This paper reports the effect of cooling rate on the microstructure and hardness of a kind of medium carbon steel microalloyed with two levels of V content （0.15% and 0.28%） after hot deformation by using single com...This paper reports the effect of cooling rate on the microstructure and hardness of a kind of medium carbon steel microalloyed with two levels of V content （0.15% and 0.28%） after hot deformation by using single compression tests on a Gleeble-3800 thermal simulator. The results show that cooling rate has a significant effect on the microstructure and hardness of the tested steels. Both the fraction of pearlite and hardness increase with increasing cooling rate, whereas a further increase of the cooling rate above a critical value promotes the formation of acicular ferrite （AF）, and thus leads to a decrease of hardness mainly owing to the decrease of pearlite fraction and replacing it by AF and the less effective precipita- tion strengthening. Increasing V content results in a significant increase of hardness, and this tendency enhances with increasing cooling rate until the formation of AF. Furthermore, increasing V content also significantly enhances the formation of AF structure at a lower cooling rate. The results also suggest that by controlling microstructure, especially the precipitation of fine V（C,N） particles through adjusting post- forging cooling, the strengthening and gradient function in one hot-forging part could be obtained.展开更多
The transformation productions of hot-deformation simulation experiments were investigated using a Gleeble-1500 hot simulator for a commercial pipeline steel. Based on the investigation results, the improved thermo-me...The transformation productions of hot-deformation simulation experiments were investigated using a Gleeble-1500 hot simulator for a commercial pipeline steel. Based on the investigation results, the improved thermo-mechanical control processing (TMCP) schedules containing a two stage multi-pass controlled rolling coupled with moderate cooling rates were applied to hot rolling experiments and acicular ferrite dominated microstructure was obtained. Microstructures and mechanical properties of hot rolled plates were related to TMCP processing, and regression equations describing the relation between processing parameters and mechanical properties in the current TMCP were developed, which could be used to predict mechanical properties of the experimental steel during commercially processing. It was found that with an increase in cooling rate after hot rolling, grain size in the microstructure became smaller, the amount of polygonal ferrite decreased and acicular ferrite increased, and accordingly mechanical properties increased.展开更多
基金financially supported by the National HighTechnology Research&Development Program of China(No.2013AA031605)
文摘This paper reports the effect of cooling rate on the microstructure and hardness of a kind of medium carbon steel microalloyed with two levels of V content （0.15% and 0.28%） after hot deformation by using single compression tests on a Gleeble-3800 thermal simulator. The results show that cooling rate has a significant effect on the microstructure and hardness of the tested steels. Both the fraction of pearlite and hardness increase with increasing cooling rate, whereas a further increase of the cooling rate above a critical value promotes the formation of acicular ferrite （AF）, and thus leads to a decrease of hardness mainly owing to the decrease of pearlite fraction and replacing it by AF and the less effective precipita- tion strengthening. Increasing V content results in a significant increase of hardness, and this tendency enhances with increasing cooling rate until the formation of AF. Furthermore, increasing V content also significantly enhances the formation of AF structure at a lower cooling rate. The results also suggest that by controlling microstructure, especially the precipitation of fine V（C,N） particles through adjusting post- forging cooling, the strengthening and gradient function in one hot-forging part could be obtained.
文摘The transformation productions of hot-deformation simulation experiments were investigated using a Gleeble-1500 hot simulator for a commercial pipeline steel. Based on the investigation results, the improved thermo-mechanical control processing (TMCP) schedules containing a two stage multi-pass controlled rolling coupled with moderate cooling rates were applied to hot rolling experiments and acicular ferrite dominated microstructure was obtained. Microstructures and mechanical properties of hot rolled plates were related to TMCP processing, and regression equations describing the relation between processing parameters and mechanical properties in the current TMCP were developed, which could be used to predict mechanical properties of the experimental steel during commercially processing. It was found that with an increase in cooling rate after hot rolling, grain size in the microstructure became smaller, the amount of polygonal ferrite decreased and acicular ferrite increased, and accordingly mechanical properties increased.
