This study uses the International Center for Theoretical Physics(ICTP)Regional Climate Model version 5(RegCM5.0)to investigate the impact of the Fouta Djallon topography on the mean surface climate of West Africa with...This study uses the International Center for Theoretical Physics(ICTP)Regional Climate Model version 5(RegCM5.0)to investigate the impact of the Fouta Djallon topography on the mean surface climate of West Africa with a focus on the June–September(JJAS)season.Two experiments were conducted:a control simulation with current topography(REF)and a sensitivity simulation with flattened terrain(FLAT).Results show that reducing the elevation leads to decreased rainfall and increased temperatures,particularly over the Guinea Coast and the modified topographic region.Rainfall decreases by approximately 4.59%in the Guinea Coast sub-zone,while it slightly increases by about 2.76%in the Sahel.The most significant rainfall reduction,exceeding 20%,occurs over the flattened area.Temperature rises across both regions,with the strongest warming over the Fouta Jallon region.This pattern is likely due to the suppression of orographic uplift,which enhances the southwesterly monsoon flow from the Atlantic Ocean and causes a northward shift of the Intertropical Convergence Zone(ITCZ)into the Sahel.The findings highlight the key role of Fouta Jallon topography on the West African climate system.展开更多
In the arid regions of Northwest China,vegetation cover plays a crucial role in maintaining unique terrestrial ecosystems.Vegetation growth is highly sensitive to variations in topographical factors,and the influence ...In the arid regions of Northwest China,vegetation cover plays a crucial role in maintaining unique terrestrial ecosystems.Vegetation growth is highly sensitive to variations in topographical factors,and the influence of topography on vegetation cover has attracted increasing attention.This study analyzed vegetation dynamics and their relationship with topography in the Tianshan Mountains of China using Landsat Normalized Difference Vegetation Index(NDVI)data during 2000–2022 and Shuttle Radar Topography Mission(SRTM)-derived topographical factors(elevation,slope,and aspect).Theil-Sen slope estimation and Mann-Kendall trend tests were applied to quantify temporal changes in vegetation,while a terrain area correction coefficient(K)was used to assess spatial associations of vegetation with topography.Random Forest(RF)regression and SHapley Additive exPlanations(SHAP)analysis evaluated the relative importance of topographical factors in shaping vegetation cover(multi-year mean NDVI)distribution.Key findings included that over the 23-a period,59.46%of the vegetated area exhibited significant improvement(P<0.05),with the southern Tianshan Mountains showing the most pronounced increase(70.59%),whereas vegetation degradation(3.10%)was primarily concentrated in river valleys with intensive human activities.RF-SHAP analysis revealed that elevation is the primary driver of vegetation cover patterns,explaining 52.00%of the NDVI variation.The peak NDVI(0.42)occurred at elevations between 2800 and 3200 m.Slope and aspect also significantly influenced vegetation distribution,and higher NDVI values and greater improvement trends were observed on shady(north-facing)slopes compared to sunny(south-facing)slopes.K-index analysis indicated pronounced vegetation change—both degradation and improvement—in areas with elevations between 1100 and 2800 m and slopes exceeding 5°,particularly on sunny slopes.Low-elevation desert areas in the southern Tianshan Mountains were highly susceptible to degradation.This study underscores the critical role of topography in regulating vegetation cover and its spatiotemporal dynamics,providing a scientific basis for sustainable management of arid mountain ecosystems.展开更多
The Hengduan Mountains,situated on the southeastern edge of the Qinghai-Tibet Plateau,are the longest and widest north-south-oriented mountain range in China,exerting a significant influence on the ecological and geog...The Hengduan Mountains,situated on the southeastern edge of the Qinghai-Tibet Plateau,are the longest and widest north-south-oriented mountain range in China,exerting a significant influence on the ecological and geographical pattern.Understanding the topographic and geomorphological characteristics of the Hengduan Mountains is fundamental and crucial for research in related fields such as ecology,geography,and sustainability.In this study,Digital Elevation Model(DEM)data were utilized to extract and analyze the topography and geomorphology(TG)pattern.TG maps have been developed to quantitatively classify the TG types in the Hengduan Mountains by combining the five factors of elevation,slope,aspect,relief and landform.The spatial distribution and quantitative characteristics of these factors were mapped and investigated using geographic information systems.The results revealed that:(1)The Hengduan Mountains exhibit an elongated north-south distribution,with an average elevation of approximately 3746 m,an average slope of around 25°,and an average relief of about 266 m.(2)The Hengduan Mountains display significant elevation differences,with an overall high elevation,characterized by a trend of lower elevation in the east and higher elevation in the west,as well as irregular orientations of various aspects.(3)The 19 landform types were identified,the landform types of the Hengduan Mountains are primarily composed of low-relief high-mountains(42.0618%),low-relief mid-mountains(22.4624%),and high-elevation hills(20.5839%).The results of the study can provide data and information support for the ecology,environmental protection and sustainable development of the Hengduan Mountains.展开更多
Traumatic injuries to the central nervous system(CNS) result in disruption of the intricate network of axons which connect functionally related neurons that are widely distributed throughout the brain and spinal cord....Traumatic injuries to the central nervous system(CNS) result in disruption of the intricate network of axons which connect functionally related neurons that are widely distributed throughout the brain and spinal cord.Under normal conditions,maintenance of this complex system is structurally and functionally supported by astrocytes (ACs)and other glial cells,the processes of which form a framework surrounding neuronal cell bodies,dendrites,axons,and synapses.展开更多
Near-field ground motion amplification in sedimentary basins is widely observed and crucial to earthquake hazard assessment.However,the effects of basin topography coupled with the low-velocity layer(LVL)on ground mot...Near-field ground motion amplification in sedimentary basins is widely observed and crucial to earthquake hazard assessment.However,the effects of basin topography coupled with the low-velocity layer(LVL)on ground motion amplification are not fully understood.By constructing 3D basin models with surrounding mountain terrains and performing ground motion simulations,we compare the ground motion characteristics with different basin LVL depths and LVL velocities.The velocity contrast between the LVL and bedrock controls the amplification magnitude.The maximum amplification area in the model changes from the central part to the periphery part of the basin as the velocity contrast decreases and can be greatly influenced by the distance between the source and the basin.The amplification also spreads along the mountain edge circling the basin.Our work sheds light on the distribution of amplification within sedimentary basins surrounded by mountains,revealing that the velocity contrast between the LVL and bedrock plays a pivotal role in controlling the magnitude of amplification.展开更多
