In this study,we meticulously designed a layered carbon-based catalytic material to induce the degradation of a series of organic pollutants by activating peroxymonosulfate(PMS) in the PMS-based advanced oxidation pro...In this study,we meticulously designed a layered carbon-based catalytic material to induce the degradation of a series of organic pollutants by activating peroxymonosulfate(PMS) in the PMS-based advanced oxidation processes(AOPs).Results indicated that the silicon and oxygen elements from the montmorillonite were incorporated into the catalyst matrix to form the Si-O-C structure.It was notable that the layered carbonaceous material with Si-O-C structure exhibited an outstanding catalytic effect on the synthesized layered catalytic material array,achieving over 90 % removal rate of most pollutants within 60 min.It was notable that the layered carbonaceous material with Si-O-C structure exhibited an outstanding catalytic effect on the synthesized layered catalytic material array.The salt bridge system confirmed that pollutants can provide electrons to the Si-O-C/PMS system,and we verified that the electron transfer process(ETP) mechanism was the main pathway for the degradation of pollutants in the Si-O-C/PMS system via the open-circuit potential analysis.In combination with the structural properties of different pollutants,we discovered that electron-donating pollutants can supply more electrons to the Si-O-C/PMS system,thereby enhancing the ETP process.The findings of this study are anticipated to advance the development and practical application of layered carbonaceous materials-based catalysts and support the design and implementation of nanoconfined catalysts in the field of AOPs.展开更多
Transferring patients with critical illnesses from general wards to intensive care units (ICUs) is a crucial and time-sensitive process. This article presents strategies for improving the efficiency of patient transfe...Transferring patients with critical illnesses from general wards to intensive care units (ICUs) is a crucial and time-sensitive process. This article presents strategies for improving the efficiency of patient transfers, particularly in hospitals where intensive care units are located in buildings separate from general wards. Patient transfers comprise several steps: physicians issue orders, relatives are notified, equipment is prepared, and medical staff coordinate. We identified three factors that influence transfer time: preparation time for bed transfer, time required for shift handovers, and time required for between-ward patient movement. Unfamiliarity with transfer routes and long elevator wait times were factors that also influenced transfer time. The following strategies were proposed: develop a standardized material checklist, design key notes for patient transfers, and optimize transfer routes. These strategies reduced transfer times by 40% to 43%. This study demonstrates that by addressing logistical challenges and streamlining relevant procedures, hospitals can enhance safety and quality of care during patient transfers.展开更多
Improving the seepage of leaching solution in the ore body and strengthening the mass transfer process of rare earth ions during in-situ leaching are two critical methods to improve the leaching efficiency of rare ear...Improving the seepage of leaching solution in the ore body and strengthening the mass transfer process of rare earth ions during in-situ leaching are two critical methods to improve the leaching efficiency of rare earth.In this study,2 wt%MgSO_(4)solution was used for the indoor simulated column leaching experiment on rare earth samples and an electric field was applied at both ends of the samples.Then the effects of different intensities,initial application time and duration of the electric field on the rare earth leaching system and its mechanism were investigated.The results show that compared with the single MgSO_(4)solution leaching,applying an electric field with a strength of 6 V/cm can save the leaching time of 30 min and increase the flow velocity of the rare earth leachate by 26.98%.Under the optimal conditions of applying an electric field with a strength of 6 V/cm for 20 min to the leaching system after10 min of the rare earth leachate flowing out,the leaching efficiency of sample increases from 81.20% to 86.05% with the increase of 4.85%.The mechanism analysis shows that when a direct current electric field is applied to the rare earth leaching system,rare earth ions rapidly change from disorderly movement with the seepage into faster and directional movement.In addition,the seepage of the leaching solution is also improved due to the increase of the cross-sectional area of the seepage channel,the polarized water molecules migrate directionally by force from the negative pole,and the movement of the hydrogen is generated by the electrolytic water.More impo rtantly,based on the principle of in-situ leaching process,the layout of injection holes and deflector holes in this process provides a natural site for the electrode layout of the electric field.With the simple equipme nt and the ope ration,the rare earth leaching process with the applied electric field has high feasibility in industrial application.展开更多
A 3-D mathematical model considering turbulence phenomena has been established based on a computational fluid dynamics technique, so called 3-D SOLA-VOF (Solution Algorithm-Volume of Fluid), to simulate the fluid flow...A 3-D mathematical model considering turbulence phenomena has been established based on a computational fluid dynamics technique, so called 3-D SOLA-VOF (Solution Algorithm-Volume of Fluid), to simulate the fluid flow of mold filling process of die casting. In addition, the mathematical model for simulating the heat transfer in die casting process has also been established. The computation program has been developed by the authors with the finite difference method (FDM) recently. As verification, the mold filling process of a S-shaped die casting has been simulated and the simulation results coincide with that of the benchmark test. Finally, as a practical application, the gating design of a motorcycle component was modified by the mold filling simulation and the dies design of another motorcycle component was optimized by the heat transfer simulation. All the optimized designs were verified by the production practice.展开更多
