Efficient tool condition monitoring techniques help to realize intelligent management of tool life and reduce tool usage costs.In this paper,the influence of different wear degrees of ball-end milling cutters on the t...Efficient tool condition monitoring techniques help to realize intelligent management of tool life and reduce tool usage costs.In this paper,the influence of different wear degrees of ball-end milling cutters on the texture shape of machining tool marks is investigated,and a method is proposed for predicting the wear state(including the position and degree of tool wear)of ball-end milling cutters based on entropy measurement of tool mark texture images.Firstly,data samples are prepared through wear experiments,and the change law of the tool mark texture shape with the tool wear state is analyzed.Then,a two-dimensional sample entropy algorithm is developed to quantify the texture morphology.Finally,the processing parameters and tool attitude are integrated into the prediction process to predict the wear value and wear position of the ball end milling cutter.After testing,the correlation between the predicted value and the standard value of the proposed tool condition monitoring method reaches 95.32%,and the accuracy reaches 82.73%,indicating that the proposed method meets the requirement of tool condition monitoring.展开更多
The textures and microstructures of hot-and cold-rolled sheets of an AA 5454 aluminium alloy were studied,with special attention paid to comparing the texture development for the symmetric and asymmetric cold rolling....The textures and microstructures of hot-and cold-rolled sheets of an AA 5454 aluminium alloy were studied,with special attention paid to comparing the texture development for the symmetric and asymmetric cold rolling.Scanning electron microscopy with electron-backscatter diffraction was used to monitor the development of the microstructure in the differently deformed and additionally annealed samples.Details of the formations and transformations of individual texture components occurring during the rolling processes were observed and discussed.The average grain sizes,textures and mechanical properties were correlated and explained for the symmetric and asymmetric cold-rolled samples.The asymmetric rolling is beneficial in terms of deep drawability because it reduces the planar anisotropy of the annealed material due to the decrease of the Cube,Goss,rotated-Cube and η-fibre texture components and at the same time strengthens X1-and X2-fibre texture components which are shear texture components and improve deep drawability.During the asymmetric cold rolling,the temperature increases due to friction,triggering recrystallisation processes and leading to larger grains.It is also confirmed that asymmetric cold rolling uses less rolling force and consequently less energy to produce a final material with better formability,particularly earing.展开更多
Hot deformation with high strain rate has been paid more attention due to its high efficiency and low cost,however,the strain rate dependent dynamic recrystallization(DRX)and texture evolution in hot deformation proce...Hot deformation with high strain rate has been paid more attention due to its high efficiency and low cost,however,the strain rate dependent dynamic recrystallization(DRX)and texture evolution in hot deformation process,which affect the formability of metals,are lack of study.In this work,the DRX behavior and texture evolution of Mg-8Gd-1Er-0.5Zr alloy hot compressed with strain rates of 0.1 s^(−1),1 s^(−1),10 s^(−1) and 50 s^(−1) are studied,and the corresponding dominant mechanisms for DRX and texture weakening are discussed.Results indicated the DRX fraction was 20%and the whole texture intensity was 16.89 MRD when the strain rate was 0.1 s^(−1),but they were 76%and 6.55 MRD,respectively,when the strain rate increased to 50 s^(−1).The increment of DRX fraction is suggested to result from the reduced DRX critical strain and the increased dislocation density as well as velocity,while the weakened whole texture is attributed to the increased DRX grains.At the low strain rate of 0.1 s^(−1),discontinuous DRX(DDRX)was the dominant,but the whole texture was controlled by the deformed grains with the preferred orientation of{0001}⊥CD,because the number of DDRX grains was limited.At the high strain rate of 50 s^(−1),continuous DRX(CDRX)and twin-induced DRX(TDRX)were promoted,and more DRX grains resulted in orientation randomization.The whole texture was mainly weakened by CDRX and TDRX grains,in which CDRX plays a major role.The results of present work are significant for understanding the hot workability of Mg-RE alloys with a high strain rate.展开更多
Conventional rolled Mg-Al alloy sheets typically exhibit strong basal textures that remain and may even strengthen after recrystallization annealing due to the preferential growth of basal-oriented grains,resulting in...Conventional rolled Mg-Al alloy sheets typically exhibit strong basal textures that remain and may even strengthen after recrystallization annealing due to the preferential growth of basal-oriented grains,resulting in poor formability at room temperature.Therefore,the knowledge of recrystallization and grain growth is critical for modifying textures of Mg-Al alloy sheets.The static recrystallization and texture evolution in a cold-rolled dilute Mg-1Al(wt.%)alloy during various annealed temperatures ranging from 300℃ to 450℃,have been investigated using the quasi in-situ electron backscatter diffraction(EBSD)method.The as-rolled Mg-1Al alloy shows a dominant basal texture,which weakens and broadens in the rolling direction(RD)during the subsequent annealing,accompanied by the formation of{1010}texture component.Particularly,the {1010} texture component is more pronounced after annealing at high temperatures.The quasi in-situ EBSD results show that recrystallized grains are mainly induced by shear bands,which exhibit a wide spectrum of orientations with c-axis tilt angles ranging 20°-45°from the normal direction(ND).Orientations of shear band-induced recrystallized grains are retained during the entire recrystallization process,resulting in a reduction in the texture intensity.Moreover,recrystallized grains belonging to the {1010}texture component grow preferentially compared to those with other orientations,which is attributed to low energy grain boundaries,especially grain boundaries with∼30°misorientation angles.Furthermore,the high temperature annealing facilitates the rapid growth of grain boundaries having a 30°misorientation angle,leading to the occurrence of distinct {1010} texture after annealing at 450℃ for 1 h.The results provide insights for texture modification of rare earth-free low-alloyed Mg alloys by controlling annealing parameters.展开更多
Ecological monitoring vehicles are equipped with a range of sensors and monitoring devices designed to gather data on ecological and environmental factors.These vehicles are crucial in various fields,including environ...Ecological monitoring vehicles are equipped with a range of sensors and monitoring devices designed to gather data on ecological and environmental factors.These vehicles are crucial in various fields,including environmental science research,ecological and environmental monitoring projects,disaster response,and emergency management.A key method employed in these vehicles for achieving high-precision positioning is LiDAR(lightlaser detection and ranging)-Visual Simultaneous Localization and Mapping(SLAM).However,maintaining highprecision localization in complex scenarios,such as degraded environments or when dynamic objects are present,remains a significant challenge.To address this issue,we integrate both semantic and texture information from LiDAR and cameras to enhance the robustness and efficiency of data registration.Specifically,semantic information simplifies the modeling of scene elements,reducing the reliance on dense point clouds,which can be less efficient.Meanwhile,visual texture information complements LiDAR-Visual localization by providing additional contextual details.By incorporating semantic and texture details frompaired images and point clouds,we significantly improve the quality of data association,thereby increasing the success rate of localization.This approach not only enhances the operational capabilities of ecological monitoring vehicles in complex environments but also contributes to improving the overall efficiency and effectiveness of ecological monitoring and environmental protection efforts.展开更多
