Solar radio burst(SRB)is one of the main natural interference sources of Global Positioning System(GPS)signals and can reduce the signal-to-noise ratio(SNR),directly affecting the tracking performance of GPS receivers...Solar radio burst(SRB)is one of the main natural interference sources of Global Positioning System(GPS)signals and can reduce the signal-to-noise ratio(SNR),directly affecting the tracking performance of GPS receivers.In this paper,a tracking algorithm based on the adaptive Kalman filter(AKF)with carrier-to-noise ratio estimation is proposed and compared with the conventional second-order phase-locked loop tracking algo-rithms and the improved Sage-Husa adaptive Kalman filter(SHAKF)algorithm.It is discovered that when the SRBs occur,the improved SHAKF and the AKF with carrier-to-noise ratio estimation enable stable tracking to loop signals.The conven-tional second-order phase-locked loop tracking algorithms fail to track the receiver signal.The standard deviation of the carrier phase error of the AKF with carrier-to-noise ratio estimation out-performs 50.51%of the improved SHAKF algorithm,showing less fluctuation and better stability.The proposed algorithm is proven to show more excellent adaptability in the severe envi-ronment caused by the SRB occurrence and has better tracking performance.展开更多
Random vibration control is aimed at reproducing the power spectral density(PSD)at specified control points.The classical frequency-spectrum equalization algorithm needs to compute the average of the multiple frequenc...Random vibration control is aimed at reproducing the power spectral density(PSD)at specified control points.The classical frequency-spectrum equalization algorithm needs to compute the average of the multiple frequency response functions(FRFs),which lengthens the control loop time in the equalization process.Likewise,the feedback control algorithm has a very slow convergence rate due to the small value of the feedback gain parameter to ensure stability of the system.To overcome these limitations,an adaptive inverse control of random vibrations based on the filtered-X least mean-square(LMS)algorithm is proposed.Furthermore,according to the description and iteration characteristics of random vibration tests in the frequency domain,the frequency domain LMS algorithm is adopted to refine the inverse characteristics of the FRF instead of the traditional time domain LMS algorithm.This inverse characteristic,which is called the impedance function of the system under control,is used to update the drive PSD directly.The test results indicated that in addition to successfully avoiding the instability problem that occurs during the iteration process,the adaptive control strategy minimizes the amount of time needed to obtain a short control loop and achieve equalization.展开更多
A Matrix Inversion Normalized Least Mean Square (MI-NLMS) adaptive beamforming algorithm was developed for smart antenna application. The MI-NLMS which combined the individual good aspects of Sample Matrix Inversion (...A Matrix Inversion Normalized Least Mean Square (MI-NLMS) adaptive beamforming algorithm was developed for smart antenna application. The MI-NLMS which combined the individual good aspects of Sample Matrix Inversion (SMI) and the Normalized Least Mean Square (NLMS) algorithms is described. Simulation results showed that the less complexity MI-NLMS yields 15 dB improvements in interference suppression and 5 dB gain enhancement over LMS algorithm, converges from the initial iteration and achieves 24% BER improvements at cochannel interference equal to 5. For the case of 4-element uniform linear array antenna, MI-NLMS achieved 76% BER reduction over LMS algorithm.展开更多
An improved algorithm is presented to identify the secondary path based on the adaptive notch filter approach. Since the interference from the narrow band excitation signal is suppressed by the adaptive notch filter, ...An improved algorithm is presented to identify the secondary path based on the adaptive notch filter approach. Since the interference from the narrow band excitation signal is suppressed by the adaptive notch filter, the convergent speed of the on-line control path identification process is significantly improved. As a result, the controller performance is greatly enhanced. Besides the algorithm development, some important factors, such as the influence of reference signal on the controller convergent speed, are also discussed. The effectiveness of the algorithm is verified by experimental results.展开更多
The least means squares （LMS） adaptive filter algorithm was used in active suspension system. By adjusting the weight of adaptive filter, the minimum quadratic performance index was obtained. For two-degree-of-freed...The least means squares （LMS） adaptive filter algorithm was used in active suspension system. By adjusting the weight of adaptive filter, the minimum quadratic performance index was obtained. For two-degree-of-freedom vehicle suspension model, LMS adaptive controller was designed. The acceleration of the sprung mass,the dynamic tyre load between wheels and road,and the dynamic deflection between sprung mass and unsprung mass were determined as the evaluation targets of suspension performance. For LMS adaptive control suspension, compared with passive suspension, acceleration power spectral density of sprung mass acceleration under the road input model decreased 8-10 times in high frequency resonance band or low frequency resonance band. The simulation results show that LMS adaptive control is simple and remarkably effective. It further proves that the active control suspension system can improve both the riding comfort and handling safety in various operation conditions, and the method is fit for the active control of the suspension system.展开更多
