Target-based and phenotype-based methods are the two main approaches for drug screening.Target-based drug screening focuses on specific targets CPA highly correlated with disease mechanisms,by detecting protein-ligand...Target-based and phenotype-based methods are the two main approaches for drug screening.Target-based drug screening focuses on specific targets CPA highly correlated with disease mechanisms,by detecting protein-ligand binding structure,dynamics and affinity.Currently,the four mainstream drug targets are G protein-coupled receptors(GPCRs),kinases,ion channels,and nuclear receptors,accounting for over 70%of effective drug targets,most of which are membrane proteins and enzymes.In recent years,various new drug targets have been continuously discovered,and the research focus has shifted from simple affinity analysis to high-throughput and high-content screening,as well as exploring drug-target interaction modes.These deepen reliance on the analytical techniques to have higher sensitivity,recognition specificity,and applicability to diversified target structures,which promoting the rapid development of novel screening methods.展开更多
An inverse analysis is presented to estimate line heat source in two-dimensional steady-state and transient heat transfer problems.A constant heat source is considered in the steady-state heat transfer problem(a param...An inverse analysis is presented to estimate line heat source in two-dimensional steady-state and transient heat transfer problems.A constant heat source is considered in the steady-state heat transfer problem(a parameter estimation problem)and a time-varying heat source is considered in the transient heat transfer problem(a function estimation problem).Since a general irregular 2D heat conducting body is considered,a body-fitted grid generation is used to mesh the domain.Then governing equations and associated boundary and initial conditions are transformed from the physical domain to the computational domain and finite difference method is used to solve the governing equations to obtain the temperature distribution in the body.Using an efficient,accurate,and very easy to implement sensitivity analysis incorporated in a gradient based minimization method(here,steepest descentmethod),the unknown heat source is estimated accurately.In the function estimation part,it is assumed that there is no prior information on the functional form of the heat source and the estimation process can be performed with a reasonable initial guess for the heat source.The main advantage of the proposed inverse analysis is that the sensitivity matrix(and hence,the objective function gradient with respect to the unknown variables)can be computed during the direct heat transfer solution through newyet simple explicit expressions with no need to solve extra equations such as the sensitivity and adjoint problems and impose additional computational costs comparable to the direct problem solution ones.Some test cases are presented to investigate the accuracy,efficiency,and effect of measurement error on the estimated parameter and function for the line heat source.展开更多
In high-altitude nuclear detonations,the proportion of pulsed X-ray energy can exceed 70%,making it a specific monitoring signal for such events.These pulsed X-rays can be captured using a satellite-borne X-ray detect...In high-altitude nuclear detonations,the proportion of pulsed X-ray energy can exceed 70%,making it a specific monitoring signal for such events.These pulsed X-rays can be captured using a satellite-borne X-ray detector following atmospheric transmission.To quantitatively analyze the effects of different satellite detection altitudes,burst heights,and transmission angles on the physical processes of X-ray transport and energy fluence,we developed an atmospheric transmission algorithm for pulsed X-rays from high-altitude nuclear detonations based on scattering correction.The proposed method is an improvement over the traditional analytical method that only computes direct-transmission X-rays.The traditional analytical method exhibits a maximum relative error of 67.79% compared with the Monte Carlo method.Our improved method reduces this error to within 10% under the same conditions,even reaching 1% in certain scenarios.Moreover,its computation time is 48,000 times faster than that of the Monte Carlo method.These results have important theoretical significance and engineering application value for designing satellite-borne nuclear detonation pulsed X-ray detectors,inverting nuclear detonation source terms,and assessing ionospheric effects.展开更多
Government credibility is an important asset of contemporary national governance, an important criterion for evaluating government legitimacy, and a key factor in measuring the effectiveness of government governance. ...Government credibility is an important asset of contemporary national governance, an important criterion for evaluating government legitimacy, and a key factor in measuring the effectiveness of government governance. In recent years, researchers’ research on government credibility has mostly focused on exploring theories and mechanisms, with little empirical research on this topic. This article intends to apply variable selection models in the field of social statistics to the issue of government credibility, in order to achieve empirical research on government credibility and explore its core influencing factors from a statistical perspective. Specifically, this article intends to use four regression-analysis-based methods and three random-forest-based methods to study the influencing factors of government credibility in various provinces in China, and compare the performance of these seven variable selection methods in different dimensions. The research results show that there are certain differences in simplicity, accuracy, and variable importance ranking among different variable selection methods, which present different importance in the study of government credibility issues. This study provides a methodological reference for variable selection models in the field of social science research, and also offers a multidimensional comparative perspective for analyzing the influencing factors of government credibility.展开更多