Fog is a highly complex weather phenomenon influenced by numerous factors.This study investigated the impact of the Changbai Mountains’topography on the formation and development of spring fog in the Bohai Sea.From 1...Fog is a highly complex weather phenomenon influenced by numerous factors.This study investigated the impact of the Changbai Mountains’topography on the formation and development of spring fog in the Bohai Sea.From 12 to 14 May 2021,the Bohai region experienced a sea fog event.Utilizing Himawari-8 satellite data,ERA5 reanalysis dataset,land and sea station observations,the WRF model,a topography sensitivity experiment,and backward trajectory tracking,the influence of the Changbai Mountains’topography on the evolution of this sea fog event was assessed.Results indicated that the Changbai Mountains’topography significantly impacted the propagation and concentration of the sea fog through dual effects—namely,the Venturi Effect and Foehn Clearance Effect.Comparative simulations incorporating and excluding the Changbai Mountains revealed that its topography favored weak convergence(Venturi Effect)of low-level airflow over the Bohai Sea induced by a high-pressure system,promoting westward fog expansion.Additionally,the backward trajectory analysis further indicated that the Foehn Clearance Effect of the Changbai Mountains extended its influence far beyond the immediate lee side,contributing to significant changes in atmospheric conditions such as reductions in relative humidity and increases in potential temperature.The dry,warm foehn contributed to a reduction in the liquid water content,ultimately leading to the weakening or even dissipation of the sea fog in the region close to the Changbai Mountains.This study emphasizes the crucial role of the Changbai Mountains’topography in the development and evolution of fog,providing valuable insights for forecasting fog in regions with complex terrain.展开更多
Progressive modifications in submarine topography and shorelines drastically affect tidal dynamics in bays.This study examines the influence of topographic slope,bay length,and driving forces on tidal currents followi...Progressive modifications in submarine topography and shorelines drastically affect tidal dynamics in bays.This study examines the influence of topographic slope,bay length,and driving forces on tidal currents following land reclamation.Tidal equa-tions are analytically solved using infinite series,deriving expressions for tidal levels and currents in narrow bays with varying topog-raphy.Tidal levels,influenced by topographic variations,are characterized by amplitude and phase lag of their complex amplitude.These levels demonstrate high sensitivity to longitudinal slope variations but remain relatively stable under lateral slope changes.Un-der constant topographic slopes,even minor changes in bay length can drastically modify amplitude and phase lag,highlighting the sensitivity of tidal dynamics to geometric alterations.Tidal velocity notably increases with steeper longitudinal slopes and modestly rises with elevated lateral slopes.However,changes in longitudinal and lateral slopes do not considerably alter flow patterns.While external forces predominantly regulate tidal velocity with negligible effects on flow patterns,endogenous resistance influences veloci-ty but minimally impacts flow structure.These findings enhance the understanding of tidal responses to geometric and topographic changes,providing valuable guidance for land reclamation projects and coastal management strategies.展开更多
Analyzing coral reef topography is critical for understanding both the formation mechanisms of coral reefs and coral spatial distribution patterns.However,most topographic studies have focused on small-scale or locali...Analyzing coral reef topography is critical for understanding both the formation mechanisms of coral reefs and coral spatial distribution patterns.However,most topographic studies have focused on small-scale or localized survey sites,and investigations of reef macro-topography patterns and their relationship with coral distribution are scant.To address this gap,we conducted a comprehensive investigation of macro-topographic patterns across 12 coral reefs covering 607 km2 in the Xisha Islands,South China Sea.Using digital elevation models constructed from satellite bathymetric data with 16 m resolution,we analyzed spatial variations of seven topographic indices at the reef,geomorphic zone,and reef slope orientation levels in shallow waters.Field surveys were integrated with topographic indices to interpret and model coral distribution patterns.Our results revealed significant topographic heterogeneity,particularly in reef slopes and lagoon patch reefs.Reef slopes ranged from 0°to 33°,with rugosity values between 1.00 and 1.19.The steepness of reef slopes varied by orientation,being steepest in the west,southwest,and south,while the consistency of slope gradients was highest in the south,east,and northeast.Furthermore,stress-tolerant coral cover on reef slopes was effectively predicted by the factors of topographic indices,water depth,and slope aspect.Additionally,the topographic changes in reef flats and shallow lagoons were minimal.These findings advance our understanding of coral reef formation mechanisms in the Indo-Pacific region and provide a theoretical foundation for the conservation and restoration of coral reef ecosystems.展开更多
The impact of cross-sectional topographic variability on the kinetic properties of granular flows has been underexplored,which hinders the understanding of the kinematics of rock avalanches.In this study,the throat co...The impact of cross-sectional topographic variability on the kinetic properties of granular flows has been underexplored,which hinders the understanding of the kinematics of rock avalanches.In this study,the throat contraction index(T)is introduced to quantify variations in throat topography,and 96 numerical simulation experiments with varying T and slope angles(δ)are conducted.The findings indicate that granular flows experience transient obstructions when traversing throat topographies,primarily due to the periodic formation and breaking of the arch structure.Observations suggest that the acceleration of velocity in the tails of granular flows is restrained by the throat region,potentially altering the dynamics of related geohazards.In this study,the impact of throat topography is quantitatively assessed,demonstrating a reduction in peak flowrates of granular materials by 20%-80% and extending the flowduration up to six times.The present study proposes the throat-induced hazard index(Φ)to evaluate the influenceof throat topography on the risk of rockslides and avalanches characterized by granular flows,which may provide insights for the design of mitigation structures in topographic regions.展开更多
The textured roll and polished roll were applied instead of the ground roll in a 20-high mill to conduct two-pass rolling of 316L stainless steel strip with thickness of 0.027 mm.After the two-pass rolling with the te...The textured roll and polished roll were applied instead of the ground roll in a 20-high mill to conduct two-pass rolling of 316L stainless steel strip with thickness of 0.027 mm.After the two-pass rolling with the textured roll and polished roll(TPR),the surface roughness of the strip is dramatically reduced,and the surface topographical anisotropy index is diminished to 30.9%of the initial strip.Comparing with the strip rolled using the ground roll in both passes(GGR),the elongation of TPR rolled strip is obviously improved,and the mechanical property anisotropy is greatly weakened.The anisotropy index of tensile strength and elongation are 42.58%and 52.59%of that of GGR rolled strip,which is mainly attributed to the significant decrease of the texture intensity of the strip by TPR process.The results indicate that TPR process can obtain the stainless steel ultra-thin strip with smooth and uniform surface topography and good mechanical properties.展开更多
