The thioacetamide derivative(TD)-composite preservation system(TDCPS)exhibits superior preservation effects on natural rubber latex(NRL)and significantly enhances its vulcanization efficiency and mechanical properties...The thioacetamide derivative(TD)-composite preservation system(TDCPS)exhibits superior preservation effects on natural rubber latex(NRL)and significantly enhances its vulcanization efficiency and mechanical properties.This study primarily investigated the principal chemical groups and mechanism of action of TDCPS in promoting NRL vulcanization through a comparative analysis.The results indicated that the key functional groups(thioamide and pyridine)in TDCPS synergistically accelerated crosslinking,reducing the vulcanization time by 41.18%compared to the high-ammonia(HA)preservation system.At an optimal TDCPS dosage of 5 mmol·L^(−1),vulcanized films achieved a tensile strength of 34.18 MPa,with a sulfur content of 1.5 phr further improving the strength by 42.26%.TD outperformed the conventional accelerators 2-imidazolidinethione(ETU)and 3-hydroxypyridine(3-Hp)in promoting the crosslinking density and mechanical performance while eliminating ammonia-related environmental risks.This eco-friendly system demonstrates the industrial potential for sustainable rubber production.展开更多
This study delves into the pivotal role of sulfur vulcanization in defining the mechanical characteristics of natural rubber(NR)latex-dipped products.Utilizing sulfur vulcanization,known for its operational simplicity...This study delves into the pivotal role of sulfur vulcanization in defining the mechanical characteristics of natural rubber(NR)latex-dipped products.Utilizing sulfur vulcanization,known for its operational simplicity and cost-effectiveness,we examine its ability to enhance product elasticity and mechanical strength through various sulfidic bond formations such as mono-,di-,and polysulfidic bonds.Different vulcanization systems and sulfur contents were evaluated for their influence on the mechanical attributes of latex films,employing three types of NR latex,namely concentrated NR(CNR),deproteinized NR(DPNR),and small rubber particle NR(SRP),each representing distinct non-rubber components(NRCs).The study utilized advanced atomic force microscopy(AFM)equipped with PeakForce Quantitative Nanomechanical Mapping(QNM)to visualize and measure Young’s modulus distribution across the film of pre-vulcanized latex.Our findings reveal that films by CNR processed using the conventional vulcanization(CV)system exhibited enhanced tensile strength and elongation at break.It even showed a lower crosslink density than those processed using the efficient vulcanization(EV)system.Interestingly,DPNR films showed a more uniform distribution of Young’s modulus,correlating well with their superior mechanical strength.In contrast,SRP films showed excessive network structure formation in the particles due to accelerated vulcanization rates,hampering subsequent post-vulcanization interparticle crosslinking in film formation and remaining more rigid.The overall results Illustrate clearly that the ultimate mechanical properties of the latex films are strongly dependent on the type of sulfidic bonds formed.This research reveals further the very intricate relationship between the vulcanization methods,sulfur content,and latex type in optimizing the mechanical performance of NR latex products.It provides valuable insights for industry practices aimed at improving the quality and performance of latex-dipped goods.展开更多
A composite electrocatalyst,CoMoNiO-S/NF-110(NF is nickel foam),was synthesized through electrodeposition,followed by pyrolysis and then the vulcanization process.CoMoNiO-S/NF-110 exhibited a structure where Ni3S2 and...A composite electrocatalyst,CoMoNiO-S/NF-110(NF is nickel foam),was synthesized through electrodeposition,followed by pyrolysis and then the vulcanization process.CoMoNiO-S/NF-110 exhibited a structure where Ni3S2 and Mo2S3 nanoparticles were integrated at the edges of Co3O4 nanosheets,creating a rich,heterogeneous interface that enhances the synergistic effects of each component.In an alkaline electrolyte,the synthesized CoMoNiO-S/NF-110 exhibited superior electrocatalytic performance for oxygen evolution reaction(OER),achieving current densities of 100 and 200 mA·cm^(-2) with low overpotentials of 199.4 and 224.4 mV,respectively,outperforming RuO2 and several high-performance Mo and Ni-based catalysts.This excellent performance is attributed to the rich interface formed between the components and active sites exposed by the defect structure.展开更多
