Acoustic vector sensor consists of pressure and particle velocity sensors,which measure the three-dimensional acoustic particle velocity,as well as the pressure at one location at the same time.By preserving the ampli...Acoustic vector sensor consists of pressure and particle velocity sensors,which measure the three-dimensional acoustic particle velocity,as well as the pressure at one location at the same time.By preserving the amplitude and phase information of the pressure and particle velocity,they possess a number of advantages over traditional scalar sensors.Signal-to-noise ratio (SNR) gain (which is often called array gain) is one of such advantages and is always interested by all of us.But it is not unchangeable if the spatial correlation of the noise field varies.Much more important,it is difficult to be given if the noise becomes complex.In this paper,spatial correlation of the vector field of isotropic volume-noise and surface-generated noise has been introduced briefly.Based on the results,the combined SNR output of a vector linear array is investigated and the maximum gain is given in the specified noise.Computer simulation shows that the output of one array in the same noise is not the same in different gestures.And then we find the best gesture through SNR calculation and obtain the biggest gain,which has important meaning to guide how to deploy an array in practice.We also should use the array with respect to the characteristics of the real ambient noise,especially in anisotropic noise field.展开更多
An acoustic vector sensor can measure the components of particle velocity and the acoustic pressure at the same point simultaneously, which provides a larger array gain against the ambient noise and a higher angular r...An acoustic vector sensor can measure the components of particle velocity and the acoustic pressure at the same point simultaneously, which provides a larger array gain against the ambient noise and a higher angular resolution than the omnidirectional pressure sensor. This paper presents an experimental study of array gain for a conformal acoustic vector sensor array in a practical environment. First, the manifold vector is calculated using the real measured data so that the effects of array mismatches can be minimized. Second, an optimal beamformer with a specific spatial response on the basis of the stable directivity of the ambient noise is designed, which can effectively suppress the ambient noise. Experimental results show that this beamformer for the conformal acoustic vector sensor array provides good signal-to- noise ratio enhancement and is more advantageous than the delay-and-sum and minimum variance distortionless response beamformers.展开更多
In order to ease the pass-band response distortion of the matrix pre-filter,a simple approach for designing matrix spatial filter is proposed,which minimizes the sum of the k maximal distortion norm（k is the number o...In order to ease the pass-band response distortion of the matrix pre-filter,a simple approach for designing matrix spatial filter is proposed,which minimizes the sum of the k maximal distortion norm（k is the number of the constraint points）within the pass-band,while constraining the filter response within the stop-band.Considering the costly amount of calculation of the high-resolution methods,an algorithm with small amount of calculation based on matrix pre-filtering and subspace fitting using acoustic vector array（MF-VSSF）is proposed.Through joint processing of signal subspace of both pressure and particle velocity,the pre-filtering matrix and the signal subspace is decreased to M-dimensional（M is the number of array-element）,hence reduces the time-consumption of the matrix pre-filter design and DOA searching.Simulation results show that,the method offers the same performance as MUSIC with pre-filtering,but has much lesser amount of calculation.Moreover,the designed prefilter can efficiently suppress the interference in the stop-band and improve the estimation and resolution performance of successive DOA estimators.展开更多
An acoustic vector sensor(AVS)can capture more information than a conventional acoustic pressure sensor(APS).As a result,more output channels are required when multiple AVS are formed into arrays,making processing the...An acoustic vector sensor(AVS)can capture more information than a conventional acoustic pressure sensor(APS).As a result,more output channels are required when multiple AVS are formed into arrays,making processing the data stream computationally intense.This paper proposes a new algorithm based on the propagator method for wideband coherent sources that eliminates eigen-decomposition in order to reduce the computational burden.Data from simulations and lake trials showed that the new algorithm is valid:it resolves coherent sources,breaks left/right ambiguity,and allows inter element spacing to exceed a half-wavelength.展开更多
