An essential technology of carbon capture, utilization and storage-enhanced oil recovery (CCUS-EOR) for tight oil reservoirs is CO_(2) huff-puff followed by associated produced gas reinjection. In this paper, the effe...An essential technology of carbon capture, utilization and storage-enhanced oil recovery (CCUS-EOR) for tight oil reservoirs is CO_(2) huff-puff followed by associated produced gas reinjection. In this paper, the effects of multi-component gas on the properties and components of tight oil are studied. First, the core displacement experiments using the CH_(4)/CO_(2) multi-component gas are conducted to determine the oil displacement efficiency under different CO_(2) and CH_(4) ratios. Then, a viscometer and a liquid density balance are used to investigate the change characteristics of oil viscosity and density after multi-component gas displacement with different CO_(2) and CH_(4) ratios. In addition, a laboratory scale numerical model is established to validate the experimental results. Finally, a composition model of multi-stage fractured horizontal well in tight oil reservoir considering nano-confinement effects is established to investigate the effects of multi-component gas on the components of produced dead oil and formation crude oil. The experimental results show that the oil displacement efficiency of multi-component gas displacement is greater than that of single-component gas displacement. The CH_(4) decreases the viscosity and density of light oil, while CO_(2) decreases the viscosity but increases the density. And the numerical simulation results show that CO_(2) extracts more heavy components from the liquid phase into the vapor phase, while CH_(4) extracts more light components from the liquid phase into the vapor phase during cyclic gas injection. The multi-component gas can extract both the light components and the heavy components from oil, and the balanced production of each component can be achieved by using multi-component gas huff-puff.展开更多
Geological storage and utilization of CO_(2)involve complex interactions among Thermo-hydromechanical-chemical(THMC)coupling processes,which significantly affect storage integrity and efficiency.To address the challen...Geological storage and utilization of CO_(2)involve complex interactions among Thermo-hydromechanical-chemical(THMC)coupling processes,which significantly affect storage integrity and efficiency.To address the challenges in accurately simulating these coupled phenomena,this paper systematically reviews recent advances in the mathematical modeling and numerical solution of THMC coupling in CO_(2)geological storage.The study focuses on the derivation and structure of governing and constitutive equations,the classification and comparative performance of fully coupled,iteratively coupled,and explicitly coupled solution methods,and the modeling of dynamic changes in porosity,permeability,and fracture evolution induced by multi-field interactions.Furthermore,the paper evaluates the capabilities,application scenarios,and limitations of major simulation platforms,including TOUGH,CMG-GEM,and COMSOL.By establishing a comparative framework integrating model formulations and solver strategies,this work clarifies the strengths and gaps of current approaches and contributes to the development of robust,scalable,and mechanism-oriented numerical models for long-term prediction of CO_(2)behavior in geological formations.展开更多
CO_(2)-responsive gels,which swell upon contact with CO_(2),are widely used for profile control to plug high-permeability gas flow channels in carbon capture,utilization,and storage(CCUS)applications in oil reser-voir...CO_(2)-responsive gels,which swell upon contact with CO_(2),are widely used for profile control to plug high-permeability gas flow channels in carbon capture,utilization,and storage(CCUS)applications in oil reser-voirs.However,the use of these gels in high-temperature CCUS applications is limited due to their rever-sible swelling behavior at elevated temperatures.In this study,a novel dispersed particle gel(DPG)suspension is developed for high-temperature profile control in CCUS applications.First,we synthesize a double-network hydrogel consisting of a crosslinked polyacrylamide(PAAm)network and a crosslinked sodium alginate(SA)network.The hydrogel is then sheared in water to form a pre-prepared DPG suspen-sion.To enhance its performance,the gel particles are modified by introducing potassium methylsilan-etriolate(PMS)upon CO_(2) exposure.Comparing the particle size distributions of the modified and pre-prepared DPG suspension reveals a significant swelling of gel particles,over twice their original size.Moreover,subjecting the new DPG suspension to a 100℃ environment for 24 h demonstrates that its gel particle sizes do not decrease,confirming irreversible swelling,which is a significant advantage over the traditional CO_(2)-responsive gels.Thermogravimetric analysis further indicates improved thermal sta-bility compared to the pre-prepared DPG particles.Core flooding experiments show that the new DPG suspension achieves a high plugging efficiency of 95.3%in plugging an ultra-high permeability sandpack,whereas the pre-prepared DPG suspension achieves only 82.8%.With its high swelling ratio,irreversible swelling at high temperatures,enhanced thermal stability,and superior plugging performance,the newly developed DPG suspension in this work presents a highly promising solution for profile control in high-temperature CCUS applications.展开更多
Carbon capture,utilization,and storage(CCUS)represents a critical technological pathway for global car-bon emission reduction.CCUS-enhanced oil recovery(EOR)technology is the most feasible CCUS technol-ogy demonstrati...Carbon capture,utilization,and storage(CCUS)represents a critical technological pathway for global car-bon emission reduction.CCUS-enhanced oil recovery(EOR)technology is the most feasible CCUS technol-ogy demonstrating dual benefits of enhanced energy production and carbon reduction.This study comprehensively described the key influencing factors governing CO_(2)-EOR and geological storage and systematically analyzed reservoir properties,fluid characteristics,and operational parameters.The mech-anisms of these parameters on EOR versus CO_(2) storage performance were investigated throughout CCUS-EOR processes.This paper proposes a coupled two-stage CCUS-EOR process:CO_(2)-EOR storage stage and long-term CO_(2) storage stage after the CO_(2) injection phase is completed.In each stage,the main control factors impacting the CO_(2)-EOR and storage stages are screened and coupled with rigorous technical anal-ysis.The key factors here are reservoir properties,fluid characteristics,and operational parameter.A novel CCUS-EOR synergistic method was proposed to optimize the lifecycle performance of dual objective of EOR and storage.Furthermore,based on multi-objective optimization,considering the lifecycle,a multi-scale techno-economic evaluation method was proposed to fully assess the CCUS-EOR project per-formance.Finally,a set of recommendations for advancing CCUS-EOR technologies by deploying multi-factor/multi-field coupling methodologies,novel green intelligent injection materials,and artificial intel-ligence/machine learning technologies were visited.展开更多
In the context of carbon capture,utilization,and storage,the high-value utilization of carbon storage presents a significant challenge.To address this challenge,this study employed the bipolar membrane electrodialysis...In the context of carbon capture,utilization,and storage,the high-value utilization of carbon storage presents a significant challenge.To address this challenge,this study employed the bipolar membrane electrodialysis integrated with carbon utilization technology to prepare Na_(2)CO_(3)products using simulated seawater concentrate,achieving simultaneous saline wastewater utilization,carbon storage and high-value production of Na_(2)CO_(3).The effects of various factors,including concentration of simulated seawater concentrate,current density,CO_(2)aeration rate,and circulating flow rate of alkali chamber,on the quality of Na_(2)CO_(3)product,carbon sequestration rate,and energy consumption were investigated.Under the optimal condition,the CO_(3)^(2-)concentration in the alkaline chamber reached a maximum of 0.817 mol/L with 98 mol%purity.The resulting carbon fixation rate was 70.50%,with energy consumption for carbon sequestration and product production of 5.7 k Whr/m^(3)CO_(2)and1237.8 k Whr/ton Na_(2)CO_(3),respectively.This coupling design provides a triple-win outcome promoting waste reduction and efficient utilization of resources.展开更多
