Backfill is routinely adopted as a ground support measure for underground mines.However,ground stability enhancement by backfill has received limited research attention.This is likely to be because of the conventional...Backfill is routinely adopted as a ground support measure for underground mines.However,ground stability enhancement by backfill has received limited research attention.This is likely to be because of the conventional assumption that the fill material exhibits a significantly lower stiffness than the host rocks.Significantly,a recent pioneering work revealed the time-dependent ground stability around a backfilled stope with vertical walls through numerical modeling.In practice,underground stopes typically exhibit a higher or lower degree of inclination.This alters the stress state in peripheral rocks and may induce severe instability and dilution,particularly in stope-hanging walls.Hence,it is imperative to analyze the time-dependent ground stability of inclined backfilled stopes for backfill structure design.Therefore,comprehensive numerical simulations were performed using FLAC3D to address this knowledge deficiency by incorporating a coupled analysis of the backfill consolidation behavior and long-term creep deformation in surrounding rocks.The ground stability was evaluated based on the confinement effectiveness,strength-stress ratio,stress path relative to the yield surface,and time-dependent stress redistribution in the rocks.A parametric study revealed that the inclination angle of the backfilled stope reduced the confinement effectiveness in the host rocks when the wall creep was minor.This exacerbated the rock mass sloughing potential.However,a backfilled stope with a shallower dip angle achieved superior ground stability enhancement when the creep deformation was substantial,by applying a more significant compression on the backfill and effectively mobilizing its passive support performance during consolidation.Additional simulations were conducted to analyze the effects of stope height and width,mine depth,mechanical properties of rocks,backfill compressibility,and filling gap on the time-dependent stress redistribution and stability around the inclined backfilled stope.展开更多
In deep coal mining,surrounding rock is subjected to both high in-situ stress and intense mining disturbances,leading to significant time-dependent behavior.Accurately capturing this behavior is essential for predicti...In deep coal mining,surrounding rock is subjected to both high in-situ stress and intense mining disturbances,leading to significant time-dependent behavior.Accurately capturing this behavior is essential for predicting long-term roadway stability,necessitating the development of a reliable constitutive creep model and numerical simulation approach.In this study,creep experiments were conducted on pre-damaged rock with varying initial damage levels to investigate the time-dependent mechanical properties.Based on the experimental results,an accelerated-creep criterion was proposed,and an elastic-viscoplastic creep damage model(EVPCD)was established that simultaneously considers the effects of time-dependent damage and instantaneous damage caused by stress disturbances on rock creep behavior.Subsequently,the effectiveness of the proposed creep model was verified using experimental data,and the secondary development of the EVPCD model was completed based on the FLAC3D platform.Following this,a long-term stability analysis method of deep surrounding rock that accounts for excavation-and mining-induced disturbances was proposed.Using the main roadway of Xutuan Coal Mine as a case study,numerical simulations were carried out to investigate the time-dependent deformation and failure characteristics of the surrounding rock following excavation and mining disturbance.Combined with on-site monitoring of the surrounding rock damage areas,the results indicate that the EVPCD outperforms the CVISC and Nishihara models in predicting the time-dependent behavior of deep surrounding rock.展开更多
A multi-stage stress relaxation test was performed on a granodiorite sample to understand the deformation process prior to the macroscopic failure of brittle rocks,as well as the transient response during stress relax...A multi-stage stress relaxation test was performed on a granodiorite sample to understand the deformation process prior to the macroscopic failure of brittle rocks,as well as the transient response during stress relaxation.Distributed optical fiber sensing was used to measure strains across the sample surface by helically wrapping the single-mode fiber around the cylindrical sample.Close agreement was observed between the circumferential strains obtained from the optical fibers and the extensometer.The reconstructed full-field strain contours show strain heterogeneity from the crack closure phase,and the strains in the later deformation phase are dominantly localized within the former high-strain zone.The Gini coefficient was used to quantify the degree of strain localization and shows an initial increase during the crack closure phase,a decrease during the linear elastic phase,and a subsequent increase during the post-yielding phase.This behavior corresponds to a process of initial localization from an imperfect boundary condition,homogenization,and eventual relocalization prior to the macroscopic failure of the sample.The transient strain rate decay during the stress relaxation phase was quantified using the p-value in the“Omori-like"power law function.A higher initial stress at the onset of relaxation results in a lower p-value,indicating a slower strain rate decay.As the sample approaches macroscopic failure,the lowest p-value shifts from the most damaged zone to adjacent areas,suggesting stress redistribution or crack propagation in deformed crystalline rocks under stress relaxation conditions.展开更多
In-situ stress is a key parameter for underground mine design and rock stability analysis.The borehole overcoring technique is widely used for in-situ stress measurement,but the rheological recovery deformation of roc...In-situ stress is a key parameter for underground mine design and rock stability analysis.The borehole overcoring technique is widely used for in-situ stress measurement,but the rheological recovery deformation of rocks after stress relief introduces errors.To improve accuracy,this study proposes an in-situ stress solution theory that incorporates time-dependent stress relief effects.Triaxial stepwise loadingunloading rheological tests on granite and siltstone established quantitative relationships between instantaneous elastic recovery and viscoelastic recovery under different stress levels,confirming their impact on measurement accuracy.By integrating a dual-class elastic deformation recovery model,an improved in-situ stress solution theory was derived.Additionally,accounting for the nonlinear characteristics of rock masses,a determination method for time-dependent nonlinear mechanical parameters was proposed.Based on the CSIRO hollow inclusion strain cell,time-dependent strain correction equations and long-term confining pressure calibration equations were formulated.Finally,the proposed theory was successfully applied at one iron mine(736 m depth)in Xinjiang,China,and one coal mine(510 m depth)in Ningxia,China.Compared to classical theory,the calculated mean stress values showed accuracy improvements of 6.0%and 9.4%,respectively,validating the applicability and reliability of the proposed theory.展开更多