Kinetics of natural rubber （NR） vulcanization by lanthanum O, O＇-diisopropyldithiophosphate [ La（DiPDP）3 ] was studied. La（DiPDP）3 had remarkable accelerating effect on the vulcanization of NR. The rate constan...Kinetics of natural rubber （NR） vulcanization by lanthanum O, O＇-diisopropyldithiophosphate [ La（DiPDP）3 ] was studied. La（DiPDP）3 had remarkable accelerating effect on the vulcanization of NR. The rate constant k6 of the reaction that turned polysulphidic cross-links into the modified main chain was higher than that of desulfuration reaction of polysulfidic cross-links （k3 ）. The activation energies （Ea2, Ea3, and Ea6） of the formation, desulfuration, and decomposition of polysulfidic cross-links were 87.57,102.34, and 95.01 kJ · mol^-1, respectively. Activation energy （Eas） of the reaction that turned the cross-link precursors into the modified main chain was 82.67 kJ · mol^-1. It could be concluded that the proportion of polysulphidic cross-links was higher than mono- and di- sulphidic cross-links during induction and curing periods, mono- and di- sulphidic cross-links increased as curing temperature rose. In the temperature range of 140 - 160 ℃, the amounts of polysulphidic cross-links were similar. However, over 160℃, mono- and di- sulphidic cross-links increased rapidly. Moreover, cross-link density of the vulcanizates was determined from the equilibrium-swelling data. A chemical probe detected the concentration of polysulphidic cross-links of vulcanizates. The change trend of the results predicated from equation corresponded to that of the experimental results.展开更多
The fabrication of magnetorheological （MR） elastomers was studied by two vulcanization methods, including heat vulcanization （HV） and radiation vulcanization （RV）, were employed to fabricate MRE samples. The dyn...The fabrication of magnetorheological （MR） elastomers was studied by two vulcanization methods, including heat vulcanization （HV） and radiation vulcanization （RV）, were employed to fabricate MRE samples. The dynamical mechanical properties were characterized by using a dynamic mechanic analyzer. In particular, both the MR effect and its durability were investigated. The experimental results showed that RV samples have large magnetoinduced modulus, large zero-field modulus, and good durability property of MR effect. To explain these results, cubic deformation and plasticizer migration were analyzed. Large magneto-induced modulus of RV sample results from cubic deformation during vulcanization process. And the plasticizer migration results in better durability of MR effect.展开更多
According to the vulcanization kinetic equation of natural rubber （NR） established in the isothermal situation, the numerical computation expression of the degree of cure under non-isothermal condition is constructe...According to the vulcanization kinetic equation of natural rubber （NR） established in the isothermal situation, the numerical computation expression of the degree of cure under non-isothermal condition is constructed by means of incremental method. The description of non-isothermal in-mold vulcanization process is carried out by the finite element method. The mold-opening time, the rubber and mold temperatures, the degree of rubber cure and its distribution characteristics are numerically analyzed, by changing the key formulas and parameters in the process including the temperature of curing medium, the concentration of 2-mercaptobenzothiazole, the heat transfer manner of mold side, and the convective heat transfer coefficient of heating boundary. The quantitative results will help engineers to design proper formulas and optimize processing conditions.展开更多
