A successful mechanical property data-driven prediction model is the core of the optimal design of hot rolling process for hot-rolled strips. However, the original industrial data, usually unbalanced, are inevitably m...A successful mechanical property data-driven prediction model is the core of the optimal design of hot rolling process for hot-rolled strips. However, the original industrial data, usually unbalanced, are inevitably mixed with fluctuant and abnormal values. Models established on the basis of the data without data processing can cause misleading results, which cannot be used for the optimal design of hot rolling process. Thus, a method of industrial data processing of C-Mn steel was proposed based on the data analysis. The Bayesian neural network was employed to establish the reliable mechanical property prediction models for the optimal design of hot rolling process. By using the multi-objective optimization algorithm and considering the individual requirements of costumers and the constraints of the equipment, the optimal design of hot rolling process was successfully applied to the rolling process design for Q345B steel with 0.017% Nb and 0.046% Ti content removed. The optimal process design results were in good agreement with the industrial trials results, which verify the effectiveness of the optimal design of hot rolling process.展开更多
Based on the remote sensing images of algae, the present work analyzes the horizontal distribution characteristics of algal blooms in Chaohu Lake, China, which also reveals the frequency of algal blooms under differen...Based on the remote sensing images of algae, the present work analyzes the horizontal distribution characteristics of algal blooms in Chaohu Lake, China, which also reveals the frequency of algal blooms under different wind directions. Further, an unstructured-grid, three-dimensional finite-volume coastal ocean model （FVCOM） is applied to investigate the wind-induced currents and the transport pro- cess to explain the reason why algal blooms occur at the detected places. We first deduce the primary distribution of biomass from overlaid satellite images, and explain the formation mechanism by analyzing the pollution sources, and simulating the flow field and transportation process under prevailing wind over Chaohu Lake. And then, we consider the adjustment action of the wind on the corresponding day and develop a two-time scale approach to describe the whole formation process of algae horizontal distribution in Chaohu Lake. That is, on the longer time scale, i.e., during bloom season, prevailing wind determines the primary distribution of biomass by inducing the characteristic flow field; on the shorter time scale, i.e., on the day when bloom occurs, the wind force adjusts the primary distribution of biomass to form the final distribution of algal bloom.展开更多
In recent years, Empirical mode decomposition and Hilbert spectral analysis have been combined to identify system parameters. Singular-Value Decomposition is pro- posed as a signal preprocessing technique of Hilbert-H...In recent years, Empirical mode decomposition and Hilbert spectral analysis have been combined to identify system parameters. Singular-Value Decomposition is pro- posed as a signal preprocessing technique of Hilbert-Huang Transform to extract modal parameters for closely spaced modes and low-energy components. The proposed method is applied to a simulated airplane model built in Automatic Dynamic Analysis of Mechanical Systems software. The results demonstrate that the identified modal parameters are in good agreement with the baseline model.展开更多
EVA plastic film is the key material for V-process. Through decades of research, special EVA film for V-process has been produced. The film has adequate elongation; its maximum is about 800% in longitudinal direction ...EVA plastic film is the key material for V-process. Through decades of research, special EVA film for V-process has been produced. The film has adequate elongation; its maximum is about 800% in longitudinal direction and 750% in transversal direction. The single width of the film is 2.8 m and the double width is 5.6 m, which is the widest sheet film for V-process in China. Sheets with different thickness ranging from the thickest 0.35 mm to the thinnest 0.08 mm can meet different demands in China. The film can be used not only for V-process of iron castings, but also for the manganese steel railway frog, steel rocking support and side frame castings for train and the steel bridge box for engine truck.展开更多