Catastrophic failure in engineering structures of island reefs would occur when the tertiary creep initiates in coral reef limestone with a transition from short-to long-term load.Due to the complexity of biological s...Catastrophic failure in engineering structures of island reefs would occur when the tertiary creep initiates in coral reef limestone with a transition from short-to long-term load.Due to the complexity of biological structures,the underlying micro-behaviors involving time-dependent deformation are poorly understood.For this,an abnormal phenomenon was observed where the axial and lateral creep deformations were mutually independent by a series of triaxial tests under constant stress and strain rate conditions.The significantly large lateral creep deformation implies that the creep process cannot be described in continuum mechanics regime.Herein,it is hypothesized that sliding mechanism of crystal cleavages dominates the lateral creep deformation in coral reef limestone.Then,approaches of polarizing microscope(PM)and scanning electronic microscope(SEM)are utilized to validate the hypothesis.It shows that the sliding behavior of crystal cleavages combats with conventional creep micro-mechanisms at certain condition.The former is sensitive to time and strain rate,and is merely activated in the creep regime.展开更多
With respect to oceanic fluid dynamics,certain models have appeared,e.g.,an extended time-dependent(3+1)-dimensional shallow water wave equation in an ocean or a river,which we investigate in this paper.Using symbolic...With respect to oceanic fluid dynamics,certain models have appeared,e.g.,an extended time-dependent(3+1)-dimensional shallow water wave equation in an ocean or a river,which we investigate in this paper.Using symbolic computation,we find out,on one hand,a set of bilinear auto-Backlund transformations,which could connect certain solutions of that equation with other solutions of that equation itself,and on the other hand,a set of similarity reductions,which could go from that equation to a known ordinary differential equation.The results in this paper depend on all the oceanic variable coefficients in that equation.展开更多
The field of diffusion micro structural magnetic resonance(MR)aims to probe timedependent diffusion,i.e.,an ensemble-averaged mean-squared displacement that is not linear in time.This time-dependence contains rich inf...The field of diffusion micro structural magnetic resonance(MR)aims to probe timedependent diffusion,i.e.,an ensemble-averaged mean-squared displacement that is not linear in time.This time-dependence contains rich information about the surrounding microenvironment.MR methods to measure time-dependent diffusion quantitatively,however,require either non-standard pulse sequences,such as oscillating gradients,or make non-physical assumptions,such as infinitely narrow gradient pulses.Here,we argue that standard spin echo and stimulated echo MR sequences can be used to probe directly.In particular,we propose a framework in which the log-signal ratio obtained from a pair of measurements with different inter-pulse spacingΔis proportional to the MSD between these twoΔvalues along the gradient direction x:-.The framework is quantitative for short,finite-duration gradient pulses and under the Gaussian phase approximation(GPA).To validate the framework,we consider onedimensional diffusion between impermeable,parallel planes,as well as periodicallyspaced,permeable planes.Excellent agreement is obtained between the estimation and the ground truth in the regime where the GPA is expected to hold.Importantly,the GPA can be made to hold for any underlying microstructure,making the proposed framework widely applicable.展开更多
This article first outlines the fundamental definitions of Mycoplasma pneumoniae and the basic principles of antibiotics. It then analyzes and discusses the progress in antibiotic application and time-eff ect studies ...This article first outlines the fundamental definitions of Mycoplasma pneumoniae and the basic principles of antibiotics. It then analyzes and discusses the progress in antibiotic application and time-eff ect studies for neonatal pneumonia treatment, specifically comparing conventional antibiotic therapy with stepwise treatment regimens, and contrasting monotherapy with penicillin, monotherapy with cephalosporins, and combination therapy. Finally, it offers a prospective outlook on antibiotic application and time-effect research in neonatal pneumonia treatment, aiming to provide valuable reference for further scholarly investigations.展开更多
Heat transfers at the interface of adjacent saturated soil primarily through the soil particles and the water in the voids.The presence of water induces the contraction of heat flow lines at the interface,leading to t...Heat transfers at the interface of adjacent saturated soil primarily through the soil particles and the water in the voids.The presence of water induces the contraction of heat flow lines at the interface,leading to the emergence of the thermal contact resistance effect.In this paper,four thermal contact models were developed to predict the thermal contact resistance at the interface of multilayered saturated soils.Based on the theory of thermal-hydro-mechanical coupling,semi-analytical solutions of thermal consolidation subjected to time-dependent heating and loading were obtained by employing Laplace transform and its inverse transformation.Thermal consolidation characteristics of multilayered saturated soils under four different thermal contact models were discussed,and the effects of thermal resistance coefficient,partition thermal contact coefficient,and temperature amplitude on the thermal consolidation process were investigated.The outcomes indicate that the general thermal contact model results in the most pronounced thermal gradient at the interface,which can be degenerated to the other three thermal contact models.The perfect thermal contact model overestimates the deformation of the saturated soil during the thermal consolidation.Moreover,the effect of temperature on consolidation properties decreases gradually with increasing interfacial contact thermal resistance.展开更多
The Zagros Basin in southwestern Iran is a significant source of coal,with numerous coal mines operating in the region.Ensuring the stability of coal mines is crucial for safe and efficient mining operations.This stud...The Zagros Basin in southwestern Iran is a significant source of coal,with numerous coal mines operating in the region.Ensuring the stability of coal mines is crucial for safe and efficient mining operations.This study investigates the time-varying response of rocks and roof resistance in coal mines in the Zagros Mountains using a novel approach that combines numerical simulation,relaxation testing,and rock displacement studies.The results show that rocks exhibit significant time-dependent behavior,with changes in rock mechanical properties over time.A comprehensive viscoelastic-plastic model is devel-oped to accurately describe the time-varying strain-softening response of rocks and simulate laboratory tests.The model integrates the Burgers and strain-softening models,simulating stress relaxation curves and rock displacement over time.The study reveals that the rock mass displays significant nonlinear behavior,with changes in rock mechanical properties over time.The findings of this study highlight the importance of considering the time-varying response of rocks and roof resistance in coal mine stability analysis.The results provide valuable insights into the time-dependent behavior of rock mass in coal mines in Iran,which can inform mining practices and mitigate potential hazards.Results in this study can contribute to developing strategies for improving roof stability and reducing the likelihood of roof collapses.展开更多