The promotion of deep decarbonization in the cement industry is crucial for mitigating global climate change,a key component of which is carbon capture,utilization,and storage(CCUS)technology.Despite its importance,th...The promotion of deep decarbonization in the cement industry is crucial for mitigating global climate change,a key component of which is carbon capture,utilization,and storage(CCUS)technology.Despite its importance,there is a lack of empirical assessments of early opportunities for CCUS implementation in the cement sector.In this study,a comprehensive onshore and offshore source–sink matching optimization assessment framework for CCUS retrofitting in the cement industry,called the SSM-Cement framework,is proposed.The framework comprises four main modules:the cement plant suitability screening module,the storage site assessment module,the source–sink matching optimization model module,and the economic assessment module.By applying this framework to China,919 candidates are initially screened from 1132 existing cement plants.Further,603 CCUS-ready cement plants are identified,and are found to achieve a cumulative emission reduction of 18.5 Gt CO_(2) from 2030 to 2060 by meeting the CCUS feasibility conditions for constructing both onshore and offshore CO_(2) transportation routes.The levelized cost of cement(LCOC)is found to range from 30 to 96(mean 73)USD·(t cement)^(-1),while the levelized carbon avoidance cost(LCAC)ranges from^(-5) to 140(mean 88)USD·(t CO_(2))^(-1).The northeastern and northwestern regions of China are considered priority areas for CCUS implementation,with the LCAC concentrated in the range of 35 to 70 USD·(t CO_(2))^(-1).In addition to onshore storage of 15.8 Gt CO_(2) from 2030 to 2060,offshore storage would contribute 2.7 Gt of decarbonization for coastal cement plants,with comparable LCACs around 90 USD·(t CO_(2))^(-1).展开更多
CO_(2)emission mitigation is one of the most critical research frontiers.As a promising option of carbon capture,utilization and storage(CCUS),CO_(2)storage with enhanced gas recovery(CSEGR)can reduce CO_(2)emission b...CO_(2)emission mitigation is one of the most critical research frontiers.As a promising option of carbon capture,utilization and storage(CCUS),CO_(2)storage with enhanced gas recovery(CSEGR)can reduce CO_(2)emission by sequestrating it into gas reservoirs and simultaneously enhance natural gas production.Over the past decades,the displacement behaviour of CO_(2)—natural gas has been extensively studied and demonstrated to play a key role on both CO_(2)geologic storage and gas recovery performance.This work thoroughly and critically reviews the experimental and numerical simulation studies of CO_(2)displacing natural gas,along with both CSEGR research and demonstration projects at various scales.The physical property difference between CO_(2)and natural gas,especially density and viscosity,lays the foundation of CSEGR.Previous experiments on displacement behaviour and dispersion characteristics of CO_(2)/natural gas revealed the fundamental mixing characteristics in porous media,which is one key factor of gas recovery efficiency and warrants further study.Preliminary numerical simulations demonstrated that it is technically and economically feasible to apply CSEGR in depleted gas reservoirs.However,CO_(2)preferential flow pathways are easy to form(due to reservoir heterogeneity)and thus adversely compromise CSEGR performance.This preferential flow can be slowed down by connate or injected water.Additionally,the optimization of CO_(2)injection strategies is essential for improving gas recovery and CO_(2)storage,which needs further study.The successful K12—B pilot project provides insightful field-scale knowledge and experience,which paves a good foundation for commercial application.More experiments,simulations,research and demonstration projects are needed to facilitate the maturation of the CSEGR technology.展开更多
This work systematically reviews the complex mechanisms of CO_(2)-water-rock interactions,microscopic simulations of reactive transport(dissolution,precipitation and precipitate migration)in porous media,and microscop...This work systematically reviews the complex mechanisms of CO_(2)-water-rock interactions,microscopic simulations of reactive transport(dissolution,precipitation and precipitate migration)in porous media,and microscopic simulations of CO_(2)-water-rock system.The work points out the key issues in current research and provides suggestions for future research.After injection of CO_(2) into underground reservoirs,not only conventional pressure-driven flow and mass transfer processes occur,but also special physicochemical phenomena like dissolution,precipitation,and precipitate migration.The coupling of these processes causes complex changes in permeability and porosity parameters of the porous media.Pore-scale microscopic flow simulations can provide detailed information within the three-dimensional pore and throat space and explicitly observe changes in the fluid-solid interfaces of porous media during reactions.At present,the research has limitations in the decoupling of complex mechanisms,characterization of differential multi-mineral reactions,precipitation generation mechanisms and characterization(crystal nucleation and mineral detachment),simulation methods for precipitation-fluid interaction,and coupling mechanisms of multiple physicochemical processes.In future studies,it is essential to innovate experimental methods to decouple“dissolution-precipitation-precipitate migration”processes,improve the accuracy of experimental testing of minerals geochemical reaction-related parameters,build reliable characterization of various precipitation types,establish precipitation-fluid interaction simulation methods,coordinate the boundary conditions of different physicochemical processes,and,finally,achieve coupled flow simulation of“dissolution-precipitation-precipitate migration”within CO_(2)-water-rock systems.展开更多
The risk of gas leakage due to geological flaws in offshore carbon capture, utilization, and storage, as well as leakage from underwater oil or gas pipelines, highlights the need for underwater gas leakage monitoring ...The risk of gas leakage due to geological flaws in offshore carbon capture, utilization, and storage, as well as leakage from underwater oil or gas pipelines, highlights the need for underwater gas leakage monitoring technology. Remotely operated vehicles(ROVs) and autonomous underwater vehicles(AUVs) are equipped with high-resolution imaging sonar systems that have broad application potential in underwater gas and target detection tasks. However, some bubble clusters are relatively weak scatterers, so detecting and distinguishing them against the seabed reverberation in forward-looking sonar images are challenging. This study uses the dual-tree complex wavelet transform to extract the image features of multibeam forward-looking sonar. Underwater gas leakages with different flows are classified by combining deep learning theory. A pool experiment is designed to simulate gas leakage, where sonar images are obtained for further processing. Results demonstrate that this method can detect and classify underwater gas leakage streams with high classification accuracy. This performance indicates that the method can detect gas leakage from multibeam forward-looking sonar images and has the potential to predict gas leakage flow.展开更多