The phenomenon of a target echo peak overlapping with the backscattered echo peak significantly undermines the detection range and precision of underwater laser fuzes.To overcome this issue,we propose a four-quadrant ...The phenomenon of a target echo peak overlapping with the backscattered echo peak significantly undermines the detection range and precision of underwater laser fuzes.To overcome this issue,we propose a four-quadrant dual-beam circumferential scanning laser fuze to distinguish various interference signals and provide more real-time data for the backscatter filtering algorithm.This enhances the algorithm loading capability of the fuze.In order to address the problem of insufficient filtering capacity in existing linear backscatter filtering algorithms,we develop a nonlinear backscattering adaptive filter based on the spline adaptive filter least mean square(SAF-LMS)algorithm.We also designed an algorithm pause module to retain the original trend of the target echo peak,improving the time discrimination accuracy and anti-interference capability of the fuze.Finally,experiments are conducted with varying signal-to-noise ratios of the original underwater target echo signals.The experimental results show that the average signal-to-noise ratio before and after filtering can be improved by more than31 d B,with an increase of up to 76%in extreme detection distance.展开更多
By analyzing algorithms available for variable step size least mean square(LMS)adaptive filter,a new modified LMS adaptive filtering algorithm with variable step size is proposed,along with performance analysis based ...By analyzing algorithms available for variable step size least mean square(LMS)adaptive filter,a new modified LMS adaptive filtering algorithm with variable step size is proposed,along with performance analysis based on different parameters.Compared with the existing algorithms through the simulation,the proposed algorithm has faster convergence speed and smaller steady state error.展开更多
In this paper, we consider the problem of unknown parameter estimation using a set of nodes that are deployed over an area. The recently proposed distributed adaptive estimation algorithms(also known as adaptive netwo...In this paper, we consider the problem of unknown parameter estimation using a set of nodes that are deployed over an area. The recently proposed distributed adaptive estimation algorithms(also known as adaptive networks) are appealing solutions to the mentioned problem when the statistical information of the underlying process is not available or it varies over time. In this paper, our goal is to develop a new incremental least-mean square(LMS) adaptive network that considers the quality of measurements collected by the nodes. Thus, we use an adaptive combination strategy which assigns each node a step size according to its quality of measurement. The adaptive combination strategy improves the robustness of the proposed algorithm to the spatial variations of signal-to-noise ratio(SNR). The performance of our algorithm is more remarkable in inhomogeneous environments when there are some nodes with low SNRs in the network. The simulation results indicate the efficiency of the proposed algorithm.展开更多
Based on the good time-frequency localization of the wavelet packet modulation （WPM） system and the analysis of the muhitone （MT） interference, an improved WPM narrow band interference （NBI） rejection system usi...Based on the good time-frequency localization of the wavelet packet modulation （WPM） system and the analysis of the muhitone （MT） interference, an improved WPM narrow band interference （NBI） rejection system using an adaptive least mean square （LMS） algorithm is discussed in this paper. In the WPM interference rejection system, according to the structure of the wavelet packet tree （WFF） and the characteristic of the MT interference, the demodulated WPM signal which contains the interference component is filtered using an adaptive LMS filtering implementation. Theoretical analysis and simulation resuits show that the proposed method improves the bit error rate （BER） performance of the WPM system in the presence of MT interference.展开更多
In this paper,the inter-symbol interference and eliminating method are introduced.After analyzing the principle of adaptive equalization,we designed an adaptive equalizer using the LMS algorithm,and constructed a simu...In this paper,the inter-symbol interference and eliminating method are introduced.After analyzing the principle of adaptive equalization,we designed an adaptive equalizer using the LMS algorithm,and constructed a simulation system using MATLAB.Then we analyzed the convergence speed and mean square error characteristic of the adaptive equalizer by changing the step length factor to test the performance of the algorithm.展开更多