A series of SnO2‐based catalysts modified by Mn, Zr, Ti and Pb oxides with a Sn/M （M=Mn, Zr, Ti and Pb） molar ratio of 9/1 were prepared by a co‐precipitation method and used for CH4 and CO oxidation. The Mn3＋, ...A series of SnO2‐based catalysts modified by Mn, Zr, Ti and Pb oxides with a Sn/M （M=Mn, Zr, Ti and Pb） molar ratio of 9/1 were prepared by a co‐precipitation method and used for CH4 and CO oxidation. The Mn3＋, Zr4＋, Ti4＋and Pb4＋cations are incorporated into the lattice of tetragonal rutile SnO2 to form a solid solution structure. As a consequence, the surface area and thermal stability of the catalysts are improved. Moreover, the oxygen species of the modified catalysts become easier to be reduced. Therefore, the oxidation activity over the catalysts was improved, except for the one modified by Pb oxide. Manganese oxide demonstrates the best promotional effects for SnO2. Using an X‐ray diffraction extrapolation method, the lattice capacity of SnO2 for Mn2O3 was 0.135 g Mn2O3/g SnO2, which indicates that to form stable solid solution, only 21%Sn4＋cations in the lattice can be maximally replaced by Mn3＋. If the amount of Mn3＋cations is over the capacity, Mn2O3 will be formed, which is not favorable for the activity of the catalysts. The Sn rich samples with only Sn‐Mn solid solution phase show higher activity than the ones with excess Mn2O3 species.展开更多
The dispersed phase in multiphase flows can be modeled by the population balance model(PBM). A typical population balance equation(PBE) contains terms for spatial transport, loss/growth and breakage/coalescence source...The dispersed phase in multiphase flows can be modeled by the population balance model(PBM). A typical population balance equation(PBE) contains terms for spatial transport, loss/growth and breakage/coalescence source terms. The equation is therefore quite complex and difficult to solve analytically or numerically. The quadrature-based moment methods(QBMMs) are a class of methods that solve the PBE by converting the transport equation of the number density function(NDF) into moment transport equations. The unknown source terms are closed by numerical quadrature. Over the years, many QBMMs have been developed for different problems, such as the quadrature method of moments(QMOM), direct quadrature method of moments(DQMOM),extended quadrature method of moments(EQMOM), conditional quadrature method of moments(CQMOM),extended conditional quadrature method of moments(ECQMOM) and hyperbolic quadrature method of moments(Hy QMOM). In this paper, we present a comprehensive algorithm review of these QBMMs. The mathematical equations for spatially homogeneous systems with first-order point processes and second-order point processes are derived in detail. The algorithms are further extended to the inhomogeneous system for multiphase flows, in which the computational fluid dynamics(CFD) can be coupled with the PBE. The physical limitations and the challenging numerical problems of these QBMMs are discussed. Possible solutions are also summarized.展开更多
On the basis of the concept of finite element methods, the rigorous analytical solutions of structural response in terms of the design variables are researched in this paper. The spatial trusses are taken as an exampl...On the basis of the concept of finite element methods, the rigorous analytical solutions of structural response in terms of the design variables are researched in this paper. The spatial trusses are taken as an example for the solution of the analytical expressions of the explicit displacements which are proved mathematically; then some conclusions are reached that are useful to structural sensitivity analysis and optimization. In the third part of the paper, a generalized geometric programming method is sugviped for the optimal model with the explicit displacement. Finally, the analytical solutions of the displacements of three trusses are given as examples.展开更多
The Nei's improved genetic distance(DA)and gene flow(Nm)were measured using sixteen microsatellite markers.Dendograms based on DA genetic distance using the neighbor-joining(NJ)method and STRUCTURE program were co...The Nei's improved genetic distance(DA)and gene flow(Nm)were measured using sixteen microsatellite markers.Dendograms based on DA genetic distance using the neighbor-joining(NJ)method and STRUCTURE program were constructed to analyze the genetic structure and relationship among 10 Chinese indigenous chicken breeds.The results showed that dendograms of DA genetic distance using the NJ method divided the 10 chicken breeds into two main clusters;one consisted of breeds of low weight body(CHA,TTB,XIA,GUS and BAI),the other contained heavier breeds(LAN,DAG,YOU,XIS and LUY).In the lighter breeds,TIB and CHA clustered together,as did XIA and GUS.In the heavier breeds,XIS and LUY was clustered together in one branch,but LAN,DAG and YOU clustered in independent branches.The results were consistent with Nm estimates among the 10 indigenous chicken breeds.The STRUCTURE program properly inferred the presence of genetic structure despite not pre-defining the origin of individuals.The genetic cluster inferred by STRUCTURE was basically the same as that from the DA distance clustering method.An advantage of the STRUCTURE program was its ability to identify the migrants and admixed individuals in the 10 chicken populations;this could not be achieved by use of the DA distance clustering method.展开更多