A RadioFrequency Quadrupole(RFQ)cooler-buncher system was developed and implemented in a collinear laser spectroscopy setup.This system converts a continuous ion beam into short bunches while enhancing the beam qualit...A RadioFrequency Quadrupole(RFQ)cooler-buncher system was developed and implemented in a collinear laser spectroscopy setup.This system converts a continuous ion beam into short bunches while enhancing the beam quality and reducing the energy spread.The functionality of the RFQ cooler buncher was verified through offline tests with stable rubidium and indium beams delivered from a surface ion source and a laser ablation ion source,respectively.Bunched ion beams with a full width at half maximum of approximately 2μs in the time-of-flight spectrum were successfully achieved with a transmission efficiency exceeding 60%.The implementation of the RFQ cooler-buncher system also significantly improved the overall transmission efficiency of the collinear laser spectroscopy setup.展开更多
We present a fully time-dependent quantum wave packet evolution method for investigating molecular dynamics in intense laser fields.This approach enables the simultaneous treatment of interactions among multiple elect...We present a fully time-dependent quantum wave packet evolution method for investigating molecular dynamics in intense laser fields.This approach enables the simultaneous treatment of interactions among multiple electronic states while simultaneously tracking their time-dependent electronic,vibrational,and rotational dynamics.As an illustrative example,we consider neutral H_(2)molecules and simulate the laser-induced excitation dynamics of electronic and rotational states in strong laser fields,quantitatively distinguishing the respective contributions of electronic dipole transitions(within the classical-field approximation)and non-resonant Raman processes to the overall molecular dynamics.Furthermore,we precisely evaluate the relative contributions of direct tunneling ionization from the ground state and ionization following electronic excitation in the strong-field ionization of H_(2).The developed methodology shows strong potential for performing high-precision theoretical simulations of electronic-vibrational-rotational state excitations,ionization,and dissociation dynamics in molecules and their ions under intense laser fields.展开更多
In recent years,numerous recurrent neural network(RNN)models have been reported for solving time-dependent nonlinear optimization problems.However,few existing RNN models simultaneously involve nonlinear equality cons...In recent years,numerous recurrent neural network(RNN)models have been reported for solving time-dependent nonlinear optimization problems.However,few existing RNN models simultaneously involve nonlinear equality constraints,direct discretization,and noise suppression.This limitation presents challenges when existing models are applied to practical engineering problems.Additionally,most current discrete-time RNN models are derived from continuous-time models,which may not perform well for solving essentially discrete problems.To handle these issues,a robust direct-discretized RNN(RDD-RNN)model is proposed to efficiently realize time-dependent optimization constrained by nonlinear equalities(TDOCNE)in the presence of various time-dependent noises.Theoretical analyses are provided to reveal that the proposed RDD-RNN model possesses excellent convergence and noise-suppressing capability.Furthermore,numerical experiments and manipulator control instances are conducted and analyzed to validate the superior robustness of the proposed RDD-RNN model under various time-dependent noises,particularly quadratic polynomial noise.Eventually,small target detection experiments further demonstrate the practicality of the RDD-RNN model in image processing applications.展开更多
The Savitzky-Golay(SG)filter,which employs polynomial least-squares approximations to smooth data and estimate derivatives,is widely used for processing noisy data.However,noise suppression by the SG filter is recogni...The Savitzky-Golay(SG)filter,which employs polynomial least-squares approximations to smooth data and estimate derivatives,is widely used for processing noisy data.However,noise suppression by the SG filter is recognized to be limited at data boundaries and high frequencies,which can significantly reduce the signal-to-noise ratio(SNR).To solve this problem,a novel method synergistically integrating Principal Component Analysis(PCA)with SG filtering is proposed in this paper.This approach avoids the is-sue of excessive smoothing associated with larger window sizes.The proposed PCA-SG filtering algorithm was applied to a CO gas sensing system based on Cavity Ring-Down Spectroscopy(CRDS).The perform-ance of the PCA-SG filtering algorithm is demonstrated through comparison with Moving Average Filtering(MAF),Wavelet Transformation(WT),Kalman Filtering(KF),and the SG filter.The results demonstrate that the proposed algorithm exhibits superior noise reduction capabilities compared to the other algorithms evaluated.The SNR of the ring-down signal was improved from 11.8612 dB to 29.0913 dB,and the stand-ard deviation of the extracted ring-down time constant was reduced from 0.037μs to 0.018μs.These results confirm that the proposed PCA-SG filtering algorithm effectively improves the smoothness of the ring-down curve data,demonstrating its feasibility.展开更多
Exploring cost-effective and efficient catalysts for oxygen reduction reaction(ORR)poses a significant challenge,espe-cially in the pursuit of alternatives to precious metals like platinum.Significant advancements hav...Exploring cost-effective and efficient catalysts for oxygen reduction reaction(ORR)poses a significant challenge,espe-cially in the pursuit of alternatives to precious metals like platinum.Significant advancements have driven electrochem-ists to develop efficient ORR catalysts using abundant materials,particularly iron(Fe)-based,known for their exceptional performance in ORR.While the crucial function of Fe in boosting ORR catalytic activity is recognized,the connection between material attributes and catalytic performance remains enigmatic.Understanding the dynamic processes involved in oxygen electrocatalysis is paramount for designing precious-metals-free ORR electrocatalysts.Mössbauer spectroscopy stands out as a powerful technique for deciphering the structural characteristics of Fe species in catalysis,facilitating the identification of active sites and the clarification of catalytic mechanisms.By showcasing noteworthy case studies within this review,we demonstrate the application of in-situ/operando 57Fe Mössbauer spectroscopy across diverse Fe-involved materials in ORR catalysis.This sheds light on various aspects of ORR catalysis,such as identifying active sites,assessing stability,and understanding the reaction mechanism.Our inquiry drives towards the opportunities and hurdles associ-ated with Mössbauer spectroscopy,unveiling potential breakthroughs and avenues for enhancement within this pivotal research realm.展开更多
This paper describes the design and performance of the tender energy spectroscopy beamline(BL16U1),a phase Ⅱ beamline,at the Shanghai Synchrotron Radiation Facility.The beamline,based on an in-vacuum undulator source...This paper describes the design and performance of the tender energy spectroscopy beamline(BL16U1),a phase Ⅱ beamline,at the Shanghai Synchrotron Radiation Facility.The beamline,based on an in-vacuum undulator source with 26 mm period,provides an operable energy range between 2.1 keV and 16 keV,covering the K-edges of P to Rb and L3-edges of Zr to Bi.The principal optical elements of the beamline are a toroidal mirror,a liquid nitrogen-cooled double-crystal monochromator,a high-harmonic-rejection mirror,and two pairs of Kirkpatrick–Baez(KB)mirrors.Three end-stations,including non-focusing,microprobe,and sub-microprobe types,are installed on the beamline.X-ray fluorescence(XRF)and X-ray absorption spectroscopy(XAS),including X-ray absorption near-edge structure(XANES)and extended X-ray absorption fine structure(EXAFS),are performed under vacuum or He atmosphere at the non-focusing end-station(with a beam spot size of∼670μm×710μm).Using two KB mirrors systems,micro-XRF(μXRF)mapping and micro-XANES(μXANES)studies can be performed with a spot size of approximately∼3.3μm×1.3μm at the microprobe end-station and with a smaller spot size of∼0.5μm×0.25μm at the sub-microprobe end-station.The non-focusing end-station was officially opened to users in January 2024.The microprobe and sub-microprobe end-stations will be opened to users in the near future.This paper presents the characteristics,short-term technical developments,and early experimental results of this new beamline.展开更多
