Here we present a novel approach of intercritical heat treatment for microstructure tailoring,in which intercritical annealing is introduced between conventional quenching and tempering.This induced a heterogeneous mi...Here we present a novel approach of intercritical heat treatment for microstructure tailoring,in which intercritical annealing is introduced between conventional quenching and tempering.This induced a heterogeneous microstructure consisting of soft intercritical ferrite and hard tempered martensite,resulting in a low yield ratio(YR)and high impact toughness in a high-strength low-alloy steel.The initial yielding and subsequent work hardening behavior of the steel during tensile deformation were modified by the presence of soft intercritical ferrite after intercritical annealing,in comparison to the steel with full martensitic microstructure.The increase in YR was related to the reduction in hardness difference between the soft and hard phases due to the precipitation of nano-carbides and the recovery of dislocations during tempering.The excellent low-temperature toughness was ascribed not only to the decrease in probability of microcrack initiation for the reduction of hardness difference between two phases,but also to the increase in resistance of microcrack propagation caused by the high density of high angle grain boundaries.展开更多
Deep drawing properties of hot rolled gas cylinder steel was investigated by using HP295 steel in terms of microstructure,texture,yield ratio,plastic strain ratio(r value)and plastic anisotropy(Ar).The grains in the h...Deep drawing properties of hot rolled gas cylinder steel was investigated by using HP295 steel in terms of microstructure,texture,yield ratio,plastic strain ratio(r value)and plastic anisotropy(Ar).The grains in the hot strip were largely equiaxed,and the texture was weak,containing a-and?'fibre.Reheating temperature,finish roll ing temperature and cooling rate after rolling influenced the ferrite-pearlite band formation significantly,and the yield ratio increased steeply with decreasing coiling temperature below 630~C.The anisotropy is relatively high due to re-tained severe ferrite-pearlite band.A mechanism of the band formation due to manganese segregation is elaborated and confirmed validly,from which the measures to avoid the band formation are worked out.Rolling parameters have been optimized by the measures,and industrial production of the gas cylinder steel has been made possible with much improved r-and△r-values,while meeting other specifications.展开更多
Effect of different cooling history on yield ratio of HP295 steel for welded gas cylinder was studied and the result implied that both fine microstructure and good mechanical properties can be attained by using two-st...Effect of different cooling history on yield ratio of HP295 steel for welded gas cylinder was studied and the result implied that both fine microstructure and good mechanical properties can be attained by using two-stage cooling and controlling the coiling temperature. The yield ratio of HP295 steel sheet was reduced to less than 0.8 by twostage cooling process. The pass percent of yield ratio was enhanced from less than 90% to 100%. The mechanical properties satisfied the criteria of GB6653-1994.展开更多
Various hot rolling schedules were applied to a Nb,V,Ti contained HSLA steel.Coiling temperature had crucial effects on not only yield strength,but also yield ratio and precipitation behavior.600Mpa yield strength is ...Various hot rolling schedules were applied to a Nb,V,Ti contained HSLA steel.Coiling temperature had crucial effects on not only yield strength,but also yield ratio and precipitation behavior.600Mpa yield strength is achieved when coiled at 450℃,which is 100Mpa higher than those coiled at 570℃.However,the low coiling temperature had adverse effect to increase yield ratio,which increased from 0.78 to 0.88 as coiling temperature dropped from 570℃to 450℃.High resolution SEM analysis shows that sizes of Nb,V,Ti precipitates are affected by coiling temperature.Coarse(Nb,Ti)(C,N)precipitates up to 5μm are observed at higher coiling temperature and to decrease tensile strength,where high coiling temperature corresponds to low cooling rate.With strong cooling and coiling capacity of Shasteel’s 1450mm width hot rolling mill,these results indicate that strength and formability of the steel can be balanced when coiling temperature has been optimized.Alloying and microalloying costs can be reduced by efficiently utilizing the capacity of rolling mill.Alumina inclusions are found to act as nucleus for Nb,V,Ti precipitates,contributing to coarsening of precipitates.展开更多