The potential of microalgae as a biological resource for carbon capture,utilization,and storage(CCUS)has been extensively discussed.Although genetic engineering methods have been employed to improve microalgal phenoty...The potential of microalgae as a biological resource for carbon capture,utilization,and storage(CCUS)has been extensively discussed.Although genetic engineering methods have been employed to improve microalgal phenotypes,they often face challenges related to public concerns regarding genetically modified organisms.By contrast,adaptive laboratory evolution(ALE)and microbiome optimization have emerged as promising non-genetic modification strategies,with notable success in bacterial models.In microalgae,ALE has been employed to improve resilience against varying environmental and stress factors and increase carbon capture efficiency,and for the production of valuable bioproducts through gradual accumulation of beneficial mutations following manual or automated selection.Furthermore,advancements in the understanding of microbial symbiotic relationships in the phycosphere have facilitated microbiome optimization in microalgal cultivation systems,significantly improving their functionality and productivity.In this study,we provide a comprehensive overview of the latest advancements in ALE and microbiome optimization of microalgae for CCUS across different carbon emission scenarios,including flue gas,biogas,wastewater,and landfill leachate.We further discuss the current challenges and future directions for the integration of ALE with microbiome optimization,focusing on the potential synergies of these methodologies.Overall,ALE and microbiome optimization are promising approaches to direct microalgae for environmental and industrial CCUS applications,thereby reducing global carbon emissions and addressing climate change challenges.展开更多
The decarbonization of the built environment is a pressing issue to achieve CO_(2)reduction targets in the concrete industry.Carbon mineralization of construction and demolition waste(C&DW)is an attractive pathway...The decarbonization of the built environment is a pressing issue to achieve CO_(2)reduction targets in the concrete industry.Carbon mineralization of construction and demolition waste(C&DW)is an attractive pathway to capture of CO_(2)as stable carbonates which can be re-utilized and upcycled in a circularized fashion through the creation of new building blocks.Material recovery from the C&DW is often performed in hydrometallurgical leaching using acidic media;however,this process is often hindered by solubility issues and passivation.To ensure high recoveries of these elements,ligands can be used to enhance dissolution.Carboxylic acids are used in conventional hydrometallurgical mineral processing,such as leaching,floatation,and solvent extraction,and are desired due to their affordability and stability.In this study,we explore the dissolution of waste cement pastes in acidic conditions under the presence of four carboxylic acid ligands:formate,acetate,glutamate,and citrate.The leaching kinetics are categorized and the pseudo-rate constants are established,demonstrating the advantages of these agents to enhance reaction rates in the general order of citrate⋙formate>acetate>glutamate>control.The characterization of the post-extraction reactor residue(PERR)revealed a significant increase in Si-content.Finally,the leachate was carbonated to produce calcium carbonate,which was characterized for its use based on morphology and size.Glutamate demonstrated distinct advantages compared to other ligands,with a dual function of not only improving leachability of cement but promoting and stabilizing vaterite during crystallization.Overall,this study motivates the use of sustainable ligands to enhance material recovery during the dissolution of alkaline wastes for carbon mineralization.展开更多
Carbon neutrality(or climate neutrality)has been a global consensus,and international experience exchange is essential.Given the differences in the degree of social development,resource endowment and technological lev...Carbon neutrality(or climate neutrality)has been a global consensus,and international experience exchange is essential.Given the differences in the degree of social development,resource endowment and technological level,each country should build a carbon-neutral plan based on its national conditions.Compared with other major developed countries(e.g.,Germany,the United States and Japan),China's carbon neutrality has much bigger challenges,including a heavy and time-pressured carbon reduction task and the current energy structure that is over-dependent on fossil fuels.Here we provide a comprehensive review of the status and prospects of the key technologies for low-carbon,near-zero carbon,and negative carbon emissions.Technological innovations associated with coal,oil-gas and hydrogen industries and their future potential in reducing carbon emissions are particularly explained and assessed.Based on integrated analysis of international experience from the world's major developed countries,in-depth knowledge of the current and future technologies,and China's energy and ecological resources potential,five lessons for the implementation of China's carbon neutrality are proposed:(1)transformation of energy production pattern from a coal-dominated pattern to a diversified renewable energy pattern;(2)renewable power-to-X and large-scale underground energy storage;(3)integration of green hydrogen production,storage,transport and utilization;(4)construction of clean energy systems based on smart sector coupling(ENSYSCO);(5)improvement of ecosystem carbon sinks both in nationwide forest land and potential desert in Northwest China.This paper provides an international perspective for a better understanding of the challenges and opportunities of carbon neutrality in China,and can serve as a theoretical foundation for medium-long term carbon neutral policy formulation.展开更多
The threshold values of CO_(2) gas stripped off membranous residual oil from the pore walls are not clear under different temperatures, pressures and wettability conditions. The extent to which temperature, pressure a...The threshold values of CO_(2) gas stripped off membranous residual oil from the pore walls are not clear under different temperatures, pressures and wettability conditions. The extent to which temperature, pressure and wettability influence CO_(2) flooding for enhancing the recovery of residual oil in membranous formations also remains uncertain. Therefore, further quantitative characterization is entailed. In this study, the molecular dynamics method was employed to explore CO_(2) flooding under different temperatures, pressures and wettability conditions, aiming to enhance the production of membranous residual oil. The results reveal that the interaction energy between CO_(2), decane molecules and pore walls exhibits a decrease with increasing temperature and an increase with increasing pressure, respectively, in distinct wettability scenarios. When the temperature was at or below 363 K and the pressure was not lower than 40 MPa, CO_(2) gas could detach the membranous residual oil from the pore walls in the water-wet systems. When the temperature was equal to 363 K and the pressure remained under 40 MPa, or the temperature surpassed 363 K, CO_(2) gas failed to detach the membranous residual oil from the pore walls in the water-wet systems. For the mixed-wet and oil-wet systems, CO_(2) molecules could not detach the membranous residual oil from the pore walls. The hierarchy of influence regarding temperature, pressure and wettability on the competitive adsorption capacity of CO_(2) and decane molecules on the pore walls emerged as follows: wettability > temperature > pressure. The findings of this study offer valuable insights into the application of CO_(2) gas flooding for the exploitation of membranous residual oil on pore walls.展开更多
Coal is the dominant primary energy source in China and the major source of greenhouse gases and air pollutants. To facilitate the use of coal in an environmentally satisfactory and economically viable way, clean coal...Coal is the dominant primary energy source in China and the major source of greenhouse gases and air pollutants. To facilitate the use of coal in an environmentally satisfactory and economically viable way, clean coal technologies （CCTs） are necessary. This paper presents a review of recent research and development of four kinds of CCTs： coal power generation; coal conversion; pollution control; and carbon capture, utilization, and storage. It also outlines future perspectives on directions for technology re search and development （R＆D）. This review shows that China has made remarkable progress in the R＆D of CCTs, and that a number of CCTs have now entered into the commercialization stage.展开更多