AIM:To evaluate the potential of artificial intelligence(AI)for automating corneal topography interpretation in orthokeratology patients,aiming to enhance diagnostic precision,efficiency,and clinical decision-making i...AIM:To evaluate the potential of artificial intelligence(AI)for automating corneal topography interpretation in orthokeratology patients,aiming to enhance diagnostic precision,efficiency,and clinical decision-making in myopia management.METHODS:The 1469 corneal topography images from 582 eyes of 326 myopic children treated with orthokeratology lenses over 47mo were collected.Each sample was categorized by decentration,treatment zone size,shape variation,and eye laterality.A multi-task AI model was developed to predict these parameters,with performance measured using area under curve(AUC),accuracy,and F1 scores.We compared AI-only,humanonly,and combined Human+AI approaches on a subset of 100 images.External validation with images from additional hospitals tested model generalizability.RESULTS:The model achieved high accuracy in eyeside prediction(AUC 0.95)and AUC values of 0.52-0.74 for decentration,treatment zone,and shape variation tasks.The combined Human+AI method outperformed AI-only and human-only approaches,achieving the highest accuracy(up to 87%)and fastest processing time(80ms).External validation confirmed robust performance in simple tasks,though accuracy was lower for complex classifications due to imaging variations.CONCLUSION:AI provides efficient routine corneal topography assessments,while complex cases benefit most from a Human+AI approach,particularly in scenarios requiring nuanced clinical interpretation.The model currently functions as an assistive tool.展开更多
High-speed milling of titanium alloys is widely used in aviation and aerospace industries for its high efficiency and good quality.In order to optimize the machining parameters in high-speed milling TB6 titanium alloy...High-speed milling of titanium alloys is widely used in aviation and aerospace industries for its high efficiency and good quality.In order to optimize the machining parameters in high-speed milling TB6 titanium alloy,experiments of high-speed milling and fatigue were conducted to investigate the effect of parameters on 3D surface topography and fatigue life.Based on the fatigue fracture,the effect mechanism of surface topography on the fatigue crack initiation was proposed.The experiment results show that when the milling speed ranged from 100 m/min to 140 m/min,and the feed per tooth ranged from 0.02 mm/z to 0.06 mm/z,the obtained surface roughness were within the limit（0.8 μm）.Fatigue life decreased sharply with the increase of surface equivalent stress concentration factor.The average error of fatigue life between the established model and the experimental results was 6.25%.The fatigue cracks nucleated at the intersection edge of machined surface.展开更多
We studied finite-element-method-based two-dimensional frequency-domain acoustic FWI under rugged topography conditions. The exponential attenuation boundary condition suitable for rugged topography is proposed to sol...We studied finite-element-method-based two-dimensional frequency-domain acoustic FWI under rugged topography conditions. The exponential attenuation boundary condition suitable for rugged topography is proposed to solve the cutoff botmdary problem as well as to consider the requirement of using the same subdivision grid in joint multifrequency inversion. The proposed method introduces the attenuation factor, and by adjusting it, acoustic waves are sufficiently attenuated in the attenuation layer to minimize the cutoff boundary effect. Based on the law of exponential attenuation, expressions for computing the attenuation factor and the thickness of attenuation layers are derived for different frequencies. In multifrequency-domain FWI, the conjugate gradient method is used to solve equations in the Gauss-Newton algorithm and thus minimize the computation cost in calculating the Hessian matrix. In addition, the effect of initial model selection and frequency combination on FWI is analyzed. Examples using numerical simulations and FWI calculations are used to verify the efficiency of the proposed method.展开更多
As fundamental parameters of the Antarctic Ice Sheet,ice thickness and subglacial topography are critical factors for studying the basal conditions and mass balance in Antarctica.During CHINARE 24（the 24 th Chinese N...As fundamental parameters of the Antarctic Ice Sheet,ice thickness and subglacial topography are critical factors for studying the basal conditions and mass balance in Antarctica.During CHINARE 24（the 24 th Chinese National Antarctic Research Expedition,2007/08）,the research team used a deep ice-penetrating radar system to measure the ice thickness and subglacial topography of the ＂Chinese Wall＂ around Kunlun Station,East Antarctica.Preliminary results show that the ice thickness varies mostly from 1600 m to 2800 m along the ＂Chinese Wall＂,with the thickest ice being 3444 m,and the thinnest ice 1255 m.The average bedrock elevation is 1722 m,while the minimum is just 604 m.Compared with the northern side of the ice divide,the ice thickness is a little greater and the subglacial topography lower on the southern side,which is also characterized by four deep valleys.We found no basal freeze-on ice in the Gamburtsev Subglacial Mountains area,subglacial lakes,or water bodies along the ＂Chinese Wall＂.Ice thickness and subglacial topography data extracted from the Bedmap 2 database along the ＂Chinese Wall＂ are consistent with our results,but their resolution and accuracy are very limited in areas where the bedrock fluctuates intensely.The distribution of ice thickness and subglacial topography detected by ice-penetrating radar clarifies the features of the ice sheet in this ＂inaccessible＂ region.These results will help to advance the study of ice sheet dynamics and the determination of future locations of the GSM＇s geological and deep ice core drilling sites in the Dome A region.展开更多
In order to eliminate the effect of ocean bottom topography on seismic wave field,we transformed curved（x,z）coordinate system grids into rectangular（ξ,η）coordinate system grids and derived a 2-D scalar acoustic ...In order to eliminate the effect of ocean bottom topography on seismic wave field,we transformed curved（x,z）coordinate system grids into rectangular（ξ,η）coordinate system grids and derived a 2-D scalar acoustic wave equation in theξ,ηdomain.The seismic wave field collected at the sea surface was downward continued to the ocean bottom by the inverse finite difference method with the water velocity and then was reversely continued to the ocean surface by the finite difference method using the layer velocity from just below the ocean bottom in the（ξ,η）domain.Simulation calculations and practical application show that this method can not only remove the reflection travel time distortion but also correct the dynamic parameter changes caused by the ocean bottom topography.The inverted velocity after wave field continuation is much more accurate than before continuation and the image section was greatly improved compared to the original wave field.展开更多