A novel TU derivative, N-phenyl-N＇-（γ-triethoxysilane）-propyl thiourea （STU）, is prepared and its binary accelerator system is investigated in detail. Compared to the control references, the optimum curing time ...A novel TU derivative, N-phenyl-N＇-（γ-triethoxysilane）-propyl thiourea （STU）, is prepared and its binary accelerator system is investigated in detail. Compared to the control references, the optimum curing time of NR compounds with STU is the shortest, indicating a more nucleophilic reaction occurs. The Py-GC/MS results present that the phenyl iso- thiocyanate fragment still remains in the NPUSTU compounds with or without extracting treatment, but no silane segment can be found in the vulcanizate with extracting treatment. Vibrations of C=S, NH and aromatic ring in FTIR experiments and a new methyne carbon peak, as well as the peaks of phenyl group of STU, in the solid state 13C-NMR experiments are found in the NR/STU vulcanizate with extracting treatment. Moreover, the crosslinking density of vulcanizates with STU evolves to lower level, indicating the sulfur atom of STU does not contribute to the sulfur crosslinking. Therefore, a new vulcanization kinetic mechanism of STU is propounded that the thiourea groups can graft to the rubber main chains as pendant groups by chemical bonds during the vulcanization process, which is in accordance with the experimental observations quite well.展开更多
This paper presents the influence of graphene on the vulcanization kinetics of styrene butadiene rubber （SBR） with dicumyl peroxide. A curemeter and a differential scanning calorimeter were used to investigate the c...This paper presents the influence of graphene on the vulcanization kinetics of styrene butadiene rubber （SBR） with dicumyl peroxide. A curemeter and a differential scanning calorimeter were used to investigate the cure kinetics, from which the kinetic parameters and apparent activation energy were obtained. It turns out that with increasing graphene loading, the induction period of the vulcanization process of SBR is remarkably reduced at low graphene loading and then levels off; on the other hand, the optimum cure time shows a monotonous decrease. As a result, the vulcanization rate is suppressed at first and then accelerated, and the corresponding activation energy increases slightly at first and then decreases. Upon adding graphene, the crosslinking density of the nanocomposites increases, because graphene takes part in the vulcanization process.展开更多
Allyl terminated polyether was used to improve the hydrophilicity of addition-cured room temperature vulcanization silicone rubber. With the increasing of the polyether, both the hydrophilicity and water absorbed of t...Allyl terminated polyether was used to improve the hydrophilicity of addition-cured room temperature vulcanization silicone rubber. With the increasing of the polyether, both the hydrophilicity and water absorbed of the vulcanizates were increased. The mechanical properties were also improved by adding the polyether. The result showed that 1.5wt% of the polyether provided the silicone rubber with proper hydrophilicity.展开更多
In order to reduce the temperature difference caused by condensed water in vulcanized tire capsules,the flow field and temperature field inside vulcanized tire capsules were numerically simulated by setting three diff...In order to reduce the temperature difference caused by condensed water in vulcanized tire capsules,the flow field and temperature field inside vulcanized tire capsules were numerically simulated by setting three different intake angles based onvolume of fluid(VOF)multiphase flow model.When the intake air is blown to the upper and lower tire sides of the vulcanized capsule at 18°from the horizontal direction,the distribution of condensed water at the bottom of the capsule changes obviously due to the effect of vorticity flow,and the distribution along the wall is more uniform.When the inlet air is blown down the tire side,the condensate is most evenly distributed along the wall,and the maximum temperature difference drops to 9.5℃.The results show that changing the distribution of condensed water by adjusting the proper intake angle can effectively reduce the temperature difference of condensed water in vulcanized capsules.展开更多
