Radar target probing and measurement are challenging tasks for Radio Frequency Simulation（RFS） with pulse radar signal. Due to the long-time duration of pulse radar signal and the limited space of anechoic chamber, ...Radar target probing and measurement are challenging tasks for Radio Frequency Simulation（RFS） with pulse radar signal. Due to the long-time duration of pulse radar signal and the limited space of anechoic chamber, the reflected signal returns before pulse radar signal is fully transmitted in RFS. As a consequence, the transmitted and reflected signals are coupled at the receiver. To handle this problem, the Interrupted Transmitting and Receiving（ITR） experiment system is constructed in this paper by dividing the pulse radar signal into sub-pulses. The target echo can be obtained by transmitting and receiving the sub-pulses intermittently. Furthermore, the principles of ITR are discussed and the target probing experiments are performed with the ITR system. It is demonstrated that the ITR system can overcome the coupling between the reflected and transmitted signals. Based on the target probing results, the performance of pulse radar target probing and measurement can be verified in RFS with the ITR system.展开更多
A two-dimensional rectangular solenoid transmitting coil is proposed to address the problem that the three-dimensional receiving coil occupies excessive space inside the capsule robot.The transmitting coil consists of...A two-dimensional rectangular solenoid transmitting coil is proposed to address the problem that the three-dimensional receiving coil occupies excessive space inside the capsule robot.The transmitting coil consists of two pairs of rectangular solenoid coils distributed radially along the human body.By changing the direction of current flow,it can generate a two-dimensional magnetic field covering the whole central plane.Firstly,the working mechanism of the wireless power transfer system is introduced,and then the spatial electromagnetic field generated by the transmitting coil is analyzed through both mathematical calculations and finite element simulations.Finally,an experimental platform is built to determine the optimal resonant frequency of the system and validate its feasibility based on the power transfer efficiency and the receiving power.The experimental results demonstrate that when the receiving coil is located at the center of the coil pair,the receiving power is 1416 mW and the power transfer efficiency is 3.96%.Additionally,when the receiving coil operates in the central plane,it can receive sufficient energy regardless of the orientation.展开更多
Construction of LNG receiving terminals The scale of receiving terminals is expanding rapidly At the end of 1999,the state approved the Guangdong LNG Pilot Project,which opened the prelude to the construction of LNG r...Construction of LNG receiving terminals The scale of receiving terminals is expanding rapidly At the end of 1999,the state approved the Guangdong LNG Pilot Project,which opened the prelude to the construction of LNG receiving terminals.In 2006,China's first LNG receiving terminal,namely Dapeng LNG Receiving Terminal in Shenzhen,Guangdong Province,was put into operation,marking the beginning of the use of overseas natural gas in China.展开更多
Large dynamic range and ultra-wideband receiving abilities are significant for many receivers. With these abilities, receivers can obtain signals with different power in ultra-wideband frequency space without informat...Large dynamic range and ultra-wideband receiving abilities are significant for many receivers. With these abilities, receivers can obtain signals with different power in ultra-wideband frequency space without information loss. However, conventional receiving scheme is hard to have large dynamic range and ultra-wideband receiving simultaneously because of the analog-to-digital converter(ADC) dynamic range and sample rate limitations. In this paper, based on the modulated sampling and unlimited sampling, a novel receiving scheme is proposed to achieve large dynamic range and ultra-wideband receiving. Focusing on the single carrier signals, the proposed scheme only uses a single self-rest ADC(SR-ADC) with low sample rate, and it achieves large dynamic range and ultra-wideband receiving simultaneously. Two receiving scenarios are considered, and they are cooperative strong signal receiving and non-cooperative strong/weak signals receiving. In the cooperative receiving scenario, an improved fast recovery method is proposed to obtain the modulated sampling output. In the non-cooperative receiving scenario, the strong and weak signals with different carrier frequencies are considered, and the signal processing method can recover and estimate each signal. Simulation results show that the proposed scheme can realize large dynamic range and ultra-wideband receiving simultaneously when the input signal-to-noise(SNR) ratio is high.展开更多
An optimizing method for designing the wireless power receiving coil(RC)is proposed in this paper to address issues such as insufficient and fluctuating power supply in the near-infrared capsule robot.An elec-tromagne...An optimizing method for designing the wireless power receiving coil(RC)is proposed in this paper to address issues such as insufficient and fluctuating power supply in the near-infrared capsule robot.An elec-tromagnetic and circuit analysis is conducted to establish the magnetic induction intensity and equivalent circuit models for the wireless power transmission system.Combining these models involves using the number of layers in each dimension as the optimization variable.Constraints are imposed based on the normalized standard deviation of the receiving-end load power and spatial dimensions.At the same time,the optimization objective aims to maximize the average power of the receiving-end load.This process leads to formulating an optimization model for the RC.Finally,three-dimensional RCs with three different sets of parameters are wound,and the receiving-end load power of these coils is experimentally tested under various drive currents.The experimental values of the receiving-end load power exhibit a consistent trend with theoretical values,with experimental values consistently lower than theoretical values.The optimized coil parameters are determined by conducting comparative exper-iments,with a theoretical value of 4.6%for the normalized standard deviation of the receiving-end load power and an average experimental value of 9.6%.The study addressed the power supply issue of near-infrared capsule robots,which is important for early diagnosing and treating gastrointestinal diseases.展开更多