Although different NbO_(x) units are present in Nb_(2)O_(5)‐based catalysts,the correlations between these structures and activity remain unclear,which considerably hinders the further development of Nb_(2)O_(5) phot...Although different NbO_(x) units are present in Nb_(2)O_(5)‐based catalysts,the correlations between these structures and activity remain unclear,which considerably hinders the further development of Nb_(2)O_(5) photocatalysis.Herein,we utilized N‐hydroxyphthalimide(NHPI)as the probe molecule to distinguish the role of different NbO_(x) units in the activation of C–H bond under visible light irradia‐tion.With the addition of NHPI,Nb_(2)O_(5) catalysts with highly disordered NbO_(6) units exhibited higher activities than that with slightly disordered NbO_(6) units(419‒495 vs.82μmol·g^(-1)·h^(-1))in photocata‐lytic selective oxidation of ethylbenzene.Revealed by Raman spectra,electron paramagnetic reso‐nance spectra,and transmission‐electron‐microscopy images,highly disordered NbO_(6) units were confirmed to act as the active sites for the transfer of photogenerated electrons from NHPI,pro‐moting the generation of phthalimide‐N‐oxyl(PINO)radicals for the enhanced conversion of ethylbenzene under visible light irradiation.This study provides guidance on the role of local NbO_(x) units in Nb_(2)O_(5) photocatalysis.展开更多
Nonylphenol(NP)residues,as a typical endocrine disrupting chemical(EDC),frequently exist in sewage,surface water,groundwater and even drinking water,which poses a serious threat to human health due to its bioaccumulat...Nonylphenol(NP)residues,as a typical endocrine disrupting chemical(EDC),frequently exist in sewage,surface water,groundwater and even drinking water,which poses a serious threat to human health due to its bioaccumulation.In order to remove NP,a series of MIL-100(Fe)/Zn Fe_(2)O_(4)/flake-like porous carbon nitride(MIL/ZC)was synthesized through in-situ synthesis at room temperature.High performance of ternary MIL/ZC is used to degrade NP under visible light irradiation.The results show that 30MIL/ZC2(20 wt.%Zn Fe_(2)O_(4))ternary composite had the best photocatalytic activity(99.84%)when the dosage was 30 mg.Further mechanism analysis shows that the excellent photocatalytic activity of 30MIL/ZC2could be ascribed to the double charge transfer process between flake-like porous carbon nitride(PCN)and other catalysts in the ternary heterojunction,and the separation of photogenerated electron-hole pairs was more effective.In addition,the 30MIL/ZC2 also showed high stability after five cycles of the photodegradation reaction.Furthermore,the active substance(·O_(2)^(-))was considered to be the main active substance in the NP degradation process.Based on the research results,the possible photocatalytic reaction mechanism of 30MIL/ZC2ternary composite was proposed and discussed in detail.展开更多
Gas hydrates formation and dissociation processes inside porous media are always accompanied by water transfer behavior,which is similar to the water behavior of ice freezing and thawing processes.These processes have...Gas hydrates formation and dissociation processes inside porous media are always accompanied by water transfer behavior,which is similar to the water behavior of ice freezing and thawing processes.These processes have been studied by many researchers,but all the studies are so far on the water transfer characteristics outside porous media and the water transfer characteristics inside porous media have been little known.In this study,in order to study the water transfer characteristics inside porous media during methane hydrate formation and dissociation processes,a novel apparatus with three pF-meter sensors which can detect water content changes inside porous media was applied.It was experimentally observed that methane hydrate formation processes were accompanied by water transfer from bottom to top inside porous media,however,the water behavior during hydrate dissociation processes was abnormal,for which more studies are needed to find out the real reason in our future work.展开更多
The objective of this study is to predict grain size and heat transfer coefficient at the metal-die interface during high pressure die casting process and solidification of the magnesium alloy AM60. Multiple runs of t...The objective of this study is to predict grain size and heat transfer coefficient at the metal-die interface during high pressure die casting process and solidification of the magnesium alloy AM60. Multiple runs of the commercial casting simulation package, ProCASTTM, were used to model the mold filling and solidification events employing a range of interfacial heat transfer coefficient values. The simulation results were used to estimate the centerline cooling curve at various locations through the casting. The centerline cooling curves, together with the die temperature and the thermodynamic properties of the alloy, were then used as inputs to compute the solution to the Stefan problem of a moving phase boundary, thereby providing the through-thickness cooling curves at each chosen location of the casting, Finally, the local cooling rate was used to calculate the resulting grain size via previously established relationships. The effects of die temperature, filling time and heat transfer coefficient on the grain structure in skin region and core region were quantitatively characterized. It was observed that the grain size of skin region strongly depends on above three factors whereas the grain size of core region shows dependence on the interracial heat transfer coefficient and thickness of the samples. The grain size distribution from surface to center was estimated from the relationship between grain size and the predicted cooling rate. The prediction of grain size matches well with experimental results. A comparison of the predicted and experimentally determined grain size profiles enables the determination of the apparent interracial heat transfer coefficient for different locations.展开更多
A pioneering glass-compatible transparent temperature alarm system self-powered by luminescent solar concentrators(LSCs) is reported.Single green-emitted organic manganese halides(OMHs) of PEA_(2)MnBr_(2)I_(2),which h...A pioneering glass-compatible transparent temperature alarm system self-powered by luminescent solar concentrators(LSCs) is reported.Single green-emitted organic manganese halides(OMHs) of PEA_(2)MnBr_(2)I_(2),which has a unique temperature-dependent backward energy transfer process from selftrapped state to^(4)T_(1)energy level of Mn,is used for triggering the temperature alarm.The LSC with redemitted CsPbI_(3)perovskite-polymer composite films on the glass substrate is used for power supply.The spectrally separated nature between the green-emitted OMHs for temperature alarm and red-emitted CsPbI3in LSC for power supply allows for probing the signal light of temperature-responsive OMHs without the interference of LSCs,making it possible to calibrate the temperature visually just by a self-powered brightness detection circuit with LED indicators.Taking advantage of LSC without hot spot effects plaguing the solar cells,as-prepared temperature alarm system can operate well on both sunny and cloudy day.展开更多
