available ferrovalley materials.Upon H atom adsorption,a transitionfrom ferromagnetism to non-magnetism emerges.More interestingly,H-adsorbed NbTe_(2) is predicted to be aquantum spin Hall insulator with a direct band gap of 110meV(equal to a working temperature of 1267 K).The predicted rich quantum effects render the 2H-NbTe_(2) a promising candidate for practical valleytronic andtopological electronics.展开更多
During thewater treatment process,chlorination and ultraviolet(UV)sterilization can modify microplastics(MPs)and alter their physicochemical properties,causing various changes between MPs and other pollutants.In this ...During thewater treatment process,chlorination and ultraviolet(UV)sterilization can modify microplastics(MPs)and alter their physicochemical properties,causing various changes between MPs and other pollutants.In this study,the impact of chlorination and UV modification on the physicochemical properties of polystyrene(PS)and polyvinyl chloride(PVC)were investigated,and the adsorption behavior of pefloxacin(PEF)before and after modificationwas examined.The effect of pH,ionic strength,dissolved organicmatter,heavymetal ions and other water environmental conditions on adsorption behavior was revealed.The results showed that PS had a higher adsorption capacity of PEF than PVC,and the modification increased the presence of O-containing functional groups in the MPs,thereby enhancing the adsorption capacity of both materials.Chlorination had a more significant impact on the physicochemical properties of MPs compared to UV irradiation within the same time period,leading to better adsorption performance of chlorination.The optimal pH for adsorption was found to be 6,and NaCl,sodium alginate and Cu2+would inhibit adsorption to varying degrees,among which the inhibition caused by pH was the strongest.Chlorination and UV modification would weaken the inhibitory effect of environmental factors on the adsorption of PEF by MPs.The main mechanisms of adsorption involved electrostatic interaction and hydrogen bonding.The study clarified the effects of modification on the physicochemical properties of MPs,providing reference for subsequent biotoxicity analysis and environmental protection studies.展开更多
Current research on heterogeneous advanced oxidation processes(HAOPs)predominantly emphasizes catalyst iteration and innovation.Significant efforts have been made to regulate the electron structure and optimize the el...Current research on heterogeneous advanced oxidation processes(HAOPs)predominantly emphasizes catalyst iteration and innovation.Significant efforts have been made to regulate the electron structure and optimize the electron distribution,thereby increasing the catalytic activity.However,this focus often overshadows an equally essential aspect of HAOPs:the adsorption effect.Adsorption is a critical initiator for triggering the interaction of oxidants and contaminants with heterogeneous catalysts.The efficacy of these interactions is influenced by a variety of physicochemical properties,including surface chemistry and pore sizes,which determine the affinities between contaminants and material surfaces.This dispar ity in affinity is pivotal because it underpins the selective removal of contaminants,especially in complex waste streams containing diverse contaminants and competing matrices.Consequently,understanding and mastering these interfacial interactions is fundamentally indispensable not only for improving pro cess efficiency but also for enhancing the selectivity of contaminant removal.Herein,we highlight the importance of adsorption-driven interfacial interactions for fundamentally elucidating the catalytic mechanisms of HAOPs.Such interactions dictate the overall performance of the treatment processes by balancing the adsorption,reaction,and desorption rates on the catalyst surfaces.Elucidating the adsorption effect not only shifts the paradigm in understanding HAOPs but also improves their practical ity in water treatment and wastewater decontamination.Overall,we propose that revisiting adsorption driven interfacial interactions holds great promise for optimizing catalytic processes to develop effective HAOP strategies.展开更多
Recycling rare earth elements(REEs)from waste is necessary for an environmentally sustainable reuse and wastewater management approach.Na-A zeolite was synthesized from coal fly ash(CFA)and applied for Ce^(3+)adsorpti...Recycling rare earth elements(REEs)from waste is necessary for an environmentally sustainable reuse and wastewater management approach.Na-A zeolite was synthesized from coal fly ash(CFA)and applied for Ce^(3+)adsorption.Fourier transform infrared(FTIR)spectra show peaks at 790,500 and 467 cm^(-1),which are bond vibrations of Si-O-Si,Si with Al-O and Si-O-.The surface area is 15.88 m^(2)/g,with a pore size of 2.14 nm.SEM images show a cubic shape,which indicates the formation of zeolite.Field emission and energy disperse spectroscopy(EDS)shows the formation of Si,Al,Na,and O.Na-A zeolite was applied for Ce^(3+)adsorption.The optimum conditions for Ce^(3+)adsorption are 50 ppm concentration,360 min,and pH 6.The maximum adsorption capacity is 176.49 mg/g.Based on the results,it is found that the adsorption of Ce^(3+)by Na-A zeolite is pseudo-second-order.The desorption test using HNO_(3) is more effective than using HCl and H_(2)SO_(4).A desorption efficiency of 97.22%is obtained at 4 cycles.Adsorption test using real sample wastewater demonstrates an adsorption efficiency of 83.35%.展开更多
The mass production and widespread use of Pharmaceuticals and Personal Care Products(PPCPs)have posed a serious threat to the water environment and public health.In this work,a green metal-based Metal Organic Framewor...The mass production and widespread use of Pharmaceuticals and Personal Care Products(PPCPs)have posed a serious threat to the water environment and public health.In this work,a green metal-based Metal Organic Framework(MOF)Bi-NH_(2)-BDC was prepared and characterized,and the adsorption characteristics of Bi-NH_(2)-BDCwere investigated with typical PPCPs-diclofenac sodium(DCF).It was found that DCF mainly covered the adsorbent surface as a single molecular layer,the adsorption reaction was a spontaneous,entropyincreasing exothermic process and the adsorption mechanisms between Bi-NH_(2)-BDC and DCF were hydrogen bonding,π-πinteractions and electrostatic interactions.In addition,Bi-NH_(2)-BDC also had considerable photocatalytic properties,and its application in adsor-bent desorption treatment effectively solved the problem of secondary pollution,achieving a green and sustainable adsorption desorption cycle.展开更多