Impact of texture type on the magnetic properties of ultrahigh density perpendicular magnetic recording media L1_(0)-FePt thin film was investigated,so were the texture formation and evolution mechanism.Reuss,Voigt,an...Impact of texture type on the magnetic properties of ultrahigh density perpendicular magnetic recording media L1_(0)-FePt thin film was investigated,so were the texture formation and evolution mechanism.Reuss,Voigt,and Hill models were used to determine the anisotropic elastic modulus of L1_(0)-FePt thin film with fiber texture.Then,the elastic strain energies of thin films under various stress conditions were calculated.Results reveal that the stress condition has a significant influence on the fiber texture evolution.When the L1_(0)-FePt thin film is subjected to compressive in-plane strain prior to ordering phase transformation,the formation of{100}fiber texture is promoted.On the contrary,the ordering phase transformation under tensile in-plane strain promotes the{001}fiber texture formation.展开更多
In this work,a good balance of strength and ductility(a yield strength of 185 MPa and a uniform elongation of 20%)has been obtained in a dilute Mg-1.8Zn-0.3Y-0.3Ca-0.3Zr(wt.%)alloy using hard plate rolling(HPR)followe...In this work,a good balance of strength and ductility(a yield strength of 185 MPa and a uniform elongation of 20%)has been obtained in a dilute Mg-1.8Zn-0.3Y-0.3Ca-0.3Zr(wt.%)alloy using hard plate rolling(HPR)followed by annealing,with a low anisotropy in mechanical properties.More importantly,the HPR-annealed alloy shows an excellent formability at the same time,i.e.,the index Erichsen(I.E.)value reaches 7.9 mm(the Erichsen cupping test)at room temperature,which is higher compared with the Mg-1.8Zn-0.3Y-0.3Ca0.3Zr alloy produced by conventional multi-pass rolling(CR)followed by annealing.The excellent synergy of strength and formability of the HPR-annealed alloy is mainly attributed to a weak elliptical ring texture,as well as finer and denser Zn_(2)Zr_(3)precipitates.The formation of weak elliptical ring texture is related to the preferential co-segregation of Zn and Ca elements at boundaries of basal grains with smal misorientation angles during annealing,which inhibits the growth of basal grains and promotes the preferential growth of non-basal grains At the same time,in comparison with the CR-annealed alloy,the HPR-annealed alloy contains finer and denser Zn_(2)Zr_(3)precipitates that ar less likely to become sources of cracks,leading to the higher strength and formability of the HPR-annealed alloy.The results in this work can provide reference for the development of high strength Mg alloy sheets with excellent room temperature formability,which also shed light on mitigating planar anisotropy in mechanical properties for Mg alloy sheets.展开更多
Molecular dynamics(MD)simulation is employed to investigate the deformation behavior under various loading paths and strain rates of nanocrystalline magnesium(NC Mg)with[0001]texture.Atomic-scale structural evolution ...Molecular dynamics(MD)simulation is employed to investigate the deformation behavior under various loading paths and strain rates of nanocrystalline magnesium(NC Mg)with[0001]texture.Atomic-scale structural evolution of NC Mg was performed under uniaxial and biaxial loadings.In tension process,compression twins and basal slip dominate,while the compression process is dominated by tension twins.The activation mechanism of twinning is highly sensitive to the loading path and grain orientation.Meanwhile,the effect of strain rate on the structural evolution of NC Mg was investigated.It is found that the effect of strain rate on the plastic deformation of NC Mg is reflected through the plasticity delays and the way to release the stress.As the strain rate decreases,the plastic deformation mechanism gradually changes from intragranular to grain boundary.Some significant potential deformation mechanisms in the loading process were studied.It is observed that{1121}twins nucleated inside the grains,and the thickening process is completed by basal〈a〉slip of the twin boundary.The strain compatibility between twins is automatically optimized with loading.Moreover,the detwinning mechanism caused by the interaction between twins and basal stacking faults is clarified.展开更多
Gallium nitride(GaN),as a third-generation semiconductor,is highly attractive due to its exceptional physical and chemical properties.Laser direct writing offers an efficient method for the precise processing of hard ...Gallium nitride(GaN),as a third-generation semiconductor,is highly attractive due to its exceptional physical and chemical properties.Laser direct writing offers an efficient method for the precise processing of hard and brittle materials.In this work,various types of surface microtexture were processed on GaN epilayers using a femtosecond laser with a wavelength of 1030 nm.The effects of the laser energy,singlepulse interval,number of pulses,and number of scan passes on groove machining were investigated with a view to achieving high-quality micromachining.The depth,width,surface morphology,and roughness of the grooves were analyzed using scanning electron microscopy,laser scanning confocal microscopy,and atomic force microscopy.Damage and stress were characterized at the microscale using Raman spectroscopy.High-quality precision machining of different types of periodic surface microtexture at 40 mW laser power was achieved by controlling the process parameters and laser trajectory.Finally,an initial exploration was conducted to examine vector-light-based microand nanostructure processing.The findings demonstrate the potential of femtosecond lasers for efficient micromachining of hard and brittle materials without the creation of heat-affected zones or microcracks.The high-quality textured structures achieved through this processing technique have broad and promising applications in optoelectronic devices and tribology.展开更多
The microstructure and texture evolution of Mg-xAl-1Zn-1Y-0.1Mn alloys are systematically analyzed.There is no effect of Al addition on grain refinement in the Mg-1Zn-1Y-0.1Mn alloy,but the addition of 0.5 wt.%or more...The microstructure and texture evolution of Mg-xAl-1Zn-1Y-0.1Mn alloys are systematically analyzed.There is no effect of Al addition on grain refinement in the Mg-1Zn-1Y-0.1Mn alloy,but the addition of 0.5 wt.%or more Al element dramatically changes texture from a weak texture to a strong basal texture.The predominant second phase particle of Mg_(3)Zn_(3)Y_(2) phase in the Mg-1Zn-1Y-0.1Mn alloy changes to Al_(2)Y phase by the addition of only 0.1 wt.%Al element,and the concentrations of dissolved Y element in the 0Al,0.1Al,0.3Al,0.5Al and 1Al alloys are 0.50,0.31,0.23,0.15 and 0.06 wt.%,respectively.Although the 0.5 wt.%or more Al-added alloys have higher Schmid factor for prismatic(a)slip than the 0.3 wt.%or less Al-added alloys,the lower Al containing alloys show much higher activity of prismatic (a)slip than the higher Al containing alloys.It demonstrates that the addition of high amount of Al element in Mg-Zn-RE alloy dramatically decrease the dissolved Y element,resulting in a significant deterioration of activity of prismaticslip and consequently a poor formability at room temperature.展开更多
Early detection of convective clouds is vital for minimizing hazardous impacts.Forecasting convective initiation(CI)using current multispectral geostationary meteorological satellites is often challenged by high false...Early detection of convective clouds is vital for minimizing hazardous impacts.Forecasting convective initiation(CI)using current multispectral geostationary meteorological satellites is often challenged by high false-alarm rates and missed detections caused by limited resolution.In contrast,high-resolution earth observation satellites offer more detailed texture information,improving early detection capabilities.The authors propose a novel methodology that integrates the advanced features of China’s latest-generation satellites,Gaofen-4(GF-4)and Fengyun-4A(FY-4A).This fusion method retains GF’s high-resolution details and FY-4A’s multispectral information.Two cases from different observational scenarios and weather conditions under GF-4’s staring mode were carried out to compare the CI forecast results based on fused data and solely on FY-4A data.The fused data demonstrated superior performance in detecting smaller-scale convective clouds,enabling earlier forecasting with a lead time of 15–30 minutes,and more accurate location identification.Integrating high-resolution earth observation satellites into early convective cloud detection provides valuable insights for forecasters and decision-makers,particularly given the current resolution limitations of geostationary meteorological satellites.展开更多
