BACKGROUND Orthopaedic surgical education has traditionally depended on the apprenticeship model of“see one,do one,teach one”.However,reduced operative exposure,stricter work-hour regulations,medicolegal constraints...BACKGROUND Orthopaedic surgical education has traditionally depended on the apprenticeship model of“see one,do one,teach one”.However,reduced operative exposure,stricter work-hour regulations,medicolegal constraints,and patient safety concerns have constrained its practicality.Simulation-based training has become a reliable,safe,and cost-efficient alternative.Dry lab techniques,especially virtual and augmented reality,make up 78%of current dry lab research,whereas wet labs still set the standard for anatomical realism.AIM To evaluate the effectiveness,limitations,and future directions of wet and dry lab simulation in orthopaedic training.METHODS A scoping review was carried out across four databases-PubMed,Cochrane Library,Web of Science,and EBSCOhost-up to 2025.Medical Subject Headings included:"Orthopaedic Education","Wet Lab","Dry Lab","Simulation Training","Virtual Reality",and"Surgical Procedure".Eligible studies focused on orthopaedic or spinal surgical education,employed wet or dry lab techniques,and assessed training effectiveness.Exclusion criteria consisted of non-English publications,abstracts only,non-orthopaedic research,and studies unrelated to simulation.Two reviewers independently screened titles,abstracts,and full texts,resolving discrepancies with a third reviewer.RESULTS From 1851 records,101 studies met inclusion:78 on dry labs,7 on wet labs,4 on both.Virtual reality(VR)simulations were most common,with AI increasingly used for feedback and assessment.Cadaveric training remains the gold standard for accuracy and tactile feedback,while dry labs-especially VR-offer scalability,lower cost(40%-60%savings in five studies),and accessibility for novices.Senior residents prefer wet labs for complex tasks;juniors favour dry labs for basics.Challenges include limited transferability data,lack of standard outcome metrics,and ethical concerns about cadaver use and AI assessment.CONCLUSION Wet and dry labs each have unique strengths in orthopaedic training.A hybrid approach combining both,supported by standardised assessments and outcome studies,is most effective.Future efforts should aim for uniform reporting,integrating new technologies,and policy support for hybrid curricula to enhance skills and patient care.展开更多
This study introduces a new ocean surface friction velocity scheme and a modified Thompson cloud microphysics parameterization scheme into the CMA-TYM model.The impact of these two parameterization schemes on the pred...This study introduces a new ocean surface friction velocity scheme and a modified Thompson cloud microphysics parameterization scheme into the CMA-TYM model.The impact of these two parameterization schemes on the prediction of the movement track and intensity of Typhoon Kompasu in 2021 is examined.Additionally,the possible reasons for their effects on tropical cyclone(TC)intensity prediction are analyzed.Statistical results show that both parameterization schemes improve the predictions of Typhoon Kompasu’s track and intensity.The influence on track prediction becomes evident after 60 h of model integration,while the significant positive impact on intensity prediction is observed after 66 h.Further analysis reveals that these two schemes affect the timing and magnitude of extreme TC intensity values by influencing the evolution of the TC’s warm-core structure.展开更多
Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The t...Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.展开更多
Analysis of the environmental and economic performance of fishing vessels has received limited attention compared with other ship types despite their notable contribution to global greenhouse gas(GHG)emissions.This st...Analysis of the environmental and economic performance of fishing vessels has received limited attention compared with other ship types despite their notable contribution to global greenhouse gas(GHG)emissions.This study evaluates the carbon footprint(CF)and economic viability of a liquefied natural gas(LNG)-fueled fishing vessel,using real engine operation simulations to provide precise and dynamic evaluation of fuel consumption and GHG emissions.Operational profiles are obtained through the utilization of onboard monitoring systems,whereas engine performance is simulated using the 1D/0D AVL Boost^(TM)model.Life cycle assessment(LCA)is conducted to quantify the environmental impact,whereas life cycle cost assessment(LCCA)is performed to analyze the profitability of LNG as an alternative fuel.The potential impact of the future fuel price uncertainties is addressed using Monte Carlo simulations.The LCA findings indicate that LNG has the potential to reduce the CF of the vessel by 14%to 16%,in comparison to a diesel power system configuration that serves as the baseline scenario.The LCCA results further indicate that the total cost of an LNG-powered ship is lower by 9.5%-13.8%,depending on the share of LNG and pilot fuels.This finding highlights the potential of LNG to produce considerable environmental benefits while addressing economic challenges under diverse operational and fuel price conditions.展开更多
The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characte...The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of "ElectriceMagnetic eForce" and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10%. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and obtained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.展开更多
