This paper reports a series solution of wave functions for two-dimensional scattering and diffraction of plane SH waves induced by a symmetrical V-shaped canyon with different shape ratios. A half-space with a symmetr...This paper reports a series solution of wave functions for two-dimensional scattering and diffraction of plane SH waves induced by a symmetrical V-shaped canyon with different shape ratios. A half-space with a symmetrical V-shaped canyon is divided into two sub-regions by using a circular-arc auxiliary boundary. The two sub-regions are represented by global and local cylindrical coordinate systems, respectively. In each coordinate system, the wave field satisfying the Helmholtz equation is represented by the separation of variables method, in terms of the series of both Bessel functions and Hankel functions with unknown complex coefficients. Then, the two wave fields are described in the local coordinate system using the Graf addition theorem. Finally, the unknown coefficients are sought by satisfying the continuity conditions of the auxiliary boundary. To consider the phase characteristics of the wave scattering, a parametric analysis is carried out in the time domain by assuming an incident signal of the Ricker type. Surface and subsurface transient responses demonstrate the characteristics and mechanisms of wave propagating and scattering.展开更多
The evolution and transition of planar wave trains propagating through defects(obstacles) in an excitable medium are studied. When the frequency of the planar wave trains is increased, three different dynamical regime...The evolution and transition of planar wave trains propagating through defects(obstacles) in an excitable medium are studied. When the frequency of the planar wave trains is increased, three different dynamical regimes,namely fusion, "V" waves, and spiral waves, are observed in turn and the underlying mechanism is discussed. The dynamics is concerned with the shapes of the defects. Circle, triangle, and rectangle defects with different sizes are considered. The increase of pacing frequency broadens the fan-shaped broken region in the behind of a rectangle defect.The increase of width of a triangle defect leads to breakup of wave trains easier while the change of height shows opposite effect, which is presented in a phase diagram. Dynamical comparison on defects with different shapes indicates that the decrease of the defect width along the propagation of wave trains makes the fan-shaped region and the minimal frequency for breakup of spiral both increased.展开更多
The re-entrant double-staggered ladder slow-wave structure is employed in a high-power V-band coupled-cavity traveling-wave tube. This structure has a wide bandwidth, a moderate interaction impedance, and excellent th...The re-entrant double-staggered ladder slow-wave structure is employed in a high-power V-band coupled-cavity traveling-wave tube. This structure has a wide bandwidth, a moderate interaction impedance, and excellent thermal dissipation properties, as well as easy fabrication. A well-matched waveguide coupler is proposed for the structure. Combining the design of attenuators, a full-scale three-dimensional circuit model for the V-band coupled-cavity traveling- wave tube is constructed. The electromagnetic characteristics and the beam wave interaction of this structure are investigated. The beam current is set to be 100 mA, and the cathode voltage is tuned from 16.8 kV to 15.8 kV. The calculation results show that this tube can produce a saturated average output power over 100 W with an instantaneous bandwidth greater than 1.25 GHz in the frequency ranging from 58 GHz to 62 GHz. The corresponding gain and electronic efficiency can reach over 32 dB and 6.5%, respectively.展开更多
A superposing principle, by suitably adding the strain waves from a number of concentrated explosive charges to approximate the waves generated by a cylindrical charge based on the strain wave of a point or small sphe...A superposing principle, by suitably adding the strain waves from a number of concentrated explosive charges to approximate the waves generated by a cylindrical charge based on the strain wave of a point or small spherical explosive charge generated in rock, is used to further study the triggering time of strain gauges installed in radial direction at same distances but different positions surrounding a cylindrical explosive charge in rock. The duration of the first compression phase and peak value of strain wave, and furthermore, their differences are analyzed and some explanations are given. Besides that, the gauge orientation in which the maximum peak value occurs is also discussed. At last, the effect of velocity of detonation(V.O.D.) of a cylindrical explosive charge on the strain waves generated in the surrounding rock is taken as key research and the pattern of peak amplitude of a strain wave varies with the V.O.D. is likely to have been found.展开更多