Currently, the selection of receiving traces in geometry design is mostly based on the horizontal layered medium hypothesis, which is unable to meet survey requirements in a complex area. This paper estimates the opti...Currently, the selection of receiving traces in geometry design is mostly based on the horizontal layered medium hypothesis, which is unable to meet survey requirements in a complex area. This paper estimates the optimal number of receiving traces in field geometry using a numerical simulation based on a field test conducted in previous research （Zhu et al., 2011）. A mathematical model is established for total energy and average efficiency energy using fixed trace spacing and optimal receiving traces are estimated. Seismic data acquired in a complex work area are used to verify the correctness of the proposed method. Results of model data calculations and actual data processing show that results are in agreement. This indicates that the proposed method is reasonable, correct, sufficiently scientific, and can be regarded as a novel method for use in seismic geometry design in complex geological regions.展开更多
The finite element artificial transmitting boundary method is employed here to treat the near field scattering of a cylindrical wave from an irregular cylinder. A comparison is made between this method and the analy...The finite element artificial transmitting boundary method is employed here to treat the near field scattering of a cylindrical wave from an irregular cylinder. A comparison is made between this method and the analytical one. And then examples are given to demonstrate the solution of several problems of the irregular object scattering. The method can not only produce clear physical pictures, but can efficiently handle many complicated scattering problems.展开更多
To obtain good trade-offs between complexity and performance onpeak-to-average power ratio (PAPR) reduction in orthogonal frequency division multiplexing (OFDM)using partial transmitting sequence (PTS) schemes, a trel...To obtain good trade-offs between complexity and performance onpeak-to-average power ratio (PAPR) reduction in orthogonal frequency division multiplexing (OFDM)using partial transmitting sequence (PTS) schemes, a trellis structure based PTS factor searchmethod is proposed. The trellis search is with a variant constraint length L_C, 1 ≤ L_C ≤ V-1,where V is the number of PTS subblocks. The method is to decide a PTS factor by searching all thepossible paths obtained by varying L_C consecutive factors. The trellis search can be viewed as ageneral PTS factor search model. If L_C = V-1, it is a full search, and if L_C = 1, it is aniterative search. Using different constraint lengths, trellis factor search PTS exhibits differentPAPR reduction performances. A larger L_C results in a better performance and L_C = V-1 results inthe optimum. However, a larger L_C requires more computation. This helps to choose a good trade-offbetween complexity and performance.展开更多
2.5 Gbit/s monolithic integrated circuits （ICs） for optical fiber transmitter and receiver in 0.35 μm CMOS （complementary metal-oxide-semiconductor transistor） process are presented. The transmitter, which includ...2.5 Gbit/s monolithic integrated circuits （ICs） for optical fiber transmitter and receiver in 0.35 μm CMOS （complementary metal-oxide-semiconductor transistor） process are presented. The transmitter, which includes a 4： 1 multiplexer and a laser diode driver （LDD）, has four 622 Mbit/s random signals as its inputs and gets a 2.5 Gbit/s driving signal as its output; the receiver detects a 2.5 Gbit/s random signal and gets four 622 Mbit/s signals at the output. The main circuits include a trans-impedance amplifier （TIA）, a limiting amplifier, a clock and data recovery （CDR） unit, and a 1： 4 demultiplexer （DEMUX）. Test results prove the logic functions of the transmitter to be right, and the 10% to 90% rise and fall times of transmitter＇s output data eye diagram are 211.1 ps and 200 ps, respectively. The sensitivity of the receiver is measured to be better than 20 mV. The root mean square jitter of the DEMUX＇s output data is 15.6 ps and that of the clock after 1： 4 frequency dividing is 1.9 ps. Two chips are both applicable to 2.5 Gbit/s optical fiber communication systems.展开更多
The downlink minimum bit error rate (MBER) transmit beamforming is directly designed based on the uplink MBER receive beamforming solution for time division duplex (TDD) space-division multiple-access (SDMA) induced m...The downlink minimum bit error rate (MBER) transmit beamforming is directly designed based on the uplink MBER receive beamforming solution for time division duplex (TDD) space-division multiple-access (SDMA) induced multiple-input multiple-output (MIMO) systems, where the base station (BS) is equipped with multiple antennas to support multiple single-antenna mobile terminals (MTs). It is shown that the dual relationship between multiuser detection and multiuser transmission can be extended to the rank-deficient system where the number of users supported is more than the number of transmit antennas available at the BS, if the MBER design is adopted. The proposed MBER transmit beamforming scheme is capable of achieving better performance over the standard minimum mean square error transmit beamforming solution with the support of low-complexity and high power-efficient MTs, particularly for rank-deficient TDD-SDMA MIMO systems. The robustness of the proposed MBER transmit beamforming design to the downlink and uplink noise or channel mismatch is investigated using simulation.展开更多
