Efficient and accurate simulation of unsteady flow presents a significant challenge that needs to be overcome in computational fluid dynamics.Temporal discretization method plays a crucial role in the simulation of un...Efficient and accurate simulation of unsteady flow presents a significant challenge that needs to be overcome in computational fluid dynamics.Temporal discretization method plays a crucial role in the simulation of unsteady flows.To enhance computational efficiency,we propose the Implicit-Explicit Two-Step Runge-Kutta(IMEX-TSRK)time-stepping discretization methods for unsteady flows,and develop a novel adaptive algorithm that correctly partitions spatial regions to apply implicit or explicit methods.The novel adaptive IMEX-TSRK schemes effectively handle the numerical stiffness of the small grid size and improve computational efficiency.Compared to implicit and explicit Runge-Kutta(RK)schemes,the IMEX-TSRK methods achieve the same order of accuracy with fewer first derivative calculations.Numerical case tests demonstrate that the IMEX-TSRK methods maintain numerical stability while enhancing computational efficiency.Specifically,in high Reynolds number flows,the computational efficiency of the IMEX-TSRK methods surpasses that of explicit RK schemes by more than one order of magnitude,and that of implicit RK schemes several times over.展开更多
[Objective]The research aimed to discuss the tolerance of Salix matsudana to single or compound heavy metals and provide theoretical basis for renovating polluted soil by heavy metals with woody plants.[Method]Using r...[Objective]The research aimed to discuss the tolerance of Salix matsudana to single or compound heavy metals and provide theoretical basis for renovating polluted soil by heavy metals with woody plants.[Method]Using root elongation method,the effects of heavy metal Cu^2＋,Pb^2＋,Zn^2＋ and their mixed solution on the adventitious roots growth of S.matsudana cuttings were studied.[Result]The adventitious roots growth of S.matsudana cuttings was obviously affected by different concentrations of heavy metals solution.Adventitious roots of S.matsudana cuttings could not grow while the concentration of Cu^2＋ was higher than 15 mg/L,the mixture solution concentration was higher than 20 mg/L and Zn^2＋ concentration was higher than 30 mg/L.When the solution concentration reached 40 mg/L,adventitious roots of S.matsudana cuttings could grow only in Pb^2＋ treatment group.With the increasing of the solution concentration,the number of adventitious roots of S.matsudana cuttings gradually decreased.In 5 mg/L Zn^2＋ treatment group,the number of adventitious roots of S.matsudana cuttings was the most,the longest root length and average root length were the longest and the rooting rate was the highest.[Conclusion]The tolerance of S.matsudana to Pb^2＋ was strongest and its tolerance to Cu^2＋ was the weakest.The tolerance order of S.matsudana to three kinds of heavy metals and their mixed solution was as following：Pb^2＋〉Zn^2＋〉Cu^2＋＋Pb^2＋＋Zn^2＋〉Cu^2＋.展开更多
Two modeling methods of the root insert for wind turbine blade are presented,i.e.,the local mesh optimization method(LMOM)and the global modeling method(GMM).Based on the optimized mesh of the local model for the meta...Two modeling methods of the root insert for wind turbine blade are presented,i.e.,the local mesh optimization method(LMOM)and the global modeling method(GMM).Based on the optimized mesh of the local model for the metal contact interface,LMOM is proposed to analyze the load path and stress distribution characteristics,while GMM is used to calculate and analyze the stress distribution characteristics of the resin layer established between the bushing and composite layers of root insert.To validate the GMM,a tension test is carried out.The result successfully shows that the shear strain expresses a similar strain distribution tendency with the GMM′s results.展开更多
Temperature-dependent photoluminescence characteristics of organic-inorganic halide perovskite CH3NH3Pb I3-xClx films prepared using a two-step method on ZnO/FTO substrates were investigated. Surface morphology and ab...Temperature-dependent photoluminescence characteristics of organic-inorganic halide perovskite CH3NH3Pb I3-xClx films prepared using a two-step method on ZnO/FTO substrates were investigated. Surface morphology and absorption characteristics of the films were also studied. Scanning electron microscopy revealed large crystals and substrate coverage. The orthorhombic-to-tetragonal phase transition temperature was-140 K. The films＇ exciton binding energy was 77.6 ± 10.9 meV and the energy of optical phonons was 38.8 ± 2.5 meV. These results suggest that perovskite CH3NH3Pb I（3-x）Clx films have excellent optoelectronic characteristics which further suggests their potential usage in perovskitebased optoelectronic devices.展开更多
