期刊文献+
共找到20,597篇文章
< 1 2 250 >
每页显示 20 50 100
柠檬酸引入方式对CoMo/TiO2-Al2O3催化剂加氢脱硫性能的影响 被引量:9
1
作者 王广建 赵强 +2 位作者 陈国良 王建爽 石林 《工业催化》 CAS 2019年第7期54-60,共7页
采用改进溶胶-凝胶法制备的TiO2-Al2O3作复合载体,制备不同柠檬酸引入方式改性的CoMo/TiO2-Al2O3加氢脱硫催化剂。利用低温N2吸附-脱附、XRD、SEM和H2-TPR等对催化剂进行表征,并采用固定床反应器对催化剂加氢脱硫性能进行评价。结果表明... 采用改进溶胶-凝胶法制备的TiO2-Al2O3作复合载体,制备不同柠檬酸引入方式改性的CoMo/TiO2-Al2O3加氢脱硫催化剂。利用低温N2吸附-脱附、XRD、SEM和H2-TPR等对催化剂进行表征,并采用固定床反应器对催化剂加氢脱硫性能进行评价。结果表明,后处理法制备的催化剂比表面积相对较大,孔道结构较好,活性金属组分以无定形形态均匀分散在载体表面,一定程度上减弱了其与载体间的相互作用;该催化剂可以延缓Co硫化,并且络合生成较多易于硫化还原的Mo物种,利于MoS2在催化剂表面的堆叠,生成更多的Co-Mo-S(Ⅱ)活性相,因而相应的CoMo催化剂对噻吩加氢脱硫转化率显著提高。 展开更多
关键词 催化剂工程 tio2-al2o3催化剂 加氢脱硫 柠檬酸 噻吩
在线阅读 下载PDF
Ti(OBu)4/TiO2-Al2O3催化合成聚(己二酸-1,4-丁二醇)酯
2
作者 蔡国星 吾满江.艾力 张丽静 《应用化工》 CAS CSCD 2008年第6期667-669,共3页
用Ti(OBu)4/TiO2-Al2O3催化剂合成了聚(己二酸-1,4-丁二醇)酯。Ti(OBu)4/TiO2-Al2O3合成聚(己二酸-1,4丁二醇)酯的最佳反应条件:催化剂载体焙烧温度为750℃,焙烧时间为4h,催化剂加入量为1.5%,n(己二酸)/n(1,4-丁... 用Ti(OBu)4/TiO2-Al2O3催化剂合成了聚(己二酸-1,4-丁二醇)酯。Ti(OBu)4/TiO2-Al2O3合成聚(己二酸-1,4丁二醇)酯的最佳反应条件:催化剂载体焙烧温度为750℃,焙烧时间为4h,催化剂加入量为1.5%,n(己二酸)/n(1,4-丁二醇)=1:(1.2~1.3),反应温度为165~170℃,反应时间4h,在此条件下得到聚酯,酯化率为93.02%,Mn=3 080,Mn/Mw=1.206,催化剂可反复使用5次。 展开更多
关键词 Ti(oBu)4/tio2-al2o3 己二酸 1 4-丁二醇 聚酯 固载催化剂
在线阅读 下载PDF
光芬顿催化剂Cu-Fe/TiO2-Al2O3的制备及其对喹啉的降解研究 被引量:3
3
作者 张冉 尤宏 吴东海 《水处理技术》 CAS CSCD 北大核心 2015年第9期61-64,共4页
采用浸渍法制备Cu-Fe/Ti O2-Al2O3催化剂,探讨了制备过程中前驱液铜铁比例、焙烧温度、焙烧时间等对催化剂活性的影响,并考察了Cu-Fe/Ti O2-Al2O3催化光芬顿对喹啉废水的处理性能。结果表明,催化剂制备前驱液铜铁比例过高会抑制催化剂... 采用浸渍法制备Cu-Fe/Ti O2-Al2O3催化剂,探讨了制备过程中前驱液铜铁比例、焙烧温度、焙烧时间等对催化剂活性的影响,并考察了Cu-Fe/Ti O2-Al2O3催化光芬顿对喹啉废水的处理性能。结果表明,催化剂制备前驱液铜铁比例过高会抑制催化剂的活性,适量增加焙烧温度和焙烧时间有助于提高催化剂在光助非均相芬顿氧化体系中的催化性能。当前驱液Cu、Fe摩尔比1:5、焙烧温度200℃、焙烧时间5 h时所制备的催化剂性能为优。Cu-Fe/Ti O2-Al2O3可以拓宽光芬顿反应的p H范围,在中性条件(p H=6.7)下较Fe/Ti O2-Al2O3对喹啉的降解有较大提高,反应120 min后去除率分别为94%和58%。Cu-Fe/Ti O2-Al2O3在光芬顿体系中稳定性较好,可重复利用。表明Cu-Fe/Ti O2-Al2O3是一种具有应用前景的高效光芬顿催化剂。 展开更多
关键词 光芬顿 Cu-Fe/Ti o2-al2o3 喹啉 降解率 水处理
原文传递
Al2O3和TiO2-Al2O3催化剂的表面化学性质研究和探讨
4
作者 迟洪盘 唐昭峥 《石油与天然气化工》 CAS 1982年第4期19-23,共5页
关键词 AL2o3 tio2-al2o3催化剂 化学性质 研究 多相催化 表面性质
全文增补中
TiO2-Al2O3复合光催化剂的制备及光催化性能 被引量:1
5
作者 陈旺生 刘红 赵惠忠 《中国材料科技与设备》 2008年第2期38-41,共4页
以Ti(SO4)2、Al2(SO4)3·18H2O为原料,采用乙醇助水热法制备了Al2O3-TiO2复合光催化剂,并通过改变A1/Ti物质的量之比、乙醇的体积分数、水热反应温度和反应时间等得到材料制备的最佳条件。XRD分析表明样品中的TiO2以锐钛矿... 以Ti(SO4)2、Al2(SO4)3·18H2O为原料,采用乙醇助水热法制备了Al2O3-TiO2复合光催化剂,并通过改变A1/Ti物质的量之比、乙醇的体积分数、水热反应温度和反应时间等得到材料制备的最佳条件。XRD分析表明样品中的TiO2以锐钛矿晶相存在,SEM显示样品粒径范围在30-50nm之间。用最佳条件制备的复合光催化剂降解甲基橙溶液,反应30min后降解率这91%,降解过程符合一级动力学方程。 展开更多
关键词 Al2o3-tio2 复合材料 乙醇助水热法 光催化 甲基橙
在线阅读 下载PDF
Fe/Mg改性γ-Al_(2)O_(3)复合吸附剂硒吸附性能研究
6
作者 谷梦瑶 郭士豪 +3 位作者 樊昊天 刘皓 陈娟 姚洪 《燃烧科学与技术》 北大核心 2025年第4期435-442,共8页
