Objective The use of lasers has been an important part of urology in the treatment of stone and prostate disease.The thermal effects of lasers in lithotripsy have been a subject of debate over the years.The objective ...Objective The use of lasers has been an important part of urology in the treatment of stone and prostate disease.The thermal effects of lasers in lithotripsy have been a subject of debate over the years.The objective of this review was to assess the current state of knowledge available on the thermal effects of lasers in lithotripsy,as well as explore any new areas where studies are needed.Methods In August 2022,a keyword search on Google Scholar,PubMed,and Scopus for all papers containing the phrases“thermal effects”AND“laser”AND“lithotripsy”AND“urology”was done followed by citation jumping to other studies pertaining to the topic and 35 relevant papers were included in our study.The data from relevant papers were segregated into five groups according to the factor studied and type of study,and tables were created for a comparison of data.Results Temperature above the threshold of 43℃ was reached only when the power was>40 W and when there was adequate irrigation(at least 15–30 mL/min).Shorter lasing time divided by lithotripsy time or operator duty cycles less than 70%also resulted in a smaller temperature rise.Conclusion At least eight factors modify the thermal effects of lasers,and most importantly,the use of chilled irrigation at higher perfusion rates,lower power settings of<40 W,and with a shorter operator duty cycle will help to prevent thermal injuries from occurring.Stones impacted in the ureter or pelvi-ureteric junction further increase the probability of thermal injuries during laser firing.展开更多
During the propagation of high-power lasers within internal channels,the laser beam heats the propagation medium,causing the thermal blooming effect that degrades the beam quality at the output.The intricate configura...During the propagation of high-power lasers within internal channels,the laser beam heats the propagation medium,causing the thermal blooming effect that degrades the beam quality at the output.The intricate configuration of the optical path within the internal channel necessitates complex and time-consuming efforts to assess the impact of thermal blooming effect on the optical path.To meet the engineering need for rapid evaluation of thermal blooming effect in optical paths,this study proposed a rapid simulation method for the thermal blooming effect in internal optical paths based on the finite element method.This method discretized the fluid region into infinitesimal elements and employed finite element method for flow field analysis.A simplified analytical model of the flow field region in complex internal channels was established,and regions with similar thermal blooming effect were divided within this model.Based on the calculated optical path differences within these regions,numerical simulations of phase distortion caused by thermal blooming were conducted.The calculated result were compared with those obtained using the existing methods.The findings reveal that for complex optical paths,the discrepancy between the two approaches is less than 3.6%,with similar phase distortion patterns observed.For L-type units,this method and the existing methods identify the same primary factors influencing aberrations and exhibit consistent trends in their variation.This method was used to analyze the impact of thermal blooming effect in a straight channel under different gravity directions.The results show that phase distortion varies with changes in the direction of gravity,and the magnitude of the phase difference is strongly correlated with the component of gravity perpendicular to the optical axis.Compared to the existing methods,this approach offers greater flexibility,obviates the need for complex custom analysis programming.The analytical results of this method enable a rapid assessment of the thermal blooming effect in optical paths within the internal channel.This is especially useful during the engineering design.These results also provide crucial references for developing strategies to suppress thermal blooming effect.展开更多
A comprehensive numerical investigation into mixed⁃mode delamination is presented in this study.It aims to assess the impact of thermal and friction effects through mixed⁃mode flexure crack propagation testing.Finite ...A comprehensive numerical investigation into mixed⁃mode delamination is presented in this study.It aims to assess the impact of thermal and friction effects through mixed⁃mode flexure crack propagation testing.Finite element analysis was employed to model the delamination process,incorporating a contact cohesive zone model.This model couples the traction⁃separation law,the contact law,and the Coulomb friction law simultaneously.The thermomechanical analysis in this study is performed using a sequentially coupled approach,implemented with the finite element software ABAQUS.The findings underscore the importance of this study.展开更多
Twisted polymer artificial muscles activated by thermal heating represent a new class of soft actuators capable of generating torsional actuation.The thermal torsion effect,characterized by the reversible untwisting o...Twisted polymer artificial muscles activated by thermal heating represent a new class of soft actuators capable of generating torsional actuation.The thermal torsion effect,characterized by the reversible untwisting of twisted fibers as temperature increases due to greater radial than axial thermal expansion,is crucial to the actuation performance of these artificial muscles.This study explores the thermal torsion effect of polymer muscles made of twisted Nylon 6 fibers in experimental and theoretical aspects,focusing on the interplay between material properties and temperature.It is revealed that the thermal torsion effect enhances the actuation performance of the twisted polymer actuator while the thermal softening effect diminishes it.A thermal-mechanical model incorporating both the thermal torsion effect and thermal softening effect is used to predict the recovered torque of the twisted polymer actuators.An optimal bias angle and operating temperature are identified to maximize the recovered torque.Analysis of strain and stress distributions in the cross-section of the twisted polymer fiber shows that the outer layers of the fiber predominantly contribute to the torsional actuation.This work aids in the precise control and structural optimization of the thermally-activated twisted polymer actuators.展开更多
The stimulation of shale reservoirs frequently involves significant shear failure,which is crucial for creating fracture networks and enhancing permeability to boost production.As the depth of extraction increases,the...The stimulation of shale reservoirs frequently involves significant shear failure,which is crucial for creating fracture networks and enhancing permeability to boost production.As the depth of extraction increases,the impact of elevated temperatures on the anisotropic shear strength and failure mechanisms of shale becomes pronounced,yet there is a notable lack of relevant research.This study conducts,for the first time,direct shear experiment on shales at four different temperatures and seven bedding angles.By employing acoustic emission(AE)and digital image correlation(DIC)techniques,the evolution of damage and the mechanism of crack propagation under anisotropic direct shearing at varying temperatures is revealed.The results indicate that both shear displacement and strength of shale increase with temperature across different bedding angles.Additionally,shale demonstrates distinct brittle failure characteristics under various conditions during direct shearing tests.The types of anisotropic shear failure observed under the influence of temperature include central shearing fracture,central shearing with secondary fracture,and deflected slip along the bedding.Moreover,the temperature effect enhances shear-induced crack propagation along bedding planes.Shear failure in shale predominantly occurs during higher loading stages,which coincide with a substantial amount of AE signals.Finally,the introduction of the anisotropy index and temperature sensitivity coefficient further elucidates the interaction mechanism between thermal effects and anisotropy.This study offers a novel methodology to explore the anisotropic shear failure behavior of shale under elevated temperatures,and also provides crucial theoretical and experimental insights into shear failure behavior relevant to practical shale reservoir stimulation.展开更多
