BACKGROUND Percutaneous transhepatic biliary drainage(PTBD)is one of the primary clinical treatment options for patients with obstructive jaundice.In recent years,PTBD assisted by three-dimensional(3D)reconstruction t...BACKGROUND Percutaneous transhepatic biliary drainage(PTBD)is one of the primary clinical treatment options for patients with obstructive jaundice.In recent years,PTBD assisted by three-dimensional(3D)reconstruction technology has been widely implemented,but its advantages over traditional methods remains inconclusive.Thus,a discussion is warranted.AIM To explore the safety and efficacy of 3D reconstruction technology-assisted PTBD.METHODS We systematically searched the databases including the Cochrane Library,PubMed,EMBASE,Web of Science and China National Knowledge Infrastructure.The search period extended from the establishment of each database to November,2024.We screened the literature according to predefined inclusion and exclusion criteria,assessed the quality of the studies,and extracted data.Meta-analysis was performed using Revman 5.4.1 software.RESULTS A total of 15 studies were included,involving 1434 patients.The results of the meta-analysis showed that compared with the traditional group,the overall post-operative complications rate in the 3D reconstruction technology group was significantly lower[odds ratio=0.25;95%confidence interval(CI):0.17-0.36,P<0.00001].The overall puncture success rate in the 3D reconstruction group was better than those in the traditional group(odds ratio=3.61;95%CI:1.98-6.55,P<0.0001).However,there was no significant difference between the two groups in the reduction levels of postoperative total bilirubin(mean difference=-1.38;95%CI:-3.29 to 0.53,P=0.16).Subgroup analysis were conducted on the surgery time according to guidance stages of the 3D reconstruction,3D reconstruction imaging modalities,and types of studies.The results were stable,with no significant changes observed.CONCLUSION 3D reconstruction technology significantly improves the puncture success rate and safety of PTBD.However,it has no significant advantage in bile drainage effectiveness.Continued research is warranted to further explore its clinical value and optimize its application.展开更多
The core sampling experiments were conducted after hydraulic fracturing in the three-dimensional development zone of Fuling shale gas.Six coring wells of different well types were systematically designed.Based on the ...The core sampling experiments were conducted after hydraulic fracturing in the three-dimensional development zone of Fuling shale gas.Six coring wells of different well types were systematically designed.Based on the integrated engineering technology of post-fracturing drilling,coring and monitoring of shale and the analysis of fracture source tracing,the evaluation of the fracture network after fracturing in the three-dimensional development of shale gas was conducted.The data of core fractures after fracturing indicate that three major types of fractures are formed after fracturing:natural fractures,hydraulic fractures,and fractures induced by external mechanical force,which are further classified into six subcategories:natural structural fractures,natural bedding fractures,hydraulic fractures,hydraulically activated fractures,drilling induced fractures,and fractures induced by core transportation.The forms of the artificial fracture network after fracturing are complex.Hydraulic fractures and hydraulically activated fractures interweave with each other,presenting eight forms of artificial fracture networks,among which the“一”-shaped fracture is the most common,accounting for approximately 70%of the total fractures.When the distance to the fractured wellbore is less than 35 m,the density of the artificial fracture network is relatively high;when it is 35–100 m,the density is lower;and when it is beyond 100 m,the density gradually increases.The results of the fracture tracing in the core sampling area confirm that the current fracturing technology can essentially achieve the differential transformation of the reservoir in the main area of Jiaoshiba block in Fuling.The three-layer three-dimensional development model can efficiently utilize shale gas reserves,although there is still room for improvement in the complexity and propagation uniformity of fractures.It is necessary to further optimize technologies such as close-cutting combined with temporary blocking and deflection within fractures or at fracture mouths,as well as limited flow perforation techniques,to promote the balanced initiation and extension of fractures.展开更多
With the accelerating aging process of China’s population,the demand for community elderly care services has shown diversified and personalized characteristics.However,problems such as insufficient total care service...With the accelerating aging process of China’s population,the demand for community elderly care services has shown diversified and personalized characteristics.However,problems such as insufficient total care service resources,uneven distribution,and prominent supply-demand contradictions have seriously affected service quality.Big data technology,with core advantages including data collection,analysis and mining,and accurate prediction,provides a new solution for the allocation of community elderly care service resources.This paper systematically studies the application value of big data technology in the allocation of community elderly care service resources from three aspects:resource allocation efficiency,service accuracy,and management intelligence.Combined with practical needs,it proposes optimal allocation strategies such as building a big data analysis platform and accurately grasping the elderly’s care needs,striving to provide operable path references for the construction of community elderly care service systems,promoting the early realization of the elderly care service goal of“adequate support and proper care for the elderly”,and boosting the high-quality development of China’s elderly care service industry.展开更多
According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing ...According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing differential equations are derived by the Hamilton's variational principle,and then solved by the iterative Separation-of-Variable(i SOV)method,which are applicable to arbitrary combinations of homogeneous Boundary Conditions(BCs).However,only the simply-support,clamped and cantilever panels are considered in this work for the sake of clarity.With the closed-form eigensolutions,the flutter frequency,flutter mode and flutter boundary are presented,and the effect of shear deformation and aerodynamic damping on flutter frequencies is investigated.Besides,the relation between panel energy and the work of aerodynamic load is discussed.The numerical comparisons reveal the following.(A)The flutter eigenvalues obtained by the present method are accurate,validated by the Finite Element Method(FEM)and the Galerkin method.(B)When the span-chord ratio is larger than 3,simplifying a 3D panel to 2D(two-dimensional)panel is reasonable and the relative differences of the flutter points predicted by the two models are less than one percent.(C)The reciprocal relationship between the mechanical energy of the panel and the work done by aerodynamic load is verified by using the present flutter eigenvalues and modes,further indicating the high accuracy of the present solutions.(D)The coupling of shear deformation and aerodynamic damping prevents frequency coalescing.展开更多