We investigated image processing algorithms of the original infrared glass flaw image. Using the Laplacian edge enhancement following LSD （Line Segment Detector） algorithm, we can get a good flaw image very consiste...We investigated image processing algorithms of the original infrared glass flaw image. Using the Laplacian edge enhancement following LSD （Line Segment Detector） algorithm, we can get a good flaw image very consistent with the original one. This study is very helpful to further enhance the infrared glass flaw inspection technique.展开更多
Radio frequency identification(RFID) is a ubiquitous identification technology nowadays. An on-chip high-performance transmit/receive(T/R) switch is designed and simulated in 0.13-μm CMOS technology for reader-less R...Radio frequency identification(RFID) is a ubiquitous identification technology nowadays. An on-chip high-performance transmit/receive(T/R) switch is designed and simulated in 0.13-μm CMOS technology for reader-less RFID tag. The switch utilizes only the transistor width and length(W/L) optimization, proper gate bias resistor and resistive body floating technique and therefore,exhibits 1 d B insertion loss, 31.5 d B isolation and 29.2 d Bm 1-d B compression point(P1d B). Moreover, the switch dissipates only786.7 n W power for 1.8/0 V control voltages and is capable of switching in 794 fs. Above all, as there is no inductor or capacitor used in the circuit, the size of the switch is 0.00208 mm2 only. This switch will be appropriate for reader-less RFID tag transceiver front-end as well as other wireless transceivers operated at 2.4 GHz band.展开更多
Based on the modified scale boundary finite element method and continued fraction solution,a high-order doubly asymptotic transmitting boundary(DATB)is derived and extended to the simulation of vector wave propagation...Based on the modified scale boundary finite element method and continued fraction solution,a high-order doubly asymptotic transmitting boundary(DATB)is derived and extended to the simulation of vector wave propagation in complex layered soils.The high-order DATB converges rapidly to the exact solution throughout the entire frequency range and its formulation is local in the time domain,possessing high accuracy and good efficiency.Combining with finite element method,a coupled model is constructed for time-domain analysis of underground station-layered soil interaction.The coupled model is divided into the near and far field by the truncated boundary,of which the near field is modelled by FEM while the far field is modelled by the high-order DATB.The coupled model is implemented in an open source finite element software,OpenSees,in which the DATB is employed as a super element.Numerical examples demonstrate that results of the coupled model are stable,accurate and efficient compared with those of the extended mesh model and the viscous-spring boundary model.Besides,it has also shown the fitness for long-time seismic response analysis of underground station-layered soil interaction.Therefore,it is believed that the coupled model could provide a new approach for seismic analysis of underground station-layered soil interaction and could be further developed for engineering.展开更多
Anthropogenic activities usually contaminate water environments, and have led to the eutrophication of many estuaries and shifts in microbial communities. In this study, the temporal and spatial changes of the microbi...Anthropogenic activities usually contaminate water environments, and have led to the eutrophication of many estuaries and shifts in microbial communities. In this study, the temporal and spatial changes of the microbial community in an industrial effluent receiving area in Hangzhou Bay were investigated by 454 pyrosequencing. The bacterial community showed higher richness and biodiversity than the archaeal community in all sediments. Proteobacteria dominated in the bacterial communities of all the samples; MarineGroupⅠand Methanomicrobia were the two dominant archaeal classes in the effluent receiving area. PCoA and AMOVA revealed strong seasonal but minor spatial changes in both bacterial and archaeal communities in the sediments. The seasonal changes of the bacterial community were less significant than those of the archaeal community, which mainly consisted of fluctuations in abundance of a large proportion of longstanding species rather than the appearance and disappearance of major archaeal species. Temperature was found to positively correlate with the dominant bacteria, Betaproteobacteria, and negatively correlate with the dominant archaea,MarineGroupⅠ; and might be the primary driving force for the seasonal variation of the microbial community.展开更多
Hyperthyroidism refers to a clinical state that results from inappropriately hight hyroid hormone levels in the tissues;.Ⅰ-131 therapy plays a critical role and provides a remarkable curative effect in targeting thyr...Hyperthyroidism refers to a clinical state that results from inappropriately hight hyroid hormone levels in the tissues;.Ⅰ-131 therapy plays a critical role and provides a remarkable curative effect in targeting thyroid diseases. Thyroid cells can take up isotope I-131, which emits not only beta rays but also展开更多