Sale-leaseback is paid special focus on for its great application in China in recent years.By giving a detailed analysis,an analysis of the features of sale-leaseback and a study of the risks of it are given in this p...Sale-leaseback is paid special focus on for its great application in China in recent years.By giving a detailed analysis,an analysis of the features of sale-leaseback and a study of the risks of it are given in this paper.Then a quantitative analysis of commercial real estate sale-leaseback is carried out.The scientific theoretical analysis is provided in this paper for risk assessment in commercial real estate sale-leaseback mode in China.An effective approach is put forward for sale-leaseback project evaluation and prevention of risk.A useful means is given to supervise commerciai real estate sale-leaseback mode for relevant departments and a certain contribution is made to a further sound development of commercial real estate sale-leaseback mode.展开更多
The bimetallic composite rods prepared by co-extrusion have good mechanical properties,but their compressive deformation behaviors have rarely been studied.This paper primarily investigates the compressive deformation...The bimetallic composite rods prepared by co-extrusion have good mechanical properties,but their compressive deformation behaviors have rarely been studied.This paper primarily investigates the compressive deformation behavior of the AZ31/Mg-Gd-Y composite rod,analyzes the differences between its compressive deformation behavior and that of AZ31,and systematically studies the compressive deformation mechanisms of various regions in the composite rod,as well as the texture evolution and{10-12}twin evolution during the compression process.The results reveal that the AZ31/Mg-Gd-Y composite rods exhibit excellent metallurgical bonding,with the interface remaining intact even under a 9%compressive strain.In the compression process,AZ31 initiates yielding earlier than the AZ31/Mg-Gd-Y composite rods,exhibiting a relatively lower yield strength,whereas both show comparable plasticity.The deformation behavior of the AZ31/Mg-Gd-Y composite rod is governed by a combination of basal a slip and{10-12}-1011 tension twinning during compression along the ED(extrusion direction).With increasing compressive strain,the number of{10-12}twins in the AZ31 region(A/G-AZ31)of the AZ31/Mg-Gd-Y composite rod increases significantly,leading to changes in grain orientation,whereas the Mg-Gd-Y region(A/G-Mg-Gd-Y)of the composite rod shows no significant change.In addition,the A/G-Mg-Gd-Y significantly inhibits the nucleation and growth of{10-12}twins in A/G-AZ31 during compression,and thus the texture hardening generated by{10-12}twins make the work hardening behavior of the AZ31/Mg-Gd-Y composite rods different from that of AZ31.展开更多
The air-flow’s states and ways acted on the technological process of chemical fiber are summed up, which includes chip drying, spinning quenching as well as airjet texturing (air texturing, tangling texturing and bul...The air-flow’s states and ways acted on the technological process of chemical fiber are summed up, which includes chip drying, spinning quenching as well as airjet texturing (air texturing, tangling texturing and bulked continuous filament (BCF)),and the effect of air-flow on the process and quality of chemical fiber is studied,and the action of mechanics and heat on the bulked continuous filament are calculated.展开更多
-In this paper, the outset, evolution and intensity of El Nino were analyzed. Different features were found in each El Nino process. The El Nino of 1986 was also analyzed and outlined.