In response to the Ministry of Education’s requirements for building distinctive model software schools,Software College of Northeastern University and Shenzhen Kingdom Technology Co.,Ltd.jointly developed the specia...In response to the Ministry of Education’s requirements for building distinctive model software schools,Software College of Northeastern University and Shenzhen Kingdom Technology Co.,Ltd.jointly developed the specialized course“Application and Practice of RPA Technology in FinTech”.Addressing pain points in financial digital transformation,the course integrates robotic process automation(RPA)principles,financial domain knowledge,and RPA platform practice into a“technology-scenario-capability”trinity teaching system.Through 64 credit hours of integrated theory and practice,it covers RPA fundamentals,financial applications,RPA operations(including core skills like Web/desktop automation),and AI integration,cultivating students’ability to design and implement automated financial workflows.It innovatively features a RPA simulation platform,30+financial case studies,and modular task resources,creating a“teacher-machine-student”interactive model.Practice demonstrates the course effectively enhances students’integration of technical application and business acumen,providing a scalable paradigm for cultivating interdisciplinary FinTech talent.展开更多
The moment a media delegation from the Republic of the Congo arrived at the Othello Kitchenware Museum on 18 November 2025,they were greeted with a vivid show of Guangdong’s industrial strength.Standing before them w...The moment a media delegation from the Republic of the Congo arrived at the Othello Kitchenware Museum on 18 November 2025,they were greeted with a vivid show of Guangdong’s industrial strength.Standing before them was not a typical exhibition hall,but a building shaped like a gleaming stainless-steel cooking pot.展开更多
Rare earth(RE)Y-type zeolite was synthesized in situ by acidic co-hydrolysis route and hydrothermal method.The key process parameters were optimized based on the RE utilization rate.The effect of inducing a rotating p...Rare earth(RE)Y-type zeolite was synthesized in situ by acidic co-hydrolysis route and hydrothermal method.The key process parameters were optimized based on the RE utilization rate.The effect of inducing a rotating packed bed(RPB)in premixing and crystallization on crystallinity and RE utilization rate was further investigated.The results indicate that lanthanide(La)cations are successfully introduced into the sodalite cage of Y-type zeolite.The optimized conditions are that the molar ratio of Si/La is 150,premixing for 5 h,crystallization at 90℃ for 18 h,and calcination at 550℃ for 3.5 h.At this stage,the RE utilization rate reaches 74.5%.Compared with the conventional stirred tank reactor(STR),RPB can effectively shorten the premixing time and crystallization time by 4.3 h and 6 h,improve the crystallinity by 23%and RE utilization rate by 7.5%.The RE utilization rate is more than 80%by RPB,surpassing the effectiveness of using the one-exchange one-calcination process in the traditional liquid ion exchange process.It is expected to provide a reference for the in-situ efficient and green synthesis of RE zeolite.展开更多
Aiming at the problems of lagging curriculum,weak practice,and single evaluation in the cultivation of HarmonyOS Development talents,this study constructs a“teacher-machine-student”ternary interactive teaching model...Aiming at the problems of lagging curriculum,weak practice,and single evaluation in the cultivation of HarmonyOS Development talents,this study constructs a“teacher-machine-student”ternary interactive teaching model based on the Congyou platform.Through the building block curriculum system,the HarmonyOS technology stack is decoupled into dynamic capability units,and a multi-disciplinary cross-case library is jointly built with Huawei,which significantly improves the synchronization of teaching content and industrial technology.This paper innovatively designs an AI collaborative teaching system,which employs knowledge graphs to plan learning paths,utilizes virtual equipment clusters to simulate development environments,and establishes a“diagnosis-feedback-enhancement”closed loop through AI-based review,thereby effectively improving students’development efficiency and code reuse rate.A three-dimensional evaluation model integrating task outcomes,process performance,and innovation is constructed,incorporating indicators such as code standardization and an innovation index to strengthen the cultivation of engineering thinking and innovative ability.Furthermore,a data-driven support platform is built to generate student competency profiles,open up the“credit-competency-certification”pathway,promote the transformation of course achievements into contributions to the Huawei ecosystem,and significantly shorten the job adaptation cycle for graduates.The research results provide a replicable paradigm for the cultivation of domestic operating system talents.展开更多
Given the growing importance of social media in digital rural development, this study systematically investigated the influence pathways of social media use among rural women in China, drawing on the Technology Accept...Given the growing importance of social media in digital rural development, this study systematically investigated the influence pathways of social media use among rural women in China, drawing on the Technology Acceptance Model(TAM). Employing quantitative research methods, the study conducted empirical tests based on 367 valid questionnaires using Partial Least Squares Structural Equation Modeling(PLS-SEM) via SmartPLS 4.0 software. Results indicate that significant associations exist between perceived ease of use, perceived usefulness, attitudes toward use, behavioral intention, and actual usage behavior. Specifically, the study finds that rural women's perceived ease of use of social media has a significant and positive influence on both perceived usefulness and attitudes toward use. Perceived usefulness further significantly promotes attitudes toward use and behavioral intention. Moreover, positive attitudes toward usage and strong behavioral intentions were effectively converted into actual social media usage behaviors. This study not only validates the applicability and explanatory power of the TAM model in understanding the digital behavior of Chinese rural women but also provides quantitative evidence for how social media enhances their “digital visibility.” These findings offer practical insights for governments and platform providers to optimize user experiences and strengthen digital skills training. Despite its limitations, including a cross-sectional design and a regional sample, this research holds significant theoretical and practical implications.展开更多
Aims&Scope Grain&Oil Science and Technology(GOST),quarterly,is a peer-reviewed Open Access(OA)journal with distinctive features in the field of grain and oil food research.Upon acceptance all articles are perm...Aims&Scope Grain&Oil Science and Technology(GOST),quarterly,is a peer-reviewed Open Access(OA)journal with distinctive features in the field of grain and oil food research.Upon acceptance all articles are permanently and freely available on ScienceDirect.GOST publishes original research papers and relevant review articles focusing on grain and oil food science and technology.The journal primarily covers new achievements,advanced technologies,and research progress in key areas such as grain and oil food engineering,food science,and food safety.It is dedicated to building an international academic exchange platform for grain and oil food science and technology that spans the entire chain from post-harvest grain handling to food consumption.展开更多