A family of modal methods for computing eigenvector derivatives with repeated roots are directly derived from the constraint generalized inverse technique which is originally formulated by Wang and Hu. Extensions are ...A family of modal methods for computing eigenvector derivatives with repeated roots are directly derived from the constraint generalized inverse technique which is originally formulated by Wang and Hu. Extensions are made to Akgun's method to allow treatment of eigensensitivity with repeated roots for general nondefective systems, and Bernard and Bronowicki's modal expansion approach is expanded to a family of modal methods.展开更多
This is a study of the Durand-Kerner and Nourein methods for finding the roots of a given algebraic equation simultaneously. We consider the conditions under which the iterative methods fail. The numerical example is ...This is a study of the Durand-Kerner and Nourein methods for finding the roots of a given algebraic equation simultaneously. We consider the conditions under which the iterative methods fail. The numerical example is presented.展开更多
The distribution of remaining oil is often described qualitatively. The remaining oil distributed in the whole reservoir is calculated according to the characteristics of the space distribution of the saturation of re...The distribution of remaining oil is often described qualitatively. The remaining oil distributed in the whole reservoir is calculated according to the characteristics of the space distribution of the saturation of remaining oil. Logging data are required to accomplish this. However, many such projects cannot be completed. Since the old study of remaining oil distribution could not be quantified efficiently, the ＂dynamic two-step method＂ is presented. Firstly, the water cut of every flow unit in one well at one time is calculated according to the comprehensive water cut of a single well at one time. Secondly, the remaining oil saturation of the flow unit of the well at one time is calculated based on the water cut of the flow unit at a given time. The results show that ＂dynamic two-step method＂ has characteristics of simplicity and convenience, and is especially suitable for the study of remaining oil distribution at high water-cut stage. The distribution of remaining oil presented banding and potato form, remaining oil was relatively concentrated in faultage neighborhood and imperfect well netting position, and the net thickness of the place was great. This proposal can provide an effective way to forecast remaining oil distribution and enhance oil recovery, especially applied at the high water-cut stage.展开更多
This study investigated multi-response optimization of the pulse metal active gas-tungsten inert gas( PMAG-TIG) twin arc hybrid root welding process for an optimal parametric combination to yield favorable back bead g...This study investigated multi-response optimization of the pulse metal active gas-tungsten inert gas( PMAG-TIG) twin arc hybrid root welding process for an optimal parametric combination to yield favorable back bead geometry of welded joints using grey relational analysis and Taguchi method.Eighteen experimental runs based on an orthogonal array following the Taguchi method were performed to derive objective functions to be optimized within the experimental domain.The objective functions were selected in relation to parameters of PMAG-TIG twin arc root welding back bead geometry: back bead width to root reinforcement ratio and deposited metal height.The Taguchi approach was followed by grey relational analysis to solve the multi-response optimization problem.The significance of factors on overall quality characteristics of the weld joint was also evaluated quantitatively using analysis of variance.Optimal results were verified through additional experiments,and showed to feasibility of applying grey relation analysis in combination with Taguchi technique for continuous improvement of product quality in the manufacturing industry.展开更多
The objectives of this study were to evaluate growth, yield and nutrients removal of five cassava cultivars planted by different planting methods in late rainy season of northeastern Thailand. A split plot design was ...The objectives of this study were to evaluate growth, yield and nutrients removal of five cassava cultivars planted by different planting methods in late rainy season of northeastern Thailand. A split plot design was used in this study. The planting methods (vertical and horizontal) were assigned as main-plots. Cassava cultivars (Rayong-7, Rayong-11, Rayong-72, Huaybong-80 and E-dum) were assigned as sub-plots with four replications. Results showed that vertical planting gave significantly higher fresh storage root yield than those of horizontal planting, across five cassava cultivars. The cultivar Rayong-7 produced maximum fresh storage root yield across two planting methods, but not significantly different from Rayong 11, Huaybong 80 and Edum cultivars. Irrespective of nutrient removal, N, P and K removed ranges from 2.9 - 3.6, 0.8 - 1.3 and 5.3 - 7.9 kg per ton fresh root weight, respectively depending on cassava cultivar. The cultivar Rayong-7 removed the highest quantities of N, and the cultivar Rayong-11 removed maximum of P and K in the present study. Regardless of nutrient removal at different plant parts;N, P and K removed maximum quantities in leaf, stem and storage root, respectively. Planting method had no significant effect on N and P removal, but significant effect on K removal. The vertical planting removed K higher than those of horizontal planting.展开更多