This paper puts forward a new variable step size LMS adaptive algorithm based on variable region. The step size p（k） in the algorithm varies with the variation of the region of deviation e （k） to ensure the optimi...This paper puts forward a new variable step size LMS adaptive algorithm based on variable region. The step size p（k） in the algorithm varies with the variation of the region of deviation e （k） to ensure the optimization of the three performance objectives including initial convergent speed, trace ability of the time-varying system and steady disregulation. The paper demonstrates the convergence of the algorithm accompanied by random noise,展开更多
外辐射源雷达利用直达天线接收的参考信号作为样本滤除目标回波中的杂波,但由于雨、云、树木或其他运动物体等的影响,回波内可能会包含非零频杂波,导致处理后杂波残余较大,影响目标检测。针对上述问题,提出了一种基于杂波识别的扩展最...外辐射源雷达利用直达天线接收的参考信号作为样本滤除目标回波中的杂波,但由于雨、云、树木或其他运动物体等的影响,回波内可能会包含非零频杂波,导致处理后杂波残余较大,影响目标检测。针对上述问题,提出了一种基于杂波识别的扩展最小均方(Least Mean Square,LMS)对消算法。首先利用模糊函数估计杂波的频率和时延分布,构建含频率信息的多个参考信号。再把多个参考信号插入LMS算法中推导了扩展LMS算法,利用扩展LMS算法可以同时对消静、动杂波。扩展LMS算法能降低对消剩余,提高目标的信噪比,仿真分析和实测数据处理验证了算法的有效性。展开更多
Cloud computing has become an essential technology for the management and processing of large datasets,offering scalability,high availability,and fault tolerance.However,optimizing data replication across multiple dat...Cloud computing has become an essential technology for the management and processing of large datasets,offering scalability,high availability,and fault tolerance.However,optimizing data replication across multiple data centers poses a significant challenge,especially when balancing opposing goals such as latency,storage costs,energy consumption,and network efficiency.This study introduces a novel Dynamic Optimization Algorithm called Dynamic Multi-Objective Gannet Optimization(DMGO),designed to enhance data replication efficiency in cloud environments.Unlike traditional static replication systems,DMGO adapts dynamically to variations in network conditions,system demand,and resource availability.The approach utilizes multi-objective optimization approaches to efficiently balance data access latency,storage efficiency,and operational costs.DMGO consistently evaluates data center performance and adjusts replication algorithms in real time to guarantee optimal system efficiency.Experimental evaluations conducted in a simulated cloud environment demonstrate that DMGO significantly outperforms conventional static algorithms,achieving faster data access,lower storage overhead,reduced energy consumption,and improved scalability.The proposed methodology offers a robust and adaptable solution for modern cloud systems,ensuring efficient resource consumption while maintaining high performance.展开更多
The way to use the least-mean-square (LMS) arithmetic to cancel the direct wave for a passive radar system is introduced. The model of the direct wave is deduced. By using the LMS adaptive FIR filter, the software sol...The way to use the least-mean-square (LMS) arithmetic to cancel the direct wave for a passive radar system is introduced. The model of the direct wave is deduced. By using the LMS adaptive FIR filter, the software solution for FM passive radar system is developed instead of the hardware consumption of the existent experiment system of passive radar. Further more some simulative results are given. The simulative results indicate that using LMS arithmetic to cancel the direct wave is effective.展开更多
The adaptive filtering algorithm with a fixed projection order is unable to adjust its performance in response to changes in the external environment of airborne radars.To overcome this limitation,a new approach is in...The adaptive filtering algorithm with a fixed projection order is unable to adjust its performance in response to changes in the external environment of airborne radars.To overcome this limitation,a new approach is introduced,which is the variable projection order Ekblom norm-promoted adaptive algorithm(VPO-EPAA).The method begins by examining the mean squared deviation(MSD)of the EPAA,deriving a formula for its MSD.Next,it compares the MSD of EPAA at two different projection orders and selects the one that minimizes the MSD as the parameter for the current iteration.Furthermore,the algorithm’s computational complexity is analyzed theoretically.Simulation results from system identification and self-interference cancellation show that the proposed algorithm performs exceptionally well in airborne radar signal self-interference cancellation,even under various noise intensities and types of interference.展开更多