Knowledge transfer is widely emphasized as a strategic issue for firm competition. A model for intra-firm horizontal knowledge transfer is proposed to model horizontal knowledge transfer to solve some demerits in curr...Knowledge transfer is widely emphasized as a strategic issue for firm competition. A model for intra-firm horizontal knowledge transfer is proposed to model horizontal knowledge transfer to solve some demerits in current knowledge transfer researches. The concept model of intra-firm horizontal knowledge transfer was described and a framework was provided to define the main components of the transfer process. Horizontal knowledge transfer is that knowledge is transferred from the source to the same hierarchical level recipients as the target. Horizontal knowledge transfer constitutes a strategic area of knowledge management research. However, little is known about the circumstances under which one particular mechanism is the most appropriate. To address these issues, some significant conclusions are drawn concerning knowledge transfer mechanisms in a real-world setting.展开更多
According to heat transfer principle and the process of solving engineering problems by finite element method, examples were given to demonstrate how finite element analysis can be used to describe transient heat tran...According to heat transfer principle and the process of solving engineering problems by finite element method, examples were given to demonstrate how finite element analysis can be used to describe transient heat transfer through fabrics. Details were given to describe how conduction and convection affect temperature distribution and heat loss during heat transfer processes by taking advantage of the quick calculation of FEA software MSC.Marc. Experimental results show good agreement with the theoretical results.展开更多
In this work, the in-situ TiC panicles reinforced composite coating was prepared by plasma transferred arc process on the surface of Q235 steel. Microstructures, phase composition and wear property of the coating were...In this work, the in-situ TiC panicles reinforced composite coating was prepared by plasma transferred arc process on the surface of Q235 steel. Microstructures, phase composition and wear property of the coating were investigated. The results showed that the composite coating consisted mainly of T-Ni, TiC, Cr23C6, Cr7C3, Ni3Si, CrB, Cr5B3 and FeNi3 phases, and was characterized by fine TiC panicles embedded in Ni matrix. The wear resistance of composite coating was significantly improved compared with that of the steel substrate. The wear volume loss of the substrate was 443 mm3, which was about 9 times as that of in-situ TiC particles reinforced composite coating （49 mm3 ）. It is mainly attributed to the presence of chromium carbide particles and in-situ TiC particles and their favorable combination with Ni matrix.展开更多
Based on investigation data of PHC content in Jiaozhou Bay,China from 1979 to 1983,the seasonal variations of PHC content and monthly changes of precipitation in Jiaozhou Bay were analyzed. The results showed that see...Based on investigation data of PHC content in Jiaozhou Bay,China from 1979 to 1983,the seasonal variations of PHC content and monthly changes of precipitation in Jiaozhou Bay were analyzed. The results showed that seen from the spatial and temporal distribution,the seasonal variation of PHC content in the surface water of Jiaozhou Bay was based on the flow of the rivers as well as human activity,so PHC content in the rivers depended on the flow of the rivers and human activity,and the peaks and valleys of PHC content appeared in various seasons. The seasonal variation of PHC content in the surface water of Jiaozhou Bay depended on its land transfer process. The land transfer process was composed of use of PHC by mankind,deposition of PHC in soil and on the earth＇s surface,and transportation of PHC to offshore waters of sea by rivers and surface runoff. PHC content depended on mankind during the process from being used to entering soil and on precipitation during the process of being transported from soil to ocean.展开更多
Ultra-thin crystalline silicon stands as a cornerstone material in the foundation of modern micro and nano electronics.Despite the proliferation of various materials including oxide-based,polymer-based,carbon-based,an...Ultra-thin crystalline silicon stands as a cornerstone material in the foundation of modern micro and nano electronics.Despite the proliferation of various materials including oxide-based,polymer-based,carbon-based,and two-dimensional(2D)materials,crystal silicon continues to maintain its stronghold,owing to its superior functionality,scalability,stability,reliability,and uniformity.Nonetheless,the inherent rigidity of the bulk silicon leads to incompatibility with soft tissues,hindering the utilization amid biomedical applications.Because of such issues,decades of research have enabled successful utilization of various techniques to precisely control the thickness and morphology of silicon layers at the scale of several nanometres.This review provides a comprehensive exploration on the features of ultra-thin single crystalline silicon as a semiconducting material,and its role especially among the frontier of advanced bioelectronics.Key processes that enable the transition of rigid silicon to flexible form factors are exhibited,in accordance with their chronological sequence.The inspected stages span both prior and subsequent to transferring the silicon membrane,categorized respectively as on-wafer manufacturing and rigid-to-soft integration.Extensive guidelines to unlock the full potential of flexible electronics are provided through ordered analysis of each manufacturing procedure,the latest findings of biomedical applications,along with practical perspectives for researchers and manufacturers.展开更多
The employment of single atom catalysts(SACs)remarkably increases atomic utilization and catalytic efficiency in various electrochemical processes,especially when coupled with metal clusters/nanoparticles.However,the ...The employment of single atom catalysts(SACs)remarkably increases atomic utilization and catalytic efficiency in various electrochemical processes,especially when coupled with metal clusters/nanoparticles.However,the synergistic effects mainly focus on the energetics of key intermediates during the electrocatalysis,while the properties of electrode surface and electric-double-layer(EDL)structure are largely overlooked.Herein,we report the synthesis of Ru nanoparticles integrated with neighboring Ru single atoms on nitrogen doped carbon(Ru1,n/NC)as efficient catalysts toward hydrogen oxidation reaction(HOR)under alkaline electrolytes.Electrochemical data,in situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy,and density functional theory calculations reveal that the positively charged Ru single atoms could lead to the dynamically regulated proportion of strongly hydrogen-bonded interfacial water structure with O-down conformation and optimized connectivity of the hydrogen-bond network in the EDL region,which contribute to the accelerated diffusion of hydroxide ions to the electrified interfaces.Consequently,the obtained Ru1,n/NC catalyst displays remarkable HOR performance with the mass activity of 1.15 mAμgPGM^(-1) under alkaline electrolyte.This work demonstrates the promise of single atoms for interfacial water environment adjustment and mass transfer process modulation,providing new insights into rational design of highly-effective SAC-based electrocatalysts.展开更多