通过浸渍法制备不同摩尔比的Fe/γ-Al_(2)O_(3)复合吸附剂及Mg/Al/Fe三元复合吸附剂,并在固定床上进行硒吸附实验.探讨400~700℃下Fe/γ-Al_(2)O_(3)吸附剂的吸附性能及H_(2)O浓度对两种吸附剂硒吸附特性的影响.结果表明,在500℃、8%H_(... 通过浸渍法制备不同摩尔比的Fe/γ-Al_(2)O_(3)复合吸附剂及Mg/Al/Fe三元复合吸附剂,并在固定床上进行硒吸附实验.探讨400~700℃下Fe/γ-Al_(2)O_(3)吸附剂的吸附性能及H_(2)O浓度对两种吸附剂硒吸附特性的影响.结果表明,在500℃、8%H_(2)O条件下,Fe/Al摩尔比为1∶10的吸附剂表现出最佳硒吸附性能,吸附量为10.968 mg/g,而Mg/Al/Fe吸附剂在20%H_(2)O条件下硒吸附性能最佳,吸附量为9.7606 mg/g.XPS结果显示,烟气中的SeO2与Mg/Al/Fe吸附剂表面的晶格氧结合,提高吸附剂表面的氧缺陷,从而改善吸附性能. 展开更多
关键词 Fe/γ-al_(2)o_(3)复合吸附剂 吸附性能 H_(2)o
在线阅读 下载PDF
Al_(2)O_(3)/TiO_(2)/Na_(2)O对石灰在炼钢渣中溶解的影响
7
作者 皮溅清 王明理 +3 位作者 张延玲 赵宏博 余阚 李更 《有色金属科学与工程》 北大核心 2025年第1期1-7,共7页
含有Al_(2)O_(3)、TiO_(2)、Na_(2)O组元的赤泥基熔剂对传统的炼钢渣系具有显著的助熔作用,研究炼钢炉渣中石灰的溶解机理及影响其溶解速率的因素,对促进炼钢中无氟熔剂的发展有很大意义。本实验采用圆柱旋转法测定了石灰在含Al_(2)O_(3... 含有Al_(2)O_(3)、TiO_(2)、Na_(2)O组元的赤泥基熔剂对传统的炼钢渣系具有显著的助熔作用,研究炼钢炉渣中石灰的溶解机理及影响其溶解速率的因素,对促进炼钢中无氟熔剂的发展有很大意义。本实验采用圆柱旋转法测定了石灰在含Al_(2)O_(3)、TiO_(2)、Na_(2)O的炼钢渣系中的溶解速率,对其熔化过程矿相变化进行分析论证。结果表明,在1400℃时,石灰溶解的促进系数按Na_(2)O>TiO_(2)>Al_(2)O_(3)的顺序下降,添加10%的Na_(2)O能使石灰溶解的促进系数提高7倍。此外文章探究了Al_(2)O_(3)、TiO_(2)、Na_(2)O对CaO在熔渣中的扩散以及边界层上石灰分解反应的影响,阐明了该条件下石灰的溶解机理。发现同时包含Al_(2)O_(3)/TiO_(2)/Na_(2)O的赤泥基熔剂可以作为合适的炼钢熔剂。 展开更多
关键词 石灰溶解 Al_(2)o_(3)/tio_(2)/Na_(2)o 炼钢渣
在线阅读 下载PDF
Na_(2)O-Al_(2)O_(3)-SiO_(2)微晶玻璃的研究进展
8
作者 赵志龙 田雪洁 +3 位作者 周泽云 韩金龙 赵志永 田英良 《玻璃搪瓷与眼镜》 2025年第8期47-55,共9页
在Na_(2)O-Al_(2)O_(3)-SiO_(2)(NAS)微晶玻璃中,常见晶相除了霞石晶体(NaAlSiO_(4)),还包含一些不含碱金属氧化物的晶相,这类晶相一定程度上可提高NAS微晶玻璃的力学性能,使其在光学、齿科、信息等领域具有潜在的应用价值。本文简要阐... 在Na_(2)O-Al_(2)O_(3)-SiO_(2)(NAS)微晶玻璃中,常见晶相除了霞石晶体(NaAlSiO_(4)),还包含一些不含碱金属氧化物的晶相,这类晶相一定程度上可提高NAS微晶玻璃的力学性能,使其在光学、齿科、信息等领域具有潜在的应用价值。本文简要阐述了NAS微晶玻璃的研究进展,介绍了NAS微晶玻璃的主晶相和其他衍生晶相的结构,探讨了玻璃的网络形成体、网络修饰体和晶核剂对NAS微晶玻璃析晶行为及性能的影响。最后,展望了NAS微晶玻璃的应用方向。本文对今后NAS微晶玻璃的研究具有一定的参考价值。 展开更多
关键词 钠铝硅微晶玻璃 网络形成体 网络修饰体 晶核剂 钠霞石
在线阅读 下载PDF
Colorless/Black Switching Electrochromic Device Based on WO_(3)·xH_(2)O and Reversible Metal Electrodeposition
9
作者 WAN Xinyi WANG Wenqi +3 位作者 LI Jiacheng ZHAO Junliang MA Dongyun WANG Jinmin 《无机材料学报》 北大核心 2025年第10期1163-1172,I0001,I0002,共12页
Electrochromic(EC)smart windows utilizing a reversible metal electrodeposition device(RMED)offer a compelling alternative for dynamically regulating transmissions of optical and thermal energy.An EC device(ECD)is cons... Electrochromic(EC)smart windows utilizing a reversible metal electrodeposition device(RMED)offer a compelling alternative for dynamically regulating transmissions of optical and thermal energy.An EC device(ECD)is constructed by reversible metal electrodeposition(RME)of Bi/Cu on WO_(3)·xH_(2)O film electrodeposited onto fluorine-doped tin oxide(FTO)transparent conductive glass.The electrolyte consists of