This research focused on the feasibility and treatment efficiency of Advance Oxidation Process(AOP)-UV/TiO2 for three different kinds of simulated dye wastewater(FBL,FBB and S-RL).The first part of this study investig...This research focused on the feasibility and treatment efficiency of Advance Oxidation Process(AOP)-UV/TiO2 for three different kinds of simulated dye wastewater(FBL,FBB and S-RL).The first part of this study investigated the treatment of simulated dye wastewater with UV/TiO2 by changing TiO2 dosages,TiO2 particle sizes and dye concentrations.The efficiency was measured by color removal and TOC removal.The optimum conditions obtained for treatment of different dye wastewater were different.The treatment of Indanthrene red(FBB) by UV/TiO2 was the best,with 99.68% of TOC removal percentage and nearly 100% of color removal while treatment of FBL with 96.11% of TOC removal and almost 100% of color removal.The removal efficiency was lowest for S-RL dye solution with 81.88% of TOC and 95.87% for color removal.Both Langmuir adsorption isotherm and modified Langmuir-Hinshelwood kinetic model(modified L-H model) were fitted to the experimental data and were able to correlate the adsorption patterns and the kinetics of the dyes studied.Since the photocatalysts(TiO2) used were nano-sized powder and is difficult to separate from the wastewater,the second part of this research focuses on the preparation of TiO2-film on glass-substrate and the treatment of simulated FBL dye wastewater by UV/TiO2-film oxidation then followed.The experimental results showed the TiO2-films are suitable only for the dye wastewater treatment in low concentration.展开更多
The degradation of formaldehyde gas was studied using UV/TiO2/O3 process under the condition of continuous flow mode. The effects of humidity, initial formaldehyde concentration, residence time and ozone adding amount...The degradation of formaldehyde gas was studied using UV/TiO2/O3 process under the condition of continuous flow mode. The effects of humidity, initial formaldehyde concentration, residence time and ozone adding amount on degradation of formaldehyde gas were investigated. The experimental results indicated that the combination of ozonation with photocatalytic oxidation on the degradation of formaldehyde showed a synergetic action, e.g,, it could considerably increase decomposing of formaldehyde. The degradation efficiency of formaldehyde was between 73.6% and 79.4% while the initial concentration in the range of 1.84--24 mg/m^3 by O3/TiO2flJV process. The optimal humidity was about 50% in UV/TiO2/O3 processs and degradation of formaldehyde increases from 39.0% to 94.1% when the ozone content increased from 0 to 141 mg/m^3. Furthermore, the kinetics of formaldehyde degradation reaction could be described by Langmuir-Hinshelwood model. The rate constant k of 46.72 mg/（m^3.min） and Langmuir adsorption coefficient K of 0.0268 m^3/mg were obtained.展开更多
[Objective] The paper aimed to study on the effects of photocatalytic degradation of microcystins MC-RR and MC-LR by UV/Fenton/TiO2 in depth lake water.[Method] With Fenton-TiO2 as photocatalyst,the influences of diff...[Objective] The paper aimed to study on the effects of photocatalytic degradation of microcystins MC-RR and MC-LR by UV/Fenton/TiO2 in depth lake water.[Method] With Fenton-TiO2 as photocatalyst,the influences of different reaction time,initial pH value,H2O2 concentration,Fe2+ concentration,TiO2 dosage,light intensity,initial concentration of microcystin on UV/Fenton/TiO2 heterogeneous photocatalytic degradation of microcystin were investigated,and removal effects of microcystin between heterogeneous photocatalytic degradation and UV photolysis were compared at the same time.[Result] Under the conditions that the initial concentration of H2O2 was 0.1 mmol/L,[H2O2]/[FeSO4] was 15:1,pH value was 4.0,the distance between the reaction solution and UV lamp tube was 1 cm,TiO2 dosage was 0.05 g/L,reaction temperature was (16±2) ℃,the removal rate of MC-RR with concentration of 0.35 mg/L and MC-LR with concentration of 0.29 mg/L could reach 91.5% and 90.2% after 3 minutes reacting.[Conclusion] UV/Fenton/TiO2 photocatalytic oxidation was proved to be effective in degradating microcystins.展开更多