Marine carbon sequestration is an important component of carbon dioxide capture, utilization and storage(CCUS) technology. It is crucial for achieving carbon peaking and carbon neutralization in China. However, CO_(2)...Marine carbon sequestration is an important component of carbon dioxide capture, utilization and storage(CCUS) technology. It is crucial for achieving carbon peaking and carbon neutralization in China. However, CO_(2) leakage may lead to seabed geological disasters and threaten the safety of marine engineering. Therefore, it is of great significance to study the safety monitoring technology of marine carbon sequestration.Zhanjiang is industrially developed and rich in carbon sources. Owing to the good physical properties and reservoirs and trap characteristics,Zhanjiang has huge storage potential. This paper explores the disaster mechanism associated with CO_(2) leakage in marine carbon sequestration areas. Based on the analysis of the development of Zhanjiang industry and relevant domestic monitoring technologies, several suggestions for safety monitoring of marine carbon sequestration are proposed: application of offshore aquaculture platforms, expansion and application of ocean observation networks, carbon sequestration safety monitoring and sensing system. Intended to build a comprehensive and multi-level safety monitoring system for marine carbon sequestration, the outcome of this study provides assistance for the development of marine carbon sequestration in China's offshore areas.展开更多
Thecoal-to-liquidcoupledwithcarbon capture,utilization,and storage technology has the potential to reduce CO_(2)emissions,but its carbon footprint and cost assessment are still insufficient.In this paper,coal mining t...Thecoal-to-liquidcoupledwithcarbon capture,utilization,and storage technology has the potential to reduce CO_(2)emissions,but its carbon footprint and cost assessment are still insufficient.In this paper,coal mining to oil production is taken as a life cycle to evaluate the carbon footprint and levelized costs of direct-coal-toliquid and indirect-coal-to-liquid coupled with the carbon capture utilization and storage technology under three scenarios:non capture,process capture,process and public capture throughout the life cycle.The results show that,first,the coupling carbon capture utilization and storage technology can reduce CO_(2)footprint by 28%-57%from 5.91 t CO_(2)/t:oil of direct-coal-to-liquid and 24%-49%from 7.10 t CO_(2)/t:oil of indirect-coal-to-liquid.Next,the levelized cost of direct-coal-to-liquid is 648-1027$/t of oil,whereas that of indirect-coal-to-liquid is 653-1065$/t of oil.When coupled with the carbon capture utilization and storage technology,the levelized cost of direct-coalto-liquid is 285-1364$/t of oil,compared to 1101-9793/t of oil for indirect-coal-to-liquid.Finally,sensitivity analysis shows that CO_(2)transportation distance has the greatest impact on carbon footprint,while coal price and initial investment cost significantly affect the levelized cost ofcoal-to-liquid.展开更多
Geothermal energy is a kind of renewable,sustainable and clean energy resource.Geothermal energy is abundant in carbonate reservoirs.However,low matrix permeability limits its exploitation.The super-critical carbon di...Geothermal energy is a kind of renewable,sustainable and clean energy resource.Geothermal energy is abundant in carbonate reservoirs.However,low matrix permeability limits its exploitation.The super-critical carbon dioxide(SC-CO_(2))jet fracturing is expected to efficiently stimulate the carbonate geothermal reservoirs and achieve the storage of CO_(2) simultaneously.In this paper,we established a transient seepage and fluid-thermo-mechanical coupled model to analyze the impact performance of sc-CO_(2) jet fracturing.The mesh-based parallel code coupling interface was employed to couple the fluid and solid domains by exchanging the data through the mesh interface.The physical properties change of sC-CO_(2) with temperature were considered in the numerical model.Results showed that SC-CO_(2) jet frac-turing is superior to water-jet fracturing with respect to jetting velocity,particle trajectory and pene-trability.Besides,stress distribution on the carbonate rock showed that the tensile and shear failure would more easily occur by SC-CO_(2) jet than that by water jet.Moreover,pressure and temperature control the jet field and seepage field of sC-CO_(2) simultaneously.Increasing the jet temperature can effectively enhance the impingement effect and seepage process by decreasing the viscosity and density of SC-CO_(2).The key findings are expected to provide a theoretical basis and design reference for applying SC-CO_(2) jet fracturing in carbonate geothermal reservoirs.展开更多
Carbon capture,utilization and storage(CCUS)technologies play an essential role in achieving Net Zero Emissions targets.Considering the lack of timely reviews on the recent advancements in promising CCUS technologies,...Carbon capture,utilization and storage(CCUS)technologies play an essential role in achieving Net Zero Emissions targets.Considering the lack of timely reviews on the recent advancements in promising CCUS technologies,it is crucial to provide a prompt review of the CCUS advances to understand the current research gaps pertained to its industrial application.To that end,this review first summarized the developmental history of CCUS technologies and the current large-scale demonstrations.Then,based on a visually bibliometric analysis,the carbon capture remains a hotspot in the CCUS development.Noting that the materials applied in the carbon capture process determines its performance.As a result,the state-of-the-art carbon capture materials and emerging capture technologies were comprehensively summarized and discussed.Gaps between state-of-art carbon capture process and its ideal counterpart are analyzed,and insights into the research needs such as material design,process optimization,environmental impact,and technical and economic assessments are provided.展开更多
Facing the global warming trend,humanity has been paying more and more attention to the Carbon Capture,Utilization and Storage.Large amounts of CO_(2)is emitted with burning fossil fuel as well as by some special indu...Facing the global warming trend,humanity has been paying more and more attention to the Carbon Capture,Utilization and Storage.Large amounts of CO_(2)is emitted with burning fossil fuel as well as by some special industrial processes like the decomposition of calcium carbonate in a cement plant.The cement industry contributes about 7%of the total worldwide CO_(2)emissions and the CO_(2)concentration of flue gas of the cement kiln tail even exceeds 30%.Ionic liquid is considered to be an effective and potential material to capture CO_(2).In order to investigate the performance of ionic liquids for capturing CO_(2)from flue gas of the cement kiln tail,an experiment system was established and an ionic liquid,[APMIm][NTf_(2)](1-aminopropyl-3-imidazolium bis(trifluoromethylsulfonyl)imine),was tested using pure CO_(2)and simulated gas.The results showed that both physical and chemical absorption play roles while physical absorption dominates in the absorption process.Both the absorption capacity and rate decrease with raising the operating temperature.In the experiment with pure CO_(2),the absorption capacity is 0.296molCO_(2)⋅molIL−1 at 30℃ and 0.067molCO_(2)⋅molIL−1 at 70℃.Meanwhile,the ionic liquid can be regenerated for recycling without obvious changes of the absorption capacity.When the ionic liquid is used for flue gas of the cement kiln tail rather than pure CO_(2),a sharp decrease of the absorption capacity and rate was observed obviously.The absorption capacity at 30℃ dropped even to 0.038molCO_(2)⋅mol_(IL)^(−1),12.8%of that for pure CO_(2).Additionally,a natural desorption of CO_(2)from the ionic liquid was observed and affected the experimental results of the absorption capacity and the absorption-desorption rate to some extent.展开更多
基金supported by the National Natural Science Foundation of China(No.52174038 and No.52004307)China Petroleum Science and Technology Project-major project-Research on tight oil-shale oil reservoir engineering methods and key technologies in Ordos Basin(ZLZX2020-02-04)Science Foundation of China University of Petroleum,Beijing(No.2462018YJRC015).