CuCl_(2),BiCl_(3),KCl and HCl aqueous solution,supplying necessary components for both electrochemical and electrodeposition processes.The ECD shows ability to rapidly transition between colorless and black states,which achieves a large optical modulation of 77.0%at 570 nm.In the black state,the ECD exhibits a near-zero transmittance in the wavelength range of 400-1100 nm while maintaining 96.6%of its initial optical modulation after coloration/bleaching cycling of 60000 s,exhibiting good cyclic stability.This RMED has relatively high stability under open-circuit voltage and also possesses excellent heat insulation performance.The results offer a solution to overcome the poor cyclic stability of RMEDs and improve the optical modulation of ECDs. 展开更多
关键词 reversible metal electrodeposition electrochromic Wo_(3)·xH_(2)o
在线阅读 下载PDF
Co-Li_(2)O/γ-Al_(2)O_(3)对甘油水蒸汽重整制氢工艺的影响
10
作者 李婉婷 刘思乐 +2 位作者 回梁川 万鑫雅 黄滢睿 《工业催化》 2025年第4期45-50,共6页
采用分步浸渍法制备以Co为活性组分,Li_(2)O为助剂,γ-Al_(2)O_(3)为载体的Co-Li_(2)O/γ-Al_(2)O_(3)催化剂,用于甘油水蒸气制氢反应,考察反应温度、水醇比、甘油液空速对反应的影响,并利用正交实验确定最佳工艺条件。采用XRD、BET及TP... 采用分步浸渍法制备以Co为活性组分,Li_(2)O为助剂,γ-Al_(2)O_(3)为载体的Co-Li_(2)O/γ-Al_(2)O_(3)催化剂,用于甘油水蒸气制氢反应,考察反应温度、水醇比、甘油液空速对反应的影响,并利用正交实验确定最佳工艺条件。采用XRD、BET及TPR等手段对Co-Li_(2)O/γ-Al_(2)O_(3)催化剂的物相、比表面积、积炭情况进行表征。结果表明,Co-Li_(2)O/γ-Al_(2)O_(3)催化剂具有较大的平均孔半径及良好的抗积碳性能。最佳反应条件是:反应温度为600℃,水醇比为24,甘油液空速为0.24 h^(-1),此时氢产率为5.5662 mol·mol^(-1)。 展开更多
关键词 催化化学 甘油 Co-Li_(2)o-al_(2)o_(3) 氢产率 工艺条件
在线阅读 下载PDF
Z-scheme heterojunction Zn_(3)(OH)_(2)(V_(2)O_(7))(H_(2)O)_(2)/V-Zn(O,S)for enhanced visible-light photocatalytic N2 fixation via synergistic heterovalent vanadium states and oxygen vacancy defects
11
作者 Pengkun Zhang Qinhan Wu +7 位作者 Haoyu Wang Dong-Hau Kuo Yujie Lai Dongfang Lu Jiqing Li Jinguo Lin Zhanhui Yuan Xiaoyun Chen 《Chinese Journal of Catalysis》 2025年第7期279-293,共15页
Herein,we established a Zn_(3)(OH)_(2)(V_(2)O_(7))(H_(2)O)_(2)/V-Zn(O,S)Z-scheme heterojunction labeled ZnVO/V-Zn(O,S)with a heterovalent V^(4+)/V^(5+)states and oxygen vacancies in both phases via a one-step in-situ ... Herein,we established a Zn_(3)(OH)_(2)(V_(2)O_(7))(H_(2)O)_(2)/V-Zn(O,S)Z-scheme heterojunction labeled ZnVO/V-Zn(O,S)with a heterovalent V^(4+)/V^(5+)states and oxygen vacancies in both phases via a one-step in-situ hydrolysis method.The NaBH_(4) regulated the ZnVO/V-Zn(O,S)-3 with rich Vo and suitable n(V^(4+))/n(V^(5+))ratio achieved an excellent photocatalytic nitrogen fixation activity of 301.7μmol/(g×h)and apparent quantum efficiency of 1.148%at 420 nm without any sacrificial agent,which