Background:With the rapid development of modern emerging technologies,the ethical dilemmas and social controversies triggered by scientific and technological activities have become increasingly prominent.How to guide ...Background:With the rapid development of modern emerging technologies,the ethical dilemmas and social controversies triggered by scientific and technological activities have become increasingly prominent.How to guide technology for good and prevent and control technological risks has become an important issue of global concern.Research on science and technology ethics is dedicated to integrating ethical theories into governance practices and constructing ethical models that adapt to the development of the times.Methods:This article systematically reviews the six core approaches of scientific and technological ethics thought,including technological autonomy and political philosophy criticism,responsibility ethics and intergenerational obligations,technological intermediation and the integration of life and the world,ethical principles and normative frameworks,participatory governance and ethical practice innovation,as well as domain-specific ethical norms,thereby constructing an ethical analysis framework applicable to medical technology risks.And cross-analysis was conducted by taking medical events such as gene editing and xenotransplantation as examples.Results:Research shows that a single ethical approach has limitations in addressing complex medical ethical challenges,while the six approaches are complementary and synergistic.By criticizing technological autonomy,establishing a responsibility ethics orientation,setting the bottom line of ethical principles,promoting participatory governance,formulating domain norms,and continuously reflecting on the intermediary nature of technology,a multi-level and dynamically adaptive governance system for scientific and technological ethics can be constructed.Conclusion:The key to addressing contemporary medical ethics challenges lies in the comprehensive application of science and technology ethics theories and the integration of ethical considerations throughout the entire process of scientific and technological research and development.In the future,a governance framework that adapts to the development of new technologies should be established to promote cross-cultural and cross-disciplinary ethical dialogue and public participation,ensuring that scientific and technological innovation always serves the dignity of human life and overall well-being.展开更多
Detecting biomarkers in body fluids by optical lateral flow immune assay(LFIA) technology provides rapid access to disease information for early diagnosis.LFIA is based on an antigen-antibody reaction and is rapidly b...Detecting biomarkers in body fluids by optical lateral flow immune assay(LFIA) technology provides rapid access to disease information for early diagnosis.LFIA is based on an antigen-antibody reaction and is rapidly becoming the preferred choice of physicians and patients for point-of-care testing due to its simplicity,cost-effectiveness,and rapid detection.Observing the optical signal change from the colloidal gold of the traditional LFIA strip has been widely applied for various biomarkers detection in body fluids.Despite the significant progress,rapid real-time detection of color changes in the colloidal gold by the naked eye still faces many limitations,such as large errors and the inability to quantify and accurately detect.New optical LFIA strip technology has emerged in recent years to extend its application scenarios for achieving quantitative detection such as fluorescence,afterglow,and chemiluminescence.Herein,we summarized the development of optical LFIA technology from single to hyphenated optical signals for biomarkers detection in body fluids from invasive and non-invasive sources.Moreover,the challenge and outlook of optical LFIA strip technology are highlighted to inspire the designing of next-generation diagnostic platforms.展开更多
Whole Slide Imaging (WSI) technology, as a revolutionary digital technology in the field of pathology, is gradually changing the traditional clinical pathological diagnosis model. By converting traditional glass patho...Whole Slide Imaging (WSI) technology, as a revolutionary digital technology in the field of pathology, is gradually changing the traditional clinical pathological diagnosis model. By converting traditional glass pathological sections into complete digital images through high-resolution scanning, it provides a new method for pathological diagnosis. Based on this, this paper studies the application of WSI technology in clinical pathological diagnosis, elaborates on its application value, analyzes the current application status, and proposes corresponding application countermeasures, aiming to provide reference for the standardized and popularized development of this technology in clinical pathological diagnosis.展开更多
Defence Technology(ISSN 2214-9147(O);2096-3459(P)),sponsored by China Ordnance Society,is published monthly and aims to become one of the well-known comprehensive journals in the world,which reports on the breakthroug...Defence Technology(ISSN 2214-9147(O);2096-3459(P)),sponsored by China Ordnance Society,is published monthly and aims to become one of the well-known comprehensive journals in the world,which reports on the breakthroughs in defence technology by building up an international academic exchange platform for the defence technology related research.It publishes original research papers having direct bearing on defence,with a balanced coverage on analytical,experimental,numerical simulation and applied investigations.It covers various disciplines of science,technology and engineering.展开更多
The Sn−2Al filler metal was utilized to bond W90 tungsten heavy alloys by the ultrasonic-assisted coating technology in atmospheric environment at 250℃.The effects of ultrasonic power and ultrasonic time on microstru...The Sn−2Al filler metal was utilized to bond W90 tungsten heavy alloys by the ultrasonic-assisted coating technology in atmospheric environment at 250℃.The effects of ultrasonic power and ultrasonic time on microstructure and interfacial strength of Sn−2Al/W90 interface were investigated.The ultrasound improved the wettability of Sn−2Al filler metal on W90 surface.As the ultrasonic power increased and ultrasonic time increased,the size of Al phase in seam decreased.The maximum value of Sn−2Al/W90 interfacial strength reached 30.1 MPa.Based on the acoustic pressure simulation and bubble dynamics,the intensity of cavitation effect was proportional to ultrasonic power.The generated high temperature and high pressure by cavitation effect reached 83799.6 K and 1.26×10^(14) Pa,respectively.展开更多
BACKGROUND Recently,medical three-dimensional printing technology(3DPT)has demonstrated potential benefits for the treatment of cubitus varus deformity(CVD)by improving accuracy of the osteotomy through the use of an ...BACKGROUND Recently,medical three-dimensional printing technology(3DPT)has demonstrated potential benefits for the treatment of cubitus varus deformity(CVD)by improving accuracy of the osteotomy through the use of an osteotomy guide,with or without a patient-mated plate.Here,we present an interesting CVD case,involving a patient who was treated with corrective biplanar chevron osteotomy using an innovative customized osteotomy guide and a newly designed patient-matched monoblock crosslink plate created with 3DPT.CASE SUMMARY A 32-year-old female presented with a significant CVD from childhood injury.A computer simulation was processed using images from computerized tomography scans of both upper extremities.The biplanar chevron osteotomy was designed to create identical anatomy between the mirror image of the contralateral distal humerus and the osteotomized distal humerus.Next,the customized osteotomy guide and patient-matched monoblock crosslink plate were designed and printed.A simulation osteotomy was created for the real-sized bone model,and the operation was performed using the posterior paratricipital approach with k-wire positioning from the customized osteotomy guide as a predrilled hole for screw fixation to achieve immediate control of the reduction after osteotomy.Our method allowed for successful treatment of the CVD case,significantly improving the patient’s radiographic and clinical outcomes,with satisfactory result.CONCLUSION 3DPT-created patient-matched osteotomy guide and instrumentation provides accurate control during CVD correction.展开更多