This work managed the extrusion strain path by designing various extrusion die cavities,successfully realizing the texture modification for the ZK60 magnesium alloy.The mechanisms involving the texture dependence on t...This work managed the extrusion strain path by designing various extrusion die cavities,successfully realizing the texture modification for the ZK60 magnesium alloy.The mechanisms involving the texture dependence on the extrusion die cavity as well as their effects on the mechanical properties were emphatically investigated.Results showed that dynamic recrystallization refined the grain size and improved the microstructure homogeneity in the three extrusion specimens,but did not produce too large microstructure differences.By comparison,significant texture differences developed owing to the various extrusion die cavities,which here were mainly reflected in the strong or weak texture components for the c-axes//TD and the c-axes//ND.Such texture differences started from the deformation texture instead of the recrystallization texture whose roles only consisted in dispersing the texture component and reducing the texture intensity.The results from the finite element analysis and the visco-plastic self-consistent model indicated that,in order to accommodate the different strain components induced by the extrusion die cavities,slip systems or tension twinning were activated differently,and this was the critical reason causing the above texture differences.One modified Hall-Petch relationship was adopted to analyze the conjoint effects of grain refinement and texture variation on the yield stress.Additionally,the quantitative results about deformation mechanism activation fractions demonstrated that the texture variations influenced the competition relationships between the twinning induced deformation and the slip dominant deformation,and the former generally produced the lower yield stress and the increasing stage of strain hardening rate,while the latter produced the higher yield stress and the continuous decline of strain hardening rate.展开更多
The tension-compression asymmetry presents notable challenges for the application of magnesium alloys in many fields.In this study,the solid-solution treated Mg-8.5Gd-4.5Y-0.8Zn-0.4Zr alloy's tension-compression a...The tension-compression asymmetry presents notable challenges for the application of magnesium alloys in many fields.In this study,the solid-solution treated Mg-8.5Gd-4.5Y-0.8Zn-0.4Zr alloy's tension-compression asymmetry was examined using optical microscope(OM),x-ray diffraction(XRD),viscoplastic self-consistent(VPSC)modeling,and electron backscatter diffraction(EBSD).The VPSC hardening parameters were significantly adjusted based on the Schmid factor of deformation modes in rare earth magnesium(Mg-RE)alloy,which came from the EBSD data.Excellent agreement was found between the modified VPSC model's calculation results,especially the stress-strain curves and pole figures.The alloy exhibited good strength with a negligible tension-compression asymmetry and an impressive 0.98 ratio of compressive yield strength to tensile yield strength(CYS/TYS).The main cause could be attributed to the unusual texture of(11-20)<0001>in alloy,which eliminated the imbalance in tension and compression deformation by having a negative effect on the activation of{10-12}twinning in tensile and a positive effect in compressive deformation.The activation level of{10-12}twinning was 0.37 and 0.40calculated by VPSC model,in the plastic deformation of tension and compression,respectively;in the tensile and compression samples,the EBSD data indicated that approximately 31.9%and 31.1%(area proportion)of the grains were deformed with twins,respectively.Both tension and compression deformation showed the{10-12}twinning in the early stage of deformation,which transformed to{11-22}twinning in the later stage.The considerable activation of pyramidal during the later stages of deformation endowed the alloy with good ductility.展开更多
Traditional symmetrical rolling often induces through-thickness gradient microstructures and textures.In this study,ultra-high purity(99.999 wt.%)tantalum(Ta)served as a model material to address the texture gradient ...Traditional symmetrical rolling often induces through-thickness gradient microstructures and textures.In this study,ultra-high purity(99.999 wt.%)tantalum(Ta)served as a model material to address the texture gradient issue by employing dynamic offsets and shear force adjustment rolling(DS rolling)as an advanced rolling technique.The strain and stress distributions in Ta plates for DS rolling and symmetrical rolling processes were analyzed using Deform 3D software.Through-thickness textures and microstructures were characterized via electron backscatter diffraction.The results revealed that DS rolling effectively solved the problem of texture gradient by increasing the average shear strain from 0.05 to 0.56.In turn,the shear stress reduced the energy storage orientation dependence of{100}and{111}grains.Furthermore,DS rolling refined the recrystallized grains on an average of 30.9%.展开更多
The ultrafine copper wire with a diameter of 18μm is prepared via cold drawing process from the single crystal downcast billet(Φ8 mm),taking a drawing strain to 12.19.In this paper,in-depth investigation of the micr...The ultrafine copper wire with a diameter of 18μm is prepared via cold drawing process from the single crystal downcast billet(Φ8 mm),taking a drawing strain to 12.19.In this paper,in-depth investigation of the microstructure feature,texture evolution,mechanical properties,and electrical conductivity of ultrafine wires ranging fromΦ361μm toΦ18μm is performed.Specially,the microstructure feature and texture type covering the whole longitudinal section of ultrafine wires are elaborately characterized.The results show that the average lamella thickness decreases from 1.63μm to 102 nm during the drawing process.Whereas,inhomogeneous texture evolution across different wire sections was observed.The main texture types of copper wires are comprised of<111>,<001>and<112>orientations.Specifically,the peripheral region is primarily dominated by<111>and<112>,while the central region is dominated by<001>and<111>.As the drawing strain increases,the volume fraction of hard orientation<111>with low Schmid factor increases,where notably higher fraction of<111>is resulted from the consumption of<112>and<001>for the wire ofΦ18μm.For drawn copper wire of 18μm,superior properties are obtained with a tensile strength of 729.8 MPa and an electrical conductivity of 86.9%IACS.Furthermore,it is found that grain strengthening,dislocation strengthening,and texture strengthening are three primary strengthening mechanisms of drawn copper wire,while the dislocation density is the main factor on the reducing of conductivity.展开更多
The evolution of microstructure and texture in Mg-3Al-1Zn-1Ca alloy sheets subjected to in-plane shear(IPS)loading was investigated using experimental techniques and viscoplastic self-consistent(VPSC)modeling.The spec...The evolution of microstructure and texture in Mg-3Al-1Zn-1Ca alloy sheets subjected to in-plane shear(IPS)loading was investigated using experimental techniques and viscoplastic self-consistent(VPSC)modeling.The specimens were deformed under varying degrees of IPS strain(γ12=0.05,0.10,and 0.15)using a customized jig.Electron backscatter diffraction(EBSD)observations revealed profuse tensile twinning(TTW)even at an IPS strain of 0.05,with its intensity continuously increased as the IPS strain increased.The TTWs progressively engulfed parent grains with increasing shear strain,evolving into an unusual deformation twin morphology.Furthermore,VPSC model predictions confirmed basal slip as the dominant deformation mode at low IPS strains,transitioning to prismatic slip dominance at higher IPS strains.The activity of the TTW mode was significantly higher during the initial stages of IPS strain and saturated to lower values at higher strains.VPSC simulation results also indicated preferential shear accumulation on a single twin system,explaining the phenomenon of a single twin variant engulfing a parent grain.Additionally,the influence of individual slip and twin modes on texture evolution was evaluated through orientation tracking of representative grains at various shear strain increments using VPSC simulation.The simulation results quantitatively highlighted the activities of basal slip,prismatic slip,and tensile twinning,establishing a correlation between texture evolution and the underlying deformation mechanisms.展开更多