The thermal nanofluids have garnered widespread attention for their use in multiple thermal systems,including heating processes,sustainable energy,and nuclear reactions.Research on nanofluids has revealed that the the...The thermal nanofluids have garnered widespread attention for their use in multiple thermal systems,including heating processes,sustainable energy,and nuclear reactions.Research on nanofluids has revealed that the thermal efficiencies of such materials are adversely affected by various thermal features.The purpose of the current work is to demonstrate the thermal analysis of Jeffrey nanofluids with the suspension of microorganisms in the presence of variable thermal sources.The variable effects of thermal conductivity,Brownian diffusivity,and motile density are utilized.The investigated model also reveals the contributions of radiation phenomena and chemical reactions.A porous,saturated,moving surface with a suction phenomenon promotes flow.The modeling of the problem is based on the implementation of the Cattaneo-Christov approach.The convective thermal constraints are used to promote the heat transfer features.A simplified form of the governing model is treated with the assistance of a shooting technique.The physical effects of different parameters for the problem are presented.The current problem justifies its applications in heat transfer,coating processes,heat exchangers,cooling systems in microelectronics,solar systems,chemical processes,etc.展开更多
The exploitation of organic-inorganic hybrid perovskites(OIHPs) as active layer materials for typical sandwich-structured resistive memories has attracted widespread interest due to the property of low power consumpti...The exploitation of organic-inorganic hybrid perovskites(OIHPs) as active layer materials for typical sandwich-structured resistive memories has attracted widespread interest due to the property of low power consumption and fast switching. However, the inherent thermal instability of perovskites limits the application of OIHPs-based resistive memories under extreme conditions, while the infiuence of thermal effects on their resistance change characteristics remains unclear. Herein, a novel 2D <100>-oriented high-temperature resistant OIHP [(BIZ-H)_(2)(PbBr_(4))]n(BIZ = benzimidazole) is prepared as an active layer material to fabricate FTO/[(BIZ-H)_(2)(PbBr_(4))]n/Ag resistive memory with excellent thermal reproducibility and stability up to 120℃. The increase in temperature leads to a decrease in the PbBr_(6) octahedral distortion in the crystal structure, an increase in hydrogen bonding between the(BIZ-H)+cation and the(PbBr_(4))_(n)^(2n-)layer, and a shortening of the spacing of the inorganic layers, which is found to result in the creation and predominance of thermally activated traps with increasing temperature. This work provides a new direction for the next generation of OIHPs-based resistive memories with high-temperature tolerance.展开更多
Multi-resonance thermally ac-tivated delayed fluorescence(MR-TADF)emitters are one of the most excellent materi-als for high performance or-ganic light-emitting diodes(OLEDs)with high color puri-ty benefiting from the...Multi-resonance thermally ac-tivated delayed fluorescence(MR-TADF)emitters are one of the most excellent materi-als for high performance or-ganic light-emitting diodes(OLEDs)with high color puri-ty benefiting from their nar-row full width at half maxi-mum(FWHM)and great de-vice performance.However,small spin-orbit coupling(SOC)is one of drawbacks for MR-TADF emitters and introduction of heavy atoms may be one effective solution.In this work,four MR-TADF molecules with different atoms(O,S,Se)are carried out based on the first-principles calculation,and excited state dynamics in both toluene and solid phase is investi-gated.Our calculation results indicate that heavy atoms could induce smaller adiabatic ener-gy gap and larger SOC between the first singlet excited state and the first triplet excited state,which is advantageous for the conversion of singlet and triplet excitons,and thus the generation of thermally activated delayed fluorescence(TADF).Though the reorganization energy and full width at half maximum(FWHM)of emission are increased,the influence is quite limited.Besides,the fluorescent rates are also little influenced.Our calculation results indicate that heavy atom introduction is an efficient strategy to enhance the SOC values of MR-TADF emitters without influencing other properties significantly.展开更多
The monument thermal effect(MTE)displacements could result in periodical signals with several mil-limeters magnitudes in the vertical and horizontal GPS position time series.However,the interaction ofvarious origins o...The monument thermal effect(MTE)displacements could result in periodical signals with several mil-limeters magnitudes in the vertical and horizontal GPS position time series.However,the interaction ofvarious origins of periodic signals in GPS observations makes it difficult to isolate the millimeter-levelMTE displacement from other signals and noises.In this study,to assess the diurnal and semidiurnalsignals induced by MTE,we processed 12 very short GPS baselines(VSGB)with length<150 m.Themonument pairs for each baseline differ in their heights,horizontal structure,or base foundations.Meanwhile,two zero-baselines were also processed as the control group.Results showed that the sea-sonal signals observed in VSGB time series in the horizontal and vertical directions,were mainly inducedby seasonal MTE.Time-varying diurnal and semidiurnal signals with amplitude up to 4 mm wereobserved in the vertical direction for baselines with monument height difference(MHD)larger than10 m.Horizontal diurnal signal with an amplitude of about 2 mm was also detected for baselines withnon-axisymmetric monument structure.The orientation of the detected horizontal displacement wascoherent with the direction of daily temperature variation(DTV)driven by direct solar radiation,whichindicates that the diurnal and semidiurnal signals are likely induced by MTE.The observed high-frequency MTE displacements,if not well modeled and removed,may propagate into spurious long-term signals and bias the velocity estimation in the daily GPS time series.展开更多
As the size of transistors shrinks and power density increases,thermal simulation has become an indispensable part of the device design procedure.However,existing works for advanced technology transistors use simplifi...As the size of transistors shrinks and power density increases,thermal simulation has become an indispensable part of the device design procedure.However,existing works for advanced technology transistors use simplified empirical models to calculate effective thermal conductivity in the simulations.In this work,we present a dataset of size-dependent effective thermal conductivity with electron and phonon properties extracted from ab initio computations.Absolute in-plane and cross-plane thermal conductivity data of eight semiconducting materials(Si,Ge,GaN,AlN,4H-SiC,GaAs,InAs,BAs)and four metallic materials(Al,W,TiN,Ti)with the characteristic length ranging from 5 nm to 50 nm have been provided.Besides the absolute value,normalized effective thermal conductivity is also given,in case it needs to be used with updated bulk thermal conductivity in the future.展开更多