Objective: To survey the level and patterns of reverse transcriptase-based drug resistance and subtype distribution among antiretroviral-treated HIV-infected patients receiving only reverse transcriptase inhibitors in...Objective: To survey the level and patterns of reverse transcriptase-based drug resistance and subtype distribution among antiretroviral-treated HIV-infected patients receiving only reverse transcriptase inhibitors in Iran.Methods: A total of 25 samples of antiretroviral therapy experienced patients with no history of using protease inhibitors were collected. After RNA extraction, reverse transcriptase-nested PCR was performed. The final products were sequenced and then analysed for drug-resistant mutations and subtypes.Results: No drug resistant mutations were observed among the 25 subjects. The results showed the following subtypes among patients: CRF 35_AD(88%), CRF 28_BF(8%),and CRF 29_BF(4%).Conclusions: A significant increase in drug resistance has been noted in recentlyinfected patients worldwide. Subtype distributions are needed to perform properlydesigned surveillance studies to continuously monitor rates and patterns of transmitted drug resistance and subtypes to help guide therapeutic approaches and limit transmission of these variants.展开更多
Local coupling instability will occur when the numerical scheme of absorbing boundary condition and that of the field wave equation allow energies to spontaneously enter into the computational domain. That is, the two...Local coupling instability will occur when the numerical scheme of absorbing boundary condition and that of the field wave equation allow energies to spontaneously enter into the computational domain. That is, the two schemes support common wave solutions with group velocity pointed into the computation domain. The key to eliminate local coupling instability is to avoid such wave solutions. For lumped-mass finite element simulation of P-SV wave motion in a 2D waveguide, an approach for stable implementation of high order multi-transmitting formula is provided. With a uniform rectangular mesh, it is proven and validated that high-freqaency local coupling instability can be eliminated by setting the ratio of the element size equal to or greater than x/2 times the ratio of the P wave velocity to the S wave velocity. These results can be valuable for dealing instability problems induced by other absorbing boundary conditions.展开更多
The transmitting properties of acoustic emission(AE) signal is investigated in order to provide experimental basis for application of AE technique. In the paper, the influences of the geometric shape and material prop...The transmitting properties of acoustic emission(AE) signal is investigated in order to provide experimental basis for application of AE technique. In the paper, the influences of the geometric shape and material properties of the mediums and the bearing type on AE transmission are analyzed for providing the theoretic foundation for selecting the transmission route of AE signal and the fixing location of the AE sensor reasonably. According to the transmitting properties of AE, an apparatus of detecting AE signal for the tool breakage monitoring system has been set up. Its application results show that it is of benefit to improving the sensitivity of the tool breakage monitoring system.展开更多
We introduce a new transmit/receive dipole pair array to obtain a compact quasi\|monostatic antenna structure for ground penetrating radar systems.And we analyze this transmit/receive dipole pair array in time domain....We introduce a new transmit/receive dipole pair array to obtain a compact quasi\|monostatic antenna structure for ground penetrating radar systems.And we analyze this transmit/receive dipole pair array in time domain.The numerical results show that if the distance between the transmit antenna and receive antenna is appropriate the array configuration is adoptable.展开更多
As different power has its own receivers,this paper analyzes and designs a multiple-receiver wireless power transfer(WPT)system systematically.The equivalent circuit model of the system is established to analyze the k...As different power has its own receivers,this paper analyzes and designs a multiple-receiver wireless power transfer(WPT)system systematically.The equivalent circuit model of the system is established to analyze the key parameters including transmitter power,receiver power,transmission efficiency,and each receiver power allocation.A control circuit is proposed to achieve the maximum transmission efficiency and transmitter power control and arbitrary receiver power allocation ratios for different receivers.Through the proposed control circuit,receivers with different loads can allocate appropriate power according to its power demand,the transmitter power and system efficiency do not vary with the change of the number of receivers.Finally,this control circuit is validated using a 130-kHz WPT system with three receivers whose power received is 3:10:12,and the overall system efficiency can reach as high as 55.5%.展开更多
基金supported in part by the National Natural Science Foundation of China(Nos.61101180,61401491 and 61490692)
文摘Radar target probing and measurement are challenging tasks for Radio Frequency Simulation（RFS） with pulse radar signal. Due to the long-time duration of pulse radar signal and the limited space of anechoic chamber, the reflected signal returns before pulse radar signal is fully transmitted in RFS. As a consequence, the transmitted and reflected signals are coupled at the receiver. To handle this problem, the Interrupted Transmitting and Receiving（ITR） experiment system is constructed in this paper by dividing the pulse radar signal into sub-pulses. The target echo can be obtained by transmitting and receiving the sub-pulses intermittently. Furthermore, the principles of ITR are discussed and the target probing experiments are performed with the ITR system. It is demonstrated that the ITR system can overcome the coupling between the reflected and transmitted signals. Based on the target probing results, the performance of pulse radar target probing and measurement can be verified in RFS with the ITR system.
