Nanocomposites composed of SnO2 and CuO were prepared by hydrothermal method. The microstructures of obtained SnO2-CuO powders were characterized by X-ray diffraction, scanning electron microscopy, transmission electr...Nanocomposites composed of SnO2 and CuO were prepared by hydrothermal method. The microstructures of obtained SnO2-CuO powders were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and nitrogen adsorption-desorption test. The results show that the nanocomposites exhibited coral-like nanostructure, and the average crystalline size of SnO2 was 12 nm. The specific surface area of the four samples, SnO2- 0.2CuO, SnO2-0.5CuO, SnO2-1.0CuO and SnO2-2.0CuO are 72.97, 58.77, 49.72 and 54.95 m2/g, respectively. The gas sensing performance of the four samples to ethanol, formaldehyde and H2S was studied. The sensor of SnOa-0.5CuO exhibited high response to hydrogen sulfide （4173 to 10 ppm H2S, where ppm represent 10-6）, and low response to ethanol and formaldehyde. The good selectivity exhibited that the SnO2-0.5CuO nanocomposite can be a promising candidate for highly sensitive and selective gas-sensing material to H2S.展开更多
Transparent ZrO2-polyurethane nanocomposites with high refractive index were prepared by dispersing ZrO2 nanoparticles in a polyurethane matrix via ligand molecule engineering. TEM showed that the inorganic particles ...Transparent ZrO2-polyurethane nanocomposites with high refractive index were prepared by dispersing ZrO2 nanoparticles in a polyurethane matrix via ligand molecule engineering. TEM showed that the inorganic particles were well dispersed within the polymeric network with no significant macroscopic agglomeration. By controlling the phase separation it was possible to obtain transparent zirconia nanostructured coatings, characterized by improved mechanical and thermal properties. UV-Vis spectra indicated that the coatings still maintained transparency in the visible light. The refractive index of the UV-cured films depends linearly on the ZrO2 content and varies from 1.475 to 1.625 （20 wt%） at 633 nm. These coatings could find advanced applications in coatings of optical and electronic devices.展开更多
The preparation of TiO2/poly（L-lactide-co-ε-caprolactone）（PLCL） nanocomposites and their properties were reported.TiO2nanoparticles were surface modified by ring-opening polymerization of ε-caprolactone（ε-CL）...The preparation of TiO2/poly（L-lactide-co-ε-caprolactone）（PLCL） nanocomposites and their properties were reported.TiO2nanoparticles were surface modified by ring-opening polymerization of ε-caprolactone（ε-CL）.The resulting poly（ε-caprolactone）-grafted TiO2（g-TiO2） was characterized by Fourier transform infrared spectroscopy（FTIR）,thermogravimetric analysis（TGA） and transmission electron microscopy（TEM）.The g-TiO2can be uniformly dispersed in chloroform and the g-TiO2/PLCL nanocomposites were successfully fabricated through solvent-casting method.The effects of the content of g-TiO2nanoparticles on tensile properties and shape memory properties were investigated.A significant improvement in the tensile properties of the 5% g-TiO2/PLCL mass fraction nanocomposite is obtained：an increase of 113% in the tensile strength and an increase of 11% in the elongation at break over pure PLCL polymer.The g-TiO2/PLCL nanocomposites with a certain amount of g-TiO2content have better shape memory properties than pure PLCL polymer.The g-TiO2nanoparticles play an additional physical crosslinks which are contributed to improvement of the shape memory properties.展开更多
An innovative photocatalyst, Carbon nanotube （CNT） supported Ce-TiO2 nanocomposite was successfully synthesized via modi-fied sol gel method and investigated in a batch reactor for abolition of phenol under UV light...An innovative photocatalyst, Carbon nanotube （CNT） supported Ce-TiO2 nanocomposite was successfully synthesized via modi-fied sol gel method and investigated in a batch reactor for abolition of phenol under UV light spectrum. Characterization of catalyst micro-structure and internal properties were done by means of X-ray diffraction （XRD）, Brunauer-Emmett-Teller （BET）, scanning electron micros-copy （SEM）, transmission electron microscopy （TEM） and UV-vis diffuse reflectance spectra （DRS）. Ce doping can inhibit phase transfor-mation from anatase to rutile and eliminate the recombination of electron-hole pairs in the catalyst. The presence of CNT in TiO2 composite can both increase the photoactivity under UV and change surface properties to achieve sensitivity to visible light. The optimum mass ratio of CNT support and cerium （Ce） dopant in TiO2 was the prominent factor to harvest CNT/Ce-TiO2 photocatalyst nanocomposite. The results demonstrated that optimum mass ratio of CNT：TiO2：Ce was 0.02：1.0：0.06, which resulted in the great performance of the photocatalyst to de-grade about 94% of phenol in a 50 mg/L solution in only 3 h. In this paper, dissimilar role of CNT support and Ce dopant in the TiO2 photo-catalysis of phenol was also discussed.展开更多