The work aims to investigate the formation and transformation mechanism of non-basal texture in the extruded Mg alloys.With this purpose a pure Mg as reference and eight Mg-Gd binary alloys with the Gd concentration r...The work aims to investigate the formation and transformation mechanism of non-basal texture in the extruded Mg alloys.With this purpose a pure Mg as reference and eight Mg-Gd binary alloys with the Gd concentration ranging from 0.5 wt.%to 18 wt.%were prepared for extrusion.This study shows that the basal fiber texture in pure Mg transited into RE(rare earth)texture in diluted Mg-Gd alloys and into the abnormal C-texture in high-concentration Mg-Gd alloys.In pure Mg,discontinuous dynamic recrystallization plays a predominant role during the extrusion process,resulting in the formation of a typical basal fiber texture.Alloying with high concentration of Gd impedes the dynamic recrystallization process,facilitating the heterogeneous nucleation of shear bands as well as the dynamic recrystallization within shear bands.Dynamic recrystallized grains within shear bands nucleate with a similar orientation to the host deformed parent grains and gradually tilt their c-axis to the extrusion direction during growth by absorbing dislocations,leading to the formation of either the REtexture orientation or the C-texture orientation,depending on the stored energy within shear bands.The analysis aided by IGMA and TEM characterization reveals that the shear bands originate from the extensive but heterogeneous activation of pyramidal I slip.Tensile tests illustrate a close correlation between the fracture elongation and texture types.A comprehensive understanding of the formation and transformation mechanism of different texture components in Mg alloys holds significant importance for the design of high-performance Mg alloys by texture engineering.展开更多
The deformation behavior of hot-rolled AZ31 magnesium(Mg)alloy sheet was analyzed when subjected to uniaxial tension along its normal direction at temperatures ranging from 100 to 400℃and strain rates ranging from 0....The deformation behavior of hot-rolled AZ31 magnesium(Mg)alloy sheet was analyzed when subjected to uniaxial tension along its normal direction at temperatures ranging from 100 to 400℃and strain rates ranging from 0.5 to 100 mm/min.Based on the stress−strain curves and the dynamic material model,the hot processing map was established,which demonstrates that the power dissipation factor(η)is the most sensitive to strain rate at 400℃via absorption of dislocations.At 400℃,sample at 0.5 mm/min possessesηof 0.89 because of its lower kernel average misorientation(KAM)value of 0.51,while sample at 100 mm/min possessesηof 0.46 with a higher KAM value of 1.147.In addition,the flow stress presents a slight decrease of 25.94 MPa at 10 mm/min compared to that at 100 mm/min and 100℃.The reasons are twofold:a special~34°texture component during 100℃-100 mm/min favoring the activation of basal slip,and dynamic recrystallization(DRX)also providing softening effect to some extent by absorbing dislocations.Difference in activation of basal slip among twin laminas during 100℃-100 mm/min results in deformation inhomogeneity within the grains,which generates stress that helps matrix grains tilt to a direction favorable to basal slip,forming the special~34°texture component.展开更多
It is significant to process textures with special functions similar to animal surfaces based on bionics and improve the friction stability and contact comfort of contact surfaces for the surface texture design of tac...It is significant to process textures with special functions similar to animal surfaces based on bionics and improve the friction stability and contact comfort of contact surfaces for the surface texture design of tactile products.In this paper,a bionic hexagonal micro-convex texture was prepared on an acrylic surface by laser processing.The friction mechanism of a finger touching the bionic hexagonal micro-convex texture under different touch speeds and pressures,and the effect of the height of the texture on tactile perception were investigated by finite element,subjective evaluation,friction,and EEG tests.The results showed that the deformation friction was the main friction component when the finger touched the bionic hexagonal texture,and the slipperiness and friction factor showed a significant negative correlation.As the touch speed decreased or the touch force increased,the hysteresis friction of the fingers as well as the interlocking friction increased,and the slipperiness perception decreased.The bionic hexagonal texture with higher convexity caused a higher friction factor,lower slipperiness perception,and lower P300 peak.Hexagonal textures with lower convexity,lower friction factor,and higher slipperiness perception required greater brain attentional resources and intensity of tactile information processing during tactile perception.展开更多
A grain-oriented silicon steel was normalized with a novel high magnetic field using one-stage cooling process.The effect of high-magnetic-field normalizing on the microstructures and textures was studied with a hot-r...A grain-oriented silicon steel was normalized with a novel high magnetic field using one-stage cooling process.The effect of high-magnetic-field normalizing on the microstructures and textures was studied with a hot-rolled sheet as initial material.It was found that recrystallization and the grain growth were enhanced owing to the external magnetic field driving force.The angle between Goss orientation and magnetic field direction was small,resulting in a high nucleation rate of Goss grains,and hence,the intensity of Goss texture was increased and the deviation angle of Goss grains was reduced after high-magnetic-field normalizing.Furthermore,the migration of dislocation was promoted with an external magnetic field driving force and the density of dislocation decreased,reducing the proportion of low-angle grain boundaries around the Goss grains.The enhancement of recrystallization process and grain growth increased the proportion of high-energy grain boundaries and high-angle grain boundaries,providing a favorable condition for the growth of Goss grains.展开更多
基金Project(51975169)supported by the National Natural Science Foundation of ChinaProject(LH2022E085)supported by the Natural Science Foundation of Heilongjiang Province,China。
文摘Efficient tool condition monitoring techniques help to realize intelligent management of tool life and reduce tool usage costs.In this paper,the influence of different wear degrees of ball-end milling cutters on the texture shape of machining tool marks is investigated,and a method is proposed for predicting the wear state(including the position and degree of tool wear)of ball-end milling cutters based on entropy measurement of tool mark texture images.Firstly,data samples are prepared through wear experiments,and the change law of the tool mark texture shape with the tool wear state is analyzed.Then,a two-dimensional sample entropy algorithm is developed to quantify the texture morphology.Finally,the processing parameters and tool attitude are integrated into the prediction process to predict the wear value and wear position of the ball end milling cutter.After testing,the correlation between the predicted value and the standard value of the proposed tool condition monitoring method reaches 95.32%,and the accuracy reaches 82.73%,indicating that the proposed method meets the requirement of tool condition monitoring.