Background Right bundle branch block （RBBB） may present as slurred or notched S wave in lead V1. However, slurred or notched S wave may also represent slow conduction in the myocardium. Methods We retrospectively an...Background Right bundle branch block （RBBB） may present as slurred or notched S wave in lead V1. However, slurred or notched S wave may also represent slow conduction in the myocardium. Methods We retrospectively analyzed the QRS patterns in leads VgR to V5R in 7 patients with a slurred or notched S wave in lead V1. Results In the leads V3R to VSR, 6 patients showed incomplete or complete RBBB and 1 patient slurred or notched S wave. Conclusions In the majority of ECGs in a small patient series with slurred or notched S wave in lead V1, QRS morphology indicating incomplete or complete RBBB was present in leads V3R to VSR. A finding of fragmented QRS in these leads may indicate slow conduction in the myocardium.展开更多
An analytical method is developed for the study of the wave defending effects of the V-type bottom-mounted breakwater. The breakwater is assumed to be rigid, thin, impermeable and vertically located in water of consta...An analytical method is developed for the study of the wave defending effects of the V-type bottom-mounted breakwater. The breakwater is assumed to be rigid, thin, impermeable and vertically located in water of constant depth. The fluid domain is divided into three sub-regions by an imaginary interface. The velocity potential in each region is expanded by eigenfunctions. By satisfying the corresponding boundary conditions and matching conditions in and between sub-regions, a set of linear algebraic equations can be obtained to determine the unknown coefficients for the eigenfunction expansions for each sub-region. The accuracy of the present model is verified by a comparison with existing results for the case of an isolated breakwater. Numerical results, in the form of contour maps of the relative wave amplitude around the breakwater, are presented for a range of wave and breakwater parameters. The results show that the V-type bottom-mounted breakwater is generally effective in defending against waves. In general, the wave height in the protected area is about 20～50 percent of the incident wave height.展开更多
Wave pressure on the wet surface of a V-shaped floating breakwater in random seas is investigated. Considering the diffraction effect, the unit velocity potential caused by the single regular waves around the breakwat...Wave pressure on the wet surface of a V-shaped floating breakwater in random seas is investigated. Considering the diffraction effect, the unit velocity potential caused by the single regular waves around the breakwater is solved using the finite-depth Green function and boundary element method, in which the Green function is solved by integral method. The Response-Amplitude Operator(RAO) of wave pressure is acquired according to the Longuet-Higgins' wave model and the linear Bernoulli equation. Furthermore, the wave pressure's response spectrum is calculated according to the wave spectrum by discretizing the frequency domain. The wave pressure's characteristic value corresponding to certain cumulative probability is determined according to the Rayleigh distribution of wave heights. The numerical results and field test results are compared, which indicates that the wave pressure calculated in random seas agrees with that of field measurements. It is found that the bigger angle between legs will cause the bigger pressure response, while the increase in leg length does not influence the pressure significantly. The pressure at the side of head sea is larger than that of back waves. When the incident wave angle changes from 0? to 90?, the pressure at the side of back waves decreases clearly, while at the side of head sea, the situation is more complicated and there seems no obvious tendency. The concentration of wave energy around low frequency(long wavelength) will induce bigger wave pressure, and more attention should be paid to this situation for the structure safety.展开更多
We estimated crustal v p/ v s ratio of Tibetan Plateau by combined inversion of Love and Rayleigh wave dispersion data. It is developed by us that the joint inversion methods using both Love and Rayleigh wave dispersi...We estimated crustal v p/ v s ratio of Tibetan Plateau by combined inversion of Love and Rayleigh wave dispersion data. It is developed by us that the joint inversion methods using both Love and Rayleigh wave dispersion data. Thickness and S\|wave velocity of each sub layer are taken from Love wave dispersion data, then P\|wave velocity structure was deduced using Rayleigh wave dispersion data. Densities of sub layers were estimated by the empirical relationships between seismic velocity and rock density. Having S\| and P\|wave velocities, v p/ v s ratio is calculated for each sub layer. Six sub layers in crust of Tibetan Plateau has been identified, which are 0～8km, 8～30km, 30～40km, 40～62km, 62～68km and 68～75km respectively. The S\|wave velocity structure of the Plateau is 3 13, 3 32, 3 15, 3 92, 3 45 and 3 87 km/s for each sub layer; and P\|wave velocities are 6 00, 6 10, 5 72, 6 35, 6 78 and 6 64km/s respectively v p/ v s ratios in sub layers are 1 92, 1 84, 1 82, 1 62, 1 96 and 1 72; and corresponding Poisson ratios are 0 31, 0 29, 0 28, 0 19, 0 32 and 0 24. Our result on Poisson ratios of Tibetan crust was supported by seismic waveform modelling by Rodgers and Schwartz (1998).展开更多