The feasibility of three-dimensional (3D) printing technology cgmbined with minimally invasive surgery in the treatment of pubic rami fractures was explored.From August 2015 to October 2017,a series of 30 patients who...The feasibility of three-dimensional (3D) printing technology cgmbined with minimally invasive surgery in the treatment of pubic rami fractures was explored.From August 2015 to October 2017,a series of 30 patients who underwent surgical stabilization of their anterior pelvic ring (all utilizing the 3D printing technology)by one surgeon at a single hospital were studied.The minimally invasive incisions were made through anterior inferior cilia spine and pubic nodule.Data collected included the operative duration,the blood loss,the damage of the important tissue,the biographic union and therecovery of the function after the operation.Measurements on inlet and outlet pelvic cardiograph were made immediately post-operation and at all follow-up clinic visits.The scores of reduction and function were measured during follow-up.Results showed that the wounds of 30 patients were healed in the first stage,and there was no injury of important structures such as blood vessels and nerves.According to the Matta criteria,excellent effectiveness was obtained in 22 cases and good in 8 cases.According to the functional evaluation criteria of Majeed,excellent effectiveness was obtained in 21 cases and good in 9 cases.It was suggested that the 3D printing technology assisted by minimally invasive surgery can better evaluate the pelvic fracture before operation,which was helpful in plate modeling, and can shorten surgery duration and reduce intraoperative blood loss and complications. The positioning accuracy was improved,and better surgical result was finally achieved.展开更多
BACKGROUND Three-dimensional(3D)modelling technology translates the patient-specific anatomical information derived from two-dimensional radiological images into virtual or physical 3D models,which more closely resemb...BACKGROUND Three-dimensional(3D)modelling technology translates the patient-specific anatomical information derived from two-dimensional radiological images into virtual or physical 3D models,which more closely resemble the complex environment encountered during surgery.It has been successfully applied to surgical planning and navigation,as well as surgical training and patient education in several surgical specialties,but its uptake lags behind in colorectal surgery.Rectal cancer surgery poses specific challenges due to the complex anatomy of the pelvis,which is difficult to comprehend and visualise.AIM To review the current and emerging applications of the 3D models,both virtual and physical,in rectal cancer surgery。METHODS Medline/PubMed,Embase and Scopus databases were searched using the keywords“rectal surgery”,“colorectal surgery”,“three-dimensional”,“3D”,“modelling”,“3D printing”,“surgical planning”,“surgical navigation”,“surgical education”,“patient education”to identify the eligible full-text studies published in English between 2001 and 2020.Reference list from each article was manually reviewed to identify additional relevant papers.The conference abstracts,animal and cadaveric studies and studies describing 3D pelvimetry or radiotherapy planning were excluded.Data were extracted from the retrieved manuscripts and summarised in a descriptive way.The manuscript was prepared and revised in accordance with PRISMA 2009 checklist.RESULTS Sixteen studies,including 9 feasibility studies,were included in the systematic review.The studies were classified into four categories:feasibility of the use of 3D modelling technology in rectal cancer surgery,preoperative planning and intraoperative navigation,surgical education and surgical device design.Thirteen studies used virtual models,one 3D printed model and 2 both types of models.The construction of virtual and physical models depicting the normal pelvic anatomy and rectal cancer,was shown to be feasible.Within the clinical context,3D models were used to identify vascular anomalies,for surgical planning and navigation in lateral pelvic wall lymph node dissection and in management of recurrent rectal cancer.Both physical and virtual 3D models were found to be valuable in surgical education,with a preference for 3D printed models.The main limitations of the current technology identified in the studies were related to the restrictions of the segmentation process and the lack of 3D printing materials that could mimic the soft and deformable tissues.CONCLUSION 3D modelling technology has potential to be utilised in multiple aspects of rectal cancer surgery,however,it is still at the experimental stage of application in this setting.展开更多
BACKGROUND Biliary stone disease is a highly prevalent condition and a leading cause of hospitalization worldwide.Hepatolithiasis with associated strictures has high residual and recurrence rates after traditional mul...BACKGROUND Biliary stone disease is a highly prevalent condition and a leading cause of hospitalization worldwide.Hepatolithiasis with associated strictures has high residual and recurrence rates after traditional multisession percutaneous transhepatic cholangioscopic lithotripsy(PTCSL).AIM To study one-step PTCSL using the percutaneous transhepatic one-step biliary fistulation(PTOBF)technique guided by three-dimensional(3D)visualization.METHODS This was a retrospective,single-center study analyzing,140 patients who,between October 2016 and October 2023,underwent one-step PTCSL for hepatolithiasis.The patients were divided into two groups:The 3D-PTOBF group and the PTOBF group.Stone clearance on choledochoscopy,complications,and long-term clearance and recurrence rates were assessed.RESULTS Age,total bilirubin,direct bilirubin,Child-Pugh class,and stone location were similar between the 2 groups,but there was a significant difference in bile duct strictures,with biliary strictures more common in the 3D-PTOBF group(P=0.001).The median follow-up time was 55.0(55.0,512.0)days.The immediate stone clearance ratio(88.6%vs 27.1%,P=0.000)and stricture resolution ratio(97.1%vs 78.6%,P=0.001)in the 3D-PTOBF group were significantly greater than those in the PTOBF group.Postoperative complication(8.6%vs 41.4%,P=0.000)and stone recurrence rates(7.1%vs 38.6%,P=0.000)were significantly lower in the 3D-PTOBF group.CONCLUSION Three-dimensional visualization helps make one-step PTCSL a safe,effective,and promising treatment for patients with complicated primary hepatolithiasis.The perioperative and long-term outcomes are satisfactory for patients with complicated primary hepatolithiasis.This minimally invasive method has the potential to be used as a substitute for hepatobiliary surgery.展开更多
In the Jiaoshiba block of the Fuling shale gas field,the employed reserves and recovery factor by primary well pattern are low,no obvious barrier is found in the development layer series,and layered development is dif...In the Jiaoshiba block of the Fuling shale gas field,the employed reserves and recovery factor by primary well pattern are low,no obvious barrier is found in the development layer series,and layered development is difficult.Based on the understanding of the main factors controlling shale gas enrichment and high production,the theory and technology of shale gas three-dimensional development,such as fine description and modeling of shale gas reservoir,optimization of three-dimensional development strategy,highly efficient drilling with dense well pattern,precision fracturing and real-time control,are discussed.Three-dimensional development refers to the application of optimal and fast drilling and volume fracturing technologies,depending upon the sedimentary characteristics,reservoir characteristics and sweet spot distribution of shale gas,to form"artificial gas reservoir"in a multidimensional space,so as to maximize the employed reserves,recovery factor and yield rate of shale gas development.In the research on shale gas three-dimensional development,the geological+engineering sweet spot description is fundamental,the collaborative optimization of natural fractures and artificial fractures is critical,and the improvement of speed and efficiency in drilling and fracturing engineering is the guarantee.Through the implementation of three-dimensional development,the overall recovery factor in the Jiaoshiba block has increased from 12.6%to 23.3%,providing an important support for the continuous and stable production of the Fuling shale gas field.展开更多
基金Supported by the Natural Science Foundation of Fujian Province,No.2022J011442.