A series of blue and blue‑green Ir(Ⅲ)complexes has been investigated theoretically to explore their electronic structures,photophysical properties,efficiency roll‑off effect,and thermal activation delayed fluorescenc...A series of blue and blue‑green Ir(Ⅲ)complexes has been investigated theoretically to explore their electronic structures,photophysical properties,efficiency roll‑off effect,and thermal activation delayed fluorescence(TADF)properties.All calculations were performed using density functional theory(DFT)and time‑dependent density functional theory(TDDFT).Calculations for electronic structures,frontier molecular orbital characteristics(which determine the efficiency roll‑off effect of the complexes),and photophysical properties were conducted using the Gaussian 09 software package.The calculation of spin‑orbit coupling matrix elements<T|HSOC|S>,which determine the TADF properties of the complexes,was performed using the ORCA software package.The calculation results show that the auxiliary ligand tetraphenylimidodiphosphinate(tpip),a strong electron‑withdrawing group,can mitigate the efficiency roll‑off effect of the complex.Furthermore,TADF is observed in one of the designed complexes,(F_(3)Phppy)_(2)Ir(tpip),where F_(3)Phppy=2‑[4‑(2,4,6‑trifluorophenyl)phenyl]pyridine.展开更多
Moxibustion is one of treatment modalities in Traditional Chinese Medicine（TCM）. Its working mechanism is activated through heat-induced local thermal stimulation. By reviewing and compiling clear, scientific analys...Moxibustion is one of treatment modalities in Traditional Chinese Medicine（TCM）. Its working mechanism is activated through heat-induced local thermal stimulation. By reviewing and compiling clear, scientific analysis of the biological and physiological effects from local thermal heat, the authors provides a coherent and systemic source to aid us to form an understanding of the mechanism of moxibustion’s promotion of qi and blood circulation throughout the body from local thermal stimulation. This has been done by a rigorous review of previous studies of the thermal effect on the body. The following presents the local, distal and systemic biological effects from local thermal stimulation while also discussing the similarities and differences between local thermal stimulation and moxibustion.展开更多
Molecular dynamics （MD） simulations of monocrystalline copper （100） surface during nanomachining process were performed based on a new 3D simulation model. The material removal mechanism and system temperature dis...Molecular dynamics （MD） simulations of monocrystalline copper （100） surface during nanomachining process were performed based on a new 3D simulation model. The material removal mechanism and system temperature distribution were discussed. The simulation results indicate that the system temperature distribution presents a roughly concentric shape, a steep temperature gradient is observed in diamond cutting tool, and the highest temperature is located in chip. Centrosymmetry parameter method was used to monitor defect structures. Dislocations and vacancies are the two principal types of defect structures. Residual defect structures impose a major change on the workpiece physical properties and machined surface quality. The defect structures in workpiece are temperature dependent. As the temperature increases, the dislocations are mainly mediated from the workpiece surface, while the others are dissociated into point defects. The relatively high cutting speed used in nanomachining results in less defect structures, beneficial to obtain highly machined surface quality.展开更多
A DC to 5GHz series MEMS switch is designed and fabricated for wireless communication applications,and thermal effect and power handling of the series switch are discussed.The switch is made on glass substrate,and gol...A DC to 5GHz series MEMS switch is designed and fabricated for wireless communication applications,and thermal effect and power handling of the series switch are discussed.The switch is made on glass substrate,and gold platinum contact is used to get a stable and little insert loss.From DC to 5GHz,0 6dB insertion loss,30dB isolation,and 30μs delay are demonstrated.Thermal effect of the switch is tested in 85℃ and -55℃ atmosphere separately.From DC to 4GHz,the insert loss of the switch increases 0 2dB in 85℃ and 0 4dB in -55℃,while the isolation holds the same value as that in room temperature.To measure the power handling capability of the switch,we applied a continuous RF power increasing from 10dBm to 35 1dBm with the step of 1 0dBm across the switch at 4GHz.The switch keeps working and shows a decrease of the insert loss for 0 1～0 6dB.The maximum continuous power handling (35 1dBm,about 3 24W) is higer than the reported value of shunt switch (about 420mW),which implies series switches have much better power handling capability.展开更多
Boom Clay is one of the potential host rocks for deep geological disposal of high-level radioactive nuclear waste in Belgium. In order to investigate the mechanism of hydraulic conductivity variation under complex the...Boom Clay is one of the potential host rocks for deep geological disposal of high-level radioactive nuclear waste in Belgium. In order to investigate the mechanism of hydraulic conductivity variation under complex thermo-mechanical coupling conditions and to better understand the thermo-hydromechanical(THM) coupling behaviour of Boom Clay, a series of permeability tests using temperaturecontrolled triaxial cell has been carried out on the Boom Clay samples taken from Belgian underground research laboratory(URL) HADES. Due to its sedimentary nature, Boom Clay presents acrossanisotropy with respect to its sub-horizontal bedding plane. Direct measurements of the vertical(Kv)and horizontal(Kh)hydraulic conductivities show that the hydraulic conductivity at 80℃ is about 2.4 times larger than that at room temperature(23℃), and the hydraulic conductivity variation with temperature is basically reversible during heatingecooling cycle. The anisotropic property of Boom Clay is studied by scanning electron microscope(SEM) tests, which highlight the transversely isotropic characteristics of intact Boom Clay. It is shown that the sub-horizontal bedding feature accounts for the horizontal permeability higher than the vertical one. The measured increment in hydraulic conductivity with temperature is lower than the calculated one when merely considering the changes in water kinematic viscosity and density with temperature. The nuclear magnetic resonance(NMR) tests have also been carried out to investigate the impact of microstructure variation on the THM properties of clay. The results show that heating under unconstrained boundary condition will produce larger size of pores and weaken the microstructure. The discrepancy between the hydraulic conductivity experimentally measured and predicted(considering water viscosity and density changes with temperature) can be attributed to the microstructural weakening effect on the thermal volume change behaviour of Boom Clay. Based on the experimental results, a hydraulic conductivity evolution model is proposed and then implemented in ABAQUS. Three-dimensional(3D) numerical simulation of the admissible thermal loading for argillaceous storage(ATLAS) Ⅲ in situ heating test has been conducted subsequently, and the numerical results are in good agreement with field measurements.展开更多