This work investigates the direction-of-arrival(DOA) estimation for a uniform circular acoustic Vector-Sensor Array(UCAVSA) mounted around a cylindrical baffle.The total pressure field and the total particle velocity ...This work investigates the direction-of-arrival(DOA) estimation for a uniform circular acoustic Vector-Sensor Array(UCAVSA) mounted around a cylindrical baffle.The total pressure field and the total particle velocity field near the surface of the cylindrical baffle are analyzed theoretically by applying the method of spatial Fourier transform.Then the so-called modal vector-sensor array signal processing algorithm,which is based on the decomposed wavefield representations,for the UCAVSA mounted around the cylindrical baffle is proposed.Simulation and experimental results show that the UCAVSA mounted around the cylindrical baffle has distinct advantages over the same manifold of traditional uniform circular pressure-sensor array(UCPSA).It is pointed out that the acoustic Vector-Sensor(AVS) could be used under the condition of the cylindrical baffle and that the UCAVSA mounted around the cylindrical baffle could also combine the anti-noise performance of the AVS with spatial resolution performance of array system by means of modal vector-sensor array signal processing algorithms.展开更多
In this work,acoustic vector characteristics of near fields scattered by an underwater finite cylindrical baffle are investigated theoretically and experimentally.The analytic expressions for the scattered pressure an...In this work,acoustic vector characteristics of near fields scattered by an underwater finite cylindrical baffle are investigated theoretically and experimentally.The analytic expressions for the scattered pressure and particle velocity are derived using the elastic thin shell theory.Calculations are presented for the scattered near fields of the pressure,the particle velocity and the intensity.It is found that the pressure and the particle velocity fields near the surface of the cylindrical baffle are characterized by complex interference structure,particle velocity directions and the source bearings are not consistent.The phase difference between the pressure and the particle velocity is not zero and the intensity vector does not reflect the sound bearings.It can be noted that the distortions of the fields will make the original vector signal processing method based on the free space assumption be no longer applicable in the presence of the cylindrical baffle.These results can serve as a basis of the application for the acoustic vector sensor on board.展开更多
This paper describes recent device developments with relaxor ferroelectric Pb(Zn_(1/3)Nb_(2/3))O_(3)-PbTiO_(3)(PZN–PT)single crystals carried out at Microfine Materials Technologies Pte.Ltd,Singapore.Promising[011]-p...This paper describes recent device developments with relaxor ferroelectric Pb(Zn_(1/3)Nb_(2/3))O_(3)-PbTiO_(3)(PZN–PT)single crystals carried out at Microfine Materials Technologies Pte.Ltd,Singapore.Promising[011]-poled transverse cuts of PZN–PT single crystals and the results on the effect of electric field and axial compressive stress on the rhombohedral-to-orthorhombic(R–O)phase transformation behavior of such cuts are presented and discussed.The single crystal devices described include a compact lowfrequency broadband power-efficient underwater tonpilz projector,high sensitivity shear accelerometers and acoustic vector sensors(AVS).The unique characteristics offered by these PZN–PT single crystal devices are highlighted,which serve as examples of newgeneration piezoelectric devices and systems for a wide range of demanding applications.展开更多
基金Supported by the National Natural Science Foundation of China under Grant No.50909028
文摘Acoustic vector sensor consists of pressure and particle velocity sensors,which measure the three-dimensional acoustic particle velocity,as well as the pressure at one location at the same time.By preserving the amplitude and phase information of the pressure and particle velocity,they possess a number of advantages over traditional scalar sensors.Signal-to-noise ratio (SNR) gain (which is often called array gain) is one of such advantages and is always interested by all of us.But it is not unchangeable if the spatial correlation of the noise field varies.Much more important,it is difficult to be given if the noise becomes complex.In this paper,spatial correlation of the vector field of isotropic volume-noise and surface-generated noise has been introduced briefly.Based on the results,the combined SNR output of a vector linear array is investigated and the maximum gain is given in the specified noise.Computer simulation shows that the output of one array in the same noise is not the same in different gestures.And then we find the best gesture through SNR calculation and obtain the biggest gain,which has important meaning to guide how to deploy an array in practice.We also should use the array with respect to the characteristics of the real ambient noise,especially in anisotropic noise field.
基金Project supported by the China Postdoctoral Science Foundation(Grant No.2016M592782)the National Natural Science Foundation of China(Grant Nos.11274253 and 11604259)
文摘An acoustic vector sensor can measure the components of particle velocity and the acoustic pressure at the same point simultaneously, which provides a larger array gain against the ambient noise and a higher angular resolution than the omnidirectional pressure sensor. This paper presents an experimental study of array gain for a conformal acoustic vector sensor array in a practical environment. First, the manifold vector is calculated using the real measured data so that the effects of array mismatches can be minimized. Second, an optimal beamformer with a specific spatial response on the basis of the stable directivity of the ambient noise is designed, which can effectively suppress the ambient noise. Experimental results show that this beamformer for the conformal acoustic vector sensor array provides good signal-to- noise ratio enhancement and is more advantageous than the delay-and-sum and minimum variance distortionless response beamformers.