Surface of TiO2 nanoparticles was modified with the in situ chemical oxidative polymerization of aniline. Polyaniline modified TiO2 nanoparticles （PANI-TiO2） were characterized with the FT-IR, XRD, SEM and TEM techn...Surface of TiO2 nanoparticles was modified with the in situ chemical oxidative polymerization of aniline. Polyaniline modified TiO2 nanoparticles （PANI-TiO2） were characterized with the FT-IR, XRD, SEM and TEM techniques. Results confirmed that PANI was grafted successfully on the surface of TiO2 nanoparticles, therefore agglomeration of nanoparticles decreased dramatically. Polyvinyl chloride nanocomposites filled with 1 wt%-5 wt% of PANI-TiO2 and TiO2 nanoparticles were prepared via the solution blending method. PVC nanocomposites were analyzed with FT-IR, XRD, SEM, TG/DTA, DSC and tensile test techniques. Effect of PANI as surface modifier of nanoparticles was discussed according to the final properties of PVC nanocomposites. Results demonstrated that deposition of PANI on the surface of TiO2 nanoparticles improved the interfacial adhesion between the constituents of nanocomposites, which resulted in better dispersion of nanoparticles in the PVC matrix. Also PVC/PANI-TiO2 nanocomposites showed higher thennal resistance, tensile strength and Young＇s modulus compared to those of unfilled PVC and PVC/TiO2 nanocomposites.展开更多
Given the nonuse of TiO2 nanoparticles as the reinforcement of AA2024 alloy in fabricating composites by ex-situ casting methods,it was decided to process the AA2024−xTiO2(np)(x=0,0.5 and 1 vol.%)nanocomposites by emp...Given the nonuse of TiO2 nanoparticles as the reinforcement of AA2024 alloy in fabricating composites by ex-situ casting methods,it was decided to process the AA2024−xTiO2(np)(x=0,0.5 and 1 vol.%)nanocomposites by employing the stir casting method.The structural properties of the produced samples were then investigated by optical microscopy and scanning electron microscopy;their mechanical properties were also addressed by hardness and tensile tests.The results showed that adding 1 vol.%TiO2 nanoparticles reduced the grain size and dendrite arm spacing by about 66%and 31%,respectively.Also,hardness,ultimate tensile strength,yield strength,and elongation of AA2024−1vol.%TiO2(np)composite were increased by about 25%,28%,4%and 163%,respectively,as compared to those of the monolithic component.The agglomerations of nanoparticles in the structure of nanocomposites were found to be a factor weakening the strength against the strengthening mechanisms.Some agglomerations of nanoparticles in the matrix were detected on the fractured surfaces of the tension test specimens.展开更多
An efficient visible-light-responsive BiOBr/TiO2 heterojunction nanocomposite was fabricated successfully using in-situ depositing technique at room temperature by introducing BiOBr onto the surface of TiO2 nano- belt...An efficient visible-light-responsive BiOBr/TiO2 heterojunction nanocomposite was fabricated successfully using in-situ depositing technique at room temperature by introducing BiOBr onto the surface of TiO2 nano- belts pre-prepared by hydrothermal reaction and etched with H2SO4. The obtained particles were characterized by XRD, SEM, TEM, XPS, UV-Vis DRS and PL techniques. BiOBr/TiO2 heterojunction nanocomposites with different mass ratios of m （BiOBr）/m （TiO2） were discussed in order to get the best photocatalytie activity, and BiOBr/TiO2-1.0 was proved to be the optimal mass ratio. BiOBr/TiO2-1.0 exhibited excellent photocatalytic activity in the degradation of RhB compared with TiO2 nanobelts, pure BiOBr and the mechanical mixture of TiO2 nanobelts and BiOBr. At last, a possible mechanism ofphotocatalytic enhancement was proposed.展开更多