With the increasing interest in e-commerce shopping, customer reviews have become one of the most important elements that determine customer satisfaction regarding products. This demonstrates the importance of working...With the increasing interest in e-commerce shopping, customer reviews have become one of the most important elements that determine customer satisfaction regarding products. This demonstrates the importance of working with Text Mining. This study is based on The Women’s Clothing E-Commerce Reviews database, which consists of reviews written by real customers. The aim of this paper is to conduct a Text Mining approach on a set of customer reviews. Each review was classified as either a positive or negative review by employing a classification method. Four tree-based methods were applied to solve the classification problem, namely Classification Tree, Random Forest, Gradient Boosting and XGBoost. The dataset was categorized into training and test sets. The results indicate that the Random Forest method displays an overfitting, XGBoost displays an overfitting if the number of trees is too high, Classification Tree is good at detecting negative reviews and bad at detecting positive reviews and the Gradient Boosting shows stable values and quality measures above 77% for the test dataset. A consensus between the applied methods is noted for important classification terms.展开更多
This essay focused on comparing and contrasts audio lingual method and Task-based language teaching method,demonstrating the strengths and weaknesses of the two methods and discusses how they impact upon both the teac...This essay focused on comparing and contrasts audio lingual method and Task-based language teaching method,demonstrating the strengths and weaknesses of the two methods and discusses how they impact upon both the teachers and the learners.TBLT is the contemporary teaching method with a great number of strong points.It seems that if there is more relatively scientific and effective method,TBLT should give way to it.The ultimate goal is to advocate the comparatively successful teaching method in the field of foreign language education.展开更多
Effective prevention and management of osteoporosis would require suitable methods for population screenings and early diagnosis. Current clinicallyavailable diagnostic methods are mainly based on the use of either X-...Effective prevention and management of osteoporosis would require suitable methods for population screenings and early diagnosis. Current clinicallyavailable diagnostic methods are mainly based on the use of either X-rays or ultrasound(US). All X-ray based methods provide a measure of bone mineral density(BMD), but it has been demonstrated that other structural aspects of the bone are important in determining fracture risk, such as mechanical features and elastic properties, which cannot be assessed using densitometric techniques. Among the most commonly used techniques, dual X-ray absorptiometry(DXA) is considered the current 'gold standard' for osteoporosis diagnosis and fracture risk prediction. Unfortunately, as other X-ray based techniques, DXA has specific limitations(e.g., use of ionizing radiation, large size of the equipment, high costs, limited availability) that hinder its application for population screenings and primary care diagnosis. This has resulted in an increasing interest in developing reliable pre-screening tools for osteoporosis such as quantitative ultrasound(QUS) scanners, which do not involve ionizing radiation exposure and represent a cheaper solution exploiting portable and widely available devices. Furthermore, the usefulness of QUS techniques in fracture risk prediction has been proven and, with the last developments, they are also becoming a more and more reliable approach for assessing bone quality. However, the US assessment of osteoporosis is currently used only as a pre-screening tool, requiring a subsequent diagnosis confirmation by means of a DXA evaluation. Here we illustrate the state of art in the early diagnosis of this 'silent disease' and show up recent advances for its prevention and improved management through early diagnosis.展开更多
This paper covers an experimental study on vocational students' participation in the class under task-based approach and traditional grammar-translation teaching method.As vocational colleges in China have develop...This paper covers an experimental study on vocational students' participation in the class under task-based approach and traditional grammar-translation teaching method.As vocational colleges in China have developed rapidly,teachers are still exploring and experimenting with different teaching approaches in order to find the suitable one(s).Using the theory of task-based approach,the grammartranslation method,the author conducts an experiment by recording.The following key issue has been addressed and some conclusive results have been made.The paper intends to find an answer to the following question:Under which teaching approach can students participate in the class more actively? Based on the above research work,the following result has been reached:Task-based approach can promote students' mastering of vocabulary and grammar,and students participate in the class more actively.The author would like to share her experiences with others in pedagogical studies of teaching vocational college students English.展开更多
Based on the high flux synchrotron X-ray of the Shanghai Synchrotron Radiation Facility (SSRF), high precision 3D digital models of diesel nozzle tips have been established by X-ray micro-tomography technology, which ...Based on the high flux synchrotron X-ray of the Shanghai Synchrotron Radiation Facility (SSRF), high precision 3D digital models of diesel nozzle tips have been established by X-ray micro-tomography technology, which reveal the internal surfaces and structures of orifices. To analyze the machining precision and characteristics of orifice processing methods, an ap- proach is presented based on the parameters of the internal structures of nozzle orifices, including the nozzle diameter, the orifice inner surface waviness, the eccentricity distance and the angle between orifices. Using this approach, two kinds of nozzle orifice processing methods, computerized numerical control drilling and electric discharge machining, have been studied and compared. The results show that this approach enables a simple, direct, and comprehensive contrastive analysis of nozzle orifice processing methods. When processing a single orifice, the electric discharge machining method has obvious advantages. However, when there are multiple orifices, the error levels of the two methods are similar in relation to the symmetry of distribution of the orifices.展开更多