The study on a miniaturized, low-voltage, wide-bandwidth, high-efficiency modified V-shaped microstrip meander-line slow-wave structure is presented. This structure is evolved from the original U-shaped microstrip mea...The study on a miniaturized, low-voltage, wide-bandwidth, high-efficiency modified V-shaped microstrip meander-line slow-wave structure is presented. This structure is evolved from the original U-shaped microstrip meander-line slow-wave structure, combining the advantages of a traditional microstrip and a rectangular helix. In this paper, simulations of the electromagnetic characteristics and the beam-wave interaction of this structure are carried out. Our study shows that when the design voltage and the current of a sheet electron beam are set to be 4700 V and 100 mA, respectively, this miniature millimeter-wave power amplifier is capable of delivering 160-W output power with a corresponding gain of 37.3 dB and a maximum interaction efficiency of 34% at 97 GHz.展开更多
A technique based on reduction of order for solving ordinary differential equations is developed to find exact solutions for a generalized KdV-mKdV equation that possesses high order nonlinear terms. The analytical ex...A technique based on reduction of order for solving ordinary differential equations is developed to find exact solutions for a generalized KdV-mKdV equation that possesses high order nonlinear terms. The analytical expressions of several types of traveUing wave solutions for the equation are obtained in terms of sin, cos, tan, cot, sinh, cosh, tanh, coth and algebraic profiles. It is shown that the wave speed of travelling wave solutions and the coefficient of low order derivative term in the equation are two main factors to determine the change in the physical structures of solutions.展开更多
基金National Natural Science Foundation of China Under Grant No.51278382
文摘This paper reports a series solution of wave functions for two-dimensional scattering and diffraction of plane SH waves induced by a symmetrical V-shaped canyon with different shape ratios. A half-space with a symmetrical V-shaped canyon is divided into two sub-regions by using a circular-arc auxiliary boundary. The two sub-regions are represented by global and local cylindrical coordinate systems, respectively. In each coordinate system, the wave field satisfying the Helmholtz equation is represented by the separation of variables method, in terms of the series of both Bessel functions and Hankel functions with unknown complex coefficients. Then, the two wave fields are described in the local coordinate system using the Graf addition theorem. Finally, the unknown coefficients are sought by satisfying the continuity conditions of the auxiliary boundary. To consider the phase characteristics of the wave scattering, a parametric analysis is carried out in the time domain by assuming an incident signal of the Ricker type. Surface and subsurface transient responses demonstrate the characteristics and mechanisms of wave propagating and scattering.
基金Supported by the Natural Science Foundation of Zhejiang Province under Grant Nos.LQ14A050003 and LR17A050001Zhejiang Province Commonweal Projects under Grant No.GK180906288001China Scholarship Council under Grant No.201708330401
文摘The evolution and transition of planar wave trains propagating through defects(obstacles) in an excitable medium are studied. When the frequency of the planar wave trains is increased, three different dynamical regimes,namely fusion, "V" waves, and spiral waves, are observed in turn and the underlying mechanism is discussed. The dynamics is concerned with the shapes of the defects. Circle, triangle, and rectangle defects with different sizes are considered. The increase of pacing frequency broadens the fan-shaped broken region in the behind of a rectangle defect.The increase of width of a triangle defect leads to breakup of wave trains easier while the change of height shows opposite effect, which is presented in a phase diagram. Dynamical comparison on defects with different shapes indicates that the decrease of the defect width along the propagation of wave trains makes the fan-shaped region and the minimal frequency for breakup of spiral both increased.