Optical monitoring of fireballs can provide reconstructions of luminous trajectories and the derivation of heliocentric orbits,whereas spectral observations are able to supply information from an entirely different pe...Optical monitoring of fireballs can provide reconstructions of luminous trajectories and the derivation of heliocentric orbits,whereas spectral observations are able to supply information from an entirely different perspective,with composition and material data.Observing and analyzing a fireball by using both methods enables a complete characterization of its meteorite properties.We simultaneously collected luminous and spectral observations of fireballs through observation networks established in eastern China and the Western Cape of South Africa.The optical observations utilized 180°×180°fisheye cameras,whereas spectral data were recorded by fixing gratings in front of each camera lens on the Allsky7 instrument so that both could monitor fireballs within an all-sky field of view.The spectra had an effective resolution of R=200.During the first year of operation,the network detected spectra from 150 fireballs,most of which recognized at least Mg I and Na I emission lines,and both the spectra and trajectory were recorded for some.Preliminary analysis of four bright fireballs indicated they could be categorized as asteroidal orbits or Halley-type cometary orbits,with spectra classified as normal,Fe-rich,iron,and Na-poor,respectively.One Halley-type fireball belonged to the Perseid meteor shower.For the two fireballs on asteroid-like orbits,orbital comparisons with known near-Earth asteroids were performed using multiple D-criteria(orbital similarity functions).Under the D_(N)criterion,SAFB20250713(iron type)showed a loose possible match with 2021 BD,whereas JsFB20250110(Fe-rich type)exhibited a closer potential similarity with 2017 BK(D_(N)=0.03).Overall,the orbital comparison indicated possible associations but no definitive parent bodies,whereas the spectral characteristics were broadly consistent with the asteroid-like or comet-like nature implied by their orbital classes.展开更多
In this paper,a fast step heterodyne light-induced thermoelastic spectroscopy(SH-LITES)sensor using a high-frequency quartz tuning fork(QTF)with resonant frequency of~100 kHz is reported for the first time.The theoret...In this paper,a fast step heterodyne light-induced thermoelastic spectroscopy(SH-LITES)sensor using a high-frequency quartz tuning fork(QTF)with resonant frequency of~100 kHz is reported for the first time.The theoretical principle of heterodyne LITES(H-LITES)signal generation is analyzed firstly,and an acetylene(C_(2)H_(2))H-LITES sensor is established to verify its performance.Experimental comparisons between the high-frequency QTF and a standard commercial QTF with resonant frequency of~32.768 kHz reveal that the high-frequency QTF exhibits a tenfold faster response time.Specifically,the H-LITES sensor with this QTF achieves a 33 ms measurement cycle,90%shorter than commercial counterparts.Furthermore,The SH-LITES technique is proposed to further shorten the scanning time to 15 ms,which achieves the shortest LITES measurement time known to date.To demonstrate its advantages in dynamic gas detection,an H_(2)O-LITES system integrating both QTF types is constructed for real-time monitoring of H_(2)O concentration during different respiration patterns.Comparative measurements show that the SH-LITES more accurately captures dynamic H_(2)O concentration fluctuations during respiration,outperforming the commercial QTF-based H-LITES sensor in rapid response scenarios.展开更多
The increasing power density of chips poses a significant challenge in the form of material aging for aluminumfilled polydimethylsiloxane(Al/PDMS)composites,which are widely used in thermal interface materials.Despite...The increasing power density of chips poses a significant challenge in the form of material aging for aluminumfilled polydimethylsiloxane(Al/PDMS)composites,which are widely used in thermal interface materials.Despite the growing importance of this issue,the specific mechanisms behind the interfacial aging process remain elusive,hindering a comprehensive grasp of the aging dynamics in these composites.In our research,we have developed an in-situ Raman aging monitoring system that leverages the non-contact and high-resolution capabilities of Raman spectroscopy to study the interface aging process.Our findings indicate a notable decrease in the intensity of the Raman peak as further cross-linking of the molecules during aging,with the most pronounced decline occurring at the interface between aluminum and PDMS.This insight could potentially elucidate why the interface in composite materials is frequently the site of failure during aging.Our study offers a versatile methodology for investigating the interfacial aging of polymer composites,contributing to a broader understanding of the interface behavior in composite materials at the molecular level.展开更多
The formation of copper deposits is closely related to hydrothermal processes.Understanding the migration of copper in hydrothermal fluids aids in reconstructing mineralization processes and deciphering deposit genesi...The formation of copper deposits is closely related to hydrothermal processes.Understanding the migration of copper in hydrothermal fluids aids in reconstructing mineralization processes and deciphering deposit genesis.Copper primarily exists as Cu^(+)and Cu^(2+)in hydrothermal solutions,with redox conditions governing their interconversion.In chloride-rich geological fluids,Cu-Cl complexes are considered critical for copper transport.However,the specific types and valence transitions of Cu-Cl complexes under varying hydrothermal conditions remain poorly understood.This study employed in situ Raman spectroscopy to systematically analyze Cu+HCl and CuCl_(2)+K_(2)S_(2)O_(3)/H_(2) systems under saturated vapor pressure at 25-300℃,elucidating the effects of temperature,Cl^(-)concentration,and redox conditions on copper speciation.In the Cu^(+)HCl system,copper dissolved as monovalent Cu-Cl complexes.At high temperatures(>200℃),[CuCl_(2)]^(-)is the dominated species,whereas[CuCl_(3)]^(2-)becomes prevalent at lower temperatures and higher HCl concentrations.For the Cu^(2+)-Cl system,the dominant species transitioned from[Cu(H_(2)O)n]^(2+)(<50℃)to[CuCl_(4)]^(2-)(100℃)and further to[CuCl]^(+)and[CuCl_(2)]^(0) at 300℃.The introduction of reducing agents(K_(2)S_(2)O_(3)/H_(2))facilitated Cu^(2+)→Cu^(+)reduction,thereby stabilizing Cu^(+)-Cl complexes and inducing partial copper precipitation.The behavior of copper in chloriderich hydrothermal fluids observed in this study indicates that high-temperature oxidizing fluids facilitate Cu mobilization,while cooling and redox changes promote deposition and ore minerals formation.展开更多
基金funding support from the National Natural Science Foundation of China(Nos.52304101 and 52204153)the China Postdoctoral Science Foundation(No.2023MD734215)+2 种基金the Youth Talent Support Program of Xi’an Association for Science and Technology(No.959202413070)the Key Research and Development Program of Shaanxi(No.2023-LL-QY-07)the Key Research and Development Program of Zhejiang(No.2023C03182).