文摘BACKGROUND Percutaneous transhepatic biliary drainage(PTBD)is one of the primary clinical treatment options for patients with obstructive jaundice.In recent years,PTBD assisted by three-dimensional(3D)reconstruction technology has been widely implemented,but its advantages over traditional methods remains inconclusive.Thus,a discussion is warranted.AIM To explore the safety and efficacy of 3D reconstruction technology-assisted PTBD.METHODS We systematically searched the databases including the Cochrane Library,PubMed,EMBASE,Web of Science and China National Knowledge Infrastructure.The search period extended from the establishment of each database to November,2024.We screened the literature according to predefined inclusion and exclusion criteria,assessed the quality of the studies,and extracted data.Meta-analysis was performed using Revman 5.4.1 software.RESULTS A total of 15 studies were included,involving 1434 patients.The results of the meta-analysis showed that compared with the traditional group,the overall post-operative complications rate in the 3D reconstruction technology group was significantly lower[odds ratio=0.25;95%confidence interval(CI):0.17-0.36,P<0.00001].The overall puncture success rate in the 3D reconstruction group was better than those in the traditional group(odds ratio=3.61;95%CI:1.98-6.55,P<0.0001).However,there was no significant difference between the two groups in the reduction levels of postoperative total bilirubin(mean difference=-1.38;95%CI:-3.29 to 0.53,P=0.16).Subgroup analysis were conducted on the surgery time according to guidance stages of the 3D reconstruction,3D reconstruction imaging modalities,and types of studies.The results were stable,with no significant changes observed.CONCLUSION 3D reconstruction technology significantly improves the puncture success rate and safety of PTBD.However,it has no significant advantage in bile drainage effectiveness.Continued research is warranted to further explore its clinical value and optimize its application.
文摘The core sampling experiments were conducted after hydraulic fracturing in the three-dimensional development zone of Fuling shale gas.Six coring wells of different well types were systematically designed.Based on the integrated engineering technology of post-fracturing drilling,coring and monitoring of shale and the analysis of fracture source tracing,the evaluation of the fracture network after fracturing in the three-dimensional development of shale gas was conducted.The data of core fractures after fracturing indicate that three major types of fractures are formed after fracturing:natural fractures,hydraulic fractures,and fractures induced by external mechanical force,which are further classified into six subcategories:natural structural fractures,natural bedding fractures,hydraulic fractures,hydraulically activated fractures,drilling induced fractures,and fractures induced by core transportation.The forms of the artificial fracture network after fracturing are complex.Hydraulic fractures and hydraulically activated fractures interweave with each other,presenting eight forms of artificial fracture networks,among which the“一”-shaped fracture is the most common,accounting for approximately 70%of the total fractures.When the distance to the fractured wellbore is less than 35 m,the density of the artificial fracture network is relatively high;when it is 35–100 m,the density is lower;and when it is beyond 100 m,the density gradually increases.The results of the fracture tracing in the core sampling area confirm that the current fracturing technology can essentially achieve the differential transformation of the reservoir in the main area of Jiaoshiba block in Fuling.The three-layer three-dimensional development model can efficiently utilize shale gas reserves,although there is still room for improvement in the complexity and propagation uniformity of fractures.It is necessary to further optimize technologies such as close-cutting combined with temporary blocking and deflection within fractures or at fracture mouths,as well as limited flow perforation techniques,to promote the balanced initiation and extension of fractures.
文摘With the accelerating aging process of China’s population,the demand for community elderly care services has shown diversified and personalized characteristics.However,problems such as insufficient total care service resources,uneven distribution,and prominent supply-demand contradictions have seriously affected service quality.Big data technology,with core advantages including data collection,analysis and mining,and accurate prediction,provides a new solution for the allocation of community elderly care service resources.This paper systematically studies the application value of big data technology in the allocation of community elderly care service resources from three aspects:resource allocation efficiency,service accuracy,and management intelligence.Combined with practical needs,it proposes optimal allocation strategies such as building a big data analysis platform and accurately grasping the elderly’s care needs,striving to provide operable path references for the construction of community elderly care service systems,promoting the early realization of the elderly care service goal of“adequate support and proper care for the elderly”,and boosting the high-quality development of China’s elderly care service industry.
基金support of the National Natural Science Foundation of China(No.12172023)。
文摘According to the Mindlin plate theory and the first-order piston theory,this work obtains accurate closed-form eigensolutions for the flutter problem of three-dimensional(3D)rectangular laminated panels.The governing differential equations are derived by the Hamilton's variational principle,and then solved by the iterative Separation-of-Variable(i SOV)method,which are applicable to arbitrary combinations of homogeneous Boundary Conditions(BCs).However,only the simply-support,clamped and cantilever panels are considered in this work for the sake of clarity.With the closed-form eigensolutions,the flutter frequency,flutter mode and flutter boundary are presented,and the effect of shear deformation and aerodynamic damping on flutter frequencies is investigated.Besides,the relation between panel energy and the work of aerodynamic load is discussed.The numerical comparisons reveal the following.(A)The flutter eigenvalues obtained by the present method are accurate,validated by the Finite Element Method(FEM)and the Galerkin method.(B)When the span-chord ratio is larger than 3,simplifying a 3D panel to 2D(two-dimensional)panel is reasonable and the relative differences of the flutter points predicted by the two models are less than one percent.(C)The reciprocal relationship between the mechanical energy of the panel and the work done by aerodynamic load is verified by using the present flutter eigenvalues and modes,further indicating the high accuracy of the present solutions.(D)The coupling of shear deformation and aerodynamic damping prevents frequency coalescing.