Titanium dioxide/ kaolinite nanocomposite was prepared by the sol-gel method, with layered kaolinite as a substrate and Ti （ OC4H9 ）4 as a precursor. The effects of hydrolysis, drying and calcination on the producti...Titanium dioxide/ kaolinite nanocomposite was prepared by the sol-gel method, with layered kaolinite as a substrate and Ti （ OC4H9 ）4 as a precursor. The effects of hydrolysis, drying and calcination on the production of nanometric titanium dioxide were discussed. The optimal conditions for preparation were＂ bbtained through experiments. The 1- 10 nrn thick monolayer anatase nano TiO2 crystal was produced under the conditions as follows： hydrolyzed at 37-42 ℃ for 4 h, dried at 70-80 ℃ for 1 h, and calcined at 550-650℃ for 3 h. The rate of degradation of 40 mg/ L azo dye and 20 mg/ L acid red dye can reuch 96% and 81.45%, respectively.展开更多
One of the most general methods to enhance the separation of photogenerated carriers for g‐C3N4is to construct a suitable heterojunctional composite,according to the principle of matching energy levels.The interface ...One of the most general methods to enhance the separation of photogenerated carriers for g‐C3N4is to construct a suitable heterojunctional composite,according to the principle of matching energy levels.The interface contact in the fabricated nanocomposite greatly influences the charge transfer and separation so as to determine the final photocatalytic activities.However,the role of interface contact is often neglected,and is rarely reported to date.Hence,it is possible to further enhance the photocatalytic activity of g‐C3N4‐based nanocomposite by improving the interfacial connection.Herein,phosphate-oxygen(P-O)bridged TiO2/g‐C3N4nanocomposites were successfully synthesized using a simple wet chemical method,and the effects of the P-O functional bridges on the photogenerated charge separation and photocatalytic activity for pollutant degradation and CO2reduction were investigated.The photocatalytic activity of g‐C3N4was greatly improved upon coupling with an appropriate amount of nanocrystalline TiO2,especially with P-O bridged TiO2.Atmosphere‐controlled steady‐state surface photovoltage spectroscopy and photoluminescence spectroscopy analyses revealed clearly the enhancement of photogenerated charge separation of g‐C3N4upon coupling with the P-O bridged TiO2,resulting from the built P-O bridges between TiO2and g‐C3N4so as to promote effective transfer of excited electrons from g‐C3N4to TiO2.This enhancement was responsible for the improved photoactivity of the P-O bridged TiO2/g‐C3N4nanocomposite,which exhibited three‐time photocatalytic activity enhancement for2,4‐dichlorophenol degradation and CO2reduction compared with bare g‐C3N4.Furthermore,radical‐trapping experiments revealed that the·OH species formed as hole‐modulated direct intermediates dominated the photocatalytic degradation of2,4‐dichlorophenol.This work provides a feasible strategy for the design and synthesis of high‐performance g‐C3N4‐based nanocomposite photocatalysts for pollutant degradation and CO2reduction.展开更多
A resistive humidity sensor was prepared based on sodium polystyrenesulfonate (NaPSS)/TiO2 nanocomposites, and its electrical response to humidity was examined. The sensor exhibits better linearity, smaller hysteresis...A resistive humidity sensor was prepared based on sodium polystyrenesulfonate (NaPSS)/TiO2 nanocomposites, and its electrical response to humidity was examined. The sensor exhibits better linearity, smaller hysteresis (< 4% RH) and quicker response (absorption: less than 2 s; desorption: less than 20 s) in comparison with sensor composed of NaPSS. The effect of concentration of NaPSS and TiO2 on humidity response of sensors was discussed.展开更多