文摘The textures and microstructures of hot-and cold-rolled sheets of an AA 5454 aluminium alloy were studied,with special attention paid to comparing the texture development for the symmetric and asymmetric cold rolling.Scanning electron microscopy with electron-backscatter diffraction was used to monitor the development of the microstructure in the differently deformed and additionally annealed samples.Details of the formations and transformations of individual texture components occurring during the rolling processes were observed and discussed.The average grain sizes,textures and mechanical properties were correlated and explained for the symmetric and asymmetric cold-rolled samples.The asymmetric rolling is beneficial in terms of deep drawability because it reduces the planar anisotropy of the annealed material due to the decrease of the Cube,Goss,rotated-Cube and η-fibre texture components and at the same time strengthens X1-and X2-fibre texture components which are shear texture components and improve deep drawability.During the asymmetric cold rolling,the temperature increases due to friction,triggering recrystallisation processes and leading to larger grains.It is also confirmed that asymmetric cold rolling uses less rolling force and consequently less energy to produce a final material with better formability,particularly earing.
基金supported by the Nation Key Research and Development Program of China(No.2021YFB3701100).
文摘Hot deformation with high strain rate has been paid more attention due to its high efficiency and low cost,however,the strain rate dependent dynamic recrystallization(DRX)and texture evolution in hot deformation process,which affect the formability of metals,are lack of study.In this work,the DRX behavior and texture evolution of Mg-8Gd-1Er-0.5Zr alloy hot compressed with strain rates of 0.1 s^(−1),1 s^(−1),10 s^(−1) and 50 s^(−1) are studied,and the corresponding dominant mechanisms for DRX and texture weakening are discussed.Results indicated the DRX fraction was 20%and the whole texture intensity was 16.89 MRD when the strain rate was 0.1 s^(−1),but they were 76%and 6.55 MRD,respectively,when the strain rate increased to 50 s^(−1).The increment of DRX fraction is suggested to result from the reduced DRX critical strain and the increased dislocation density as well as velocity,while the weakened whole texture is attributed to the increased DRX grains.At the low strain rate of 0.1 s^(−1),discontinuous DRX(DDRX)was the dominant,but the whole texture was controlled by the deformed grains with the preferred orientation of{0001}⊥CD,because the number of DDRX grains was limited.At the high strain rate of 50 s^(−1),continuous DRX(CDRX)and twin-induced DRX(TDRX)were promoted,and more DRX grains resulted in orientation randomization.The whole texture was mainly weakened by CDRX and TDRX grains,in which CDRX plays a major role.The results of present work are significant for understanding the hot workability of Mg-RE alloys with a high strain rate.
基金by National Natural Science Foundation of China(Nos.52271103,52334010 and 52271031)Jilin Scientific and Technological Development Program(Nos.20220301026GX,20210201115GX and 20210301041GX).
文摘Conventional rolled Mg-Al alloy sheets typically exhibit strong basal textures that remain and may even strengthen after recrystallization annealing due to the preferential growth of basal-oriented grains,resulting in poor formability at room temperature.Therefore,the knowledge of recrystallization and grain growth is critical for modifying textures of Mg-Al alloy sheets.The static recrystallization and texture evolution in a cold-rolled dilute Mg-1Al(wt.%)alloy during various annealed temperatures ranging from 300℃ to 450℃,have been investigated using the quasi in-situ electron backscatter diffraction(EBSD)method.The as-rolled Mg-1Al alloy shows a dominant basal texture,which weakens and broadens in the rolling direction(RD)during the subsequent annealing,accompanied by the formation of{1010}texture component.Particularly,the {1010} texture component is more pronounced after annealing at high temperatures.The quasi in-situ EBSD results show that recrystallized grains are mainly induced by shear bands,which exhibit a wide spectrum of orientations with c-axis tilt angles ranging 20°-45°from the normal direction(ND).Orientations of shear band-induced recrystallized grains are retained during the entire recrystallization process,resulting in a reduction in the texture intensity.Moreover,recrystallized grains belonging to the {1010}texture component grow preferentially compared to those with other orientations,which is attributed to low energy grain boundaries,especially grain boundaries with∼30°misorientation angles.Furthermore,the high temperature annealing facilitates the rapid growth of grain boundaries having a 30°misorientation angle,leading to the occurrence of distinct {1010} texture after annealing at 450℃ for 1 h.The results provide insights for texture modification of rare earth-free low-alloyed Mg alloys by controlling annealing parameters.
基金supported by the project“GEF9874:Strengthening Coordinated Approaches to Reduce Invasive Alien Species(lAS)Threats to Globally Significant Agrobiodiversity and Agroecosystems in China”funding from the Excellent Talent Training Funding Project in Dongcheng District,Beijing,with project number 2024-dchrcpyzz-9.
文摘Ecological monitoring vehicles are equipped with a range of sensors and monitoring devices designed to gather data on ecological and environmental factors.These vehicles are crucial in various fields,including environmental science research,ecological and environmental monitoring projects,disaster response,and emergency management.A key method employed in these vehicles for achieving high-precision positioning is LiDAR(lightlaser detection and ranging)-Visual Simultaneous Localization and Mapping(SLAM).However,maintaining highprecision localization in complex scenarios,such as degraded environments or when dynamic objects are present,remains a significant challenge.To address this issue,we integrate both semantic and texture information from LiDAR and cameras to enhance the robustness and efficiency of data registration.Specifically,semantic information simplifies the modeling of scene elements,reducing the reliance on dense point clouds,which can be less efficient.Meanwhile,visual texture information complements LiDAR-Visual localization by providing additional contextual details.By incorporating semantic and texture details frompaired images and point clouds,we significantly improve the quality of data association,thereby increasing the success rate of localization.This approach not only enhances the operational capabilities of ecological monitoring vehicles in complex environments but also contributes to improving the overall efficiency and effectiveness of ecological monitoring and environmental protection efforts.