文摘Backfill is routinely adopted as a ground support measure for underground mines.However,ground stability enhancement by backfill has received limited research attention.This is likely to be because of the conventional assumption that the fill material exhibits a significantly lower stiffness than the host rocks.Significantly,a recent pioneering work revealed the time-dependent ground stability around a backfilled stope with vertical walls through numerical modeling.In practice,underground stopes typically exhibit a higher or lower degree of inclination.This alters the stress state in peripheral rocks and may induce severe instability and dilution,particularly in stope-hanging walls.Hence,it is imperative to analyze the time-dependent ground stability of inclined backfilled stopes for backfill structure design.Therefore,comprehensive numerical simulations were performed using FLAC3D to address this knowledge deficiency by incorporating a coupled analysis of the backfill consolidation behavior and long-term creep deformation in surrounding rocks.The ground stability was evaluated based on the confinement effectiveness,strength-stress ratio,stress path relative to the yield surface,and time-dependent stress redistribution in the rocks.A parametric study revealed that the inclination angle of the backfilled stope reduced the confinement effectiveness in the host rocks when the wall creep was minor.This exacerbated the rock mass sloughing potential.However,a backfilled stope with a shallower dip angle achieved superior ground stability enhancement when the creep deformation was substantial,by applying a more significant compression on the backfill and effectively mobilizing its passive support performance during consolidation.Additional simulations were conducted to analyze the effects of stope height and width,mine depth,mechanical properties of rocks,backfill compressibility,and filling gap on the time-dependent stress redistribution and stability around the inclined backfilled stope.
基金funded by the National Natural Science Foundation of China(Nos.52004098,U24B2041,and 52274079)the Key Research and Development Program of Henan Province(No.251111320400)+1 种基金the Key Research Project Plan for Higher Education Institutions in Henan Province(Nos.24A570006 and 25A570002)the Scientific and Technological Research Project in Henan Province(No.242102320061).
文摘In deep coal mining,surrounding rock is subjected to both high in-situ stress and intense mining disturbances,leading to significant time-dependent behavior.Accurately capturing this behavior is essential for predicting long-term roadway stability,necessitating the development of a reliable constitutive creep model and numerical simulation approach.In this study,creep experiments were conducted on pre-damaged rock with varying initial damage levels to investigate the time-dependent mechanical properties.Based on the experimental results,an accelerated-creep criterion was proposed,and an elastic-viscoplastic creep damage model(EVPCD)was established that simultaneously considers the effects of time-dependent damage and instantaneous damage caused by stress disturbances on rock creep behavior.Subsequently,the effectiveness of the proposed creep model was verified using experimental data,and the secondary development of the EVPCD model was completed based on the FLAC3D platform.Following this,a long-term stability analysis method of deep surrounding rock that accounts for excavation-and mining-induced disturbances was proposed.Using the main roadway of Xutuan Coal Mine as a case study,numerical simulations were carried out to investigate the time-dependent deformation and failure characteristics of the surrounding rock following excavation and mining disturbance.Combined with on-site monitoring of the surrounding rock damage areas,the results indicate that the EVPCD outperforms the CVISC and Nishihara models in predicting the time-dependent behavior of deep surrounding rock.
基金support of her postdoctoral research at the GFZ Helmholtz Centre for Geosciences.P.Pan acknowledges the financial support of the National Natural Science Foundation of China(Grant No.52339001)H.Hofmann and Y.Ji acknowledge the financial support of the Helmholtz Association's Initiative and Networking Fund for the Helmholtz Young Investigator Group ARES(contract number VH-NG-1516).
文摘A multi-stage stress relaxation test was performed on a granodiorite sample to understand the deformation process prior to the macroscopic failure of brittle rocks,as well as the transient response during stress relaxation.Distributed optical fiber sensing was used to measure strains across the sample surface by helically wrapping the single-mode fiber around the cylindrical sample.Close agreement was observed between the circumferential strains obtained from the optical fibers and the extensometer.The reconstructed full-field strain contours show strain heterogeneity from the crack closure phase,and the strains in the later deformation phase are dominantly localized within the former high-strain zone.The Gini coefficient was used to quantify the degree of strain localization and shows an initial increase during the crack closure phase,a decrease during the linear elastic phase,and a subsequent increase during the post-yielding phase.This behavior corresponds to a process of initial localization from an imperfect boundary condition,homogenization,and eventual relocalization prior to the macroscopic failure of the sample.The transient strain rate decay during the stress relaxation phase was quantified using the p-value in the“Omori-like"power law function.A higher initial stress at the onset of relaxation results in a lower p-value,indicating a slower strain rate decay.As the sample approaches macroscopic failure,the lowest p-value shifts from the most damaged zone to adjacent areas,suggesting stress redistribution or crack propagation in deformed crystalline rocks under stress relaxation conditions.
基金supported by the National Science and Technology Major Project of the Ministry of Science and Technology of China(No.2024ZD1700201)the National Natural Science Foundation of China(Nos.U2034206,51974014 and 51574014)+1 种基金the Guangdong Basic and Applied Basic Research Foundation(No.2024A1515011631)the National Key Research and Development Project of China(No.2022YFC3004601)。
文摘In-situ stress is a key parameter for underground mine design and rock stability analysis.The borehole overcoring technique is widely used for in-situ stress measurement,but the rheological recovery deformation of rocks after stress relief introduces errors.To improve accuracy,this study proposes an in-situ stress solution theory that incorporates time-dependent stress relief effects.Triaxial stepwise loadingunloading rheological tests on granite and siltstone established quantitative relationships between instantaneous elastic recovery and viscoelastic recovery under different stress levels,confirming their impact on measurement accuracy.By integrating a dual-class elastic deformation recovery model,an improved in-situ stress solution theory was derived.Additionally,accounting for the nonlinear characteristics of rock masses,a determination method for time-dependent nonlinear mechanical parameters was proposed.Based on the CSIRO hollow inclusion strain cell,time-dependent strain correction equations and long-term confining pressure calibration equations were formulated.Finally,the proposed theory was successfully applied at one iron mine(736 m depth)in Xinjiang,China,and one coal mine(510 m depth)in Ningxia,China.Compared to classical theory,the calculated mean stress values showed accuracy improvements of 6.0%and 9.4%,respectively,validating the applicability and reliability of the proposed theory.
基金supported by the National Natural Science Foundation of China(Grant Nos.41877267,41877260)the Priority Research Program of the Chinese Academy of Science(Grant No.XDA13010201).