This work is focused on the combination of two building-blocks, nanocrystalline TiO2 particles and polyaniline conductive films （PAni）. The preparation of new nanostructured composite materials, displaying electron-...This work is focused on the combination of two building-blocks, nanocrystalline TiO2 particles and polyaniline conductive films （PAni）. The preparation of new nanostructured composite materials, displaying electron- and proton-conductive properties, to be used for the fabrication of new and superior energy storage devices was envisaged. The semiconducting TiO2 nanoparticles were obtained by means of a hydrothermal route. The PAni films were prepared on glassy carbon electrodes by electrochemical polymerization, under potential dynamic conditions. After characterization by X-ray diffraction, transmission electron microscopy or scanning electron microscopy and electrochemical techniques, the nanocrystalline particles were immobilized in the polymer matrix. The incorporation of the TiO2 was achieved using two distinct approaches： during the polymer growth or by deposition over previously prepared PAni films. The results demonstrate that the PAni morphology depends on the experimental conditions used during the polymer growth. After TiO2 immobilization, the best electrochemical response was obtained for the nanocomposite structure produced through the TiO2 incorporation after the PAni film synthesis. The modified electrodes were structurally and morphologically characterized and their electro-catalytic activity towards the hydrogen evolution reaction was analyzed. A new electrochemical performance related with the oxidation of molecular hydrogen entrapped in the PAni-TiO2 matrix was observed for the modified electrode after TiO2 incorporation. This behavior can be directly associated with the synergetic combination of the TiO2 and PAni, and is dependent on the amount of the semiconductor.展开更多
A new nanocomposite material for construction of glucose biosensor was prepared. The biosensor was formed by entrapping glucose oxidase(Gox) into chitosan/nanoporous ZrO2/multiwalled carbon nanotubes nanocomposite fil...A new nanocomposite material for construction of glucose biosensor was prepared. The biosensor was formed by entrapping glucose oxidase(Gox) into chitosan/nanoporous ZrO2/multiwalled carbon nanotubes nanocomposite film. In this biosensing thin film, the multiwalled carbon nanotubes can effectively catalyze hydrogen peroxide and nanoporous ZrO2 can enhance the stability of the immobilized enzyme. The resulting biosensor provides a very effective matrix for the immobilization of glucose oxidase and exhibits a wide linear response range from 8 μmol/L to 3 mmol/L with a correlation coefficient of 0.994 for the detection of glucose. And the response time and detection limit of the biosensor are determined to be 6 s and 3.5 μmol/L, respectively. Another attractive characteristic is that the biosensor is inexpensive, stable and reliable.展开更多
以 Sn Cl4· Ti( OBu) 4、氨水、乙醇为原料 ,采用活性层包覆法 ,制备出 Ti O2 / Sn O2 复合光催化剂 ,并用IR、XRD、TEM和 BET等手段对样品进行了表征 .研究其对有机磷农药敌敌畏的光催化降解效果 ,与单一半导体催化剂 Sn O2 、Ti ...以 Sn Cl4· Ti( OBu) 4、氨水、乙醇为原料 ,采用活性层包覆法 ,制备出 Ti O2 / Sn O2 复合光催化剂 ,并用IR、XRD、TEM和 BET等手段对样品进行了表征 .研究其对有机磷农药敌敌畏的光催化降解效果 ,与单一半导体催化剂 Sn O2 、Ti O2 做了简单对比 .结果表明 :所制 Ti O2 / Sn O2 样品为包覆型结构 ,由锐钛矿型 Ti O2 金红石型 Sn O2 组成 ,与 Sn O2 及 Ti O2 晶体粉末相比所制 Ti O2 / Sn O2 包覆粒子光催化活性得到明显提高 .展开更多
Co−TiO2 nanocomposite films were prepared via magnetron sputtering at various substrate temperatures.The films comprise Co particles dispersed in an amorphous TiO2 matrix and exhibit coexisting ferromagnetic and super...Co−TiO2 nanocomposite films were prepared via magnetron sputtering at various substrate temperatures.The films comprise Co particles dispersed in an amorphous TiO2 matrix and exhibit coexisting ferromagnetic and superparamagnetic properties.When the substrate temperature increases from room temperature to 400℃,Co particles gradually grow,and the degree of Co oxidation significantly decreases.Consequently,the saturation magnetization increases from 0.13 to 0.43 T at the same Co content by increasing the substrate temperature from room temperature to 400℃.At a high substrate temperature,conductive pathways form among some of the clustered Co particles.Thus,resistivity rapidly declines from 1600 to 76μΩ·m.The magnetoresistive characteristic of Co−TiO2 films is achieved even at resistivity of as low as 76μΩ·m.These results reveal that the obtained nanocomposite films have low Co oxidation,high magnetization and magnetoresistance at room temperature.展开更多