The personnel in refuge chamber absorb O_2 and exhale CO_2 all the time. Supplying O_2 and removing CO_2 are the basic function of refuge chamber. After disaster occurs, the supply of the compressed air or oxygen for ...The personnel in refuge chamber absorb O_2 and exhale CO_2 all the time. Supplying O_2 and removing CO_2 are the basic function of refuge chamber. After disaster occurs, the supply of the compressed air or oxygen for personnel in refuge chamber is limited. Thus, how to effectively use the compressed air and oxygen and try to improve the time of supply has a great significance. Supplying more oxygen will result in waste, while supplying less oxygen will cause its concentration to be lower, and harm life safety. This research uses the theoretical calculation and numerical simulation, finds critical gas supply for refuge chamber, and illuminates the change law of gas concentration with critical gas supply in refuge chamber,which provides theoretical guidance for effective use of compressed air and oxygen in refuge chamber.展开更多
Mass attenuation coefficients, effective atomic numbers, effective electron densities and Kerma relative to air for adipose, muscle and bone tissues have been investigated in the photon energy region from 20 keV up to...Mass attenuation coefficients, effective atomic numbers, effective electron densities and Kerma relative to air for adipose, muscle and bone tissues have been investigated in the photon energy region from 20 keV up to 50 MeV with Geant4 simulation package and theoretical calculations. Based on Geant4 results of the mass attenuation coefficients, the effective atomic numbers for the tissue models have been calculated. The calculation results have been compared with the values of the Auto-Zeff program and with other studies available in the literature. Moreover, Kerma of studied tissues relative to air has been determined and found to be dependent on the absorption edges of the tissue constituent elements.展开更多
The accurate measurement of the fill level in the ball mill has not been resolved because of the interplay of many variable factors, which led the mill to be operated under the uneconomical condition and lost a lot of...The accurate measurement of the fill level in the ball mill has not been resolved because of the interplay of many variable factors, which led the mill to be operated under the uneconomical condition and lost a lot of energy. At present, some methods, such as vibration method and acoustic method, have been applied for measuring the fill level by the researchers. Aiming at the problem of the traditional methods for measuring the fill level, that is, the feature variables of the fill level suffer the influences of the ball load and the water content of the coal, a novel method to measure the fill level is proposed and a possible relation between the fill level and the angular position of the maximum vibration point on the mill shell is investigated. The angular positions of the maximum vibration point on the mill shell for different fill level cases are calculated theoretically under two assumptions, respectively. Meanwhile the charge motions of the mill for different fill level cases are simulated with the discrete element method （DEM）. And the simulation results are verified by comparing the motion trajectories of steel balls and power draft of the mill. The simulated movement trajectories of the outmost layer steel balls in the mill are monitored and analyzed to obtain the angular positions of the maximum vibration point on the mill shell. Both the results of the theoretical calculation and the 3D DEM simulation show that the position of the maximum vibration point on the mill shell moves to a lower angular positions as the fill level decreasing, which provides a new idea for measuring the filllevel accurately.展开更多
Simulation law and physical simulation were used to study the kinematic behavior of inclusions in electromagnetic separation. It was found that velocity of spherical non metallic particles shares different functions i...Simulation law and physical simulation were used to study the kinematic behavior of inclusions in electromagnetic separation. It was found that velocity of spherical non metallic particles shares different functions in different Reynolds number range. The function of spherical particle’s velocity has been got by confirming the relationship between Reynolds number and resistance coefficient when Reynolds number is 0.2 ～10. For non spherical particles, the moving behavior is influenced by shape and orientation while spherical coefficient has nothing to do with the velocity of irregular particles. The influence of orientation of cuboid particle on the electromagnetic expulsive force has been indicated by numerical computation. [展开更多
A plasma is produced in air by using a high-intensity Q-switch Nd：YAG pulsed laser to irradiate a solid target, and the impulses delivering from the plasma to the target are measured at different laser power densitie...A plasma is produced in air by using a high-intensity Q-switch Nd：YAG pulsed laser to irradiate a solid target, and the impulses delivering from the plasma to the target are measured at different laser power densities. Analysing the formation process of laser plasma and the laser supported detonation wave （LSDW） and using fluid mechanics theory and Pirri＇s methods, an approximately theoretical solution of the impulse delivering from the plasma to the target under our experimental condition is found. Furthermore, according to the formation time of plasma and the variation of pressure in plasma in a non-equilibrium state, a physical model of the interaction between the pulse laser and the solid target is developed. The plasma evolutions with time during and after the laser pulse irradiating the target are simulated numerically by using a three-dimensional difference scheme. And the numerical solutions of the impulse delivering from the plasma to the target are obtained. A comparison among the theoretical, numerical and experimental results and their analyses are performed. The experimental results are explained reasonably. The consistency between numerical results and experimental results implies that the numerical calculation model used in this paper can well describe the mechanical action of the laser on the target.展开更多