Accurate and reliable photovoltaic(PV)modeling is crucial for the performance evaluation,control,and optimization of PV systems.However,existing methods for PV parameter identification often suffer from limitations in...Accurate and reliable photovoltaic(PV)modeling is crucial for the performance evaluation,control,and optimization of PV systems.However,existing methods for PV parameter identification often suffer from limitations in accuracy and efficiency.To address these challenges,we propose an adaptive multi-learning cooperation search algorithm(AMLCSA)for efficient identification of unknown parameters in PV models.AMLCSA is a novel algorithm inspired by teamwork behaviors in modern enterprises.It enhances the original cooperation search algorithm in two key aspects:(i)an adaptive multi-learning strategy that dynamically adjusts search ranges using adaptive weights,allowing better individuals to focus on local exploitation while guiding poorer individuals toward global exploration;and(ii)a chaotic grouping reflection strategy that introduces chaotic sequences to enhance population diversity and improve search performance.The effectiveness of AMLCSA is demonstrated on single-diode,double-diode,and three PV-module models.Simulation results show that AMLCSA offers significant advantages in convergence,accuracy,and stability compared to existing state-of-the-art algorithms.展开更多
For autonomous Unmanned Aerial Vehicles(UAVs)flying in real-world scenarios,time for path planning is always limited,which is a challenge known as the anytime problem.Anytime planners address this by finding a collisi...For autonomous Unmanned Aerial Vehicles(UAVs)flying in real-world scenarios,time for path planning is always limited,which is a challenge known as the anytime problem.Anytime planners address this by finding a collision-free path quickly and then improving it until time runs out,making UAVs more adaptable to different mission scenarios.However,current anytime algorithms based on A^(*)have insufficient control over the suboptimality bounds of paths and tend to lose their anytime properties in environments with large concave obstacles.This paper proposes a novel anytime path planning algorithm,Anytime Radiation A^(*)(ARa A^(*)),which can generate a series of suboptimal paths with improved bounds through decreasing search step sizes and can generate the optimal path when time is sufficient.The ARa A^(*)features two main innovations:an adaptive variable-step-size mechanism and elliptic constraints based on waypoints.The former helps achieve fast path searching in various environments.The latter allows ARa A^(*)to control the suboptimality bounds of paths and further enhance search efficiency.Simulation experiments show that the ARa A^(*)outperforms Anytime Repairing A^(*)(ARA^(*))and Anytime D^(*)(AD^(*))in controlling suboptimality bounds and planning time,especially in environments with large concave obstacles.Final flight experiments demonstrate that the paths planned by ARa A^(*)can ensure the safe flight of quadrotors.展开更多
Meshing temperature analyses of polymer gears reported in the literature mainly concern the effects of various material combinations and loading conditions,as their impacts could be seen in the first few meshing cycle...Meshing temperature analyses of polymer gears reported in the literature mainly concern the effects of various material combinations and loading conditions,as their impacts could be seen in the first few meshing cycles.However,the effects of tooth geometry parameters could manifest as the meshing cycles increase.This study investigated the effects of tooth geometry parameters on the multi-cycle meshing temperature of polyoxymethylene(POM)worm gears,aiming to control the meshing temperature elevation by tuning the tooth geometry.Firstly,a finite element(FE)model capable of separately calculating the heat generation and simulating the heat propagation was established.Moreover,an adaptive iteration algorithm was proposed within the FE framework to capture the influence of the heat generation variation from cycle to cycle.This algorithm proved to be feasible and highly efficient compared with experimental results from the literature and simulated results via the full-iteration algorithm.Multi-cycle meshing temperature analyses were conducted on a series of POM worm gears with different tooth geometry parameters.The results reveal that,within the range of 14.5°to 25°,a pressure angle of 25°is favorable for reducing the peak surface temperature and overall body temperature of POM worm gears,which influence flank wear and load-carrying capability,respectively.However,addendum modification should be weighed because it helps with load bearing but increases the risk of severe flank wear.This paper proposes an efficient iteration algorithm for multi-cycle meshing temperature analysis of polymer gears and proves the feasibility of controlling the meshing temperature elevation during multiple cycles by tuning tooth geometry.展开更多
To accomplish the reliability analyses of the correlation of multi-analytical objectives,an innovative framework of Dimensional Synchronous Modeling(DSM)and correlation analysis is developed based on the stepwise mode...To accomplish the reliability analyses of the correlation of multi-analytical objectives,an innovative framework of Dimensional Synchronous Modeling(DSM)and correlation analysis is developed based on the stepwise modeling strategy,cell array operation principle,and Copula theory.Under this framework,we propose a DSM-based Enhanced Kriging(DSMEK)algorithm to synchronously derive the modeling of multi-objective,and explore an adaptive Copula function approach to analyze the correlation among multiple objectives and to assess the synthetical reliability level.In the proposed DSMEK and adaptive Copula methods,the