is 11 times than that of V-Zn(O,S).The Vo acts as the active site to trap and activate N_(2) molecules and to trap and activate H_(2)O to produce the H for N_(2) molecules photocatalytic reduction.The rich Vo defects can also reduce the competitive adsorption of H_(2)O and N_(2) molecules on the surface active site of the catalyst.The heterovalent vanadium states act as the photogenerated electrons,quickly hopping between V^(4+)and V^(5+)to transfer for the photocatalytic N_(2) reduction reaction.Additionally,the Z-scheme heterojunction effectively minimizes photogenerated carrier recombination.These synergistic effects collectively boost the photocatalytic nitrogen fixation activity.This study provides a practical method for designing Z-scheme heterojunctions for efficient photocatalytic N_(2) fixation under mild conditions. 展开更多
关键词 Zn_(3)(oH)_(2)(V_(2)o_(7))(H_(2)o)_(2) Z-scheme heterojunction Heterovalent valence states oxygen vacancy Photocatalytic N_(2)fixation
在线阅读 下载PDF
Rational construction of S-scheme CdS quantum dots/In_(2)O_(3) hollow nanotubes heterojunction for enhanced photocatalytic H_(2)evolution
12
作者 Yong-Hui Wu Yu-Qing Yan +3 位作者 Yi-Xiang Deng Wei-Ya Huang Kai Yang Kang-Qiang Lu 《Chinese Journal of Catalysis》 2025年第3期333-340,共8页
The rapid recombination of photogenerated carriers poses a significant limitation on the use of CdS quantum dots(QDs)in photocatalysis.Herein,the construction of a novel S-scheme heterojunction between cubic-phase CdS... The rapid recombination of photogenerated carriers poses a significant limitation on the use of CdS quantum dots(QDs)in photocatalysis.Herein,the construction of a novel S-scheme heterojunction between cubic-phase CdS QDs and hollow nanotube In_(2)O_(3)is successfully achieved using an electrostatic self-assembly method.Under visible light irradiation,all CdS-In_(2)O_(3)composites exhibit higher hydrogen evolution efficiency compared to pure CdS QDs.Notably,the photocatalytic H_(2)evolution rate of the optimal CdS-7%In_(2)O_(3)composite is determined to be 2258.59μmol g^(−1)h^(−1),approximately 12.3 times higher than that of pure CdS.The cyclic test indicates that the CdS-In_(2)O_(3)composite maintains considerable activity even after 5 cycles,indicating its excellent stability.In situ X-ray photoelectron spectroscopy and density functional theory calculations confirm that carrier migration in CdS-In_(2)O_(3)composites adheres to a typical S-scheme heterojunction mechanism.Additionally,a series of characterizations demonstrate that the