Treatment of precious metals in electronic waste has attracted tremendous attention and is essential for both environmental protection and resource sustainable development.In this study,a novel adsorbent for precious ...Treatment of precious metals in electronic waste has attracted tremendous attention and is essential for both environmental protection and resource sustainable development.In this study,a novel adsorbent for precious metal ions,V_(2)O_(3)spiny hollow nanospheres(pV_(2)O_(3)SHN),was synthe sized through a one-step hydrothermal-as sis ted methodology for the adsorption of Au(Ⅲ),Ag(Ⅰ),Pd(Ⅱ),and Pt(Ⅳ) from the leaching solution of electronic waste.The results reveal that the p-V2O3SHN hierarchy was successfully constructed with a hollow structure and dense spiny morphology.The prepared p-V2O3SHN can effectively remove precious metal ions such as Au(Ⅲ),Ag(Ⅰ),Pd(Ⅱ),and Pt(Ⅳ),with the selective capture order being Au(Ⅲ)> Ag(Ⅰ)> Pt(Ⅳ)> Pd(Ⅱ)> other metal ions.This superior adsorption capability can be attributed to the multi-diffusible,intermingled composition,and numerous active sites decorating the p-V2O3SHN hierarchy,facilitating the uptake of Au(Ⅲ),Ag(Ⅰ),Pd(Ⅱ),and Pt(Ⅳ) ions from electronic waste.The Langmuir model provided a better fit for the uptake process,revealing maximum uptake capacities of 833.33 mg/g for Au(Ⅲ),370.37 mg/g for Ag(Ⅰ),42.01 mg/g for Pd(Ⅱ),and 77.51 mg/g for Pt(Ⅳ) on p-V_(2)O_(3)SHN.Remarkably,p-V_(2)O_(3)SHN exhibited a robust affinity for the adsorbate due to the presence of surface defects and reduction reactions.The new p-V2O3SHN also demonstrated good reusability for three sorption cycles,highlighting its potential for electronic waste treatment.Due to its facile synthesis and excellent efficiency,hierarchical p-V2O3SHN presents itself as a promising candidate for the selective uptake of Au(Ⅲ),Ag(Ⅰ),Pt(Ⅳ),and Pd(Ⅱ) from electronic waste.展开更多
Hydroxyapatite nanoparticles(HAP NPs)were synthesized by a one‐step hydrothermal method.The surface of HAP NPs was grafted-SH and-COOH chelating groups via in situ surface‐modification with iminodiacetic acid(IDA)an...Hydroxyapatite nanoparticles(HAP NPs)were synthesized by a one‐step hydrothermal method.The surface of HAP NPs was grafted-SH and-COOH chelating groups via in situ surface‐modification with iminodiacetic acid(IDA)and 3‐mercaptopropyl trimethoxysilane(MPS)to afford dual surface‐capped nano‐amendment HAPIDA/MPS.The structure of HAP‐IDA/MPS was characterized,and its adsorption performance for Hg^(2+),Cu^(2+),Zn^(2+),Ni^(2+),Co^(2+),and Cd^(2+)was evaluated.The total adsorption capacity of 0.10 g HAP‐IDA/MPS nano‐amendment for Hg^(2+),Cu^(2+),Zn^(2+),Ni^(2+),Co^(2+),and Cd^(2+)with an initial mass concentration of 20 mg·L^(-1) reached 13.7 mg·g^(-1),about 4.3 times as much as that of HAP.Notably,HAP‐IDA/MPS nano‐amendment displayed the highest immobilization rate for Hg^(2+),possibly because of its chemical reaction with-SH to form sulfide,possessing the lowest solubility product constant among a variety of metal sulfides.展开更多
Adsorption as an effective technique for the remediation of wastewater has been widely used in industrial wastewater treatment due to the advantage of cost-effectiveness,availability of the adsorbent and ease of opera...Adsorption as an effective technique for the remediation of wastewater has been widely used in industrial wastewater treatment due to the advantage of cost-effectiveness,availability of the adsorbent and ease of operation.However,the low adsorption capacity of the reported adsorbents is still a challenge for wastewater treatment with highefficiency.Here,we developed a super adsorbent(SUA-1),which was a kind of porous carbon nanofibers derived from a composite of PAN-based electrospinning and ZIF-8(PAN/ZIF-8)via simple heat treatment process.The asprepared SUA showed an ultra-high adsorption capacity for adsorbing methyl blue(MB)at nearly three times its own weight,as high as 2998.18 mg/g.A series tests demonstrated that the pore-making effect of ZIF-8 during heat treatment process endowed high BET surface area and generated ZnO components as chemical adsorption center.Under the synergistic effect of bonding and non-bonding forces including ionic bond,electrostatic interaction,andπ-πinteraction,the adsorption capacity has been greatly improved.In view of promising efficiency,this work provides guidance and insights for the preparation of highly efficient adsorbents based on electrospinning derived porous carbon nanofibers.展开更多
ZrCoRE(RE denotes rare earth elements)non-evaporable getter films have significant applications in vacuum packaging of micro-electro mechanical system devices because of their excellent gas adsorption performance,low ...ZrCoRE(RE denotes rare earth elements)non-evaporable getter films have significant applications in vacuum packaging of micro-electro mechanical system devices because of their excellent gas adsorption performance,low activation temperature and environmental friendliness.The films were deposited using DC magnetron sputtering with argon and krypton gases under various deposition pressures.The effects of sputtering gas type and pressure on the morphology and hydrogen adsorption performance of ZrCoRE films were investigated.Results show that the films prepared in Ar exhibit a relatively dense structure with fewer grain boundaries.The increase in Ar pressure results in more grain boundaries and gap structures in the films.In contrast,films deposited in Kr display a higher density of grain boundaries and cluster structures,and the films have an obvious columnar crystal structure,with numerous interfaces and gaps distributed between the columnar structures,providing more paths for gas diffusion.As Kr pressure increases,the film demonstrates more pronounced continuous columnar structure growth,accompanied by deeper and wider grain boundaries.This structural configuration provides a larger specific surface area,which significantly improves the hydrogen adsorption speed and capacity.Consequently,high Ar and Kr pressures are beneficial to improve the adsorption performance.展开更多