Sb-doped SnO2(ATO)-(CeO2-TiO2) thin Films were deposited on glass substrates using the mixed solution including CeO2-TiO2 precursor and ATO particles by sol-gel dip coating process.ATO particles were prepared using lo...Sb-doped SnO2(ATO)-(CeO2-TiO2) thin Films were deposited on glass substrates using the mixed solution including CeO2-TiO2 precursor and ATO particles by sol-gel dip coating process.ATO particles were prepared using low-temperature hydrothermal process.The mixed molar ratio of ATO to(CeO2-TiO2) vs the properties of CeO2-TiO2 thin film was investigated.The optical properties of the films were characterized by UV-visible transmission and infrared reflection spectra,the sheet resistance of ATO particles and films were measured by rubber sheeter(MYI-50) and four-point probe(HisuperGroup Inc,SDY-5),the surface morphology and structure of the films were analyzed using 3D Digitale Mikroskop and X-ray diffraction(XRD),respectively.The results showed that the ATO precursor solution lost weight completely at about 500 oC,and the ATO particles was obtained,which indicated the same rutile lattice structure as SnO2.The glass substrates coated with ATO-(CeO2-TiO2) thin films showed better properties in antistatic electricity(104-106 Ω/),shielding UV(almost 100%),visible light transmission(70%) and infrared reflection(】30%).展开更多
Titanium dioxide (TiO_2) thin films were prepared on microscopes slides by sol-gel and dip-coating processes from specially formulated sols.The results show that there exists anatase and rutile structure of TiO_2 when...Titanium dioxide (TiO_2) thin films were prepared on microscopes slides by sol-gel and dip-coating processes from specially formulated sols.The results show that there exists anatase and rutile structure of TiO_2 when heat treatment temperature is 450℃,and at 800℃,TiO_2 particle size is of below 100 nm and rutile structure is presented.In the range of 360 nm～400 nm the transmittance of TiO_2 sol increases with the increasing of the concentration of Ti(OC_4H_9)_4 in ethanol solution. The transmittance of TiO_2 films with various number of the layer is measured to be 0% below 320 nm,and the three-layer TiO_2 film is of the best UV resistance in the range of 320 nm～400 nm.展开更多
Titanium dioxide （TiO2）, which is the widely used photo-catalyst, has been synthesized by simple hydrothermal solution containing tetrabntyl titanate and hydrofluoric acid. The synthesized product has been applied t...Titanium dioxide （TiO2）, which is the widely used photo-catalyst, has been synthesized by simple hydrothermal solution containing tetrabntyl titanate and hydrofluoric acid. The synthesized product has been applied to photo-degradation in aqueous phase of chlorinated solvents, namely tetra- chloroethene （PCE）, tdchloroethene （TCE） and 1,1,l-trichloroethane （TCA）. The photo-degradation results revealed that the degradation of these harmful chemicals was better in UV/synthesized TiO2 system compared to UV/commerciai P25 system and UV only system. The photo-catalytic efficiency of the synthesized TiO2 was 1.4, 1.8 and 3.0 folds higher compared to the commercial P25 for TCA, TCE and PCE degradation, respectively. Moreover, using nitrobenzene （NB） as a probe of hydroxyl radical （.OH）, the degradation rate was better over UV/synthesized TiO2, suggesting the high concentration of .OH generated in UV/synthesized TiO2 system. In addition, .OH concentration was confirmed by the strong peak displayed in EPR analysis over U~/synthesized TiO2 system. The characterization result using XRD and TEM showed that the synthesized TiO2 was in anatase form and consisted of well-defined sheet-shaped structures having a rectangular outline with a thickness of 4 rim, side length of 50 nm and width of 33 nra and a surface 90.3 m^2/g. XPS analysis revealed that ≡Ti-F bond was formed on the surface of the synthesized TiO2. The above results on both photocatalytic activity and the surface analysis demonstrated the good applicability of the synthesized TiO2 nano-sheets for the remediation of chlorinated solvent contaminated groundwater.展开更多