The spectroscopic properties of a series of Dy^(3+)single-doped and Dy^(3+)/Nd^(3+),Dy^(3+)/Tb^(3+),and Dy^(3+)/Tm^(3+)co-doped YAlO_(3)(yttrium aluminum perovskite,YAP)phosphors were investigated and compared through...The spectroscopic properties of a series of Dy^(3+)single-doped and Dy^(3+)/Nd^(3+),Dy^(3+)/Tb^(3+),and Dy^(3+)/Tm^(3+)co-doped YAlO_(3)(yttrium aluminum perovskite,YAP)phosphors were investigated and compared through the measurements of optical absorption,emission spectra,and fluorescence decay curves.For the Dy^(3+)ion single-doped samples,the intensity of each absorption band increases with an increment in Dy^(3+)ion doping concentration,and the identified strong absorption peak at 447 nm indicates that Dy^(3+):YAP phosphors are suitable to be pumped by a blue laser diode(LD).For all co-doped samples,absorption peaks of Dy^(3+)ion along with some of the absorption bands of Nd^(3+),Tb^(3+),and Tm^(3+)ions are observed.Under 351 and 447 nm excitation,a prominent emission peak at 572 nm was obtained in all the samples,corresponding to Dy^(3+):^(4)F_(9/2)→^(6)H_(13/2)transition.Here,2 at%Dy^(3+):YAP phosphor exhibits the highest yellow emission intensity under 447 nm pumping.Among the three kinds of Dy^(3+)co-doped phosphors,Dy^(3+)/Tb^(3+):YAP phosphor possesses the dominant yellow emission.The fluorescence decay curves show exponential behaviour and are fitted well.The Commission International de L’Eclairage(CIE)chromaticity coordinates were calculated following the respective emission spectra,and it is found that all the coordinates locate in the yellow region.The energy transfer(ET)processes were investigated and the concentration quenching mechanism was discussed.The obtained results suggest that Dy^(3+)-activated YAP phosphors are good candidates for yellow LED applications.展开更多
A T-Q diagram based on entransy theory is applied to graphically and quantitatively describe the irreversibility of the heat transfer processes.The hot and cold composite curves can be obtained in the T-Q diagram.The ...A T-Q diagram based on entransy theory is applied to graphically and quantitatively describe the irreversibility of the heat transfer processes.The hot and cold composite curves can be obtained in the T-Q diagram.The entransy recovery and entransy dissipation that are affected by temperature differences can be obtained through the shaded area under the composite curves.The method for setting the energy target of the HENs in T-Q diagram based on entransy theory is proposed.A case study of the diesel oil hydrogenation unit is used to illustrate the application of the method.The results show that three different heat transfer temperature differences is 10 K,15 K and 20 K,and the entransy recovery is 5.498×10~7k W·K,5.377×10~7k W·K,5.257×10~7k W·K,respectively.And the entransy transfer efficiency is 92.29%,91.63%,90.99%.Thus,the energy-saving potential of the HENs is obtained by setting the energy target based on the entransy transfer efficiency.展开更多
In order to intensify the leaching process of rare earth（RE） and reduce the impurities in the leachate, ammonium chloride（NH4Cl） and ammonium nitrate（NH4NO3） were mixed as a compound leaching agent to treat the ...In order to intensify the leaching process of rare earth（RE） and reduce the impurities in the leachate, ammonium chloride（NH4Cl） and ammonium nitrate（NH4NO3） were mixed as a compound leaching agent to treat the weathered crust elution-deposited RE ore. Effects of molar ratio of NH~＋_4Cl and NH_4NO_3, ammonium（NH_4） concentration, leaching agent pH and flow rate on the leaching process of RE were studied and evaluated by the chromatographic plate theory. Leaching process of the main impurity aluminium（Al） was also discussed in detail. Results showed that a higher initial ammonium concentration in a certain range could enhance the mass transfer process of RE and Al by providing a driving force to overcome the resistance of diffusion. pH almost had no effects on the mass transfer efficiency of RE and Al in the range of 4 to 8. The relationship between the flow rate and height equivalent to a theoretical plate（HETP） could fit well with the Van Deemter equation, and the flow rate at the lowest HETP was determined. The optimum conditions of column leaching for RE and Al were 1：1（molar ratio） of NH_4Cl and NH_4NO_3, 0.2 mol/L of ammonium concentration, pH 4–8 of leaching agent and 0.5 mL /min of flow rate. Under this condition, the mass transfer efficiency of RE was improved, but no change was observed for Al compared with the most widely used ammonium sulfate. Moreover, the significant difference value（around 20 mL） of retention volume at the peak concentration between RE and Al provided a possibility for their separation. It suggested the potential application of the novel compound leaching agent（NH_4Cl/NH_4NO_3）. It was found that the relative concentration of RE in the leachate could be easily obtained by monitoring the pH of leachate.展开更多
Iron-based single-atom catalysts with nitrogen-doped carbon as support(Fe-SA/NPC)are considered effective alternatives to replace Pt-group metals for scalable application in fuel cells.However,synthesizing high-loadin...Iron-based single-atom catalysts with nitrogen-doped carbon as support(Fe-SA/NPC)are considered effective alternatives to replace Pt-group metals for scalable application in fuel cells.However,synthesizing high-loading Fe-SA catalysts by a simple procedure remains challenging.Herein,we report a high-loading(7.5 wt%)Fe-SA/NPC catalyst prepared by carbon-assisted pyrolysis of metal complexes.Both the nitrogen-doped porous carbon(NPC)support with high specific surface area and ο-phenylenediamine(o-PD)play key roles role in the preparation of high-loading Fe-SA/NPC catalysts.The results of X-ray photoelectron spectroscopy,high-angle annular dark-field scanning transmission electron microscopy,and X-ray absorption fine structure spectroscopy experiments show that the Fe atoms are anchored on the carbon carriers in a single-atom site configuration and coordinated with four of the doped nitrogen atoms of the carbon substrates(Fe-N_(4)).The activities of the Fe-SA/NPC catalysts in the oxygen reduction reaction increased with increasing iron loading.The optimized 250Fe-SA/NPC-800 catalyst exhibited an onset potential 0.97 V of and a half-wave potential of 0.85 V.Our study provides a simple approach for the large-scale synthesis of high-loading single-atom catalysts.展开更多