Extracting, transportation and the using from fossil fuels can damage to the hydrosphere, the biosphere and the Earth＇s atmosphere. But humans always need to this valuable substance. The production of oil derivatives...Extracting, transportation and the using from fossil fuels can damage to the hydrosphere, the biosphere and the Earth＇s atmosphere. But humans always need to this valuable substance. The production of oil derivatives by means of forest waste and coal through the Fischer-Tropsch process is an appropriate solution for the cleanliness of all parts of the environment. For the production of favorite products by the synthesis of Fischer-Tropsch, the performance of the catalyst under different operating conditions should be predictable. For this reason, in this paper, eight mathematical models were determined for the selectivity of five products of methane, light hydrocarbons, gasoline, diesel and wax based on three factors of reduction temperature, time on stream, and He/CO ratio inlet gas on iron-based catalyst. The results showed that the reduction temperature factor had the most effective on the selectivity of hydrocarbon products, exception diesel, so that the increase of the reduction temperature led to increase of the selectivity of methane, light hydrocarbons, gasoline and reduce of the degree of selectivity of the wax and vice versa. For the diesel selectivity, factor of the He/CO ratio inlet gas was the most effective than other factors.展开更多
The northern Guangxi region is an important rare metal, rare earth metal and polymetallic metallogenic province. In the region there exist five metallogenic series and two metallogenic subseries, whose metallogenesis ...The northern Guangxi region is an important rare metal, rare earth metal and polymetallic metallogenic province. In the region there exist five metallogenic series and two metallogenic subseries, whose metallogenesis shows features of polycyclic spiral evolution throughout the geological history. As far as various cycles are concerned, mantle-derived ore substances were reduced while crust-derived ore substances increased from early to late timesfin the whole geological evolutionary history, mantle-derived substances decreased gradually while crust-derived ones increased. Meanwhile ore element associations became more and more varied. In terms of space, mineralization migrated from the old basement outwards, i.e. from west to east during the Precambrian, and from north to south during the Phanerozoic, and again from east to west during the Yanshanian.展开更多
YBa2Cu3O7-δ-Agx composite superconductors were prepared by hybrid sintering process using YBa2Cu3O7-δ-Agx ultrafine powder and Ag2O finepower, which were prepared by sol-gel process and precipitation process respect...YBa2Cu3O7-δ-Agx composite superconductors were prepared by hybrid sintering process using YBa2Cu3O7-δ-Agx ultrafine powder and Ag2O finepower, which were prepared by sol-gel process and precipitation process respectively. The effect of the Ag content on superconducting crictical transition temperature of YBa2Cu3O7-δ-Agx was not evident as long as YBa2Cu3O7-δ-Agx can form continuous network. But Ag can increase superconduction crictical current and density of the composite superconductors. The normal state (i.e. non-superconducting state at room temperature) resistivity shows a percolation threshold at 20%-30% Ag, whereas the superconducting net-work shows a percolationthreshold at 70% -80% Ag.展开更多
This review summarizes the general developments of the operational mesoscale model system based on the Global/Regional Assimilation and Prediction System-Tropical Monsoon Model (GRAPES-TMM) at the Guangzhou Regional M...This review summarizes the general developments of the operational mesoscale model system based on the Global/Regional Assimilation and Prediction System-Tropical Monsoon Model (GRAPES-TMM) at the Guangzhou Regional Meteorological Center. GRAPES-TMM consists of the Tropical Regional Atmospheric Model System for the South China Sea (TRAMS, a typhoon model with a horizontal resolution of 9 km), the Mesoscale Atmospheric Regional Model System (MARS, 3km) and the fine-scale Rapid Update Cycling (RUC, 1km) forecasting system. The main advances of model dynamical core and physical processes are summarized, including the development of the 3D reference atmosphere scheme, the coupling scheme between dynamics and model physics, the calculation of nonlinear terms by fractional steps, the gravity wave drag scheme induced by sub-grid orography and a simplified model for landsurface scheme. The progress of model applications is reviewed and evaluated. The results show that the updated 9-3-1forecasting system provides an overall improved performance on the weather forecasting in south China, especially for typhoon-genesis and typhoon-track forecasting as well as short-range weather forecasting. Capabilities and limitations as well as the future development of the forecasting system are also discussed.展开更多