ZrO2/Ni nanocomposite was produced by pulse electrodeposition and its superplastic properties were investigated by the tensile and bulging tests. The as-deposited nickel matrix has a narrow grain size distribution wit...ZrO2/Ni nanocomposite was produced by pulse electrodeposition and its superplastic properties were investigated by the tensile and bulging tests. The as-deposited nickel matrix has a narrow grain size distribution with a mean grain size of 45 nm. A maximum elongation of 605% was observed at 723 K and a strain rate of 1.67×10-3s-1 by tensile test. Superplastic bulging tests were subsequently performed using dies with diameters of 1 mm and 5 mm respectively based on the optimal superplastic forming temperature. The effects of forming temperature and gas pressure on bulging process were experimentally investigated. The results indicated that ZrO2/Ni nanocomposite samples can be readily bulged at 723 K with H/d value （defined as dome apex height over the die diameter） larger than 0.5, indicating that the nanocomposite has good bulging ability. SEM and TEM were used to examine the microstructure of the as-deposited and bulged samples. The observations showed that significant grain coarsening occurs during superplastic bulging, and the microstructure is found to depend on the forming temperature.展开更多
基金financially supported by the National Natural Science Foundation of China (No. 51072141)the scientific research projects of Education Department of Hubei province (D20141503)the President Foundation of Wuhan Institute of Technology (No. 2014029)
文摘Nanocomposites composed of SnO2 and CuO were prepared by hydrothermal method. The microstructures of obtained SnO2-CuO powders were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and nitrogen adsorption-desorption test. The results show that the nanocomposites exhibited coral-like nanostructure, and the average crystalline size of SnO2 was 12 nm. The specific surface area of the four samples, SnO2- 0.2CuO, SnO2-0.5CuO, SnO2-1.0CuO and SnO2-2.0CuO are 72.97, 58.77, 49.72 and 54.95 m2/g, respectively. The gas sensing performance of the four samples to ethanol, formaldehyde and H2S was studied. The sensor of SnOa-0.5CuO exhibited high response to hydrogen sulfide （4173 to 10 ppm H2S, where ppm represent 10-6）, and low response to ethanol and formaldehyde. The good selectivity exhibited that the SnO2-0.5CuO nanocomposite can be a promising candidate for highly sensitive and selective gas-sensing material to H2S.
基金supported by the Shanghai Leading Academic Discipline Project(No.B 113)
文摘Transparent ZrO2-polyurethane nanocomposites with high refractive index were prepared by dispersing ZrO2 nanoparticles in a polyurethane matrix via ligand molecule engineering. TEM showed that the inorganic particles were well dispersed within the polymeric network with no significant macroscopic agglomeration. By controlling the phase separation it was possible to obtain transparent zirconia nanostructured coatings, characterized by improved mechanical and thermal properties. UV-Vis spectra indicated that the coatings still maintained transparency in the visible light. The refractive index of the UV-cured films depends linearly on the ZrO2 content and varies from 1.475 to 1.625 （20 wt%） at 633 nm. These coatings could find advanced applications in coatings of optical and electronic devices.
基金Project(50903023) supported by the National Natural Science Foundation of ChinaProject(HEUCF201210005) supported by the Fundamental Research Funds for the Central Universities,ChinaProject(2010RFQXG037) supported by Harbin Special Fund for Innovation Talents of Science and Technology,China
文摘The preparation of TiO2/poly（L-lactide-co-ε-caprolactone）（PLCL） nanocomposites and their properties were reported.TiO2nanoparticles were surface modified by ring-opening polymerization of ε-caprolactone（ε-CL）.The resulting poly（ε-caprolactone）-grafted TiO2（g-TiO2） was characterized by Fourier transform infrared spectroscopy（FTIR）,thermogravimetric analysis（TGA） and transmission electron microscopy（TEM）.The g-TiO2can be uniformly dispersed in chloroform and the g-TiO2/PLCL nanocomposites were successfully fabricated through solvent-casting method.The effects of the content of g-TiO2nanoparticles on tensile properties and shape memory properties were investigated.A significant improvement in the tensile properties of the 5% g-TiO2/PLCL mass fraction nanocomposite is obtained：an increase of 113% in the tensile strength and an increase of 11% in the elongation at break over pure PLCL polymer.The g-TiO2/PLCL nanocomposites with a certain amount of g-TiO2content have better shape memory properties than pure PLCL polymer.The g-TiO2nanoparticles play an additional physical crosslinks which are contributed to improvement of the shape memory properties.