Kriging model is treated as the basis function of DSMEK model,the Multi-Objective Snake Optimizer(MOSO)algorithm is used to search the optimal values of hyperparameters of basis functions,the cell array operation principle is adopted to establish a whole model of multiple objectives,the goodness of fit is utilized to determine the forms of Copula functions,and the determined Copula functions are employed to perform the reliability analyses of the correlation of multi-analytical objectives.Furthermore,three examples,including multi-objective complex function approximation,aeroengine turbine bladeddisc multi-failure mode reliability analyses and aircraft landing gear system brake temperature reliability analyses,are performed to verify the effectiveness of the proposed methods,from the viewpoints of mathematics and engineering.The results show that the DSMEK and adaptive Copula approaches hold obvious advantages in terms of modeling features and simulation performance.The efforts of this work provide a useful way for the modeling of multi-analytical objectives and synthetical reliability analyses of complex structure/system with multi-output responses.展开更多
基金supported by the Foundation of Key Laboratory of Micro-inertial Instrument and Advanced Navigation Technology,Ministry of Education,Chinathe National Natural Science Foundation of China (61873064)
文摘Solar radio burst(SRB)is one of the main natural interference sources of Global Positioning System(GPS)signals and can reduce the signal-to-noise ratio(SNR),directly affecting the tracking performance of GPS receivers.In this paper,a tracking algorithm based on the adaptive Kalman filter(AKF)with carrier-to-noise ratio estimation is proposed and compared with the conventional second-order phase-locked loop tracking algo-rithms and the improved Sage-Husa adaptive Kalman filter(SHAKF)algorithm.It is discovered that when the SRBs occur,the improved SHAKF and the AKF with carrier-to-noise ratio estimation enable stable tracking to loop signals.The conven-tional second-order phase-locked loop tracking algorithms fail to track the receiver signal.The standard deviation of the carrier phase error of the AKF with carrier-to-noise ratio estimation out-performs 50.51%of the improved SHAKF algorithm,showing less fluctuation and better stability.The proposed algorithm is proven to show more excellent adaptability in the severe envi-ronment caused by the SRB occurrence and has better tracking performance.
基金Program for New Century Excellent Talents in Universities Under Grant No.NCET-04-0325
文摘Random vibration control is aimed at reproducing the power spectral density(PSD)at specified control points.The classical frequency-spectrum equalization algorithm needs to compute the average of the multiple frequency response functions(FRFs),which lengthens the control loop time in the equalization process.Likewise,the feedback control algorithm has a very slow convergence rate due to the small value of the feedback gain parameter to ensure stability of the system.To overcome these limitations,an adaptive inverse control of random vibrations based on the filtered-X least mean-square(LMS)algorithm is proposed.Furthermore,according to the description and iteration characteristics of random vibration tests in the frequency domain,the frequency domain LMS algorithm is adopted to refine the inverse characteristics of the FRF instead of the traditional time domain LMS algorithm.This inverse characteristic,which is called the impedance function of the system under control,is used to update the drive PSD directly.The test results indicated that in addition to successfully avoiding the instability problem that occurs during the iteration process,the adaptive control strategy minimizes the amount of time needed to obtain a short control loop and achieve equalization.
基金Project supported by the IRPA Secretariat, Ministry of Science,Technology and Environment of Malaysia (No. 04-02-02-0029) andthe Zamalah Scheme
文摘A Matrix Inversion Normalized Least Mean Square (MI-NLMS) adaptive beamforming algorithm was developed for smart antenna application. The MI-NLMS which combined the individual good aspects of Sample Matrix Inversion (SMI) and the Normalized Least Mean Square (NLMS) algorithms is described. Simulation results showed that the less complexity MI-NLMS yields 15 dB improvements in interference suppression and 5 dB gain enhancement over LMS algorithm, converges from the initial iteration and achieves 24% BER improvements at cochannel interference equal to 5. For the case of 4-element uniform linear array antenna, MI-NLMS achieved 76% BER reduction over LMS algorithm.
文摘An improved algorithm is presented to identify the secondary path based on the adaptive notch filter approach. Since the interference from the narrow band excitation signal is suppressed by the adaptive notch filter, the convergent speed of the on-line control path identification process is significantly improved. As a result, the controller performance is greatly enhanced. Besides the algorithm development, some important factors, such as the influence of reference signal on the controller convergent speed, are also discussed. The effectiveness of the algorithm is verified by experimental results.