Imaging mechanism of underwater topography by SAR and a underwater topography SAR detection model built on the theory of underwater topography detection with SAR image presented by Yuan Yeli are used to detect the und...Imaging mechanism of underwater topography by SAR and a underwater topography SAR detection model built on the theory of underwater topography detection with SAR image presented by Yuan Yeli are used to detect the underwater topography of Shuangzi Reefs in the Nansha Islands with three scenes of SAR images acquired in different time. Detection results of three SAR images are compared with the chart topography and the detection errors are analyzed. Underwater topography detection experiments of Shuangzi Reefs show that the detection model is practicable. The detection results indicate that SAR images acquired in different time also can be used to detect the underwater topography, and the detection results are affected by the ocean conditions in the SAR acquiring time.展开更多
Based on the latest submarine topography data of the China 908 Project （China offshore marine environmental comprehensive investigation and assessment）,we analyzed the general China offshore submarine topographical ...Based on the latest submarine topography data of the China 908 Project （China offshore marine environmental comprehensive investigation and assessment）,we analyzed the general China offshore submarine topographical characteristics and the factors influencing its development.The submarine topography off the coast of China follows the NW-SE trend of the land topography.The gradient of the submarine topography ranges from 0.2％ to 1.6％ with an average gradient of about 0.8％.The depth contours run mostly parallel to the coast,and extend out to sea in estuary areas.The submarine topography is dominated by the geological structure,which shows the typical characteristics of two uplifts and two subsidence events from north to south.The geological structure combined with the different sedimentary environments and complex hydrodynamic conditions produced topography that can be characterized by three types：sedimentary basins,compressionuplift,and transition form.In the sedimentary basin and compression-uplift regions,the topographical undulation is small,sediments are fine-grained,and the currents flow in a single direction,leading to bays with sedimentary plains and underwater accumulation slopes,which are of the same tectonic origin.Transition-type topography is characterized by strong undulations and mixed-size sediment particles,terraces and scarps inshore and shelf plains and erosion-deposition landforms offshore.This is a result of incomplete fault block development and repeated transgressions.In the deposition reformation regions （transition form type）,the topography has strong undulations,the sediments are coarse,tidal sand ridges are well-developed at terrigenoussupplied estuaries and convergence zones,and the Holocene sediments are thick,transformed by tides,river runoff,and currents.展开更多
Engineering seismic exploration aims at shallow imaging which is confused by statics if the surface is uneven. Direct pre-stack depth migration （DPDM） is based on accurate elevations of sources and receivers, by whi...Engineering seismic exploration aims at shallow imaging which is confused by statics if the surface is uneven. Direct pre-stack depth migration （DPDM） is based on accurate elevations of sources and receivers, by which static correction is completely abandoned before migration and surely the imaging quality is remarkably improved. To obtain some artificial shot gathers, high-order staggered-grid finite-difference （FD） method is adapted to model acoustic wave propagation. Since the shot gathers are always disturbed by regular interferences, the statics still must be applied to supporting the interference elimination by apparent velocity filtering method. Then all the shot gathers should be removed back to their original positions by reverse statics. Finally, they are migrated by pre-stack reverse-time depth migration and imaged. The numerical experiments show that the DPDM can ideally avoid the mistakes caused by statics and increase imaging precision.展开更多
A barotropic model containing large-scale topography and zonal mean flow is established to discuss the effects of large-scale topography on the low-frequency waves. The results show that what affects low-frequency wav...A barotropic model containing large-scale topography and zonal mean flow is established to discuss the effects of large-scale topography on the low-frequency waves. The results show that what affects low-frequency waves mostly is maximal height of topography and topographic slope. The former makes frequency of topographic Rossby waves decrease, the latter makes Rossby waves instable. Moreover, when topographic slope is appropriate, it can also make Rossby waves turn into low-frequency waves.展开更多
Surface of Al 2O 3 ceramic was processed by an excimer laser and the characteristics of topography were examined based on the application of the microelectromechanical system(MEMS). It is indicated that the statisti...Surface of Al 2O 3 ceramic was processed by an excimer laser and the characteristics of topography were examined based on the application of the microelectromechanical system(MEMS). It is indicated that the statistic parameters of surface topography processed by the excimer laser have an obvious regularity. The arithmetic-mean value R a and the root-mean square value R q change with the changing of processing parameters in the same step and trend, and there is a quantitative relation between them.A simplified model is proposed for the excimer laser processing surface profile, whose results of the analysis and calculation agree basically with the experimental data. Furthermore,the surfaces processed by excimer laser are greatly flat. Skewness root-mean-square value Z· q changed little with the change of the technological parameters. The above characteristics depend on the processing principle of excimer laser, quite different from the cutting processing.展开更多
基金supported by the Institut de Recherche pour le Développement (IRD), France (UMR IGE Imputation, Grant no. 252RA5)the Laboratoire Mixte International NEXUS (LMI-NEXUS) (Abidjan, Côte d'Ivoire)
文摘This study uses the International Center for Theoretical Physics(ICTP)Regional Climate Model version 5(RegCM5.0)to investigate the impact of the Fouta Djallon topography on the mean surface climate of West Africa with a focus on the June–September(JJAS)season.Two experiments were conducted:a control simulation with current topography(REF)and a sensitivity simulation with flattened terrain(FLAT).Results show that reducing the elevation leads to decreased rainfall and increased temperatures,particularly over the Guinea Coast and the modified topographic region.Rainfall decreases by approximately 4.59%in the Guinea Coast sub-zone,while it slightly increases by about 2.76%in the Sahel.The most significant rainfall reduction,exceeding 20%,occurs over the flattened area.Temperature rises across both regions,with the strongest warming over the Fouta Jallon region.This pattern is likely due to the suppression of orographic uplift,which enhances the southwesterly monsoon flow from the Atlantic Ocean and causes a northward shift of the Intertropical Convergence Zone(ITCZ)into the Sahel.The findings highlight the key role of Fouta Jallon topography on the West African climate system.