A method for determination of tool-chip contact length is theoreticallypresented in orthogonal metal machining. By using computer simulation and based on the analyses ofthe elastro-plastic deformation with lagrangian ...A method for determination of tool-chip contact length is theoreticallypresented in orthogonal metal machining. By using computer simulation and based on the analyses ofthe elastro-plastic deformation with lagrangian finite element method in the deformation zone, theaccumulated representative length of the low layer, the tool-chip contact length of the chipcontacting the tool rake are calculated, experimental studies are also carried out with 0.2 percentcarbon steel. It is shown that the tool-chip contact lengths obtained from computer simulation havea good agreement with those of measured values.展开更多
The structure of cylindrical tri-sine oscillating tooth gear drive is presented. Based on the space meshing theory, equations of meshing and tooth profile are established and its meshing theory is studied. Using Pro/E...The structure of cylindrical tri-sine oscillating tooth gear drive is presented. Based on the space meshing theory, equations of meshing and tooth profile are established and its meshing theory is studied. Using Pro/E, this system is modeled and simulated,which is compared with the above-established equations.展开更多
Ti0.5Al0.25Ni0.25 alloy prepared by vacuum induction melting was studied.The phase composition was analyzed with X-ray technique and EDS analysis,and its electrochemical properties were investigated at various tempera...Ti0.5Al0.25Ni0.25 alloy prepared by vacuum induction melting was studied.The phase composition was analyzed with X-ray technique and EDS analysis,and its electrochemical properties were investigated at various temperatures.Electrochemical reaction kinetic parameters were also studied with proper electrochemical techniques.The influence of the secondary corrosion reaction on the anodic linear polarization measurement was also analyzed by theoretical simulation.The results show that,proper ball-milling with nickel powders is beneficial to electrochemical performance.The theoretical simulation proves that,the existence of the side reaction can disturb the measurement of electrochemical reaction kinetic parameters.展开更多
With comprehensive considerations of the operational safety and collection efficiency for the tracked miner collecting the seafloor poly-metallic nodules, two new improved mining paths for the miner on the deep seaflo...With comprehensive considerations of the operational safety and collection efficiency for the tracked miner collecting the seafloor poly-metallic nodules, two new improved mining paths for the miner on the deep seafloor were proposed. Compared to the conventional mining path, the design principles and superiorities of the two new paths are that the miner turning with relative long radius should avoid large sinkage and high slip, so as to ensure its operational safety, while the space between its straight-line trajectories before and after the turning is optimum, which is designed as the total width of the miner, and collect nodules as more as possible, so as to ensure its collection efficiency. To realize the new mining paths, theoretical designs and quantitative calculations were carried out to determine the exact positions for the speed controls of the miner during its whole operation process. With the new dynamic model of the miner, and through regulations of the speeds of the left and right tracks of the miner on the exact motion positions according to the theoretical calculations, the two new improved mining paths for the miner on the seafloor were successfully simulated, thus the turning radius of the miner in the simulation is about 21.8 m, while the distance between the straight-line trajectories before and after the turning is about 5.2 m. The dynamic simulation results preliminarily prove the feasibility of these two new mining paths, and further can provide important theoretical guidance and useful technical reference for the practical tracked miner operation and control on the seafloor.展开更多
Objective： To investigate the effectiveness of a high-fidelity teaching simulation based on an NLN/Jeffries simulation in the nursing education theoretical framework and its influencing factors. Methods： A high-fide...Objective： To investigate the effectiveness of a high-fidelity teaching simulation based on an NLN/Jeffries simulation in the nursing education theoretical framework and its influencing factors. Methods： A high-fidelity teaching simulation on clinical nursing practices using intelligent human analogues was conducted with 200 students, and The Simulation Design Scale, and the Student Satisfaction and Self-Confidence in Learning Scale developed by the National League for Nursing were used to evaluate the training effectiveness and its influencing factors. Results： For the high-fidelity teaching simulation, students gave scores of 4.36± 0.54 points for satisfaction and 4.33 ± 0.46 points for Self-Confidence. The students highly rated the five dimensions of teaching design, i.e., teaching objectives/information, assistance/support for students, problem solving, guided feedback, and fidelity. The teaching design was closely correlated with the satisfaction of the high-fidelity teaching simulation and self-efficacy, and the dimensions of teaching objectives/informa- tion and assistance/support for students were particularly strong predictors of teaching effectiveness. Conclusions： A high-fidelity teaching simulation based on Jeffries＇ theoretical framework improved student satisfaction with the simulation and their Self-Confidence. In planning simulations, teachers should take into account five characteristics, i.e., teaching objectives/information on simulation education, assistance/support for students, problem solving, guided reflection, and fidelity, to achieve better teaching effectiveness.展开更多
