The occurrence of microseismic is not random but is related to the physical properties of the underground medium.Due to the low intensity and the influence of noise,microseismic eventually lead to poor signal-to-noise...The occurrence of microseismic is not random but is related to the physical properties of the underground medium.Due to the low intensity and the influence of noise,microseismic eventually lead to poor signal-to-noise ratio.We proposed a method for automatic detection of microseismic events by adoption of multiscale top-hat transformation.The method is based on the difference between the signal and noise in the multiscale top-hat transform section and achieves the detection on a specific section.The microseismic data are decomposed into different scales by multiscale morphology top-hat transformation firstly.Then the potential microseismic events could be detected by picking up the peak value in the multiscale top-hat section,and the characteristic profile obtains the start point with a specific threshold value.Finally,the synthetic data experiences demonstrate the advantages of this method under strong and weak noisy conditions,and the filed data example also shows its reliability and adaptability.展开更多
The high-frequency components in the traditional multi-scale transform method are approximately sparse, which can represent different information of the details. But in the low-frequency component, the coefficients ar...The high-frequency components in the traditional multi-scale transform method are approximately sparse, which can represent different information of the details. But in the low-frequency component, the coefficients around the zero value are very few, so we cannot sparsely represent low-frequency image information. The low-frequency component contains the main energy of the image and depicts the profile of the image. Direct fusion of the low-frequency component will not be conducive to obtain highly accurate fusion result. Therefore, this paper presents an infrared and visible image fusion method combining the multi-scale and top-hat transforms. On one hand, the new top-hat-transform can effectively extract the salient features of the low-frequency component. On the other hand, the multi-scale transform can extract highfrequency detailed information in multiple scales and from diverse directions. The combination of the two methods is conducive to the acquisition of more characteristics and more accurate fusion results. Among them, for the low-frequency component, a new type of top-hat transform is used to extract low-frequency features, and then different fusion rules are applied to fuse the low-frequency features and low-frequency background; for high-frequency components, the product of characteristics method is used to integrate the detailed information in high-frequency. Experimental results show that the proposed algorithm can obtain more detailed information and clearer infrared target fusion results than the traditional multiscale transform methods. Compared with the state-of-the-art fusion methods based on sparse representation, the proposed algorithm is simple and efficacious, and the time consumption is significantly reduced.展开更多
针对地图综合中建筑多边形化简方法依赖人工规则、自动化程度低且难以利用已有化简成果的问题,本文提出了一种基于Transformer机制的建筑多边形化简模型。该模型首先把建筑多边形映射至一定范围的网格空间,将建筑多边形的坐标串表达为...针对地图综合中建筑多边形化简方法依赖人工规则、自动化程度低且难以利用已有化简成果的问题,本文提出了一种基于Transformer机制的建筑多边形化简模型。该模型首先把建筑多边形映射至一定范围的网格空间,将建筑多边形的坐标串表达为网格序列,从而获取建筑多边形化简前后的Token序列,构建出建筑多边形化简样本对数据;随后采用Transformer架构建立模型,基于样本数据利用模型的掩码自注意力机制学习点序列之间的依赖关系,最终逐点生成新的简化多边形,从而实现建筑多边形的化简。在训练过程中,模型使用结构化的样本数据,设计了忽略特定索引的交叉熵损失函数以提升化简质量。试验设计包括主试验与泛化验证两部分。主试验基于洛杉矶1∶2000建筑数据集,分别采用0.2、0.3和0.5 mm 3种网格尺寸对多边形进行编码,实现了目标比例尺为1∶5000与1∶10000的化简。试验结果表明,在0.3 mm的网格尺寸下模型性能最优,验证集上的化简结果与人工标注的一致率超过92.0%,且针对北京部分区域的建筑多边形数据的泛化试验验证了模型的迁移能力;与LSTM模型的对比分析显示,在参数规模相近的条件下,LSTM模型无法形成有效收敛,并生成可用结果。本文证实了Transformer在处理空间几何序列任务中的潜力,且能够有效复用已有化简样本,为智能建筑多边形化简提供了具有工程实用价值的途径。展开更多
基金supported in part by the National Natural Science Foundation of China under Grant 41904098Fundamental Research Funds for the Central Universities,under Grant 2462018YJRC020 and Grant 2462020YXZZ006。
文摘The occurrence of microseismic is not random but is related to the physical properties of the underground medium.Due to the low intensity and the influence of noise,microseismic eventually lead to poor signal-to-noise ratio.We proposed a method for automatic detection of microseismic events by adoption of multiscale top-hat transformation.The method is based on the difference between the signal and noise in the multiscale top-hat transform section and achieves the detection on a specific section.The microseismic data are decomposed into different scales by multiscale morphology top-hat transformation firstly.Then the potential microseismic events could be detected by picking up the peak value in the multiscale top-hat section,and the characteristic profile obtains the start point with a specific threshold value.Finally,the synthetic data experiences demonstrate the advantages of this method under strong and weak noisy conditions,and the filed data example also shows its reliability and adaptability.
