The steel industry produces many byproducts, requiring extensive land for storage and causing significant environmental contamination. Industrial effluents discharged into water bodies negatively impact both aquatic e...The steel industry produces many byproducts, requiring extensive land for storage and causing significant environmental contamination. Industrial effluents discharged into water bodies negatively impact both aquatic ecosystems and human health. To solve this problem, this study synthesized a composite of titanium dioxide (TiO2) and steel slag nanocomposites (SSNC) at a 1:2 mass ratio to create a robust photocatalyst for the treatment of synthetic wastewater. The efficacy of this catalyst in degrading various dye pollutants, including methylene blue (MB), was tested under simulated solar light conditions. Comprehensive analyses were conducted to assess the physical and chemical characteristics, crystalline structure, energy gap, and point of zero charge of the composite. The TiO2-SSNC composite catalyst exhibited excellent stability, with a point of zero charge at 8.342 and an energy gap of 2.4 eV. The degradation process conformed to pseudo-first-order kinetics. Optimization of operational parameters was achieved through the response surface methodology. Reusability tests demonstrated that the TiO2-SSNC composite catalyst effectively degraded up to 93.41% of MB in the suspended mode and 92.03% in the coated mode after five cycles. Additionally, the degradation efficiencies for various dyes were significant, highlighting the potential of the composite for broad applications in industrial wastewater treatment. This study also explored the degradation mechanisms and identified byproducts, establishing a pathway for contaminant breakdown. The cost-benefit analysis revealed a total cost of 0.842 8 USD per cubic meter for each treatment activity, indicating low operational and production costs. These findings underscore the promise of the TiO2-SSNC composite as a cost-effective and efficient alternative for wastewater purification.展开更多
A TiO2 nanofilm was prepared on the surface of AZ31 magnesium alloy with controllable thickness through atomic layer deposition(ALD) technique, which can adjust the corrosion behaviors of AZ31 Mg alloy.Compared with t...A TiO2 nanofilm was prepared on the surface of AZ31 magnesium alloy with controllable thickness through atomic layer deposition(ALD) technique, which can adjust the corrosion behaviors of AZ31 Mg alloy.Compared with the untreated Mg alloys, corrosion current densities(icorr)can decline by 58% in the 200-cycles TiO2-covered Mg alloy and further decline by up to 74% with the thickness of nanofilm up to 63 nm(400 cycles).The subsequent modification with a cross-linked conversion layer of 3-aminopropyltriethoxysilane(APTES) by a dipping method can produce a compact silane coating on TiO2 nanofilm, which can seal pinholes of TiO2 nanofilm and serve as a barrier to further adjust the corrosion behavior of the substrate.The icorrcan decline about two orders of magnitude in the TiO2/silane composite coating.Making the adjustable corrosion rate come true, which can be attributed to the precise control on the thickness of metal oxide nanofilm and additional protection from the compact silane coating.In vitro study discloses that the TiO2/silane hybrid coating shows higher expression of alkaline phosphatase(ALP)and can promote cellular adhesion and proliferation with better cytocompatibility than untreated Mg alloy.展开更多
Cu2O/TiOa/Pt three-layer films were deposited on glass substrates using magnetron sputtering method. The surface morphology and the optical properties of the composite film were characterized by X-ray diffraction （XR...Cu2O/TiOa/Pt three-layer films were deposited on glass substrates using magnetron sputtering method. The surface morphology and the optical properties of the composite film were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, ultraviolet- visible spectroscopy （UV-Vis） and photoluminescence spectroscopy （PL）. The photocatalytic activity of the samples was evaluated by the photocatalytic degradation of methyl orange （MO） aqueous solution under visible light irradiation. The results indicate that the Cu2O/TiO2/Pt composite films are made up of three layers which are Pt layer, anatase-TiO2 layer and Cu2O layer from bottom to top. The surface of the films is even and composed of regular-shaped spherical particles. The photocatalytic activity of the Cu2O/TiO2/Pt three-layer film is much higher than that of the Cu2O/TiO2 double-layer film. Such enhancement is ascribed to the presence of Pt layer, which further inhibits the photogenerated electron-hole recombination, prolongs the lifetime of the photogenerated carriers, increases the quantum efficiency and hence improves the photocatalytic activity of the film effectively.展开更多