文摘An essential technology of carbon capture, utilization and storage-enhanced oil recovery (CCUS-EOR) for tight oil reservoirs is CO_(2) huff-puff followed by associated produced gas reinjection. In this paper, the effects of multi-component gas on the properties and components of tight oil are studied. First, the core displacement experiments using the CH_(4)/CO_(2) multi-component gas are conducted to determine the oil displacement efficiency under different CO_(2) and CH_(4) ratios. Then, a viscometer and a liquid density balance are used to investigate the change characteristics of oil viscosity and density after multi-component gas displacement with different CO_(2) and CH_(4) ratios. In addition, a laboratory scale numerical model is established to validate the experimental results. Finally, a composition model of multi-stage fractured horizontal well in tight oil reservoir considering nano-confinement effects is established to investigate the effects of multi-component gas on the components of produced dead oil and formation crude oil. The experimental results show that the oil displacement efficiency of multi-component gas displacement is greater than that of single-component gas displacement. The CH_(4) decreases the viscosity and density of light oil, while CO_(2) decreases the viscosity but increases the density. And the numerical simulation results show that CO_(2) extracts more heavy components from the liquid phase into the vapor phase, while CH_(4) extracts more light components from the liquid phase into the vapor phase during cyclic gas injection. The multi-component gas can extract both the light components and the heavy components from oil, and the balanced production of each component can be achieved by using multi-component gas huff-puff.
基金supported by the China Postdoctoral Science Foundation(No.2024M752803)the National Natural Science Foundation of China(No.52179112)the Open Fund of National Key Laboratory of Oil and Gas Reservoir Geology and Exploitation(Southwest Petroleum University)(No.PLN2023-02)。
文摘Geological storage and utilization of CO_(2)involve complex interactions among Thermo-hydromechanical-chemical(THMC)coupling processes,which significantly affect storage integrity and efficiency.To address the challenges in accurately simulating these coupled phenomena,this paper systematically reviews recent advances in the mathematical modeling and numerical solution of THMC coupling in CO_(2)geological storage.The study focuses on the derivation and structure of governing and constitutive equations,the classification and comparative performance of fully coupled,iteratively coupled,and explicitly coupled solution methods,and the modeling of dynamic changes in porosity,permeability,and fracture evolution induced by multi-field interactions.Furthermore,the paper evaluates the capabilities,application scenarios,and limitations of major simulation platforms,including TOUGH,CMG-GEM,and COMSOL.By establishing a comparative framework integrating model formulations and solver strategies,this work clarifies the strengths and gaps of current approaches and contributes to the development of robust,scalable,and mechanism-oriented numerical models for long-term prediction of CO_(2)behavior in geological formations.
基金Lin Du acknowledges the financial support provided by China Scholarship Council(CSC)via a Ph.D.Scholarship(202008510128)supported by Core Technology Project of China National Petroleum Corporation(CNPC)"Research on Thermal Miscible Flooding Technology"(2023ZG18)。
文摘CO_(2)-responsive gels,which swell upon contact with CO_(2),are widely used for profile control to plug high-permeability gas flow channels in carbon capture,utilization,and storage(CCUS)applications in oil reser-voirs.However,the use of these gels in high-temperature CCUS applications is limited due to their rever-sible swelling behavior at elevated temperatures.In this study,a novel dispersed particle gel(DPG)suspension is developed for high-temperature profile control in CCUS applications.First,we synthesize a double-network hydrogel consisting of a crosslinked polyacrylamide(PAAm)network and a crosslinked sodium alginate(SA)network.The hydrogel is then sheared in water to form a pre-prepared DPG suspen-sion.To enhance its performance,the gel particles are modified by introducing potassium methylsilan-etriolate(PMS)upon CO_(2) exposure.Comparing the particle size distributions of the modified and pre-prepared DPG suspension reveals a significant swelling of gel particles,over twice their original size.Moreover,subjecting the new DPG suspension to a 100℃ environment for 24 h demonstrates that its gel particle sizes do not decrease,confirming irreversible swelling,which is a significant advantage over the traditional CO_(2)-responsive gels.Thermogravimetric analysis further indicates improved thermal sta-bility compared to the pre-prepared DPG particles.Core flooding experiments show that the new DPG suspension achieves a high plugging efficiency of 95.3%in plugging an ultra-high permeability sandpack,whereas the pre-prepared DPG suspension achieves only 82.8%.With its high swelling ratio,irreversible swelling at high temperatures,enhanced thermal stability,and superior plugging performance,the newly developed DPG suspension in this work presents a highly promising solution for profile control in high-temperature CCUS applications.
基金the financial support from the National Key Research and Development Program of China(2022YFE0206700)the Science Foundation of China University of Petroleum,Beijing(2462021YJRC012).
文摘Carbon capture,utilization,and storage(CCUS)represents a critical technological pathway for global car-bon emission reduction.CCUS-enhanced oil recovery(EOR)technology is the most feasible CCUS technol-ogy demonstrating dual benefits of enhanced energy production and carbon reduction.This study comprehensively described the key influencing factors governing CO_(2)-EOR and geological storage and systematically analyzed reservoir properties,fluid characteristics,and operational parameters.The mech-anisms of these parameters on EOR versus CO_(2) storage performance were investigated throughout CCUS-EOR processes.This paper proposes a coupled two-stage CCUS-EOR process:CO_(2)-EOR storage stage and long-term CO_(2) storage stage after the CO_(2) injection phase is completed.In each stage,the main control factors impacting the CO_(2)-EOR and storage stages are screened and coupled with rigorous technical anal-ysis.The key factors here are reservoir properties,fluid characteristics,and operational parameter.A novel CCUS-EOR synergistic method was proposed to optimize the lifecycle performance of dual objective of EOR and storage.Furthermore,based on multi-objective optimization,considering the lifecycle,a multi-scale techno-economic evaluation method was proposed to fully assess the CCUS-EOR project per-formance.Finally,a set of recommendations for advancing CCUS-EOR technologies by deploying multi-factor/multi-field coupling methodologies,novel green intelligent injection materials,and artificial intel-ligence/machine learning technologies were visited.
基金supported by the Central Guidance on Local Science and Technology Development Fund of Hebei Province(No.226Z3102G)the Fundamental Research Funds of Hebei University of Technology(No.JBKYTD2001)the Science Research Project of Hebei Education Department(No.QN2022089)。
文摘In the context of carbon capture,utilization,and storage,the high-value utilization of carbon storage presents a significant challenge.To address this challenge,this study employed the bipolar membrane electrodialysis integrated with carbon utilization technology to prepare Na_(2)CO_(3)products using simulated seawater concentrate,achieving simultaneous saline wastewater utilization,carbon storage and high-value production of Na_(2)CO_(3).The effects of various factors,including concentration of simulated seawater concentrate,current density,CO_(2)aeration rate,and circulating flow rate of alkali chamber,on the quality of Na_(2)CO_(3)product,carbon sequestration rate,and energy consumption were investigated.Under the optimal condition,the CO_(3)^(2-)concentration in the alkaline chamber reached a maximum of 0.817 mol/L with 98 mol%purity.The resulting carbon fixation rate was 70.50%,with energy consumption for carbon sequestration and product production of 5.7 k Whr/m^(3)CO_(2)and1237.8 k Whr/ton Na_(2)CO_(3),respectively.This coupling design provides a triple-win outcome promoting waste reduction and efficient utilization of resources.