基金the National Natural Science Foundation of China(Nos.62273225,81971767,62103267 and 62103263)。
文摘A two-dimensional rectangular solenoid transmitting coil is proposed to address the problem that the three-dimensional receiving coil occupies excessive space inside the capsule robot.The transmitting coil consists of two pairs of rectangular solenoid coils distributed radially along the human body.By changing the direction of current flow,it can generate a two-dimensional magnetic field covering the whole central plane.Firstly,the working mechanism of the wireless power transfer system is introduced,and then the spatial electromagnetic field generated by the transmitting coil is analyzed through both mathematical calculations and finite element simulations.Finally,an experimental platform is built to determine the optimal resonant frequency of the system and validate its feasibility based on the power transfer efficiency and the receiving power.The experimental results demonstrate that when the receiving coil is located at the center of the coil pair,the receiving power is 1416 mW and the power transfer efficiency is 3.96%.Additionally,when the receiving coil operates in the central plane,it can receive sufficient energy regardless of the orientation.
文摘Construction of LNG receiving terminals The scale of receiving terminals is expanding rapidly At the end of 1999,the state approved the Guangdong LNG Pilot Project,which opened the prelude to the construction of LNG receiving terminals.In 2006,China's first LNG receiving terminal,namely Dapeng LNG Receiving Terminal in Shenzhen,Guangdong Province,was put into operation,marking the beginning of the use of overseas natural gas in China.
文摘Large dynamic range and ultra-wideband receiving abilities are significant for many receivers. With these abilities, receivers can obtain signals with different power in ultra-wideband frequency space without information loss. However, conventional receiving scheme is hard to have large dynamic range and ultra-wideband receiving simultaneously because of the analog-to-digital converter(ADC) dynamic range and sample rate limitations. In this paper, based on the modulated sampling and unlimited sampling, a novel receiving scheme is proposed to achieve large dynamic range and ultra-wideband receiving. Focusing on the single carrier signals, the proposed scheme only uses a single self-rest ADC(SR-ADC) with low sample rate, and it achieves large dynamic range and ultra-wideband receiving simultaneously. Two receiving scenarios are considered, and they are cooperative strong signal receiving and non-cooperative strong/weak signals receiving. In the cooperative receiving scenario, an improved fast recovery method is proposed to obtain the modulated sampling output. In the non-cooperative receiving scenario, the strong and weak signals with different carrier frequencies are considered, and the signal processing method can recover and estimate each signal. Simulation results show that the proposed scheme can realize large dynamic range and ultra-wideband receiving simultaneously when the input signal-to-noise(SNR) ratio is high.
基金the Project of the Science and Technology Commission of Shanghai Municipality(No.20142201300)the National Facility for Translational Medicine(Shanghai)Open Project Foundation(No.TMSK-2021-302)the China Postdoctoral Science Foundation(No.2023M732267)。
文摘An optimizing method for designing the wireless power receiving coil(RC)is proposed in this paper to address issues such as insufficient and fluctuating power supply in the near-infrared capsule robot.An elec-tromagnetic and circuit analysis is conducted to establish the magnetic induction intensity and equivalent circuit models for the wireless power transmission system.Combining these models involves using the number of layers in each dimension as the optimization variable.Constraints are imposed based on the normalized standard deviation of the receiving-end load power and spatial dimensions.At the same time,the optimization objective aims to maximize the average power of the receiving-end load.This process leads to formulating an optimization model for the RC.Finally,three-dimensional RCs with three different sets of parameters are wound,and the receiving-end load power of these coils is experimentally tested under various drive currents.The experimental values of the receiving-end load power exhibit a consistent trend with theoretical values,with experimental values consistently lower than theoretical values.The optimized coil parameters are determined by conducting comparative exper-iments,with a theoretical value of 4.6%for the normalized standard deviation of the receiving-end load power and an average experimental value of 9.6%.The study addressed the power supply issue of near-infrared capsule robots,which is important for early diagnosing and treating gastrointestinal diseases.