As air descends the intake shaft, its infrastructure, lining and the strata will emit heat during the night when the intake air is cool and, on the contrary, will absorb heat during the day when the temperature of the...As air descends the intake shaft, its infrastructure, lining and the strata will emit heat during the night when the intake air is cool and, on the contrary, will absorb heat during the day when the temperature of the air becomes greater than that of the strata. This cyclic phenomenon, also known as the "thermal damping effect" will continue throughout the year reducing the effect of surface air temperature variation. The objective of this paper is to quantify the thermal damping effect in vertical underground airways. A nonlinear autoregressive time series with external input(NARX) algorithm was used as a novel method to predict the dry-bulb temperature(Td) at the bottom of intake shafts as a function of surface air temperature. Analyses demonstrated that the artificial neural network(ANN) model could accurately predict the temperature at the bottom of a shaft. Furthermore, an attempt was made to quantify typical "damping coefficient" for both production and ventilation shafts through simple linear regression models. Comparisons between the collected climatic data and the regression-based predictions show that a simple linear regression model provides an acceptable accuracy when predicting the Tdat the bottom of intake shafts.展开更多
A new approach in combination of the effective medium theory with the equivalent unit in numerical simulation was developed to study the effective thermal conductivity of porous ceramics. The finite element method was...A new approach in combination of the effective medium theory with the equivalent unit in numerical simulation was developed to study the effective thermal conductivity of porous ceramics. The finite element method was used to simulate the heat transfer process which enables to acquire accurate results through highly complicated modeling and intensive computation. An alternative approach to mesh the material into small cells was also presented. The effective medium theory accounts for the effective thermal conductivity of cells while the equivalent unit is subsequently applied in numerical simulation to analyze the effective thermal conductivity of the porous ceramics. A new expression for the effective thermal conductivity, allowing for some structure factors such as volume fraction of pores and thermal conductivity, was put forward, and the results of its application was proved to be close to those of the mathematical simulation.展开更多
A key design issue related to the turbopump of the rocket engine is that cavitation occurs in cryogenic fluids when the fluid pressure is lower than the vapor pressure at a local thermodynamic state. Cavitation in cry...A key design issue related to the turbopump of the rocket engine is that cavitation occurs in cryogenic fluids when the fluid pressure is lower than the vapor pressure at a local thermodynamic state. Cavitation in cryogenic fluids generates substantial thermal effects and strong variations in fluid properties, which in turn alter the cavity characteristics. To date, fewer investigate the thermal effect on cavitation in cryogenic fluids clearly by the numerical methods due to the difficulty of the heat transfer in the phase change process. In order to study the thermal effect on cavitation in cryogenic fluid, computations are conducted around a 2D quarter caliber hydrofoil in liquid nitrogen and hydrogen respectively by implementing modified Merkle cavitation model, which accounts for the energy balance and variable thermodynamic properties of the fluid. The numerical results show that with the thermal effect, the vapour content in constant location decreases, the cavity becomes more porous and the interface becomes less distinct which shows increased spreading while getting shorter in length. In the cavity region, the temperature around the cavity depresses due to absorb the evaporation latent heat and the saturation pressure drops. When the vapour volume fraction is higher, the temperature depression and pressure depression becomes larger. It is also observed that a slight temperature rise is found above the reference fluid temperature at the cavity rear end attributed to the release of latent heat during the condensation process. When the fluid is operating close to its critical temperature, thermal effects on cavitation are more obviously in both the liquid nitrogen and hydrogen. The thermal effect on cavitation in liquid hydrogen is more distinctly compared with that in liquid nitrogen due to the density ratio, vapour pressure and other variable properties of the fluid. The investigation provides aid for the design of the cryogenic pump of the liquid rocket.展开更多
Seedling quality is a prerequisite for successful field performance and therefore influences crop yields. Temperature and illumination are two major factors affecting seedling quality during nursery propagation. Subop...Seedling quality is a prerequisite for successful field performance and therefore influences crop yields. Temperature and illumination are two major factors affecting seedling quality during nursery propagation. Suboptimal temperature or light of nurseries generally result in leggy or weak seedlings and great economic loss. However, production of healthy seedlings is challenging due to the lack of knowledge in systemic management of nursery environments. In this study, we have established simulation models to predict how temperature and illumination coordinately influence the growth of tomato and cabbage seedlings. Specifically, correlation between seedling quality characteristics(root-shoot ratio, G value(growth function: defined as ratio of whole plant dry weight to days of seedling), healthy indexes) and TEP(thermal effectiveness and photosynthetically active radiation) were explored to establish the models, which were validated with independent test data. Our results suggested that the curve of healthy index 1(HI1) and TEP fitted well with high coefficient of determination(R2) in both species, indicating that the model is highly reliable. The HI1 simulation models for tomato and cabbage are HI1=0.0009e0.0308TEP-0.0015 and HI1= 0.0003e0.0671TEP-0.0003, respectively, which can be used for predicting vigors of tomato and cabbage seedlings grown under different temperature and light conditions.展开更多
文摘Objective The use of lasers has been an important part of urology in the treatment of stone and prostate disease.The thermal effects of lasers in lithotripsy have been a subject of debate over the years.The objective of this review was to assess the current state of knowledge available on the thermal effects of lasers in lithotripsy,as well as explore any new areas where studies are needed.Methods In August 2022,a keyword search on Google Scholar,PubMed,and Scopus for all papers containing the phrases“thermal effects”AND“laser”AND“lithotripsy”AND“urology”was done followed by citation jumping to other studies pertaining to the topic and 35 relevant papers were included in our study.The data from relevant papers were segregated into five groups according to the factor studied and type of study,and tables were created for a comparison of data.Results Temperature above the threshold of 43℃ was reached only when the power was>40 W and when there was adequate irrigation(at least 15–30 mL/min).Shorter lasing time divided by lithotripsy time or operator duty cycles less than 70%also resulted in a smaller temperature rise.Conclusion At least eight factors modify the thermal effects of lasers,and most importantly,the use of chilled irrigation at higher perfusion rates,lower power settings of<40 W,and with a shorter operator duty cycle will help to prevent thermal injuries from occurring.Stones impacted in the ureter or pelvi-ureteric junction further increase the probability of thermal injuries during laser firing.