基金supported by the National Key R&D Program of China(2023YFE0207900)。
文摘In the arid regions of Northwest China,vegetation cover plays a crucial role in maintaining unique terrestrial ecosystems.Vegetation growth is highly sensitive to variations in topographical factors,and the influence of topography on vegetation cover has attracted increasing attention.This study analyzed vegetation dynamics and their relationship with topography in the Tianshan Mountains of China using Landsat Normalized Difference Vegetation Index(NDVI)data during 2000–2022 and Shuttle Radar Topography Mission(SRTM)-derived topographical factors(elevation,slope,and aspect).Theil-Sen slope estimation and Mann-Kendall trend tests were applied to quantify temporal changes in vegetation,while a terrain area correction coefficient(K)was used to assess spatial associations of vegetation with topography.Random Forest(RF)regression and SHapley Additive exPlanations(SHAP)analysis evaluated the relative importance of topographical factors in shaping vegetation cover(multi-year mean NDVI)distribution.Key findings included that over the 23-a period,59.46%of the vegetated area exhibited significant improvement(P<0.05),with the southern Tianshan Mountains showing the most pronounced increase(70.59%),whereas vegetation degradation(3.10%)was primarily concentrated in river valleys with intensive human activities.RF-SHAP analysis revealed that elevation is the primary driver of vegetation cover patterns,explaining 52.00%of the NDVI variation.The peak NDVI(0.42)occurred at elevations between 2800 and 3200 m.Slope and aspect also significantly influenced vegetation distribution,and higher NDVI values and greater improvement trends were observed on shady(north-facing)slopes compared to sunny(south-facing)slopes.K-index analysis indicated pronounced vegetation change—both degradation and improvement—in areas with elevations between 1100 and 2800 m and slopes exceeding 5°,particularly on sunny slopes.Low-elevation desert areas in the southern Tianshan Mountains were highly susceptible to degradation.This study underscores the critical role of topography in regulating vegetation cover and its spatiotemporal dynamics,providing a scientific basis for sustainable management of arid mountain ecosystems.
基金funded by the Yunnan Provincial Basic Research Joint Special Fund Project(2019FH001(-052))Cangshan Mountain Synthetic Scientific Expeditions Fund.
文摘The Hengduan Mountains,situated on the southeastern edge of the Qinghai-Tibet Plateau,are the longest and widest north-south-oriented mountain range in China,exerting a significant influence on the ecological and geographical pattern.Understanding the topographic and geomorphological characteristics of the Hengduan Mountains is fundamental and crucial for research in related fields such as ecology,geography,and sustainability.In this study,Digital Elevation Model(DEM)data were utilized to extract and analyze the topography and geomorphology(TG)pattern.TG maps have been developed to quantitatively classify the TG types in the Hengduan Mountains by combining the five factors of elevation,slope,aspect,relief and landform.The spatial distribution and quantitative characteristics of these factors were mapped and investigated using geographic information systems.The results revealed that:(1)The Hengduan Mountains exhibit an elongated north-south distribution,with an average elevation of approximately 3746 m,an average slope of around 25°,and an average relief of about 266 m.(2)The Hengduan Mountains display significant elevation differences,with an overall high elevation,characterized by a trend of lower elevation in the east and higher elevation in the west,as well as irregular orientations of various aspects.(3)The 19 landform types were identified,the landform types of the Hengduan Mountains are primarily composed of low-relief high-mountains(42.0618%),low-relief mid-mountains(22.4624%),and high-elevation hills(20.5839%).The results of the study can provide data and information support for the ecology,environmental protection and sustainable development of the Hengduan Mountains.
文摘Traumatic injuries to the central nervous system(CNS) result in disruption of the intricate network of axons which connect functionally related neurons that are widely distributed throughout the brain and spinal cord.Under normal conditions,maintenance of this complex system is structurally and functionally supported by astrocytes (ACs)and other glial cells,the processes of which form a framework surrounding neuronal cell bodies,dendrites,axons,and synapses.
基金supported by the University of Science and Technology of China(USTC)Research Funds of the Double First-Class Initiative(YD2080002009)the National Natural Science Foundation of China(42074049 and 41974042)the Youth Innovation Promotion Association of the Chinese Academy of Sciences(2023471).