基金supported by the National Natural Science Foundation of China(No.41304115)National Key S&T Special Projects(No.2016ZX050 24001-003)+2 种基金Open Fund for Sichuan Province Key Laboratory of Natural Gas Geology(No.2015trqdz02)the Research Project,CNPC(No.2016A-33)"Young and Middle-aged Key Teachers"Training Program in Southwest Petroleum University
文摘Currently, the selection of receiving traces in geometry design is mostly based on the horizontal layered medium hypothesis, which is unable to meet survey requirements in a complex area. This paper estimates the optimal number of receiving traces in field geometry using a numerical simulation based on a field test conducted in previous research （Zhu et al., 2011）. A mathematical model is established for total energy and average efficiency energy using fixed trace spacing and optimal receiving traces are estimated. Seismic data acquired in a complex work area are used to verify the correctness of the proposed method. Results of model data calculations and actual data processing show that results are in agreement. This indicates that the proposed method is reasonable, correct, sufficiently scientific, and can be regarded as a novel method for use in seismic geometry design in complex geological regions.
文摘The finite element artificial transmitting boundary method is employed here to treat the near field scattering of a cylindrical wave from an irregular cylinder. A comparison is made between this method and the analytical one. And then examples are given to demonstrate the solution of several problems of the irregular object scattering. The method can not only produce clear physical pictures, but can efficiently handle many complicated scattering problems.
文摘To obtain good trade-offs between complexity and performance onpeak-to-average power ratio (PAPR) reduction in orthogonal frequency division multiplexing (OFDM)using partial transmitting sequence (PTS) schemes, a trellis structure based PTS factor searchmethod is proposed. The trellis search is with a variant constraint length L_C, 1 ≤ L_C ≤ V-1,where V is the number of PTS subblocks. The method is to decide a PTS factor by searching all thepossible paths obtained by varying L_C consecutive factors. The trellis search can be viewed as ageneral PTS factor search model. If L_C = V-1, it is a full search, and if L_C = 1, it is aniterative search. Using different constraint lengths, trellis factor search PTS exhibits differentPAPR reduction performances. A larger L_C results in a better performance and L_C = V-1 results inthe optimum. However, a larger L_C requires more computation. This helps to choose a good trade-offbetween complexity and performance.
基金The National High Technology Research and Develop-ment Program of China (863 Program) (No.2001AA312010).
文摘2.5 Gbit/s monolithic integrated circuits （ICs） for optical fiber transmitter and receiver in 0.35 μm CMOS （complementary metal-oxide-semiconductor transistor） process are presented. The transmitter, which includes a 4： 1 multiplexer and a laser diode driver （LDD）, has four 622 Mbit/s random signals as its inputs and gets a 2.5 Gbit/s driving signal as its output; the receiver detects a 2.5 Gbit/s random signal and gets four 622 Mbit/s signals at the output. The main circuits include a trans-impedance amplifier （TIA）, a limiting amplifier, a clock and data recovery （CDR） unit, and a 1： 4 demultiplexer （DEMUX）. Test results prove the logic functions of the transmitter to be right, and the 10% to 90% rise and fall times of transmitter＇s output data eye diagram are 211.1 ps and 200 ps, respectively. The sensitivity of the receiver is measured to be better than 20 mV. The root mean square jitter of the DEMUX＇s output data is 15.6 ps and that of the clock after 1： 4 frequency dividing is 1.9 ps. Two chips are both applicable to 2.5 Gbit/s optical fiber communication systems.
文摘The downlink minimum bit error rate (MBER) transmit beamforming is directly designed based on the uplink MBER receive beamforming solution for time division duplex (TDD) space-division multiple-access (SDMA) induced multiple-input multiple-output (MIMO) systems, where the base station (BS) is equipped with multiple antennas to support multiple single-antenna mobile terminals (MTs). It is shown that the dual relationship between multiuser detection and multiuser transmission can be extended to the rank-deficient system where the number of users supported is more than the number of transmit antennas available at the BS, if the MBER design is adopted. The proposed MBER transmit beamforming scheme is capable of achieving better performance over the standard minimum mean square error transmit beamforming solution with the support of low-complexity and high power-efficient MTs, particularly for rank-deficient TDD-SDMA MIMO systems. The robustness of the proposed MBER transmit beamforming design to the downlink and uplink noise or channel mismatch is investigated using simulation.