基金Project supported by Research University Grant Scheme (Project A/C No.814004)the Malaysian Technology Development Corporation (MTDC) under the Commercialization of Research and Development Fund (CRDF) (MBF065-USM/05)
文摘An innovative photocatalyst, Carbon nanotube （CNT） supported Ce-TiO2 nanocomposite was successfully synthesized via modi-fied sol gel method and investigated in a batch reactor for abolition of phenol under UV light spectrum. Characterization of catalyst micro-structure and internal properties were done by means of X-ray diffraction （XRD）, Brunauer-Emmett-Teller （BET）, scanning electron micros-copy （SEM）, transmission electron microscopy （TEM） and UV-vis diffuse reflectance spectra （DRS）. Ce doping can inhibit phase transfor-mation from anatase to rutile and eliminate the recombination of electron-hole pairs in the catalyst. The presence of CNT in TiO2 composite can both increase the photoactivity under UV and change surface properties to achieve sensitivity to visible light. The optimum mass ratio of CNT support and cerium （Ce） dopant in TiO2 was the prominent factor to harvest CNT/Ce-TiO2 photocatalyst nanocomposite. The results demonstrated that optimum mass ratio of CNT：TiO2：Ce was 0.02：1.0：0.06, which resulted in the great performance of the photocatalyst to de-grade about 94% of phenol in a 50 mg/L solution in only 3 h. In this paper, dissimilar role of CNT support and Ce dopant in the TiO2 photo-catalysis of phenol was also discussed.
基金financially supported by the University of Tabriz
文摘Surface of TiO2 nanoparticles was modified with the in situ chemical oxidative polymerization of aniline. Polyaniline modified TiO2 nanoparticles （PANI-TiO2） were characterized with the FT-IR, XRD, SEM and TEM techniques. Results confirmed that PANI was grafted successfully on the surface of TiO2 nanoparticles, therefore agglomeration of nanoparticles decreased dramatically. Polyvinyl chloride nanocomposites filled with 1 wt%-5 wt% of PANI-TiO2 and TiO2 nanoparticles were prepared via the solution blending method. PVC nanocomposites were analyzed with FT-IR, XRD, SEM, TG/DTA, DSC and tensile test techniques. Effect of PANI as surface modifier of nanoparticles was discussed according to the final properties of PVC nanocomposites. Results demonstrated that deposition of PANI on the surface of TiO2 nanoparticles improved the interfacial adhesion between the constituents of nanocomposites, which resulted in better dispersion of nanoparticles in the PVC matrix. Also PVC/PANI-TiO2 nanocomposites showed higher thennal resistance, tensile strength and Young＇s modulus compared to those of unfilled PVC and PVC/TiO2 nanocomposites.
文摘Given the nonuse of TiO2 nanoparticles as the reinforcement of AA2024 alloy in fabricating composites by ex-situ casting methods,it was decided to process the AA2024−xTiO2(np)(x=0,0.5 and 1 vol.%)nanocomposites by employing the stir casting method.The structural properties of the produced samples were then investigated by optical microscopy and scanning electron microscopy;their mechanical properties were also addressed by hardness and tensile tests.The results showed that adding 1 vol.%TiO2 nanoparticles reduced the grain size and dendrite arm spacing by about 66%and 31%,respectively.Also,hardness,ultimate tensile strength,yield strength,and elongation of AA2024−1vol.%TiO2(np)composite were increased by about 25%,28%,4%and 163%,respectively,as compared to those of the monolithic component.The agglomerations of nanoparticles in the structure of nanocomposites were found to be a factor weakening the strength against the strengthening mechanisms.Some agglomerations of nanoparticles in the matrix were detected on the fractured surfaces of the tension test specimens.
基金Supported by the National Basic Research Program of China("973"Program,No.2014CB239300,No.2012CB720100)National Natural Science Foundation of China(No.21406164,No.21466035)Specialized Research Fund for the Doctoral Program of Higher Education of China(No.20110032110037,No.20130032120019)
文摘An efficient visible-light-responsive BiOBr/TiO2 heterojunction nanocomposite was fabricated successfully using in-situ depositing technique at room temperature by introducing BiOBr onto the surface of TiO2 nano- belts pre-prepared by hydrothermal reaction and etched with H2SO4. The obtained particles were characterized by XRD, SEM, TEM, XPS, UV-Vis DRS and PL techniques. BiOBr/TiO2 heterojunction nanocomposites with different mass ratios of m （BiOBr）/m （TiO2） were discussed in order to get the best photocatalytie activity, and BiOBr/TiO2-1.0 was proved to be the optimal mass ratio. BiOBr/TiO2-1.0 exhibited excellent photocatalytic activity in the degradation of RhB compared with TiO2 nanobelts, pure BiOBr and the mechanical mixture of TiO2 nanobelts and BiOBr. At last, a possible mechanism ofphotocatalytic enhancement was proposed.