Since the discovery of carbon dots(CDs)in 2004,the unique photoluminescence phenomenon of CDs has attracted widespread attention.However,the molecular weight of CDs has not been adequately quantified at present,due to...Since the discovery of carbon dots(CDs)in 2004,the unique photoluminescence phenomenon of CDs has attracted widespread attention.However,the molecular weight of CDs has not been adequately quantified at present,due to CDs are atomically imprecise and their molecular weight distribution is broad.In this paper,a series of Pluronic-modified CDs were prepared and the structure of the CDs was briefly analyzed.Subsequently,a molecular weight measurement method based on colligative properties was developed,and the correction coefficient in the algorithm was briefly analyzed.The calculated molecular weight was applied to the determination of surface adsorption capacity.This work provided a method for averaging the molecular weight of atomically imprecise particulate materials,which is expected to provide new opportunities in related fields.展开更多
A new adsorbent was successfully prepared by hydrothermal treatment and chemical activation through coal gasification fine slag(CGFS)and blue algae(BA)as raw materials and used for CO_(2)capture.The CO_(2)chemisorptio...A new adsorbent was successfully prepared by hydrothermal treatment and chemical activation through coal gasification fine slag(CGFS)and blue algae(BA)as raw materials and used for CO_(2)capture.The CO_(2)chemisorption capacity of the adsorbent was further enhanced by taking advantage of the nitrogenous bases contained in the BA.In the hydrothermal process,the addition of BA significantly increased the content of pyrrole nitrogen in the adsorbent.In the activation process,pyrrole nitrogen gradually changed into pyridine nitrogen and graphite nitrogen.Increased BA addition result in a higher specific surface area and microporosity of the adsorbent.The CO_(2)adsorption performance test proved that the CGFS-50%-CA sample has the strongest CO_(2)adsorption capacity at low temperature,up to 15.59 cm^(3)/g,which is mainly through physical adsorption,and the CGFS-10%-CA sample has the strongest CO_(2)adsorption capacity at high temperature,up to 7.31 cm^(3)/g,which is mainly through chemical adsorption.CO_(2)uptake of the CGFS-10%-CA sample was well maintained after 10 cycles,with regeneration efficiencies above 99%.The results indicate that the novel adsorbents with coexistence of physical and chemical adsorption have great potential for CO_(2)adsorption applications.展开更多
We report a robust pillar-layered metal-organic framework,Zn‑tfbdc‑dabco(tfbdc:tetrafluoroterephthal-ate,dabco:1,4-diazabicyclo[2.2.2]octane),featuring the fluorinated pore environment,for the preferential binding of ...We report a robust pillar-layered metal-organic framework,Zn‑tfbdc‑dabco(tfbdc:tetrafluoroterephthal-ate,dabco:1,4-diazabicyclo[2.2.2]octane),featuring the fluorinated pore environment,for the preferential binding of propane over propylene and thus highly inverse selective separation of propane/propylene mixture.The inverse propane-selective performance of Zn‑tfbdc‑dabco for the propane/propylene separation was validated by single-component gas adsorption isotherms,isosteric enthalpy of adsorption calculations,ideal adsorbed solution theory calculations,along with the breakthrough experiment.The customized fluorinated networks served as a propane-trap to form more interactions with the exposed hydrogen atoms of propane,as unveiled by the simulation studies at the molecular level.With the advantage of inverse propane-selective adsorption behavior,high adsorption capacity,good cycling stability,and low isosteric enthalpy of adsorption,Zn‑tfbdc‑dabco can be a promising candidate adsorbent for the challenging propane/propylene separation to realize one-step purification of the target propylene substance.展开更多
Microplastics loaded with phenanthrene and derivatives are widely detected in aquatic environments,and the coating of natural minerals or organic macromolecules may change the environmental behavior of microplastics.I...Microplastics loaded with phenanthrene and derivatives are widely detected in aquatic environments,and the coating of natural minerals or organic macromolecules may change the environmental behavior of microplastics.In this study,three kinds of composites with different coverage were prepared by coating goethite on the surface of polyvinyl chloride microplastics to investigate the adsorption and desorption behavior of phenanthrene(PHE)and 1-hydroxyphenanthrene(1-OHPHE),and the effect of mucin on desorption was inves-tigated.The results showed that goethite promoted the adsorption of PHE and 1-OHPHE by increasing the specific surface area of the composites.With the increase of the cover de-gree,the adsorption of PHE decreased because of the decrease in hydrophobicity;while the adsorption of 1-OHPHE initially increased and then decreased with the contributions of hydrophobic interaction and hydrogen bond.The adsorption of 1-OHPHE could be influenced by the pH and ionic strength primarily through electrostatic interactions and Ca2+bridg-ing.The goethite significantly increased the desorption hysteresis for two chemicals due to the complicated pore structures and increased adsorption affinity.Mucin promoted the desorption of PHE through competitive adsorption,and inhibit the desorption of 1-OHPHE through hydrophobic interaction,hydrogen bonding and Ca2+bridging.This study elucidated the effects of natural minerals on the adsorption and desorption behavior of organic pollutants on microplastics,briefly discussed the effects of organic macromolecules on the desorption behavior of pollutants with different properties,and emphasized the different environmental behaviors of pollutants.展开更多
基金National Natural Science Foundation of China(51966002)Natural Science Foundation of Guangxi Province(2020GXNSFAA159144)。
文摘Adsorption by solid amine adsorbent is a promising technology for decarbonization of flue gas.However,adsorption properties of many solid amine adsorbents need to be enhanced,and it is necessary to further study the CO_(2)adsorption mechanism.A novel CO_(2)adsorbent with high capacity was obtained by grafting 3-aminopropyltriethoxysilane(APTES)on a micro-mesoporous composite molecular sieve ZSM-5/MCM-48 as the support,and then impregnated with tetraethylenepentamine(TEPA)or polyethyleneimine(PEI).The maximum adsorption capacity of APTES-ZSM-5/MCM-48-TEPA-60(A-ZM-T60),loaded with 60%(in mass)TEPA,for CO_(2)reaches 5.82 mmol·g^(-1) at 60℃in 15%(in volume)CO_(2).Carbamate,alkyl ammonium carbamate and carbonate are generated during the chemical adsorption,which is dominant for CO_(2)adsorption because of the reaction between CO_(2)and amino groups on the adsorbent,simultaneously accompanied by weak physical adsorption.All above data confirm that these composites display an outstanding adsorption performance with a bright future for CO_(2)capture from flue gas after desulfurization.