The nucleotide (base) sequence of the genome might reflect biological information beyond the coding sequences. The appearance frequencies of successive base sequences (key sequences) were calculated for entire genomes...The nucleotide (base) sequence of the genome might reflect biological information beyond the coding sequences. The appearance frequencies of successive base sequences (key sequences) were calculated for entire genomes. Based on the appearance frequency of the key sequences of the genome, any DNA sequences on the genome could be expressed as a sequence spectrum with the adjoining base sequences, which could be used to study the corresponding biological phenomena. In this paper, we used 64 successive three- base sequences (triplets) as the key sequences, and determined and compared the spectra of specific genes to the chromosome, or specific genes to tRNA genes in Saccharomyces cerevisiae, Schizosaccharomyces pombe and Escherichia coli. Based on these analyses, a gene and its corresponding position on the chromosome showed highly similar spectra with the same fold enlargement (approximately 400-fold) in the S. cerevisiae, S. pombe and E. coli genomes. In addition, the homologous structure of genes that encode proteins was also observed with appropriate tRNA gene(s) in the genome. This analytical method might faithfully reflect the encoded biological information, that is, the conservation of the base sequences was to make sense the conservation of the translated amino acids sequence in the coding region, and might be universally applicable to other genomes, even those that consisted of multiple chromosomes.展开更多
Very low frequency(VLF)signals are propagated between the ground-ionosphere.Multimode interference will cause the phase to show oscillatory changes with distance while propagating at night,leading to abnormalities in ...Very low frequency(VLF)signals are propagated between the ground-ionosphere.Multimode interference will cause the phase to show oscillatory changes with distance while propagating at night,leading to abnormalities in the received VLF signal.This study uses the VLF signal received in Qingdao City,Shandong Province,from the Russian Alpha navigation system to explore the multimode interference problem of VLF signal propagation.The characteristics of the effect of multimode interference phenomena on the phase are analyzed according to the variation of the phase of the VLF signal.However,the phase of VLF signals will also be affected by the X-ray and energetic particles that are released during the eruption of solar flares,therefore the two phenomena are studied in this work.It is concluded that the X-ray will not affect the phase of VLF signals at night,but the energetic particles will affect the phase change,and the influence of energetic particles should be excluded in the study of multimode interference phenomena.Using VLF signals for navigation positioning in degraded or unavailable GPS conditions is of great practical significance for VLF navigation systems as it can avoid the influence of multimode interference and improve positioning accuracy.展开更多
In this paper a new .mnultidimensional time series forecasting scheme based on the empirical orthogonal function (EOF) stepwise iteration process is introduced. The scheme is tested in a series of forecast experiments...In this paper a new .mnultidimensional time series forecasting scheme based on the empirical orthogonal function (EOF) stepwise iteration process is introduced. The scheme is tested in a series of forecast experiments of Nino3 SST anomalies and Tahiti-Darwin SO index. The results show that the scheme is feasible and ENSO predictable.展开更多
Effective extraction of data association rules can provide a reliable basis for classification of stellar spectra. The concept of stellar spectrum weighted itemsets and stellar spectrum weighted association rules are ...Effective extraction of data association rules can provide a reliable basis for classification of stellar spectra. The concept of stellar spectrum weighted itemsets and stellar spectrum weighted association rules are introduced, and the weight of a single property in the stellar spectrum is determined by information entropy. On that basis, a method is presented to mine the association rules of a stellar spectrum based on the weighted frequent pattern tree. Important properties of the spectral line are highlighted using this method. At the same time, the waveform of the whole spectrum is taken into account. The experimental results show that the data association rules of a stellar spectrum mined with this method are consistent with the main features of stellar spectral types.展开更多
This paper presents some methods that the standard acceleration design response spectra derived from the present China code for seismic design of buildings are transformed into the seismic demand spectra, and that the...This paper presents some methods that the standard acceleration design response spectra derived from the present China code for seismic design of buildings are transformed into the seismic demand spectra, and that the base shear force-roof displacement curve of structure is converted to the capacity spectrum of an equivalent single-degree-of-freedom （SDOF） system. The capacity spectrum method （CSM） is programmed by means of MATLABT.0 computer language. A dual lateral force resisting system of 10-story steel frame-steel plate shear walls （SPSW） is designed according to the corresponding China design codes. The base shear force-roof displacement curve of structure subjected to the monotonic increasing lateral inverse triangular load is obtained by applying the equivalent strip model to stimulate SPSW and by using the finite element analysis software SAP2000 to make Pushover analysis. The seismic performance of this dual system subjected to three different conditions, i.e. the 8-intensity frequently occurred earthquake, fortification earthquake and seldom occurred earthquake, is evaluated by CSM program. The excessive safety of steel frame-SPSW system designed according to the present China design codes is pointed out and a new design method is suggested.展开更多