This paper aims to investigate the critical stability of a multi-degree-of-freedom(multi-DOF)real-time hybrid simulation(RTHS).First,the critical time-delay analysis models are developed using the continuous-and discr...This paper aims to investigate the critical stability of a multi-degree-of-freedom(multi-DOF)real-time hybrid simulation(RTHS).First,the critical time-delay analysis models are developed using the continuous-and discrete-time root locus(RL)techniques,respectively.A bilinear transform is introduced into the first-order Padéapproximation while conducting the discrete RL analysis.Based on this technique,the time delay can be explicitly used as the gain factor and thus the instability mechanism of the multi-DOF RTHS system can be analyzed.Subsequently,the critical time delays calculated by the continuous-and discrete-time RL techniques,respectively,are compared for a 2-DOF RTHS system.It is shown that assuming the RTHS system to be a continuous-time system will result in overestimating the critical time delay.Finally,theoretically calculated critical delays are demonstrated and validated by numerical simulation and a set of RTHS experiments.Parametric analysis provides a glimpse of the effects of time step,frequency and damping ratio in a performing partitioning scheme.The constructed analysis model proves to be useful for evaluating the critical time delay to predict stability and performance,therefore facilitating successful RTHS.展开更多
The power law model is the most widely used model for the rheological behavior of semi-solid metals(SSMs)in the numerical simulation of semi-solid processing.However,it is still not known why the anomalous negative fl...The power law model is the most widely used model for the rheological behavior of semi-solid metals(SSMs)in the numerical simulation of semi-solid processing.However,it is still not known why the anomalous negative flow exponent exists in the power law model for SSMs and its influence on the simulation.In this research,the rheological behavior of semi-solid Al-7Si-0.3Mg aluminum alloy is experimentally studied followed by modeling.The power law model fitting results show flow curves deviate from the experimental data and negative flow exponents,which are physically nonsensical and inapplicable to the simulation of SSMs flow proved by hydrodynamic analysis.This drawback of the power law model stems from neglecting the yield stress of SSMs.By contrast,the model referring Herschel-Bulkley(HB)theory which takes yield stress into consideration has reasonable flow exponent and yields good agreement between the fitting and experimental results.Furthermore,the simulation of die filling process is conducted,suggesting that the power law model over-optimistically predicts the tendency of blistering and misrun defects at low temperature and high filling velocity during semi-solid processing.展开更多
Diglycolamides(DGAs) show excellent application prospects for the extraction and separation of rare earth metals from highly radioactive liquid wastes and rare earth ores.The extraction ability of DGAs for rare earth ...Diglycolamides(DGAs) show excellent application prospects for the extraction and separation of rare earth metals from highly radioactive liquid wastes and rare earth ores.The extraction ability of DGAs for rare earth ions in nitrate or chloride media increases with increasing atomic number of the rare earth metal.To understand the origin of this phenomenon,three binuclear crystals [Ln(TEDGA)_(3)][Ln(NO_(3))_(6)] of N,N,N’,N’-tetraethyldiglycolamide(TEDGA) with rare earth ions La(Ⅲ),Pr(Ⅲ) and Eu(III) were prepared and characterized crystallographically.The three complexes belong to the triclinic crystal system,P-1 space group.The bond lengths of Ln-O_(amide) are significantly shorter than those of Ln-O_(ether) in the same crystal.The Ln-O_(amide) and Ln-O_(enher) bond lengths gradually decrease with increasing atomic number of the rare earth ion.The dihedral angle formed by TEDGA and metal ions through the tridentate coordination gradually increases with increasing metal ion atomic number,tending toward the formation of sizeable planar coordination structures for the most massive rare earth ions.The structures of the compounds formed by the extractant and metal ion were optimized by means of DFT simulations.We find that the interaction between TEDGA and the rare earth ion is dominated by electrostatic interaction by analyzing binding energy,WBIs,Mulliken charge,natural electron configurations,and molecular orbital interaction.The covalent component of the Ln-O bonds of the complexes increases with increasing metal atomic number.The observed increase in extraction and separation capacity of diglycolamides for rare earth ions with increasing atomic number might be due to the formation of two fivemember rings by one tridentate ligand.The rare earth ions with large atomic numbers tend to form planar structures with large dihedral angles with DGA ligands.展开更多
Reconnection electric field is a key element of magnetic reconnection.It quantifies the change of magnetic topology and the dissipation of magnetic energy.In this work,two-dimensional(2D)particle-in-cell(PIC)simulatio...Reconnection electric field is a key element of magnetic reconnection.It quantifies the change of magnetic topology and the dissipation of magnetic energy.In this work,two-dimensional(2D)particle-in-cell(PIC)simulations are performed to study the growth of the reconnection electric field in the electron diffusion region(EDR)during magnetic reconnection with a guide field.At first,a seed electric field is produced due to the excitation of the tearing-mode instability.Then,the reconnection electric field in the EDR,which is dominated by the electron pressure tensor term,suffers a spontaneous growth stage and grows exponentially until it saturates.A theoretical model is also proposed to explain such a kind of growth.The reconnection electric field in the EDR is found to be directly proportional to the electron outflow speed.The time derivative of electron outflow speed is proportional to the reconnection electric field in the EDR because the outflow is formed after the inflow electrons are accelerated by the reconnection electric field in the EDR and then directed away along the outflow direction.This kind of reinforcing process at last leads to the exponential growth of the reconnection electric field in the EDR.展开更多