In this paper,the natural rubber is chosen as the main constituents for the transition layer of all-steel load radial tyre,which is pre-vulcanized by 500-keV E-beam irradiation of up to 60 kGy.The results show that th...In this paper,the natural rubber is chosen as the main constituents for the transition layer of all-steel load radial tyre,which is pre-vulcanized by 500-keV E-beam irradiation of up to 60 kGy.The results show that the green strength of transitional layer increases with the dose,reaching four times as much as the control(without irradiation) at 60 kGy.The final mechanical properties do not differ significantly from those of the control except that the aging and fatigue performance increased.However,thickness of the natural rubber transitional layer for an average single tyre can be reduced by 1 mm(or 1.5 kg) without obvious adverse effect on tyre performance.展开更多
基金the Ministry of Agriculture and Rural Affairs of Chinathe Department of Science and Technology of the Hainan Province for their support+2 种基金financially supported by the National Key R&D Program of China(No. 2022YFD2301201)Hainan Province Science and Technology Special Fund (No. ZDYF2024XDNY284)Earmarked Fund for China Agriculture Research System (No.CARS-33-JG1)
文摘The thioacetamide derivative(TD)-composite preservation system(TDCPS)exhibits superior preservation effects on natural rubber latex(NRL)and significantly enhances its vulcanization efficiency and mechanical properties.This study primarily investigated the principal chemical groups and mechanism of action of TDCPS in promoting NRL vulcanization through a comparative analysis.The results indicated that the key functional groups(thioamide and pyridine)in TDCPS synergistically accelerated crosslinking,reducing the vulcanization time by 41.18%compared to the high-ammonia(HA)preservation system.At an optimal TDCPS dosage of 5 mmol·L^(−1),vulcanized films achieved a tensile strength of 34.18 MPa,with a sulfur content of 1.5 phr further improving the strength by 42.26%.TD outperformed the conventional accelerators 2-imidazolidinethione(ETU)and 3-hydroxypyridine(3-Hp)in promoting the crosslinking density and mechanical performance while eliminating ammonia-related environmental risks.This eco-friendly system demonstrates the industrial potential for sustainable rubber production.
基金supported by Mahidol University(Fundamental Fund:fiscal year 2024 by the National Science Research and Innovation Fund(NSRF),FF-078/2567)Academy of Tropical Agricultural Sciences for Science and Technology Innovation Team of National Tropical Agricultural Science Center(No.CATASCXTD202401)the National Research Council of Thailand(NRCT)via the Royal Golden Jubilee Ph.D.Program(No.PHD/0150/2560)。
文摘This study delves into the pivotal role of sulfur vulcanization in defining the mechanical characteristics of natural rubber(NR)latex-dipped products.Utilizing sulfur vulcanization,known for its operational simplicity and cost-effectiveness,we examine its ability to enhance product elasticity and mechanical strength through various sulfidic bond formations such as mono-,di-,and polysulfidic bonds.Different vulcanization systems and sulfur contents were evaluated for their influence on the mechanical attributes of latex films,employing three types of NR latex,namely concentrated NR(CNR),deproteinized NR(DPNR),and small rubber particle NR(SRP),each representing distinct non-rubber components(NRCs).The study utilized advanced atomic force microscopy(AFM)equipped with PeakForce Quantitative Nanomechanical Mapping(QNM)to visualize and measure Young’s modulus distribution across the film of pre-vulcanized latex.Our findings reveal that films by CNR processed using the conventional vulcanization(CV)system exhibited enhanced tensile strength and elongation at break.It even showed a lower crosslink density than those processed using the efficient vulcanization(EV)system.Interestingly,DPNR films showed a more uniform distribution of Young’s modulus,correlating well with their superior mechanical strength.In contrast,SRP films showed excessive network structure formation in the particles due to accelerated vulcanization rates,hampering subsequent post-vulcanization interparticle crosslinking in film formation and remaining more rigid.The overall results Illustrate clearly that the ultimate mechanical properties of the latex films are strongly dependent on the type of sulfidic bonds formed.This research reveals further the very intricate relationship between the vulcanization methods,sulfur content,and latex type in optimizing the mechanical performance of NR latex products.It provides valuable insights for industry practices aimed at improving the quality and performance of latex-dipped goods.