This study focuses on developing a novel multiphase stainless steel with enhanced ductility and an ultralow yield ratio achieved through solid-solution treatment.The steel exhibits remarkable mechanical properties:a t...This study focuses on developing a novel multiphase stainless steel with enhanced ductility and an ultralow yield ratio achieved through solid-solution treatment.The steel exhibits remarkable mechanical properties:a tensile strength of approximately 1114 MPa,an ultralow yield ratio of 0.36,exceptional uniform elongation of approximately 17.48%,and total elongation of approximately 21.73%.The remarkable ductility of the steel can be attributed to the transformation-induced plasticity(TRIP)effect observed in the retained austenite,while its exceptional strength results from the combined effects of TRIP and the martensite phase.展开更多
The yield ratios of neutron-proton(R(n/p))and^(3)H-^(3)He(R(^(3)H∕^(3)He))with reduced rapidity from 0 to 0.5 were simulated at 50 MeV/u even-even ^(36−56)Ca+^(40)Ca,even-even ^(48−78)Ni+^(58)Ni,and ^(100−139)Sn(ever...The yield ratios of neutron-proton(R(n/p))and^(3)H-^(3)He(R(^(3)H∕^(3)He))with reduced rapidity from 0 to 0.5 were simulated at 50 MeV/u even-even ^(36−56)Ca+^(40)Ca,even-even ^(48−78)Ni+^(58)Ni,and ^(100−139)Sn(every third isotopes)+112 Sn for full reduced impact parameters using the isospin-dependent quantum molecular dynamics(IQMD)model.The neutron and proton density distributions and root-mean-square radii of the reaction systems were obtained using the Skyrme-Hartree-Fock model,which was used for the phase space initialization of the projectile and target in IQMD.We defined the unified neutron skin thickness asΔRnp=<r^(2)>^(1∕2) n−<r^(2)>^(1∕2)p,which was negative for neutron-deficient nuclei.The unifiedΔRnp values for nuclei with the same relative neutron excess from different isotopic chains were nearly equal,except for extreme neutron-rich isotopes,which is a type of scaling behavior.The yield ratios of the three isotopic chain-induced reactions,which depended on the reduced impact parameter and unified neutron skin thickness,were studied.The results showed that both R(n/p)and R(^(3)H∕^(3)He)decreased with a reduced impact parameter for extreme neutron-deficient isotopes;however,they increased with reduced impact parameters for extreme neutron-rich isotopes,and increased with theΔRnp of the projectiles for all reduced impact parameters.In addition,a scaling phenomenon was observed betweenΔR np and the yield ratios in peripheral colli-sions from different isotopic chain projectiles(except for extreme neutron-rich isotopes).Thus,R(n/p)and R(^(3)H∕^(3)He)from peripheral collisions were suggested as experimental probes for extracting the neutron or proton skin thicknesses of non-extreme neutron-rich nuclei from different isotopic chains.展开更多
The yield ratios of neutron/proton(R(n/p)) and ~3H=~3He(R(t/~3He)) with reduced rapidity from 0 to 0.5 are investigated for 50 MeV/u ^(42;44;46;48;50;52;54;56)Ca+^(40)Ca.This was conducted at whole reduced impact para...The yield ratios of neutron/proton(R(n/p)) and ~3H=~3He(R(t/~3He)) with reduced rapidity from 0 to 0.5 are investigated for 50 MeV/u ^(42;44;46;48;50;52;54;56)Ca+^(40)Ca.This was conducted at whole reduced impact parameters using the isospin-dependent quantum-molecular-dynamics model in which the initial neutron and proton densities are sampled within the Skyrme–Hartree–Fock model, using which the neutron skin thickness(△R_(np)) is determined for different neutron-rich Ca isotopes. The results show that both R(n/p) and R(t/~3He) have strong linear correlations with △R_(np) of different Ca isotopic projectiles from five different centralities. It is suggested that R(n/p) and R(t/~3He), from the same centrality, could be treated as possible experimental observables to extract the neutron skin or halo thickness for neutron-rich isotopic nuclei,including the nuclei near the neutron drip line.展开更多
The neutron-to-proton and3 H-to-3 He yield ratios, and the directed flows of particles dependent on a reduced rapidity, the transverse momentum per nucleon,and a reduced impact parameter are investigated for ^(28)S+^(...The neutron-to-proton and3 H-to-3 He yield ratios, and the directed flows of particles dependent on a reduced rapidity, the transverse momentum per nucleon,and a reduced impact parameter are investigated for ^(28)S+^(28)Si and ^(32)S+^(28)Si systems at 50 and 400 MeV/u using an isospin-dependent quantum molecular dynamics model.The results show that these yield ratios of projectile-like fragments are approximately equal to the constituent neutron-to-proton ratio of the projectile. There are clear differences of the directed flows for isospin-related fragments neutron and proton,~3H and ~3He from ^(28)S+^(28)Si collisions.The differences in directed flows for neutrons and protons and ~3H–~3He from a proton-rich nucleus ^(28)S- induced collisions are noticeably larger than those from a stable nucleus ^(32)S- induced reactions under medium impact parameters. Thus, the yield ratios and differences in directed flows for the neutrons and protons and ~3H–~3He under medium impact parameters are proposed as possible observable items for studying isospin physics.展开更多