基金Funded by National "973" Plan Research Project ( No.2004CB619204) and Educational Ministry Scientific and Technologi-cal Research Key Project (No.02052)
文摘Titanium dioxide/ kaolinite nanocomposite was prepared by the sol-gel method, with layered kaolinite as a substrate and Ti （ OC4H9 ）4 as a precursor. The effects of hydrolysis, drying and calcination on the production of nanometric titanium dioxide were discussed. The optimal conditions for preparation were＂ bbtained through experiments. The 1- 10 nrn thick monolayer anatase nano TiO2 crystal was produced under the conditions as follows： hydrolyzed at 37-42 ℃ for 4 h, dried at 70-80 ℃ for 1 h, and calcined at 550-650℃ for 3 h. The rate of degradation of 40 mg/ L azo dye and 20 mg/ L acid red dye can reuch 96% and 81.45%, respectively.
基金supported by the National Natural Science Foundation of China(U1401245,91622119)the Program for Innovative Research Team in Chinese Universities(IRT1237)+1 种基金the Research Project of Chinese Ministry of Education(213011A)the Science Foundation for Excellent Youth of Harbin City of China(2014RFYXJ002)~~
文摘One of the most general methods to enhance the separation of photogenerated carriers for g‐C3N4is to construct a suitable heterojunctional composite,according to the principle of matching energy levels.The interface contact in the fabricated nanocomposite greatly influences the charge transfer and separation so as to determine the final photocatalytic activities.However,the role of interface contact is often neglected,and is rarely reported to date.Hence,it is possible to further enhance the photocatalytic activity of g‐C3N4‐based nanocomposite by improving the interfacial connection.Herein,phosphate-oxygen(P-O)bridged TiO2/g‐C3N4nanocomposites were successfully synthesized using a simple wet chemical method,and the effects of the P-O functional bridges on the photogenerated charge separation and photocatalytic activity for pollutant degradation and CO2reduction were investigated.The photocatalytic activity of g‐C3N4was greatly improved upon coupling with an appropriate amount of nanocrystalline TiO2,especially with P-O bridged TiO2.Atmosphere‐controlled steady‐state surface photovoltage spectroscopy and photoluminescence spectroscopy analyses revealed clearly the enhancement of photogenerated charge separation of g‐C3N4upon coupling with the P-O bridged TiO2,resulting from the built P-O bridges between TiO2and g‐C3N4so as to promote effective transfer of excited electrons from g‐C3N4to TiO2.This enhancement was responsible for the improved photoactivity of the P-O bridged TiO2/g‐C3N4nanocomposite,which exhibited three‐time photocatalytic activity enhancement for2,4‐dichlorophenol degradation and CO2reduction compared with bare g‐C3N4.Furthermore,radical‐trapping experiments revealed that the·OH species formed as hole‐modulated direct intermediates dominated the photocatalytic degradation of2,4‐dichlorophenol.This work provides a feasible strategy for the design and synthesis of high‐performance g‐C3N4‐based nanocomposite photocatalysts for pollutant degradation and CO2reduction.
基金This work was supported by the National and Zhejiang Provincial Natural Science Foundation of China (No. 59773012).
文摘A resistive humidity sensor was prepared based on sodium polystyrenesulfonate (NaPSS)/TiO2 nanocomposites, and its electrical response to humidity was examined. The sensor exhibits better linearity, smaller hysteresis (< 4% RH) and quicker response (absorption: less than 2 s; desorption: less than 20 s) in comparison with sensor composed of NaPSS. The effect of concentration of NaPSS and TiO2 on humidity response of sensors was discussed.
基金supported by FCT-Fundacao para a Ciencia e Tecnologia under the project PTDC/CTM NAN/113021/2009O.C.Monteiro acknowledges PEst-OE/QUI/UI0612/2013 and Programme Ciencia 2007
文摘This work is focused on the combination of two building-blocks, nanocrystalline TiO2 particles and polyaniline conductive films （PAni）. The preparation of new nanostructured composite materials, displaying electron- and proton-conductive properties, to be used for the fabrication of new and superior energy storage devices was envisaged. The semiconducting TiO2 nanoparticles were obtained by means of a hydrothermal route. The PAni films were prepared on glassy carbon electrodes by electrochemical polymerization, under potential dynamic conditions. After characterization by X-ray diffraction, transmission electron microscopy or scanning electron microscopy and electrochemical techniques, the nanocrystalline particles were immobilized in the polymer matrix. The incorporation of the TiO2 was achieved using two distinct approaches： during the polymer growth or by deposition over previously prepared PAni films. The results demonstrate that the PAni morphology depends on the experimental conditions used during the polymer growth. After TiO2 immobilization, the best electrochemical response was obtained for the nanocomposite structure produced through the TiO2 incorporation after the PAni film synthesis. The modified electrodes were structurally and morphologically characterized and their electro-catalytic activity towards the hydrogen evolution reaction was analyzed. A new electrochemical performance related with the oxidation of molecular hydrogen entrapped in the PAni-TiO2 matrix was observed for the modified electrode after TiO2 incorporation. This behavior can be directly associated with the synergetic combination of the TiO2 and PAni, and is dependent on the amount of the semiconductor.