Co−TiO2 nanocomposite films were prepared via magnetron sputtering at various substrate temperatures.The films comprise Co particles dispersed in an amorphous TiO2 matrix and exhibit coexisting ferromagnetic and super...Co−TiO2 nanocomposite films were prepared via magnetron sputtering at various substrate temperatures.The films comprise Co particles dispersed in an amorphous TiO2 matrix and exhibit coexisting ferromagnetic and superparamagnetic properties.When the substrate temperature increases from room temperature to 400℃,Co particles gradually grow,and the degree of Co oxidation significantly decreases.Consequently,the saturation magnetization increases from 0.13 to 0.43 T at the same Co content by increasing the substrate temperature from room temperature to 400℃.At a high substrate temperature,conductive pathways form among some of the clustered Co particles.Thus,resistivity rapidly declines from 1600 to 76μΩ·m.The magnetoresistive characteristic of Co−TiO2 films is achieved even at resistivity of as low as 76μΩ·m.These results reveal that the obtained nanocomposite films have low Co oxidation,high magnetization and magnetoresistance at room temperature.展开更多
TiO2 thin films were prepared by DC magnetron sputtering with the oxygen flow rate higher than the threshold. The film deposited for 5 h was of anatase phase with a preferred orientation along the <220> directio...TiO2 thin films were prepared by DC magnetron sputtering with the oxygen flow rate higher than the threshold. The film deposited for 5 h was of anatase phase with a preferred orientation along the <220> direction, but the films deposited for 2 and 3 h were amorphous. The transmittance and photocatalytic activity of the TiO2 films increased constantly with increasing film thickness. When the annealing temperature was lower than 700℃, only anatase grew in the TiO2 film. TiO2 phase changed from anatase to rutile when the annealing temperature was above 800℃. The photocatalytic activity decreased with increasing annealing temperature.展开更多
Mo-C codoped TiO2 films were prepared by RF magnetron cosputtering. Ultraviolet-visible spectroscopy, atomic force microscopy, X-ray photoelectron spectroscopy, energy dispersive X-ray Analysis and X-Ray Diffraction w...Mo-C codoped TiO2 films were prepared by RF magnetron cosputtering. Ultraviolet-visible spectroscopy, atomic force microscopy, X-ray photoelectron spectroscopy, energy dispersive X-ray Analysis and X-Ray Diffraction were used to study the influences of codoping on energy gap, surface morphology, valence states of elements, ions content and crystal structure, respectively. The concentration of photogenerated carriers was measured by studying photocurrent density, while catalytic property was evaluated by observing degradation rate of methylene blue under visible light. A Mo-doped TiO2 film, whose content of Mo had been optimized in advance, was prepared and later used for subsequent comparisons with codoped samples. The result indicates that Mo-C codoping could curtail the energy gap and shift the absorption edge toward visible range. Under the illumination of visible light, codoped TiO2 films give rise to stronger photocurrent due to smaller band gaps. It is also found that Mo, C codoping results in a porous surface, whose area declines gradually with increasing carbon content. Carbon and Molybdenum doses were delicately optimized. Under the illumination of visible light, sample doped with 9.78at% carbon and 0.36at% Mo presents the strongest photocurrent which is about 8 times larger than undoped TiO2 films, and about 6 times larger than samples doped with Mo only.展开更多
采用溶胶-凝胶浸渍提拉法在石英玻璃片上制备了Ag/TiO2薄膜。为研究不同热处理温度(500,600,700℃)对制备过程的影响,在薄膜的制备过程中其他的条件均不变(钛酸丁酯和硝酸银的摩尔比为1:0.18)。用透射电子显微镜(Transmission Electron ...采用溶胶-凝胶浸渍提拉法在石英玻璃片上制备了Ag/TiO2薄膜。为研究不同热处理温度(500,600,700℃)对制备过程的影响,在薄膜的制备过程中其他的条件均不变(钛酸丁酯和硝酸银的摩尔比为1:0.18)。用透射电子显微镜(Transmission Electron Microscope,TEM)记录样品的透射显微镜图像和衍射花样以表征薄膜的结构,用背散射电子(Backscattered Electron,BSE)检测器观察样品表面的组分分布,用能谱EDAX(Energy Dispersive Analysis of X-rays)分析Ag/TiO2薄膜样品的元素成分组成。实验结果表明,500℃热处理时得到了含有尺寸均匀的纳米银粒子的Ag/TiO2膜,随着热处理温度的升高,Ag的颗粒逐渐长大,尺寸分布变得不均匀,同时,膜中的银逐渐向薄膜表面迁移并挥发。展开更多
基金supported by the Department of Chemical and Petrochemical Engineering,Egypt-Japan University of Science and Technology.