基金financial support of National Natural Science Foundation of China(72174196 and 71874193)the Open Fund of State Key Laboratory of Coal Resources and Safe Mining(SKLCRSM21KFA05)National Program for Support of Top-Notch Young Professionals.
文摘The promotion of deep decarbonization in the cement industry is crucial for mitigating global climate change,a key component of which is carbon capture,utilization,and storage(CCUS)technology.Despite its importance,there is a lack of empirical assessments of early opportunities for CCUS implementation in the cement sector.In this study,a comprehensive onshore and offshore source–sink matching optimization assessment framework for CCUS retrofitting in the cement industry,called the SSM-Cement framework,is proposed.The framework comprises four main modules:the cement plant suitability screening module,the storage site assessment module,the source–sink matching optimization model module,and the economic assessment module.By applying this framework to China,919 candidates are initially screened from 1132 existing cement plants.Further,603 CCUS-ready cement plants are identified,and are found to achieve a cumulative emission reduction of 18.5 Gt CO_(2) from 2030 to 2060 by meeting the CCUS feasibility conditions for constructing both onshore and offshore CO_(2) transportation routes.The levelized cost of cement(LCOC)is found to range from 30 to 96(mean 73)USD·(t cement)^(-1),while the levelized carbon avoidance cost(LCAC)ranges from^(-5) to 140(mean 88)USD·(t CO_(2))^(-1).The northeastern and northwestern regions of China are considered priority areas for CCUS implementation,with the LCAC concentrated in the range of 35 to 70 USD·(t CO_(2))^(-1).In addition to onshore storage of 15.8 Gt CO_(2) from 2030 to 2060,offshore storage would contribute 2.7 Gt of decarbonization for coastal cement plants,with comparable LCACs around 90 USD·(t CO_(2))^(-1).
基金financially supported by the National Natural Science Foundation of China(51906256 and 52074337)Fundamental Research Funds for the Central Universities(21CX06033A)
文摘CO_(2)emission mitigation is one of the most critical research frontiers.As a promising option of carbon capture,utilization and storage(CCUS),CO_(2)storage with enhanced gas recovery(CSEGR)can reduce CO_(2)emission by sequestrating it into gas reservoirs and simultaneously enhance natural gas production.Over the past decades,the displacement behaviour of CO_(2)—natural gas has been extensively studied and demonstrated to play a key role on both CO_(2)geologic storage and gas recovery performance.This work thoroughly and critically reviews the experimental and numerical simulation studies of CO_(2)displacing natural gas,along with both CSEGR research and demonstration projects at various scales.The physical property difference between CO_(2)and natural gas,especially density and viscosity,lays the foundation of CSEGR.Previous experiments on displacement behaviour and dispersion characteristics of CO_(2)/natural gas revealed the fundamental mixing characteristics in porous media,which is one key factor of gas recovery efficiency and warrants further study.Preliminary numerical simulations demonstrated that it is technically and economically feasible to apply CSEGR in depleted gas reservoirs.However,CO_(2)preferential flow pathways are easy to form(due to reservoir heterogeneity)and thus adversely compromise CSEGR performance.This preferential flow can be slowed down by connate or injected water.Additionally,the optimization of CO_(2)injection strategies is essential for improving gas recovery and CO_(2)storage,which needs further study.The successful K12—B pilot project provides insightful field-scale knowledge and experience,which paves a good foundation for commercial application.More experiments,simulations,research and demonstration projects are needed to facilitate the maturation of the CSEGR technology.
基金Supported by the National Natural Science Foundation of China(52234003,52222402,52304044).
文摘This work systematically reviews the complex mechanisms of CO_(2)-water-rock interactions,microscopic simulations of reactive transport(dissolution,precipitation and precipitate migration)in porous media,and microscopic simulations of CO_(2)-water-rock system.The work points out the key issues in current research and provides suggestions for future research.After injection of CO_(2) into underground reservoirs,not only conventional pressure-driven flow and mass transfer processes occur,but also special physicochemical phenomena like dissolution,precipitation,and precipitate migration.The coupling of these processes causes complex changes in permeability and porosity parameters of the porous media.Pore-scale microscopic flow simulations can provide detailed information within the three-dimensional pore and throat space and explicitly observe changes in the fluid-solid interfaces of porous media during reactions.At present,the research has limitations in the decoupling of complex mechanisms,characterization of differential multi-mineral reactions,precipitation generation mechanisms and characterization(crystal nucleation and mineral detachment),simulation methods for precipitation-fluid interaction,and coupling mechanisms of multiple physicochemical processes.In future studies,it is essential to innovate experimental methods to decouple“dissolution-precipitation-precipitate migration”processes,improve the accuracy of experimental testing of minerals geochemical reaction-related parameters,build reliable characterization of various precipitation types,establish precipitation-fluid interaction simulation methods,coordinate the boundary conditions of different physicochemical processes,and,finally,achieve coupled flow simulation of“dissolution-precipitation-precipitate migration”within CO_(2)-water-rock systems.
文摘The risk of gas leakage due to geological flaws in offshore carbon capture, utilization, and storage, as well as leakage from underwater oil or gas pipelines, highlights the need for underwater gas leakage monitoring technology. Remotely operated vehicles(ROVs) and autonomous underwater vehicles(AUVs) are equipped with high-resolution imaging sonar systems that have broad application potential in underwater gas and target detection tasks. However, some bubble clusters are relatively weak scatterers, so detecting and distinguishing them against the seabed reverberation in forward-looking sonar images are challenging. This study uses the dual-tree complex wavelet transform to extract the image features of multibeam forward-looking sonar. Underwater gas leakages with different flows are classified by combining deep learning theory. A pool experiment is designed to simulate gas leakage, where sonar images are obtained for further processing. Results demonstrate that this method can detect and classify underwater gas leakage streams with high classification accuracy. This performance indicates that the method can detect gas leakage from multibeam forward-looking sonar images and has the potential to predict gas leakage flow.
基金supported by the James Albrecht Graduate Student Fellowship for Z.He,and J.Wang at the Institute of Marine and Environmental Technology(IMET),the University System of Maryland and the DOE Office of Fossil Energy and Carbon Management(FE-0031914 and FE-0032188).