文摘Catastrophic failure in engineering structures of island reefs would occur when the tertiary creep initiates in coral reef limestone with a transition from short-to long-term load.Due to the complexity of biological structures,the underlying micro-behaviors involving time-dependent deformation are poorly understood.For this,an abnormal phenomenon was observed where the axial and lateral creep deformations were mutually independent by a series of triaxial tests under constant stress and strain rate conditions.The significantly large lateral creep deformation implies that the creep process cannot be described in continuum mechanics regime.Herein,it is hypothesized that sliding mechanism of crystal cleavages dominates the lateral creep deformation in coral reef limestone.Then,approaches of polarizing microscope(PM)and scanning electronic microscope(SEM)are utilized to validate the hypothesis.It shows that the sliding behavior of crystal cleavages combats with conventional creep micro-mechanisms at certain condition.The former is sensitive to time and strain rate,and is merely activated in the creep regime.
基金financially supported by the Scientific Research Foundation of North China University of Technology(Grant Nos.11005136024XN147-87 and 110051360024XN151-86).
文摘With respect to oceanic fluid dynamics,certain models have appeared,e.g.,an extended time-dependent(3+1)-dimensional shallow water wave equation in an ocean or a river,which we investigate in this paper.Using symbolic computation,we find out,on one hand,a set of bilinear auto-Backlund transformations,which could connect certain solutions of that equation with other solutions of that equation itself,and on the other hand,a set of similarity reductions,which could go from that equation to a known ordinary differential equation.The results in this paper depend on all the oceanic variable coefficients in that equation.
基金supported by the intramural research program(IRP)of the Eunice Kennedy Shriver National Institute of Child Health and Human Development。
文摘The field of diffusion micro structural magnetic resonance(MR)aims to probe timedependent diffusion,i.e.,an ensemble-averaged mean-squared displacement that is not linear in time.This time-dependence contains rich information about the surrounding microenvironment.MR methods to measure time-dependent diffusion quantitatively,however,require either non-standard pulse sequences,such as oscillating gradients,or make non-physical assumptions,such as infinitely narrow gradient pulses.Here,we argue that standard spin echo and stimulated echo MR sequences can be used to probe directly.In particular,we propose a framework in which the log-signal ratio obtained from a pair of measurements with different inter-pulse spacingΔis proportional to the MSD between these twoΔvalues along the gradient direction x:-.The framework is quantitative for short,finite-duration gradient pulses and under the Gaussian phase approximation(GPA).To validate the framework,we consider onedimensional diffusion between impermeable,parallel planes,as well as periodicallyspaced,permeable planes.Excellent agreement is obtained between the estimation and the ground truth in the regime where the GPA is expected to hold.Importantly,the GPA can be made to hold for any underlying microstructure,making the proposed framework widely applicable.
文摘This article first outlines the fundamental definitions of Mycoplasma pneumoniae and the basic principles of antibiotics. It then analyzes and discusses the progress in antibiotic application and time-eff ect studies for neonatal pneumonia treatment, specifically comparing conventional antibiotic therapy with stepwise treatment regimens, and contrasting monotherapy with penicillin, monotherapy with cephalosporins, and combination therapy. Finally, it offers a prospective outlook on antibiotic application and time-effect research in neonatal pneumonia treatment, aiming to provide valuable reference for further scholarly investigations.
基金Projects(U24B20113,42477162) supported by the National Natural Science Foundation of ChinaProject(2025C02228) supported by the Primary Research and Development Plan of Zhejiang Province,China。
文摘Heat transfers at the interface of adjacent saturated soil primarily through the soil particles and the water in the voids.The presence of water induces the contraction of heat flow lines at the interface,leading to the emergence of the thermal contact resistance effect.In this paper,four thermal contact models were developed to predict the thermal contact resistance at the interface of multilayered saturated soils.Based on the theory of thermal-hydro-mechanical coupling,semi-analytical solutions of thermal consolidation subjected to time-dependent heating and loading were obtained by employing Laplace transform and its inverse transformation.Thermal consolidation characteristics of multilayered saturated soils under four different thermal contact models were discussed,and the effects of thermal resistance coefficient,partition thermal contact coefficient,and temperature amplitude on the thermal consolidation process were investigated.The outcomes indicate that the general thermal contact model results in the most pronounced thermal gradient at the interface,which can be degenerated to the other three thermal contact models.The perfect thermal contact model overestimates the deformation of the saturated soil during the thermal consolidation.Moreover,the effect of temperature on consolidation properties decreases gradually with increasing interfacial contact thermal resistance.
文摘The Zagros Basin in southwestern Iran is a significant source of coal,with numerous coal mines operating in the region.Ensuring the stability of coal mines is crucial for safe and efficient mining operations.This study investigates the time-varying response of rocks and roof resistance in coal mines in the Zagros Mountains using a novel approach that combines numerical simulation,relaxation testing,and rock displacement studies.The results show that rocks exhibit significant time-dependent behavior,with changes in rock mechanical properties over time.A comprehensive viscoelastic-plastic model is devel-oped to accurately describe the time-varying strain-softening response of rocks and simulate laboratory tests.The model integrates the Burgers and strain-softening models,simulating stress relaxation curves and rock displacement over time.The study reveals that the rock mass displays significant nonlinear behavior,with changes in rock mechanical properties over time.The findings of this study highlight the importance of considering the time-varying response of rocks and roof resistance in coal mine stability analysis.The results provide valuable insights into the time-dependent behavior of rock mass in coal mines in Iran,which can inform mining practices and mitigate potential hazards.Results in this study can contribute to developing strategies for improving roof stability and reducing the likelihood of roof collapses.
基金supported by the National Natural Science Foundation of China(Nos.12027809,12350007)National Key R&D Program of China(Nos.2022YFA1605100,2023YFA1606403,and 2023YFE0101600)+1 种基金New Cornerstone Science Foundation through the XPLORER PRIZEfunding from the European Research Council(ERC)under the European Union’s Horizon 2020 research and innovation program under grant agreement No.679038.