The Zagros forests are a treasure of valuable oak forests, but they have been severely degraded from long-term misuse. Geographic information systems （GIS） and multi-criteria decision analysis （MCDA） have been inc...The Zagros forests are a treasure of valuable oak forests, but they have been severely degraded from long-term misuse. Geographic information systems （GIS） and multi-criteria decision analysis （MCDA） have been increasingly used to improve the management of vulnerable ecosystems to prevent further degradation and increase the sustainability of land use. This study presents a methodology to assess land suitability using remote sensing （RS） to obtain wall-to-wall data for the calculations, GIS to analyze the data, and MCDA to rank alternative land uses. The criteria and subcriteria affecting the suitability of land for different uses were identified and weighted using an analytic hierarchy process. Variables used as subcriteria were assessed using satellite data and other sources of information such as existing maps and field surveys. Numerical values for the subcriteria were classified, and each class was given a priority rating according to expert judgments. Based on the ratings and weights of the subcriteria, a priority map was created for each land use using the weighted linear combination method. The priority maps for different land uses were overlaid to obtain a preliminary land use map, which often indicated several simultaneous land uses for the same location. The preliminary map was further edited by removing unrealistic, mutually exclusive land-use combinations. The study tested and demonstrated the potential of integrating RS, G1S and MCDA techniques for solving complicated land allocation problems in forested regions using a scientifically sound and practical approach for efficient and sustainable allocation of forestland for different uses.展开更多
Based on Kohler’s ternary solution model and Miedemaa’s model for calculating the heats of formation-△Hij of binary Systems, the integral equation has ben established for calculating the activity coefficients in te...Based on Kohler’s ternary solution model and Miedemaa’s model for calculating the heats of formation-△Hij of binary Systems, the integral equation has ben established for calculating the activity coefficients in ternarysolution. With the equation, the activity coefficients in Ti-15-3 melt have been calculated. The results show that allof components’ activity coefficients are less than 1, in other wolds, compared with ideal solution, all components takeon a negative deviation. At 2000K, the activity coefficients in Ti-15-3 melt are shown as: about 0.9 for Ti, about0.85 for V, about 0. 1 for Al, aboaut 0.5 for Cr and about 0.23 for Sn. me addition of V lowers the activity coefficient of Ti, but raise the ones of Al, Cr and Sn. These results can be directly used to calculate the evaporation loss ofAl, Cr and Sn during the ISM(Induction Skull Melting) process and at the same time estimate the reactivity betweenTi-15-3 melt and refractory during the cast production.展开更多
An algorithm was developed for identifying and tracking a magnetic bright point, or bright point （BP） for short, observed in both the photosphere （G-band） and chromosphere （Ca II H）, as well as for pairing a pho...An algorithm was developed for identifying and tracking a magnetic bright point, or bright point （BP） for short, observed in both the photosphere （G-band） and chromosphere （Ca II H）, as well as for pairing a photospheric BP （PBP） with its conjugate chromospheric BP （CBP）. Two sets of data observed by Hinode/SOT in the quiet Sun near the disk center were analyzed. About 278 PBP-CBP pairs were identified and tracked. Lifetimes of both the PBPs and CBPs follow an exponential distribution with average lifetimes of 174 s and 163 s, respectively. We found that the differences in appearance time, in disappearance time and in lifetime of the two kinds of BPs all follow Gaussian distributions,which may indicate that the mechanisms of PBP and CBP formation/disintegration are different. However, the lifetimes of PBPs and CBPs are positively correlated with one another, with a correlation coefficient of 0.8. Furthermore, we calculated the horizontal displacement between the PBP and its conjugate CBP, which follows a Gaussian function with an average and standard deviation of （67.7 ± 38.5）km. We also calculated the amplitude of the flux tube shape change which might be caused by MHD waves propagating along the flux tube, and found that it follows an exponential distribution very well.展开更多