A probe to extract the temperature(T_(iyr)) from intermediate-mass fragment has been proposed using the isobaric yield ratio(IYR) difference based on the modified Fisher model.By analyzing the isobaric cross section i...A probe to extract the temperature(T_(iyr)) from intermediate-mass fragment has been proposed using the isobaric yield ratio(IYR) difference based on the modified Fisher model.By analyzing the isobaric cross section in the measured 140 A MeV^(40,48)Ca+~9Be reactions,the Tiyr can well fit the IYR difference for the large mass fragments.Because of the fragments are produced in different colliding regions,it is also suggested to select the fragments according to different mechanisms when using TIYR.展开更多
We report our recent progress on the nuclear symmetry energy probe,which is called the isobaric yield ratio difference(IBD),and its application in neutron density determination in experiments.The results obtained by t...We report our recent progress on the nuclear symmetry energy probe,which is called the isobaric yield ratio difference(IBD),and its application in neutron density determination in experiments.The results obtained by the IBD,from which the isobaric yields in the measured 140 A MeV ^(40.48)Ca + ~9Be and ^(58.64)Ni + ~9Be reactions,and the calculated 80 A MeV ^(38-52)Ca +^(12)C reactions by using a modified statistical abrasion-ablation model,show the sensitivity of the IBD to the density differences between reactions.展开更多
This study uses the AMPT model in Au+Au collisions to study the influence of the three nucleon correlation C_(n^(2)p) on light nuclei yield ratios. Neglecting C_(n^(2)p) results in an overestimated relative neutron de...This study uses the AMPT model in Au+Au collisions to study the influence of the three nucleon correlation C_(n^(2)p) on light nuclei yield ratios. Neglecting C_(n^(2)p) results in an overestimated relative neutron density fluctuation extraction. In contrast, including C_(n^(2)p) enhances the agreement with experimental results with higher yield ratios but does not change the energy dependence of the yield ratio. Since the AMPT model does exhibit a first-order phase transition or critical physics, the study fails to reproduce the experimental energy-dependent peak around sNN1/2=20-30 GeV. The study'us findings might offer a baseline for investigating critical physics phenomena using light nuclei production as a probe.展开更多
The yield ratios of neutron/proton and ^3H/^3He and the directed flow per nucleon for these projectile-like fragments at large impact parameters are studied for ^50Ca ＋ ^40Ca and ^50Cr ＋ ^40Ca for comparison at 50 M...The yield ratios of neutron/proton and ^3H/^3He and the directed flow per nucleon for these projectile-like fragments at large impact parameters are studied for ^50Ca ＋ ^40Ca and ^50Cr ＋ ^40Ca for comparison at 50 MeV/u using the isospin-dependent quantum molecular dynamics（IQMD model.It is found that the yield ratios and the directed flows per nucleon are different for reactions induced by the neutron-rich nucleus ^50Ca and the stable isobaric nucleus ^50Cr,and depend on the hardness of the EOS.The ratios of neutron/proton and ^3H/^3He and the difference of directed flow per nucleon of neutron-proton are suggested to be possible observables to investigate the isospin effects.展开更多
The hit ratio of the yield strength of HRB400 D reinforced bar(Tangshan Iron and Steel Co.) is low. In this study, the effects of [C], [Mn], [Si], and [V] on the yield strength and mechanism were investigated. The HRB...The hit ratio of the yield strength of HRB400 D reinforced bar(Tangshan Iron and Steel Co.) is low. In this study, the effects of [C], [Mn], [Si], and [V] on the yield strength and mechanism were investigated. The HRB400 D reinforced bar with a specification of 22 spiral was chosen. A narrow composition control was achieved by reducing the lower limit of the Mn content and the amount of the alloying elements; moreover, the hit ratio of the reinforced bar yield strength increased from 65.54% to 96.27%, enhancing product stability. The cost of the steel alloy reduced by 8.86 RMB/ton, improving the market competitiveness of the product.展开更多