文摘BACKGROUND Orthopaedic surgical education has traditionally depended on the apprenticeship model of“see one,do one,teach one”.However,reduced operative exposure,stricter work-hour regulations,medicolegal constraints,and patient safety concerns have constrained its practicality.Simulation-based training has become a reliable,safe,and cost-efficient alternative.Dry lab techniques,especially virtual and augmented reality,make up 78%of current dry lab research,whereas wet labs still set the standard for anatomical realism.AIM To evaluate the effectiveness,limitations,and future directions of wet and dry lab simulation in orthopaedic training.METHODS A scoping review was carried out across four databases-PubMed,Cochrane Library,Web of Science,and EBSCOhost-up to 2025.Medical Subject Headings included:"Orthopaedic Education","Wet Lab","Dry Lab","Simulation Training","Virtual Reality",and"Surgical Procedure".Eligible studies focused on orthopaedic or spinal surgical education,employed wet or dry lab techniques,and assessed training effectiveness.Exclusion criteria consisted of non-English publications,abstracts only,non-orthopaedic research,and studies unrelated to simulation.Two reviewers independently screened titles,abstracts,and full texts,resolving discrepancies with a third reviewer.RESULTS From 1851 records,101 studies met inclusion:78 on dry labs,7 on wet labs,4 on both.Virtual reality(VR)simulations were most common,with AI increasingly used for feedback and assessment.Cadaveric training remains the gold standard for accuracy and tactile feedback,while dry labs-especially VR-offer scalability,lower cost(40%-60%savings in five studies),and accessibility for novices.Senior residents prefer wet labs for complex tasks;juniors favour dry labs for basics.Challenges include limited transferability data,lack of standard outcome metrics,and ethical concerns about cadaver use and AI assessment.CONCLUSION Wet and dry labs each have unique strengths in orthopaedic training.A hybrid approach combining both,supported by standardised assessments and outcome studies,is most effective.Future efforts should aim for uniform reporting,integrating new technologies,and policy support for hybrid curricula to enhance skills and patient care.
基金supported by the National Key R&D Program of China[grant number 2023YFC3008004]。
文摘This study introduces a new ocean surface friction velocity scheme and a modified Thompson cloud microphysics parameterization scheme into the CMA-TYM model.The impact of these two parameterization schemes on the prediction of the movement track and intensity of Typhoon Kompasu in 2021 is examined.Additionally,the possible reasons for their effects on tropical cyclone(TC)intensity prediction are analyzed.Statistical results show that both parameterization schemes improve the predictions of Typhoon Kompasu’s track and intensity.The influence on track prediction becomes evident after 60 h of model integration,while the significant positive impact on intensity prediction is observed after 66 h.Further analysis reveals that these two schemes affect the timing and magnitude of extreme TC intensity values by influencing the evolution of the TC’s warm-core structure.
基金Supported by the National Natural Science Foundation of China under Grant No.51975138the High-Tech Ship Scientific Research Project from the Ministry of Industry and Information Technology under Grant No.CJ05N20the National Defense Basic Research Project under Grant No.JCKY2023604C006.
文摘Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.
文摘Analysis of the environmental and economic performance of fishing vessels has received limited attention compared with other ship types despite their notable contribution to global greenhouse gas(GHG)emissions.This study evaluates the carbon footprint(CF)and economic viability of a liquefied natural gas(LNG)-fueled fishing vessel,using real engine operation simulations to provide precise and dynamic evaluation of fuel consumption and GHG emissions.Operational profiles are obtained through the utilization of onboard monitoring systems,whereas engine performance is simulated using the 1D/0D AVL Boost^(TM)model.Life cycle assessment(LCA)is conducted to quantify the environmental impact,whereas life cycle cost assessment(LCCA)is performed to analyze the profitability of LNG as an alternative fuel.The potential impact of the future fuel price uncertainties is addressed using Monte Carlo simulations.The LCA findings indicate that LNG has the potential to reduce the CF of the vessel by 14%to 16%,in comparison to a diesel power system configuration that serves as the baseline scenario.The LCCA results further indicate that the total cost of an LNG-powered ship is lower by 9.5%-13.8%,depending on the share of LNG and pilot fuels.This finding highlights the potential of LNG to produce considerable environmental benefits while addressing economic challenges under diverse operational and fuel price conditions.
基金supported by the Natural Science Funds for Distinguished Young Scholar (Grant No. 11602110)Jiangsu Province Graduate Research and Practice Innovation Program (No.KY CX180471)。
文摘The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of "ElectriceMagnetic eForce" and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10%. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and obtained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.