文摘In response to the Ministry of Education’s requirements for building distinctive model software schools,Software College of Northeastern University and Shenzhen Kingdom Technology Co.,Ltd.jointly developed the specialized course“Application and Practice of RPA Technology in FinTech”.Addressing pain points in financial digital transformation,the course integrates robotic process automation(RPA)principles,financial domain knowledge,and RPA platform practice into a“technology-scenario-capability”trinity teaching system.Through 64 credit hours of integrated theory and practice,it covers RPA fundamentals,financial applications,RPA operations(including core skills like Web/desktop automation),and AI integration,cultivating students’ability to design and implement automated financial workflows.It innovatively features a RPA simulation platform,30+financial case studies,and modular task resources,creating a“teacher-machine-student”interactive model.Practice demonstrates the course effectively enhances students’integration of technical application and business acumen,providing a scalable paradigm for cultivating interdisciplinary FinTech talent.
文摘The moment a media delegation from the Republic of the Congo arrived at the Othello Kitchenware Museum on 18 November 2025,they were greeted with a vivid show of Guangdong’s industrial strength.Standing before them was not a typical exhibition hall,but a building shaped like a gleaming stainless-steel cooking pot.
基金supported by the NationalKey Research and Development Program of China(2023YFA1507701)National Natural Science Foundation of China(U22B6011,22288102)“Announcement and Challenge”Science and Technology Project of Xinjiang Uygur Autonomous Region(XJKJTJBGS-2023).
文摘Rare earth(RE)Y-type zeolite was synthesized in situ by acidic co-hydrolysis route and hydrothermal method.The key process parameters were optimized based on the RE utilization rate.The effect of inducing a rotating packed bed(RPB)in premixing and crystallization on crystallinity and RE utilization rate was further investigated.The results indicate that lanthanide(La)cations are successfully introduced into the sodalite cage of Y-type zeolite.The optimized conditions are that the molar ratio of Si/La is 150,premixing for 5 h,crystallization at 90℃ for 18 h,and calcination at 550℃ for 3.5 h.At this stage,the RE utilization rate reaches 74.5%.Compared with the conventional stirred tank reactor(STR),RPB can effectively shorten the premixing time and crystallization time by 4.3 h and 6 h,improve the crystallinity by 23%and RE utilization rate by 7.5%.The RE utilization rate is more than 80%by RPB,surpassing the effectiveness of using the one-exchange one-calcination process in the traditional liquid ion exchange process.It is expected to provide a reference for the in-situ efficient and green synthesis of RE zeolite.
文摘Aiming at the problems of lagging curriculum,weak practice,and single evaluation in the cultivation of HarmonyOS Development talents,this study constructs a“teacher-machine-student”ternary interactive teaching model based on the Congyou platform.Through the building block curriculum system,the HarmonyOS technology stack is decoupled into dynamic capability units,and a multi-disciplinary cross-case library is jointly built with Huawei,which significantly improves the synchronization of teaching content and industrial technology.This paper innovatively designs an AI collaborative teaching system,which employs knowledge graphs to plan learning paths,utilizes virtual equipment clusters to simulate development environments,and establishes a“diagnosis-feedback-enhancement”closed loop through AI-based review,thereby effectively improving students’development efficiency and code reuse rate.A three-dimensional evaluation model integrating task outcomes,process performance,and innovation is constructed,incorporating indicators such as code standardization and an innovation index to strengthen the cultivation of engineering thinking and innovative ability.Furthermore,a data-driven support platform is built to generate student competency profiles,open up the“credit-competency-certification”pathway,promote the transformation of course achievements into contributions to the Huawei ecosystem,and significantly shorten the job adaptation cycle for graduates.The research results provide a replicable paradigm for the cultivation of domestic operating system talents.
文摘Given the growing importance of social media in digital rural development, this study systematically investigated the influence pathways of social media use among rural women in China, drawing on the Technology Acceptance Model(TAM). Employing quantitative research methods, the study conducted empirical tests based on 367 valid questionnaires using Partial Least Squares Structural Equation Modeling(PLS-SEM) via SmartPLS 4.0 software. Results indicate that significant associations exist between perceived ease of use, perceived usefulness, attitudes toward use, behavioral intention, and actual usage behavior. Specifically, the study finds that rural women's perceived ease of use of social media has a significant and positive influence on both perceived usefulness and attitudes toward use. Perceived usefulness further significantly promotes attitudes toward use and behavioral intention. Moreover, positive attitudes toward usage and strong behavioral intentions were effectively converted into actual social media usage behaviors. This study not only validates the applicability and explanatory power of the TAM model in understanding the digital behavior of Chinese rural women but also provides quantitative evidence for how social media enhances their “digital visibility.” These findings offer practical insights for governments and platform providers to optimize user experiences and strengthen digital skills training. Despite its limitations, including a cross-sectional design and a regional sample, this research holds significant theoretical and practical implications.
文摘Aims&Scope Grain&Oil Science and Technology(GOST),quarterly,is a peer-reviewed Open Access(OA)journal with distinctive features in the field of grain and oil food research.Upon acceptance all articles are permanently and freely available on ScienceDirect.GOST publishes original research papers and relevant review articles focusing on grain and oil food science and technology.The journal primarily covers new achievements,advanced technologies,and research progress in key areas such as grain and oil food engineering,food science,and food safety.It is dedicated to building an international academic exchange platform for grain and oil food science and technology that spans the entire chain from post-harvest grain handling to food consumption.
基金supported by the National Key Research and Development Program(Grant No.2024YFA0917200)the Projects of the Chinese Center for Disease Control and Prevention(Grant No.BB2110240093)World Medical History under the Education Innovation Plan of the University of Science and Technology of China(Grant No.2024YCHX07).