文摘The steel industry produces many byproducts, requiring extensive land for storage and causing significant environmental contamination. Industrial effluents discharged into water bodies negatively impact both aquatic ecosystems and human health. To solve this problem, this study synthesized a composite of titanium dioxide (TiO2) and steel slag nanocomposites (SSNC) at a 1:2 mass ratio to create a robust photocatalyst for the treatment of synthetic wastewater. The efficacy of this catalyst in degrading various dye pollutants, including methylene blue (MB), was tested under simulated solar light conditions. Comprehensive analyses were conducted to assess the physical and chemical characteristics, crystalline structure, energy gap, and point of zero charge of the composite. The TiO2-SSNC composite catalyst exhibited excellent stability, with a point of zero charge at 8.342 and an energy gap of 2.4 eV. The degradation process conformed to pseudo-first-order kinetics. Optimization of operational parameters was achieved through the response surface methodology. Reusability tests demonstrated that the TiO2-SSNC composite catalyst effectively degraded up to 93.41% of MB in the suspended mode and 92.03% in the coated mode after five cycles. Additionally, the degradation efficiencies for various dyes were significant, highlighting the potential of the composite for broad applications in industrial wastewater treatment. This study also explored the degradation mechanisms and identified byproducts, establishing a pathway for contaminant breakdown. The cost-benefit analysis revealed a total cost of 0.842 8 USD per cubic meter for each treatment activity, indicating low operational and production costs. These findings underscore the promise of the TiO2-SSNC composite as a cost-effective and efficient alternative for wastewater purification.
基金financially supported by the Natural Science Fund of Hubei Province (No.2018CFA064)the National Natural Science Foundation of China (NSFC) (Nos.51671081 and 51422102)+4 种基金the National Key Research and Development Program of China (No.2016YFC1100600, sub-project 2016YFC1100604)the Hong Kong Research Grants Council (RGC) General Research Funds (GRF) (Nos.11301215, 11205617 and 17214516)RGC/NSFC (N_HKU725-16)the Hong Kong Innovation and Technology Commission (ITC) (Nos.ITS/287/17 and GHX/002/14SZ)the Health and Medical Research Fund (No.03142446)
文摘A TiO2 nanofilm was prepared on the surface of AZ31 magnesium alloy with controllable thickness through atomic layer deposition(ALD) technique, which can adjust the corrosion behaviors of AZ31 Mg alloy.Compared with the untreated Mg alloys, corrosion current densities(icorr)can decline by 58% in the 200-cycles TiO2-covered Mg alloy and further decline by up to 74% with the thickness of nanofilm up to 63 nm(400 cycles).The subsequent modification with a cross-linked conversion layer of 3-aminopropyltriethoxysilane(APTES) by a dipping method can produce a compact silane coating on TiO2 nanofilm, which can seal pinholes of TiO2 nanofilm and serve as a barrier to further adjust the corrosion behavior of the substrate.The icorrcan decline about two orders of magnitude in the TiO2/silane composite coating.Making the adjustable corrosion rate come true, which can be attributed to the precise control on the thickness of metal oxide nanofilm and additional protection from the compact silane coating.In vitro study discloses that the TiO2/silane hybrid coating shows higher expression of alkaline phosphatase(ALP)and can promote cellular adhesion and proliferation with better cytocompatibility than untreated Mg alloy.
基金financially supported by the National Natural Science Foundation of China (No.51301118)the Projects of International Cooperation in Shanxi (No.2014081002)the Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi (No.2013108)
文摘Cu2O/TiOa/Pt three-layer films were deposited on glass substrates using magnetron sputtering method. The surface morphology and the optical properties of the composite film were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, ultraviolet- visible spectroscopy （UV-Vis） and photoluminescence spectroscopy （PL）. The photocatalytic activity of the samples was evaluated by the photocatalytic degradation of methyl orange （MO） aqueous solution under visible light irradiation. The results indicate that the Cu2O/TiO2/Pt composite films are made up of three layers which are Pt layer, anatase-TiO2 layer and Cu2O layer from bottom to top. The surface of the films is even and composed of regular-shaped spherical particles. The photocatalytic activity of the Cu2O/TiO2/Pt three-layer film is much higher than that of the Cu2O/TiO2 double-layer film. Such enhancement is ascribed to the presence of Pt layer, which further inhibits the photogenerated electron-hole recombination, prolongs the lifetime of the photogenerated carriers, increases the quantum efficiency and hence improves the photocatalytic activity of the film effectively.