The root system is an important organ that plants absorb nutrients from the soil, and can synthesize the vital substances necessary for the plant. However, the study on root system is burdened with great challenges du...The root system is an important organ that plants absorb nutrients from the soil, and can synthesize the vital substances necessary for the plant. However, the study on root system is burdened with great challenges due to its underground roots. In order to further explore the research methods and techniques of plant roots, the research mainly reviewed the research methods of root system, and summarized the methods of conventional root research, such as digging method, core drilling method, container method and isotope method. The progress of CT scan method, ground penetrating radar, special environmental culture method, nucle- ar magnetic resonance method and CCD three-dimensional imaging method were reviewed. Prospects for plant root research were made according to the trends of root research methods usincl hiqh-end technolo.qy at home and abroad.展开更多
In this note we at first briefly review iterative methods for effectively approaching a root of an unknown multiplicity. We describe a first order, then a second order estimate for the multiplicity index m of the appr...In this note we at first briefly review iterative methods for effectively approaching a root of an unknown multiplicity. We describe a first order, then a second order estimate for the multiplicity index m of the approached root. Next we present a second order, two-step method for iteratively nearing a root of an unknown multiplicity. Subsequently, we introduce a novel chord, or a two- step method, not requiring beforehand knowledge of the multiplicity index m of the sought root, nor requiring higher order derivatives of the equilibrium function, which is quadratically convergent for any , and then reverts to superlinear.展开更多
ZnO/graphene oxide（ZnO/GO） composite material,in which ZnO nanoparticles were densely coated on the GO nanosheets,was successfully prepared by an improved two-step method and characterized by IR, XRD,TEM,and UV-vis ...ZnO/graphene oxide（ZnO/GO） composite material,in which ZnO nanoparticles were densely coated on the GO nanosheets,was successfully prepared by an improved two-step method and characterized by IR, XRD,TEM,and UV-vis techniques.The improved photocatalytic property of the ZnO/GO composite material,evaluated by the photocatalytic degradation of methyl orange（MO） under UV irradiation,is ascribed to the intimate contact between ZnO and GO,the enhanced adsorption of MO,the quick electron transfer from excited ZnO particles to GO sheets and the activation of MO molecules viaπ-πinteraction between MO and GO.展开更多
We propose and demonstrate an original geometric argument for the ancient Babylonian square root method, which is analyzed and compared to the Newton-Raphson method. Based on simple geometry and algebraic analysis the...We propose and demonstrate an original geometric argument for the ancient Babylonian square root method, which is analyzed and compared to the Newton-Raphson method. Based on simple geometry and algebraic analysis the former original iterated map is derived and reinterpreted. Time series, fixed points, stability analysis and convergence schemes are studied and compared for both methods, in the approach of discrete dynamical systems.展开更多
In this paper,a two-step iteration method is established which can be viewed as a generalization of the existing modulus-based methods for vertical linear complementarity problems given by He and Vong(Appl.Math.Lett.1...In this paper,a two-step iteration method is established which can be viewed as a generalization of the existing modulus-based methods for vertical linear complementarity problems given by He and Vong(Appl.Math.Lett.134:108344,2022).The convergence analysis of the proposed method is established,which can improve the existing results.Numerical examples show that the proposed method is efficient with the two-step technique.展开更多