文摘The least means squares （LMS） adaptive filter algorithm was used in active suspension system. By adjusting the weight of adaptive filter, the minimum quadratic performance index was obtained. For two-degree-of-freedom vehicle suspension model, LMS adaptive controller was designed. The acceleration of the sprung mass,the dynamic tyre load between wheels and road,and the dynamic deflection between sprung mass and unsprung mass were determined as the evaluation targets of suspension performance. For LMS adaptive control suspension, compared with passive suspension, acceleration power spectral density of sprung mass acceleration under the road input model decreased 8-10 times in high frequency resonance band or low frequency resonance band. The simulation results show that LMS adaptive control is simple and remarkably effective. It further proves that the active control suspension system can improve both the riding comfort and handling safety in various operation conditions, and the method is fit for the active control of the suspension system.
基金supported by the 2021 Open Project Fund of Science and Technology on Electromechanical Dynamic Control Laboratory,grant number 212-C-J-F-QT-2022-0020China Postdoctoral Science Foundation,grant number 2021M701713+1 种基金Postgraduate Research&Practice Innovation Program of Jiangsu Province,grant number KYCX23_0511the Jiangsu Funding Program for Excellent Postdoctoral Talent,grant number 20220ZB245。
文摘The phenomenon of a target echo peak overlapping with the backscattered echo peak significantly undermines the detection range and precision of underwater laser fuzes.To overcome this issue,we propose a four-quadrant dual-beam circumferential scanning laser fuze to distinguish various interference signals and provide more real-time data for the backscatter filtering algorithm.This enhances the algorithm loading capability of the fuze.In order to address the problem of insufficient filtering capacity in existing linear backscatter filtering algorithms,we develop a nonlinear backscattering adaptive filter based on the spline adaptive filter least mean square(SAF-LMS)algorithm.We also designed an algorithm pause module to retain the original trend of the target echo peak,improving the time discrimination accuracy and anti-interference capability of the fuze.Finally,experiments are conducted with varying signal-to-noise ratios of the original underwater target echo signals.The experimental results show that the average signal-to-noise ratio before and after filtering can be improved by more than31 d B,with an increase of up to 76%in extreme detection distance.
基金Natural Science Foundation of Shandong Province of China(No.ZR2012FM011)Shandong University of Science and Technology Research Fund(No.2010KYTD101)
文摘By analyzing algorithms available for variable step size least mean square(LMS)adaptive filter,a new modified LMS adaptive filtering algorithm with variable step size is proposed,along with performance analysis based on different parameters.Compared with the existing algorithms through the simulation,the proposed algorithm has faster convergence speed and smaller steady state error.
文摘In this paper, we consider the problem of unknown parameter estimation using a set of nodes that are deployed over an area. The recently proposed distributed adaptive estimation algorithms(also known as adaptive networks) are appealing solutions to the mentioned problem when the statistical information of the underlying process is not available or it varies over time. In this paper, our goal is to develop a new incremental least-mean square(LMS) adaptive network that considers the quality of measurements collected by the nodes. Thus, we use an adaptive combination strategy which assigns each node a step size according to its quality of measurement. The adaptive combination strategy improves the robustness of the proposed algorithm to the spatial variations of signal-to-noise ratio(SNR). The performance of our algorithm is more remarkable in inhomogeneous environments when there are some nodes with low SNRs in the network. The simulation results indicate the efficiency of the proposed algorithm.
基金Supported by the National Natural Science Foundation of China （No. 60532030）.
文摘Based on the good time-frequency localization of the wavelet packet modulation （WPM） system and the analysis of the muhitone （MT） interference, an improved WPM narrow band interference （NBI） rejection system using an adaptive least mean square （LMS） algorithm is discussed in this paper. In the WPM interference rejection system, according to the structure of the wavelet packet tree （WFF） and the characteristic of the MT interference, the demodulated WPM signal which contains the interference component is filtered using an adaptive LMS filtering implementation. Theoretical analysis and simulation resuits show that the proposed method improves the bit error rate （BER） performance of the WPM system in the presence of MT interference.
文摘In this paper,the inter-symbol interference and eliminating method are introduced.After analyzing the principle of adaptive equalization,we designed an adaptive equalizer using the LMS algorithm,and constructed a simulation system using MATLAB.Then we analyzed the convergence speed and mean square error characteristic of the adaptive equalizer by changing the step length factor to test the performance of the algorithm.