基金Inner Mongolia Natural Science Foundation Project(2020LH05028)。
文摘Impact of texture type on the magnetic properties of ultrahigh density perpendicular magnetic recording media L1_(0)-FePt thin film was investigated,so were the texture formation and evolution mechanism.Reuss,Voigt,and Hill models were used to determine the anisotropic elastic modulus of L1_(0)-FePt thin film with fiber texture.Then,the elastic strain energies of thin films under various stress conditions were calculated.Results reveal that the stress condition has a significant influence on the fiber texture evolution.When the L1_(0)-FePt thin film is subjected to compressive in-plane strain prior to ordering phase transformation,the formation of{100}fiber texture is promoted.On the contrary,the ordering phase transformation under tensile in-plane strain promotes the{001}fiber texture formation.
基金Tral Science Foundation of China(Nos.52271103,52334010and 52271031)Partial financial support came from JilinScientific and Technological Development Program(No.20220301026GX)Program for the Central UniversityYouth Innovation Team。
文摘In this work,a good balance of strength and ductility(a yield strength of 185 MPa and a uniform elongation of 20%)has been obtained in a dilute Mg-1.8Zn-0.3Y-0.3Ca-0.3Zr(wt.%)alloy using hard plate rolling(HPR)followed by annealing,with a low anisotropy in mechanical properties.More importantly,the HPR-annealed alloy shows an excellent formability at the same time,i.e.,the index Erichsen(I.E.)value reaches 7.9 mm(the Erichsen cupping test)at room temperature,which is higher compared with the Mg-1.8Zn-0.3Y-0.3Ca0.3Zr alloy produced by conventional multi-pass rolling(CR)followed by annealing.The excellent synergy of strength and formability of the HPR-annealed alloy is mainly attributed to a weak elliptical ring texture,as well as finer and denser Zn_(2)Zr_(3)precipitates.The formation of weak elliptical ring texture is related to the preferential co-segregation of Zn and Ca elements at boundaries of basal grains with smal misorientation angles during annealing,which inhibits the growth of basal grains and promotes the preferential growth of non-basal grains At the same time,in comparison with the CR-annealed alloy,the HPR-annealed alloy contains finer and denser Zn_(2)Zr_(3)precipitates that ar less likely to become sources of cracks,leading to the higher strength and formability of the HPR-annealed alloy.The results in this work can provide reference for the development of high strength Mg alloy sheets with excellent room temperature formability,which also shed light on mitigating planar anisotropy in mechanical properties for Mg alloy sheets.
基金supports from the projects by the NSFC[51771166]the Hebei Natural Science Foundation[E2019203452,E2021203011]+3 种基金the key project of department of education of Hebei province[ZD2021107]project of the central government guiding local science and technology development[216Z1001G]Cultivation Project for Basic Research and Innovation of Yanshan University[2021LGZD002]project of State Key Laboratory of Materials Processing and Die&Mould Technology[P2023-004]are gratefully acknowledged.
文摘Molecular dynamics(MD)simulation is employed to investigate the deformation behavior under various loading paths and strain rates of nanocrystalline magnesium(NC Mg)with[0001]texture.Atomic-scale structural evolution of NC Mg was performed under uniaxial and biaxial loadings.In tension process,compression twins and basal slip dominate,while the compression process is dominated by tension twins.The activation mechanism of twinning is highly sensitive to the loading path and grain orientation.Meanwhile,the effect of strain rate on the structural evolution of NC Mg was investigated.It is found that the effect of strain rate on the plastic deformation of NC Mg is reflected through the plasticity delays and the way to release the stress.As the strain rate decreases,the plastic deformation mechanism gradually changes from intragranular to grain boundary.Some significant potential deformation mechanisms in the loading process were studied.It is observed that{1121}twins nucleated inside the grains,and the thickening process is completed by basal〈a〉slip of the twin boundary.The strain compatibility between twins is automatically optimized with loading.Moreover,the detwinning mechanism caused by the interaction between twins and basal stacking faults is clarified.
基金supported by the Henan Key Laboratory of Intelligent Manufacturing Equipment Integration for Superhard Materials(Grant No.JDKJ2022-01)the National Natural Science Foundation of China(Grant Nos.52035009 and 51761135106)+1 种基金the 2020 Mobility Programme of the Sino-German Center for Research Promotion(Grant No.M-0396)the“111”project by the State Administration of Foreign Experts Affairs and the Ministry of Education of China(Grant No.B07014).
文摘Gallium nitride(GaN),as a third-generation semiconductor,is highly attractive due to its exceptional physical and chemical properties.Laser direct writing offers an efficient method for the precise processing of hard and brittle materials.In this work,various types of surface microtexture were processed on GaN epilayers using a femtosecond laser with a wavelength of 1030 nm.The effects of the laser energy,singlepulse interval,number of pulses,and number of scan passes on groove machining were investigated with a view to achieving high-quality micromachining.The depth,width,surface morphology,and roughness of the grooves were analyzed using scanning electron microscopy,laser scanning confocal microscopy,and atomic force microscopy.Damage and stress were characterized at the microscale using Raman spectroscopy.High-quality precision machining of different types of periodic surface microtexture at 40 mW laser power was achieved by controlling the process parameters and laser trajectory.Finally,an initial exploration was conducted to examine vector-light-based microand nanostructure processing.The findings demonstrate the potential of femtosecond lasers for efficient micromachining of hard and brittle materials without the creation of heat-affected zones or microcracks.The high-quality textured structures achieved through this processing technique have broad and promising applications in optoelectronic devices and tribology.
基金financially supported by the Fundamental Research Program of the Korea Institute of Materials Science(Grant No.360–05–04-PNKA540)the National Research Foundation of Korea(CRC23011–210).
文摘The microstructure and texture evolution of Mg-xAl-1Zn-1Y-0.1Mn alloys are systematically analyzed.There is no effect of Al addition on grain refinement in the Mg-1Zn-1Y-0.1Mn alloy,but the addition of 0.5 wt.%or more Al element dramatically changes texture from a weak texture to a strong basal texture.The predominant second phase particle of Mg_(3)Zn_(3)Y_(2) phase in the Mg-1Zn-1Y-0.1Mn alloy changes to Al_(2)Y phase by the addition of only 0.1 wt.%Al element,and the concentrations of dissolved Y element in the 0Al,0.1Al,0.3Al,0.5Al and 1Al alloys are 0.50,0.31,0.23,0.15 and 0.06 wt.%,respectively.Although the 0.5 wt.%or more Al-added alloys have higher Schmid factor for prismatic(a)slip than the 0.3 wt.%or less Al-added alloys,the lower Al containing alloys show much higher activity of prismatic (a)slip than the higher Al containing alloys.It demonstrates that the addition of high amount of Al element in Mg-Zn-RE alloy dramatically decrease the dissolved Y element,resulting in a significant deterioration of activity of prismaticslip and consequently a poor formability at room temperature.