文摘Target-based and phenotype-based methods are the two main approaches for drug screening.Target-based drug screening focuses on specific targets CPA highly correlated with disease mechanisms,by detecting protein-ligand binding structure,dynamics and affinity.Currently,the four mainstream drug targets are G protein-coupled receptors(GPCRs),kinases,ion channels,and nuclear receptors,accounting for over 70%of effective drug targets,most of which are membrane proteins and enzymes.In recent years,various new drug targets have been continuously discovered,and the research focus has shifted from simple affinity analysis to high-throughput and high-content screening,as well as exploring drug-target interaction modes.These deepen reliance on the analytical techniques to have higher sensitivity,recognition specificity,and applicability to diversified target structures,which promoting the rapid development of novel screening methods.
文摘An inverse analysis is presented to estimate line heat source in two-dimensional steady-state and transient heat transfer problems.A constant heat source is considered in the steady-state heat transfer problem(a parameter estimation problem)and a time-varying heat source is considered in the transient heat transfer problem(a function estimation problem).Since a general irregular 2D heat conducting body is considered,a body-fitted grid generation is used to mesh the domain.Then governing equations and associated boundary and initial conditions are transformed from the physical domain to the computational domain and finite difference method is used to solve the governing equations to obtain the temperature distribution in the body.Using an efficient,accurate,and very easy to implement sensitivity analysis incorporated in a gradient based minimization method(here,steepest descentmethod),the unknown heat source is estimated accurately.In the function estimation part,it is assumed that there is no prior information on the functional form of the heat source and the estimation process can be performed with a reasonable initial guess for the heat source.The main advantage of the proposed inverse analysis is that the sensitivity matrix(and hence,the objective function gradient with respect to the unknown variables)can be computed during the direct heat transfer solution through newyet simple explicit expressions with no need to solve extra equations such as the sensitivity and adjoint problems and impose additional computational costs comparable to the direct problem solution ones.Some test cases are presented to investigate the accuracy,efficiency,and effect of measurement error on the estimated parameter and function for the line heat source.
文摘In high-altitude nuclear detonations,the proportion of pulsed X-ray energy can exceed 70%,making it a specific monitoring signal for such events.These pulsed X-rays can be captured using a satellite-borne X-ray detector following atmospheric transmission.To quantitatively analyze the effects of different satellite detection altitudes,burst heights,and transmission angles on the physical processes of X-ray transport and energy fluence,we developed an atmospheric transmission algorithm for pulsed X-rays from high-altitude nuclear detonations based on scattering correction.The proposed method is an improvement over the traditional analytical method that only computes direct-transmission X-rays.The traditional analytical method exhibits a maximum relative error of 67.79% compared with the Monte Carlo method.Our improved method reduces this error to within 10% under the same conditions,even reaching 1% in certain scenarios.Moreover,its computation time is 48,000 times faster than that of the Monte Carlo method.These results have important theoretical significance and engineering application value for designing satellite-borne nuclear detonation pulsed X-ray detectors,inverting nuclear detonation source terms,and assessing ionospheric effects.
文摘Government credibility is an important asset of contemporary national governance, an important criterion for evaluating government legitimacy, and a key factor in measuring the effectiveness of government governance. In recent years, researchers’ research on government credibility has mostly focused on exploring theories and mechanisms, with little empirical research on this topic. This article intends to apply variable selection models in the field of social statistics to the issue of government credibility, in order to achieve empirical research on government credibility and explore its core influencing factors from a statistical perspective. Specifically, this article intends to use four regression-analysis-based methods and three random-forest-based methods to study the influencing factors of government credibility in various provinces in China, and compare the performance of these seven variable selection methods in different dimensions. The research results show that there are certain differences in simplicity, accuracy, and variable importance ranking among different variable selection methods, which present different importance in the study of government credibility issues. This study provides a methodological reference for variable selection models in the field of social science research, and also offers a multidimensional comparative perspective for analyzing the influencing factors of government credibility.