An accurate determination of the landing trajectory of Chang＇e-3 （CE-3） is significant for verifying orbital control strategy, optimizing orbital planning, accu- rately determining the landing site of CE-3 and anal...An accurate determination of the landing trajectory of Chang＇e-3 （CE-3） is significant for verifying orbital control strategy, optimizing orbital planning, accu- rately determining the landing site of CE-3 and analyzing the geological background of the landing site. Due to complexities involved in the landing process, there are some differences between the planned trajectory and the actual trajectory of CE-3. The land- ing camera on CE-3 recorded a sequence of the landing process with a frequency of 10 frames per second. These images recorded by the landing camera and high-resolution images of the lunar surface are utilized to calculate the position of the probe, so as to reconstruct its precise trajectory. This paper proposes using the method of trajectory reconstruction by Single Image Space Resection to make a detailed study of the hov- ering stage at a height of 100 m above the lunar surface. Analysis of the data shows that the closer CE-3 came to the lunar surface, the higher the spatial resolution of im- ages that were acquired became, and the more accurately the horizontal and vertical position of CE-3 could be determined. The horizontal and vertical accuracies were 7.09 m and 4.27 m respectively during the hovering stage at a height of 100.02 m. The reconstructed trajectory can reflect the change in CE-3＇s position during the powered descent process. A slight movement in CE-3 during the hovering stage is also clearly demonstrated. These results will provide a basis for analysis of orbit control strategy, and it will be conducive to adjustment and optimization of orbit control strategy in follow-up missions.展开更多
文摘A successful mechanical property data-driven prediction model is the core of the optimal design of hot rolling process for hot-rolled strips. However, the original industrial data, usually unbalanced, are inevitably mixed with fluctuant and abnormal values. Models established on the basis of the data without data processing can cause misleading results, which cannot be used for the optimal design of hot rolling process. Thus, a method of industrial data processing of C-Mn steel was proposed based on the data analysis. The Bayesian neural network was employed to establish the reliable mechanical property prediction models for the optimal design of hot rolling process. By using the multi-objective optimization algorithm and considering the individual requirements of costumers and the constraints of the equipment, the optimal design of hot rolling process was successfully applied to the rolling process design for Q345B steel with 0.017% Nb and 0.046% Ti content removed. The optimal process design results were in good agreement with the industrial trials results, which verify the effectiveness of the optimal design of hot rolling process.
基金supported by the Hundred Talents Program of Chinese Academy of Sciencesthe National Natural Science Fundation of China for Distinguished Young Scholar(10825211)
文摘Based on the remote sensing images of algae, the present work analyzes the horizontal distribution characteristics of algal blooms in Chaohu Lake, China, which also reveals the frequency of algal blooms under different wind directions. Further, an unstructured-grid, three-dimensional finite-volume coastal ocean model （FVCOM） is applied to investigate the wind-induced currents and the transport pro- cess to explain the reason why algal blooms occur at the detected places. We first deduce the primary distribution of biomass from overlaid satellite images, and explain the formation mechanism by analyzing the pollution sources, and simulating the flow field and transportation process under prevailing wind over Chaohu Lake. And then, we consider the adjustment action of the wind on the corresponding day and develop a two-time scale approach to describe the whole formation process of algae horizontal distribution in Chaohu Lake. That is, on the longer time scale, i.e., during bloom season, prevailing wind determines the primary distribution of biomass by inducing the characteristic flow field; on the shorter time scale, i.e., on the day when bloom occurs, the wind force adjusts the primary distribution of biomass to form the final distribution of algal bloom.
文摘In recent years, Empirical mode decomposition and Hilbert spectral analysis have been combined to identify system parameters. Singular-Value Decomposition is pro- posed as a signal preprocessing technique of Hilbert-Huang Transform to extract modal parameters for closely spaced modes and low-energy components. The proposed method is applied to a simulated airplane model built in Automatic Dynamic Analysis of Mechanical Systems software. The results demonstrate that the identified modal parameters are in good agreement with the baseline model.
文摘EVA plastic film is the key material for V-process. Through decades of research, special EVA film for V-process has been produced. The film has adequate elongation; its maximum is about 800% in longitudinal direction and 750% in transversal direction. The single width of the film is 2.8 m and the double width is 5.6 m, which is the widest sheet film for V-process in China. Sheets with different thickness ranging from the thickest 0.35 mm to the thinnest 0.08 mm can meet different demands in China. The film can be used not only for V-process of iron castings, but also for the manganese steel railway frog, steel rocking support and side frame castings for train and the steel bridge box for engine truck.