[Objective]The aim was to provide a theoretical basis for the rational configuration of ratio of row spacing to intrarow spacing(RS/IS)of double-cropping rice.[Methods]With early rice‘Ganxin 203’and‘Zhongjiazao 17...[Objective]The aim was to provide a theoretical basis for the rational configuration of ratio of row spacing to intrarow spacing(RS/IS)of double-cropping rice.[Methods]With early rice‘Ganxin 203’and‘Zhongjiazao 17’and late rice‘Ganxin 688’and‘Wufengyou T025’as materials,the effects of RS/IS on yield,nitrogen accumulation and utilization were studied in the same planting density of31.20×104hills/hm2.[Results]The results showed that yield of early rice was higher in RS/IS2.8(30.0 cm×10.7 cm)and RS/IS2.0(25.0 cm×12.8 cm)treatment,and lower in RS/IS5.0(40.0 cm×8.0 cm)and RS/IS1.3(20.0 cm×16.0 cm)treatment,while late rice were higher in RS/IS5.0and RS/IS2.0treatment,and lower in RS/IS2.8and RS/IS1.3treatment.Total nitrogen accumulation and apparent utilization ratio of nitrogen of early rice were higher in RS/IS2.0treatment and lower in RS/IS5.0treatment,while,for late rice were higher in RS/IS2.8treatment and lower in RS/IS5.0treatment.Nitrogen requirement for 100 kg grain production of early rice was higher in RS/IS1.3treatment and lower in RS/IS2.0treatment,while,for late rice were higher in RS/IS2.8treatment,lower in RS/IS5.0treatment.[Conclusion]In sum,4 varieties of early and late rice obtained higher yield in 25.0 cm×12.8 cm and lower yield in 20.0 cm×16.0 cm,and total nitrogen accumulation,nitrogen requirement for 100 kg grain production and apparent utilization ratio of nitrogen were all lower in 40.0 cm×8.0 cm.展开更多
[ Objectives ] The aim was to optimize the configuration of seedling density and line spacing of forage sweet sorghum （ Sorghum blcolor （ L. ） Moench） and explore its high-yield cultivation techniques. [ Methods] ...[ Objectives ] The aim was to optimize the configuration of seedling density and line spacing of forage sweet sorghum （ Sorghum blcolor （ L. ） Moench） and explore its high-yield cultivation techniques. [ Methods] Effects of such two influencing factors as line spacing and seedling density on the leaf-stem ratio, DW/FW ratio and grass yield of forage sweet sorghum were analyzed by using split-plot experiment design experiment method and LSD method of IBM. SPSS. Statis- tics. v22 stati, stics software. [ Results ~ Seedling density and line spacing had no obvious effect on the leaf-stem ratio and DW/FW ratio of forage sweet sorghum but had obvious influences on the grass yield. Moreover, the optimal combination of seedling density and line spacing for high yield of forage sweet sorghum was A2 B4, that is, seedling density was 225 000 plants/hm2, and line spacing was 40 cm. [ Conclusions] The results provided a theoretical basis and technical support for high-yield cultivation techniques of forage sweet sorghum.展开更多
Excessive use of N fertilizer in intensive agriculture can increase crop yield and at the same time cause high carbon（C） emissions.This study was conducted to determine optimized N fertilizer application for high gr...Excessive use of N fertilizer in intensive agriculture can increase crop yield and at the same time cause high carbon（C） emissions.This study was conducted to determine optimized N fertilizer application for high grain yield and lower C emissions in summer corn（Zea mays L.）.A field experiment, including 0（N0）, 75（N75）, 150（N150）, 225（N225）, and 300（N300） kg N ha–1 treatments, was carried out during 2010–2012 in the North China Plain（NCP）.The results showed that grain yield, input energy, greenhouse gas（GHG） emissions, and carbon footprint（CF） were all increased with the increase of N rate, except net energy yield（NEY）.The treatment of N225 had the highest grain yield（10 364.7 kg ha–1） and NEY（6.8%）, but the CF（0.25） was lower than that of N300, which indicates that a rate of 225 kg N ha–1 can be optimal for summer corn in NCP.Comparing GHG emision compontents, N fertilizer（0–51.1%） was the highest and followed by electricity for irrigation（19.73–49.35%）.We conclude that optimazing N fertilizer application rate and reducing electricity for irrigation are the two key measures to increase crop yield, improve energy efficiency and decrease GHG emissions in corn production.展开更多
基金This work was financially supported by the National Key Research and Development Program of China(No.2017YFB 0304800)One of the authors,H.Guo,would like to express her gratitude for the financial support of China Scholarship Council(award for one year visiting at Northwestern University in the USA,No.201706465056).