文摘A RadioFrequency Quadrupole(RFQ)cooler-buncher system was developed and implemented in a collinear laser spectroscopy setup.This system converts a continuous ion beam into short bunches while enhancing the beam quality and reducing the energy spread.The functionality of the RFQ cooler buncher was verified through offline tests with stable rubidium and indium beams delivered from a surface ion source and a laser ablation ion source,respectively.Bunched ion beams with a full width at half maximum of approximately 2μs in the time-of-flight spectrum were successfully achieved with a transmission efficiency exceeding 60%.The implementation of the RFQ cooler-buncher system also significantly improved the overall transmission efficiency of the collinear laser spectroscopy setup.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFA1602502)the National Natural Science Foundation of China(Grant No.12450404)。
文摘We present a fully time-dependent quantum wave packet evolution method for investigating molecular dynamics in intense laser fields.This approach enables the simultaneous treatment of interactions among multiple electronic states while simultaneously tracking their time-dependent electronic,vibrational,and rotational dynamics.As an illustrative example,we consider neutral H_(2)molecules and simulate the laser-induced excitation dynamics of electronic and rotational states in strong laser fields,quantitatively distinguishing the respective contributions of electronic dipole transitions(within the classical-field approximation)and non-resonant Raman processes to the overall molecular dynamics.Furthermore,we precisely evaluate the relative contributions of direct tunneling ionization from the ground state and ionization following electronic excitation in the strong-field ionization of H_(2).The developed methodology shows strong potential for performing high-precision theoretical simulations of electronic-vibrational-rotational state excitations,ionization,and dissociation dynamics in molecules and their ions under intense laser fields.
基金supported in part by the National Key Research and Development Program of China(2023YFC3011100)the National Natural Science Foundation of China(62476294)+1 种基金the Science and Technology Planning Project of Guangdong Province,China(2021B1212040017)the Guangdong Basic and Applied Basic Research Foundation(2025A1515010377,2023A1515110697).
文摘In recent years,numerous recurrent neural network(RNN)models have been reported for solving time-dependent nonlinear optimization problems.However,few existing RNN models simultaneously involve nonlinear equality constraints,direct discretization,and noise suppression.This limitation presents challenges when existing models are applied to practical engineering problems.Additionally,most current discrete-time RNN models are derived from continuous-time models,which may not perform well for solving essentially discrete problems.To handle these issues,a robust direct-discretized RNN(RDD-RNN)model is proposed to efficiently realize time-dependent optimization constrained by nonlinear equalities(TDOCNE)in the presence of various time-dependent noises.Theoretical analyses are provided to reveal that the proposed RDD-RNN model possesses excellent convergence and noise-suppressing capability.Furthermore,numerical experiments and manipulator control instances are conducted and analyzed to validate the superior robustness of the proposed RDD-RNN model under various time-dependent noises,particularly quadratic polynomial noise.Eventually,small target detection experiments further demonstrate the practicality of the RDD-RNN model in image processing applications.
文摘The Savitzky-Golay(SG)filter,which employs polynomial least-squares approximations to smooth data and estimate derivatives,is widely used for processing noisy data.However,noise suppression by the SG filter is recognized to be limited at data boundaries and high frequencies,which can significantly reduce the signal-to-noise ratio(SNR).To solve this problem,a novel method synergistically integrating Principal Component Analysis(PCA)with SG filtering is proposed in this paper.This approach avoids the is-sue of excessive smoothing associated with larger window sizes.The proposed PCA-SG filtering algorithm was applied to a CO gas sensing system based on Cavity Ring-Down Spectroscopy(CRDS).The perform-ance of the PCA-SG filtering algorithm is demonstrated through comparison with Moving Average Filtering(MAF),Wavelet Transformation(WT),Kalman Filtering(KF),and the SG filter.The results demonstrate that the proposed algorithm exhibits superior noise reduction capabilities compared to the other algorithms evaluated.The SNR of the ring-down signal was improved from 11.8612 dB to 29.0913 dB,and the stand-ard deviation of the extracted ring-down time constant was reduced from 0.037μs to 0.018μs.These results confirm that the proposed PCA-SG filtering algorithm effectively improves the smoothness of the ring-down curve data,demonstrating its feasibility.
基金financially supported by the National Natural Science Foundation of China (22350410386,W2412116,22375200,U22A202175,21961142006)。
文摘Exploring cost-effective and efficient catalysts for oxygen reduction reaction(ORR)poses a significant challenge,espe-cially in the pursuit of alternatives to precious metals like platinum.Significant advancements have driven electrochem-ists to develop efficient ORR catalysts using abundant materials,particularly iron(Fe)-based,known for their exceptional performance in ORR.While the crucial function of Fe in boosting ORR catalytic activity is recognized,the connection between material attributes and catalytic performance remains enigmatic.Understanding the dynamic processes involved in oxygen electrocatalysis is paramount for designing precious-metals-free ORR electrocatalysts.Mössbauer spectroscopy stands out as a powerful technique for deciphering the structural characteristics of Fe species in catalysis,facilitating the identification of active sites and the clarification of catalytic mechanisms.By showcasing noteworthy case studies within this review,we demonstrate the application of in-situ/operando 57Fe Mössbauer spectroscopy across diverse Fe-involved materials in ORR catalysis.This sheds light on various aspects of ORR catalysis,such as identifying active sites,assessing stability,and understanding the reaction mechanism.Our inquiry drives towards the opportunities and hurdles associ-ated with Mössbauer spectroscopy,unveiling potential breakthroughs and avenues for enhancement within this pivotal research realm.
基金supported by the National Key R&D Program of China(No.2021YFA1601003)the financial support of the SSRF PhaseⅡproject.
文摘This paper describes the design and performance of the tender energy spectroscopy beamline(BL16U1),a phase Ⅱ beamline,at the Shanghai Synchrotron Radiation Facility.The beamline,based on an in-vacuum undulator source with 26 mm period,provides an operable energy range between 2.1 keV and 16 keV,covering the K-edges of P to Rb and L3-edges of Zr to Bi.The principal optical elements of the beamline are a toroidal mirror,a liquid nitrogen-cooled double-crystal monochromator,a high-harmonic-rejection mirror,and two pairs of Kirkpatrick–Baez(KB)mirrors.Three end-stations,including non-focusing,microprobe,and sub-microprobe types,are installed on the beamline.X-ray fluorescence(XRF)and X-ray absorption spectroscopy(XAS),including X-ray absorption near-edge structure(XANES)and extended X-ray absorption fine structure(EXAFS),are performed under vacuum or He atmosphere at the non-focusing end-station(with a beam spot size of∼670μm×710μm).Using two KB mirrors systems,micro-XRF(μXRF)mapping and micro-XANES(μXANES)studies can be performed with a spot size of approximately∼3.3μm×1.3μm at the microprobe end-station and with a smaller spot size of∼0.5μm×0.25μm at the sub-microprobe end-station.The non-focusing end-station was officially opened to users in January 2024.The microprobe and sub-microprobe end-stations will be opened to users in the near future.This paper presents the characteristics,short-term technical developments,and early experimental results of this new beamline.
基金supported by the Science and Technology Project of Qinghai Province(Grant No.2025-ZJ-T0)the National Key Research and Development Program of China(Grant No.2023YFE0109900)the Minor Planet Foundation of China.