基金Supported by Natural Science Foundation of Beijing of China (No.2005AA501140)
文摘This paper puts forward a new variable step size LMS adaptive algorithm based on variable region. The step size p（k） in the algorithm varies with the variation of the region of deviation e （k） to ensure the optimization of the three performance objectives including initial convergent speed, trace ability of the time-varying system and steady disregulation. The paper demonstrates the convergence of the algorithm accompanied by random noise,
文摘外辐射源雷达利用直达天线接收的参考信号作为样本滤除目标回波中的杂波,但由于雨、云、树木或其他运动物体等的影响,回波内可能会包含非零频杂波,导致处理后杂波残余较大,影响目标检测。针对上述问题,提出了一种基于杂波识别的扩展最小均方(Least Mean Square,LMS)对消算法。首先利用模糊函数估计杂波的频率和时延分布,构建含频率信息的多个参考信号。再把多个参考信号插入LMS算法中推导了扩展LMS算法,利用扩展LMS算法可以同时对消静、动杂波。扩展LMS算法能降低对消剩余,提高目标的信噪比,仿真分析和实测数据处理验证了算法的有效性。
文摘Cloud computing has become an essential technology for the management and processing of large datasets,offering scalability,high availability,and fault tolerance.However,optimizing data replication across multiple data centers poses a significant challenge,especially when balancing opposing goals such as latency,storage costs,energy consumption,and network efficiency.This study introduces a novel Dynamic Optimization Algorithm called Dynamic Multi-Objective Gannet Optimization(DMGO),designed to enhance data replication efficiency in cloud environments.Unlike traditional static replication systems,DMGO adapts dynamically to variations in network conditions,system demand,and resource availability.The approach utilizes multi-objective optimization approaches to efficiently balance data access latency,storage efficiency,and operational costs.DMGO consistently evaluates data center performance and adjusts replication algorithms in real time to guarantee optimal system efficiency.Experimental evaluations conducted in a simulated cloud environment demonstrate that DMGO significantly outperforms conventional static algorithms,achieving faster data access,lower storage overhead,reduced energy consumption,and improved scalability.The proposed methodology offers a robust and adaptable solution for modern cloud systems,ensuring efficient resource consumption while maintaining high performance.
文摘The way to use the least-mean-square (LMS) arithmetic to cancel the direct wave for a passive radar system is introduced. The model of the direct wave is deduced. By using the LMS adaptive FIR filter, the software solution for FM passive radar system is developed instead of the hardware consumption of the existent experiment system of passive radar. Further more some simulative results are given. The simulative results indicate that using LMS arithmetic to cancel the direct wave is effective.
基金supported by the Shan⁃dong Provincial Natural Science Foundation(No.ZR2022MF314).
文摘The adaptive filtering algorithm with a fixed projection order is unable to adjust its performance in response to changes in the external environment of airborne radars.To overcome this limitation,a new approach is introduced,which is the variable projection order Ekblom norm-promoted adaptive algorithm(VPO-EPAA).The method begins by examining the mean squared deviation(MSD)of the EPAA,deriving a formula for its MSD.Next,it compares the MSD of EPAA at two different projection orders and selects the one that minimizes the MSD as the parameter for the current iteration.Furthermore,the algorithm’s computational complexity is analyzed theoretically.Simulation results from system identification and self-interference cancellation show that the proposed algorithm performs exceptionally well in airborne radar signal self-interference cancellation,even under various noise intensities and types of interference.
基金supported by the National Natural Science Foundation of China(Grant Nos.62303197,62273214)the Natural Science Foundation of Shandong Province(ZR2024MFO18).
文摘Accurate and reliable photovoltaic(PV)modeling is crucial for the performance evaluation,control,and optimization of PV systems.However,existing methods for PV parameter identification often suffer from limitations in accuracy and efficiency.To address these challenges,we propose an adaptive multi-learning cooperation search algorithm(AMLCSA)for efficient identification of unknown parameters in PV models.AMLCSA is a novel algorithm inspired by teamwork behaviors in modern enterprises.It enhances the original cooperation search algorithm in two key aspects:(i)an adaptive multi-learning strategy that dynamically adjusts search ranges using adaptive weights,allowing better individuals to focus on local exploitation while guiding poorer individuals toward global exploration;and(ii)a chaotic grouping reflection strategy that introduces chaotic sequences to enhance population diversity and improve search performance.The effectiveness of AMLCSA is demonstrated on single-diode,double-diode,and three PV-module models.Simulation results show that AMLCSA offers significant advantages in convergence,accuracy,and stability compared to existing state-of-the-art algorithms.