文摘A composite electrocatalyst,CoMoNiO-S/NF-110(NF is nickel foam),was synthesized through electrodeposition,followed by pyrolysis and then the vulcanization process.CoMoNiO-S/NF-110 exhibited a structure where Ni3S2 and Mo2S3 nanoparticles were integrated at the edges of Co3O4 nanosheets,creating a rich,heterogeneous interface that enhances the synergistic effects of each component.In an alkaline electrolyte,the synthesized CoMoNiO-S/NF-110 exhibited superior electrocatalytic performance for oxygen evolution reaction(OER),achieving current densities of 100 and 200 mA·cm^(-2) with low overpotentials of 199.4 and 224.4 mV,respectively,outperforming RuO2 and several high-performance Mo and Ni-based catalysts.This excellent performance is attributed to the rich interface formed between the components and active sites exposed by the defect structure.
基金Project supported by the Guangdong Natural Science Foundation (05006563)
文摘Kinetics of natural rubber （NR） vulcanization by lanthanum O, O＇-diisopropyldithiophosphate [ La（DiPDP）3 ] was studied. La（DiPDP）3 had remarkable accelerating effect on the vulcanization of NR. The rate constant k6 of the reaction that turned polysulphidic cross-links into the modified main chain was higher than that of desulfuration reaction of polysulfidic cross-links （k3 ）. The activation energies （Ea2, Ea3, and Ea6） of the formation, desulfuration, and decomposition of polysulfidic cross-links were 87.57,102.34, and 95.01 kJ · mol^-1, respectively. Activation energy （Eas） of the reaction that turned the cross-link precursors into the modified main chain was 82.67 kJ · mol^-1. It could be concluded that the proportion of polysulphidic cross-links was higher than mono- and di- sulphidic cross-links during induction and curing periods, mono- and di- sulphidic cross-links increased as curing temperature rose. In the temperature range of 140 - 160 ℃, the amounts of polysulphidic cross-links were similar. However, over 160℃, mono- and di- sulphidic cross-links increased rapidly. Moreover, cross-link density of the vulcanizates was determined from the equilibrium-swelling data. A chemical probe detected the concentration of polysulphidic cross-links of vulcanizates. The change trend of the results predicated from equation corresponded to that of the experimental results.
基金The work was supported by the National Natural Science Foundation of China （No.10672154）.
文摘The fabrication of magnetorheological （MR） elastomers was studied by two vulcanization methods, including heat vulcanization （HV） and radiation vulcanization （RV）, were employed to fabricate MRE samples. The dynamical mechanical properties were characterized by using a dynamic mechanic analyzer. In particular, both the MR effect and its durability were investigated. The experimental results showed that RV samples have large magnetoinduced modulus, large zero-field modulus, and good durability property of MR effect. To explain these results, cubic deformation and plasticizer migration were analyzed. Large magneto-induced modulus of RV sample results from cubic deformation during vulcanization process. And the plasticizer migration results in better durability of MR effect.
基金financially supported by the National Key Basic Research Program of China(2012CB821505)the Natural Science Foundation of Shandong Province(No.JQ201016)
文摘According to the vulcanization kinetic equation of natural rubber （NR） established in the isothermal situation, the numerical computation expression of the degree of cure under non-isothermal condition is constructed by means of incremental method. The description of non-isothermal in-mold vulcanization process is carried out by the finite element method. The mold-opening time, the rubber and mold temperatures, the degree of rubber cure and its distribution characteristics are numerically analyzed, by changing the key formulas and parameters in the process including the temperature of curing medium, the concentration of 2-mercaptobenzothiazole, the heat transfer manner of mold side, and the convective heat transfer coefficient of heating boundary. The quantitative results will help engineers to design proper formulas and optimize processing conditions.