formation of S-scheme heterojunctions between In_(2)O_(3)and CdS inhibits charge recombination and accelerates the separation and migration of photogenerated carriers in the CdS QDs,thus achieving enhanced photocatalytic performance.This work elucidates the pivotal role of S-scheme heterojunctions in photocatalytic H_(2)production and offers novel insights into the construction of effective composite photocatalysts. 展开更多
关键词 CdS In2o3 Quantum dot Photocatalytic H_(2)evolution S-scheme heterojunction
在线阅读 下载PDF
不同分子量P3HT/TiO_(2)复合材料可见光催化性能研究
13
作者 张见玲 《广州化工》 2025年第10期111-114,共4页
为进一步优化共轭聚合物/二氧化钛(TiO_(2))复合光催化材料的结构,提升其可见光催化降解性能,本研究制备了不同分子量P3HT/TiO_(2)复合光催化材料,并研究了其可见光催化降解甲基橙的性能。结果表明:低分子量P3HT/TiO_(2)复合光催化材料... 为进一步优化共轭聚合物/二氧化钛(TiO_(2))复合光催化材料的结构,提升其可见光催化降解性能,本研究制备了不同分子量P3HT/TiO_(2)复合光催化材料,并研究了其可见光催化降解甲基橙的性能。结果表明:低分子量P3HT/TiO_(2)复合光催化材料表现出更显著的可见光催化降解性能提升,综合分析复合材料的可见光吸收能力、光电流和对甲基橙的吸附性能,这是由于低分子量P3HT对MO较高的吸附性能促进了光催化降解过程中的界面反应。 展开更多
关键词 复合光催化材料 分子量 P3HT tio2
在线阅读 下载PDF
0.3K_(2)O-0.7CaO-Al_(2)O_(3)-SiO_(2)系釉的始熔温度和性能研究
14
作者 刘干平 李刘旒 刘小文 《中国陶瓷工业》 2025年第3期21-30,共10页
以70%钾长石与30%石灰石比例配制成的釉为基础,分别添加15%高岭土和10%石英,按网格法配制成36种0.3K_(2)O-0.7CaO-Al_(2)O_(3)-SiO_(2)系列的釉,施于白胎上。改变开始还原温度在不同气氛下烧制,观察各烧成样品的釉色变化与显微结构,推... 以70%钾长石与30%石灰石比例配制成的釉为基础,分别添加15%高岭土和10%石英,按网格法配制成36种0.3K_(2)O-0.7CaO-Al_(2)O_(3)-SiO_(2)系列的釉,施于白胎上。改变开始还原温度在不同气氛下烧制,观察各烧成样品的釉色变化与显微结构,推算出釉的始熔温度,并对该系列釉的始熔温度、高温黏度、分相和析晶、热膨胀系数以及釉的呈色等变化规律进行分析和讨论。 展开更多
关键词 0.3K_(2)o-0.7Cao-al_(2)o_(3)-Sio_(2)系釉 还原温度 始熔温度 显微结构
在线阅读 下载PDF
Enhanced photoelectrochemical performance of TiO_(2)/Sb_(2)S_(3) nanorod arrays by annealing in Ar ambience
15
作者 SUI Meirong GU Xiuquan 《Optoelectronics Letters》 2025年第7期385-390,共6页
In this work,the TiO_(2)/Sb_(2)S_(3) nanorod arrays(NRAs)were synthesized through a two-stage hydrothermal route for photoelectrochemical(PEC)water splitting.The effect of annealing treatment in Ar ambience on the PEC... In this work,the TiO_(2)/Sb_(2)S_(3) nanorod arrays(NRAs)were synthesized through a two-stage hydrothermal route for photoelectrochemical(PEC)water splitting.The effect of annealing treatment in Ar ambience on the PEC activity of TiO_(2)/Sb_(2)S_(3) composite sample was investigated by electrochemical impedance analysis,including Nyquist and Mott-Schottky(M-S)plots.It was demonstrated that vacuum annealing could crystallize Sb_(2)S_(3) component and change its color from red to black,leading to an increment of photocurrent density from 1.9 A/m^(2) to 4.25 A/m^(2) at 0 V versus saturated calomel electrode(VSCE).The enhanced PEC performance was mainly attributed to the improved visible light absorption.Moreover,annealing treatment facilitated retarding the electron-hole recombination occurred at the solid/liquid interfaces.Our work might provide a novel strategy for enhancing the PEC performance of a semiconductor electrode. 展开更多