基金Supported by National Natural Science Foundation of China(51674209)Sichuan Province Youth Science and Technology Innovation Team(2021JDTD0017).
文摘Static adsorption and dynamic damage experiments were carried out on typical 8#deep coal rock of the Carboniferous Benxi Formation in the Ordos Basin,NW China,to evaluate the adsorption capacity of hydroxypropyl guar gum and polyacrylamide as fracturing fluid thickeners on deep coal rock surface and the permeability damage caused by adsorption.The adsorption morphology of the thickener was quantitatively characterized by atomic force microscopy,and the main controlling factors of the thickener adsorption were analyzed.Meanwhile,the adsorption mechanism of the thickener was revealed by Zeta potential,Fourier infrared spectroscopy and X-ray photoelectron spectroscopy.The results show that the adsorption capacity of hydroxypropyl guar gum on deep coal surface is 3.86 mg/g,and the permeability of coal rock after adsorption decreases by 35.24%–37.01%.The adsorption capacity of polyacrylamide is 3.29 mg/g,and the permeability of coal rock after adsorption decreases by 14.31%–21.93%.The thickness of the thickener adsorption layer is positively correlated with the mass fraction of thickener and negatively correlated with temperature,and a decrease in pH will reduce the thickness of the hydroxypropyl guar gum adsorption layer and make the distribution frequency of the thickness of polyacrylamide adsorption layer more concentrated.Functional group condensation and intermolecular force are chemical and physical forces for adsorbing fracturing fluid thickener in deep coal rock.Optimization of thickener mass fraction,chemical modification of thickener molecular,oxidative thermal degradation of polymer and addition of desorption agent can reduce the potential damages on micro-nano pores and cracks in coal rock.
文摘Metal-Organic Frameworks(MOFs)have emerged as promising materials for gas adsorption and separation due to their exceptional surface area,tunable porosity,and versatility in functionalization.This paper explores the mechanisms of gas adsorption in MOFs,including physical adsorption,chemisorption,and synergistic effects,which contribute to their efficiency in capturing and separating gases.The applications of MOFs in key areas such as carbon dioxide capture,hydrogen storage,natural gas separation,and air purification are discussed,highlighting their potential to address pressing environmental and energy challenges.Additionally,the use of MOFs in selective gas separation,membranes,and adsorption-based technologies like Pressure Swing Adsorption(PSA)and Vacuum Swing Adsorption(VSA)is explored,emphasizing their advantages over traditional materials.Despite challenges related to scalability,stability,and cost,MOFs hold great promise for advancing gas separation technologies in the near future,offering more efficient,sustainable,and environmentally friendly solutions.
基金supported by the National Science Fund for Distinguished Young Scholars(No.51925404)the National Natural Science Foundation of China(Nos.52104233,52104228 and 52404261)the Fundamental Research Funds for the Central Universities(No.2023ZDPY05).
文摘This study mainly investigates the influence of pore water characteristics on the adsorption properties of coalbed methane through integrated low field nuclear magnetic resonance(LF-NMR),adsorption experiments,and molecular dynamics(MD)simulations.Pore water states in three coal ranks were characterized during progressive hydration.Multi-scale analysis revealed how pore water evolution regulates methane adsorption processes.During the diffusion-dominated stage(M2-M3),adsorbed water penetrates into the micropores.In the highly wettable brown coal(L1),the adsorbed water content reaches 2.12 g while in the anthracite(A1),it is only 0.29 g.During the active water injection stage(M4-M6),non-adsorbed water dominates in anthracite(over 85%of the total water content of 4.01 g),while adsorbed water remains dominant in lignite(over 60%of the total water content of 3.52 g).Water content plays a key role in methane adsorption in coal.During the water addition phase,the influence of methane adsorption on medium-to-low-rank coal is relatively weak,while the methane adsorption capacity of high-rank coal A1 shows a significant decrease during both the water diffusion and water addition phases,corresponding to a reduction in Langmuir volume of 21.22 cm^(3)/g.Molecular dynamics(MD)results further show that the free energy between molecules on the surface of hydroxyl-modified coal increases,with hydroxyl groups driving electrostatic interactions between coal and water molecules.Increased steric hindrance inhibits hydrogen bond formation and reduces the rate of hydrogen bond growth.There is a significant correlation between pore water content and coal-water molecular interaction energy,which cross-scale validates the results of LF-NMR testing and MD simulations.