This paper considers practical, high-order methods for the iterative location of the roots of nonlinear equations, one at a time. Special attention is being paid to algorithms also applicable to multiple roots of init...This paper considers practical, high-order methods for the iterative location of the roots of nonlinear equations, one at a time. Special attention is being paid to algorithms also applicable to multiple roots of initially known and unknown multiplicity. Efficient methods are presented in this note for the evaluation of the multiplicity index of the root being sought. Also reviewed here are super-linear and super-cubic methods that converge contrarily or alternatingly, enabling us, not only to approach the root briskly and confidently but also to actually bound and bracket it as we progress.展开更多
Under the assumption that the nonlinear operator has Lipschitz continuous divided differences for the first order,we obtain an estimate of the radius of the convergence ball for the two-step secant method.Moreover,we ...Under the assumption that the nonlinear operator has Lipschitz continuous divided differences for the first order,we obtain an estimate of the radius of the convergence ball for the two-step secant method.Moreover,we also provide an error estimate that matches the convergence order of the two-step secant method.At last,we give an application of the proposed theorem.展开更多
Purpose: The aim of this systematic review was to answer the question “Which treatment protocol, am- ong classical methods and/or various laser applica- tions is the most effective in root canal disinfection, in vitr...Purpose: The aim of this systematic review was to answer the question “Which treatment protocol, am- ong classical methods and/or various laser applica- tions is the most effective in root canal disinfection, in vitro”. Materials and Methods: A MEDLINE, a Co- chrane and an Embase search (three specified search- es) were conducted to identify randomized controlled trials (RCT) until June 2010, conducted on human teeth and published in English, German or French language, examining the root canal disinfection after the use of lasers with or without mechanical instru-mentation. Additionally, hand search was conducted and contact with authors, when needed. Results: The MEDLINE, the Cochrane and the EMBASE search identified 240, 28, and 35 published articles, respec-tively. Ten articles from the MEDLINE and 5 articles from the Cochrane search (that were also identified in the MEDLINE search) met the inclusion and va-lidity assessment criteria. In E. faecalis elimination, instrumentation of the root canal and diode laser/665 nanometer/1 Watt (diode laser/665 nm/1 W) irradia-tion with the combined effect of Methylene Blue (MB) as photosensitizing agent (logCFU/ml = 1636) seemed to be the best method. In P. aeruginosa and in A.naeslundii elimination, instrumentation of the root canal followed by irrigation with 5, 25% NaOCl (log-CFU/ml = 0) seemed to be the best method. In gen-eral, instrumentation of the root canal followed by irrigation with 5, 25% NaOCl (logCFU/ml = 0) and instrumentation of the root canal and Er: YAG laser/ 2940 nm/0.8 W irradiation (logCFU/ml = 1924) seemed to be the best (polymicrobial studies). Conclusions: There are treatment protocols with the assistance or not of laser irradiation that can eliminate E. faecalis, E. coli and S. aureus inside the root canal. However, there is a serious number of S. anginosus, F. nuclea-tum, A. naeslundii and P. aeruginosa that remain in-side the root canal even after laser irradiation. New research is needed in order to set a treatment proto-col effective in the root canal disinfection from all bac-teria that are related to endodontic origin pathology.展开更多
In this paper, an accelerated iteration method for simultaneously determining of a polynomial equation’s roots is proposed. The new method is an improvement of modified Newton method. At the same time, convergence pr...In this paper, an accelerated iteration method for simultaneously determining of a polynomial equation’s roots is proposed. The new method is an improvement of modified Newton method. At the same time, convergence properties and the order of convergence rate are discussed. At last, some numerical results are reported and listed.展开更多
A method for precise calculation of tooth root stress of spiral bevel gears is presentedand developed. On the basis of the machine settings analysis, tooth geometry anaysis and loadedtooth contact analysis, by using t...A method for precise calculation of tooth root stress of spiral bevel gears is presentedand developed. On the basis of the machine settings analysis, tooth geometry anaysis and loadedtooth contact analysis, by using the tooth surface distribution load from tooth load analysis, thecalculation model is established and the root stress is calculated by means of finite element meth-od. The method mentioned is verified by a tested gears example.展开更多