文摘Near-field ground motion amplification in sedimentary basins is widely observed and crucial to earthquake hazard assessment.However,the effects of basin topography coupled with the low-velocity layer(LVL)on ground motion amplification are not fully understood.By constructing 3D basin models with surrounding mountain terrains and performing ground motion simulations,we compare the ground motion characteristics with different basin LVL depths and LVL velocities.The velocity contrast between the LVL and bedrock controls the amplification magnitude.The maximum amplification area in the model changes from the central part to the periphery part of the basin as the velocity contrast decreases and can be greatly influenced by the distance between the source and the basin.The amplification also spreads along the mountain edge circling the basin.Our work sheds light on the distribution of amplification within sedimentary basins surrounded by mountains,revealing that the velocity contrast between the LVL and bedrock plays a pivotal role in controlling the magnitude of amplification.
基金jointly supported by the National Natural Science Foundation of China[grant number 42205009]the Open Grants of the State Key Laboratory of Severe Weather[grant number 2024LASWB23]+1 种基金the Collaborative Innovation Project for Marine Meteorological Science and Technology in the Bohai Rim Region[grant number QYXM202315]the Research and Development Project of Hebei Provincial Meteorological Bureau[grant number 22ky26]。
文摘Fog is a highly complex weather phenomenon influenced by numerous factors.This study investigated the impact of the Changbai Mountains’topography on the formation and development of spring fog in the Bohai Sea.From 12 to 14 May 2021,the Bohai region experienced a sea fog event.Utilizing Himawari-8 satellite data,ERA5 reanalysis dataset,land and sea station observations,the WRF model,a topography sensitivity experiment,and backward trajectory tracking,the influence of the Changbai Mountains’topography on the evolution of this sea fog event was assessed.Results indicated that the Changbai Mountains’topography significantly impacted the propagation and concentration of the sea fog through dual effects—namely,the Venturi Effect and Foehn Clearance Effect.Comparative simulations incorporating and excluding the Changbai Mountains revealed that its topography favored weak convergence(Venturi Effect)of low-level airflow over the Bohai Sea induced by a high-pressure system,promoting westward fog expansion.Additionally,the backward trajectory analysis further indicated that the Foehn Clearance Effect of the Changbai Mountains extended its influence far beyond the immediate lee side,contributing to significant changes in atmospheric conditions such as reductions in relative humidity and increases in potential temperature.The dry,warm foehn contributed to a reduction in the liquid water content,ultimately leading to the weakening or even dissipation of the sea fog in the region close to the Changbai Mountains.This study emphasizes the crucial role of the Changbai Mountains’topography in the development and evolution of fog,providing valuable insights for forecasting fog in regions with complex terrain.
基金supported by the National Natural Sci-ence Foundation of China(No.U2106204)the Shanxi Water Conservancy Science and Technology Re-search and Extension Project(No.2023ZF19).
文摘Progressive modifications in submarine topography and shorelines drastically affect tidal dynamics in bays.This study examines the influence of topographic slope,bay length,and driving forces on tidal currents following land reclamation.Tidal equa-tions are analytically solved using infinite series,deriving expressions for tidal levels and currents in narrow bays with varying topog-raphy.Tidal levels,influenced by topographic variations,are characterized by amplitude and phase lag of their complex amplitude.These levels demonstrate high sensitivity to longitudinal slope variations but remain relatively stable under lateral slope changes.Un-der constant topographic slopes,even minor changes in bay length can drastically modify amplitude and phase lag,highlighting the sensitivity of tidal dynamics to geometric alterations.Tidal velocity notably increases with steeper longitudinal slopes and modestly rises with elevated lateral slopes.However,changes in longitudinal and lateral slopes do not considerably alter flow patterns.While external forces predominantly regulate tidal velocity with negligible effects on flow patterns,endogenous resistance influences veloci-ty but minimally impacts flow structure.These findings enhance the understanding of tidal responses to geometric and topographic changes,providing valuable guidance for land reclamation projects and coastal management strategies.
基金The Guangxi Science and Technology Program under contract No.AD25069075the National Natural Science Foundation of China under contract No.42276182+2 种基金the Major Talent Project of Guangxi Zhuang Autonomous Region under contract No.GXR-2BGQ2525027the Natural Science and Technology Innovation Development Doubling Program of Guangxi University under contract No.2023BZRC019the Guangxi Natural Science Foundation of China under contract No.2022GXNSFAA035548.
文摘Analyzing coral reef topography is critical for understanding both the formation mechanisms of coral reefs and coral spatial distribution patterns.However,most topographic studies have focused on small-scale or localized survey sites,and investigations of reef macro-topography patterns and their relationship with coral distribution are scant.To address this gap,we conducted a comprehensive investigation of macro-topographic patterns across 12 coral reefs covering 607 km2 in the Xisha Islands,South China Sea.Using digital elevation models constructed from satellite bathymetric data with 16 m resolution,we analyzed spatial variations of seven topographic indices at the reef,geomorphic zone,and reef slope orientation levels in shallow waters.Field surveys were integrated with topographic indices to interpret and model coral distribution patterns.Our results revealed significant topographic heterogeneity,particularly in reef slopes and lagoon patch reefs.Reef slopes ranged from 0°to 33°,with rugosity values between 1.00 and 1.19.The steepness of reef slopes varied by orientation,being steepest in the west,southwest,and south,while the consistency of slope gradients was highest in the south,east,and northeast.Furthermore,stress-tolerant coral cover on reef slopes was effectively predicted by the factors of topographic indices,water depth,and slope aspect.Additionally,the topographic changes in reef flats and shallow lagoons were minimal.These findings advance our understanding of coral reef formation mechanisms in the Indo-Pacific region and provide a theoretical foundation for the conservation and restoration of coral reef ecosystems.
基金supported by the National Natural Science Foundation of China(Grant Nos.42307194 and 42120104002)the Young Elite Scientists Sponsorship Program by CAST(Grant No.2024QNRC001).