基金supported by the National Natural Science Foundation of China(Nos.51778618 and 52070192)the State Key Laboratory of Materials-Oriented Chemical Engineering(No.SKL-MCE-23B09)the open fund of Information Materials and Intelligent Sensing Laboratory of Anhui Province(No.IMIS202213).
文摘Increasing attention has been paid to radioactive wastewater to direct discharge in Japan or accidental leaks.Strontium-90(90Sr)and Cobalt-60(^(60)Co)are the most hazardous nuclides in waste discharged form nuclear reactors.Because of their high solubility and long half-lives,these radioisotopes can persist for hundreds of years before decaying to negligible levels.Herein,a green and biodegradable material nanoscale zero-valent iron(nZVI)supported by bacterial cellulose particles(BCP-nZVI)is constructed for the first time to adsorb Co^(2+)and Sr^(2+)in single and binary systems.BCP-nZVI shows superior adsorption capacities of Co^(2+)and Sr^(2+)in a single system within a wide range of pH values from 5 to 7,while the coexistence of Co^(2+)adsorption inhibits the Sr^(2+)in binary system.Pseudo-second-order dynamics model and Langmuir isothermal model can be indicated the BCP-nZVI adsorption progress with 107.10 mg/g(Co^(2+))and 64.96 mg/g(Sr^(2+))maximum adsorption capacity.BCP-nZVI has outstanding stability,allowing it to be stored for more than one month with compromising its performance.More importantly,BCP-nZVI exhibits exceptional removal efficiency of Co^(2+)(92.53%)and Sr^(2+)(58.62%)removal in natural seawater systems.The mechanism investigation illustrates the high adsorption capacity of BCP-nZVI for Co^(2+)is controlled by redox and hydroxyl complexation.While Sr^(2+)is controlled by hydroxyl complexed adsorption,thus it has weak against interference by cations like Na^(+),Ca^(2+),etc.BCP-nZVI exhibits the advantages of high adsorption capacity,wide pH range,strong stability,and good applicability in natural seawater,which has excellent potential for application in radioactive ions removal.
基金financially supported by the National Key Research and Development Program of China(No.2017YFD0800305)。
文摘As the fundamental unit of soil,aggregates exhibit significant variations in their abilities to adsorb and desorb trace elements,depending on their size.Batch experiments were conducted to investigate the characteristics of adsorption and desorption of cadmium(Cd),copper(Cu),and lead(Pb)on and from soil aggregate fractions from three layers of a calcareous soil profile in Changxing County,Zhejiang Prvince,China.The results showed that both Langmuir and Freundlich models successfully described the isothermal adsorption processes of single Cd,Cu,and Pb on different soil aggregates.Additionally,aggregates from the bottom soil layer showed the highest maximum adsorption capacity and required the lowest energy for Cd,Cu,and Pb adsorption compared to aggregates from upper soil layers.The physicochemical properties of soil aggregates were found to govern the adsorption and desorption processes of heavy metals rather than the aggregate size,wherein the contents of iron/aluminum oxides and organic matter were the most crucial influencing factors.Cadmium displayed higher mobility than Cu and Pb in different soil aggregates,and the maximum adsorption capacities of the metal ions followed the order of Pb>Cu>Cd,while their desorption rates followed the order of Cd>Cu>Pb.Additionally,the<0.053 mm microaggregates presented the lowest desorption rates for Cd,Cu,and Pb compared to other soil aggregate fractions in each soil layer.Furthermore,the orthogonal experiment results demonstrated that the competitive adsorption between metals occurred on soil aggregates in the ternary heavy metal system,but only the desorption of Pb was significantly affected by the coexistence of Cd and Cu.
基金financial support from the National Natural Science Foundation of China(52203123)the Sichuan Science and Technology Program(2023NSFSC0991)+2 种基金the State Key Laboratory of Polymer Materials Engineering(sklpme 2023-1-05 and sklpme 2024-2-04)the Fundamental Research Funds for the Central Universitiespartially sponsored by the Double First-Class Construction Funds of Sichuan University。
文摘Solvation structures fundamentally control the ion-transport dynamics and mechanical properties of polymer electrolytes.However,there is a lack of strategies to rationally regulate the solvation structures and fundamental understanding on how they control the electrochemical performances.Herein,by harnessing the electrostatic adsorption of one-dimensional nanofiller(i.e.,surface-charged halloysite nanotubes,d-HNTs),we successfully fabricate a high-performance polymer nanocomposite electrolyte enabled by strong surface adsorption,referred as adsorption-state polymer electrolyte(ASPE).This ASPE shows fast ion transport(0.71±0.05 mS cm^(-1)at room temperature),high mechanical strength and toughness(10.3±0.05 MPa;15.73 MJ m^(-3)),improved lithium-ion transference number,and long cycle life with lithium metal anode,in comparison with the sample without the d-HNT adsorption effect.To fundamentally understand these high performances,an anion-rich asymmetric solvent structure model is further proposed and evidenced by both experiments and simulation studies.Results show that the electrostatic adsorption among the d-HNT,ionic liquid electrolyte,and polymer chain generates a nano filler-supported fast ion-conduction pathway with asymmetric Li+-coordination microenvironment.Meanwhile,the anion-rich asymmetric solvent structure model of ASPE also generates a fast de-solvation and anion-derived stable solid-electrolyte interphase for lithium metal anode.The high performance and understanding of the mechanism for ASPE provide a promising path to develop advanced polymer electrolytes.