Tin(Sn)-lead(Pb)mixed halide perovskites have attracted widespread interest due to their wider re-sponse wavelength and lower toxicity than lead halide perovskites,Among the preparation methods,the two-step method mor...Tin(Sn)-lead(Pb)mixed halide perovskites have attracted widespread interest due to their wider re-sponse wavelength and lower toxicity than lead halide perovskites,Among the preparation methods,the two-step method more easily controls the crystallization rate and is suitable for preparing large-area per-ovskite devices.However,the residual low-conductivity iodide layer in the two-step method can affect carrier transport and device stability,and the different crystallization rates of Sn-and Pb-based per-ovskites may result in poor film quality.Therefore,Sn-Pb mixed perovskites are mainly prepared by a one-step method.Herein,a MAPb_(0.5)Sn_(0.5)I_(3)-based self-powered photodetector without a hole transport layer is fabricated by a two-step method.By adjusting the concentration of the ascorbic acid(AA)addi-tive,the final perovskite film exhibited a pure phase without residues,and the optimal device exhibited a high responsivity(0.276 A W^(-1)),large specific detectivity(2.38×10^(12) Jones),and enhanced stability.This enhancement is mainly attributed to the inhibition of Sn2+oxidation,the control of crystal growth,and the sufficient reaction between organic ammonium salts and bottom halides due to the AA-induced pore structure.展开更多
基金supported by the National Natural Science Foundation of China(No.92252201)the Fundamental Research Funds for the Central Universitiesthe Academic Excellence Foundation of Beihang University(BUAA)for PhD Students。
文摘Efficient and accurate simulation of unsteady flow presents a significant challenge that needs to be overcome in computational fluid dynamics.Temporal discretization method plays a crucial role in the simulation of unsteady flows.To enhance computational efficiency,we propose the Implicit-Explicit Two-Step Runge-Kutta(IMEX-TSRK)time-stepping discretization methods for unsteady flows,and develop a novel adaptive algorithm that correctly partitions spatial regions to apply implicit or explicit methods.The novel adaptive IMEX-TSRK schemes effectively handle the numerical stiffness of the small grid size and improve computational efficiency.Compared to implicit and explicit Runge-Kutta(RK)schemes,the IMEX-TSRK methods achieve the same order of accuracy with fewer first derivative calculations.Numerical case tests demonstrate that the IMEX-TSRK methods maintain numerical stability while enhancing computational efficiency.Specifically,in high Reynolds number flows,the computational efficiency of the IMEX-TSRK methods surpasses that of explicit RK schemes by more than one order of magnitude,and that of implicit RK schemes several times over.
基金Supported by Natural Science Foundation of Anhui University(KJ2007B120)Doctor Foundation Projects of Anhui Agricultural University (WD2006-12)~~
文摘[Objective]The research aimed to discuss the tolerance of Salix matsudana to single or compound heavy metals and provide theoretical basis for renovating polluted soil by heavy metals with woody plants.[Method]Using root elongation method,the effects of heavy metal Cu^2＋,Pb^2＋,Zn^2＋ and their mixed solution on the adventitious roots growth of S.matsudana cuttings were studied.[Result]The adventitious roots growth of S.matsudana cuttings was obviously affected by different concentrations of heavy metals solution.Adventitious roots of S.matsudana cuttings could not grow while the concentration of Cu^2＋ was higher than 15 mg/L,the mixture solution concentration was higher than 20 mg/L and Zn^2＋ concentration was higher than 30 mg/L.When the solution concentration reached 40 mg/L,adventitious roots of S.matsudana cuttings could grow only in Pb^2＋ treatment group.With the increasing of the solution concentration,the number of adventitious roots of S.matsudana cuttings gradually decreased.In 5 mg/L Zn^2＋ treatment group,the number of adventitious roots of S.matsudana cuttings was the most,the longest root length and average root length were the longest and the rooting rate was the highest.[Conclusion]The tolerance of S.matsudana to Pb^2＋ was strongest and its tolerance to Cu^2＋ was the weakest.The tolerance order of S.matsudana to three kinds of heavy metals and their mixed solution was as following：Pb^2＋〉Zn^2＋〉Cu^2＋＋Pb^2＋＋Zn^2＋〉Cu^2＋.
基金supported jointly by the National Basic Research Program of China("973"Program)(No2014CB046200)the National Science Foundation of Jiangsu Province(No.BK2014059)+1 种基金the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe National Natural Science Foundation of China(No.11172135)
文摘Two modeling methods of the root insert for wind turbine blade are presented,i.e.,the local mesh optimization method(LMOM)and the global modeling method(GMM).Based on the optimized mesh of the local model for the metal contact interface,LMOM is proposed to analyze the load path and stress distribution characteristics,while GMM is used to calculate and analyze the stress distribution characteristics of the resin layer established between the bushing and composite layers of root insert.To validate the GMM,a tension test is carried out.The result successfully shows that the shear strain expresses a similar strain distribution tendency with the GMM′s results.