基金supported by the National Natural Science Foundation of China(Grant Nos.51504251,51404263)the National Natural Science Foundation of Jiangsu of China(Nos.BK20140187,BK20130203)+4 种基金the Fundamental Research Funds for the Central Universities(2015QNB01)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)the Central Universities Special Funds for Fundamental Research Funds of the China University of Mining and Technology(No.2014ZDPY04)the Innovation Team of CUMT(2014QN001)the Natural Science Foundation of Jiangsu Province(No.BK2012571)
文摘The personnel in refuge chamber absorb O_2 and exhale CO_2 all the time. Supplying O_2 and removing CO_2 are the basic function of refuge chamber. After disaster occurs, the supply of the compressed air or oxygen for personnel in refuge chamber is limited. Thus, how to effectively use the compressed air and oxygen and try to improve the time of supply has a great significance. Supplying more oxygen will result in waste, while supplying less oxygen will cause its concentration to be lower, and harm life safety. This research uses the theoretical calculation and numerical simulation, finds critical gas supply for refuge chamber, and illuminates the change law of gas concentration with critical gas supply in refuge chamber,which provides theoretical guidance for effective use of compressed air and oxygen in refuge chamber.
文摘Mass attenuation coefficients, effective atomic numbers, effective electron densities and Kerma relative to air for adipose, muscle and bone tissues have been investigated in the photon energy region from 20 keV up to 50 MeV with Geant4 simulation package and theoretical calculations. Based on Geant4 results of the mass attenuation coefficients, the effective atomic numbers for the tissue models have been calculated. The calculation results have been compared with the values of the Auto-Zeff program and with other studies available in the literature. Moreover, Kerma of studied tissues relative to air has been determined and found to be dependent on the absorption edges of the tissue constituent elements.
基金supported by National Natural Science Foundation of China (Grant No. 50775035)New Doctor Teacher Foundation of Southeast University of China (Grant No. 9202000024)
文摘The accurate measurement of the fill level in the ball mill has not been resolved because of the interplay of many variable factors, which led the mill to be operated under the uneconomical condition and lost a lot of energy. At present, some methods, such as vibration method and acoustic method, have been applied for measuring the fill level by the researchers. Aiming at the problem of the traditional methods for measuring the fill level, that is, the feature variables of the fill level suffer the influences of the ball load and the water content of the coal, a novel method to measure the fill level is proposed and a possible relation between the fill level and the angular position of the maximum vibration point on the mill shell is investigated. The angular positions of the maximum vibration point on the mill shell for different fill level cases are calculated theoretically under two assumptions, respectively. Meanwhile the charge motions of the mill for different fill level cases are simulated with the discrete element method （DEM）. And the simulation results are verified by comparing the motion trajectories of steel balls and power draft of the mill. The simulated movement trajectories of the outmost layer steel balls in the mill are monitored and analyzed to obtain the angular positions of the maximum vibration point on the mill shell. Both the results of the theoretical calculation and the 3D DEM simulation show that the position of the maximum vibration point on the mill shell moves to a lower angular positions as the fill level decreasing, which provides a new idea for measuring the filllevel accurately.
文摘Simulation law and physical simulation were used to study the kinematic behavior of inclusions in electromagnetic separation. It was found that velocity of spherical non metallic particles shares different functions in different Reynolds number range. The function of spherical particle’s velocity has been got by confirming the relationship between Reynolds number and resistance coefficient when Reynolds number is 0.2 ～10. For non spherical particles, the moving behavior is influenced by shape and orientation while spherical coefficient has nothing to do with the velocity of irregular particles. The influence of orientation of cuboid particle on the electromagnetic expulsive force has been indicated by numerical computation. [
基金Project supported by the National Natural Science Foundation of China (Grant No 60578015)the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No 20050288025)the Foundation of the Ministry of Education of China for Outstanding Young Teachers in University (2003-2008)
文摘A plasma is produced in air by using a high-intensity Q-switch Nd：YAG pulsed laser to irradiate a solid target, and the impulses delivering from the plasma to the target are measured at different laser power densities. Analysing the formation process of laser plasma and the laser supported detonation wave （LSDW） and using fluid mechanics theory and Pirri＇s methods, an approximately theoretical solution of the impulse delivering from the plasma to the target under our experimental condition is found. Furthermore, according to the formation time of plasma and the variation of pressure in plasma in a non-equilibrium state, a physical model of the interaction between the pulse laser and the solid target is developed. The plasma evolutions with time during and after the laser pulse irradiating the target are simulated numerically by using a three-dimensional difference scheme. And the numerical solutions of the impulse delivering from the plasma to the target are obtained. A comparison among the theoretical, numerical and experimental results and their analyses are performed. The experimental results are explained reasonably. The consistency between numerical results and experimental results implies that the numerical calculation model used in this paper can well describe the mechanical action of the laser on the target.