基金supported by the National Natural Science Foundation of China (21263015,21567016 and 21503106)the Education Department Foundation of Jiangxi Province (KJLD14005 and GJJ150016)the Natural Science Foundation of Jiangxi Province (20142BAB213013 and 20151BBE50006),which are greatly acknowledged by the authors~~
文摘A series of SnO2‐based catalysts modified by Mn, Zr, Ti and Pb oxides with a Sn/M （M=Mn, Zr, Ti and Pb） molar ratio of 9/1 were prepared by a co‐precipitation method and used for CH4 and CO oxidation. The Mn3＋, Zr4＋, Ti4＋and Pb4＋cations are incorporated into the lattice of tetragonal rutile SnO2 to form a solid solution structure. As a consequence, the surface area and thermal stability of the catalysts are improved. Moreover, the oxygen species of the modified catalysts become easier to be reduced. Therefore, the oxidation activity over the catalysts was improved, except for the one modified by Pb oxide. Manganese oxide demonstrates the best promotional effects for SnO2. Using an X‐ray diffraction extrapolation method, the lattice capacity of SnO2 for Mn2O3 was 0.135 g Mn2O3/g SnO2, which indicates that to form stable solid solution, only 21%Sn4＋cations in the lattice can be maximally replaced by Mn3＋. If the amount of Mn3＋cations is over the capacity, Mn2O3 will be formed, which is not favorable for the activity of the catalysts. The Sn rich samples with only Sn‐Mn solid solution phase show higher activity than the ones with excess Mn2O3 species.
文摘The dispersed phase in multiphase flows can be modeled by the population balance model(PBM). A typical population balance equation(PBE) contains terms for spatial transport, loss/growth and breakage/coalescence source terms. The equation is therefore quite complex and difficult to solve analytically or numerically. The quadrature-based moment methods(QBMMs) are a class of methods that solve the PBE by converting the transport equation of the number density function(NDF) into moment transport equations. The unknown source terms are closed by numerical quadrature. Over the years, many QBMMs have been developed for different problems, such as the quadrature method of moments(QMOM), direct quadrature method of moments(DQMOM),extended quadrature method of moments(EQMOM), conditional quadrature method of moments(CQMOM),extended conditional quadrature method of moments(ECQMOM) and hyperbolic quadrature method of moments(Hy QMOM). In this paper, we present a comprehensive algorithm review of these QBMMs. The mathematical equations for spatially homogeneous systems with first-order point processes and second-order point processes are derived in detail. The algorithms are further extended to the inhomogeneous system for multiphase flows, in which the computational fluid dynamics(CFD) can be coupled with the PBE. The physical limitations and the challenging numerical problems of these QBMMs are discussed. Possible solutions are also summarized.
文摘On the basis of the concept of finite element methods, the rigorous analytical solutions of structural response in terms of the design variables are researched in this paper. The spatial trusses are taken as an example for the solution of the analytical expressions of the explicit displacements which are proved mathematically; then some conclusions are reached that are useful to structural sensitivity analysis and optimization. In the third part of the paper, a generalized geometric programming method is sugviped for the optimal model with the explicit displacement. Finally, the analytical solutions of the displacements of three trusses are given as examples.
基金supported by the Program of National Technological Basis from Ministry of Science and Technology of China(No.2005DKA21101)the National Natural Science Foundation of China(No.30700572)
文摘The Nei's improved genetic distance(DA)and gene flow(Nm)were measured using sixteen microsatellite markers.Dendograms based on DA genetic distance using the neighbor-joining(NJ)method and STRUCTURE program were constructed to analyze the genetic structure and relationship among 10 Chinese indigenous chicken breeds.The results showed that dendograms of DA genetic distance using the NJ method divided the 10 chicken breeds into two main clusters;one consisted of breeds of low weight body(CHA,TTB,XIA,GUS and BAI),the other contained heavier breeds(LAN,DAG,YOU,XIS and LUY).In the lighter breeds,TIB and CHA clustered together,as did XIA and GUS.In the heavier breeds,XIS and LUY was clustered together in one branch,but LAN,DAG and YOU clustered in independent branches.The results were consistent with Nm estimates among the 10 indigenous chicken breeds.The STRUCTURE program properly inferred the presence of genetic structure despite not pre-defining the origin of individuals.The genetic cluster inferred by STRUCTURE was basically the same as that from the DA distance clustering method.An advantage of the STRUCTURE program was its ability to identify the migrants and admixed individuals in the 10 chicken populations;this could not be achieved by use of the DA distance clustering method.