基金Funded by the Program for New Century Excellent Talents in University (11-0687)the National Natural Science Foundation of China (51172169)the Fundamental Research Funds for the Central Universities (Wuhan University of Technology)
文摘We investigated image processing algorithms of the original infrared glass flaw image. Using the Laplacian edge enhancement following LSD （Line Segment Detector） algorithm, we can get a good flaw image very consistent with the original one. This study is very helpful to further enhance the infrared glass flaw inspection technique.
基金supported by the research grant Economic Transformation Programme (ETP-2013-037) from Universiti Kebangsaan Malaysia and the Ministry of Science, Technology and Innovation (MOSTI) respectively
文摘Radio frequency identification(RFID) is a ubiquitous identification technology nowadays. An on-chip high-performance transmit/receive(T/R) switch is designed and simulated in 0.13-μm CMOS technology for reader-less RFID tag. The switch utilizes only the transistor width and length(W/L) optimization, proper gate bias resistor and resistive body floating technique and therefore,exhibits 1 d B insertion loss, 31.5 d B isolation and 29.2 d Bm 1-d B compression point(P1d B). Moreover, the switch dissipates only786.7 n W power for 1.8/0 V control voltages and is capable of switching in 794 fs. Above all, as there is no inductor or capacitor used in the circuit, the size of the switch is 0.00208 mm2 only. This switch will be appropriate for reader-less RFID tag transceiver front-end as well as other wireless transceivers operated at 2.4 GHz band.
基金This research investigation was supported by the National Natural Science Foundation of China(Grant No.51678248 and Grant No.51878296)the Fundamental Research Funds for the Central Universities.And sincere thanks also to State Key Lab of Subtropical Building Science,South China University of Technology under Grant No.2017KB15 and the Open Research Fund of State Key Laboratory of Simulation and Regulation of Water Cycle in River Basin under Grant No.IWHRSKL-KF201818.
文摘Based on the modified scale boundary finite element method and continued fraction solution,a high-order doubly asymptotic transmitting boundary(DATB)is derived and extended to the simulation of vector wave propagation in complex layered soils.The high-order DATB converges rapidly to the exact solution throughout the entire frequency range and its formulation is local in the time domain,possessing high accuracy and good efficiency.Combining with finite element method,a coupled model is constructed for time-domain analysis of underground station-layered soil interaction.The coupled model is divided into the near and far field by the truncated boundary,of which the near field is modelled by FEM while the far field is modelled by the high-order DATB.The coupled model is implemented in an open source finite element software,OpenSees,in which the DATB is employed as a super element.Numerical examples demonstrate that results of the coupled model are stable,accurate and efficient compared with those of the extended mesh model and the viscous-spring boundary model.Besides,it has also shown the fitness for long-time seismic response analysis of underground station-layered soil interaction.Therefore,it is believed that the coupled model could provide a new approach for seismic analysis of underground station-layered soil interaction and could be further developed for engineering.
基金supported by a General Project granted by the National Natural Science Foundation of China (No. 51178002)
文摘Anthropogenic activities usually contaminate water environments, and have led to the eutrophication of many estuaries and shifts in microbial communities. In this study, the temporal and spatial changes of the microbial community in an industrial effluent receiving area in Hangzhou Bay were investigated by 454 pyrosequencing. The bacterial community showed higher richness and biodiversity than the archaeal community in all sediments. Proteobacteria dominated in the bacterial communities of all the samples; MarineGroupⅠand Methanomicrobia were the two dominant archaeal classes in the effluent receiving area. PCoA and AMOVA revealed strong seasonal but minor spatial changes in both bacterial and archaeal communities in the sediments. The seasonal changes of the bacterial community were less significant than those of the archaeal community, which mainly consisted of fluctuations in abundance of a large proportion of longstanding species rather than the appearance and disappearance of major archaeal species. Temperature was found to positively correlate with the dominant bacteria, Betaproteobacteria, and negatively correlate with the dominant archaea,MarineGroupⅠ; and might be the primary driving force for the seasonal variation of the microbial community.