文摘Sale-leaseback is paid special focus on for its great application in China in recent years.By giving a detailed analysis,an analysis of the features of sale-leaseback and a study of the risks of it are given in this paper.Then a quantitative analysis of commercial real estate sale-leaseback is carried out.The scientific theoretical analysis is provided in this paper for risk assessment in commercial real estate sale-leaseback mode in China.An effective approach is put forward for sale-leaseback project evaluation and prevention of risk.A useful means is given to supervise commerciai real estate sale-leaseback mode for relevant departments and a certain contribution is made to a further sound development of commercial real estate sale-leaseback mode.
基金supported by National Natural Science Foundation of China(52274397 and 52374395)Shandong Provincial Natural Science Foundation of China(ZR2024JQ020).
文摘The bimetallic composite rods prepared by co-extrusion have good mechanical properties,but their compressive deformation behaviors have rarely been studied.This paper primarily investigates the compressive deformation behavior of the AZ31/Mg-Gd-Y composite rod,analyzes the differences between its compressive deformation behavior and that of AZ31,and systematically studies the compressive deformation mechanisms of various regions in the composite rod,as well as the texture evolution and{10-12}twin evolution during the compression process.The results reveal that the AZ31/Mg-Gd-Y composite rods exhibit excellent metallurgical bonding,with the interface remaining intact even under a 9%compressive strain.In the compression process,AZ31 initiates yielding earlier than the AZ31/Mg-Gd-Y composite rods,exhibiting a relatively lower yield strength,whereas both show comparable plasticity.The deformation behavior of the AZ31/Mg-Gd-Y composite rod is governed by a combination of basal a slip and{10-12}-1011 tension twinning during compression along the ED(extrusion direction).With increasing compressive strain,the number of{10-12}twins in the AZ31 region(A/G-AZ31)of the AZ31/Mg-Gd-Y composite rod increases significantly,leading to changes in grain orientation,whereas the Mg-Gd-Y region(A/G-Mg-Gd-Y)of the composite rod shows no significant change.In addition,the A/G-Mg-Gd-Y significantly inhibits the nucleation and growth of{10-12}twins in A/G-AZ31 during compression,and thus the texture hardening generated by{10-12}twins make the work hardening behavior of the AZ31/Mg-Gd-Y composite rods different from that of AZ31.
文摘The air-flow’s states and ways acted on the technological process of chemical fiber are summed up, which includes chip drying, spinning quenching as well as airjet texturing (air texturing, tangling texturing and bulked continuous filament (BCF)),and the effect of air-flow on the process and quality of chemical fiber is studied,and the action of mechanics and heat on the bulked continuous filament are calculated.
文摘-In this paper, the outset, evolution and intensity of El Nino were analyzed. Different features were found in each El Nino process. The El Nino of 1986 was also analyzed and outlined.
文摘Extracting, transportation and the using from fossil fuels can damage to the hydrosphere, the biosphere and the Earth＇s atmosphere. But humans always need to this valuable substance. The production of oil derivatives by means of forest waste and coal through the Fischer-Tropsch process is an appropriate solution for the cleanliness of all parts of the environment. For the production of favorite products by the synthesis of Fischer-Tropsch, the performance of the catalyst under different operating conditions should be predictable. For this reason, in this paper, eight mathematical models were determined for the selectivity of five products of methane, light hydrocarbons, gasoline, diesel and wax based on three factors of reduction temperature, time on stream, and He/CO ratio inlet gas on iron-based catalyst. The results showed that the reduction temperature factor had the most effective on the selectivity of hydrocarbon products, exception diesel, so that the increase of the reduction temperature led to increase of the selectivity of methane, light hydrocarbons, gasoline and reduce of the degree of selectivity of the wax and vice versa. For the diesel selectivity, factor of the He/CO ratio inlet gas was the most effective than other factors.