The photo-induced electron transfer reactions of anthracene with N,N -diethylaniline(DEA) and phenothiazine(PTZ) occur in the membrane phase of a Triton X-100/ n -C 10 H 21 OH(1-decanol)/H 2O microemulsion. DEA and PT...The photo-induced electron transfer reactions of anthracene with N,N -diethylaniline(DEA) and phenothiazine(PTZ) occur in the membrane phase of a Triton X-100/ n -C 10 H 21 OH(1-decanol)/H 2O microemulsion. DEA and PTZ exist in the membrane phase of the microemulsion. Anthracene exists in the oil continuous phase of the W/O microemulsion and in the oil core and membrane phase of the O/W microemulsion.展开更多
基金supported by National Natural Science Foundation of China (Nos.52170086,22476116,52074176)Natural Science Foundation of Shandong Province (Nos.ZR2021ME013,ZR2024ME156,ZR2022QB250)。
文摘In this study,we meticulously designed a layered carbon-based catalytic material to induce the degradation of a series of organic pollutants by activating peroxymonosulfate(PMS) in the PMS-based advanced oxidation processes(AOPs).Results indicated that the silicon and oxygen elements from the montmorillonite were incorporated into the catalyst matrix to form the Si-O-C structure.It was notable that the layered carbonaceous material with Si-O-C structure exhibited an outstanding catalytic effect on the synthesized layered catalytic material array,achieving over 90 % removal rate of most pollutants within 60 min.It was notable that the layered carbonaceous material with Si-O-C structure exhibited an outstanding catalytic effect on the synthesized layered catalytic material array.The salt bridge system confirmed that pollutants can provide electrons to the Si-O-C/PMS system,and we verified that the electron transfer process(ETP) mechanism was the main pathway for the degradation of pollutants in the Si-O-C/PMS system via the open-circuit potential analysis.In combination with the structural properties of different pollutants,we discovered that electron-donating pollutants can supply more electrons to the Si-O-C/PMS system,thereby enhancing the ETP process.The findings of this study are anticipated to advance the development and practical application of layered carbonaceous materials-based catalysts and support the design and implementation of nanoconfined catalysts in the field of AOPs.
文摘Transferring patients with critical illnesses from general wards to intensive care units (ICUs) is a crucial and time-sensitive process. This article presents strategies for improving the efficiency of patient transfers, particularly in hospitals where intensive care units are located in buildings separate from general wards. Patient transfers comprise several steps: physicians issue orders, relatives are notified, equipment is prepared, and medical staff coordinate. We identified three factors that influence transfer time: preparation time for bed transfer, time required for shift handovers, and time required for between-ward patient movement. Unfamiliarity with transfer routes and long elevator wait times were factors that also influenced transfer time. The following strategies were proposed: develop a standardized material checklist, design key notes for patient transfers, and optimize transfer routes. These strategies reduced transfer times by 40% to 43%. This study demonstrates that by addressing logistical challenges and streamlining relevant procedures, hospitals can enhance safety and quality of care during patient transfers.
基金Projects supported by the National Key R&D Program of China(2020YFC1909000)Self-deployed Projects of Ganjiang Innovation Academy,Chinese Academy of Sciences(E055A001,E055A002)+1 种基金Key Research Programs of the Chinese Academy of Sciences(ZDRW-CN-2021-3)National Natural Science Foundation of China(52174113,51874148)。
文摘Improving the seepage of leaching solution in the ore body and strengthening the mass transfer process of rare earth ions during in-situ leaching are two critical methods to improve the leaching efficiency of rare earth.In this study,2 wt%MgSO_(4)solution was used for the indoor simulated column leaching experiment on rare earth samples and an electric field was applied at both ends of the samples.Then the effects of different intensities,initial application time and duration of the electric field on the rare earth leaching system and its mechanism were investigated.The results show that compared with the single MgSO_(4)solution leaching,applying an electric field with a strength of 6 V/cm can save the leaching time of 30 min and increase the flow velocity of the rare earth leachate by 26.98%.Under the optimal conditions of applying an electric field with a strength of 6 V/cm for 20 min to the leaching system after10 min of the rare earth leachate flowing out,the leaching efficiency of sample increases from 81.20% to 86.05% with the increase of 4.85%.The mechanism analysis shows that when a direct current electric field is applied to the rare earth leaching system,rare earth ions rapidly change from disorderly movement with the seepage into faster and directional movement.In addition,the seepage of the leaching solution is also improved due to the increase of the cross-sectional area of the seepage channel,the polarized water molecules migrate directionally by force from the negative pole,and the movement of the hydrogen is generated by the electrolytic water.More impo rtantly,based on the principle of in-situ leaching process,the layout of injection holes and deflector holes in this process provides a natural site for the electrode layout of the electric field.With the simple equipme nt and the ope ration,the rare earth leaching process with the applied electric field has high feasibility in industrial application.
文摘A 3-D mathematical model considering turbulence phenomena has been established based on a computational fluid dynamics technique, so called 3-D SOLA-VOF (Solution Algorithm-Volume of Fluid), to simulate the fluid flow of mold filling process of die casting. In addition, the mathematical model for simulating the heat transfer in die casting process has also been established. The computation program has been developed by the authors with the finite difference method (FDM) recently. As verification, the mold filling process of a S-shaped die casting has been simulated and the simulation results coincide with that of the benchmark test. Finally, as a practical application, the gating design of a motorcycle component was modified by the mold filling simulation and the dies design of another motorcycle component was optimized by the heat transfer simulation. All the optimized designs were verified by the production practice.