文摘During the propagation of high-power lasers within internal channels,the laser beam heats the propagation medium,causing the thermal blooming effect that degrades the beam quality at the output.The intricate configuration of the optical path within the internal channel necessitates complex and time-consuming efforts to assess the impact of thermal blooming effect on the optical path.To meet the engineering need for rapid evaluation of thermal blooming effect in optical paths,this study proposed a rapid simulation method for the thermal blooming effect in internal optical paths based on the finite element method.This method discretized the fluid region into infinitesimal elements and employed finite element method for flow field analysis.A simplified analytical model of the flow field region in complex internal channels was established,and regions with similar thermal blooming effect were divided within this model.Based on the calculated optical path differences within these regions,numerical simulations of phase distortion caused by thermal blooming were conducted.The calculated result were compared with those obtained using the existing methods.The findings reveal that for complex optical paths,the discrepancy between the two approaches is less than 3.6%,with similar phase distortion patterns observed.For L-type units,this method and the existing methods identify the same primary factors influencing aberrations and exhibit consistent trends in their variation.This method was used to analyze the impact of thermal blooming effect in a straight channel under different gravity directions.The results show that phase distortion varies with changes in the direction of gravity,and the magnitude of the phase difference is strongly correlated with the component of gravity perpendicular to the optical axis.Compared to the existing methods,this approach offers greater flexibility,obviates the need for complex custom analysis programming.The analytical results of this method enable a rapid assessment of the thermal blooming effect in optical paths within the internal channel.This is especially useful during the engineering design.These results also provide crucial references for developing strategies to suppress thermal blooming effect.
文摘A comprehensive numerical investigation into mixed⁃mode delamination is presented in this study.It aims to assess the impact of thermal and friction effects through mixed⁃mode flexure crack propagation testing.Finite element analysis was employed to model the delamination process,incorporating a contact cohesive zone model.This model couples the traction⁃separation law,the contact law,and the Coulomb friction law simultaneously.The thermomechanical analysis in this study is performed using a sequentially coupled approach,implemented with the finite element software ABAQUS.The findings underscore the importance of this study.
基金support from the National Natural Science Foundation of China(Grant No.12272146)the Fundamental Research Funds for the Central Universities(Grant No.2024BRA009)the Young Top-notch Talent Cultivation Program of Hubei Province,is appreciated.
文摘Twisted polymer artificial muscles activated by thermal heating represent a new class of soft actuators capable of generating torsional actuation.The thermal torsion effect,characterized by the reversible untwisting of twisted fibers as temperature increases due to greater radial than axial thermal expansion,is crucial to the actuation performance of these artificial muscles.This study explores the thermal torsion effect of polymer muscles made of twisted Nylon 6 fibers in experimental and theoretical aspects,focusing on the interplay between material properties and temperature.It is revealed that the thermal torsion effect enhances the actuation performance of the twisted polymer actuator while the thermal softening effect diminishes it.A thermal-mechanical model incorporating both the thermal torsion effect and thermal softening effect is used to predict the recovered torque of the twisted polymer actuators.An optimal bias angle and operating temperature are identified to maximize the recovered torque.Analysis of strain and stress distributions in the cross-section of the twisted polymer fiber shows that the outer layers of the fiber predominantly contribute to the torsional actuation.This work aids in the precise control and structural optimization of the thermally-activated twisted polymer actuators.
基金supported by the National Natural Science Fund of China (Grant Nos.U22A20166 and 52374131)the Shenzhen Science and Technology Program (Grant No.JCYJ20220531102012028)the Young Elite Scientists Sponsorship Program by CAST.