基金Project supported by the National Science Fund for Distinguished Young Scholars of China (Grant No. 61125103)the Vacuum Electronics National Lab Foundation, China (Grant No. 9140C050101110C0501)the Fundamental Research Funds for the Central Universities, China (Grant Nos. ZYGX2009Z003 and ZYGX2010J054)
文摘The re-entrant double-staggered ladder slow-wave structure is employed in a high-power V-band coupled-cavity traveling-wave tube. This structure has a wide bandwidth, a moderate interaction impedance, and excellent thermal dissipation properties, as well as easy fabrication. A well-matched waveguide coupler is proposed for the structure. Combining the design of attenuators, a full-scale three-dimensional circuit model for the V-band coupled-cavity traveling- wave tube is constructed. The electromagnetic characteristics and the beam wave interaction of this structure are investigated. The beam current is set to be 100 mA, and the cathode voltage is tuned from 16.8 kV to 15.8 kV. The calculation results show that this tube can produce a saturated average output power over 100 W with an instantaneous bandwidth greater than 1.25 GHz in the frequency ranging from 58 GHz to 62 GHz. The corresponding gain and electronic efficiency can reach over 32 dB and 6.5%, respectively.
基金Projects(51304239,51374243)supported by the National Natural Science Foundation of China
文摘A superposing principle, by suitably adding the strain waves from a number of concentrated explosive charges to approximate the waves generated by a cylindrical charge based on the strain wave of a point or small spherical explosive charge generated in rock, is used to further study the triggering time of strain gauges installed in radial direction at same distances but different positions surrounding a cylindrical explosive charge in rock. The duration of the first compression phase and peak value of strain wave, and furthermore, their differences are analyzed and some explanations are given. Besides that, the gauge orientation in which the maximum peak value occurs is also discussed. At last, the effect of velocity of detonation(V.O.D.) of a cylindrical explosive charge on the strain waves generated in the surrounding rock is taken as key research and the pattern of peak amplitude of a strain wave varies with the V.O.D. is likely to have been found.
文摘Background Right bundle branch block （RBBB） may present as slurred or notched S wave in lead V1. However, slurred or notched S wave may also represent slow conduction in the myocardium. Methods We retrospectively analyzed the QRS patterns in leads VgR to V5R in 7 patients with a slurred or notched S wave in lead V1. Results In the leads V3R to VSR, 6 patients showed incomplete or complete RBBB and 1 patient slurred or notched S wave. Conclusions In the majority of ECGs in a small patient series with slurred or notched S wave in lead V1, QRS morphology indicating incomplete or complete RBBB was present in leads V3R to VSR. A finding of fragmented QRS in these leads may indicate slow conduction in the myocardium.
文摘An analytical method is developed for the study of the wave defending effects of the V-type bottom-mounted breakwater. The breakwater is assumed to be rigid, thin, impermeable and vertically located in water of constant depth. The fluid domain is divided into three sub-regions by an imaginary interface. The velocity potential in each region is expanded by eigenfunctions. By satisfying the corresponding boundary conditions and matching conditions in and between sub-regions, a set of linear algebraic equations can be obtained to determine the unknown coefficients for the eigenfunction expansions for each sub-region. The accuracy of the present model is verified by a comparison with existing results for the case of an isolated breakwater. Numerical results, in the form of contour maps of the relative wave amplitude around the breakwater, are presented for a range of wave and breakwater parameters. The results show that the V-type bottom-mounted breakwater is generally effective in defending against waves. In general, the wave height in the protected area is about 20～50 percent of the incident wave height.
