期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
Ti/SnO_2+Sb_2O_4/PbO_2阳极的制备及其在酸性电解体系中的应用 被引量:3
1
作者 杨小勇 竺培显 +1 位作者 司云森 周生刚 《热加工工艺》 CSCD 北大核心 2014年第10期91-93,100,共4页
实验针对酸性电解体系中阳极的析氧过程,研究制备出适应于在此类介质中使用的Ti/SnO2+Sb2O4/PbO2阳极。采用SEM、XRD法表征了阳极的表面形貌、组成元素和元素化学态;并用快速电极寿命法测试该阳极在65℃、1.0mol/LH2SO4溶液中的使用寿... 实验针对酸性电解体系中阳极的析氧过程,研究制备出适应于在此类介质中使用的Ti/SnO2+Sb2O4/PbO2阳极。采用SEM、XRD法表征了阳极的表面形貌、组成元素和元素化学态;并用快速电极寿命法测试该阳极在65℃、1.0mol/LH2SO4溶液中的使用寿命通过对电极极化曲线的测试,考察其电催化性能;将试样放大后在酸性电解体系中进行模拟电解生产试验。结果表明,此类阳极与传统铅阳极相比,在提高电流效率,降低单耗以及提高阴极产品纯度方面效果显著,且降低了阳极制作成本。 展开更多
关键词 阳极 ti sno2+sb2o4 pbo2阳极 铅阳极 酸性电解体系
原文传递
Ti/SnO_2+Sb_2O_3+MnO_2/PbO_2阳极的性能研究 被引量:23
2
作者 梁镇海 孙彦平 《无机材料学报》 SCIE EI CAS CSCD 北大核心 2001年第1期183-187,共5页
制备了一种非贵金属阳极-Ti/SnO2+Sb2O3+MnO2/PbO2,并用XRD、SEM进行了表征,计算出了电极的分形维数,测定了该电极在硫酸中的使用寿命和动力学参数,把该电极用于处理含酚废水和Pb电极进行对比.结... 制备了一种非贵金属阳极-Ti/SnO2+Sb2O3+MnO2/PbO2,并用XRD、SEM进行了表征,计算出了电极的分形维数,测定了该电极在硫酸中的使用寿命和动力学参数,把该电极用于处理含酚废水和Pb电极进行对比.结果表明,节电33%,转化率达95%,是一种优良的电化学催化剂. 展开更多
关键词 ti/sno2+sb2o3+Mno2/pbo2阳极 废水处理 分形维
在线阅读 下载PDF
高析氧过电位Ti/SnO_2+Sb_2O_4阳极的制备及性能 被引量:6
3
作者 苗海霞 梁镇海 +1 位作者 樊彩梅 孙彦平 《太原理工大学学报》 CAS 北大核心 2006年第5期543-546,共4页
采用溶胶-凝胶涂层技术,以无机物SnCl2.2H2O,SbCl3为前驱物制备了Ti/SnO2+Sb2O4电极。电极的晶体结构通过XRD进行了表征,得知涂层中的SnO2是金红石结构,并计算出涂层氧化物属于纳米级,平均粒度为6.5 nm。考察了锑的掺入量和烧结温度对... 采用溶胶-凝胶涂层技术,以无机物SnCl2.2H2O,SbCl3为前驱物制备了Ti/SnO2+Sb2O4电极。电极的晶体结构通过XRD进行了表征,得知涂层中的SnO2是金红石结构,并计算出涂层氧化物属于纳米级,平均粒度为6.5 nm。考察了锑的掺入量和烧结温度对电极性能的影响,结果表明:锑原子质量分数为4%,烧结温度600℃为较佳工艺条件;电流密度10mA/cm2时,电极的析氧电位高达2.1182V(vs.NHE),说明Ti/SnO2+Sb2O4电极是一种优良的阳极电催化剂。 展开更多
关键词 溶胶-凝胶法 ti/sno2+sb2o4电极 阳极
在线阅读 下载PDF
Ti/SnO_2-Sb_2O_5/PbO_2阳极电化学氧化降解咪草烟及其过程监测 被引量:3
4
作者 薛斌 郭英伟 +1 位作者 王建雅 葛晓冬 《化学研究与应用》 CAS CSCD 北大核心 2007年第7期813-816,共4页
Methodology for the electrochemical decomposition of imazethapyr using Ti/SnO2-Sb2O5/PbO2 anode in Na2SO4 medium is suggested in this paper. The electrolysis reaction conditions were optimized. The process of electroc... Methodology for the electrochemical decomposition of imazethapyr using Ti/SnO2-Sb2O5/PbO2 anode in Na2SO4 medium is suggested in this paper. The electrolysis reaction conditions were optimized. The process of electrochemical decomposition was monitored by ultra-violet spectrophotometry and CODCr method. The electrochemical decomposition mechanism of imazethapyr was studied primarily by UV-VIS spectrophotometry. The effectiveness of the electrochemical pretreatment was proved by the comparative aerobic biological treatment test based on the activated sludge process. 展开更多