文摘Background:With the rapid development of modern emerging technologies,the ethical dilemmas and social controversies triggered by scientific and technological activities have become increasingly prominent.How to guide technology for good and prevent and control technological risks has become an important issue of global concern.Research on science and technology ethics is dedicated to integrating ethical theories into governance practices and constructing ethical models that adapt to the development of the times.Methods:This article systematically reviews the six core approaches of scientific and technological ethics thought,including technological autonomy and political philosophy criticism,responsibility ethics and intergenerational obligations,technological intermediation and the integration of life and the world,ethical principles and normative frameworks,participatory governance and ethical practice innovation,as well as domain-specific ethical norms,thereby constructing an ethical analysis framework applicable to medical technology risks.And cross-analysis was conducted by taking medical events such as gene editing and xenotransplantation as examples.Results:Research shows that a single ethical approach has limitations in addressing complex medical ethical challenges,while the six approaches are complementary and synergistic.By criticizing technological autonomy,establishing a responsibility ethics orientation,setting the bottom line of ethical principles,promoting participatory governance,formulating domain norms,and continuously reflecting on the intermediary nature of technology,a multi-level and dynamically adaptive governance system for scientific and technological ethics can be constructed.Conclusion:The key to addressing contemporary medical ethics challenges lies in the comprehensive application of science and technology ethics theories and the integration of ethical considerations throughout the entire process of scientific and technological research and development.In the future,a governance framework that adapts to the development of new technologies should be established to promote cross-cultural and cross-disciplinary ethical dialogue and public participation,ensuring that scientific and technological innovation always serves the dignity of human life and overall well-being.
基金supported by the National Natural Science Foundation of China (Nos.22234005,22494632,22404081)the Natural Science Foundation of Jiangsu Province (Nos.BK20222015,BK20240534)。
文摘Detecting biomarkers in body fluids by optical lateral flow immune assay(LFIA) technology provides rapid access to disease information for early diagnosis.LFIA is based on an antigen-antibody reaction and is rapidly becoming the preferred choice of physicians and patients for point-of-care testing due to its simplicity,cost-effectiveness,and rapid detection.Observing the optical signal change from the colloidal gold of the traditional LFIA strip has been widely applied for various biomarkers detection in body fluids.Despite the significant progress,rapid real-time detection of color changes in the colloidal gold by the naked eye still faces many limitations,such as large errors and the inability to quantify and accurately detect.New optical LFIA strip technology has emerged in recent years to extend its application scenarios for achieving quantitative detection such as fluorescence,afterglow,and chemiluminescence.Herein,we summarized the development of optical LFIA technology from single to hyphenated optical signals for biomarkers detection in body fluids from invasive and non-invasive sources.Moreover,the challenge and outlook of optical LFIA strip technology are highlighted to inspire the designing of next-generation diagnostic platforms.
文摘Whole Slide Imaging (WSI) technology, as a revolutionary digital technology in the field of pathology, is gradually changing the traditional clinical pathological diagnosis model. By converting traditional glass pathological sections into complete digital images through high-resolution scanning, it provides a new method for pathological diagnosis. Based on this, this paper studies the application of WSI technology in clinical pathological diagnosis, elaborates on its application value, analyzes the current application status, and proposes corresponding application countermeasures, aiming to provide reference for the standardized and popularized development of this technology in clinical pathological diagnosis.
文摘Defence Technology(ISSN 2214-9147(O);2096-3459(P)),sponsored by China Ordnance Society,is published monthly and aims to become one of the well-known comprehensive journals in the world,which reports on the breakthroughs in defence technology by building up an international academic exchange platform for the defence technology related research.It publishes original research papers having direct bearing on defence,with a balanced coverage on analytical,experimental,numerical simulation and applied investigations.It covers various disciplines of science,technology and engineering.
基金supported by the National Natural Science Foundation of China(Nos.52105330,52175307)the Natural Science Foundation of Shandong Province,China(No.ZR2023JQ021)。
文摘The Sn−2Al filler metal was utilized to bond W90 tungsten heavy alloys by the ultrasonic-assisted coating technology in atmospheric environment at 250℃.The effects of ultrasonic power and ultrasonic time on microstructure and interfacial strength of Sn−2Al/W90 interface were investigated.The ultrasound improved the wettability of Sn−2Al filler metal on W90 surface.As the ultrasonic power increased and ultrasonic time increased,the size of Al phase in seam decreased.The maximum value of Sn−2Al/W90 interfacial strength reached 30.1 MPa.Based on the acoustic pressure simulation and bubble dynamics,the intensity of cavitation effect was proportional to ultrasonic power.The generated high temperature and high pressure by cavitation effect reached 83799.6 K and 1.26×10^(14) Pa,respectively.
文摘BACKGROUND Recently,medical three-dimensional printing technology(3DPT)has demonstrated potential benefits for the treatment of cubitus varus deformity(CVD)by improving accuracy of the osteotomy through the use of an osteotomy guide,with or without a patient-mated plate.Here,we present an interesting CVD case,involving a patient who was treated with corrective biplanar chevron osteotomy using an innovative customized osteotomy guide and a newly designed patient-matched monoblock crosslink plate created with 3DPT.CASE SUMMARY A 32-year-old female presented with a significant CVD from childhood injury.A computer simulation was processed using images from computerized tomography scans of both upper extremities.The biplanar chevron osteotomy was designed to create identical anatomy between the mirror image of the contralateral distal humerus and the osteotomized distal humerus.Next,the customized osteotomy guide and patient-matched monoblock crosslink plate were designed and printed.A simulation osteotomy was created for the real-sized bone model,and the operation was performed using the posterior paratricipital approach with k-wire positioning from the customized osteotomy guide as a predrilled hole for screw fixation to achieve immediate control of the reduction after osteotomy.Our method allowed for successful treatment of the CVD case,significantly improving the patient’s radiographic and clinical outcomes,with satisfactory result.CONCLUSION 3DPT-created patient-matched osteotomy guide and instrumentation provides accurate control during CVD correction.