基金supported by the Demonstration System for High Resolution Meteorological Application(Ⅱ)[grant number 32-Y30F08-9001-20/22]the National Natural Science Foundation of China[grant numbers 12292981 and 12292984]。
文摘Early detection of convective clouds is vital for minimizing hazardous impacts.Forecasting convective initiation(CI)using current multispectral geostationary meteorological satellites is often challenged by high false-alarm rates and missed detections caused by limited resolution.In contrast,high-resolution earth observation satellites offer more detailed texture information,improving early detection capabilities.The authors propose a novel methodology that integrates the advanced features of China’s latest-generation satellites,Gaofen-4(GF-4)and Fengyun-4A(FY-4A).This fusion method retains GF’s high-resolution details and FY-4A’s multispectral information.Two cases from different observational scenarios and weather conditions under GF-4’s staring mode were carried out to compare the CI forecast results based on fused data and solely on FY-4A data.The fused data demonstrated superior performance in detecting smaller-scale convective clouds,enabling earlier forecasting with a lead time of 15–30 minutes,and more accurate location identification.Integrating high-resolution earth observation satellites into early convective cloud detection provides valuable insights for forecasters and decision-makers,particularly given the current resolution limitations of geostationary meteorological satellites.
基金supported by National Natural Science Foundation of China(Grant No.52205344,51925401)Postdoctoral Research Foundation of China(Grant No.2023M732398)+1 种基金National Key Laboratory Foundation of Science and Technology on Materials under Shock and Impact(Grant No.WDZC2023-1)Key Research and Development Program of Shandong Province(Grant No.2023CXPT066).
文摘This work managed the extrusion strain path by designing various extrusion die cavities,successfully realizing the texture modification for the ZK60 magnesium alloy.The mechanisms involving the texture dependence on the extrusion die cavity as well as their effects on the mechanical properties were emphatically investigated.Results showed that dynamic recrystallization refined the grain size and improved the microstructure homogeneity in the three extrusion specimens,but did not produce too large microstructure differences.By comparison,significant texture differences developed owing to the various extrusion die cavities,which here were mainly reflected in the strong or weak texture components for the c-axes//TD and the c-axes//ND.Such texture differences started from the deformation texture instead of the recrystallization texture whose roles only consisted in dispersing the texture component and reducing the texture intensity.The results from the finite element analysis and the visco-plastic self-consistent model indicated that,in order to accommodate the different strain components induced by the extrusion die cavities,slip systems or tension twinning were activated differently,and this was the critical reason causing the above texture differences.One modified Hall-Petch relationship was adopted to analyze the conjoint effects of grain refinement and texture variation on the yield stress.Additionally,the quantitative results about deformation mechanism activation fractions demonstrated that the texture variations influenced the competition relationships between the twinning induced deformation and the slip dominant deformation,and the former generally produced the lower yield stress and the increasing stage of strain hardening rate,while the latter produced the higher yield stress and the continuous decline of strain hardening rate.
基金financial support provided by Key Research and Development Program of Heilongjiang(Grant No.2022ZX01A01)Natural Science Found of Heilongjiang Province(LH2022E080)。
文摘The tension-compression asymmetry presents notable challenges for the application of magnesium alloys in many fields.In this study,the solid-solution treated Mg-8.5Gd-4.5Y-0.8Zn-0.4Zr alloy's tension-compression asymmetry was examined using optical microscope(OM),x-ray diffraction(XRD),viscoplastic self-consistent(VPSC)modeling,and electron backscatter diffraction(EBSD).The VPSC hardening parameters were significantly adjusted based on the Schmid factor of deformation modes in rare earth magnesium(Mg-RE)alloy,which came from the EBSD data.Excellent agreement was found between the modified VPSC model's calculation results,especially the stress-strain curves and pole figures.The alloy exhibited good strength with a negligible tension-compression asymmetry and an impressive 0.98 ratio of compressive yield strength to tensile yield strength(CYS/TYS).The main cause could be attributed to the unusual texture of(11-20)<0001>in alloy,which eliminated the imbalance in tension and compression deformation by having a negative effect on the activation of{10-12}twinning in tensile and a positive effect in compressive deformation.The activation level of{10-12}twinning was 0.37 and 0.40calculated by VPSC model,in the plastic deformation of tension and compression,respectively;in the tensile and compression samples,the EBSD data indicated that approximately 31.9%and 31.1%(area proportion)of the grains were deformed with twins,respectively.Both tension and compression deformation showed the{10-12}twinning in the early stage of deformation,which transformed to{11-22}twinning in the later stage.The considerable activation of pyramidal during the later stages of deformation endowed the alloy with good ductility.
基金funded by the National Key Research and Development Program of China(No.2022YFB3705504)the Key Research and Development Program of Hebei Province,China(No.21310301D)+1 种基金the Central Government Guidance Fund for Local Science and Technology,China(No.226Z1003G)the Natural Science Foundation Innovation Group Funding Project of Hebei Province,China(No.E2021203011).
文摘Traditional symmetrical rolling often induces through-thickness gradient microstructures and textures.In this study,ultra-high purity(99.999 wt.%)tantalum(Ta)served as a model material to address the texture gradient issue by employing dynamic offsets and shear force adjustment rolling(DS rolling)as an advanced rolling technique.The strain and stress distributions in Ta plates for DS rolling and symmetrical rolling processes were analyzed using Deform 3D software.Through-thickness textures and microstructures were characterized via electron backscatter diffraction.The results revealed that DS rolling effectively solved the problem of texture gradient by increasing the average shear strain from 0.05 to 0.56.In turn,the shear stress reduced the energy storage orientation dependence of{100}and{111}grains.Furthermore,DS rolling refined the recrystallized grains on an average of 30.9%.
基金Project supported by“Unveiled the List of Commanders”Key Core Common Technology Projects of Ji’an,ChinaProject(LJKMZ20220591)supported by the Basic Scientific Research Project of the Education Department of Liaoning Province,ChinaProject(CSTB2023NSCQ-LZX0116)supported by the Natural Science Foundation Joint Fund for Innovation and Development Projects of Chongqing,China。
文摘The ultrafine copper wire with a diameter of 18μm is prepared via cold drawing process from the single crystal downcast billet(Φ8 mm),taking a drawing strain to 12.19.In this paper,in-depth investigation of the microstructure feature,texture evolution,mechanical properties,and electrical conductivity of ultrafine wires ranging fromΦ361μm toΦ18μm is performed.Specially,the microstructure feature and texture type covering the whole longitudinal section of ultrafine wires are elaborately characterized.The results show that the average lamella thickness decreases from 1.63μm to 102 nm during the drawing process.Whereas,inhomogeneous texture evolution across different wire sections was observed.The main texture types of copper wires are comprised of<111>,<001>and<112>orientations.Specifically,the peripheral region is primarily dominated by<111>and<112>,while the central region is dominated by<001>and<111>.As the drawing strain increases,the volume fraction of hard orientation<111>with low Schmid factor increases,where notably higher fraction of<111>is resulted from the consumption of<112>and<001>for the wire ofΦ18μm.For drawn copper wire of 18μm,superior properties are obtained with a tensile strength of 729.8 MPa and an electrical conductivity of 86.9%IACS.Furthermore,it is found that grain strengthening,dislocation strengthening,and texture strengthening are three primary strengthening mechanisms of drawn copper wire,while the dislocation density is the main factor on the reducing of conductivity.