基金financially supported by the National Natural Science Foundation of China(Nos.51003031 and 51303026)Science Foundation for Universities and Institutions of Dongguan City(No.2012108102008)the Research Fund for the Doctoral Program of Dongguan University of Technology(No.ZJ121002)
文摘A novel TU derivative, N-phenyl-N＇-（γ-triethoxysilane）-propyl thiourea （STU）, is prepared and its binary accelerator system is investigated in detail. Compared to the control references, the optimum curing time of NR compounds with STU is the shortest, indicating a more nucleophilic reaction occurs. The Py-GC/MS results present that the phenyl iso- thiocyanate fragment still remains in the NPUSTU compounds with or without extracting treatment, but no silane segment can be found in the vulcanizate with extracting treatment. Vibrations of C=S, NH and aromatic ring in FTIR experiments and a new methyne carbon peak, as well as the peaks of phenyl group of STU, in the solid state 13C-NMR experiments are found in the NR/STU vulcanizate with extracting treatment. Moreover, the crosslinking density of vulcanizates with STU evolves to lower level, indicating the sulfur atom of STU does not contribute to the sulfur crosslinking. Therefore, a new vulcanization kinetic mechanism of STU is propounded that the thiourea groups can graft to the rubber main chains as pendant groups by chemical bonds during the vulcanization process, which is in accordance with the experimental observations quite well.
基金financially supported by the National Natural Science Foundation of China(No.51203096)the Ph.D.Programs Foundation of Ministry of Education of China(No.20100181120020)Sichuan University
文摘This paper presents the influence of graphene on the vulcanization kinetics of styrene butadiene rubber （SBR） with dicumyl peroxide. A curemeter and a differential scanning calorimeter were used to investigate the cure kinetics, from which the kinetic parameters and apparent activation energy were obtained. It turns out that with increasing graphene loading, the induction period of the vulcanization process of SBR is remarkably reduced at low graphene loading and then levels off; on the other hand, the optimum cure time shows a monotonous decrease. As a result, the vulcanization rate is suppressed at first and then accelerated, and the corresponding activation energy increases slightly at first and then decreases. Upon adding graphene, the crosslinking density of the nanocomposites increases, because graphene takes part in the vulcanization process.
文摘Allyl terminated polyether was used to improve the hydrophilicity of addition-cured room temperature vulcanization silicone rubber. With the increasing of the polyether, both the hydrophilicity and water absorbed of the vulcanizates were increased. The mechanical properties were also improved by adding the polyether. The result showed that 1.5wt% of the polyether provided the silicone rubber with proper hydrophilicity.
基金supported in part by the National Natural Science Foundation of China(No.52176040)Shandong Natural Science Foundation(No.ZR2021ME161)the Science and Technology SMES Innovation Ability Improvement of Shandong Province(No.2023TSGC0290)。
文摘In order to reduce the temperature difference caused by condensed water in vulcanized tire capsules,the flow field and temperature field inside vulcanized tire capsules were numerically simulated by setting three different intake angles based onvolume of fluid(VOF)multiphase flow model.When the intake air is blown to the upper and lower tire sides of the vulcanized capsule at 18°from the horizontal direction,the distribution of condensed water at the bottom of the capsule changes obviously due to the effect of vorticity flow,and the distribution along the wall is more uniform.When the inlet air is blown down the tire side,the condensate is most evenly distributed along the wall,and the maximum temperature difference drops to 9.5℃.The results show that changing the distribution of condensed water by adjusting the proper intake angle can effectively reduce the temperature difference of condensed water in vulcanized capsules.
基金Supported by Henan Province-Chinese Academy of Sciences Cooperation project(No.092106000021)the Scientific and Technological Brainstorm project of Erqi District,Zhengzhou City(No.20103315)
文摘In this paper,the natural rubber is chosen as the main constituents for the transition layer of all-steel load radial tyre,which is pre-vulcanized by 500-keV E-beam irradiation of up to 60 kGy.The results show that the green strength of transitional layer increases with the dose,reaching four times as much as the control(without irradiation) at 60 kGy.The final mechanical properties do not differ significantly from those of the control except that the aging and fatigue performance increased.However,thickness of the natural rubber transitional layer for an average single tyre can be reduced by 1 mm(or 1.5 kg) without obvious adverse effect on tyre performance.