文摘With the increasing interest in e-commerce shopping, customer reviews have become one of the most important elements that determine customer satisfaction regarding products. This demonstrates the importance of working with Text Mining. This study is based on The Women’s Clothing E-Commerce Reviews database, which consists of reviews written by real customers. The aim of this paper is to conduct a Text Mining approach on a set of customer reviews. Each review was classified as either a positive or negative review by employing a classification method. Four tree-based methods were applied to solve the classification problem, namely Classification Tree, Random Forest, Gradient Boosting and XGBoost. The dataset was categorized into training and test sets. The results indicate that the Random Forest method displays an overfitting, XGBoost displays an overfitting if the number of trees is too high, Classification Tree is good at detecting negative reviews and bad at detecting positive reviews and the Gradient Boosting shows stable values and quality measures above 77% for the test dataset. A consensus between the applied methods is noted for important classification terms.
文摘This essay focused on comparing and contrasts audio lingual method and Task-based language teaching method,demonstrating the strengths and weaknesses of the two methods and discusses how they impact upon both the teachers and the learners.TBLT is the contemporary teaching method with a great number of strong points.It seems that if there is more relatively scientific and effective method,TBLT should give way to it.The ultimate goal is to advocate the comparatively successful teaching method in the field of foreign language education.
基金Supported by Partially funded by FESR P.O.Apulia Region 2007-2013-Action 1.2.4,No.3Q5AX31
文摘Effective prevention and management of osteoporosis would require suitable methods for population screenings and early diagnosis. Current clinicallyavailable diagnostic methods are mainly based on the use of either X-rays or ultrasound(US). All X-ray based methods provide a measure of bone mineral density(BMD), but it has been demonstrated that other structural aspects of the bone are important in determining fracture risk, such as mechanical features and elastic properties, which cannot be assessed using densitometric techniques. Among the most commonly used techniques, dual X-ray absorptiometry(DXA) is considered the current 'gold standard' for osteoporosis diagnosis and fracture risk prediction. Unfortunately, as other X-ray based techniques, DXA has specific limitations(e.g., use of ionizing radiation, large size of the equipment, high costs, limited availability) that hinder its application for population screenings and primary care diagnosis. This has resulted in an increasing interest in developing reliable pre-screening tools for osteoporosis such as quantitative ultrasound(QUS) scanners, which do not involve ionizing radiation exposure and represent a cheaper solution exploiting portable and widely available devices. Furthermore, the usefulness of QUS techniques in fracture risk prediction has been proven and, with the last developments, they are also becoming a more and more reliable approach for assessing bone quality. However, the US assessment of osteoporosis is currently used only as a pre-screening tool, requiring a subsequent diagnosis confirmation by means of a DXA evaluation. Here we illustrate the state of art in the early diagnosis of this 'silent disease' and show up recent advances for its prevention and improved management through early diagnosis.
文摘This paper covers an experimental study on vocational students' participation in the class under task-based approach and traditional grammar-translation teaching method.As vocational colleges in China have developed rapidly,teachers are still exploring and experimenting with different teaching approaches in order to find the suitable one(s).Using the theory of task-based approach,the grammartranslation method,the author conducts an experiment by recording.The following key issue has been addressed and some conclusive results have been made.The paper intends to find an answer to the following question:Under which teaching approach can students participate in the class more actively? Based on the above research work,the following result has been reached:Task-based approach can promote students' mastering of vocabulary and grammar,and students participate in the class more actively.The author would like to share her experiences with others in pedagogical studies of teaching vocational college students English.
基金Project supported by the National Natural Science Foundation of China (Nos. 50946052, 51076118 and 51006075)the New Century Excellent Talents (No. NCET-10-0605)+2 种基金the Shanghai Rising-Star Program (No. 11QH1402500)the Fundamental Research Funds for the Central Universitiesthe Specialized Research Fund for the Doctoral Program of Higher Education of China (No. 200802471052)
文摘Based on the high flux synchrotron X-ray of the Shanghai Synchrotron Radiation Facility (SSRF), high precision 3D digital models of diesel nozzle tips have been established by X-ray micro-tomography technology, which reveal the internal surfaces and structures of orifices. To analyze the machining precision and characteristics of orifice processing methods, an ap- proach is presented based on the parameters of the internal structures of nozzle orifices, including the nozzle diameter, the orifice inner surface waviness, the eccentricity distance and the angle between orifices. Using this approach, two kinds of nozzle orifice processing methods, computerized numerical control drilling and electric discharge machining, have been studied and compared. The results show that this approach enables a simple, direct, and comprehensive contrastive analysis of nozzle orifice processing methods. When processing a single orifice, the electric discharge machining method has obvious advantages. However, when there are multiple orifices, the error levels of the two methods are similar in relation to the symmetry of distribution of the orifices.