文摘Optical monitoring of fireballs can provide reconstructions of luminous trajectories and the derivation of heliocentric orbits,whereas spectral observations are able to supply information from an entirely different perspective,with composition and material data.Observing and analyzing a fireball by using both methods enables a complete characterization of its meteorite properties.We simultaneously collected luminous and spectral observations of fireballs through observation networks established in eastern China and the Western Cape of South Africa.The optical observations utilized 180°×180°fisheye cameras,whereas spectral data were recorded by fixing gratings in front of each camera lens on the Allsky7 instrument so that both could monitor fireballs within an all-sky field of view.The spectra had an effective resolution of R=200.During the first year of operation,the network detected spectra from 150 fireballs,most of which recognized at least Mg I and Na I emission lines,and both the spectra and trajectory were recorded for some.Preliminary analysis of four bright fireballs indicated they could be categorized as asteroidal orbits or Halley-type cometary orbits,with spectra classified as normal,Fe-rich,iron,and Na-poor,respectively.One Halley-type fireball belonged to the Perseid meteor shower.For the two fireballs on asteroid-like orbits,orbital comparisons with known near-Earth asteroids were performed using multiple D-criteria(orbital similarity functions).Under the D_(N)criterion,SAFB20250713(iron type)showed a loose possible match with 2021 BD,whereas JsFB20250110(Fe-rich type)exhibited a closer potential similarity with 2017 BK(D_(N)=0.03).Overall,the orbital comparison indicated possible associations but no definitive parent bodies,whereas the spectral characteristics were broadly consistent with the asteroid-like or comet-like nature implied by their orbital classes.
基金financial supports from the National Natural Science Foundation of China(Grant No.62335006,62275065,624B2050,62022032,and 62405078)Open Subject of Hebei Key Laboratory of Advanced Laser Technology and Equipment(HBKL-ALTE2025001)+2 种基金Heilongjiang Postdoctoral Fund(Grant No.LBH-Z23144 and LBH-Z24155)Natural Science Foundation of Heilongjiang Province(Grant No.LH2024F031)China Postdoctoral Science Foundation(Grant No.2024M764172).
文摘In this paper,a fast step heterodyne light-induced thermoelastic spectroscopy(SH-LITES)sensor using a high-frequency quartz tuning fork(QTF)with resonant frequency of~100 kHz is reported for the first time.The theoretical principle of heterodyne LITES(H-LITES)signal generation is analyzed firstly,and an acetylene(C_(2)H_(2))H-LITES sensor is established to verify its performance.Experimental comparisons between the high-frequency QTF and a standard commercial QTF with resonant frequency of~32.768 kHz reveal that the high-frequency QTF exhibits a tenfold faster response time.Specifically,the H-LITES sensor with this QTF achieves a 33 ms measurement cycle,90%shorter than commercial counterparts.Furthermore,The SH-LITES technique is proposed to further shorten the scanning time to 15 ms,which achieves the shortest LITES measurement time known to date.To demonstrate its advantages in dynamic gas detection,an H_(2)O-LITES system integrating both QTF types is constructed for real-time monitoring of H_(2)O concentration during different respiration patterns.Comparative measurements show that the SH-LITES more accurately captures dynamic H_(2)O concentration fluctuations during respiration,outperforming the commercial QTF-based H-LITES sensor in rapid response scenarios.
基金supported by the National Natural Science Foundation of China(No.52303092)Talent Recruitment Project of Guangdong Province(No.2023QN10X078)+2 种基金Open Project of Yunnan Precious Metals Laboratory Co.,Ltd(No.YPML-2023050278)National Key R&D Project from Ministry of Science and Technology of China(No.2022YFA1203100)Shenzhen Science and Technology Research Funding(No.JCYJ20200109114401708)。
文摘The increasing power density of chips poses a significant challenge in the form of material aging for aluminumfilled polydimethylsiloxane(Al/PDMS)composites,which are widely used in thermal interface materials.Despite the growing importance of this issue,the specific mechanisms behind the interfacial aging process remain elusive,hindering a comprehensive grasp of the aging dynamics in these composites.In our research,we have developed an in-situ Raman aging monitoring system that leverages the non-contact and high-resolution capabilities of Raman spectroscopy to study the interface aging process.Our findings indicate a notable decrease in the intensity of the Raman peak as further cross-linking of the molecules during aging,with the most pronounced decline occurring at the interface between aluminum and PDMS.This insight could potentially elucidate why the interface in composite materials is frequently the site of failure during aging.Our study offers a versatile methodology for investigating the interfacial aging of polymer composites,contributing to a broader understanding of the interface behavior in composite materials at the molecular level.
基金jointly funded by the Strategic Priority Research Program of the Chinese Academy of Sciences(grant No.XDA0430301)the National Natural Science Foundation of China(grant Nos.42130109,41973059)。
文摘The formation of copper deposits is closely related to hydrothermal processes.Understanding the migration of copper in hydrothermal fluids aids in reconstructing mineralization processes and deciphering deposit genesis.Copper primarily exists as Cu^(+)and Cu^(2+)in hydrothermal solutions,with redox conditions governing their interconversion.In chloride-rich geological fluids,Cu-Cl complexes are considered critical for copper transport.However,the specific types and valence transitions of Cu-Cl complexes under varying hydrothermal conditions remain poorly understood.This study employed in situ Raman spectroscopy to systematically analyze Cu+HCl and CuCl_(2)+K_(2)S_(2)O_(3)/H_(2) systems under saturated vapor pressure at 25-300℃,elucidating the effects of temperature,Cl^(-)concentration,and redox conditions on copper speciation.In the Cu^(+)HCl system,copper dissolved as monovalent Cu-Cl complexes.At high temperatures(>200℃),[CuCl_(2)]^(-)is the dominated species,whereas[CuCl_(3)]^(2-)becomes prevalent at lower temperatures and higher HCl concentrations.For the Cu^(2+)-Cl system,the dominant species transitioned from[Cu(H_(2)O)n]^(2+)(<50℃)to[CuCl_(4)]^(2-)(100℃)and further to[CuCl]^(+)and[CuCl_(2)]^(0) at 300℃.The introduction of reducing agents(K_(2)S_(2)O_(3)/H_(2))facilitated Cu^(2+)→Cu^(+)reduction,thereby stabilizing Cu^(+)-Cl complexes and inducing partial copper precipitation.The behavior of copper in chloriderich hydrothermal fluids observed in this study indicates that high-temperature oxidizing fluids facilitate Cu mobilization,while cooling and redox changes promote deposition and ore minerals formation.