文摘Although different NbO_(x) units are present in Nb_(2)O_(5)‐based catalysts,the correlations between these structures and activity remain unclear,which considerably hinders the further development of Nb_(2)O_(5) photocatalysis.Herein,we utilized N‐hydroxyphthalimide(NHPI)as the probe molecule to distinguish the role of different NbO_(x) units in the activation of C–H bond under visible light irradia‐tion.With the addition of NHPI,Nb_(2)O_(5) catalysts with highly disordered NbO_(6) units exhibited higher activities than that with slightly disordered NbO_(6) units(419‒495 vs.82μmol·g^(-1)·h^(-1))in photocata‐lytic selective oxidation of ethylbenzene.Revealed by Raman spectra,electron paramagnetic reso‐nance spectra,and transmission‐electron‐microscopy images,highly disordered NbO_(6) units were confirmed to act as the active sites for the transfer of photogenerated electrons from NHPI,pro‐moting the generation of phthalimide‐N‐oxyl(PINO)radicals for the enhanced conversion of ethylbenzene under visible light irradiation.This study provides guidance on the role of local NbO_(x) units in Nb_(2)O_(5) photocatalysis.
基金supported by the National Natural Science Foundation of China(No.21477050)the International Scientific and Technological Cooperation in Changzhou(No.CZ20140017)+2 种基金Postgraduate Research Innovation Project of Jiangsu Province(Nos.KYCX20_2561,KYCX20_2598)the Jiangsu Planned Projects for Postdoctoral Research Funds(No.2019K112)the Jiangsu Province subsidizes the recruitment of postdoctoral personnel(No.2019Z143)。
文摘Nonylphenol(NP)residues,as a typical endocrine disrupting chemical(EDC),frequently exist in sewage,surface water,groundwater and even drinking water,which poses a serious threat to human health due to its bioaccumulation.In order to remove NP,a series of MIL-100(Fe)/Zn Fe_(2)O_(4)/flake-like porous carbon nitride(MIL/ZC)was synthesized through in-situ synthesis at room temperature.High performance of ternary MIL/ZC is used to degrade NP under visible light irradiation.The results show that 30MIL/ZC2(20 wt.%Zn Fe_(2)O_(4))ternary composite had the best photocatalytic activity(99.84%)when the dosage was 30 mg.Further mechanism analysis shows that the excellent photocatalytic activity of 30MIL/ZC2could be ascribed to the double charge transfer process between flake-like porous carbon nitride(PCN)and other catalysts in the ternary heterojunction,and the separation of photogenerated electron-hole pairs was more effective.In addition,the 30MIL/ZC2 also showed high stability after five cycles of the photodegradation reaction.Furthermore,the active substance(·O_(2)^(-))was considered to be the main active substance in the NP degradation process.Based on the research results,the possible photocatalytic reaction mechanism of 30MIL/ZC2ternary composite was proposed and discussed in detail.
基金financially supported by the CAS Knowledge Innovation Key Project(Grant No.KZCX2-YW-330)the National Science Fund FosteringTalents in Basic Research to Glaciology and Geocryology(Grant No.J0630966)
文摘Gas hydrates formation and dissociation processes inside porous media are always accompanied by water transfer behavior,which is similar to the water behavior of ice freezing and thawing processes.These processes have been studied by many researchers,but all the studies are so far on the water transfer characteristics outside porous media and the water transfer characteristics inside porous media have been little known.In this study,in order to study the water transfer characteristics inside porous media during methane hydrate formation and dissociation processes,a novel apparatus with three pF-meter sensors which can detect water content changes inside porous media was applied.It was experimentally observed that methane hydrate formation processes were accompanied by water transfer from bottom to top inside porous media,however,the water behavior during hydrate dissociation processes was abnormal,for which more studies are needed to find out the real reason in our future work.
基金jointly supported by Canadian Network for Research and Innovation in Machining TechnologyNatural Sciences and Engineering Research Council of Canada-Automotive Partnership Canada programNRCan’s Office of Energy R&D through the Program on Energy R&D
文摘The objective of this study is to predict grain size and heat transfer coefficient at the metal-die interface during high pressure die casting process and solidification of the magnesium alloy AM60. Multiple runs of the commercial casting simulation package, ProCASTTM, were used to model the mold filling and solidification events employing a range of interfacial heat transfer coefficient values. The simulation results were used to estimate the centerline cooling curve at various locations through the casting. The centerline cooling curves, together with the die temperature and the thermodynamic properties of the alloy, were then used as inputs to compute the solution to the Stefan problem of a moving phase boundary, thereby providing the through-thickness cooling curves at each chosen location of the casting, Finally, the local cooling rate was used to calculate the resulting grain size via previously established relationships. The effects of die temperature, filling time and heat transfer coefficient on the grain structure in skin region and core region were quantitatively characterized. It was observed that the grain size of skin region strongly depends on above three factors whereas the grain size of core region shows dependence on the interracial heat transfer coefficient and thickness of the samples. The grain size distribution from surface to center was estimated from the relationship between grain size and the predicted cooling rate. The prediction of grain size matches well with experimental results. A comparison of the predicted and experimentally determined grain size profiles enables the determination of the apparent interracial heat transfer coefficient for different locations.
基金supported by the Natural Science Foundation of China(22075043,21875034,61704093)。
文摘A pioneering glass-compatible transparent temperature alarm system self-powered by luminescent solar concentrators(LSCs) is reported.Single green-emitted organic manganese halides(OMHs) of PEA_(2)MnBr_(2)I_(2),which has a unique temperature-dependent backward energy transfer process from selftrapped state to^(4)T_(1)energy level of Mn,is used for triggering the temperature alarm.The LSC with redemitted CsPbI_(3)perovskite-polymer composite films on the glass substrate is used for power supply.The spectrally separated nature between the green-emitted OMHs for temperature alarm and red-emitted CsPbI3in LSC for power supply allows for probing the signal light of temperature-responsive OMHs without the interference of LSCs,making it possible to calibrate the temperature visually just by a self-powered brightness detection circuit with LED indicators.Taking advantage of LSC without hot spot effects plaguing the solar cells,as-prepared temperature alarm system can operate well on both sunny and cloudy day.
文摘Knowledge transfer is widely emphasized as a strategic issue for firm competition. A model for intra-firm horizontal knowledge transfer is proposed to model horizontal knowledge transfer to solve some demerits in current knowledge transfer researches. The concept model of intra-firm horizontal knowledge transfer was described and a framework was provided to define the main components of the transfer process. Horizontal knowledge transfer is that knowledge is transferred from the source to the same hierarchical level recipients as the target. Horizontal knowledge transfer constitutes a strategic area of knowledge management research. However, little is known about the circumstances under which one particular mechanism is the most appropriate. To address these issues, some significant conclusions are drawn concerning knowledge transfer mechanisms in a real-world setting.