基金supported by the National Natural Science Foundation of China(Grant No.11874092)the Fok Ying Tong Education Foundation,China(Grant No.161005)+2 种基金the Science Fund for Distinguished Young Scholars of Hunan Province(Grant No.2021JJ10039)the Planned Science and Technology Project of Hunan Province(Grant No.2017RS3034)the Postgraduate Scientific Research Innovation Project of Hunan Province(Grant No.CX20240080)。
文摘Quantum spin Hall state usually emerges in non-magnetic systems,which are typically incompatible withferromagnetism.Here,we predict that two-dimensional(2D)ferrovalley semiconductor single-layer(SL)2HNbTe_(2)can be transformed into a 2D room-temperature quantum spin Hall insulator through hydrogen(H)atom adsorption.The SL 2H-NbTe_(2) is found to possess a giant spontaneous valley polarization of 274 meV,which is much larger than those of most available ferrovalley materials.Upon H atom adsorption,a transitionfrom ferromagnetism to non-magnetism emerges.More interestingly,H-adsorbed NbTe_(2) is predicted to be aquantum spin Hall insulator with a direct band gap of 110meV(equal to a working temperature of 1267 K).The predicted rich quantum effects render the 2H-NbTe_(2) a promising candidate for practical valleytronic andtopological electronics.
基金supported by the Shanxi Scholarship Council of China(No.2023-054)the Applied Basic Research Project of Shanxi Province,China(No.20210302123121)the National Natural Science Foundation of China(No.52170045).
文摘During thewater treatment process,chlorination and ultraviolet(UV)sterilization can modify microplastics(MPs)and alter their physicochemical properties,causing various changes between MPs and other pollutants.In this study,the impact of chlorination and UV modification on the physicochemical properties of polystyrene(PS)and polyvinyl chloride(PVC)were investigated,and the adsorption behavior of pefloxacin(PEF)before and after modificationwas examined.The effect of pH,ionic strength,dissolved organicmatter,heavymetal ions and other water environmental conditions on adsorption behavior was revealed.The results showed that PS had a higher adsorption capacity of PEF than PVC,and the modification increased the presence of O-containing functional groups in the MPs,thereby enhancing the adsorption capacity of both materials.Chlorination had a more significant impact on the physicochemical properties of MPs compared to UV irradiation within the same time period,leading to better adsorption performance of chlorination.The optimal pH for adsorption was found to be 6,and NaCl,sodium alginate and Cu2+would inhibit adsorption to varying degrees,among which the inhibition caused by pH was the strongest.Chlorination and UV modification would weaken the inhibitory effect of environmental factors on the adsorption of PEF by MPs.The main mechanisms of adsorption involved electrostatic interaction and hydrogen bonding.The study clarified the effects of modification on the physicochemical properties of MPs,providing reference for subsequent biotoxicity analysis and environmental protection studies.
基金supported by the National Key Research and Development Program of China(2022YFC3205300)the National Natural Science Foundation of China(22176124).
文摘Current research on heterogeneous advanced oxidation processes(HAOPs)predominantly emphasizes catalyst iteration and innovation.Significant efforts have been made to regulate the electron structure and optimize the electron distribution,thereby increasing the catalytic activity.However,this focus often overshadows an equally essential aspect of HAOPs:the adsorption effect.Adsorption is a critical initiator for triggering the interaction of oxidants and contaminants with heterogeneous catalysts.The efficacy of these interactions is influenced by a variety of physicochemical properties,including surface chemistry and pore sizes,which determine the affinities between contaminants and material surfaces.This dispar ity in affinity is pivotal because it underpins the selective removal of contaminants,especially in complex waste streams containing diverse contaminants and competing matrices.Consequently,understanding and mastering these interfacial interactions is fundamentally indispensable not only for improving pro cess efficiency but also for enhancing the selectivity of contaminant removal.Herein,we highlight the importance of adsorption-driven interfacial interactions for fundamentally elucidating the catalytic mechanisms of HAOPs.Such interactions dictate the overall performance of the treatment processes by balancing the adsorption,reaction,and desorption rates on the catalyst surfaces.Elucidating the adsorption effect not only shifts the paradigm in understanding HAOPs but also improves their practical ity in water treatment and wastewater decontamination.Overall,we propose that revisiting adsorption driven interfacial interactions holds great promise for optimizing catalytic processes to develop effective HAOP strategies.
基金Project supported by Rumah Program 2023 and Net Zero Emission Program(1507/Ⅱ.7/HK.01.00/6/2023)a research facility from the National Research and Innovation Agency of Republic of Indonesia。
文摘Recycling rare earth elements(REEs)from waste is necessary for an environmentally sustainable reuse and wastewater management approach.Na-A zeolite was synthesized from coal fly ash(CFA)and applied for Ce^(3+)adsorption.Fourier transform infrared(FTIR)spectra show peaks at 790,500 and 467 cm^(-1),which are bond vibrations of Si-O-Si,Si with Al-O and Si-O-.The surface area is 15.88 m^(2)/g,with a pore size of 2.14 nm.SEM images show a cubic shape,which indicates the formation of zeolite.Field emission and energy disperse spectroscopy(EDS)shows the formation of Si,Al,Na,and O.Na-A zeolite was applied for Ce^(3+)adsorption.The optimum conditions for Ce^(3+)adsorption are 50 ppm concentration,360 min,and pH 6.The maximum adsorption capacity is 176.49 mg/g.Based on the results,it is found that the adsorption of Ce^(3+)by Na-A zeolite is pseudo-second-order.The desorption test using HNO_(3) is more effective than using HCl and H_(2)SO_(4).A desorption efficiency of 97.22%is obtained at 4 cycles.Adsorption test using real sample wastewater demonstrates an adsorption efficiency of 83.35%.
基金supported by Liaoning Revitalization Talents Program(No.XLYC1907173)the Science and Technology General Project of Liaoning Provincial Education Department(No.LJKMZ20221835)the National Natural Science Foundation of China(Nos.22006073 and 22205027).