基金supported by the International Science and Technology Cooperation Program of Science and Technology Bureau of Changchun City,China(Grant No.12ZX68)
文摘Temperature-dependent photoluminescence characteristics of organic-inorganic halide perovskite CH3NH3Pb I3-xClx films prepared using a two-step method on ZnO/FTO substrates were investigated. Surface morphology and absorption characteristics of the films were also studied. Scanning electron microscopy revealed large crystals and substrate coverage. The orthorhombic-to-tetragonal phase transition temperature was-140 K. The films＇ exciton binding energy was 77.6 ± 10.9 meV and the energy of optical phonons was 38.8 ± 2.5 meV. These results suggest that perovskite CH3NH3Pb I（3-x）Clx films have excellent optoelectronic characteristics which further suggests their potential usage in perovskitebased optoelectronic devices.
基金The project supported by the National Natural Science Foundation of China
文摘A family of modal methods for computing eigenvector derivatives with repeated roots are directly derived from the constraint generalized inverse technique which is originally formulated by Wang and Hu. Extensions are made to Akgun's method to allow treatment of eigensensitivity with repeated roots for general nondefective systems, and Bernard and Bronowicki's modal expansion approach is expanded to a family of modal methods.
文摘This is a study of the Durand-Kerner and Nourein methods for finding the roots of a given algebraic equation simultaneously. We consider the conditions under which the iterative methods fail. The numerical example is presented.
文摘The distribution of remaining oil is often described qualitatively. The remaining oil distributed in the whole reservoir is calculated according to the characteristics of the space distribution of the saturation of remaining oil. Logging data are required to accomplish this. However, many such projects cannot be completed. Since the old study of remaining oil distribution could not be quantified efficiently, the ＂dynamic two-step method＂ is presented. Firstly, the water cut of every flow unit in one well at one time is calculated according to the comprehensive water cut of a single well at one time. Secondly, the remaining oil saturation of the flow unit of the well at one time is calculated based on the water cut of the flow unit at a given time. The results show that ＂dynamic two-step method＂ has characteristics of simplicity and convenience, and is especially suitable for the study of remaining oil distribution at high water-cut stage. The distribution of remaining oil presented banding and potato form, remaining oil was relatively concentrated in faultage neighborhood and imperfect well netting position, and the net thickness of the place was great. This proposal can provide an effective way to forecast remaining oil distribution and enhance oil recovery, especially applied at the high water-cut stage.
基金supported by the National Natural Science Foundation of China(Grant No.11375038)Science Fund for Creative Research Groups of NSFC(Grant No.51621064)
文摘This study investigated multi-response optimization of the pulse metal active gas-tungsten inert gas( PMAG-TIG) twin arc hybrid root welding process for an optimal parametric combination to yield favorable back bead geometry of welded joints using grey relational analysis and Taguchi method.Eighteen experimental runs based on an orthogonal array following the Taguchi method were performed to derive objective functions to be optimized within the experimental domain.The objective functions were selected in relation to parameters of PMAG-TIG twin arc root welding back bead geometry: back bead width to root reinforcement ratio and deposited metal height.The Taguchi approach was followed by grey relational analysis to solve the multi-response optimization problem.The significance of factors on overall quality characteristics of the weld joint was also evaluated quantitatively using analysis of variance.Optimal results were verified through additional experiments,and showed to feasibility of applying grey relation analysis in combination with Taguchi technique for continuous improvement of product quality in the manufacturing industry.
文摘The objectives of this study were to evaluate growth, yield and nutrients removal of five cassava cultivars planted by different planting methods in late rainy season of northeastern Thailand. A split plot design was used in this study. The planting methods (vertical and horizontal) were assigned as main-plots. Cassava cultivars (Rayong-7, Rayong-11, Rayong-72, Huaybong-80 and E-dum) were assigned as sub-plots with four replications. Results showed that vertical planting gave significantly higher fresh storage root yield than those of horizontal planting, across five cassava cultivars. The cultivar Rayong-7 produced maximum fresh storage root yield across two planting methods, but not significantly different from Rayong 11, Huaybong 80 and Edum cultivars. Irrespective of nutrient removal, N, P and K removed ranges from 2.9 - 3.6, 0.8 - 1.3 and 5.3 - 7.9 kg per ton fresh root weight, respectively depending on cassava cultivar. The cultivar Rayong-7 removed the highest quantities of N, and the cultivar Rayong-11 removed maximum of P and K in the present study. Regardless of nutrient removal at different plant parts;N, P and K removed maximum quantities in leaf, stem and storage root, respectively. Planting method had no significant effect on N and P removal, but significant effect on K removal. The vertical planting removed K higher than those of horizontal planting.