文摘The evolution of microstructure and texture in Mg-3Al-1Zn-1Ca alloy sheets subjected to in-plane shear(IPS)loading was investigated using experimental techniques and viscoplastic self-consistent(VPSC)modeling.The specimens were deformed under varying degrees of IPS strain(γ12=0.05,0.10,and 0.15)using a customized jig.Electron backscatter diffraction(EBSD)observations revealed profuse tensile twinning(TTW)even at an IPS strain of 0.05,with its intensity continuously increased as the IPS strain increased.The TTWs progressively engulfed parent grains with increasing shear strain,evolving into an unusual deformation twin morphology.Furthermore,VPSC model predictions confirmed basal slip as the dominant deformation mode at low IPS strains,transitioning to prismatic slip dominance at higher IPS strains.The activity of the TTW mode was significantly higher during the initial stages of IPS strain and saturated to lower values at higher strains.VPSC simulation results also indicated preferential shear accumulation on a single twin system,explaining the phenomenon of a single twin variant engulfing a parent grain.Additionally,the influence of individual slip and twin modes on texture evolution was evaluated through orientation tracking of representative grains at various shear strain increments using VPSC simulation.The simulation results quantitatively highlighted the activities of basal slip,prismatic slip,and tensile twinning,establishing a correlation between texture evolution and the underlying deformation mechanisms.
基金funding from the National Natural Science Foundation of China under Grant No 52275327。
文摘The work aims to investigate the formation and transformation mechanism of non-basal texture in the extruded Mg alloys.With this purpose a pure Mg as reference and eight Mg-Gd binary alloys with the Gd concentration ranging from 0.5 wt.%to 18 wt.%were prepared for extrusion.This study shows that the basal fiber texture in pure Mg transited into RE(rare earth)texture in diluted Mg-Gd alloys and into the abnormal C-texture in high-concentration Mg-Gd alloys.In pure Mg,discontinuous dynamic recrystallization plays a predominant role during the extrusion process,resulting in the formation of a typical basal fiber texture.Alloying with high concentration of Gd impedes the dynamic recrystallization process,facilitating the heterogeneous nucleation of shear bands as well as the dynamic recrystallization within shear bands.Dynamic recrystallized grains within shear bands nucleate with a similar orientation to the host deformed parent grains and gradually tilt their c-axis to the extrusion direction during growth by absorbing dislocations,leading to the formation of either the REtexture orientation or the C-texture orientation,depending on the stored energy within shear bands.The analysis aided by IGMA and TEM characterization reveals that the shear bands originate from the extensive but heterogeneous activation of pyramidal I slip.Tensile tests illustrate a close correlation between the fracture elongation and texture types.A comprehensive understanding of the formation and transformation mechanism of different texture components in Mg alloys holds significant importance for the design of high-performance Mg alloys by texture engineering.
基金Project(52005362) supported by the National Natural Science Foundation of ChinaProjects(202303021221005,202303021211045) supported by the Natural Science Foundation of Shanxi Province,China+1 种基金Project(202402003) supported by the Patent Commercialization Program of Shanxi Province,ChinaProject supported by the Key Research and Development Plan of Xinzhou City,China。
文摘The deformation behavior of hot-rolled AZ31 magnesium(Mg)alloy sheet was analyzed when subjected to uniaxial tension along its normal direction at temperatures ranging from 100 to 400℃and strain rates ranging from 0.5 to 100 mm/min.Based on the stress−strain curves and the dynamic material model,the hot processing map was established,which demonstrates that the power dissipation factor(η)is the most sensitive to strain rate at 400℃via absorption of dislocations.At 400℃,sample at 0.5 mm/min possessesηof 0.89 because of its lower kernel average misorientation(KAM)value of 0.51,while sample at 100 mm/min possessesηof 0.46 with a higher KAM value of 1.147.In addition,the flow stress presents a slight decrease of 25.94 MPa at 10 mm/min compared to that at 100 mm/min and 100℃.The reasons are twofold:a special~34°texture component during 100℃-100 mm/min favoring the activation of basal slip,and dynamic recrystallization(DRX)also providing softening effect to some extent by absorbing dislocations.Difference in activation of basal slip among twin laminas during 100℃-100 mm/min results in deformation inhomogeneity within the grains,which generates stress that helps matrix grains tilt to a direction favorable to basal slip,forming the special~34°texture component.
基金the Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(No.48)。
文摘It is significant to process textures with special functions similar to animal surfaces based on bionics and improve the friction stability and contact comfort of contact surfaces for the surface texture design of tactile products.In this paper,a bionic hexagonal micro-convex texture was prepared on an acrylic surface by laser processing.The friction mechanism of a finger touching the bionic hexagonal micro-convex texture under different touch speeds and pressures,and the effect of the height of the texture on tactile perception were investigated by finite element,subjective evaluation,friction,and EEG tests.The results showed that the deformation friction was the main friction component when the finger touched the bionic hexagonal texture,and the slipperiness and friction factor showed a significant negative correlation.As the touch speed decreased or the touch force increased,the hysteresis friction of the fingers as well as the interlocking friction increased,and the slipperiness perception decreased.The bionic hexagonal texture with higher convexity caused a higher friction factor,lower slipperiness perception,and lower P300 peak.Hexagonal textures with lower convexity,lower friction factor,and higher slipperiness perception required greater brain attentional resources and intensity of tactile information processing during tactile perception.
基金supported by the National Natural Science Foundation of China(Nos.52274393,52074200 and 12102310)the Key R&D Program of Hubei Province(No.2023BAB141).
文摘A grain-oriented silicon steel was normalized with a novel high magnetic field using one-stage cooling process.The effect of high-magnetic-field normalizing on the microstructures and textures was studied with a hot-rolled sheet as initial material.It was found that recrystallization and the grain growth were enhanced owing to the external magnetic field driving force.The angle between Goss orientation and magnetic field direction was small,resulting in a high nucleation rate of Goss grains,and hence,the intensity of Goss texture was increased and the deviation angle of Goss grains was reduced after high-magnetic-field normalizing.Furthermore,the migration of dislocation was promoted with an external magnetic field driving force and the density of dislocation decreased,reducing the proportion of low-angle grain boundaries around the Goss grains.The enhancement of recrystallization process and grain growth increased the proportion of high-energy grain boundaries and high-angle grain boundaries,providing a favorable condition for the growth of Goss grains.