基金This research was supported by the Chinese Foundation for Development of Geological Science and Technology (Project 49273162)the National Natural Science Foundation of China(Project 49273162)
文摘The northern Guangxi region is an important rare metal, rare earth metal and polymetallic metallogenic province. In the region there exist five metallogenic series and two metallogenic subseries, whose metallogenesis shows features of polycyclic spiral evolution throughout the geological history. As far as various cycles are concerned, mantle-derived ore substances were reduced while crust-derived ore substances increased from early to late timesfin the whole geological evolutionary history, mantle-derived substances decreased gradually while crust-derived ones increased. Meanwhile ore element associations became more and more varied. In terms of space, mineralization migrated from the old basement outwards, i.e. from west to east during the Precambrian, and from north to south during the Phanerozoic, and again from east to west during the Yanshanian.
文摘YBa2Cu3O7-δ-Agx composite superconductors were prepared by hybrid sintering process using YBa2Cu3O7-δ-Agx ultrafine powder and Ag2O finepower, which were prepared by sol-gel process and precipitation process respectively. The effect of the Ag content on superconducting crictical transition temperature of YBa2Cu3O7-δ-Agx was not evident as long as YBa2Cu3O7-δ-Agx can form continuous network. But Ag can increase superconduction crictical current and density of the composite superconductors. The normal state (i.e. non-superconducting state at room temperature) resistivity shows a percolation threshold at 20%-30% Ag, whereas the superconducting net-work shows a percolationthreshold at 70% -80% Ag.
基金National Key R&D Program of China(2018YFC1506901)National Natural Science Foundation of China (41505084)Program of Science and Technology Department of Guangdong Province (201804020038)。
文摘This review summarizes the general developments of the operational mesoscale model system based on the Global/Regional Assimilation and Prediction System-Tropical Monsoon Model (GRAPES-TMM) at the Guangzhou Regional Meteorological Center. GRAPES-TMM consists of the Tropical Regional Atmospheric Model System for the South China Sea (TRAMS, a typhoon model with a horizontal resolution of 9 km), the Mesoscale Atmospheric Regional Model System (MARS, 3km) and the fine-scale Rapid Update Cycling (RUC, 1km) forecasting system. The main advances of model dynamical core and physical processes are summarized, including the development of the 3D reference atmosphere scheme, the coupling scheme between dynamics and model physics, the calculation of nonlinear terms by fractional steps, the gravity wave drag scheme induced by sub-grid orography and a simplified model for landsurface scheme. The progress of model applications is reviewed and evaluated. The results show that the updated 9-3-1forecasting system provides an overall improved performance on the weather forecasting in south China, especially for typhoon-genesis and typhoon-track forecasting as well as short-range weather forecasting. Capabilities and limitations as well as the future development of the forecasting system are also discussed.
文摘The Zagros forests are a treasure of valuable oak forests, but they have been severely degraded from long-term misuse. Geographic information systems （GIS） and multi-criteria decision analysis （MCDA） have been increasingly used to improve the management of vulnerable ecosystems to prevent further degradation and increase the sustainability of land use. This study presents a methodology to assess land suitability using remote sensing （RS） to obtain wall-to-wall data for the calculations, GIS to analyze the data, and MCDA to rank alternative land uses. The criteria and subcriteria affecting the suitability of land for different uses were identified and weighted using an analytic hierarchy process. Variables used as subcriteria were assessed using satellite data and other sources of information such as existing maps and field surveys. Numerical values for the subcriteria were classified, and each class was given a priority rating according to expert judgments. Based on the ratings and weights of the subcriteria, a priority map was created for each land use using the weighted linear combination method. The priority maps for different land uses were overlaid to obtain a preliminary land use map, which often indicated several simultaneous land uses for the same location. The preliminary map was further edited by removing unrealistic, mutually exclusive land-use combinations. The study tested and demonstrated the potential of integrating RS, G1S and MCDA techniques for solving complicated land allocation problems in forested regions using a scientifically sound and practical approach for efficient and sustainable allocation of forestland for different uses.