文摘This research focused on the feasibility and treatment efficiency of Advance Oxidation Process(AOP)-UV/TiO2 for three different kinds of simulated dye wastewater(FBL,FBB and S-RL).The first part of this study investigated the treatment of simulated dye wastewater with UV/TiO2 by changing TiO2 dosages,TiO2 particle sizes and dye concentrations.The efficiency was measured by color removal and TOC removal.The optimum conditions obtained for treatment of different dye wastewater were different.The treatment of Indanthrene red(FBB) by UV/TiO2 was the best,with 99.68% of TOC removal percentage and nearly 100% of color removal while treatment of FBL with 96.11% of TOC removal and almost 100% of color removal.The removal efficiency was lowest for S-RL dye solution with 81.88% of TOC and 95.87% for color removal.Both Langmuir adsorption isotherm and modified Langmuir-Hinshelwood kinetic model(modified L-H model) were fitted to the experimental data and were able to correlate the adsorption patterns and the kinetics of the dyes studied.Since the photocatalysts(TiO2) used were nano-sized powder and is difficult to separate from the wastewater,the second part of this research focuses on the preparation of TiO2-film on glass-substrate and the treatment of simulated FBL dye wastewater by UV/TiO2-film oxidation then followed.The experimental results showed the TiO2-films are suitable only for the dye wastewater treatment in low concentration.
基金Project supported by the Science Project of Harbin City(No. H2001-12)the Youth Foundation of School of Municipal and Environmental Engineering in Harbin Institute of Technology(No. 01306914).
文摘The degradation of formaldehyde gas was studied using UV/TiO2/O3 process under the condition of continuous flow mode. The effects of humidity, initial formaldehyde concentration, residence time and ozone adding amount on degradation of formaldehyde gas were investigated. The experimental results indicated that the combination of ozonation with photocatalytic oxidation on the degradation of formaldehyde showed a synergetic action, e.g,, it could considerably increase decomposing of formaldehyde. The degradation efficiency of formaldehyde was between 73.6% and 79.4% while the initial concentration in the range of 1.84--24 mg/m^3 by O3/TiO2flJV process. The optimal humidity was about 50% in UV/TiO2/O3 processs and degradation of formaldehyde increases from 39.0% to 94.1% when the ozone content increased from 0 to 141 mg/m^3. Furthermore, the kinetics of formaldehyde degradation reaction could be described by Langmuir-Hinshelwood model. The rate constant k of 46.72 mg/（m^3.min） and Langmuir adsorption coefficient K of 0.0268 m^3/mg were obtained.
基金Supported by the Social Development Scientific and Technolgical Project[GKHS-2007-1007]The Special Funds for Top Talents [GSZH-2007-108]The Special Project for Improving Researeh Conditionsof Guizhou [TZJF-2007-15]
文摘[Objective] The paper aimed to study on the effects of photocatalytic degradation of microcystins MC-RR and MC-LR by UV/Fenton/TiO2 in depth lake water.[Method] With Fenton-TiO2 as photocatalyst,the influences of different reaction time,initial pH value,H2O2 concentration,Fe2+ concentration,TiO2 dosage,light intensity,initial concentration of microcystin on UV/Fenton/TiO2 heterogeneous photocatalytic degradation of microcystin were investigated,and removal effects of microcystin between heterogeneous photocatalytic degradation and UV photolysis were compared at the same time.[Result] Under the conditions that the initial concentration of H2O2 was 0.1 mmol/L,[H2O2]/[FeSO4] was 15:1,pH value was 4.0,the distance between the reaction solution and UV lamp tube was 1 cm,TiO2 dosage was 0.05 g/L,reaction temperature was (16±2) ℃,the removal rate of MC-RR with concentration of 0.35 mg/L and MC-LR with concentration of 0.29 mg/L could reach 91.5% and 90.2% after 3 minutes reacting.[Conclusion] UV/Fenton/TiO2 photocatalytic oxidation was proved to be effective in degradating microcystins.