文摘The mass production and widespread use of Pharmaceuticals and Personal Care Products(PPCPs)have posed a serious threat to the water environment and public health.In this work,a green metal-based Metal Organic Framework(MOF)Bi-NH_(2)-BDC was prepared and characterized,and the adsorption characteristics of Bi-NH_(2)-BDCwere investigated with typical PPCPs-diclofenac sodium(DCF).It was found that DCF mainly covered the adsorbent surface as a single molecular layer,the adsorption reaction was a spontaneous,entropyincreasing exothermic process and the adsorption mechanisms between Bi-NH_(2)-BDC and DCF were hydrogen bonding,π-πinteractions and electrostatic interactions.In addition,Bi-NH_(2)-BDC also had considerable photocatalytic properties,and its application in adsor-bent desorption treatment effectively solved the problem of secondary pollution,achieving a green and sustainable adsorption desorption cycle.
基金supported by the Open Project of State Key Laboratory of Urban Water Resource and Environment,Harbin Institute of Technology(No.ES202306).
文摘Treatment of precious metals in electronic waste has attracted tremendous attention and is essential for both environmental protection and resource sustainable development.In this study,a novel adsorbent for precious metal ions,V_(2)O_(3)spiny hollow nanospheres(pV_(2)O_(3)SHN),was synthe sized through a one-step hydrothermal-as sis ted methodology for the adsorption of Au(Ⅲ),Ag(Ⅰ),Pd(Ⅱ),and Pt(Ⅳ) from the leaching solution of electronic waste.The results reveal that the p-V2O3SHN hierarchy was successfully constructed with a hollow structure and dense spiny morphology.The prepared p-V2O3SHN can effectively remove precious metal ions such as Au(Ⅲ),Ag(Ⅰ),Pd(Ⅱ),and Pt(Ⅳ),with the selective capture order being Au(Ⅲ)> Ag(Ⅰ)> Pt(Ⅳ)> Pd(Ⅱ)> other metal ions.This superior adsorption capability can be attributed to the multi-diffusible,intermingled composition,and numerous active sites decorating the p-V2O3SHN hierarchy,facilitating the uptake of Au(Ⅲ),Ag(Ⅰ),Pd(Ⅱ),and Pt(Ⅳ) ions from electronic waste.The Langmuir model provided a better fit for the uptake process,revealing maximum uptake capacities of 833.33 mg/g for Au(Ⅲ),370.37 mg/g for Ag(Ⅰ),42.01 mg/g for Pd(Ⅱ),and 77.51 mg/g for Pt(Ⅳ) on p-V_(2)O_(3)SHN.Remarkably,p-V_(2)O_(3)SHN exhibited a robust affinity for the adsorbate due to the presence of surface defects and reduction reactions.The new p-V2O3SHN also demonstrated good reusability for three sorption cycles,highlighting its potential for electronic waste treatment.Due to its facile synthesis and excellent efficiency,hierarchical p-V2O3SHN presents itself as a promising candidate for the selective uptake of Au(Ⅲ),Ag(Ⅰ),Pt(Ⅳ),and Pd(Ⅱ) from electronic waste.
文摘Hydroxyapatite nanoparticles(HAP NPs)were synthesized by a one‐step hydrothermal method.The surface of HAP NPs was grafted-SH and-COOH chelating groups via in situ surface‐modification with iminodiacetic acid(IDA)and 3‐mercaptopropyl trimethoxysilane(MPS)to afford dual surface‐capped nano‐amendment HAPIDA/MPS.The structure of HAP‐IDA/MPS was characterized,and its adsorption performance for Hg^(2+),Cu^(2+),Zn^(2+),Ni^(2+),Co^(2+),and Cd^(2+)was evaluated.The total adsorption capacity of 0.10 g HAP‐IDA/MPS nano‐amendment for Hg^(2+),Cu^(2+),Zn^(2+),Ni^(2+),Co^(2+),and Cd^(2+)with an initial mass concentration of 20 mg·L^(-1) reached 13.7 mg·g^(-1),about 4.3 times as much as that of HAP.Notably,HAP‐IDA/MPS nano‐amendment displayed the highest immobilization rate for Hg^(2+),possibly because of its chemical reaction with-SH to form sulfide,possessing the lowest solubility product constant among a variety of metal sulfides.
基金Natural Science Foundation of China(22134005,22204011)Chongqing Talents Program for Outstanding Scientists(cstc2021ycjh-bgzxm0179)。
文摘Adsorption as an effective technique for the remediation of wastewater has been widely used in industrial wastewater treatment due to the advantage of cost-effectiveness,availability of the adsorbent and ease of operation.However,the low adsorption capacity of the reported adsorbents is still a challenge for wastewater treatment with highefficiency.Here,we developed a super adsorbent(SUA-1),which was a kind of porous carbon nanofibers derived from a composite of PAN-based electrospinning and ZIF-8(PAN/ZIF-8)via simple heat treatment process.The asprepared SUA showed an ultra-high adsorption capacity for adsorbing methyl blue(MB)at nearly three times its own weight,as high as 2998.18 mg/g.A series tests demonstrated that the pore-making effect of ZIF-8 during heat treatment process endowed high BET surface area and generated ZnO components as chemical adsorption center.Under the synergistic effect of bonding and non-bonding forces including ionic bond,electrostatic interaction,andπ-πinteraction,the adsorption capacity has been greatly improved.In view of promising efficiency,this work provides guidance and insights for the preparation of highly efficient adsorbents based on electrospinning derived porous carbon nanofibers.