文摘The potential of microalgae as a biological resource for carbon capture,utilization,and storage(CCUS)has been extensively discussed.Although genetic engineering methods have been employed to improve microalgal phenotypes,they often face challenges related to public concerns regarding genetically modified organisms.By contrast,adaptive laboratory evolution(ALE)and microbiome optimization have emerged as promising non-genetic modification strategies,with notable success in bacterial models.In microalgae,ALE has been employed to improve resilience against varying environmental and stress factors and increase carbon capture efficiency,and for the production of valuable bioproducts through gradual accumulation of beneficial mutations following manual or automated selection.Furthermore,advancements in the understanding of microbial symbiotic relationships in the phycosphere have facilitated microbiome optimization in microalgal cultivation systems,significantly improving their functionality and productivity.In this study,we provide a comprehensive overview of the latest advancements in ALE and microbiome optimization of microalgae for CCUS across different carbon emission scenarios,including flue gas,biogas,wastewater,and landfill leachate.We further discuss the current challenges and future directions for the integration of ALE with microbiome optimization,focusing on the potential synergies of these methodologies.Overall,ALE and microbiome optimization are promising approaches to direct microalgae for environmental and industrial CCUS applications,thereby reducing global carbon emissions and addressing climate change challenges.
基金supported by the New York State Energy Research&Development Authority(NYSERDA,Albany,New York)Agreement Number:0000185059the Lenfest Center for Sustainable Energy(Columbia University,New York,New York).
文摘The decarbonization of the built environment is a pressing issue to achieve CO_(2)reduction targets in the concrete industry.Carbon mineralization of construction and demolition waste(C&DW)is an attractive pathway to capture of CO_(2)as stable carbonates which can be re-utilized and upcycled in a circularized fashion through the creation of new building blocks.Material recovery from the C&DW is often performed in hydrometallurgical leaching using acidic media;however,this process is often hindered by solubility issues and passivation.To ensure high recoveries of these elements,ligands can be used to enhance dissolution.Carboxylic acids are used in conventional hydrometallurgical mineral processing,such as leaching,floatation,and solvent extraction,and are desired due to their affordability and stability.In this study,we explore the dissolution of waste cement pastes in acidic conditions under the presence of four carboxylic acid ligands:formate,acetate,glutamate,and citrate.The leaching kinetics are categorized and the pseudo-rate constants are established,demonstrating the advantages of these agents to enhance reaction rates in the general order of citrate⋙formate>acetate>glutamate>control.The characterization of the post-extraction reactor residue(PERR)revealed a significant increase in Si-content.Finally,the leachate was carbonated to produce calcium carbonate,which was characterized for its use based on morphology and size.Glutamate demonstrated distinct advantages compared to other ligands,with a dual function of not only improving leachability of cement but promoting and stabilizing vaterite during crystallization.Overall,this study motivates the use of sustainable ligands to enhance material recovery during the dissolution of alkaline wastes for carbon mineralization.
基金supported by the Henan Institute for Chinese Development Strategy of Engineering&Technology(Grant No.2022HENZDA02)by the Science&Technology Department of Sichuan Province Project(Grant No.2021YFH0010).
文摘Carbon neutrality(or climate neutrality)has been a global consensus,and international experience exchange is essential.Given the differences in the degree of social development,resource endowment and technological level,each country should build a carbon-neutral plan based on its national conditions.Compared with other major developed countries(e.g.,Germany,the United States and Japan),China's carbon neutrality has much bigger challenges,including a heavy and time-pressured carbon reduction task and the current energy structure that is over-dependent on fossil fuels.Here we provide a comprehensive review of the status and prospects of the key technologies for low-carbon,near-zero carbon,and negative carbon emissions.Technological innovations associated with coal,oil-gas and hydrogen industries and their future potential in reducing carbon emissions are particularly explained and assessed.Based on integrated analysis of international experience from the world's major developed countries,in-depth knowledge of the current and future technologies,and China's energy and ecological resources potential,five lessons for the implementation of China's carbon neutrality are proposed:(1)transformation of energy production pattern from a coal-dominated pattern to a diversified renewable energy pattern;(2)renewable power-to-X and large-scale underground energy storage;(3)integration of green hydrogen production,storage,transport and utilization;(4)construction of clean energy systems based on smart sector coupling(ENSYSCO);(5)improvement of ecosystem carbon sinks both in nationwide forest land and potential desert in Northwest China.This paper provides an international perspective for a better understanding of the challenges and opportunities of carbon neutrality in China,and can serve as a theoretical foundation for medium-long term carbon neutral policy formulation.
基金supported by the Creative Groups of Natural Science Foundation of Hubei Province,China(Grant No.2021CFA030)the National Natural Science Foundation of China(Grant Nos.41872210 and 41274111).
文摘The threshold values of CO_(2) gas stripped off membranous residual oil from the pore walls are not clear under different temperatures, pressures and wettability conditions. The extent to which temperature, pressure and wettability influence CO_(2) flooding for enhancing the recovery of residual oil in membranous formations also remains uncertain. Therefore, further quantitative characterization is entailed. In this study, the molecular dynamics method was employed to explore CO_(2) flooding under different temperatures, pressures and wettability conditions, aiming to enhance the production of membranous residual oil. The results reveal that the interaction energy between CO_(2), decane molecules and pore walls exhibits a decrease with increasing temperature and an increase with increasing pressure, respectively, in distinct wettability scenarios. When the temperature was at or below 363 K and the pressure was not lower than 40 MPa, CO_(2) gas could detach the membranous residual oil from the pore walls in the water-wet systems. When the temperature was equal to 363 K and the pressure remained under 40 MPa, or the temperature surpassed 363 K, CO_(2) gas failed to detach the membranous residual oil from the pore walls in the water-wet systems. For the mixed-wet and oil-wet systems, CO_(2) molecules could not detach the membranous residual oil from the pore walls. The hierarchy of influence regarding temperature, pressure and wettability on the competitive adsorption capacity of CO_(2) and decane molecules on the pore walls emerged as follows: wettability > temperature > pressure. The findings of this study offer valuable insights into the application of CO_(2) gas flooding for the exploitation of membranous residual oil on pore walls.
基金Acknowledgements The authors gratefully acknowledge the funding support from the National Key Basic Research Program of China （2013CB228500）, the National Natural Science Foundation of Chi- na （71203119）, and the Advanced Coal Technology Consortium of CERC （2016YFE0102500）.
文摘Coal is the dominant primary energy source in China and the major source of greenhouse gases and air pollutants. To facilitate the use of coal in an environmentally satisfactory and economically viable way, clean coal technologies （CCTs） are necessary. This paper presents a review of recent research and development of four kinds of CCTs： coal power generation; coal conversion; pollution control; and carbon capture, utilization, and storage. It also outlines future perspectives on directions for technology re search and development （R＆D）. This review shows that China has made remarkable progress in the R＆D of CCTs, and that a number of CCTs have now entered into the commercialization stage.