文摘According to heat transfer principle and the process of solving engineering problems by finite element method, examples were given to demonstrate how finite element analysis can be used to describe transient heat transfer through fabrics. Details were given to describe how conduction and convection affect temperature distribution and heat loss during heat transfer processes by taking advantage of the quick calculation of FEA software MSC.Marc. Experimental results show good agreement with the theoretical results.
文摘In this work, the in-situ TiC panicles reinforced composite coating was prepared by plasma transferred arc process on the surface of Q235 steel. Microstructures, phase composition and wear property of the coating were investigated. The results showed that the composite coating consisted mainly of T-Ni, TiC, Cr23C6, Cr7C3, Ni3Si, CrB, Cr5B3 and FeNi3 phases, and was characterized by fine TiC panicles embedded in Ni matrix. The wear resistance of composite coating was significantly improved compared with that of the steel substrate. The wear volume loss of the substrate was 443 mm3, which was about 9 times as that of in-situ TiC particles reinforced composite coating （49 mm3 ）. It is mainly attributed to the presence of chromium carbide particles and in-situ TiC particles and their favorable combination with Ni matrix.
文摘Based on investigation data of PHC content in Jiaozhou Bay,China from 1979 to 1983,the seasonal variations of PHC content and monthly changes of precipitation in Jiaozhou Bay were analyzed. The results showed that seen from the spatial and temporal distribution,the seasonal variation of PHC content in the surface water of Jiaozhou Bay was based on the flow of the rivers as well as human activity,so PHC content in the rivers depended on the flow of the rivers and human activity,and the peaks and valleys of PHC content appeared in various seasons. The seasonal variation of PHC content in the surface water of Jiaozhou Bay depended on its land transfer process. The land transfer process was composed of use of PHC by mankind,deposition of PHC in soil and on the earth＇s surface,and transportation of PHC to offshore waters of sea by rivers and surface runoff. PHC content depended on mankind during the process from being used to entering soil and on precipitation during the process of being transported from soil to ocean.
基金support received from National Research Foundation of Korea (NRF) Grant funded by the Korea government (MSIT)(RS-2024-00353768)the National Research Foundation of Korea (NRF) Grant funded by the Korea government (MSIT)(RS-2025-02217919)+1 种基金funded by the Yonsei Fellowshipfunded by Lee Youn Jae and the KIST Institutional Program Project No.2E31603-22-140 (KJY).
文摘Ultra-thin crystalline silicon stands as a cornerstone material in the foundation of modern micro and nano electronics.Despite the proliferation of various materials including oxide-based,polymer-based,carbon-based,and two-dimensional(2D)materials,crystal silicon continues to maintain its stronghold,owing to its superior functionality,scalability,stability,reliability,and uniformity.Nonetheless,the inherent rigidity of the bulk silicon leads to incompatibility with soft tissues,hindering the utilization amid biomedical applications.Because of such issues,decades of research have enabled successful utilization of various techniques to precisely control the thickness and morphology of silicon layers at the scale of several nanometres.This review provides a comprehensive exploration on the features of ultra-thin single crystalline silicon as a semiconducting material,and its role especially among the frontier of advanced bioelectronics.Key processes that enable the transition of rigid silicon to flexible form factors are exhibited,in accordance with their chronological sequence.The inspected stages span both prior and subsequent to transferring the silicon membrane,categorized respectively as on-wafer manufacturing and rigid-to-soft integration.Extensive guidelines to unlock the full potential of flexible electronics are provided through ordered analysis of each manufacturing procedure,the latest findings of biomedical applications,along with practical perspectives for researchers and manufacturers.
文摘The employment of single atom catalysts(SACs)remarkably increases atomic utilization and catalytic efficiency in various electrochemical processes,especially when coupled with metal clusters/nanoparticles.However,the synergistic effects mainly focus on the energetics of key intermediates during the electrocatalysis,while the properties of electrode surface and electric-double-layer(EDL)structure are largely overlooked.Herein,we report the synthesis of Ru nanoparticles integrated with neighboring Ru single atoms on nitrogen doped carbon(Ru1,n/NC)as efficient catalysts toward hydrogen oxidation reaction(HOR)under alkaline electrolytes.Electrochemical data,in situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy,and density functional theory calculations reveal that the positively charged Ru single atoms could lead to the dynamically regulated proportion of strongly hydrogen-bonded interfacial water structure with O-down conformation and optimized connectivity of the hydrogen-bond network in the EDL region,which contribute to the accelerated diffusion of hydroxide ions to the electrified interfaces.Consequently,the obtained Ru1,n/NC catalyst displays remarkable HOR performance with the mass activity of 1.15 mAμgPGM^(-1) under alkaline electrolyte.This work demonstrates the promise of single atoms for interfacial water environment adjustment and mass transfer process modulation,providing new insights into rational design of highly-effective SAC-based electrocatalysts.