文摘Here we present a novel approach of intercritical heat treatment for microstructure tailoring,in which intercritical annealing is introduced between conventional quenching and tempering.This induced a heterogeneous microstructure consisting of soft intercritical ferrite and hard tempered martensite,resulting in a low yield ratio(YR)and high impact toughness in a high-strength low-alloy steel.The initial yielding and subsequent work hardening behavior of the steel during tensile deformation were modified by the presence of soft intercritical ferrite after intercritical annealing,in comparison to the steel with full martensitic microstructure.The increase in YR was related to the reduction in hardness difference between the soft and hard phases due to the precipitation of nano-carbides and the recovery of dislocations during tempering.The excellent low-temperature toughness was ascribed not only to the decrease in probability of microcrack initiation for the reduction of hardness difference between two phases,but also to the increase in resistance of microcrack propagation caused by the high density of high angle grain boundaries.
文摘Deep drawing properties of hot rolled gas cylinder steel was investigated by using HP295 steel in terms of microstructure,texture,yield ratio,plastic strain ratio(r value)and plastic anisotropy(Ar).The grains in the hot strip were largely equiaxed,and the texture was weak,containing a-and?'fibre.Reheating temperature,finish roll ing temperature and cooling rate after rolling influenced the ferrite-pearlite band formation significantly,and the yield ratio increased steeply with decreasing coiling temperature below 630~C.The anisotropy is relatively high due to re-tained severe ferrite-pearlite band.A mechanism of the band formation due to manganese segregation is elaborated and confirmed validly,from which the measures to avoid the band formation are worked out.Rolling parameters have been optimized by the measures,and industrial production of the gas cylinder steel has been made possible with much improved r-and△r-values,while meeting other specifications.
基金supported by the National High-Tech Re-search and Development Program of China(863 Program)(No.2001AA332020-01).
文摘Effect of different cooling history on yield ratio of HP295 steel for welded gas cylinder was studied and the result implied that both fine microstructure and good mechanical properties can be attained by using two-stage cooling and controlling the coiling temperature. The yield ratio of HP295 steel sheet was reduced to less than 0.8 by twostage cooling process. The pass percent of yield ratio was enhanced from less than 90% to 100%. The mechanical properties satisfied the criteria of GB6653-1994.
文摘Various hot rolling schedules were applied to a Nb,V,Ti contained HSLA steel.Coiling temperature had crucial effects on not only yield strength,but also yield ratio and precipitation behavior.600Mpa yield strength is achieved when coiled at 450℃,which is 100Mpa higher than those coiled at 570℃.However,the low coiling temperature had adverse effect to increase yield ratio,which increased from 0.78 to 0.88 as coiling temperature dropped from 570℃to 450℃.High resolution SEM analysis shows that sizes of Nb,V,Ti precipitates are affected by coiling temperature.Coarse(Nb,Ti)(C,N)precipitates up to 5μm are observed at higher coiling temperature and to decrease tensile strength,where high coiling temperature corresponds to low cooling rate.With strong cooling and coiling capacity of Shasteel’s 1450mm width hot rolling mill,these results indicate that strength and formability of the steel can be balanced when coiling temperature has been optimized.Alloying and microalloying costs can be reduced by efficiently utilizing the capacity of rolling mill.Alumina inclusions are found to act as nucleus for Nb,V,Ti precipitates,contributing to coarsening of precipitates.