关键词 electrochemical impedance analysisincluding visible light absorption tio_(2)/Sb_(2)S_(3)nanorod arrays nanorod arrays nras vacuum annealing annealing treatment increment o photoelectrochemical performance
原文传递
Utilization of steelwork off-gases through methanol synthesis:Sulfur-induced dynamic migration of ZnO_(x) over industrial Cu/ZnO/Al_(2)O_(3) catalyst and the poisoning mechanism
16
作者 Yukun Tian Yu Zeng +5 位作者 Ziyang Chen Hua Tong Ming Chen Zhiyong Zhong Daiqi Ye Limin Chen 《Journal of Environmental Sciences》 2025年第12期659-673,共15页
The reduction of carbon emissions in the steel industry is a significant challenge,and utilizing CO_(2) from carbon intensive steel industry off-gases for methanol production is a promising strategy for decarbonizatio... The reduction of carbon emissions in the steel industry is a significant challenge,and utilizing CO_(2) from carbon intensive steel industry off-gases for methanol production is a promising strategy for decarbonization.However,steelwork off-gases typically contain various impurities,including H_(2)S,which can deactivate commercial methanol synthesis catalysts,Cu/ZnO/Al_(2)O_(3)(CZA).Reverse water-gas shift(RWGS)reaction is the predominant side reaction in CO_(2) hydrogenation to methanol which can occur at ambient pressure,enabling the decouple of RWGS from methanol production at high pressure.Then,a series of activated CZA catalysts has been in-situ pretreated in 400 ppm H_(2)S/Ar at 250℃and tested for both RWGS reaction at ambient pressure and CO_(2) hydrogenation to methanol at high pressure.An innovative decoupling strategy was employed to isolate the RWGS reaction from the methanol synthesis process,enabling the investigation of the evolution of active site structures and the poisoning mechanism through elemental analysis,X-ray Diffraction,X-ray Photoelectron Spectroscopy,Fourier Transform Infrared Spectroscopy,Temperature Programmed Reduction and CO_(2) Temperature Programmed Desorption.The results indicate that there are different dynamic migration behaviors of ZnO_(x) in the two reaction systems,leading to different poisoning mechanisms.These interesting findings are beneficial to develop sulfur resistant and durable highly efficient catalysts for CO_(2) hydrogenation to methanol,promoting the carbon emission reduction in steel industry. 展开更多