文摘The root system is an important organ that plants absorb nutrients from the soil, and can synthesize the vital substances necessary for the plant. However, the study on root system is burdened with great challenges due to its underground roots. In order to further explore the research methods and techniques of plant roots, the research mainly reviewed the research methods of root system, and summarized the methods of conventional root research, such as digging method, core drilling method, container method and isotope method. The progress of CT scan method, ground penetrating radar, special environmental culture method, nucle- ar magnetic resonance method and CCD three-dimensional imaging method were reviewed. Prospects for plant root research were made according to the trends of root research methods usincl hiqh-end technolo.qy at home and abroad.
文摘In this note we at first briefly review iterative methods for effectively approaching a root of an unknown multiplicity. We describe a first order, then a second order estimate for the multiplicity index m of the approached root. Next we present a second order, two-step method for iteratively nearing a root of an unknown multiplicity. Subsequently, we introduce a novel chord, or a two- step method, not requiring beforehand knowledge of the multiplicity index m of the sought root, nor requiring higher order derivatives of the equilibrium function, which is quadratically convergent for any , and then reverts to superlinear.
基金supported by the Natural Science Foundation of China(No.21174114)the Ministry of Education Plan for Yangtze River Scholar and Innovation Team Development(No.IRT1177)+2 种基金Scientific and Technical Plan Project of Gansu Province(No. 1204GKCA006)the Natural Science Foundation of Gansu Province (No.1010RJZA024)Scientific and Technical Innovation Project of Northwest Normal University(No.nwnu-kjcxgc-03-63)
文摘ZnO/graphene oxide（ZnO/GO） composite material,in which ZnO nanoparticles were densely coated on the GO nanosheets,was successfully prepared by an improved two-step method and characterized by IR, XRD,TEM,and UV-vis techniques.The improved photocatalytic property of the ZnO/GO composite material,evaluated by the photocatalytic degradation of methyl orange（MO） under UV irradiation,is ascribed to the intimate contact between ZnO and GO,the enhanced adsorption of MO,the quick electron transfer from excited ZnO particles to GO sheets and the activation of MO molecules viaπ-πinteraction between MO and GO.
文摘We propose and demonstrate an original geometric argument for the ancient Babylonian square root method, which is analyzed and compared to the Newton-Raphson method. Based on simple geometry and algebraic analysis the former original iterated map is derived and reinterpreted. Time series, fixed points, stability analysis and convergence schemes are studied and compared for both methods, in the approach of discrete dynamical systems.
基金supported by the Scientific Computing Research Innovation Team of Guangdong Province(no.2021KCXTD052)the Science and Technology Development Fund,Macao SAR(no.0096/2022/A,0151/2022/A)+3 种基金University of Macao(no.MYRG2020-00035-FST,MYRG2022-00076-FST)the Guangdong Key Construction Discipline Research Capacity Enhancement Project(no.2022ZDJS049)Technology Planning Project of Shaoguan(no.210716094530390)the ScienceFoundation of Shaoguan University(no.SZ2020KJ01).
文摘In this paper,a two-step iteration method is established which can be viewed as a generalization of the existing modulus-based methods for vertical linear complementarity problems given by He and Vong(Appl.Math.Lett.134:108344,2022).The convergence analysis of the proposed method is established,which can improve the existing results.Numerical examples show that the proposed method is efficient with the two-step technique.
文摘This paper considers practical, high-order methods for the iterative location of the roots of nonlinear equations, one at a time. Special attention is being paid to algorithms also applicable to multiple roots of initially known and unknown multiplicity. Efficient methods are presented in this note for the evaluation of the multiplicity index of the root being sought. Also reviewed here are super-linear and super-cubic methods that converge contrarily or alternatingly, enabling us, not only to approach the root briskly and confidently but also to actually bound and bracket it as we progress.