基金financially supported by the National Science and Technology Resources Investigation Program of China(Grant No.2021FY100604).
文摘This study focuses on developing a novel multiphase stainless steel with enhanced ductility and an ultralow yield ratio achieved through solid-solution treatment.The steel exhibits remarkable mechanical properties:a tensile strength of approximately 1114 MPa,an ultralow yield ratio of 0.36,exceptional uniform elongation of approximately 17.48%,and total elongation of approximately 21.73%.The remarkable ductility of the steel can be attributed to the transformation-induced plasticity(TRIP)effect observed in the retained austenite,while its exceptional strength results from the combined effects of TRIP and the martensite phase.
基金supported by National Natural Science Foundation of China(No.11405025).
文摘The yield ratios of neutron-proton(R(n/p))and^(3)H-^(3)He(R(^(3)H∕^(3)He))with reduced rapidity from 0 to 0.5 were simulated at 50 MeV/u even-even ^(36−56)Ca+^(40)Ca,even-even ^(48−78)Ni+^(58)Ni,and ^(100−139)Sn(every third isotopes)+112 Sn for full reduced impact parameters using the isospin-dependent quantum molecular dynamics(IQMD)model.The neutron and proton density distributions and root-mean-square radii of the reaction systems were obtained using the Skyrme-Hartree-Fock model,which was used for the phase space initialization of the projectile and target in IQMD.We defined the unified neutron skin thickness asΔRnp=<r^(2)>^(1∕2) n−<r^(2)>^(1∕2)p,which was negative for neutron-deficient nuclei.The unifiedΔRnp values for nuclei with the same relative neutron excess from different isotopic chains were nearly equal,except for extreme neutron-rich isotopes,which is a type of scaling behavior.The yield ratios of the three isotopic chain-induced reactions,which depended on the reduced impact parameter and unified neutron skin thickness,were studied.The results showed that both R(n/p)and R(^(3)H∕^(3)He)decreased with a reduced impact parameter for extreme neutron-deficient isotopes;however,they increased with reduced impact parameters for extreme neutron-rich isotopes,and increased with theΔRnp of the projectiles for all reduced impact parameters.In addition,a scaling phenomenon was observed betweenΔR np and the yield ratios in peripheral colli-sions from different isotopic chain projectiles(except for extreme neutron-rich isotopes).Thus,R(n/p)and R(^(3)H∕^(3)He)from peripheral collisions were suggested as experimental probes for extracting the neutron or proton skin thicknesses of non-extreme neutron-rich nuclei from different isotopic chains.
基金supported by the National Natural Science Foundation of China(No.11405025)
文摘The yield ratios of neutron/proton(R(n/p)) and ~3H=~3He(R(t/~3He)) with reduced rapidity from 0 to 0.5 are investigated for 50 MeV/u ^(42;44;46;48;50;52;54;56)Ca+^(40)Ca.This was conducted at whole reduced impact parameters using the isospin-dependent quantum-molecular-dynamics model in which the initial neutron and proton densities are sampled within the Skyrme–Hartree–Fock model, using which the neutron skin thickness(△R_(np)) is determined for different neutron-rich Ca isotopes. The results show that both R(n/p) and R(t/~3He) have strong linear correlations with △R_(np) of different Ca isotopic projectiles from five different centralities. It is suggested that R(n/p) and R(t/~3He), from the same centrality, could be treated as possible experimental observables to extract the neutron skin or halo thickness for neutron-rich isotopic nuclei,including the nuclei near the neutron drip line.
基金supported by the National Natural Science Foundation of China(No.11405025)
文摘The neutron-to-proton and3 H-to-3 He yield ratios, and the directed flows of particles dependent on a reduced rapidity, the transverse momentum per nucleon,and a reduced impact parameter are investigated for ^(28)S+^(28)Si and ^(32)S+^(28)Si systems at 50 and 400 MeV/u using an isospin-dependent quantum molecular dynamics model.The results show that these yield ratios of projectile-like fragments are approximately equal to the constituent neutron-to-proton ratio of the projectile. There are clear differences of the directed flows for isospin-related fragments neutron and proton,~3H and ~3He from ^(28)S+^(28)Si collisions.The differences in directed flows for neutrons and protons and ~3H–~3He from a proton-rich nucleus ^(28)S- induced collisions are noticeably larger than those from a stable nucleus ^(32)S- induced reactions under medium impact parameters. Thus, the yield ratios and differences in directed flows for the neutrons and protons and ~3H–~3He under medium impact parameters are proposed as possible observable items for studying isospin physics.