基金Project supported by the Changjiang Scholars and Innovative Research Team in University
文摘Sb-doped SnO2(ATO)-(CeO2-TiO2) thin Films were deposited on glass substrates using the mixed solution including CeO2-TiO2 precursor and ATO particles by sol-gel dip coating process.ATO particles were prepared using low-temperature hydrothermal process.The mixed molar ratio of ATO to(CeO2-TiO2) vs the properties of CeO2-TiO2 thin film was investigated.The optical properties of the films were characterized by UV-visible transmission and infrared reflection spectra,the sheet resistance of ATO particles and films were measured by rubber sheeter(MYI-50) and four-point probe(HisuperGroup Inc,SDY-5),the surface morphology and structure of the films were analyzed using 3D Digitale Mikroskop and X-ray diffraction(XRD),respectively.The results showed that the ATO precursor solution lost weight completely at about 500 oC,and the ATO particles was obtained,which indicated the same rutile lattice structure as SnO2.The glass substrates coated with ATO-(CeO2-TiO2) thin films showed better properties in antistatic electricity(104-106 Ω/),shielding UV(almost 100%),visible light transmission(70%) and infrared reflection(】30%).
文摘Titanium dioxide (TiO_2) thin films were prepared on microscopes slides by sol-gel and dip-coating processes from specially formulated sols.The results show that there exists anatase and rutile structure of TiO_2 when heat treatment temperature is 450℃,and at 800℃,TiO_2 particle size is of below 100 nm and rutile structure is presented.In the range of 360 nm～400 nm the transmittance of TiO_2 sol increases with the increasing of the concentration of Ti(OC_4H_9)_4 in ethanol solution. The transmittance of TiO_2 films with various number of the layer is measured to be 0% below 320 nm,and the three-layer TiO_2 film is of the best UV resistance in the range of 320 nm～400 nm.
基金supported by the National Environmental Protection Public Welfare Science and Technology Research Program of China(No.201109013)the National Natural Science Foundation of China(No.41373094,51208199)+2 种基金the Shanghai Natural Science Funds(No.12ZR1408000)the China Postdoctoral Science Foundation(No.2013T60429)the China Scholarship Councilfor PhD program at East China University of ScienceTechnology
文摘Titanium dioxide （TiO2）, which is the widely used photo-catalyst, has been synthesized by simple hydrothermal solution containing tetrabntyl titanate and hydrofluoric acid. The synthesized product has been applied to photo-degradation in aqueous phase of chlorinated solvents, namely tetra- chloroethene （PCE）, tdchloroethene （TCE） and 1,1,l-trichloroethane （TCA）. The photo-degradation results revealed that the degradation of these harmful chemicals was better in UV/synthesized TiO2 system compared to UV/commerciai P25 system and UV only system. The photo-catalytic efficiency of the synthesized TiO2 was 1.4, 1.8 and 3.0 folds higher compared to the commercial P25 for TCA, TCE and PCE degradation, respectively. Moreover, using nitrobenzene （NB） as a probe of hydroxyl radical （.OH）, the degradation rate was better over UV/synthesized TiO2, suggesting the high concentration of .OH generated in UV/synthesized TiO2 system. In addition, .OH concentration was confirmed by the strong peak displayed in EPR analysis over U~/synthesized TiO2 system. The characterization result using XRD and TEM showed that the synthesized TiO2 was in anatase form and consisted of well-defined sheet-shaped structures having a rectangular outline with a thickness of 4 rim, side length of 50 nm and width of 33 nra and a surface 90.3 m^2/g. XPS analysis revealed that ≡Ti-F bond was formed on the surface of the synthesized TiO2. The above results on both photocatalytic activity and the surface analysis demonstrated the good applicability of the synthesized TiO2 nano-sheets for the remediation of chlorinated solvent contaminated groundwater.