文摘The stimulation of shale reservoirs frequently involves significant shear failure,which is crucial for creating fracture networks and enhancing permeability to boost production.As the depth of extraction increases,the impact of elevated temperatures on the anisotropic shear strength and failure mechanisms of shale becomes pronounced,yet there is a notable lack of relevant research.This study conducts,for the first time,direct shear experiment on shales at four different temperatures and seven bedding angles.By employing acoustic emission(AE)and digital image correlation(DIC)techniques,the evolution of damage and the mechanism of crack propagation under anisotropic direct shearing at varying temperatures is revealed.The results indicate that both shear displacement and strength of shale increase with temperature across different bedding angles.Additionally,shale demonstrates distinct brittle failure characteristics under various conditions during direct shearing tests.The types of anisotropic shear failure observed under the influence of temperature include central shearing fracture,central shearing with secondary fracture,and deflected slip along the bedding.Moreover,the temperature effect enhances shear-induced crack propagation along bedding planes.Shear failure in shale predominantly occurs during higher loading stages,which coincide with a substantial amount of AE signals.Finally,the introduction of the anisotropy index and temperature sensitivity coefficient further elucidates the interaction mechanism between thermal effects and anisotropy.This study offers a novel methodology to explore the anisotropic shear failure behavior of shale under elevated temperatures,and also provides crucial theoretical and experimental insights into shear failure behavior relevant to practical shale reservoir stimulation.
基金appreciation to King Saud University for funding this work through researchers supporting project(No.RSPD2025R1056).
文摘The thermal nanofluids have garnered widespread attention for their use in multiple thermal systems,including heating processes,sustainable energy,and nuclear reactions.Research on nanofluids has revealed that the thermal efficiencies of such materials are adversely affected by various thermal features.The purpose of the current work is to demonstrate the thermal analysis of Jeffrey nanofluids with the suspension of microorganisms in the presence of variable thermal sources.The variable effects of thermal conductivity,Brownian diffusivity,and motile density are utilized.The investigated model also reveals the contributions of radiation phenomena and chemical reactions.A porous,saturated,moving surface with a suction phenomenon promotes flow.The modeling of the problem is based on the implementation of the Cattaneo-Christov approach.The convective thermal constraints are used to promote the heat transfer features.A simplified form of the governing model is treated with the assistance of a shooting technique.The physical effects of different parameters for the problem are presented.The current problem justifies its applications in heat transfer,coating processes,heat exchangers,cooling systems in microelectronics,solar systems,chemical processes,etc.
基金financially supported by the Ph.D. start-up funds of Jiangxi Science and Technology Normal University (Nos. 2023BSQD11, 2023BSQD13)Jiangxi Province Key Laboratory of Organic Functional Molecules (No. 2024SSY05141)。
文摘The exploitation of organic-inorganic hybrid perovskites(OIHPs) as active layer materials for typical sandwich-structured resistive memories has attracted widespread interest due to the property of low power consumption and fast switching. However, the inherent thermal instability of perovskites limits the application of OIHPs-based resistive memories under extreme conditions, while the infiuence of thermal effects on their resistance change characteristics remains unclear. Herein, a novel 2D <100>-oriented high-temperature resistant OIHP [(BIZ-H)_(2)(PbBr_(4))]n(BIZ = benzimidazole) is prepared as an active layer material to fabricate FTO/[(BIZ-H)_(2)(PbBr_(4))]n/Ag resistive memory with excellent thermal reproducibility and stability up to 120℃. The increase in temperature leads to a decrease in the PbBr_(6) octahedral distortion in the crystal structure, an increase in hydrogen bonding between the(BIZ-H)+cation and the(PbBr_(4))_(n)^(2n-)layer, and a shortening of the spacing of the inorganic layers, which is found to result in the creation and predominance of thermally activated traps with increasing temperature. This work provides a new direction for the next generation of OIHPs-based resistive memories with high-temperature tolerance.
基金supported by the National Natural Science Foundation of China(No.11974216,No.12374269)the support of the Taishan Scholar Project of Shandong Province。
文摘Multi-resonance thermally ac-tivated delayed fluorescence(MR-TADF)emitters are one of the most excellent materi-als for high performance or-ganic light-emitting diodes(OLEDs)with high color puri-ty benefiting from their nar-row full width at half maxi-mum(FWHM)and great de-vice performance.However,small spin-orbit coupling(SOC)is one of drawbacks for MR-TADF emitters and introduction of heavy atoms may be one effective solution.In this work,four MR-TADF molecules with different atoms(O,S,Se)are carried out based on the first-principles calculation,and excited state dynamics in both toluene and solid phase is investi-gated.Our calculation results indicate that heavy atoms could induce smaller adiabatic ener-gy gap and larger SOC between the first singlet excited state and the first triplet excited state,which is advantageous for the conversion of singlet and triplet excitons,and thus the generation of thermally activated delayed fluorescence(TADF).Though the reorganization energy and full width at half maximum(FWHM)of emission are increased,the influence is quite limited.Besides,the fluorescent rates are also little influenced.Our calculation results indicate that heavy atom introduction is an efficient strategy to enhance the SOC values of MR-TADF emitters without influencing other properties significantly.
基金funded by the Independent Innovation Project of Changjiang Institute of Survey,Planning,Design and Research Corporation (CX2020Z32)supported by the National Natural Science Foundation of China (Grant Numbers42204006 and 42104028)the Open Fund of Hubei Luojia Laboratory (Grant Numbers 230100020 and 230100019)
文摘The monument thermal effect(MTE)displacements could result in periodical signals with several mil-limeters magnitudes in the vertical and horizontal GPS position time series.However,the interaction ofvarious origins of periodic signals in GPS observations makes it difficult to isolate the millimeter-levelMTE displacement from other signals and noises.In this study,to assess the diurnal and semidiurnalsignals induced by MTE,we processed 12 very short GPS baselines(VSGB)with length<150 m.Themonument pairs for each baseline differ in their heights,horizontal structure,or base foundations.Meanwhile,two zero-baselines were also processed as the control group.Results showed that the sea-sonal signals observed in VSGB time series in the horizontal and vertical directions,were mainly inducedby seasonal MTE.Time-varying diurnal and semidiurnal signals with amplitude up to 4 mm wereobserved in the vertical direction for baselines with monument height difference(MHD)larger than10 m.Horizontal diurnal signal with an amplitude of about 2 mm was also detected for baselines withnon-axisymmetric monument structure.The orientation of the detected horizontal displacement wascoherent with the direction of daily temperature variation(DTV)driven by direct solar radiation,whichindicates that the diurnal and semidiurnal signals are likely induced by MTE.The observed high-frequency MTE displacements,if not well modeled and removed,may propagate into spurious long-term signals and bias the velocity estimation in the daily GPS time series.