基金National Natural Science Foundation of China(62171208)Natural Science Foundation of Gansu Province(23JRRA1355)。
文摘ZrCoRE(RE denotes rare earth elements)non-evaporable getter films have significant applications in vacuum packaging of micro-electro mechanical system devices because of their excellent gas adsorption performance,low activation temperature and environmental friendliness.The films were deposited using DC magnetron sputtering with argon and krypton gases under various deposition pressures.The effects of sputtering gas type and pressure on the morphology and hydrogen adsorption performance of ZrCoRE films were investigated.Results show that the films prepared in Ar exhibit a relatively dense structure with fewer grain boundaries.The increase in Ar pressure results in more grain boundaries and gap structures in the films.In contrast,films deposited in Kr display a higher density of grain boundaries and cluster structures,and the films have an obvious columnar crystal structure,with numerous interfaces and gaps distributed between the columnar structures,providing more paths for gas diffusion.As Kr pressure increases,the film demonstrates more pronounced continuous columnar structure growth,accompanied by deeper and wider grain boundaries.This structural configuration provides a larger specific surface area,which significantly improves the hydrogen adsorption speed and capacity.Consequently,high Ar and Kr pressures are beneficial to improve the adsorption performance.
文摘Since the discovery of carbon dots(CDs)in 2004,the unique photoluminescence phenomenon of CDs has attracted widespread attention.However,the molecular weight of CDs has not been adequately quantified at present,due to CDs are atomically imprecise and their molecular weight distribution is broad.In this paper,a series of Pluronic-modified CDs were prepared and the structure of the CDs was briefly analyzed.Subsequently,a molecular weight measurement method based on colligative properties was developed,and the correction coefficient in the algorithm was briefly analyzed.The calculated molecular weight was applied to the determination of surface adsorption capacity.This work provided a method for averaging the molecular weight of atomically imprecise particulate materials,which is expected to provide new opportunities in related fields.
基金supported by the National Natural Science Foundation of China(22168032)the National Key Research and Development Program of China(2023YFC3904302,2023YFB4103500)the Key Projects of Ning Dong Energy and Chemical Industry Base(2023NDKJXMLX022).
文摘A new adsorbent was successfully prepared by hydrothermal treatment and chemical activation through coal gasification fine slag(CGFS)and blue algae(BA)as raw materials and used for CO_(2)capture.The CO_(2)chemisorption capacity of the adsorbent was further enhanced by taking advantage of the nitrogenous bases contained in the BA.In the hydrothermal process,the addition of BA significantly increased the content of pyrrole nitrogen in the adsorbent.In the activation process,pyrrole nitrogen gradually changed into pyridine nitrogen and graphite nitrogen.Increased BA addition result in a higher specific surface area and microporosity of the adsorbent.The CO_(2)adsorption performance test proved that the CGFS-50%-CA sample has the strongest CO_(2)adsorption capacity at low temperature,up to 15.59 cm^(3)/g,which is mainly through physical adsorption,and the CGFS-10%-CA sample has the strongest CO_(2)adsorption capacity at high temperature,up to 7.31 cm^(3)/g,which is mainly through chemical adsorption.CO_(2)uptake of the CGFS-10%-CA sample was well maintained after 10 cycles,with regeneration efficiencies above 99%.The results indicate that the novel adsorbents with coexistence of physical and chemical adsorption have great potential for CO_(2)adsorption applications.
文摘We report a robust pillar-layered metal-organic framework,Zn‑tfbdc‑dabco(tfbdc:tetrafluoroterephthal-ate,dabco:1,4-diazabicyclo[2.2.2]octane),featuring the fluorinated pore environment,for the preferential binding of propane over propylene and thus highly inverse selective separation of propane/propylene mixture.The inverse propane-selective performance of Zn‑tfbdc‑dabco for the propane/propylene separation was validated by single-component gas adsorption isotherms,isosteric enthalpy of adsorption calculations,ideal adsorbed solution theory calculations,along with the breakthrough experiment.The customized fluorinated networks served as a propane-trap to form more interactions with the exposed hydrogen atoms of propane,as unveiled by the simulation studies at the molecular level.With the advantage of inverse propane-selective adsorption behavior,high adsorption capacity,good cycling stability,and low isosteric enthalpy of adsorption,Zn‑tfbdc‑dabco can be a promising candidate adsorbent for the challenging propane/propylene separation to realize one-step purification of the target propylene substance.
基金supported by the National Natural Science Foundation of China(Nos.42077337 and 42277228)the Guangdong Basic and Applied Basic Research Foundation(No.2020A1515011560)the Science and Technology Planning Project of Guangzhou(Nos.202002030297 and 202002020072).
文摘Microplastics loaded with phenanthrene and derivatives are widely detected in aquatic environments,and the coating of natural minerals or organic macromolecules may change the environmental behavior of microplastics.In this study,three kinds of composites with different coverage were prepared by coating goethite on the surface of polyvinyl chloride microplastics to investigate the adsorption and desorption behavior of phenanthrene(PHE)and 1-hydroxyphenanthrene(1-OHPHE),and the effect of mucin on desorption was inves-tigated.The results showed that goethite promoted the adsorption of PHE and 1-OHPHE by increasing the specific surface area of the composites.With the increase of the cover de-gree,the adsorption of PHE decreased because of the decrease in hydrophobicity;while the adsorption of 1-OHPHE initially increased and then decreased with the contributions of hydrophobic interaction and hydrogen bond.The adsorption of 1-OHPHE could be influenced by the pH and ionic strength primarily through electrostatic interactions and Ca2+bridg-ing.The goethite significantly increased the desorption hysteresis for two chemicals due to the complicated pore structures and increased adsorption affinity.Mucin promoted the desorption of PHE through competitive adsorption,and inhibit the desorption of 1-OHPHE through hydrophobic interaction,hydrogen bonding and Ca2+bridging.This study elucidated the effects of natural minerals on the adsorption and desorption behavior of organic pollutants on microplastics,briefly discussed the effects of organic macromolecules on the desorption behavior of pollutants with different properties,and emphasized the different environmental behaviors of pollutants.