基金Project (20060532006) supported by Specialized Research Fund for the Doctoral Program of Higher Education
文摘A new nanocomposite material for construction of glucose biosensor was prepared. The biosensor was formed by entrapping glucose oxidase(Gox) into chitosan/nanoporous ZrO2/multiwalled carbon nanotubes nanocomposite film. In this biosensing thin film, the multiwalled carbon nanotubes can effectively catalyze hydrogen peroxide and nanoporous ZrO2 can enhance the stability of the immobilized enzyme. The resulting biosensor provides a very effective matrix for the immobilization of glucose oxidase and exhibits a wide linear response range from 8 μmol/L to 3 mmol/L with a correlation coefficient of 0.994 for the detection of glucose. And the response time and detection limit of the biosensor are determined to be 6 s and 3.5 μmol/L, respectively. Another attractive characteristic is that the biosensor is inexpensive, stable and reliable.
文摘以 Sn Cl4· Ti( OBu) 4、氨水、乙醇为原料 ,采用活性层包覆法 ,制备出 Ti O2 / Sn O2 复合光催化剂 ,并用IR、XRD、TEM和 BET等手段对样品进行了表征 .研究其对有机磷农药敌敌畏的光催化降解效果 ,与单一半导体催化剂 Sn O2 、Ti O2 做了简单对比 .结果表明 :所制 Ti O2 / Sn O2 样品为包覆型结构 ,由锐钛矿型 Ti O2 金红石型 Sn O2 组成 ,与 Sn O2 及 Ti O2 晶体粉末相比所制 Ti O2 / Sn O2 包覆粒子光催化活性得到明显提高 .
基金Project(2016YFE0205700)supported by the National Key Research and Development Program of ChinaProject(18JCYBJC18000)supported by the Natural Science Foundation of Tianjin City,China。
文摘Co−TiO2 nanocomposite films were prepared via magnetron sputtering at various substrate temperatures.The films comprise Co particles dispersed in an amorphous TiO2 matrix and exhibit coexisting ferromagnetic and superparamagnetic properties.When the substrate temperature increases from room temperature to 400℃,Co particles gradually grow,and the degree of Co oxidation significantly decreases.Consequently,the saturation magnetization increases from 0.13 to 0.43 T at the same Co content by increasing the substrate temperature from room temperature to 400℃.At a high substrate temperature,conductive pathways form among some of the clustered Co particles.Thus,resistivity rapidly declines from 1600 to 76μΩ·m.The magnetoresistive characteristic of Co−TiO2 films is achieved even at resistivity of as low as 76μΩ·m.These results reveal that the obtained nanocomposite films have low Co oxidation,high magnetization and magnetoresistance at room temperature.
基金Funded by the National Natural Science Foundation of China(No.50575049)
文摘ZrO2/Ni nanocomposite was produced by pulse electrodeposition and its superplastic properties were investigated by the tensile and bulging tests. The as-deposited nickel matrix has a narrow grain size distribution with a mean grain size of 45 nm. A maximum elongation of 605% was observed at 723 K and a strain rate of 1.67×10-3s-1 by tensile test. Superplastic bulging tests were subsequently performed using dies with diameters of 1 mm and 5 mm respectively based on the optimal superplastic forming temperature. The effects of forming temperature and gas pressure on bulging process were experimentally investigated. The results indicated that ZrO2/Ni nanocomposite samples can be readily bulged at 723 K with H/d value （defined as dome apex height over the die diameter） larger than 0.5, indicating that the nanocomposite has good bulging ability. SEM and TEM were used to examine the microstructure of the as-deposited and bulged samples. The observations showed that significant grain coarsening occurs during superplastic bulging, and the microstructure is found to depend on the forming temperature.