基金Project supported by the National Key R&D Project from Ministry of Science and Technology of China(Grant No.2022YFA1203100)the National Natural Science Foundation of China(Grant No.52122606)the funding from Shanghai Polytechnic University.
文摘As the size of transistors shrinks and power density increases,thermal simulation has become an indispensable part of the device design procedure.However,existing works for advanced technology transistors use simplified empirical models to calculate effective thermal conductivity in the simulations.In this work,we present a dataset of size-dependent effective thermal conductivity with electron and phonon properties extracted from ab initio computations.Absolute in-plane and cross-plane thermal conductivity data of eight semiconducting materials(Si,Ge,GaN,AlN,4H-SiC,GaAs,InAs,BAs)and four metallic materials(Al,W,TiN,Ti)with the characteristic length ranging from 5 nm to 50 nm have been provided.Besides the absolute value,normalized effective thermal conductivity is also given,in case it needs to be used with updated bulk thermal conductivity in the future.
文摘A series of blue and blue‑green Ir(Ⅲ)complexes has been investigated theoretically to explore their electronic structures,photophysical properties,efficiency roll‑off effect,and thermal activation delayed fluorescence(TADF)properties.All calculations were performed using density functional theory(DFT)and time‑dependent density functional theory(TDDFT).Calculations for electronic structures,frontier molecular orbital characteristics(which determine the efficiency roll‑off effect of the complexes),and photophysical properties were conducted using the Gaussian 09 software package.The calculation of spin‑orbit coupling matrix elements<T|HSOC|S>,which determine the TADF properties of the complexes,was performed using the ORCA software package.The calculation results show that the auxiliary ligand tetraphenylimidodiphosphinate(tpip),a strong electron‑withdrawing group,can mitigate the efficiency roll‑off effect of the complex.Furthermore,TADF is observed in one of the designed complexes,(F_(3)Phppy)_(2)Ir(tpip),where F_(3)Phppy=2‑[4‑(2,4,6‑trifluorophenyl)phenyl]pyridine.
基金Supported by grants from the National Natural Science Foundation of China:8137375
文摘Moxibustion is one of treatment modalities in Traditional Chinese Medicine（TCM）. Its working mechanism is activated through heat-induced local thermal stimulation. By reviewing and compiling clear, scientific analysis of the biological and physiological effects from local thermal heat, the authors provides a coherent and systemic source to aid us to form an understanding of the mechanism of moxibustion’s promotion of qi and blood circulation throughout the body from local thermal stimulation. This has been done by a rigorous review of previous studies of the thermal effect on the body. The following presents the local, distal and systemic biological effects from local thermal stimulation while also discussing the similarities and differences between local thermal stimulation and moxibustion.
基金Project (50925521) supported by the National Natural Science Fund for Distinguished Young Scholars of China
文摘Molecular dynamics （MD） simulations of monocrystalline copper （100） surface during nanomachining process were performed based on a new 3D simulation model. The material removal mechanism and system temperature distribution were discussed. The simulation results indicate that the system temperature distribution presents a roughly concentric shape, a steep temperature gradient is observed in diamond cutting tool, and the highest temperature is located in chip. Centrosymmetry parameter method was used to monitor defect structures. Dislocations and vacancies are the two principal types of defect structures. Residual defect structures impose a major change on the workpiece physical properties and machined surface quality. The defect structures in workpiece are temperature dependent. As the temperature increases, the dislocations are mainly mediated from the workpiece surface, while the others are dissociated into point defects. The relatively high cutting speed used in nanomachining results in less defect structures, beneficial to obtain highly machined surface quality.
文摘A DC to 5GHz series MEMS switch is designed and fabricated for wireless communication applications,and thermal effect and power handling of the series switch are discussed.The switch is made on glass substrate,and gold platinum contact is used to get a stable and little insert loss.From DC to 5GHz,0 6dB insertion loss,30dB isolation,and 30μs delay are demonstrated.Thermal effect of the switch is tested in 85℃ and -55℃ atmosphere separately.From DC to 4GHz,the insert loss of the switch increases 0 2dB in 85℃ and 0 4dB in -55℃,while the isolation holds the same value as that in room temperature.To measure the power handling capability of the switch,we applied a continuous RF power increasing from 10dBm to 35 1dBm with the step of 1 0dBm across the switch at 4GHz.The switch keeps working and shows a decrease of the insert loss for 0 1～0 6dB.The maximum continuous power handling (35 1dBm,about 3 24W) is higer than the reported value of shunt switch (about 420mW),which implies series switches have much better power handling capability.
基金financial support of the National Science Foundation for Distinguished Young Scholars (Grant No. 51225902)Natural Science Foundation of China (Grant No. 51479190)EURIDICE (European Underground Research Infrastructure for Disposal of Nuclear Waste in Clay Environment, Mol, Belgium) for the work presented in this paper
文摘Boom Clay is one of the potential host rocks for deep geological disposal of high-level radioactive nuclear waste in Belgium. In order to investigate the mechanism of hydraulic conductivity variation under complex thermo-mechanical coupling conditions and to better understand the thermo-hydromechanical(THM) coupling behaviour of Boom Clay, a series of permeability tests using temperaturecontrolled triaxial cell has been carried out on the Boom Clay samples taken from Belgian underground research laboratory(URL) HADES. Due to its sedimentary nature, Boom Clay presents acrossanisotropy with respect to its sub-horizontal bedding plane. Direct measurements of the vertical(Kv)and horizontal(Kh)hydraulic conductivities show that the hydraulic conductivity at 80℃ is about 2.4 times larger than that at room temperature(23℃), and the hydraulic conductivity variation with temperature is basically reversible during heatingecooling cycle. The anisotropic property of Boom Clay is studied by scanning electron microscope(SEM) tests, which highlight the transversely isotropic characteristics of intact Boom Clay. It is shown that the sub-horizontal bedding feature accounts for the horizontal permeability higher than the vertical one. The measured increment in hydraulic conductivity with temperature is lower than the calculated one when merely considering the changes in water kinematic viscosity and density with temperature. The nuclear magnetic resonance(NMR) tests have also been carried out to investigate the impact of microstructure variation on the THM properties of clay. The results show that heating under unconstrained boundary condition will produce larger size of pores and weaken the microstructure. The discrepancy between the hydraulic conductivity experimentally measured and predicted(considering water viscosity and density changes with temperature) can be attributed to the microstructural weakening effect on the thermal volume change behaviour of Boom Clay. Based on the experimental results, a hydraulic conductivity evolution model is proposed and then implemented in ABAQUS. Three-dimensional(3D) numerical simulation of the admissible thermal loading for argillaceous storage(ATLAS) Ⅲ in situ heating test has been conducted subsequently, and the numerical results are in good agreement with field measurements.