文摘Marine carbon sequestration is an important component of carbon dioxide capture, utilization and storage(CCUS) technology. It is crucial for achieving carbon peaking and carbon neutralization in China. However, CO_(2) leakage may lead to seabed geological disasters and threaten the safety of marine engineering. Therefore, it is of great significance to study the safety monitoring technology of marine carbon sequestration.Zhanjiang is industrially developed and rich in carbon sources. Owing to the good physical properties and reservoirs and trap characteristics,Zhanjiang has huge storage potential. This paper explores the disaster mechanism associated with CO_(2) leakage in marine carbon sequestration areas. Based on the analysis of the development of Zhanjiang industry and relevant domestic monitoring technologies, several suggestions for safety monitoring of marine carbon sequestration are proposed: application of offshore aquaculture platforms, expansion and application of ocean observation networks, carbon sequestration safety monitoring and sensing system. Intended to build a comprehensive and multi-level safety monitoring system for marine carbon sequestration, the outcome of this study provides assistance for the development of marine carbon sequestration in China's offshore areas.
基金the National Natural Science Foundation of China(Grant Nos.72174196 and 71874193)Open Fund of State Key Laboratory of Coal Resources and Safe Mining(China University of Mining and Technology)(Grant Nos.SKLCRSM21KFA05 and SKLCRSM22KFA09)the Fundamental Research Funds for the Central Universities(Grant No.2022JCCXNY02).
文摘Thecoal-to-liquidcoupledwithcarbon capture,utilization,and storage technology has the potential to reduce CO_(2)emissions,but its carbon footprint and cost assessment are still insufficient.In this paper,coal mining to oil production is taken as a life cycle to evaluate the carbon footprint and levelized costs of direct-coal-toliquid and indirect-coal-to-liquid coupled with the carbon capture utilization and storage technology under three scenarios:non capture,process capture,process and public capture throughout the life cycle.The results show that,first,the coupling carbon capture utilization and storage technology can reduce CO_(2)footprint by 28%-57%from 5.91 t CO_(2)/t:oil of direct-coal-to-liquid and 24%-49%from 7.10 t CO_(2)/t:oil of indirect-coal-to-liquid.Next,the levelized cost of direct-coal-to-liquid is 648-1027$/t of oil,whereas that of indirect-coal-to-liquid is 653-1065$/t of oil.When coupled with the carbon capture utilization and storage technology,the levelized cost of direct-coalto-liquid is 285-1364$/t of oil,compared to 1101-9793/t of oil for indirect-coal-to-liquid.Finally,sensitivity analysis shows that CO_(2)transportation distance has the greatest impact on carbon footprint,while coal price and initial investment cost significantly affect the levelized cost ofcoal-to-liquid.
基金the National Key R&D Program of China(No.2019YFB1504102).
文摘Geothermal energy is a kind of renewable,sustainable and clean energy resource.Geothermal energy is abundant in carbonate reservoirs.However,low matrix permeability limits its exploitation.The super-critical carbon dioxide(SC-CO_(2))jet fracturing is expected to efficiently stimulate the carbonate geothermal reservoirs and achieve the storage of CO_(2) simultaneously.In this paper,we established a transient seepage and fluid-thermo-mechanical coupled model to analyze the impact performance of sc-CO_(2) jet fracturing.The mesh-based parallel code coupling interface was employed to couple the fluid and solid domains by exchanging the data through the mesh interface.The physical properties change of sC-CO_(2) with temperature were considered in the numerical model.Results showed that SC-CO_(2) jet frac-turing is superior to water-jet fracturing with respect to jetting velocity,particle trajectory and pene-trability.Besides,stress distribution on the carbonate rock showed that the tensile and shear failure would more easily occur by SC-CO_(2) jet than that by water jet.Moreover,pressure and temperature control the jet field and seepage field of sC-CO_(2) simultaneously.Increasing the jet temperature can effectively enhance the impingement effect and seepage process by decreasing the viscosity and density of SC-CO_(2).The key findings are expected to provide a theoretical basis and design reference for applying SC-CO_(2) jet fracturing in carbonate geothermal reservoirs.
基金supported by the Zhejiang Provincial Natural Science Foundation of China(No.LDT23E0601)the“Pioneer”and“Leading Goose”R&D Program of Zhejiang(China)(No.2022C03146)+1 种基金the National Natural Science Foundation of China(Nos.U23A20677 and 22022610)the National Funded Postdoctoral Researcher Program of China(No.GZC20232363).
文摘Carbon capture,utilization and storage(CCUS)technologies play an essential role in achieving Net Zero Emissions targets.Considering the lack of timely reviews on the recent advancements in promising CCUS technologies,it is crucial to provide a prompt review of the CCUS advances to understand the current research gaps pertained to its industrial application.To that end,this review first summarized the developmental history of CCUS technologies and the current large-scale demonstrations.Then,based on a visually bibliometric analysis,the carbon capture remains a hotspot in the CCUS development.Noting that the materials applied in the carbon capture process determines its performance.As a result,the state-of-the-art carbon capture materials and emerging capture technologies were comprehensively summarized and discussed.Gaps between state-of-art carbon capture process and its ideal counterpart are analyzed,and insights into the research needs such as material design,process optimization,environmental impact,and technical and economic assessments are provided.
基金Project 2016YFB0601504 supported by National Key R&D Program of China is gratefully acknowledged.The authors are also grateful for the help about the NMR test from Dr.WAN Qiang in Institute of Chemistry,Chinese Academy of Sciences.
文摘Facing the global warming trend,humanity has been paying more and more attention to the Carbon Capture,Utilization and Storage.Large amounts of CO_(2)is emitted with burning fossil fuel as well as by some special industrial processes like the decomposition of calcium carbonate in a cement plant.The cement industry contributes about 7%of the total worldwide CO_(2)emissions and the CO_(2)concentration of flue gas of the cement kiln tail even exceeds 30%.Ionic liquid is considered to be an effective and potential material to capture CO_(2).In order to investigate the performance of ionic liquids for capturing CO_(2)from flue gas of the cement kiln tail,an experiment system was established and an ionic liquid,[APMIm][NTf_(2)](1-aminopropyl-3-imidazolium bis(trifluoromethylsulfonyl)imine),was tested using pure CO_(2)and simulated gas.The results showed that both physical and chemical absorption play roles while physical absorption dominates in the absorption process.Both the absorption capacity and rate decrease with raising the operating temperature.In the experiment with pure CO_(2),the absorption capacity is 0.296molCO_(2)⋅molIL−1 at 30℃ and 0.067molCO_(2)⋅molIL−1 at 70℃.Meanwhile,the ionic liquid can be regenerated for recycling without obvious changes of the absorption capacity.When the ionic liquid is used for flue gas of the cement kiln tail rather than pure CO_(2),a sharp decrease of the absorption capacity and rate was observed obviously.The absorption capacity at 30℃ dropped even to 0.038molCO_(2)⋅mol_(IL)^(−1),12.8%of that for pure CO_(2).Additionally,a natural desorption of CO_(2)from the ionic liquid was observed and affected the experimental results of the absorption capacity and the absorption-desorption rate to some extent.