基金Supported by Program for Science&Technology Innovation Talents in Universities of Henan Province under Grant No.13HASTIT046
文摘A probe to extract the temperature(T_(iyr)) from intermediate-mass fragment has been proposed using the isobaric yield ratio(IYR) difference based on the modified Fisher model.By analyzing the isobaric cross section in the measured 140 A MeV^(40,48)Ca+~9Be reactions,the Tiyr can well fit the IYR difference for the large mass fragments.Because of the fragments are produced in different colliding regions,it is also suggested to select the fragments according to different mechanisms when using TIYR.
基金Supported by the Program for Science&Technology Innovation Talents in Universities of Henan Province(No.13HASTIT046)the Young Teacher Project in Henan Normal University
文摘We report our recent progress on the nuclear symmetry energy probe,which is called the isobaric yield ratio difference(IBD),and its application in neutron density determination in experiments.The results obtained by the IBD,from which the isobaric yields in the measured 140 A MeV ^(40.48)Ca + ~9Be and ^(58.64)Ni + ~9Be reactions,and the calculated 80 A MeV ^(38-52)Ca +^(12)C reactions by using a modified statistical abrasion-ablation model,show the sensitivity of the IBD to the density differences between reactions.
基金Supported in part by the Scientific Research Foundation of Hubei University of Education for Talent Introduction (ESRC20230002, ESRC20230007)Research Project of Hubei Provincial Department of Education (D20233003, B2023191)。
文摘This study uses the AMPT model in Au+Au collisions to study the influence of the three nucleon correlation C_(n^(2)p) on light nuclei yield ratios. Neglecting C_(n^(2)p) results in an overestimated relative neutron density fluctuation extraction. In contrast, including C_(n^(2)p) enhances the agreement with experimental results with higher yield ratios but does not change the energy dependence of the yield ratio. Since the AMPT model does exhibit a first-order phase transition or critical physics, the study fails to reproduce the experimental energy-dependent peak around sNN1/2=20-30 GeV. The study'us findings might offer a baseline for investigating critical physics phenomena using light nuclei production as a probe.
基金Supported by National Natural Science Foundation of China(11405025)
文摘The yield ratios of neutron/proton and ^3H/^3He and the directed flow per nucleon for these projectile-like fragments at large impact parameters are studied for ^50Ca ＋ ^40Ca and ^50Cr ＋ ^40Ca for comparison at 50 MeV/u using the isospin-dependent quantum molecular dynamics（IQMD model.It is found that the yield ratios and the directed flows per nucleon are different for reactions induced by the neutron-rich nucleus ^50Ca and the stable isobaric nucleus ^50Cr,and depend on the hardness of the EOS.The ratios of neutron/proton and ^3H/^3He and the difference of directed flow per nucleon of neutron-proton are suggested to be possible observables to investigate the isospin effects.
文摘The hit ratio of the yield strength of HRB400 D reinforced bar(Tangshan Iron and Steel Co.) is low. In this study, the effects of [C], [Mn], [Si], and [V] on the yield strength and mechanism were investigated. The HRB400 D reinforced bar with a specification of 22 spiral was chosen. A narrow composition control was achieved by reducing the lower limit of the Mn content and the amount of the alloying elements; moreover, the hit ratio of the reinforced bar yield strength increased from 65.54% to 96.27%, enhancing product stability. The cost of the steel alloy reduced by 8.86 RMB/ton, improving the market competitiveness of the product.