基金supported by the Science Fund for Creative Research Groups of the National Natural Science Foundation of China(Grant no.51021004)the Research Fund of State Key Laboratory in Ocean Engineering of Shanghai Jiaotong University(Grant no.1104)the Scientific Research Foundation of Civil Aviation University of China(Grant no.09QD08X)
文摘Wave pressure on the wet surface of a V-shaped floating breakwater in random seas is investigated. Considering the diffraction effect, the unit velocity potential caused by the single regular waves around the breakwater is solved using the finite-depth Green function and boundary element method, in which the Green function is solved by integral method. The Response-Amplitude Operator(RAO) of wave pressure is acquired according to the Longuet-Higgins' wave model and the linear Bernoulli equation. Furthermore, the wave pressure's response spectrum is calculated according to the wave spectrum by discretizing the frequency domain. The wave pressure's characteristic value corresponding to certain cumulative probability is determined according to the Rayleigh distribution of wave heights. The numerical results and field test results are compared, which indicates that the wave pressure calculated in random seas agrees with that of field measurements. It is found that the bigger angle between legs will cause the bigger pressure response, while the increase in leg length does not influence the pressure significantly. The pressure at the side of head sea is larger than that of back waves. When the incident wave angle changes from 0? to 90?, the pressure at the side of back waves decreases clearly, while at the side of head sea, the situation is more complicated and there seems no obvious tendency. The concentration of wave energy around low frequency(long wavelength) will induce bigger wave pressure, and more attention should be paid to this situation for the structure safety.
文摘We estimated crustal v p/ v s ratio of Tibetan Plateau by combined inversion of Love and Rayleigh wave dispersion data. It is developed by us that the joint inversion methods using both Love and Rayleigh wave dispersion data. Thickness and S\|wave velocity of each sub layer are taken from Love wave dispersion data, then P\|wave velocity structure was deduced using Rayleigh wave dispersion data. Densities of sub layers were estimated by the empirical relationships between seismic velocity and rock density. Having S\| and P\|wave velocities, v p/ v s ratio is calculated for each sub layer. Six sub layers in crust of Tibetan Plateau has been identified, which are 0～8km, 8～30km, 30～40km, 40～62km, 62～68km and 68～75km respectively. The S\|wave velocity structure of the Plateau is 3 13, 3 32, 3 15, 3 92, 3 45 and 3 87 km/s for each sub layer; and P\|wave velocities are 6 00, 6 10, 5 72, 6 35, 6 78 and 6 64km/s respectively v p/ v s ratios in sub layers are 1 92, 1 84, 1 82, 1 62, 1 96 and 1 72; and corresponding Poisson ratios are 0 31, 0 29, 0 28, 0 19, 0 32 and 0 24. Our result on Poisson ratios of Tibetan crust was supported by seismic waveform modelling by Rodgers and Schwartz (1998).
基金Project supported by the National Natural Science Foundation of China (Grant No. 60971038)the Fundamental Research Funds for the Central Universities (Grant No. ZYGX2009Z003)
文摘The study on a miniaturized, low-voltage, wide-bandwidth, high-efficiency modified V-shaped microstrip meander-line slow-wave structure is presented. This structure is evolved from the original U-shaped microstrip meander-line slow-wave structure, combining the advantages of a traditional microstrip and a rectangular helix. In this paper, simulations of the electromagnetic characteristics and the beam-wave interaction of this structure are carried out. Our study shows that when the design voltage and the current of a sheet electron beam are set to be 4700 V and 100 mA, respectively, this miniature millimeter-wave power amplifier is capable of delivering 160-W output power with a corresponding gain of 37.3 dB and a maximum interaction efficiency of 34% at 97 GHz.
基金The SWUFE’s Key Subject Construction Item Funds of the 211 Projectthe Scientific Research Foundation for Returned Scholars,Ministry of Education of China(No.200809011045)
文摘A technique based on reduction of order for solving ordinary differential equations is developed to find exact solutions for a generalized KdV-mKdV equation that possesses high order nonlinear terms. The analytical expressions of several types of traveUing wave solutions for the equation are obtained in terms of sin, cos, tan, cot, sinh, cosh, tanh, coth and algebraic profiles. It is shown that the wave speed of travelling wave solutions and the coefficient of low order derivative term in the equation are two main factors to determine the change in the physical structures of solutions.