基金This project is supported by Provincial Natural Science Foundation of Heilongjiang(No.A9809).
文摘A method for determination of tool-chip contact length is theoreticallypresented in orthogonal metal machining. By using computer simulation and based on the analyses ofthe elastro-plastic deformation with lagrangian finite element method in the deformation zone, theaccumulated representative length of the low layer, the tool-chip contact length of the chipcontacting the tool rake are calculated, experimental studies are also carried out with 0.2 percentcarbon steel. It is shown that the tool-chip contact lengths obtained from computer simulation havea good agreement with those of measured values.
文摘The structure of cylindrical tri-sine oscillating tooth gear drive is presented. Based on the space meshing theory, equations of meshing and tooth profile are established and its meshing theory is studied. Using Pro/E, this system is modeled and simulated,which is compared with the above-established equations.
文摘Ti0.5Al0.25Ni0.25 alloy prepared by vacuum induction melting was studied.The phase composition was analyzed with X-ray technique and EDS analysis,and its electrochemical properties were investigated at various temperatures.Electrochemical reaction kinetic parameters were also studied with proper electrochemical techniques.The influence of the secondary corrosion reaction on the anodic linear polarization measurement was also analyzed by theoretical simulation.The results show that,proper ball-milling with nickel powders is beneficial to electrochemical performance.The theoretical simulation proves that,the existence of the side reaction can disturb the measurement of electrochemical reaction kinetic parameters.
基金Project(DYXM-115-04-02-01) supported by the National Deep-sea Technology Project of Development and Research, ChinaProject(2011QNZT058) supported by the Fundamental Research Funds for the Central Universities, ChinaProject(51105386) supported by the National Natural Science Foundation of China
文摘With comprehensive considerations of the operational safety and collection efficiency for the tracked miner collecting the seafloor poly-metallic nodules, two new improved mining paths for the miner on the deep seafloor were proposed. Compared to the conventional mining path, the design principles and superiorities of the two new paths are that the miner turning with relative long radius should avoid large sinkage and high slip, so as to ensure its operational safety, while the space between its straight-line trajectories before and after the turning is optimum, which is designed as the total width of the miner, and collect nodules as more as possible, so as to ensure its collection efficiency. To realize the new mining paths, theoretical designs and quantitative calculations were carried out to determine the exact positions for the speed controls of the miner during its whole operation process. With the new dynamic model of the miner, and through regulations of the speeds of the left and right tracks of the miner on the exact motion positions according to the theoretical calculations, the two new improved mining paths for the miner on the seafloor were successfully simulated, thus the turning radius of the miner in the simulation is about 21.8 m, while the distance between the straight-line trajectories before and after the turning is about 5.2 m. The dynamic simulation results preliminarily prove the feasibility of these two new mining paths, and further can provide important theoretical guidance and useful technical reference for the practical tracked miner operation and control on the seafloor.
基金supported by Jiangsu Province Health Vocational and Technical Education Research Grants Program(No.201402)Jiangsu Province College“Qing Lan Project”[Su Teacher No.2014(23)]The Science and Technology Innovation Team Project of Suzhou Health College(No.szwzytd 201304)
文摘Objective： To investigate the effectiveness of a high-fidelity teaching simulation based on an NLN/Jeffries simulation in the nursing education theoretical framework and its influencing factors. Methods： A high-fidelity teaching simulation on clinical nursing practices using intelligent human analogues was conducted with 200 students, and The Simulation Design Scale, and the Student Satisfaction and Self-Confidence in Learning Scale developed by the National League for Nursing were used to evaluate the training effectiveness and its influencing factors. Results： For the high-fidelity teaching simulation, students gave scores of 4.36± 0.54 points for satisfaction and 4.33 ± 0.46 points for Self-Confidence. The students highly rated the five dimensions of teaching design, i.e., teaching objectives/information, assistance/support for students, problem solving, guided feedback, and fidelity. The teaching design was closely correlated with the satisfaction of the high-fidelity teaching simulation and self-efficacy, and the dimensions of teaching objectives/informa- tion and assistance/support for students were particularly strong predictors of teaching effectiveness. Conclusions： A high-fidelity teaching simulation based on Jeffries＇ theoretical framework improved student satisfaction with the simulation and their Self-Confidence. In planning simulations, teachers should take into account five characteristics, i.e., teaching objectives/information on simulation education, assistance/support for students, problem solving, guided reflection, and fidelity, to achieve better teaching effectiveness.