关键词 Steelwork off-gases Co_(2)hydrogenation to methanol H_(2)S Cu/Zn o/Al_(2)o_(3)catalysts Zno_(x)migration Deactivation and promotion mechanisms
原文传递
Towards rational design of Cu-SSZ-13 catalysts with less N_(2)O formation in NH_(3)-SCR reaction:The effect of BrФsted acid sites
17
作者 Jianqi Liu Jinpeng Du +9 位作者 Jingyi Wang Shichao Han Yulong Shan Yan Zhang Xuanhao Wu Shan Gao Yunbo Yu Zhongbiao Wu Wenpo Shan Hong He 《Journal of Environmental Sciences》 2025年第11期546-557,共12页
Ammonia Selective Catalytic Reduction(NHs-SCR)technology has been employed to eliminate NO_(x) from diesel engine exhaust,with Cu-SSZ-13 serving as the commercial catalyst.The greenhouse gas N_(2)O is produced as a by... Ammonia Selective Catalytic Reduction(NHs-SCR)technology has been employed to eliminate NO_(x) from diesel engine exhaust,with Cu-SSZ-13 serving as the commercial catalyst.The greenhouse gas N_(2)O is produced as a byproduct when using Cu-SSZ-13 as the NH_(3)-SCR catalyst.To achieve synergistic control of pollutants and greenhouse gases in diesel engine exhaust,rational design of Cu-SSZ-13 catalysts is required.In this study,the effect of Brønsted acid sites in Cu-SSZ-13 catalysts on the formation of N_(2)O was investigated.Mild thermal treatmentwas innovatively employed to prepare Cu-SSZ-13 catalysts with different amounts of Brønsted acid sites.EPR,H_(2)-TPR,NH_(3)-TPD,NMR were utilized to determine that the Brønsted acid sites were modified while the Cu species remained unchanged.Thereby an accurate assessment of the influence of Brønsted acid sites on N_(2)O formation could be achieved.Our results showed that Cu-SSZ-13 with more Brønsted acid sites produced less N_(2)O during the NH_(3)-SCR reaction.In the low-temperature region,the presence of framework acid sites facilitates the decomposition of the NH_(4)NO_(3)assisted by NO to form N_(2)and H_(2)O,reducing the formation of N_(2)O.In the high-temperature region,the Brønsted acid sites promote the decomposition of NH_(2)NO into N_(2)and H_(2)O.Meanwhile,the N_(2)O-SCR reaction can also be promoted by Brønsted acid sites,thereby decreasing N_(2)O emissions.This study suggests that in the future design and synthesis of Cu-SSZ-13 zeolites,attention should be paid to creating more Brønsted acid sites in Cu-SSZ-13 to reduce N_(2)O emissions. 展开更多
关键词 NH_(3)-SCR No_(x)abatement N_(2)o emission control Cu-SSZ-13 zeolite Brønsted acid sites
原文传递
水氮耦合对河西灌区滴灌西瓜NH_(3)和N_(2)O排放的影响
18