文摘The impact of cross-sectional topographic variability on the kinetic properties of granular flows has been underexplored,which hinders the understanding of the kinematics of rock avalanches.In this study,the throat contraction index(T)is introduced to quantify variations in throat topography,and 96 numerical simulation experiments with varying T and slope angles(δ)are conducted.The findings indicate that granular flows experience transient obstructions when traversing throat topographies,primarily due to the periodic formation and breaking of the arch structure.Observations suggest that the acceleration of velocity in the tails of granular flows is restrained by the throat region,potentially altering the dynamics of related geohazards.In this study,the impact of throat topography is quantitatively assessed,demonstrating a reduction in peak flowrates of granular materials by 20%-80% and extending the flowduration up to six times.The present study proposes the throat-induced hazard index(Φ)to evaluate the influenceof throat topography on the risk of rockslides and avalanches characterized by granular flows,which may provide insights for the design of mitigation structures in topographic regions.
基金supported by the National Natural Science Foundation of China(Nos.51974196,52275361,and 52305406)the Key Projects of the National Natural Science Foundation of China(No.U22A20188)the Special Projects of the Central Government in Guidance of Local Science and Technology Development(YDZX20191400002149).
文摘The textured roll and polished roll were applied instead of the ground roll in a 20-high mill to conduct two-pass rolling of 316L stainless steel strip with thickness of 0.027 mm.After the two-pass rolling with the textured roll and polished roll(TPR),the surface roughness of the strip is dramatically reduced,and the surface topographical anisotropy index is diminished to 30.9%of the initial strip.Comparing with the strip rolled using the ground roll in both passes(GGR),the elongation of TPR rolled strip is obviously improved,and the mechanical property anisotropy is greatly weakened.The anisotropy index of tensile strength and elongation are 42.58%and 52.59%of that of GGR rolled strip,which is mainly attributed to the significant decrease of the texture intensity of the strip by TPR process.The results indicate that TPR process can obtain the stainless steel ultra-thin strip with smooth and uniform surface topography and good mechanical properties.
基金Supported by the National Natural Science Foundation of China(No.82201195).
文摘AIM:To evaluate the potential of artificial intelligence(AI)for automating corneal topography interpretation in orthokeratology patients,aiming to enhance diagnostic precision,efficiency,and clinical decision-making in myopia management.METHODS:The 1469 corneal topography images from 582 eyes of 326 myopic children treated with orthokeratology lenses over 47mo were collected.Each sample was categorized by decentration,treatment zone size,shape variation,and eye laterality.A multi-task AI model was developed to predict these parameters,with performance measured using area under curve(AUC),accuracy,and F1 scores.We compared AI-only,humanonly,and combined Human+AI approaches on a subset of 100 images.External validation with images from additional hospitals tested model generalizability.RESULTS:The model achieved high accuracy in eyeside prediction(AUC 0.95)and AUC values of 0.52-0.74 for decentration,treatment zone,and shape variation tasks.The combined Human+AI method outperformed AI-only and human-only approaches,achieving the highest accuracy(up to 87%)and fastest processing time(80ms).External validation confirmed robust performance in simple tasks,though accuracy was lower for complex classifications due to imaging variations.CONCLUSION:AI provides efficient routine corneal topography assessments,while complex cases benefit most from a Human+AI approach,particularly in scenarios requiring nuanced clinical interpretation.The model currently functions as an assistive tool.
基金Projects(50975237,51005184) supported by the National Natural Science Foundation of China
文摘High-speed milling of titanium alloys is widely used in aviation and aerospace industries for its high efficiency and good quality.In order to optimize the machining parameters in high-speed milling TB6 titanium alloy,experiments of high-speed milling and fatigue were conducted to investigate the effect of parameters on 3D surface topography and fatigue life.Based on the fatigue fracture,the effect mechanism of surface topography on the fatigue crack initiation was proposed.The experiment results show that when the milling speed ranged from 100 m/min to 140 m/min,and the feed per tooth ranged from 0.02 mm/z to 0.06 mm/z,the obtained surface roughness were within the limit（0.8 μm）.Fatigue life decreased sharply with the increase of surface equivalent stress concentration factor.The average error of fatigue life between the established model and the experimental results was 6.25%.The fatigue cracks nucleated at the intersection edge of machined surface.
基金financially supported by the National High Technology Research and Development Program of China(No.2012AA09A20105)the National Science Foundation Network(No.41574127)
文摘We studied finite-element-method-based two-dimensional frequency-domain acoustic FWI under rugged topography conditions. The exponential attenuation boundary condition suitable for rugged topography is proposed to solve the cutoff botmdary problem as well as to consider the requirement of using the same subdivision grid in joint multifrequency inversion. The proposed method introduces the attenuation factor, and by adjusting it, acoustic waves are sufficiently attenuated in the attenuation layer to minimize the cutoff boundary effect. Based on the law of exponential attenuation, expressions for computing the attenuation factor and the thickness of attenuation layers are derived for different frequencies. In multifrequency-domain FWI, the conjugate gradient method is used to solve equations in the Gauss-Newton algorithm and thus minimize the computation cost in calculating the Hessian matrix. In addition, the effect of initial model selection and frequency combination on FWI is analyzed. Examples using numerical simulations and FWI calculations are used to verify the efficiency of the proposed method.