基金National Natural Science Foundation of China under Grant Nos.51725901 and 51639006。
文摘This paper aims to investigate the critical stability of a multi-degree-of-freedom(multi-DOF)real-time hybrid simulation(RTHS).First,the critical time-delay analysis models are developed using the continuous-and discrete-time root locus(RL)techniques,respectively.A bilinear transform is introduced into the first-order Padéapproximation while conducting the discrete RL analysis.Based on this technique,the time delay can be explicitly used as the gain factor and thus the instability mechanism of the multi-DOF RTHS system can be analyzed.Subsequently,the critical time delays calculated by the continuous-and discrete-time RL techniques,respectively,are compared for a 2-DOF RTHS system.It is shown that assuming the RTHS system to be a continuous-time system will result in overestimating the critical time delay.Finally,theoretically calculated critical delays are demonstrated and validated by numerical simulation and a set of RTHS experiments.Parametric analysis provides a glimpse of the effects of time step,frequency and damping ratio in a performing partitioning scheme.The constructed analysis model proves to be useful for evaluating the critical time delay to predict stability and performance,therefore facilitating successful RTHS.
基金supported by the National Key Research Project(No.2016YFB0300901)。
文摘The power law model is the most widely used model for the rheological behavior of semi-solid metals(SSMs)in the numerical simulation of semi-solid processing.However,it is still not known why the anomalous negative flow exponent exists in the power law model for SSMs and its influence on the simulation.In this research,the rheological behavior of semi-solid Al-7Si-0.3Mg aluminum alloy is experimentally studied followed by modeling.The power law model fitting results show flow curves deviate from the experimental data and negative flow exponents,which are physically nonsensical and inapplicable to the simulation of SSMs flow proved by hydrodynamic analysis.This drawback of the power law model stems from neglecting the yield stress of SSMs.By contrast,the model referring Herschel-Bulkley(HB)theory which takes yield stress into consideration has reasonable flow exponent and yields good agreement between the fitting and experimental results.Furthermore,the simulation of die filling process is conducted,suggesting that the power law model over-optimistically predicts the tendency of blistering and misrun defects at low temperature and high filling velocity during semi-solid processing.
基金Project supported by the National Natural Science Foundation of China(21876062)。
文摘Diglycolamides(DGAs) show excellent application prospects for the extraction and separation of rare earth metals from highly radioactive liquid wastes and rare earth ores.The extraction ability of DGAs for rare earth ions in nitrate or chloride media increases with increasing atomic number of the rare earth metal.To understand the origin of this phenomenon,three binuclear crystals [Ln(TEDGA)_(3)][Ln(NO_(3))_(6)] of N,N,N’,N’-tetraethyldiglycolamide(TEDGA) with rare earth ions La(Ⅲ),Pr(Ⅲ) and Eu(III) were prepared and characterized crystallographically.The three complexes belong to the triclinic crystal system,P-1 space group.The bond lengths of Ln-O_(amide) are significantly shorter than those of Ln-O_(ether) in the same crystal.The Ln-O_(amide) and Ln-O_(enher) bond lengths gradually decrease with increasing atomic number of the rare earth ion.The dihedral angle formed by TEDGA and metal ions through the tridentate coordination gradually increases with increasing metal ion atomic number,tending toward the formation of sizeable planar coordination structures for the most massive rare earth ions.The structures of the compounds formed by the extractant and metal ion were optimized by means of DFT simulations.We find that the interaction between TEDGA and the rare earth ion is dominated by electrostatic interaction by analyzing binding energy,WBIs,Mulliken charge,natural electron configurations,and molecular orbital interaction.The covalent component of the Ln-O bonds of the complexes increases with increasing metal atomic number.The observed increase in extraction and separation capacity of diglycolamides for rare earth ions with increasing atomic number might be due to the formation of two fivemember rings by one tridentate ligand.The rare earth ions with large atomic numbers tend to form planar structures with large dihedral angles with DGA ligands.
基金Project supported by the National Natural Science of China(Grant Nos.41527804 and 41774169)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB 41000000)the Key Research Program of Frontier Sciences of the Chinese Academy of Sciences(Grant No.QYZDJSSW-DQC010).
文摘Reconnection electric field is a key element of magnetic reconnection.It quantifies the change of magnetic topology and the dissipation of magnetic energy.In this work,two-dimensional(2D)particle-in-cell(PIC)simulations are performed to study the growth of the reconnection electric field in the electron diffusion region(EDR)during magnetic reconnection with a guide field.At first,a seed electric field is produced due to the excitation of the tearing-mode instability.Then,the reconnection electric field in the EDR,which is dominated by the electron pressure tensor term,suffers a spontaneous growth stage and grows exponentially until it saturates.A theoretical model is also proposed to explain such a kind of growth.The reconnection electric field in the EDR is found to be directly proportional to the electron outflow speed.The time derivative of electron outflow speed is proportional to the reconnection electric field in the EDR because the outflow is formed after the inflow electrons are accelerated by the reconnection electric field in the EDR and then directed away along the outflow direction.This kind of reinforcing process at last leads to the exponential growth of the reconnection electric field in the EDR.