基金supported by National Natural Science Foundation of China(11771393,11371320,11632015)Zhejiang Natural Science Foundation(LZ14A010002,LQ18A010008)Scientific Research Fund of Zhejiang Provincial Education Department(FX2016073)
文摘Under the assumption that the nonlinear operator has Lipschitz continuous divided differences for the first order,we obtain an estimate of the radius of the convergence ball for the two-step secant method.Moreover,we also provide an error estimate that matches the convergence order of the two-step secant method.At last,we give an application of the proposed theorem.
文摘Purpose: The aim of this systematic review was to answer the question “Which treatment protocol, am- ong classical methods and/or various laser applica- tions is the most effective in root canal disinfection, in vitro”. Materials and Methods: A MEDLINE, a Co- chrane and an Embase search (three specified search- es) were conducted to identify randomized controlled trials (RCT) until June 2010, conducted on human teeth and published in English, German or French language, examining the root canal disinfection after the use of lasers with or without mechanical instru-mentation. Additionally, hand search was conducted and contact with authors, when needed. Results: The MEDLINE, the Cochrane and the EMBASE search identified 240, 28, and 35 published articles, respec-tively. Ten articles from the MEDLINE and 5 articles from the Cochrane search (that were also identified in the MEDLINE search) met the inclusion and va-lidity assessment criteria. In E. faecalis elimination, instrumentation of the root canal and diode laser/665 nanometer/1 Watt (diode laser/665 nm/1 W) irradia-tion with the combined effect of Methylene Blue (MB) as photosensitizing agent (logCFU/ml = 1636) seemed to be the best method. In P. aeruginosa and in A.naeslundii elimination, instrumentation of the root canal followed by irrigation with 5, 25% NaOCl (log-CFU/ml = 0) seemed to be the best method. In gen-eral, instrumentation of the root canal followed by irrigation with 5, 25% NaOCl (logCFU/ml = 0) and instrumentation of the root canal and Er: YAG laser/ 2940 nm/0.8 W irradiation (logCFU/ml = 1924) seemed to be the best (polymicrobial studies). Conclusions: There are treatment protocols with the assistance or not of laser irradiation that can eliminate E. faecalis, E. coli and S. aureus inside the root canal. However, there is a serious number of S. anginosus, F. nuclea-tum, A. naeslundii and P. aeruginosa that remain in-side the root canal even after laser irradiation. New research is needed in order to set a treatment proto-col effective in the root canal disinfection from all bac-teria that are related to endodontic origin pathology.
文摘In this paper, an accelerated iteration method for simultaneously determining of a polynomial equation’s roots is proposed. The new method is an improvement of modified Newton method. At the same time, convergence properties and the order of convergence rate are discussed. At last, some numerical results are reported and listed.
文摘A method for precise calculation of tooth root stress of spiral bevel gears is presentedand developed. On the basis of the machine settings analysis, tooth geometry anaysis and loadedtooth contact analysis, by using the tooth surface distribution load from tooth load analysis, thecalculation model is established and the root stress is calculated by means of finite element meth-od. The method mentioned is verified by a tested gears example.
基金supported by the National Natural Science Foun-dation of China(Nos.52025028,52332008,52372214,52202273,and U22A20137)the Priority Academic Program Development(PAPD)of Jiangsu Higher Education Institutions.
文摘Tin(Sn)-lead(Pb)mixed halide perovskites have attracted widespread interest due to their wider re-sponse wavelength and lower toxicity than lead halide perovskites,Among the preparation methods,the two-step method more easily controls the crystallization rate and is suitable for preparing large-area per-ovskite devices.However,the residual low-conductivity iodide layer in the two-step method can affect carrier transport and device stability,and the different crystallization rates of Sn-and Pb-based per-ovskites may result in poor film quality.Therefore,Sn-Pb mixed perovskites are mainly prepared by a one-step method.Herein,a MAPb_(0.5)Sn_(0.5)I_(3)-based self-powered photodetector without a hole transport layer is fabricated by a two-step method.By adjusting the concentration of the ascorbic acid(AA)addi-tive,the final perovskite film exhibited a pure phase without residues,and the optimal device exhibited a high responsivity(0.276 A W^(-1)),large specific detectivity(2.38×10^(12) Jones),and enhanced stability.This enhancement is mainly attributed to the inhibition of Sn2+oxidation,the control of crystal growth,and the sufficient reaction between organic ammonium salts and bottom halides due to the AA-induced pore structure.
