The AC/DC hybrid distribution network is one of the trends in distribution network development, which poses great challenges to the traditional distribution transformer. In this paper, a new topology suitable for AC/D...The AC/DC hybrid distribution network is one of the trends in distribution network development, which poses great challenges to the traditional distribution transformer. In this paper, a new topology suitable for AC/DC hybrid distribution network is put forward according to the demands of power grid, with advantages of accepting DG and DC loads, while clearing DC fault by blocking the clamping double sub-module(CDSM) of input stage. Then, this paper shows the typical structure of AC/DC distribution network that is hand in hand. Based on the new topology, this paper designs the control and modulation strategies of each stage, where the outer loop controller of input stage is emphasized for its twocontrol mode. At last, the rationality of new topology and the validity of control strategies are verified by the steady and dynamic state simulation. At the same time, the simulation results highlight the role of PET in energy regulation.展开更多
This paper presents performance analysis on hybrid AC/DC microgrid networks for residential home cluster. The design of the proposed microgrid includes comprehensive types of Distributed Generators (DGs) as hybrid pow...This paper presents performance analysis on hybrid AC/DC microgrid networks for residential home cluster. The design of the proposed microgrid includes comprehensive types of Distributed Generators (DGs) as hybrid power sources (wind, Photovoltaic (PV) solar cell, battery, fuel cell). Details about each DG dynamic modeling are presented and discussed. The customers in home cluster can be connected in both of the operating modes: islanded to the microgrid or connected to utility grid. Each DG has appended control system with its modeling that will be discussed to control DG performance. The wind turbine will be controlled by AC control system within three sub-control systems: 1) speed regulator and pitch control, 2) rotor side converter control, and 3) grid side converter control. The AC control structure is based on PLL, current regulator and voltage booster converter with using of photovoltaic Voltage Source Converter (VSC) and inverters to connect to the grid. The DC control system is mainly based on Maximum Power Point Tracking (MPPT) controller and boost converter connected to the PV array block and in order to control the system. The case study is used to analyze the performance of the proposed microgrid. The buses voltages, active power and reactive power responses are presented in both of grid-connected and islanded modes. In addition, the power factor, Total Harmonic Distortion (THD) and modulation index are calculated.展开更多
该文提出一种基于双辅助网络(dual auxiliary network,DAN)的宽软开关范围周波变换类型的高频链逆变(cycloconverter-type high frequency link inverter,CHFLI)电路,简称DAN-CHFLI电路。原边侧采用对称型无源辅助网络(passive auxiliar...该文提出一种基于双辅助网络(dual auxiliary network,DAN)的宽软开关范围周波变换类型的高频链逆变(cycloconverter-type high frequency link inverter,CHFLI)电路,简称DAN-CHFLI电路。原边侧采用对称型无源辅助网络(passive auxiliary network,PAN)解决了传统CHFLI电路在空载、轻载及输出电压较小时原边侧开关管无法实现软开关的问题,拓宽了软开关范围,保证了其在任意负载条件下的零电压导通(zero voltage switching,ZVS)。副边侧有源辅助网络(active auxiliary network,AAN)由钳位电容和H桥组成,可以解决漏感与开关管寄生电容谐振造成的电压振荡问题,并辅助周波变换器换流。针对AAN电路,提出一种移相钳位策略:AAN开关管与原边开关管类似,也采用固定占空比方波信号移相调制;且相比原边开关管,AAN开关管延迟导通以实现软开关。文中详细分析了DAN-CHFLI拓扑结构、换流过程、PAN和AAN工作原理及开关管的软开关特性,并设计实验样机验证了理论分析的正确性。展开更多
基金supported by National Key Research and Development Program of China (2016YFB0900500,2017YFB0903100)the State Grid Science and Technology Project (SGRI-DL-F1-51-011)
文摘The AC/DC hybrid distribution network is one of the trends in distribution network development, which poses great challenges to the traditional distribution transformer. In this paper, a new topology suitable for AC/DC hybrid distribution network is put forward according to the demands of power grid, with advantages of accepting DG and DC loads, while clearing DC fault by blocking the clamping double sub-module(CDSM) of input stage. Then, this paper shows the typical structure of AC/DC distribution network that is hand in hand. Based on the new topology, this paper designs the control and modulation strategies of each stage, where the outer loop controller of input stage is emphasized for its twocontrol mode. At last, the rationality of new topology and the validity of control strategies are verified by the steady and dynamic state simulation. At the same time, the simulation results highlight the role of PET in energy regulation.
文摘This paper presents performance analysis on hybrid AC/DC microgrid networks for residential home cluster. The design of the proposed microgrid includes comprehensive types of Distributed Generators (DGs) as hybrid power sources (wind, Photovoltaic (PV) solar cell, battery, fuel cell). Details about each DG dynamic modeling are presented and discussed. The customers in home cluster can be connected in both of the operating modes: islanded to the microgrid or connected to utility grid. Each DG has appended control system with its modeling that will be discussed to control DG performance. The wind turbine will be controlled by AC control system within three sub-control systems: 1) speed regulator and pitch control, 2) rotor side converter control, and 3) grid side converter control. The AC control structure is based on PLL, current regulator and voltage booster converter with using of photovoltaic Voltage Source Converter (VSC) and inverters to connect to the grid. The DC control system is mainly based on Maximum Power Point Tracking (MPPT) controller and boost converter connected to the PV array block and in order to control the system. The case study is used to analyze the performance of the proposed microgrid. The buses voltages, active power and reactive power responses are presented in both of grid-connected and islanded modes. In addition, the power factor, Total Harmonic Distortion (THD) and modulation index are calculated.
文摘该文提出一种基于双辅助网络(dual auxiliary network,DAN)的宽软开关范围周波变换类型的高频链逆变(cycloconverter-type high frequency link inverter,CHFLI)电路,简称DAN-CHFLI电路。原边侧采用对称型无源辅助网络(passive auxiliary network,PAN)解决了传统CHFLI电路在空载、轻载及输出电压较小时原边侧开关管无法实现软开关的问题,拓宽了软开关范围,保证了其在任意负载条件下的零电压导通(zero voltage switching,ZVS)。副边侧有源辅助网络(active auxiliary network,AAN)由钳位电容和H桥组成,可以解决漏感与开关管寄生电容谐振造成的电压振荡问题,并辅助周波变换器换流。针对AAN电路,提出一种移相钳位策略:AAN开关管与原边开关管类似,也采用固定占空比方波信号移相调制;且相比原边开关管,AAN开关管延迟导通以实现软开关。文中详细分析了DAN-CHFLI拓扑结构、换流过程、PAN和AAN工作原理及开关管的软开关特性,并设计实验样机验证了理论分析的正确性。