文摘The feasibility of three-dimensional (3D) printing technology cgmbined with minimally invasive surgery in the treatment of pubic rami fractures was explored.From August 2015 to October 2017,a series of 30 patients who underwent surgical stabilization of their anterior pelvic ring (all utilizing the 3D printing technology)by one surgeon at a single hospital were studied.The minimally invasive incisions were made through anterior inferior cilia spine and pubic nodule.Data collected included the operative duration,the blood loss,the damage of the important tissue,the biographic union and therecovery of the function after the operation.Measurements on inlet and outlet pelvic cardiograph were made immediately post-operation and at all follow-up clinic visits.The scores of reduction and function were measured during follow-up.Results showed that the wounds of 30 patients were healed in the first stage,and there was no injury of important structures such as blood vessels and nerves.According to the Matta criteria,excellent effectiveness was obtained in 22 cases and good in 8 cases.According to the functional evaluation criteria of Majeed,excellent effectiveness was obtained in 21 cases and good in 9 cases.It was suggested that the 3D printing technology assisted by minimally invasive surgery can better evaluate the pelvic fracture before operation,which was helpful in plate modeling, and can shorten surgery duration and reduce intraoperative blood loss and complications. The positioning accuracy was improved,and better surgical result was finally achieved.
文摘BACKGROUND Three-dimensional(3D)modelling technology translates the patient-specific anatomical information derived from two-dimensional radiological images into virtual or physical 3D models,which more closely resemble the complex environment encountered during surgery.It has been successfully applied to surgical planning and navigation,as well as surgical training and patient education in several surgical specialties,but its uptake lags behind in colorectal surgery.Rectal cancer surgery poses specific challenges due to the complex anatomy of the pelvis,which is difficult to comprehend and visualise.AIM To review the current and emerging applications of the 3D models,both virtual and physical,in rectal cancer surgery。METHODS Medline/PubMed,Embase and Scopus databases were searched using the keywords“rectal surgery”,“colorectal surgery”,“three-dimensional”,“3D”,“modelling”,“3D printing”,“surgical planning”,“surgical navigation”,“surgical education”,“patient education”to identify the eligible full-text studies published in English between 2001 and 2020.Reference list from each article was manually reviewed to identify additional relevant papers.The conference abstracts,animal and cadaveric studies and studies describing 3D pelvimetry or radiotherapy planning were excluded.Data were extracted from the retrieved manuscripts and summarised in a descriptive way.The manuscript was prepared and revised in accordance with PRISMA 2009 checklist.RESULTS Sixteen studies,including 9 feasibility studies,were included in the systematic review.The studies were classified into four categories:feasibility of the use of 3D modelling technology in rectal cancer surgery,preoperative planning and intraoperative navigation,surgical education and surgical device design.Thirteen studies used virtual models,one 3D printed model and 2 both types of models.The construction of virtual and physical models depicting the normal pelvic anatomy and rectal cancer,was shown to be feasible.Within the clinical context,3D models were used to identify vascular anomalies,for surgical planning and navigation in lateral pelvic wall lymph node dissection and in management of recurrent rectal cancer.Both physical and virtual 3D models were found to be valuable in surgical education,with a preference for 3D printed models.The main limitations of the current technology identified in the studies were related to the restrictions of the segmentation process and the lack of 3D printing materials that could mimic the soft and deformable tissues.CONCLUSION 3D modelling technology has potential to be utilised in multiple aspects of rectal cancer surgery,however,it is still at the experimental stage of application in this setting.
基金Supported by The Key Medical Specialty Nurturing Program of Foshan During The 14th Five-Year Plan Period,No.FSPY145205The Medical Research Project of Foshan Health Bureau,No.20230814A010024+1 种基金The Guangzhou Science and Technology Plan Project,No.202102010251the Guangdong Science and Technology Program,No.2017ZC0222.
文摘BACKGROUND Biliary stone disease is a highly prevalent condition and a leading cause of hospitalization worldwide.Hepatolithiasis with associated strictures has high residual and recurrence rates after traditional multisession percutaneous transhepatic cholangioscopic lithotripsy(PTCSL).AIM To study one-step PTCSL using the percutaneous transhepatic one-step biliary fistulation(PTOBF)technique guided by three-dimensional(3D)visualization.METHODS This was a retrospective,single-center study analyzing,140 patients who,between October 2016 and October 2023,underwent one-step PTCSL for hepatolithiasis.The patients were divided into two groups:The 3D-PTOBF group and the PTOBF group.Stone clearance on choledochoscopy,complications,and long-term clearance and recurrence rates were assessed.RESULTS Age,total bilirubin,direct bilirubin,Child-Pugh class,and stone location were similar between the 2 groups,but there was a significant difference in bile duct strictures,with biliary strictures more common in the 3D-PTOBF group(P=0.001).The median follow-up time was 55.0(55.0,512.0)days.The immediate stone clearance ratio(88.6%vs 27.1%,P=0.000)and stricture resolution ratio(97.1%vs 78.6%,P=0.001)in the 3D-PTOBF group were significantly greater than those in the PTOBF group.Postoperative complication(8.6%vs 41.4%,P=0.000)and stone recurrence rates(7.1%vs 38.6%,P=0.000)were significantly lower in the 3D-PTOBF group.CONCLUSION Three-dimensional visualization helps make one-step PTCSL a safe,effective,and promising treatment for patients with complicated primary hepatolithiasis.The perioperative and long-term outcomes are satisfactory for patients with complicated primary hepatolithiasis.This minimally invasive method has the potential to be used as a substitute for hepatobiliary surgery.
基金Supported by the Sinopec Science and Technology Project(P22183).
文摘In the Jiaoshiba block of the Fuling shale gas field,the employed reserves and recovery factor by primary well pattern are low,no obvious barrier is found in the development layer series,and layered development is difficult.Based on the understanding of the main factors controlling shale gas enrichment and high production,the theory and technology of shale gas three-dimensional development,such as fine description and modeling of shale gas reservoir,optimization of three-dimensional development strategy,highly efficient drilling with dense well pattern,precision fracturing and real-time control,are discussed.Three-dimensional development refers to the application of optimal and fast drilling and volume fracturing technologies,depending upon the sedimentary characteristics,reservoir characteristics and sweet spot distribution of shale gas,to form"artificial gas reservoir"in a multidimensional space,so as to maximize the employed reserves,recovery factor and yield rate of shale gas development.In the research on shale gas three-dimensional development,the geological+engineering sweet spot description is fundamental,the collaborative optimization of natural fractures and artificial fractures is critical,and the improvement of speed and efficiency in drilling and fracturing engineering is the guarantee.Through the implementation of three-dimensional development,the overall recovery factor in the Jiaoshiba block has increased from 12.6%to 23.3%,providing an important support for the continuous and stable production of the Fuling shale gas field.