基金supported by National Basic Research Program of China(Grant Nos.2013CBA01804 and 2012CB957702)the Chinese Polar Environmental Comprehensive Investigation and Assessment Programs(Grant No.CHINARE-02-02)the National Science Foundation of China(Grant No.41101071)
文摘As fundamental parameters of the Antarctic Ice Sheet,ice thickness and subglacial topography are critical factors for studying the basal conditions and mass balance in Antarctica.During CHINARE 24（the 24 th Chinese National Antarctic Research Expedition,2007/08）,the research team used a deep ice-penetrating radar system to measure the ice thickness and subglacial topography of the ＂Chinese Wall＂ around Kunlun Station,East Antarctica.Preliminary results show that the ice thickness varies mostly from 1600 m to 2800 m along the ＂Chinese Wall＂,with the thickest ice being 3444 m,and the thinnest ice 1255 m.The average bedrock elevation is 1722 m,while the minimum is just 604 m.Compared with the northern side of the ice divide,the ice thickness is a little greater and the subglacial topography lower on the southern side,which is also characterized by four deep valleys.We found no basal freeze-on ice in the Gamburtsev Subglacial Mountains area,subglacial lakes,or water bodies along the ＂Chinese Wall＂.Ice thickness and subglacial topography data extracted from the Bedmap 2 database along the ＂Chinese Wall＂ are consistent with our results,but their resolution and accuracy are very limited in areas where the bedrock fluctuates intensely.The distribution of ice thickness and subglacial topography detected by ice-penetrating radar clarifies the features of the ice sheet in this ＂inaccessible＂ region.These results will help to advance the study of ice sheet dynamics and the determination of future locations of the GSM＇s geological and deep ice core drilling sites in the Dome A region.
基金sponsored by the National 973 Program of China(Grant No.2009CB219505)International Science&Technology Cooperation Program of China(Grant No.2010DFA21630)
文摘In order to eliminate the effect of ocean bottom topography on seismic wave field,we transformed curved（x,z）coordinate system grids into rectangular（ξ,η）coordinate system grids and derived a 2-D scalar acoustic wave equation in theξ,ηdomain.The seismic wave field collected at the sea surface was downward continued to the ocean bottom by the inverse finite difference method with the water velocity and then was reversely continued to the ocean surface by the finite difference method using the layer velocity from just below the ocean bottom in the（ξ,η）domain.Simulation calculations and practical application show that this method can not only remove the reflection travel time distortion but also correct the dynamic parameter changes caused by the ocean bottom topography.The inverted velocity after wave field continuation is much more accurate than before continuation and the image section was greatly improved compared to the original wave field.
文摘Imaging mechanism of underwater topography by SAR and a underwater topography SAR detection model built on the theory of underwater topography detection with SAR image presented by Yuan Yeli are used to detect the underwater topography of Shuangzi Reefs in the Nansha Islands with three scenes of SAR images acquired in different time. Detection results of three SAR images are compared with the chart topography and the detection errors are analyzed. Underwater topography detection experiments of Shuangzi Reefs show that the detection model is practicable. The detection results indicate that SAR images acquired in different time also can be used to detect the underwater topography, and the detection results are affected by the ocean conditions in the SAR acquiring time.
基金granted by the National Science Foundation of China (No. 41276058)the project of integrated achievement on investigation of submarine topography and geomorphology in offshore China (No. 908-ZC-I-07)the State Oceanic Administration public welfare research project (No. 201105001, No. 2012418004)
文摘Based on the latest submarine topography data of the China 908 Project （China offshore marine environmental comprehensive investigation and assessment）,we analyzed the general China offshore submarine topographical characteristics and the factors influencing its development.The submarine topography off the coast of China follows the NW-SE trend of the land topography.The gradient of the submarine topography ranges from 0.2％ to 1.6％ with an average gradient of about 0.8％.The depth contours run mostly parallel to the coast,and extend out to sea in estuary areas.The submarine topography is dominated by the geological structure,which shows the typical characteristics of two uplifts and two subsidence events from north to south.The geological structure combined with the different sedimentary environments and complex hydrodynamic conditions produced topography that can be characterized by three types：sedimentary basins,compressionuplift,and transition form.In the sedimentary basin and compression-uplift regions,the topographical undulation is small,sediments are fine-grained,and the currents flow in a single direction,leading to bays with sedimentary plains and underwater accumulation slopes,which are of the same tectonic origin.Transition-type topography is characterized by strong undulations and mixed-size sediment particles,terraces and scarps inshore and shelf plains and erosion-deposition landforms offshore.This is a result of incomplete fault block development and repeated transgressions.In the deposition reformation regions （transition form type）,the topography has strong undulations,the sediments are coarse,tidal sand ridges are well-developed at terrigenoussupplied estuaries and convergence zones,and the Holocene sediments are thick,transformed by tides,river runoff,and currents.
文摘Engineering seismic exploration aims at shallow imaging which is confused by statics if the surface is uneven. Direct pre-stack depth migration （DPDM） is based on accurate elevations of sources and receivers, by which static correction is completely abandoned before migration and surely the imaging quality is remarkably improved. To obtain some artificial shot gathers, high-order staggered-grid finite-difference （FD） method is adapted to model acoustic wave propagation. Since the shot gathers are always disturbed by regular interferences, the statics still must be applied to supporting the interference elimination by apparent velocity filtering method. Then all the shot gathers should be removed back to their original positions by reverse statics. Finally, they are migrated by pre-stack reverse-time depth migration and imaged. The numerical experiments show that the DPDM can ideally avoid the mistakes caused by statics and increase imaging precision.
文摘A barotropic model containing large-scale topography and zonal mean flow is established to discuss the effects of large-scale topography on the low-frequency waves. The results show that what affects low-frequency waves mostly is maximal height of topography and topographic slope. The former makes frequency of topographic Rossby waves decrease, the latter makes Rossby waves instable. Moreover, when topographic slope is appropriate, it can also make Rossby waves turn into low-frequency waves.
文摘Surface of Al 2O 3 ceramic was processed by an excimer laser and the characteristics of topography were examined based on the application of the microelectromechanical system(MEMS). It is indicated that the statistic parameters of surface topography processed by the excimer laser have an obvious regularity. The arithmetic-mean value R a and the root-mean square value R q change with the changing of processing parameters in the same step and trend, and there is a quantitative relation between them.A simplified model is proposed for the excimer laser processing surface profile, whose results of the analysis and calculation agree basically with the experimental data. Furthermore,the surfaces processed by excimer laser are greatly flat. Skewness root-mean-square value Z· q changed little with the change of the technological parameters. The above characteristics depend on the processing principle of excimer laser, quite different from the cutting processing.