基金Supported by the Project of "Demonstration and Integration of Agricultural Non-point Source Pollution Prevention and Control Technology in Rice Production Areas of Southern Plain of China"Belonging to National Science and Technology Program for"Twelfth Five-Year"Plan(2012BAD15B03)Youth Innovation Funds of Jiangxi Academy of Agricultural Sciences "Effects of Row-Spacing on Yield of Different Double Cropping Rice Varieties and Its Mechanism"(2010-CQN004)
文摘[Objective]The aim was to provide a theoretical basis for the rational configuration of ratio of row spacing to intrarow spacing(RS/IS)of double-cropping rice.[Methods]With early rice‘Ganxin 203’and‘Zhongjiazao 17’and late rice‘Ganxin 688’and‘Wufengyou T025’as materials,the effects of RS/IS on yield,nitrogen accumulation and utilization were studied in the same planting density of31.20×104hills/hm2.[Results]The results showed that yield of early rice was higher in RS/IS2.8(30.0 cm×10.7 cm)and RS/IS2.0(25.0 cm×12.8 cm)treatment,and lower in RS/IS5.0(40.0 cm×8.0 cm)and RS/IS1.3(20.0 cm×16.0 cm)treatment,while late rice were higher in RS/IS5.0and RS/IS2.0treatment,and lower in RS/IS2.8and RS/IS1.3treatment.Total nitrogen accumulation and apparent utilization ratio of nitrogen of early rice were higher in RS/IS2.0treatment and lower in RS/IS5.0treatment,while,for late rice were higher in RS/IS2.8treatment and lower in RS/IS5.0treatment.Nitrogen requirement for 100 kg grain production of early rice was higher in RS/IS1.3treatment and lower in RS/IS2.0treatment,while,for late rice were higher in RS/IS2.8treatment,lower in RS/IS5.0treatment.[Conclusion]In sum,4 varieties of early and late rice obtained higher yield in 25.0 cm×12.8 cm and lower yield in 20.0 cm×16.0 cm,and total nitrogen accumulation,nitrogen requirement for 100 kg grain production and apparent utilization ratio of nitrogen were all lower in 40.0 cm×8.0 cm.
基金Supported by Special Fund for Agro-scientific Research in the Public Interest(20120304201)
文摘[ Objectives ] The aim was to optimize the configuration of seedling density and line spacing of forage sweet sorghum （ Sorghum blcolor （ L. ） Moench） and explore its high-yield cultivation techniques. [ Methods] Effects of such two influencing factors as line spacing and seedling density on the leaf-stem ratio, DW/FW ratio and grass yield of forage sweet sorghum were analyzed by using split-plot experiment design experiment method and LSD method of IBM. SPSS. Statis- tics. v22 stati, stics software. [ Results ~ Seedling density and line spacing had no obvious effect on the leaf-stem ratio and DW/FW ratio of forage sweet sorghum but had obvious influences on the grass yield. Moreover, the optimal combination of seedling density and line spacing for high yield of forage sweet sorghum was A2 B4, that is, seedling density was 225 000 plants/hm2, and line spacing was 40 cm. [ Conclusions] The results provided a theoretical basis and technical support for high-yield cultivation techniques of forage sweet sorghum.
基金supported by the National Basic Research Program of China(973 Program,2010CB951502)the Special Fund for Agro-Scientific Research in the Public Interest in China(201103001)
文摘Excessive use of N fertilizer in intensive agriculture can increase crop yield and at the same time cause high carbon（C） emissions.This study was conducted to determine optimized N fertilizer application for high grain yield and lower C emissions in summer corn（Zea mays L.）.A field experiment, including 0（N0）, 75（N75）, 150（N150）, 225（N225）, and 300（N300） kg N ha–1 treatments, was carried out during 2010–2012 in the North China Plain（NCP）.The results showed that grain yield, input energy, greenhouse gas（GHG） emissions, and carbon footprint（CF） were all increased with the increase of N rate, except net energy yield（NEY）.The treatment of N225 had the highest grain yield（10 364.7 kg ha–1） and NEY（6.8%）, but the CF（0.25） was lower than that of N300, which indicates that a rate of 225 kg N ha–1 can be optimal for summer corn in NCP.Comparing GHG emision compontents, N fertilizer（0–51.1%） was the highest and followed by electricity for irrigation（19.73–49.35%）.We conclude that optimazing N fertilizer application rate and reducing electricity for irrigation are the two key measures to increase crop yield, improve energy efficiency and decrease GHG emissions in corn production.