关键词 ti/sno2-sb2o5/pbo2阳极 电化学氧化 咪草烟 Na2So4电解质
在线阅读 下载PDF
Synthesis and electrochemical properties of Zn_2SnO_4 and Zn_2Sn_(0.8)Ti_(0.2)O_4/C
5
作者 袁万颂 田彦文 +1 位作者 刘丽娟 李建中 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2012年第4期858-864,共7页
Compound Zn2Sn0.8Ti0.2O4 was synthesized by a hydrothermal method in which SnCl4-5H2O,TiCl4,ZnCl2 and N2H4-H2O were used as reactants.The composite Zn2Sn0.8Ti0.2O4/C was then prepared through a carbothermic reduction ... Compound Zn2Sn0.8Ti0.2O4 was synthesized by a hydrothermal method in which SnCl4-5H2O,TiCl4,ZnCl2 and N2H4-H2O were used as reactants.The composite Zn2Sn0.8Ti0.2O4/C was then prepared through a carbothermic reduction process using the as-prepared Zn2Sn0.8Ti0.2O4 and glucose as reactants.The structure,morphology and electrochemical properties of the as-prepared products were investigated by XRD,XPS,TEM and electrochemical measurements.In addition,electrochemical Li insertion/extraction in composite Zn2Sn0.8Ti0.2O4/C were examined by ex situ XRD and SEM.The first discharge capacity of Zn2SnO4 is about 1670.8 mA-h/g,with a capacity retain of 342.7 mA-h/g in the 40th cycle at a constant current density of 100 mA/g in the voltage range of 0.05-3.0 V.Comparing with the Zn2SnO4,some improved electrochemical properties are obtained for Zn2Sn0.8Ti0.2O4,Zn2SnO4/C and Zn2Sn0.8Ti0.2O4/C.The composite Zn2Sn0.8Ti0.2O4/C shows the best electrochemical properties,and its first discharge capacity is about 1530.0 mA-h/g,with a capacity retain of 479.1 mA-h/g the 100th cycle. 展开更多
关键词 Zn2sno4 Zn2Sn0.8ti0.2o4/C titanium substitution lithium ion batteries anode materials
在线阅读 下载PDF
流化床中光电联合降解苯酚的研究
6
作者 杨丽萍 《太原科技》 2008年第9期25-27,共3页
采用光电催化反应器对水中苯酚进行降解实验,通过观察不同光催化载体、阳极和阴极对光电催化反应的影响,结果表明:活性炭是光催化剂的良好载体,TiO2/C光催化剂活性稳定,Ti/SnO2+Sb2O3/PbO2和气体扩散电极对光催化有良好的促进作用,并且... 采用光电催化反应器对水中苯酚进行降解实验,通过观察不同光催化载体、阳极和阴极对光电催化反应的影响,结果表明:活性炭是光催化剂的良好载体,TiO2/C光催化剂活性稳定,Ti/SnO2+Sb2O3/PbO2和气体扩散电极对光催化有良好的促进作用,并且光电联合降解明显优于光催化、电催化过程。 展开更多
关键词 光电催化 ti/sno2+sb2o3/pbo2电极 气体扩散电极 苯酚
在线阅读 下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部