作者 薛亮 马忠明 +3 位作者 赵安宇 罗双龙 薛莲 Muhammad Ali RAZA 《干旱区地理》 北大核心 2025年第5期801-811,共11页
NH_(3)和N_(2)O排放是氮素气态损失的主要途径,研究膜下滴灌条件下不同水氮供应量对氮素气态损失的影响对于河西灌区西瓜生产中水氮管理方案的制定具有重要意义。试验采用裂区设计,主处理按田间持水量的80%(I80)、65%(I65)和50%(I50)设... NH_(3)和N_(2)O排放是氮素气态损失的主要途径,研究膜下滴灌条件下不同水氮供应量对氮素气态损失的影响对于河西灌区西瓜生产中水氮管理方案的制定具有重要意义。试验采用裂区设计,主处理按田间持水量的80%(I80)、65%(I65)和50%(I50)设3个灌水下限,灌水上限设为田间持水量的95%,副处理设0(N0)、100 kg·hm^(-2)(N100)、200 kg·hm^(-2)(N200)和300 kg·hm^(-2)(N300)4个施氮水平。试验采用通气法和静态箱-气相色谱法,分析了不同处理下土壤NH_(3)和N_(2)O排放动态变化以及西瓜产量和品质。结果表明:(1)土壤氮素气态排放受水氮共同影响,NH_(3)、N_(2)O排放在施用基肥后1~2 d达到高峰,持续5~7 d,累积排放量在苗期最大,分别占全生育期的33.33%和47.22%;全生育期NH_(3)、N_(2)O累积排放量分别为3.05~15.39 kg·hm^(-2)和0.51~2.00 kg·hm^(-2)。(2)提高水氮供应量均会促使NH_(3)、N_(2)O排放,氮素的作用大于灌水,I80条件下增施氮肥,NH_(3)、N_(2)O累积排放量分别增加了63.86%~285.48%和120.41%~308.82%。(3)处理I65N200的氮素利用率达到32.62%,显著高于处理I80N300,产量和可溶性固形物含量分别为70159 kg·hm^(-2)和11.39%,与处理I80N300差异不显著。综合考虑产量、品质和氮素利用率,在河西灌区西瓜膜下滴灌种植中,将土壤含水量控制在田间最大持水量的65%~95%之间,施氮量优化至200 kg·hm^(-2)时,能够保持较高的产量和品质,并有利于控制NH_(3)和N_(2)O排放。 展开更多
关键词 西瓜 滴灌 水氮耦合 NH_(3)排放 N_(2)o排放
在线阅读 下载PDF
MoO_(3)-Cu_(2)O/CN三相复合光催化剂的制备及其降解四环素性能 被引量:2
19
作者 崔春丽 郝振华 +2 位作者 舒永春 徐继香 王磊 《复合材料学报》 北大核心 2025年第3期1361-1374,共14页
本文通过水热法先在g-C_(3)N_(4)(CN)上原位生长MoO_(3),继而在其表面电沉积Cu_(2)O构建了MoO_(3)-Cu_(2)O/CN三相复合光催化剂。采用XRD、SEM、TEM、XPS和FTIR等手段对催化剂进行表征,证明了复合光催化剂的成功制备。以四环素为目标污... 本文通过水热法先在g-C_(3)N_(4)(CN)上原位生长MoO_(3),继而在其表面电沉积Cu_(2)O构建了MoO_(3)-Cu_(2)O/CN三相复合光催化剂。采用XRD、SEM、TEM、XPS和FTIR等手段对催化剂进行表征,证明了复合光催化剂的成功制备。以四环素为目标污染物,探究了所制备光催化剂对四环素的降解效果及光催化剂的作用机制。结果表明,在可见光下,1.5 MoO_(3)-Cu_(2)O-100/CN复合材料对四环素的降解效果最佳,150 min时降解率为97.75%,分别是CN(45.28%)和1.5 MoO_(3)/CN(63.24%)的2.2和1.5倍。采用自由基捕获实验及电子顺磁共振光谱(EPR)对机制进行了探究,证实了羟基自由基(·OH)和超氧自由基(·O_(2)^(-))是光催化过程的主要活性物质。综合各项测试计算CN、MoO_(3)和Cu_(2)O的价带和导带位置,表明三相复合光催化剂形成了双Z型异质结。同时光催化活性的提高主要归因于双Z机制的构建,拓宽了可见光吸收范围,保留了氧化还原能力较高的空穴电子,降低了光生电子与空穴的复合率。稳定性实验结果表明制备的催化剂在经过4次循环后,对四环素的降解率仍达到90%以上,具有优异的稳定性,可循环使用。 展开更多
关键词 Moo_(3)-Cu_(2)o/CN 双Z机制 四环素 降解 光催化
原文传递
纳米Al_(2)O_(3)增强铝基复合材料制备技术及力学性能研究进展 被引量:1
20
作者 荣智峥 魏午 +4 位作者 赵宇 毕舰镭 高阳 黄晖 聂祚仁 《材料工程》 北大核心 2025年第5期130-144,共15页
纳米Al_(2)O_(3)/Al复合材料作为轻质高性能结构材料,可实现轻量化节能减排,在航空航天、汽车工业、船舶制造、国防及5G电子通讯等领域具有广阔的应用前景。本文主要介绍高能球磨粉末冶金法、超声辅助铸造法、搅拌摩擦法、增材制造法、... 纳米Al_(2)O_(3)/Al复合材料作为轻质高性能结构材料,可实现轻量化节能减排,在航空航天、汽车工业、船舶制造、国防及5G电子通讯等领域具有广阔的应用前景。本文主要介绍高能球磨粉末冶金法、超声辅助铸造法、搅拌摩擦法、增材制造法、原位反应法等国内外纳米Al_(2)O_(3)/Al复合材料制备技术。总结分析纳米Al_(2)O_(3)增强体、增强体与铝基体的界面微结构、增强体的尺寸和含量、铝基体的晶粒尺寸、增强体的分散性和微观构型设计对纳米Al_(2)O_(3)/Al复合材料力学性能的影响。概述了纳米Al_(2)O_(3)/Al复合材料中主要的强化机制。最后,展望了纳米Al_(2)O_(3)/Al复合材料未来在高增强体体积分数的大尺寸制备技术、非均质构型优化以及高强耐热结构功能一体化等方面的发展方向。 展开更多
关键词 纳米AL2o3 铝基复合材料 制备方法 力学性能 强化机制
在线阅读 下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部