文摘Based on Kohler’s ternary solution model and Miedemaa’s model for calculating the heats of formation-△Hij of binary Systems, the integral equation has ben established for calculating the activity coefficients in ternarysolution. With the equation, the activity coefficients in Ti-15-3 melt have been calculated. The results show that allof components’ activity coefficients are less than 1, in other wolds, compared with ideal solution, all components takeon a negative deviation. At 2000K, the activity coefficients in Ti-15-3 melt are shown as: about 0.9 for Ti, about0.85 for V, about 0. 1 for Al, aboaut 0.5 for Cr and about 0.23 for Sn. me addition of V lowers the activity coefficient of Ti, but raise the ones of Al, Cr and Sn. These results can be directly used to calculate the evaporation loss ofAl, Cr and Sn during the ISM(Induction Skull Melting) process and at the same time estimate the reactivity betweenTi-15-3 melt and refractory during the cast production.
基金supported by the CAS grants(XDA17010507,XDA15010900 and QYZDJ-SSWSLH012)the NationalBasic Research Program of China(973 Program,2013CBA01503)+1 种基金the National Natural Science Foundation of China(Grant Nos.U1631130,11333007 and 11763004)supported by a grant associated with the Project of the Group for Innovation of Yunnan Province
文摘An algorithm was developed for identifying and tracking a magnetic bright point, or bright point （BP） for short, observed in both the photosphere （G-band） and chromosphere （Ca II H）, as well as for pairing a photospheric BP （PBP） with its conjugate chromospheric BP （CBP）. Two sets of data observed by Hinode/SOT in the quiet Sun near the disk center were analyzed. About 278 PBP-CBP pairs were identified and tracked. Lifetimes of both the PBPs and CBPs follow an exponential distribution with average lifetimes of 174 s and 163 s, respectively. We found that the differences in appearance time, in disappearance time and in lifetime of the two kinds of BPs all follow Gaussian distributions,which may indicate that the mechanisms of PBP and CBP formation/disintegration are different. However, the lifetimes of PBPs and CBPs are positively correlated with one another, with a correlation coefficient of 0.8. Furthermore, we calculated the horizontal displacement between the PBP and its conjugate CBP, which follows a Gaussian function with an average and standard deviation of （67.7 ± 38.5）km. We also calculated the amplitude of the flux tube shape change which might be caused by MHD waves propagating along the flux tube, and found that it follows an exponential distribution very well.
基金Supported by the National Natural Science Foundation of China
文摘An accurate determination of the landing trajectory of Chang＇e-3 （CE-3） is significant for verifying orbital control strategy, optimizing orbital planning, accu- rately determining the landing site of CE-3 and analyzing the geological background of the landing site. Due to complexities involved in the landing process, there are some differences between the planned trajectory and the actual trajectory of CE-3. The land- ing camera on CE-3 recorded a sequence of the landing process with a frequency of 10 frames per second. These images recorded by the landing camera and high-resolution images of the lunar surface are utilized to calculate the position of the probe, so as to reconstruct its precise trajectory. This paper proposes using the method of trajectory reconstruction by Single Image Space Resection to make a detailed study of the hov- ering stage at a height of 100 m above the lunar surface. Analysis of the data shows that the closer CE-3 came to the lunar surface, the higher the spatial resolution of im- ages that were acquired became, and the more accurately the horizontal and vertical position of CE-3 could be determined. The horizontal and vertical accuracies were 7.09 m and 4.27 m respectively during the hovering stage at a height of 100.02 m. The reconstructed trajectory can reflect the change in CE-3＇s position during the powered descent process. A slight movement in CE-3 during the hovering stage is also clearly demonstrated. These results will provide a basis for analysis of orbit control strategy, and it will be conducive to adjustment and optimization of orbit control strategy in follow-up missions.