基金funded by National Institute for Occupational Safety and Health (NIOSH) (No. 2014-N-15795, 2014)
文摘As air descends the intake shaft, its infrastructure, lining and the strata will emit heat during the night when the intake air is cool and, on the contrary, will absorb heat during the day when the temperature of the air becomes greater than that of the strata. This cyclic phenomenon, also known as the "thermal damping effect" will continue throughout the year reducing the effect of surface air temperature variation. The objective of this paper is to quantify the thermal damping effect in vertical underground airways. A nonlinear autoregressive time series with external input(NARX) algorithm was used as a novel method to predict the dry-bulb temperature(Td) at the bottom of intake shafts as a function of surface air temperature. Analyses demonstrated that the artificial neural network(ANN) model could accurately predict the temperature at the bottom of a shaft. Furthermore, an attempt was made to quantify typical "damping coefficient" for both production and ventilation shafts through simple linear regression models. Comparisons between the collected climatic data and the regression-based predictions show that a simple linear regression model provides an acceptable accuracy when predicting the Tdat the bottom of intake shafts.
文摘A new approach in combination of the effective medium theory with the equivalent unit in numerical simulation was developed to study the effective thermal conductivity of porous ceramics. The finite element method was used to simulate the heat transfer process which enables to acquire accurate results through highly complicated modeling and intensive computation. An alternative approach to mesh the material into small cells was also presented. The effective medium theory accounts for the effective thermal conductivity of cells while the equivalent unit is subsequently applied in numerical simulation to analyze the effective thermal conductivity of the porous ceramics. A new expression for the effective thermal conductivity, allowing for some structure factors such as volume fraction of pores and thermal conductivity, was put forward, and the results of its application was proved to be close to those of the mathematical simulation.
基金supported by National Natural Science Foundation of China(Grant No. 50979004)Doctor Reserch Fund of Univercity of China(Grant No. 20080070027)
文摘A key design issue related to the turbopump of the rocket engine is that cavitation occurs in cryogenic fluids when the fluid pressure is lower than the vapor pressure at a local thermodynamic state. Cavitation in cryogenic fluids generates substantial thermal effects and strong variations in fluid properties, which in turn alter the cavity characteristics. To date, fewer investigate the thermal effect on cavitation in cryogenic fluids clearly by the numerical methods due to the difficulty of the heat transfer in the phase change process. In order to study the thermal effect on cavitation in cryogenic fluid, computations are conducted around a 2D quarter caliber hydrofoil in liquid nitrogen and hydrogen respectively by implementing modified Merkle cavitation model, which accounts for the energy balance and variable thermodynamic properties of the fluid. The numerical results show that with the thermal effect, the vapour content in constant location decreases, the cavity becomes more porous and the interface becomes less distinct which shows increased spreading while getting shorter in length. In the cavity region, the temperature around the cavity depresses due to absorb the evaporation latent heat and the saturation pressure drops. When the vapour volume fraction is higher, the temperature depression and pressure depression becomes larger. It is also observed that a slight temperature rise is found above the reference fluid temperature at the cavity rear end attributed to the release of latent heat during the condensation process. When the fluid is operating close to its critical temperature, thermal effects on cavitation are more obviously in both the liquid nitrogen and hydrogen. The thermal effect on cavitation in liquid hydrogen is more distinctly compared with that in liquid nitrogen due to the density ratio, vapour pressure and other variable properties of the fluid. The investigation provides aid for the design of the cryogenic pump of the liquid rocket.
基金supported by the National Key Research and Development Program of China (2018YFD0201203)the Independent Innovation of Agricultural Science and Technology in Jiangsu Province, China (CX (15)1015)the Priority Academic Program Development of Jiangsu Higher Education Institutions, China
文摘Seedling quality is a prerequisite for successful field performance and therefore influences crop yields. Temperature and illumination are two major factors affecting seedling quality during nursery propagation. Suboptimal temperature or light of nurseries generally result in leggy or weak seedlings and great economic loss. However, production of healthy seedlings is challenging due to the lack of knowledge in systemic management of nursery environments. In this study, we have established simulation models to predict how temperature and illumination coordinately influence the growth of tomato and cabbage seedlings. Specifically, correlation between seedling quality characteristics(root-shoot ratio, G value(growth function: defined as ratio of whole plant dry weight to days of seedling), healthy indexes) and TEP(thermal effectiveness and photosynthetically active radiation) were explored to establish the models, which were validated with independent test data. Our results suggested that the curve of healthy index 1(HI1) and TEP fitted well with high coefficient of determination(R2) in both species, indicating that the model is highly reliable. The HI1 simulation models for tomato and cabbage are HI1=0.0009e0.0308TEP-0.0015 and HI1= 0.0003e0.0671TEP-0.0003, respectively, which can be used for predicting vigors of tomato and cabbage seedlings grown under different temperature and light conditions.