基金Project(2016YFE0205700)supported by the National Key Research and Development Program of ChinaProject(18JCYBJC18000)supported by the Natural Science Foundation of Tianjin City,China。
文摘Co−TiO2 nanocomposite films were prepared via magnetron sputtering at various substrate temperatures.The films comprise Co particles dispersed in an amorphous TiO2 matrix and exhibit coexisting ferromagnetic and superparamagnetic properties.When the substrate temperature increases from room temperature to 400℃,Co particles gradually grow,and the degree of Co oxidation significantly decreases.Consequently,the saturation magnetization increases from 0.13 to 0.43 T at the same Co content by increasing the substrate temperature from room temperature to 400℃.At a high substrate temperature,conductive pathways form among some of the clustered Co particles.Thus,resistivity rapidly declines from 1600 to 76μΩ·m.The magnetoresistive characteristic of Co−TiO2 films is achieved even at resistivity of as low as 76μΩ·m.These results reveal that the obtained nanocomposite films have low Co oxidation,high magnetization and magnetoresistance at room temperature.
基金supported by the National Natural Science Foundation of China(No.50001013)Hundred-Talent Project of CAS and the NSFC for Outstanding Young Scientists(No.59625103).
文摘TiO2 thin films were prepared by DC magnetron sputtering with the oxygen flow rate higher than the threshold. The film deposited for 5 h was of anatase phase with a preferred orientation along the <220> direction, but the films deposited for 2 and 3 h were amorphous. The transmittance and photocatalytic activity of the TiO2 films increased constantly with increasing film thickness. When the annealing temperature was lower than 700℃, only anatase grew in the TiO2 film. TiO2 phase changed from anatase to rutile when the annealing temperature was above 800℃. The photocatalytic activity decreased with increasing annealing temperature.
基金Funded by Chinese National Key Scientific Projects(No.2012CB934303)the Guizhou Education Foundation(KY[2015]332)
文摘Mo-C codoped TiO2 films were prepared by RF magnetron cosputtering. Ultraviolet-visible spectroscopy, atomic force microscopy, X-ray photoelectron spectroscopy, energy dispersive X-ray Analysis and X-Ray Diffraction were used to study the influences of codoping on energy gap, surface morphology, valence states of elements, ions content and crystal structure, respectively. The concentration of photogenerated carriers was measured by studying photocurrent density, while catalytic property was evaluated by observing degradation rate of methylene blue under visible light. A Mo-doped TiO2 film, whose content of Mo had been optimized in advance, was prepared and later used for subsequent comparisons with codoped samples. The result indicates that Mo-C codoping could curtail the energy gap and shift the absorption edge toward visible range. Under the illumination of visible light, codoped TiO2 films give rise to stronger photocurrent due to smaller band gaps. It is also found that Mo, C codoping results in a porous surface, whose area declines gradually with increasing carbon content. Carbon and Molybdenum doses were delicately optimized. Under the illumination of visible light, sample doped with 9.78at% carbon and 0.36at% Mo presents the strongest photocurrent which is about 8 times larger than undoped TiO2 films, and about 6 times larger than samples doped with Mo only.
文摘采用溶胶-凝胶浸渍提拉法在石英玻璃片上制备了Ag/TiO2薄膜。为研究不同热处理温度(500,600,700℃)对制备过程的影响,在薄膜的制备过程中其他的条件均不变(钛酸丁酯和硝酸银的摩尔比为1:0.18)。用透射电子显微镜(Transmission Electron Microscope,TEM)记录样品的透射显微镜图像和衍射花样以表征薄膜的结构,用背散射电子(Backscattered Electron,BSE)检测器观察样品表面的组分分布,用能谱EDAX(Energy Dispersive Analysis of X-rays)分析Ag/TiO2薄膜样品的元素成分组成。实验结果表明,500℃热处理时得到了含有尺寸均匀的纳米银粒子的Ag/TiO2膜,随着热处理温度的升高,Ag的颗粒逐渐长大,尺寸分布变得不均匀,同时,膜中的银逐渐向薄膜表面迁移并挥发。