基金supported by a fund from the Key Project of Natural Science Foundation of Tianjin [16JCZDJC36100]Medical and Health Technology Innovation Project of the Chinese Academy of Medical Sciences [2017-I2M-1-016]+2 种基金Fundamental Research Funds for the Central Universities [3332018116]PUMC Youth Fund [3332015101]Fundamental Research Funds for CAMS&PUMC [2016ZX310074]
文摘Hyperthyroidism refers to a clinical state that results from inappropriately hight hyroid hormone levels in the tissues;.Ⅰ-131 therapy plays a critical role and provides a remarkable curative effect in targeting thyroid diseases. Thyroid cells can take up isotope I-131, which emits not only beta rays but also
基金The study protocol was performed according to the Helsinki Declaration and approved by Tarbiat Modares University ethical committee(Reg No.1389-9).
文摘Objective: To survey the level and patterns of reverse transcriptase-based drug resistance and subtype distribution among antiretroviral-treated HIV-infected patients receiving only reverse transcriptase inhibitors in Iran.Methods: A total of 25 samples of antiretroviral therapy experienced patients with no history of using protease inhibitors were collected. After RNA extraction, reverse transcriptase-nested PCR was performed. The final products were sequenced and then analysed for drug-resistant mutations and subtypes.Results: No drug resistant mutations were observed among the 25 subjects. The results showed the following subtypes among patients: CRF 35_AD(88%), CRF 28_BF(8%),and CRF 29_BF(4%).Conclusions: A significant increase in drug resistance has been noted in recentlyinfected patients worldwide. Subtype distributions are needed to perform properlydesigned surveillance studies to continuously monitor rates and patterns of transmitted drug resistance and subtypes to help guide therapeutic approaches and limit transmission of these variants.
基金the Key Projects in the National Science & Technology Pillar Program during the Twelfth Five-year Plan Period(Grant No.2015BAK17B01)Science Foundation of Institute of Engineering Mechanics,CEA under Grant No.2014B10+1 种基金Natural Science Foundation of Heilongjiang Province of China under Grant No.LC201403National Natural Science Foundation under Grant No.51378479 and No.51108431
文摘Local coupling instability will occur when the numerical scheme of absorbing boundary condition and that of the field wave equation allow energies to spontaneously enter into the computational domain. That is, the two schemes support common wave solutions with group velocity pointed into the computation domain. The key to eliminate local coupling instability is to avoid such wave solutions. For lumped-mass finite element simulation of P-SV wave motion in a 2D waveguide, an approach for stable implementation of high order multi-transmitting formula is provided. With a uniform rectangular mesh, it is proven and validated that high-freqaency local coupling instability can be eliminated by setting the ratio of the element size equal to or greater than x/2 times the ratio of the P wave velocity to the S wave velocity. These results can be valuable for dealing instability problems induced by other absorbing boundary conditions.
基金Supported by the Laboratory of Robotics, Chinese Academy of Sciences
文摘The transmitting properties of acoustic emission(AE) signal is investigated in order to provide experimental basis for application of AE technique. In the paper, the influences of the geometric shape and material properties of the mediums and the bearing type on AE transmission are analyzed for providing the theoretic foundation for selecting the transmission route of AE signal and the fixing location of the AE sensor reasonably. According to the transmitting properties of AE, an apparatus of detecting AE signal for the tool breakage monitoring system has been set up. Its application results show that it is of benefit to improving the sensitivity of the tool breakage monitoring system.
基金Supported jointly by a Grand Project of the National Natural Science Foundation of China and the Changjiang Water Resources Commission(50099620)
文摘We introduce a new transmit/receive dipole pair array to obtain a compact quasi\|monostatic antenna structure for ground penetrating radar systems.And we analyze this transmit/receive dipole pair array in time domain.The numerical results show that if the distance between the transmit antenna and receive antenna is appropriate the array configuration is adoptable.
基金supported by the National Natural Science Foundation of China under Grant No.51574198Nanchong City 2018 Special Fund for City-School Cooperation under Grant No.18SXHZ0021
文摘As different power has its own receivers,this paper analyzes and designs a multiple-receiver wireless power transfer(WPT)system systematically.The equivalent circuit model of the system is established to analyze the key parameters including transmitter power,receiver power,transmission efficiency,and each receiver power allocation.A control circuit is proposed to achieve the maximum transmission efficiency and transmitter power control and arbitrary receiver power allocation ratios for different receivers.Through the proposed control circuit,receivers with different loads can allocate appropriate power according to its power demand,the transmitter power and system efficiency do not vary with the change of the number of receivers.Finally,this control circuit is validated using a 130-kHz WPT system with three receivers whose power received is 3:10:12,and the overall system efficiency can reach as high as 55.5%.