基金Project supported by the National Natural Science Foundation of China(Grant No.61402368)Aerospace Support Fund,China(Grant No.2017-HT-XGD)Aerospace Science and Technology Innovation Foundation,China(Grant No.2017 ZD 53047)
文摘The high-frequency components in the traditional multi-scale transform method are approximately sparse, which can represent different information of the details. But in the low-frequency component, the coefficients around the zero value are very few, so we cannot sparsely represent low-frequency image information. The low-frequency component contains the main energy of the image and depicts the profile of the image. Direct fusion of the low-frequency component will not be conducive to obtain highly accurate fusion result. Therefore, this paper presents an infrared and visible image fusion method combining the multi-scale and top-hat transforms. On one hand, the new top-hat-transform can effectively extract the salient features of the low-frequency component. On the other hand, the multi-scale transform can extract highfrequency detailed information in multiple scales and from diverse directions. The combination of the two methods is conducive to the acquisition of more characteristics and more accurate fusion results. Among them, for the low-frequency component, a new type of top-hat transform is used to extract low-frequency features, and then different fusion rules are applied to fuse the low-frequency features and low-frequency background; for high-frequency components, the product of characteristics method is used to integrate the detailed information in high-frequency. Experimental results show that the proposed algorithm can obtain more detailed information and clearer infrared target fusion results than the traditional multiscale transform methods. Compared with the state-of-the-art fusion methods based on sparse representation, the proposed algorithm is simple and efficacious, and the time consumption is significantly reduced.
文摘针对地图综合中建筑多边形化简方法依赖人工规则、自动化程度低且难以利用已有化简成果的问题,本文提出了一种基于Transformer机制的建筑多边形化简模型。该模型首先把建筑多边形映射至一定范围的网格空间,将建筑多边形的坐标串表达为网格序列,从而获取建筑多边形化简前后的Token序列,构建出建筑多边形化简样本对数据;随后采用Transformer架构建立模型,基于样本数据利用模型的掩码自注意力机制学习点序列之间的依赖关系,最终逐点生成新的简化多边形,从而实现建筑多边形的化简。在训练过程中,模型使用结构化的样本数据,设计了忽略特定索引的交叉熵损失函数以提升化简质量。试验设计包括主试验与泛化验证两部分。主试验基于洛杉矶1∶2000建筑数据集,分别采用0.2、0.3和0.5 mm 3种网格尺寸对多边形进行编码,实现了目标比例尺为1∶5000与1∶10000的化简。试验结果表明,在0.3 mm的网格尺寸下模型性能最优,验证集上的化简结果与人工标注的一致率超过92.0%,且针对北京部分区域的建筑多边形数据的泛化试验验证了模型的迁移能力;与LSTM模型的对比分析显示,在参数规模相近的条件下,LSTM模型无法形成有效收敛,并生成可用结果。本文证实了Transformer在处理空间几何序列任务中的潜力,且能够有效复用已有化简样本,为智能建筑多边形化简提供了具有工程实用价值的途径。