文摘The nucleotide (base) sequence of the genome might reflect biological information beyond the coding sequences. The appearance frequencies of successive base sequences (key sequences) were calculated for entire genomes. Based on the appearance frequency of the key sequences of the genome, any DNA sequences on the genome could be expressed as a sequence spectrum with the adjoining base sequences, which could be used to study the corresponding biological phenomena. In this paper, we used 64 successive three- base sequences (triplets) as the key sequences, and determined and compared the spectra of specific genes to the chromosome, or specific genes to tRNA genes in Saccharomyces cerevisiae, Schizosaccharomyces pombe and Escherichia coli. Based on these analyses, a gene and its corresponding position on the chromosome showed highly similar spectra with the same fold enlargement (approximately 400-fold) in the S. cerevisiae, S. pombe and E. coli genomes. In addition, the homologous structure of genes that encode proteins was also observed with appropriate tRNA gene(s) in the genome. This analytical method might faithfully reflect the encoded biological information, that is, the conservation of the base sequences was to make sense the conservation of the translated amino acids sequence in the coding region, and might be universally applicable to other genomes, even those that consisted of multiple chromosomes.
基金supported by the National Natural Science Foundation of China(U1704134)。
文摘Very low frequency(VLF)signals are propagated between the ground-ionosphere.Multimode interference will cause the phase to show oscillatory changes with distance while propagating at night,leading to abnormalities in the received VLF signal.This study uses the VLF signal received in Qingdao City,Shandong Province,from the Russian Alpha navigation system to explore the multimode interference problem of VLF signal propagation.The characteristics of the effect of multimode interference phenomena on the phase are analyzed according to the variation of the phase of the VLF signal.However,the phase of VLF signals will also be affected by the X-ray and energetic particles that are released during the eruption of solar flares,therefore the two phenomena are studied in this work.It is concluded that the X-ray will not affect the phase of VLF signals at night,but the energetic particles will affect the phase change,and the influence of energetic particles should be excluded in the study of multimode interference phenomena.Using VLF signals for navigation positioning in degraded or unavailable GPS conditions is of great practical significance for VLF navigation systems as it can avoid the influence of multimode interference and improve positioning accuracy.
文摘In this paper a new .mnultidimensional time series forecasting scheme based on the empirical orthogonal function (EOF) stepwise iteration process is introduced. The scheme is tested in a series of forecast experiments of Nino3 SST anomalies and Tahiti-Darwin SO index. The results show that the scheme is feasible and ENSO predictable.
基金supported by the National Natural Science Foundation of China (Grant Nos. 61073145, 41140027 and 41210104028)the Shanxi Province Natural Science Foundation (No. 2012011011-4)+1 种基金Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi, China (No. 20121011)the Shanxi Province Science Foundation for Youths (No. 2012021015-4)
文摘Effective extraction of data association rules can provide a reliable basis for classification of stellar spectra. The concept of stellar spectrum weighted itemsets and stellar spectrum weighted association rules are introduced, and the weight of a single property in the stellar spectrum is determined by information entropy. On that basis, a method is presented to mine the association rules of a stellar spectrum based on the weighted frequent pattern tree. Important properties of the spectral line are highlighted using this method. At the same time, the waveform of the whole spectrum is taken into account. The experimental results show that the data association rules of a stellar spectrum mined with this method are consistent with the main features of stellar spectral types.
基金Project (No. 50578099) supported by the National Natural ScienceFoundation of China
文摘This paper presents some methods that the standard acceleration design response spectra derived from the present China code for seismic design of buildings are transformed into the seismic demand spectra, and that the base shear force-roof displacement curve of structure is converted to the capacity spectrum of an equivalent single-degree-of-freedom （SDOF） system. The capacity spectrum method （CSM） is programmed by means of MATLABT.0 computer language. A dual lateral force resisting system of 10-story steel frame-steel plate shear walls （SPSW） is designed according to the corresponding China design codes. The base shear force-roof displacement curve of structure subjected to the monotonic increasing lateral inverse triangular load is obtained by applying the equivalent strip model to stimulate SPSW and by using the finite element analysis software SAP2000 to make Pushover analysis. The seismic performance of this dual system subjected to three different conditions, i.e. the 8-intensity frequently occurred earthquake, fortification earthquake and seldom occurred earthquake, is evaluated by CSM program. The excessive safety of steel frame-SPSW system designed according to the present China design codes is pointed out and a new design method is suggested.