基金supported by the National Natural Science Foundation of China(61201411)
文摘In order to ease the pass-band response distortion of the matrix pre-filter,a simple approach for designing matrix spatial filter is proposed,which minimizes the sum of the k maximal distortion norm（k is the number of the constraint points）within the pass-band,while constraining the filter response within the stop-band.Considering the costly amount of calculation of the high-resolution methods,an algorithm with small amount of calculation based on matrix pre-filtering and subspace fitting using acoustic vector array（MF-VSSF）is proposed.Through joint processing of signal subspace of both pressure and particle velocity,the pre-filtering matrix and the signal subspace is decreased to M-dimensional（M is the number of array-element）,hence reduces the time-consumption of the matrix pre-filter design and DOA searching.Simulation results show that,the method offers the same performance as MUSIC with pre-filtering,but has much lesser amount of calculation.Moreover,the designed prefilter can efficiently suppress the interference in the stop-band and improve the estimation and resolution performance of successive DOA estimators.
基金the National 863 Plan Project of Ministry of Science and Technology of China under Grant No.2006AA09Z234
文摘An acoustic vector sensor(AVS)can capture more information than a conventional acoustic pressure sensor(APS).As a result,more output channels are required when multiple AVS are formed into arrays,making processing the data stream computationally intense.This paper proposes a new algorithm based on the propagator method for wideband coherent sources that eliminates eigen-decomposition in order to reduce the computational burden.Data from simulations and lake trials showed that the new algorithm is valid:it resolves coherent sources,breaks left/right ambiguity,and allows inter element spacing to exceed a half-wavelength.
基金supported by the Special Foundation for State Major Basic Research Program of China (Grant No. 40827003)
文摘This work investigates the direction-of-arrival(DOA) estimation for a uniform circular acoustic Vector-Sensor Array(UCAVSA) mounted around a cylindrical baffle.The total pressure field and the total particle velocity field near the surface of the cylindrical baffle are analyzed theoretically by applying the method of spatial Fourier transform.Then the so-called modal vector-sensor array signal processing algorithm,which is based on the decomposed wavefield representations,for the UCAVSA mounted around the cylindrical baffle is proposed.Simulation and experimental results show that the UCAVSA mounted around the cylindrical baffle has distinct advantages over the same manifold of traditional uniform circular pressure-sensor array(UCPSA).It is pointed out that the acoustic Vector-Sensor(AVS) could be used under the condition of the cylindrical baffle and that the UCAVSA mounted around the cylindrical baffle could also combine the anti-noise performance of the AVS with spatial resolution performance of array system by means of modal vector-sensor array signal processing algorithms.
基金supported by the Special Foundation for the State Major Basic Research Program of China (Grant No. 40827003)
文摘In this work,acoustic vector characteristics of near fields scattered by an underwater finite cylindrical baffle are investigated theoretically and experimentally.The analytic expressions for the scattered pressure and particle velocity are derived using the elastic thin shell theory.Calculations are presented for the scattered near fields of the pressure,the particle velocity and the intensity.It is found that the pressure and the particle velocity fields near the surface of the cylindrical baffle are characterized by complex interference structure,particle velocity directions and the source bearings are not consistent.The phase difference between the pressure and the particle velocity is not zero and the intensity vector does not reflect the sound bearings.It can be noted that the distortions of the fields will make the original vector signal processing method based on the free space assumption be no longer applicable in the presence of the cylindrical baffle.These results can serve as a basis of the application for the acoustic vector sensor on board.
文摘This paper describes recent device developments with relaxor ferroelectric Pb(Zn_(1/3)Nb_(2/3))O_(3)-PbTiO_(3)(PZN–PT)single crystals carried out at Microfine Materials Technologies Pte.Ltd,Singapore.Promising[011]-poled transverse cuts of PZN–PT single crystals and the results on the effect of electric field and axial compressive stress on the rhombohedral-to-orthorhombic(R–O)phase transformation behavior of such cuts are presented and discussed.The single crystal devices described include a compact lowfrequency broadband power-efficient underwater tonpilz projector,high sensitivity shear accelerometers and acoustic vector sensors(AVS).The unique characteristics offered by these PZN–PT single crystal devices are highlighted,which serve as examples of newgeneration piezoelectric devices and systems for a wide range of demanding applications.