基金the support of the National Natural Science Foundation of China(No.52272382)the Aeronautical Science Foundation of China(No.20200017051001)the Fundamental Research Funds for the Central Universities,China。
文摘For autonomous Unmanned Aerial Vehicles(UAVs)flying in real-world scenarios,time for path planning is always limited,which is a challenge known as the anytime problem.Anytime planners address this by finding a collision-free path quickly and then improving it until time runs out,making UAVs more adaptable to different mission scenarios.However,current anytime algorithms based on A^(*)have insufficient control over the suboptimality bounds of paths and tend to lose their anytime properties in environments with large concave obstacles.This paper proposes a novel anytime path planning algorithm,Anytime Radiation A^(*)(ARa A^(*)),which can generate a series of suboptimal paths with improved bounds through decreasing search step sizes and can generate the optimal path when time is sufficient.The ARa A^(*)features two main innovations:an adaptive variable-step-size mechanism and elliptic constraints based on waypoints.The former helps achieve fast path searching in various environments.The latter allows ARa A^(*)to control the suboptimality bounds of paths and further enhance search efficiency.Simulation experiments show that the ARa A^(*)outperforms Anytime Repairing A^(*)(ARA^(*))and Anytime D^(*)(AD^(*))in controlling suboptimality bounds and planning time,especially in environments with large concave obstacles.Final flight experiments demonstrate that the paths planned by ARa A^(*)can ensure the safe flight of quadrotors.
基金Supported by National Key R&D Program of China(Grant No.2019YFE0121300)。
文摘Meshing temperature analyses of polymer gears reported in the literature mainly concern the effects of various material combinations and loading conditions,as their impacts could be seen in the first few meshing cycles.However,the effects of tooth geometry parameters could manifest as the meshing cycles increase.This study investigated the effects of tooth geometry parameters on the multi-cycle meshing temperature of polyoxymethylene(POM)worm gears,aiming to control the meshing temperature elevation by tuning the tooth geometry.Firstly,a finite element(FE)model capable of separately calculating the heat generation and simulating the heat propagation was established.Moreover,an adaptive iteration algorithm was proposed within the FE framework to capture the influence of the heat generation variation from cycle to cycle.This algorithm proved to be feasible and highly efficient compared with experimental results from the literature and simulated results via the full-iteration algorithm.Multi-cycle meshing temperature analyses were conducted on a series of POM worm gears with different tooth geometry parameters.The results reveal that,within the range of 14.5°to 25°,a pressure angle of 25°is favorable for reducing the peak surface temperature and overall body temperature of POM worm gears,which influence flank wear and load-carrying capability,respectively.However,addendum modification should be weighed because it helps with load bearing but increases the risk of severe flank wear.This paper proposes an efficient iteration algorithm for multi-cycle meshing temperature analysis of polymer gears and proves the feasibility of controlling the meshing temperature elevation during multiple cycles by tuning tooth geometry.
基金co-supported by the National Natural Science Foundation of China(Nos.52405293,52375237)China Postdoctoral Science Foundation(No.2024M754219)Shaanxi Province Postdoctoral Research Project Funding,China。
文摘To accomplish the reliability analyses of the correlation of multi-analytical objectives,an innovative framework of Dimensional Synchronous Modeling(DSM)and correlation analysis is developed based on the stepwise modeling strategy,cell array operation principle,and Copula theory.Under this framework,we propose a DSM-based Enhanced Kriging(DSMEK)algorithm to synchronously derive the modeling of multi-objective,and explore an adaptive Copula function approach to analyze the correlation among multiple objectives and to assess the synthetical reliability level.In the proposed DSMEK and adaptive Copula methods,the Kriging model is treated as the basis function of DSMEK model,the Multi-Objective Snake Optimizer(MOSO)algorithm is used to search the optimal values of hyperparameters of basis functions,the cell array operation principle is adopted to establish a whole model of multiple objectives,the goodness of fit is utilized to determine the forms of Copula functions,and the determined Copula functions are employed to perform the reliability analyses of the correlation of multi-analytical objectives.Furthermore,three examples,including multi-objective complex function approximation,aeroengine turbine bladeddisc multi-failure mode reliability analyses and aircraft landing gear system brake temperature reliability analyses,are performed to verify the effectiveness of the proposed methods,from the viewpoints of mathematics and engineering.The results show that the DSMEK and adaptive Copula approaches hold obvious advantages in terms of modeling features and simulation performance.The efforts of this work provide a useful way for the modeling of multi-analytical objectives and synthetical reliability analyses of complex structure/system with multi-output responses.