基金Projects supported by the National Natural Science Foundation of China(51872286,51832007,51472240,61675204)Science and Technology Plan Leading Project of Fujian Province(2018H0046)+3 种基金State Key Laboratory of Rare Earth Resource Utilization(RERU2018004,Changchun Institute of Applied Chemistry,Chinese Academy of Sciences)the National Key Research and Development Program of China(2016YFB0701002)the fund of the State Key Laboratory of Solidification Processing(SKLSP201908,Northwestern Polytechnical University)Natural Science Foundation of Jiangxi Province(20181BAB211009)。
文摘The spectroscopic properties of a series of Dy^(3+)single-doped and Dy^(3+)/Nd^(3+),Dy^(3+)/Tb^(3+),and Dy^(3+)/Tm^(3+)co-doped YAlO_(3)(yttrium aluminum perovskite,YAP)phosphors were investigated and compared through the measurements of optical absorption,emission spectra,and fluorescence decay curves.For the Dy^(3+)ion single-doped samples,the intensity of each absorption band increases with an increment in Dy^(3+)ion doping concentration,and the identified strong absorption peak at 447 nm indicates that Dy^(3+):YAP phosphors are suitable to be pumped by a blue laser diode(LD).For all co-doped samples,absorption peaks of Dy^(3+)ion along with some of the absorption bands of Nd^(3+),Tb^(3+),and Tm^(3+)ions are observed.Under 351 and 447 nm excitation,a prominent emission peak at 572 nm was obtained in all the samples,corresponding to Dy^(3+):^(4)F_(9/2)→^(6)H_(13/2)transition.Here,2 at%Dy^(3+):YAP phosphor exhibits the highest yellow emission intensity under 447 nm pumping.Among the three kinds of Dy^(3+)co-doped phosphors,Dy^(3+)/Tb^(3+):YAP phosphor possesses the dominant yellow emission.The fluorescence decay curves show exponential behaviour and are fitted well.The Commission International de L’Eclairage(CIE)chromaticity coordinates were calculated following the respective emission spectra,and it is found that all the coordinates locate in the yellow region.The energy transfer(ET)processes were investigated and the concentration quenching mechanism was discussed.The obtained results suggest that Dy^(3+)-activated YAP phosphors are good candidates for yellow LED applications.
基金Supported by the National Natural Science Foundation of China(21406124)
文摘A T-Q diagram based on entransy theory is applied to graphically and quantitatively describe the irreversibility of the heat transfer processes.The hot and cold composite curves can be obtained in the T-Q diagram.The entransy recovery and entransy dissipation that are affected by temperature differences can be obtained through the shaded area under the composite curves.The method for setting the energy target of the HENs in T-Q diagram based on entransy theory is proposed.A case study of the diesel oil hydrogenation unit is used to illustrate the application of the method.The results show that three different heat transfer temperature differences is 10 K,15 K and 20 K,and the entransy recovery is 5.498×10~7k W·K,5.377×10~7k W·K,5.257×10~7k W·K,respectively.And the entransy transfer efficiency is 92.29%,91.63%,90.99%.Thus,the energy-saving potential of the HENs is obtained by setting the energy target based on the entransy transfer efficiency.
基金Project supported by the National Natural Science Foundation of China(51274152 and 41472071)the Program for Excellent Young Scientific and Technological Innovation Team of Hubei Provincial Department of Education,China(T201506)
文摘In order to intensify the leaching process of rare earth（RE） and reduce the impurities in the leachate, ammonium chloride（NH4Cl） and ammonium nitrate（NH4NO3） were mixed as a compound leaching agent to treat the weathered crust elution-deposited RE ore. Effects of molar ratio of NH~＋_4Cl and NH_4NO_3, ammonium（NH_4） concentration, leaching agent pH and flow rate on the leaching process of RE were studied and evaluated by the chromatographic plate theory. Leaching process of the main impurity aluminium（Al） was also discussed in detail. Results showed that a higher initial ammonium concentration in a certain range could enhance the mass transfer process of RE and Al by providing a driving force to overcome the resistance of diffusion. pH almost had no effects on the mass transfer efficiency of RE and Al in the range of 4 to 8. The relationship between the flow rate and height equivalent to a theoretical plate（HETP） could fit well with the Van Deemter equation, and the flow rate at the lowest HETP was determined. The optimum conditions of column leaching for RE and Al were 1：1（molar ratio） of NH_4Cl and NH_4NO_3, 0.2 mol/L of ammonium concentration, pH 4–8 of leaching agent and 0.5 mL /min of flow rate. Under this condition, the mass transfer efficiency of RE was improved, but no change was observed for Al compared with the most widely used ammonium sulfate. Moreover, the significant difference value（around 20 mL） of retention volume at the peak concentration between RE and Al provided a possibility for their separation. It suggested the potential application of the novel compound leaching agent（NH_4Cl/NH_4NO_3）. It was found that the relative concentration of RE in the leachate could be easily obtained by monitoring the pH of leachate.
文摘Iron-based single-atom catalysts with nitrogen-doped carbon as support(Fe-SA/NPC)are considered effective alternatives to replace Pt-group metals for scalable application in fuel cells.However,synthesizing high-loading Fe-SA catalysts by a simple procedure remains challenging.Herein,we report a high-loading(7.5 wt%)Fe-SA/NPC catalyst prepared by carbon-assisted pyrolysis of metal complexes.Both the nitrogen-doped porous carbon(NPC)support with high specific surface area and ο-phenylenediamine(o-PD)play key roles role in the preparation of high-loading Fe-SA/NPC catalysts.The results of X-ray photoelectron spectroscopy,high-angle annular dark-field scanning transmission electron microscopy,and X-ray absorption fine structure spectroscopy experiments show that the Fe atoms are anchored on the carbon carriers in a single-atom site configuration and coordinated with four of the doped nitrogen atoms of the carbon substrates(Fe-N_(4)).The activities of the Fe-SA/NPC catalysts in the oxygen reduction reaction increased with increasing iron loading.The optimized 250Fe-SA/NPC-800 catalyst exhibited an onset potential 0.97 V of and a half-wave potential of 0.85 V.Our study provides a simple approach for the large-scale synthesis of high-loading single-atom catalysts.
基金Supported by the National Natural Science Foundation of China( No.2 0 0 730 38,2 0 2 330 10 )
文摘The photo-induced electron transfer reactions of anthracene with N,N -diethylaniline(DEA) and phenothiazine(PTZ) occur in the membrane phase of a Triton X-100/ n -C 10 H 21 OH(1-decanol)/H 2O microemulsion. DEA and PTZ exist in the membrane phase of the microemulsion. Anthracene exists in the oil continuous phase of the W/O microemulsion and in the oil core and membrane phase of the O/W microemulsion.
